| /* |
| * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> |
| * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> |
| * |
| * Permission to use, copy, modify, and distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| * |
| */ |
| |
| /****************\ |
| GPIO Functions |
| \****************/ |
| |
| #include "ath5k.h" |
| #include "reg.h" |
| #include "debug.h" |
| |
| /* |
| * Set led state |
| */ |
| void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state) |
| { |
| u32 led; |
| /*5210 has different led mode handling*/ |
| u32 led_5210; |
| |
| /*Reset led status*/ |
| if (ah->ah_version != AR5K_AR5210) |
| AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG, |
| AR5K_PCICFG_LEDMODE | AR5K_PCICFG_LED); |
| else |
| AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_LED); |
| |
| /* |
| * Some blinking values, define at your wish |
| */ |
| switch (state) { |
| case AR5K_LED_SCAN: |
| case AR5K_LED_AUTH: |
| led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_PEND; |
| led_5210 = AR5K_PCICFG_LED_PEND | AR5K_PCICFG_LED_BCTL; |
| break; |
| |
| case AR5K_LED_INIT: |
| led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_NONE; |
| led_5210 = AR5K_PCICFG_LED_PEND; |
| break; |
| |
| case AR5K_LED_ASSOC: |
| case AR5K_LED_RUN: |
| led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_ASSOC; |
| led_5210 = AR5K_PCICFG_LED_ASSOC; |
| break; |
| |
| default: |
| led = AR5K_PCICFG_LEDMODE_PROM | AR5K_PCICFG_LED_NONE; |
| led_5210 = AR5K_PCICFG_LED_PEND; |
| break; |
| } |
| |
| /*Write new status to the register*/ |
| if (ah->ah_version != AR5K_AR5210) |
| AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led); |
| else |
| AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led_5210); |
| } |
| |
| /* |
| * Set GPIO inputs |
| */ |
| int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio) |
| { |
| if (gpio >= AR5K_NUM_GPIO) |
| return -EINVAL; |
| |
| ath5k_hw_reg_write(ah, |
| (ath5k_hw_reg_read(ah, AR5K_GPIOCR) & ~AR5K_GPIOCR_OUT(gpio)) |
| | AR5K_GPIOCR_IN(gpio), AR5K_GPIOCR); |
| |
| return 0; |
| } |
| |
| /* |
| * Set GPIO outputs |
| */ |
| int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio) |
| { |
| if (gpio >= AR5K_NUM_GPIO) |
| return -EINVAL; |
| |
| ath5k_hw_reg_write(ah, |
| (ath5k_hw_reg_read(ah, AR5K_GPIOCR) & ~AR5K_GPIOCR_OUT(gpio)) |
| | AR5K_GPIOCR_OUT(gpio), AR5K_GPIOCR); |
| |
| return 0; |
| } |
| |
| /* |
| * Get GPIO state |
| */ |
| u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio) |
| { |
| if (gpio >= AR5K_NUM_GPIO) |
| return 0xffffffff; |
| |
| /* GPIO input magic */ |
| return ((ath5k_hw_reg_read(ah, AR5K_GPIODI) & AR5K_GPIODI_M) >> gpio) & |
| 0x1; |
| } |
| |
| /* |
| * Set GPIO state |
| */ |
| int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val) |
| { |
| u32 data; |
| |
| if (gpio >= AR5K_NUM_GPIO) |
| return -EINVAL; |
| |
| /* GPIO output magic */ |
| data = ath5k_hw_reg_read(ah, AR5K_GPIODO); |
| |
| data &= ~(1 << gpio); |
| data |= (val & 1) << gpio; |
| |
| ath5k_hw_reg_write(ah, data, AR5K_GPIODO); |
| |
| return 0; |
| } |
| |
| /* |
| * Initialize the GPIO interrupt (RFKill switch) |
| */ |
| void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, |
| u32 interrupt_level) |
| { |
| u32 data; |
| |
| if (gpio >= AR5K_NUM_GPIO) |
| return; |
| |
| /* |
| * Set the GPIO interrupt |
| */ |
| data = (ath5k_hw_reg_read(ah, AR5K_GPIOCR) & |
| ~(AR5K_GPIOCR_INT_SEL(gpio) | AR5K_GPIOCR_INT_SELH | |
| AR5K_GPIOCR_INT_ENA | AR5K_GPIOCR_OUT(gpio))) | |
| (AR5K_GPIOCR_INT_SEL(gpio) | AR5K_GPIOCR_INT_ENA); |
| |
| ath5k_hw_reg_write(ah, interrupt_level ? data : |
| (data | AR5K_GPIOCR_INT_SELH), AR5K_GPIOCR); |
| |
| ah->ah_imr |= AR5K_IMR_GPIO; |
| |
| /* Enable GPIO interrupts */ |
| AR5K_REG_ENABLE_BITS(ah, AR5K_PIMR, AR5K_IMR_GPIO); |
| } |
| |