| //===================================================== |
| // CopyRight (C) 2007 Qualcomm Inc. All Rights Reserved. |
| // |
| // |
| // This file is part of Express Card USB Driver |
| // |
| // $Id: |
| //==================================================== |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/usb.h> |
| #include "ft1000_usb.h" |
| #include <linux/types.h> |
| |
| #define HARLEY_READ_REGISTER 0x0 |
| #define HARLEY_WRITE_REGISTER 0x01 |
| #define HARLEY_READ_DPRAM_32 0x02 |
| #define HARLEY_READ_DPRAM_LOW 0x03 |
| #define HARLEY_READ_DPRAM_HIGH 0x04 |
| #define HARLEY_WRITE_DPRAM_32 0x05 |
| #define HARLEY_WRITE_DPRAM_LOW 0x06 |
| #define HARLEY_WRITE_DPRAM_HIGH 0x07 |
| |
| #define HARLEY_READ_OPERATION 0xc1 |
| #define HARLEY_WRITE_OPERATION 0x41 |
| |
| //#define JDEBUG |
| |
| static int ft1000_reset(struct net_device *ft1000dev); |
| static int ft1000_submit_rx_urb(struct ft1000_info *info); |
| static int ft1000_start_xmit(struct sk_buff *skb, struct net_device *dev); |
| static int ft1000_open (struct net_device *dev); |
| static struct net_device_stats *ft1000_netdev_stats(struct net_device *dev); |
| static int ft1000_chkcard (struct ft1000_device *dev); |
| |
| static u8 tempbuffer[1600]; |
| |
| #define MAX_RCV_LOOP 100 |
| |
| //--------------------------------------------------------------------------- |
| // Function: ft1000_control |
| // |
| // Parameters: ft1000_device - device structure |
| // pipe - usb control message pipe |
| // request - control request |
| // requesttype - control message request type |
| // value - value to be written or 0 |
| // index - register index |
| // data - data buffer to hold the read/write values |
| // size - data size |
| // timeout - control message time out value |
| // |
| // Returns: STATUS_SUCCESS - success |
| // STATUS_FAILURE - failure |
| // |
| // Description: This function sends a control message via USB interface synchronously |
| // |
| // Notes: |
| // |
| //--------------------------------------------------------------------------- |
| static int ft1000_control(struct ft1000_device *ft1000dev, unsigned int pipe, |
| u8 request, u8 requesttype, u16 value, u16 index, |
| void *data, u16 size, int timeout) |
| { |
| u16 ret; |
| |
| if ((ft1000dev == NULL) || (ft1000dev->dev == NULL)) { |
| DEBUG("ft1000dev or ft1000dev->dev == NULL, failure\n"); |
| return -ENODEV; |
| } |
| |
| ret = usb_control_msg(ft1000dev->dev, pipe, request, requesttype, |
| value, index, data, size, LARGE_TIMEOUT); |
| |
| if (ret > 0) |
| ret = 0; |
| |
| return ret; |
| } |
| |
| //--------------------------------------------------------------------------- |
| // Function: ft1000_read_register |
| // |
| // Parameters: ft1000_device - device structure |
| // Data - data buffer to hold the value read |
| // nRegIndex - register index |
| // |
| // Returns: STATUS_SUCCESS - success |
| // STATUS_FAILURE - failure |
| // |
| // Description: This function returns the value in a register |
| // |
| // Notes: |
| // |
| //--------------------------------------------------------------------------- |
| |
| int ft1000_read_register(struct ft1000_device *ft1000dev, u16* Data, |
| u16 nRegIndx) |
| { |
| int ret = STATUS_SUCCESS; |
| |
| ret = ft1000_control(ft1000dev, |
| usb_rcvctrlpipe(ft1000dev->dev, 0), |
| HARLEY_READ_REGISTER, |
| HARLEY_READ_OPERATION, |
| 0, |
| nRegIndx, |
| Data, |
| 2, |
| LARGE_TIMEOUT); |
| |
| return ret; |
| } |
| |
| //--------------------------------------------------------------------------- |
| // Function: ft1000_write_register |
| // |
| // Parameters: ft1000_device - device structure |
| // value - value to write into a register |
| // nRegIndex - register index |
| // |
| // Returns: STATUS_SUCCESS - success |
| // STATUS_FAILURE - failure |
| // |
| // Description: This function writes the value in a register |
| // |
| // Notes: |
| // |
| //--------------------------------------------------------------------------- |
| int ft1000_write_register(struct ft1000_device *ft1000dev, u16 value, |
| u16 nRegIndx) |
| { |
| int ret = STATUS_SUCCESS; |
| |
| ret = ft1000_control(ft1000dev, |
| usb_sndctrlpipe(ft1000dev->dev, 0), |
| HARLEY_WRITE_REGISTER, |
| HARLEY_WRITE_OPERATION, |
| value, |
| nRegIndx, |
| NULL, |
| 0, |
| LARGE_TIMEOUT); |
| |
| return ret; |
| } |
| |
| //--------------------------------------------------------------------------- |
| // Function: ft1000_read_dpram32 |
| // |
| // Parameters: ft1000_device - device structure |
| // indx - starting address to read |
| // buffer - data buffer to hold the data read |
| // cnt - number of byte read from DPRAM |
| // |
