| /* MN10300 IRQ flag handling |
| * |
| * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved. |
| * Written by David Howells (dhowells@redhat.com) |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public Licence |
| * as published by the Free Software Foundation; either version |
| * 2 of the Licence, or (at your option) any later version. |
| */ |
| |
| #ifndef _ASM_IRQFLAGS_H |
| #define _ASM_IRQFLAGS_H |
| |
| #include <asm/cpu-regs.h> |
| #ifndef __ASSEMBLY__ |
| #include <linux/smp.h> |
| #endif |
| |
| /* |
| * interrupt control |
| * - "disabled": run in IM1/2 |
| * - level 0 - kernel debugger |
| * - level 1 - virtual serial DMA (if present) |
| * - level 5 - normal interrupt priority |
| * - level 6 - timer interrupt |
| * - "enabled": run in IM7 |
| */ |
| #define MN10300_CLI_LEVEL (CONFIG_LINUX_CLI_LEVEL << EPSW_IM_SHIFT) |
| |
| #ifndef __ASSEMBLY__ |
| |
| static inline unsigned long arch_local_save_flags(void) |
| { |
| unsigned long flags; |
| |
| asm volatile("mov epsw,%0" : "=d"(flags)); |
| return flags; |
| } |
| |
| static inline void arch_local_irq_disable(void) |
| { |
| asm volatile( |
| " and %0,epsw \n" |
| " or %1,epsw \n" |
| " nop \n" |
| " nop \n" |
| " nop \n" |
| : |
| : "i"(~EPSW_IM), "i"(EPSW_IE | MN10300_CLI_LEVEL) |
| : "memory"); |
| } |
| |
| static inline unsigned long arch_local_irq_save(void) |
| { |
| unsigned long flags; |
| |
| flags = arch_local_save_flags(); |
| arch_local_irq_disable(); |
| return flags; |
| } |
| |
| /* |
| * we make sure arch_irq_enable() doesn't cause priority inversion |
| */ |
| extern unsigned long __mn10300_irq_enabled_epsw[]; |
| |
| static inline void arch_local_irq_enable(void) |
| { |
| unsigned long tmp; |
| int cpu = raw_smp_processor_id(); |
| |
| asm volatile( |
| " mov epsw,%0 \n" |
| " and %1,%0 \n" |
| " or %2,%0 \n" |
| " mov %0,epsw \n" |
| : "=&d"(tmp) |
| : "i"(~EPSW_IM), "r"(__mn10300_irq_enabled_epsw[cpu]) |
| : "memory", "cc"); |
| } |
| |
| static inline void arch_local_irq_restore(unsigned long flags) |
| { |
| asm volatile( |
| " mov %0,epsw \n" |
| " nop \n" |
| " nop \n" |
| " nop \n" |
| : |
| : "d"(flags) |
| : "memory", "cc"); |
| } |
| |
| static inline bool arch_irqs_disabled_flags(unsigned long flags) |
| { |
| return (flags & (EPSW_IE | EPSW_IM)) != (EPSW_IE | EPSW_IM_7); |
| } |
| |
| static inline bool arch_irqs_disabled(void) |
| { |
| return arch_irqs_disabled_flags(arch_local_save_flags()); |
| } |
| |
| /* |
| * Hook to save power by halting the CPU |
| * - called from the idle loop |
| * - must reenable interrupts (which takes three instruction cycles to complete) |
| */ |
| static inline void arch_safe_halt(void) |
| { |
| #ifdef CONFIG_SMP |
| arch_local_irq_enable(); |
| #else |
| asm volatile( |
| " or %0,epsw \n" |
| " nop \n" |
| " nop \n" |
| " bset %2,(%1) \n" |
| : |
| : "i"(EPSW_IE|EPSW_IM), "n"(&CPUM), "i"(CPUM_SLEEP) |
| : "cc"); |
| #endif |
| } |
| |
| #define __sleep_cpu() \ |
| do { \ |
| asm volatile( \ |
| " bset %1,(%0)\n" \ |
| "1: btst %1,(%0)\n" \ |
| " bne 1b\n" \ |
| : \ |
| : "i"(&CPUM), "i"(CPUM_SLEEP) \ |
| : "cc" \ |
| ); \ |
| } while (0) |
| |
| static inline void arch_local_cli(void) |
| { |
| asm volatile( |
| " and %0,epsw \n" |
| " nop \n" |
| " nop \n" |
| " nop \n" |
| : |
| : "i"(~EPSW_IE) |
| : "memory" |
| ); |
| } |
| |
| static inline unsigned long arch_local_cli_save(void) |
| { |
| unsigned long flags = arch_local_save_flags(); |
| arch_local_cli(); |
| return flags; |
| } |
| |
| static inline void arch_local_sti(void) |
| { |
| asm volatile( |
| " or %0,epsw \n" |
| : |
| : "i"(EPSW_IE) |
| : "memory"); |
| } |
| |
| static inline void arch_local_change_intr_mask_level(unsigned long level) |
| { |
| asm volatile( |
| " and %0,epsw \n" |
| " or %1,epsw \n" |
| : |
| : "i"(~EPSW_IM), "i"(EPSW_IE | level) |
| : "cc", "memory"); |
| } |
| |
| #else /* !__ASSEMBLY__ */ |
| |
| #define LOCAL_SAVE_FLAGS(reg) \ |
| mov epsw,reg |
| |
| #define LOCAL_IRQ_DISABLE \ |
| and ~EPSW_IM,epsw; \ |
| or EPSW_IE|MN10300_CLI_LEVEL,epsw; \ |
| nop; \ |
| nop; \ |
| nop |
| |
| #define LOCAL_IRQ_ENABLE \ |
| or EPSW_IE|EPSW_IM_7,epsw |
| |
| #define LOCAL_IRQ_RESTORE(reg) \ |
| mov reg,epsw |
| |
| #define LOCAL_CLI_SAVE(reg) \ |
| mov epsw,reg; \ |
| and ~EPSW_IE,epsw; \ |
| nop; \ |
| nop; \ |
| nop |
| |
| #define LOCAL_CLI \ |
| and ~EPSW_IE,epsw; \ |
| nop; \ |
| nop; \ |
| nop |
| |
| #define LOCAL_STI \ |
| or EPSW_IE,epsw |
| |
| #define LOCAL_CHANGE_INTR_MASK_LEVEL(level) \ |
| and ~EPSW_IM,epsw; \ |
| or EPSW_IE|(level),epsw |
| |
| #endif /* __ASSEMBLY__ */ |
| #endif /* _ASM_IRQFLAGS_H */ |