| // Returns: STATUS_SUCCESS - success |
| // STATUS_FAILURE - failure |
| // |
| // Description: This function read a number of bytes from DPRAM |
| // |
| // Notes: |
| // |
| //--------------------------------------------------------------------------- |
| |
| int ft1000_read_dpram32(struct ft1000_device *ft1000dev, u16 indx, u8 *buffer, |
| u16 cnt) |
| { |
| int ret = STATUS_SUCCESS; |
| |
| ret = ft1000_control(ft1000dev, |
| usb_rcvctrlpipe(ft1000dev->dev, 0), |
| HARLEY_READ_DPRAM_32, |
| HARLEY_READ_OPERATION, |
| 0, |
| indx, |
| buffer, |
| cnt, |
| LARGE_TIMEOUT); |
| |
| return ret; |
| } |
| |
| //--------------------------------------------------------------------------- |
| // Function: ft1000_write_dpram32 |
| // |
| // Parameters: ft1000_device - device structure |
| // indx - starting address to write the data |
| // buffer - data buffer to write into DPRAM |
| // cnt - number of bytes to write |
| // |
| // Returns: STATUS_SUCCESS - success |
| // STATUS_FAILURE - failure |
| // |
| // Description: This function writes into DPRAM a number of bytes |
| // |
| // Notes: |
| // |
| //--------------------------------------------------------------------------- |
| int ft1000_write_dpram32(struct ft1000_device *ft1000dev, u16 indx, u8 *buffer, |
| u16 cnt) |
| { |
| int ret = STATUS_SUCCESS; |
| |
| if (cnt % 4) |
| cnt += cnt - (cnt % 4); |
| |
| ret = ft1000_control(ft1000dev, |
| usb_sndctrlpipe(ft1000dev->dev, 0), |
| HARLEY_WRITE_DPRAM_32, |
| HARLEY_WRITE_OPERATION, |
| 0, |
| indx, |
| buffer, |
| cnt, |
| LARGE_TIMEOUT); |
| |
| return ret; |
| } |
| |
| //--------------------------------------------------------------------------- |
| // Function: ft1000_read_dpram16 |
| // |
| // Parameters: ft1000_device - device structure |
| // indx - starting address to read |
| // buffer - data buffer to hold the data read |
| // hightlow - high or low 16 bit word |
| // |
| // Returns: STATUS_SUCCESS - success |
| // STATUS_FAILURE - failure |
| // |
| // Description: This function read 16 bits from DPRAM |
| // |
| // Notes: |
| // |
| //--------------------------------------------------------------------------- |
| int ft1000_read_dpram16(struct ft1000_device *ft1000dev, u16 indx, u8 *buffer, |
| u8 highlow) |
| { |
| int ret = STATUS_SUCCESS; |
| u8 request; |
| |
| if (highlow == 0) |
| request = HARLEY_READ_DPRAM_LOW; |
| else |
| request = HARLEY_READ_DPRAM_HIGH; |
| |
| ret = ft1000_control(ft1000dev, |
| usb_rcvctrlpipe(ft1000dev->dev, 0), |
| request, |
| HARLEY_READ_OPERATION, |
| 0, |
| indx, |
| buffer, |
| 2, |
| LARGE_TIMEOUT); |
| |
| return ret; |
| } |
| |
| //--------------------------------------------------------------------------- |
| // Function: ft1000_write_dpram16 |
| // |
| // Parameters: ft1000_device - device structure |
| // indx - starting address to write the data |
| // value - 16bits value to write |
| // hightlow - high or low 16 bit word |
| // |
| // Returns: STATUS_SUCCESS - success |
| // STATUS_FAILURE - failure |
| // |
| // Description: This function writes into DPRAM a number of bytes |
| // |
| // Notes: |
| // |
| //--------------------------------------------------------------------------- |
| int ft1000_write_dpram16(struct ft1000_device *ft1000dev, u16 indx, u16 value, u8 highlow) |
| { |
| int ret = STATUS_SUCCESS; |
| u8 request; |
| |
| if (highlow == 0) |
| request = HARLEY_WRITE_DPRAM_LOW; |
| else |
| request = HARLEY_WRITE_DPRAM_HIGH; |
| |
| ret = ft1000_control(ft1000dev, |
| usb_sndctrlpipe(ft1000dev->dev, 0), |
| request, |
| HARLEY_WRITE_OPERATION, |
| value, |
| indx, |
| NULL, |
| 0, |
| LARGE_TIMEOUT); |
| |
| return ret; |
| } |
| |
| //--------------------------------------------------------------------------- |
| // Function: fix_ft1000_read_dpram32 |
| // |
| // Parameters: ft1000_device - device structure |
| // indx - starting address to read |
| // buffer - data buffer to hold the data read |
| // |
| // |
| // Returns: STATUS_SUCCESS - success |
| // STATUS_FAILURE - failure |
| // |
| // Description: This function read DPRAM 4 words at a time |
| // |
| // Notes: |
| // |
| //--------------------------------------------------------------------------- |
| int fix_ft1000_read_dpram32(struct ft1000_device *ft1000dev, u16 indx, |
| u8 *buffer) |
| { |
| u8 buf[16]; |
| u16 pos; |
| int ret = STATUS_SUCCESS; |
| |
| pos = (indx / 4) * 4; |
| ret = ft1000_read_dpram32(ft1000dev, pos, buf, 16); |
| |
| if (ret == STATUS_SUCCESS) { |
| pos = (indx % 4) * 4; |
| *buffer++ = buf[pos++]; |
| *buffer++ = buf[pos++]; |
| *buffer++ = buf[pos++]; |
| *buffer++ = buf[pos++]; |
| } else { |
| DEBUG("fix_ft1000_read_dpram32: DPRAM32 Read failed\n"); |
| *buffer++ = 0; |
| *buffer++ = 0; |
| *buffer++ = 0; |
| *buffer++ = 0; |
| } |
| |
| return ret; |
| } |
| |
| |
| //--------------------------------------------------------------------------- |
| // Function: fix_ft1000_write_dpram32 |
| // |
| // Parameters: ft1000_device - device structure |
| // indx - starting address to write |
| // buffer - data buffer to write |
| // |
| // |
| // Returns: STATUS_SUCCESS - success |
| // STATUS_FAILURE - failure |
| // |
| // Description: This function write to DPRAM 4 words at a time |
| // |
| // Notes: |
| // |
| //--------------------------------------------------------------------------- |
| int fix_ft1000_write_dpram32(struct ft1000_device *ft1000dev, u16 indx, u8 *buffer) |
| { |
| u16 pos1; |
| u16 pos2; |
| u16 i; |
| u8 buf[32]; |
| u8 resultbuffer[32]; |
| u8 *pdata; |
| int ret = STATUS_SUCCESS; |
| |
| pos1 = (indx / 4) * 4; |
| pdata = buffer; |
| ret = ft1000_read_dpram32(ft1000dev, pos1, buf, 16); |
| |
| if (ret == STATUS_SUCCESS) { |
| pos2 = (indx % 4)*4; |
| buf[pos2++] = *buffer++; |
| buf[pos2++] = *buffer++; |
| buf[pos2++] = *buffer++; |
| buf[pos2++] = *buffer++; |
| ret = ft1000_write_dpram32(ft1000dev, pos1, buf, 16); |
| } else { |
| DEBUG("fix_ft1000_write_dpram32: DPRAM32 Read failed\n"); |
| return ret; |
| } |
| |
| ret = ft1000_read_dpram32(ft1000dev, pos1, (u8 *)&resultbuffer[0], 16); |
| |
| if (ret == STATUS_SUCCESS) { |
| buffer = pdata; |
| for (i = 0; i < 16; i++) { |
| if (buf[i] != resultbuffer[i]) |
| ret = STATUS_FAILURE; |
| } |
| } |
| |
| if (ret == STATUS_FAILURE) { |
| ret = ft1000_write_dpram32(ft1000dev, pos1, |
| (u8 *)&tempbuffer[0], 16); |
| ret = ft1000_read_dpram32(ft1000dev, pos1, |
| (u8 *)&resultbuffer[0], 16); |
| if (ret == STATUS_SUCCESS) { |
| buffer = pdata; |
| for (i = 0; i < 16; i++) { |
| if (tempbuffer[i] != resultbuffer[i]) { |
| ret = STATUS_FAILURE; |
| DEBUG("%s Failed to write\n", |
| __func__); |
| } |
| } |
| } |
| } |
| |
| return ret; |
| } |
| |
| |
| //------------------------------------------------------------------------ |
| // |
| // Function: card_reset_dsp |
| // |
| // Synopsis: This function is called to reset or activate the DSP |
| // |
| // Arguments: value - reset or activate |
| // |
| // Returns: None |
| //----------------------------------------------------------------------- |
| static void card_reset_dsp(struct ft1000_device *ft1000dev, bool value) |
| { |
| u16 status = STATUS_SUCCESS; |
| u16 tempword; |
| |
| status = ft1000_write_register(ft1000dev, HOST_INTF_BE, |
| FT1000_REG_SUP_CTRL); |
| status = ft1000_read_register(ft1000dev, &tempword, |
| FT1000_REG_SUP_CTRL); |
| |
| if (value) { |
| DEBUG("Reset DSP\n"); |
| status = ft1000_read_register(ft1000dev, &tempword, |
| FT1000_REG_RESET); |
| tempword |= DSP_RESET_BIT; |
| status = ft1000_write_register(ft1000dev, tempword, |
| FT1000_REG_RESET); |
| } else { |
| DEBUG("Activate DSP\n"); |
| status = ft1000_read_register(ft1000dev, &tempword, |
| FT1000_REG_RESET); |
| tempword |= DSP_ENCRYPTED; |
| tempword &= ~DSP_UNENCRYPTED; |
| status = ft1000_write_register(ft1000dev, tempword, |
| FT1000_REG_RESET); |
| status = ft1000_read_register(ft1000dev, &tempword, |
| FT1000_REG_RESET); |
| tempword &= ~EFUSE_MEM_DISABLE; |
| tempword &= ~DSP_RESET_BIT; |
| status = ft1000_write_register(ft1000dev, tempword, |
| FT1000_REG_RESET); |
| status = ft1000_read_register(ft1000dev, &tempword, |
| FT1000_REG_RESET); |
| } |
| } |
| |
| //--------------------------------------------------------------------------- |
| // Function: card_send_command |
| // |
| // Parameters: ft1000_device - device structure |
| // ptempbuffer - command buffer |
| // size - command buffer size |
| // |
| // Returns: STATUS_SUCCESS - success |
| // STATUS_FAILURE - failure |
| // |
| // Description: This function sends a command to ASIC |
| // |
| // Notes: |
| // |
| //--------------------------------------------------------------------------- |
| void card_send_command(struct ft1000_device *ft1000dev, void *ptempbuffer, |
| int size) |
| { |
| unsigned short temp; |
| unsigned char *commandbuf; |
| |
| DEBUG("card_send_command: enter card_send_command... size=%d\n", size); |
| |
| commandbuf = kmalloc(size + 2, GFP_KERNEL); |
| memcpy((void *)commandbuf + 2, (void *)ptempbuffer, size); |
| |
| ft1000_read_register(ft1000dev, &temp, FT1000_REG_DOORBELL); |
| |
| if (temp & 0x0100) |
| msleep(10); |
| |
| /* check for odd word */ |
| size = size + 2; |
| |
| /* Must force to be 32 bit aligned */ |
| if (size % 4) |
| size += 4 - (size % 4); |
| |
| ft1000_write_dpram32(ft1000dev, 0, commandbuf, size); |
| msleep(1); |
| ft1000_write_register(ft1000dev, FT1000_DB_DPRAM_TX, |
| FT1000_REG_DOORBELL); |
| msleep(1); |
| |
| ft1000_read_register(ft1000dev, &temp, FT1000_REG_DOORBELL); |
| |
| if ((temp & 0x0100) == 0) { |
| //DEBUG("card_send_command: Message sent\n"); |
| } |
| |
| } |
| |
| //-------------------------------------------------------------------------- |
| // |
| // Function: dsp_reload |
| // |
| // Synopsis: This function is called to load or reload the DSP |
| // |
| // Arguments: ft1000dev - device structure |
| // |
| // Returns: None |
| //----------------------------------------------------------------------- |
| int dsp_reload(struct ft1000_device *ft1000dev) |
| { |
| u16 status; |
| u16 tempword; |
| u32 templong; |
| |
| struct ft1000_info *pft1000info; |
| |
| pft1000info = netdev_priv(ft1000dev->net); |
| |
| pft1000info->CardReady = 0; |
| |
| /* Program Interrupt Mask register */ |
| status = ft1000_write_register(ft1000dev, 0xffff, FT1000_REG_SUP_IMASK); |
| |
| status = ft1000_read_register(ft1000dev, &tempword, FT1000_REG_RESET); |
| tempword |= ASIC_RESET_BIT; |
| status = ft1000_write_register(ft1000dev, tempword, FT1000_REG_RESET); |
| msleep(1000); |
| status = ft1000_read_register(ft1000dev, &tempword, FT1000_REG_RESET); |
| DEBUG("Reset Register = 0x%x\n", tempword); |
| |
| /* Toggle DSP reset */ |
| card_reset_dsp(ft1000dev, 1); |
| msleep(1000); |
| card_reset_dsp(ft1000dev, 0); |
| msleep(1000); |
| |
| status = |
| ft1000_write_register(ft1000dev, HOST_INTF_BE, FT1000_REG_SUP_CTRL); |
| |
| /* Let's check for FEFE */ |
| status = |
| ft1000_read_dpram32(ft1000dev, FT1000_MAG_DPRAM_FEFE_INDX, |
| (u8 *) &templong, 4); |
| DEBUG("templong (fefe) = 0x%8x\n", templong); |
| |
| /* call codeloader */ |
| status = scram_dnldr(ft1000dev, pFileStart, FileLength); |
| |
| if (status != STATUS_SUCCESS) |
| return -EIO; |
| |
| msleep(1000); |
| |
| DEBUG("dsp_reload returned\n"); |
| |
| return 0; |
| } |
| |
| //--------------------------------------------------------------------------- |
| // |
| // Function: ft1000_reset_asic |
| // Description: This function will call the Card Service function to reset the |
| // ASIC. |
| // Input: |
| // dev - device structure |
| // Output: |
| // none |
| // |
| //--------------------------------------------------------------------------- |
| static void ft1000_reset_asic(struct net_device *dev) |
| { |
| struct ft1000_info *info = netdev_priv(dev); |
| struct ft1000_device *ft1000dev = info->pFt1000Dev; |
| u16 tempword; |
| |
| DEBUG("ft1000_hw:ft1000_reset_asic called\n"); |
| |
| /* Let's use the register provided by the Magnemite ASIC to reset the |
| * ASIC and DSP. |
| */ |
| ft1000_write_register(ft1000dev, (DSP_RESET_BIT | ASIC_RESET_BIT), |
| FT1000_REG_RESET); |
| |
| mdelay(1); |
| |
| /* set watermark to -1 in order to not generate an interrrupt */ |
| ft1000_write_register(ft1000dev, 0xffff, FT1000_REG_MAG_WATERMARK); |
| |
| /* clear interrupts */ |
| ft1000_read_register(ft1000dev, &tempword, FT1000_REG_SUP_ISR); |
| DEBUG("ft1000_hw: interrupt status register = 0x%x\n", tempword); |
| ft1000_write_register(ft1000dev, tempword, FT1000_REG_SUP_ISR); |
| ft1000_read_register(ft1000dev, &tempword, FT1000_REG_SUP_ISR); |
| DEBUG("ft1000_hw: interrupt status register = 0x%x\n", tempword); |
| } |
| |
| |
| //--------------------------------------------------------------------------- |
| // |
| // Function: ft1000_reset_card |
| // Description: This function will reset the card |
| // Input: |
| // dev - device structure |
| // Output: |
| // status - FALSE (card reset fail) |
| // TRUE (card reset successful) |
| // |
| //--------------------------------------------------------------------------- |
| static int ft1000_reset_card(struct net_device *dev) |
| { |
| struct ft1000_info *info = netdev_priv(dev); |
| struct ft1000_device *ft1000dev = info->pFt1000Dev; |
| u16 tempword; |
| struct prov_record *ptr; |
| |
| DEBUG("ft1000_hw:ft1000_reset_card called.....\n"); |
| |
| info->fCondResetPend = 1; |
| info->CardReady = 0; |
| info->fProvComplete = 0; |
| |
| /* Make sure we free any memory reserve for provisioning */ |
| while (list_empty(&info->prov_list) == 0) { |
| DEBUG("ft1000_reset_card:deleting provisioning record\n"); |
| ptr = |
| list_entry(info->prov_list.next, struct prov_record, list); |
| list_del(&ptr->list); |
| kfree(ptr->pprov_data); |
| kfree(ptr); |
| } |
| |
| DEBUG("ft1000_hw:ft1000_reset_card: reset asic\n"); |
| ft1000_reset_asic(dev); |
| |
| DEBUG("ft1000_hw:ft1000_reset_card: call dsp_reload\n"); |
| dsp_reload(ft1000dev); |
| |
| DEBUG("dsp reload successful\n"); |
| |
| mdelay(10); |
| |
| /* Initialize DSP heartbeat area */ |
| ft1000_write_dpram16(ft1000dev, FT1000_MAG_HI_HO, ho_mag, |
| FT1000_MAG_HI_HO_INDX); |
| ft1000_read_dpram16(ft1000dev, FT1000_MAG_HI_HO, (u8 *) &tempword, |
| FT1000_MAG_HI_HO_INDX); |
| DEBUG("ft1000_hw:ft1000_reset_card:hi_ho value = 0x%x\n", tempword); |
| |
| info->CardReady = 1; |
| |
| info->fCondResetPend = 0; |
| |
| return TRUE; |
| } |
| |
| static const struct net_device_ops ftnet_ops = |
| { |
| .ndo_open = &ft1000_open, |
| .ndo_stop = &ft1000_close, |
| .ndo_start_xmit = &ft1000_start_xmit, |
| .ndo_get_stats = &ft1000_netdev_stats, |
| }; |
| |
| |
| //--------------------------------------------------------------------------- |
| // Function: init_ft1000_netdev |
| // |
| // Parameters: ft1000dev - device structure |
| // |
| // |
| // Returns: STATUS_SUCCESS - success |
| // STATUS_FAILURE - failure |
| // |
| // Description: This function initialize the network device |
| // |
| // Notes: |
| // |
| //--------------------------------------------------------------------------- |
| int init_ft1000_netdev(struct ft1000_device *ft1000dev) |
| { |
| struct net_device *netdev; |
| struct ft1000_info *pInfo = NULL; |
| struct dpram_blk *pdpram_blk; |
| int i, ret_val; |
| struct list_head *cur, *tmp; |
| char card_nr[2]; |
| unsigned long gCardIndex = 0; |
| |
| DEBUG("Enter init_ft1000_netdev...\n"); |
| |
| netdev = alloc_etherdev(sizeof(struct ft1000_info)); |
| if (!netdev) { |
| DEBUG("init_ft1000_netdev: can not allocate network device\n"); |
| return -ENOMEM; |
| } |
| |
| pInfo = netdev_priv(netdev); |
| |
| memset(pInfo, 0, sizeof(struct ft1000_info)); |
| |
| dev_alloc_name(netdev, netdev->name); |
| |
| DEBUG("init_ft1000_netdev: network device name is %s\n", netdev->name); |
| |
| if (strncmp(netdev->name, "eth", 3) == 0) { |
| card_nr[0] = netdev->name[3]; |
| card_nr[1] = '\0'; |
| ret_val = strict_strtoul(card_nr, 10, &gCardIndex); |
| if (ret_val) { |
| printk(KERN_ERR "Can't parse netdev\n"); |
| goto err_net; |
| } |
| |
| pInfo->CardNumber = gCardIndex; |
| DEBUG("card number = %d\n", pInfo->CardNumber); |
| } else { |
| printk(KERN_ERR "ft1000: Invalid device name\n"); |
| ret_val = -ENXIO; |
| goto err_net; |
| } |
| |
| memset(&pInfo->stats, 0, sizeof(struct net_device_stats)); |
| |
| spin_lock_init(&pInfo->dpram_lock); |
| pInfo->pFt1000Dev = ft1000dev; |
| pInfo->DrvErrNum = 0; |
| pInfo->registered = 1; |
| pInfo->ft1000_reset = ft1000_reset; |
| pInfo->mediastate = 0; |
| pInfo->fifo_cnt = 0; |
| pInfo->DeviceCreated = FALSE; |
| pInfo->CardReady = 0; |
| pInfo->DSP_TIME[0] = 0; |
| pInfo->DSP_TIME[1] = 0; |
| pInfo->DSP_TIME[2] = 0; |
| pInfo->DSP_TIME[3] = 0; |
| pInfo->fAppMsgPend = 0; |
| pInfo->fCondResetPend = 0; |
| pInfo->usbboot = 0; |
| pInfo->dspalive = 0; |
| memset(&pInfo->tempbuf[0], 0, sizeof(pInfo->tempbuf)); |
| |
| INIT_LIST_HEAD(&pInfo->prov_list); |
| |
| INIT_LIST_HEAD(&pInfo->nodes.list); |
| |
| netdev->netdev_ops = &ftnet_ops; |
| |
| ft1000dev->net = netdev; |
| |
| DEBUG("Initialize free_buff_lock and freercvpool\n"); |
| spin_lock_init(&free_buff_lock); |
| |
| /* initialize a list of buffers to be use for queuing |
| * up receive command data |
| */ |
| INIT_LIST_HEAD(&freercvpool); |
| |
| /* create list of free buffers */ |
| for (i = 0; i < NUM_OF_FREE_BUFFERS; i++) { |
| /* Get memory for DPRAM_DATA link list */ |
| pdpram_blk = kmalloc(sizeof(struct dpram_blk), GFP_KERNEL); |
| if (pdpram_blk == NULL) { |
| ret_val = -ENOMEM; |
| goto err_free; |
| } |
| /* Get a block of memory to store command data */ |
| pdpram_blk->pbuffer = kmalloc(MAX_CMD_SQSIZE, GFP_KERNEL); |
| if (pdpram_blk->pbuffer == NULL) { |
| ret_val = -ENOMEM; |
| kfree(pdpram_blk); |
| goto err_free; |
| } |
| /* link provisioning data */ |
| list_add_tail(&pdpram_blk->list, &freercvpool); |
| } |
| numofmsgbuf = NUM_OF_FREE_BUFFERS; |
| |
| return 0; |
| |
| err_free: |
| list_for_each_safe(cur, tmp, &freercvpool) { |
| pdpram_blk = list_entry(cur, struct dpram_blk, list); |
| list_del(&pdpram_blk->list); |
| kfree(pdpram_blk->pbuffer); |
| kfree(pdpram_blk); |
| } |
| err_net: |
| free_netdev(netdev); |
| return ret_val; |
| } |
| |
| //--------------------------------------------------------------------------- |
| // Function: reg_ft1000_netdev |
| // |
| // Parameters: ft1000dev - device structure |
| // |
| // |
| // Returns: STATUS_SUCCESS - success |
| // STATUS_FAILURE - failure |
| // |
| // Description: This function register the network driver |
| // |
| // Notes: |
| // |
| //--------------------------------------------------------------------------- |
| int reg_ft1000_netdev(struct ft1000_device *ft1000dev, |
| struct usb_interface *intf) |
| { |
| struct net_device *netdev; |
| struct ft1000_info *pInfo; |
| int rc; |
| |
| netdev = ft1000dev->net; |
| pInfo = netdev_priv(ft1000dev->net); |
| DEBUG("Enter reg_ft1000_netdev...\n"); |
| |
| ft1000_read_register(ft1000dev, &pInfo->AsicID, FT1000_REG_ASIC_ID); |
| |
| usb_set_intfdata(intf, pInfo); |
| SET_NETDEV_DEV(netdev, &intf->dev); |
| |
| rc = register_netdev(netdev); |
| if (rc) { |
| DEBUG("reg_ft1000_netdev: could not register network device\n"); |
| free_netdev(netdev); |
| return rc; |
| } |
| |
| ft1000_create_dev(ft1000dev); |
| |
| DEBUG("reg_ft1000_netdev returned\n"); |
| |
| pInfo->CardReady = 1; |
| |
| return 0; |
| } |
| |
| static int ft1000_reset(struct net_device *dev) |
| { |
| ft1000_reset_card(dev); |
| return 0; |
| } |
| |
| //--------------------------------------------------------------------------- |
| // Function: ft1000_usb_transmit_complete |
| // |
| // Parameters: urb - transmitted usb urb |
| // |
| // |
| // Returns: none |
| // |
| // Description: This is the callback function when a urb is transmitted |
| // |
| // Notes: |
| // |
| //--------------------------------------------------------------------------- |
| static void ft1000_usb_transmit_complete(struct urb *urb) |
| { |
| |
| struct ft1000_device *ft1000dev = urb->context; |
| |
| if (urb->status) |
| pr_err("%s: TX status %d\n", ft1000dev->net->name, urb->status); |
| |
| netif_wake_queue(ft1000dev->net); |
| } |
| |
| //--------------------------------------------------------------------------- |
| // |
| // Function: ft1000_copy_down_pkt |
| // Description: This function will take an ethernet packet and convert it to |
| // a Flarion packet prior to sending it to the ASIC Downlink |
| // FIFO. |
| // Input: |
| // dev - device structure |
| // packet - address of ethernet packet |
| // len - length of IP packet |
| // Output: |
| // status - FAILURE |
| // SUCCESS |
| // |
| //--------------------------------------------------------------------------- |
| static int ft1000_copy_down_pkt(struct net_device *netdev, u8 * packet, u16 len) |
| { |
| struct ft1000_info *pInfo = netdev_priv(netdev); |
| struct ft1000_device *pFt1000Dev = pInfo->pFt1000Dev; |
| |
| int count, ret; |
| u8 *t; |
| struct pseudo_hdr hdr; |
| |
| if (!pInfo->CardReady) { |
| DEBUG("ft1000_copy_down_pkt::Card Not Ready\n"); |
| return -ENODEV; |
| } |
| |
| count = sizeof(struct pseudo_hdr) + len; |
| if (count > MAX_BUF_SIZE) { |
| DEBUG("Error:ft1000_copy_down_pkt:Message Size Overflow!\n"); |
| DEBUG("size = %d\n", count); |
| return -EINVAL; |
| } |
| |
| if (count % 4) |
| count = count + (4 - (count % 4)); |
| |
| memset(&hdr, 0, sizeof(struct pseudo_hdr)); |
| |
| hdr.length = ntohs(count); |
| hdr.source = 0x10; |
| hdr.destination = 0x20; |
| hdr.portdest = 0x20; |
| hdr.portsrc = 0x10; |
| hdr.sh_str_id = 0x91; |
| hdr.control = 0x00; |
| |
| hdr.checksum = hdr.length ^ hdr.source ^ hdr.destination ^ |
| hdr.portdest ^ hdr.portsrc ^ hdr.sh_str_id ^ hdr.control; |
| |
| memcpy(&pFt1000Dev->tx_buf[0], &hdr, sizeof(hdr)); |
| memcpy(&(pFt1000Dev->tx_buf[sizeof(struct pseudo_hdr)]), packet, len); |
| |
| netif_stop_queue(netdev); |
| |
| usb_fill_bulk_urb(pFt1000Dev->tx_urb, |
| pFt1000Dev->dev, |
| usb_sndbulkpipe(pFt1000Dev->dev, |
| pFt1000Dev->bulk_out_endpointAddr), |
| pFt1000Dev->tx_buf, count, |
| ft1000_usb_transmit_complete, (void *)pFt1000Dev); |
| |
| t = (u8 *) pFt1000Dev->tx_urb->transfer_buffer; |
| |
| ret = usb_submit_urb(pFt1000Dev->tx_urb, GFP_ATOMIC); |
| |
| if (ret) { |
| DEBUG("ft1000 failed tx_urb %d\n", ret); |
| return ret; |
| } else { |
| pInfo->stats.tx_packets++; |
| pInfo->stats.tx_bytes += (len + 14); |
| } |
| |
| return 0; |
| } |
| |
| |
| //--------------------------------------------------------------------------- |
| // Function: ft1000_start_xmit |
| // |
| // Parameters: skb - socket buffer to be sent |
| // dev - network device |
| // |
| // |
| // Returns: none |
| // |
| // Description: transmit a ethernet packet |
| // |
| // Notes: |
| // |
| //--------------------------------------------------------------------------- |
| static int ft1000_start_xmit(struct sk_buff *skb, struct net_device *dev) |
| { |
| struct ft1000_info *pInfo = netdev_priv(dev); |
| struct ft1000_device *pFt1000Dev = pInfo->pFt1000Dev; |
| u8 *pdata; |
| int maxlen, pipe; |
| |
| if (skb == NULL) { |
| DEBUG("ft1000_hw: ft1000_start_xmit:skb == NULL!!!\n"); |
| return NETDEV_TX_OK; |
| } |
| |
| if (pFt1000Dev->status & FT1000_STATUS_CLOSING) { |
| DEBUG("network driver is closed, return\n"); |
| goto err; |
| } |
| |
| pipe = |
| usb_sndbulkpipe(pFt1000Dev->dev, pFt1000Dev->bulk_out_endpointAddr); |
| maxlen = usb_maxpacket(pFt1000Dev->dev, pipe, usb_pipeout(pipe)); |
| |
| pdata = (u8 *) skb->data; |
| |
| if (pInfo->mediastate == 0) { |
| /* Drop packet is mediastate is down */ |
| DEBUG("ft1000_hw:ft1000_start_xmit:mediastate is down\n"); |
| goto err; |
| } |
| |
| if ((skb->len < ENET_HEADER_SIZE) || (skb->len > ENET_MAX_SIZE)) { |
| /* Drop packet which has invalid size */ |
| DEBUG("ft1000_hw:ft1000_start_xmit:invalid ethernet length\n"); |
| goto err; |
| } |
| |
| ft1000_copy_down_pkt(dev, (pdata + ENET_HEADER_SIZE - 2), |
| skb->len - ENET_HEADER_SIZE + 2); |
| |
| err: |
| dev_kfree_skb(skb); |
| |
| return NETDEV_TX_OK; |
| } |
| |
| |
| //--------------------------------------------------------------------------- |
| // |
| // Function: ft1000_copy_up_pkt |
| // Description: This function will take a packet from the FIFO up link and |
| // convert it into an ethernet packet and deliver it to the IP stack |
| // Input: |
| // urb - the receiving usb urb |
| // |
| // Output: |
| // status - FAILURE |
| // SUCCESS |
| // |
| //--------------------------------------------------------------------------- |
| static int ft1000_copy_up_pkt(struct urb *urb) |
| { |
| struct ft1000_info *info = urb->context; |
| struct ft1000_device *ft1000dev = info->pFt1000Dev; |
| struct net_device *net = ft1000dev->net; |
| |
| u16 tempword; |
| u16 len; |
| u16 lena; |
| struct sk_buff *skb; |
| u16 i; |
| u8 *pbuffer = NULL; |
| u8 *ptemp = NULL; |
| u16 *chksum; |
| |
| if (ft1000dev->status & FT1000_STATUS_CLOSING) { |
| DEBUG("network driver is closed, return\n"); |
| return STATUS_SUCCESS; |
| } |
| // Read length |
| len = urb->transfer_buffer_length; |
| lena = urb->actual_length; |
| |
| chksum = (u16 *) ft1000dev->rx_buf; |
| |
| tempword = *chksum++; |
| for (i = 1; i < 7; i++) |
| tempword ^= *chksum++; |
| |
| if (tempword != *chksum) { |
| info->stats.rx_errors++; |
| ft1000_submit_rx_urb(info); |
| return STATUS_FAILURE; |
| } |
| |
| skb = dev_alloc_skb(len + 12 + 2); |
| |
| if (skb == NULL) { |
| DEBUG("ft1000_copy_up_pkt: No Network buffers available\n"); |
| info->stats.rx_errors++; |
| ft1000_submit_rx_urb(info); |
| return STATUS_FAILURE; |
| } |
| |
| pbuffer = (u8 *) skb_put(skb, len + 12); |
| |
| /* subtract the number of bytes read already */ |
| ptemp = pbuffer; |
| |
| /* fake MAC address */ |
| *pbuffer++ = net->dev_addr[0]; |
| *pbuffer++ = net->dev_addr[1]; |
| *pbuffer++ = net->dev_addr[2]; |
| *pbuffer++ = net->dev_addr[3]; |
| *pbuffer++ = net->dev_addr[4]; |
| *pbuffer++ = net->dev_addr[5]; |
| *pbuffer++ = 0x00; |
| *pbuffer++ = 0x07; |
| *pbuffer++ = 0x35; |
| *pbuffer++ = 0xff; |
| *pbuffer++ = 0xff; |
| *pbuffer++ = 0xfe; |
| |
| memcpy(pbuffer, ft1000dev->rx_buf + sizeof(struct pseudo_hdr), |
| len - sizeof(struct pseudo_hdr)); |
| |
| skb->dev = net; |
| |
| skb->protocol = eth_type_trans(skb, net); |
| skb->ip_summed = CHECKSUM_UNNECESSARY; |
| netif_rx(skb); |
| |
| info->stats.rx_packets++; |
| /* Add on 12 bytes for MAC address which was removed */ |
| info->stats.rx_bytes += (lena + 12); |
| |
| ft1000_submit_rx_urb(info); |
| |
| return SUCCESS; |
| } |
| |
| |
| //--------------------------------------------------------------------------- |
| // |
| // Function: ft1000_submit_rx_urb |
| // Description: the receiving function of the network driver |
| // |
| // Input: |
| // info - a private structure contains the device information |
| // |
| // Output: |
| // status - FAILURE |
| // SUCCESS |
| // |
| //--------------------------------------------------------------------------- |
| static int ft1000_submit_rx_urb(struct ft1000_info *info) |
| { |
| int result; |
| struct ft1000_device *pFt1000Dev = info->pFt1000Dev; |
| |
| if (pFt1000Dev->status & FT1000_STATUS_CLOSING) { |
| DEBUG("network driver is closed, return\n"); |
| return -ENODEV; |
| } |
| |
| usb_fill_bulk_urb(pFt1000Dev->rx_urb, |
| pFt1000Dev->dev, |
| usb_rcvbulkpipe(pFt1000Dev->dev, |
| pFt1000Dev->bulk_in_endpointAddr), |
| pFt1000Dev->rx_buf, MAX_BUF_SIZE, |
| (usb_complete_t) ft1000_copy_up_pkt, info); |
| |
| result = usb_submit_urb(pFt1000Dev->rx_urb, GFP_ATOMIC); |
| |
| if (result) { |
| pr_err("ft1000_submit_rx_urb: submitting rx_urb %d failed\n", |
| result); |
| return result; |
| } |
| |
| return 0; |
| } |
| |
| |
| //--------------------------------------------------------------------------- |
| // Function: ft1000_open |
| // |
| // Parameters: |
| // dev - network device |
| // |
| // |
| // Returns: none |
| // |
| // Description: open the network driver |
| // |
| // Notes: |
| // |
| //--------------------------------------------------------------------------- |
| static int ft1000_open(struct net_device *dev) |
| { |
| struct ft1000_info *pInfo = netdev_priv(dev); |
| struct timeval tv; |
| int ret; |
| |
| DEBUG("ft1000_open is called for card %d\n", pInfo->CardNumber); |
| |
| pInfo->stats.rx_bytes = 0; |
| pInfo->stats.tx_bytes = 0; |
| pInfo->stats.rx_packets = 0; |
| pInfo->stats.tx_packets = 0; |
| do_gettimeofday(&tv); |
| pInfo->ConTm = tv.tv_sec; |
| pInfo->ProgConStat = 0; |
| |
| netif_start_queue(dev); |
| |
| netif_carrier_on(dev); |
| |
| ret = ft1000_submit_rx_urb(pInfo); |
| |
| return ret; |
| } |
| |
| //--------------------------------------------------------------------------- |
| // Function: ft1000_close |
| // |
| // Parameters: |
| // net - network device |
| // |
| // |
| // Returns: none |
| // |
| // Description: close the network driver |
| // |
| // Notes: |
| // |
| //--------------------------------------------------------------------------- |
| int ft1000_close(struct net_device *net) |
| { |
| struct ft1000_info *pInfo = netdev_priv(net); |
| struct ft1000_device *ft1000dev = pInfo->pFt1000Dev; |
| |
| ft1000dev->status |= FT1000_STATUS_CLOSING; |
| |
| DEBUG("ft1000_close: pInfo=%p, ft1000dev=%p\n", pInfo, ft1000dev); |
| netif_carrier_off(net); |
| netif_stop_queue(net); |
| ft1000dev->status &= ~FT1000_STATUS_CLOSING; |
| |
| pInfo->ProgConStat = 0xff; |
| |
| return 0; |
| } |
| |
| static struct net_device_stats *ft1000_netdev_stats(struct net_device *dev) |
| { |
| struct ft1000_info *info = netdev_priv(dev); |
| |
| return &(info->stats); |
| } |
| |
| |
| //--------------------------------------------------------------------------- |
| // |
| // Function: ft1000_chkcard |
| // Description: This function will check if the device is presently available on |
| // the system. |
| // Input: |
| // dev - device structure |
| // Output: |
| // status - FALSE (device is not present) |
| // TRUE (device is present) |
| // |
| //--------------------------------------------------------------------------- |
| static int ft1000_chkcard(struct ft1000_device *dev) |
| { |
| u16 tempword; |
| u16 status; |
| struct ft1000_info *info = netdev_priv(dev->net); |
| |
| if (info->fCondResetPend) { |
| DEBUG |
| ("ft1000_hw:ft1000_chkcard:Card is being reset, return FALSE\n"); |
| return TRUE; |
| } |
| /* Mask register is used to check for device presence since it is never |
| * set to zero. |
| */ |
| status = ft1000_read_register(dev, &tempword, FT1000_REG_SUP_IMASK); |
| if (tempword == 0) { |
| DEBUG |
| ("ft1000_hw:ft1000_chkcard: IMASK = 0 Card not detected\n"); |
| return FALSE; |
| } |
| /* The system will return the value of 0xffff for the version register |
| * if the device is not present. |
| */ |
| status = ft1000_read_register(dev, &tempword, FT1000_REG_ASIC_ID); |
| if (tempword != 0x1b01) { |
| dev->status |= FT1000_STATUS_CLOSING; |
| DEBUG |
| ("ft1000_hw:ft1000_chkcard: Version = 0xffff Card not detected\n"); |
| return FALSE; |
| } |
| return TRUE; |
| } |
| |
| //--------------------------------------------------------------------------- |
| // |
| // Function: ft1000_receive_cmd |
| // Description: This function will read a message from the dpram area. |
| // Input: |
| // dev - network device structure |
| // pbuffer - caller supply address to buffer |
| // pnxtph - pointer to next pseudo header |
| // Output: |
| // Status = 0 (unsuccessful) |
| // = 1 (successful) |
| // |
| //--------------------------------------------------------------------------- |
| static bool ft1000_receive_cmd(struct ft1000_device *dev, u16 *pbuffer, |
| int maxsz, u16 *pnxtph) |
| { |
| u16 size, ret; |
| u16 *ppseudohdr; |
| int i; |
| u16 tempword; |
| |
| ret = |
| ft1000_read_dpram16(dev, FT1000_MAG_PH_LEN, (u8 *) &size, |
| FT1000_MAG_PH_LEN_INDX); |
| size = ntohs(size) + PSEUDOSZ; |
| if (size > maxsz) { |
| DEBUG("FT1000:ft1000_receive_cmd:Invalid command length = %d\n", |
| size); |
| return FALSE; |
| } else { |
| ppseudohdr = (u16 *) pbuffer; |
| ft1000_write_register(dev, FT1000_DPRAM_MAG_RX_BASE, |
| FT1000_REG_DPRAM_ADDR); |
| ret = |
| ft1000_read_register(dev, pbuffer, FT1000_REG_MAG_DPDATAH); |
| pbuffer++; |
| ft1000_write_register(dev, FT1000_DPRAM_MAG_RX_BASE + 1, |
| FT1000_REG_DPRAM_ADDR); |
| for (i = 0; i <= (size >> 2); i++) { |
| ret = |
| ft1000_read_register(dev, pbuffer, |
| FT1000_REG_MAG_DPDATAL); |
| pbuffer++; |
| ret = |
| ft1000_read_register(dev, pbuffer, |
| FT1000_REG_MAG_DPDATAH); |
| pbuffer++; |
| } |
| /* copy odd aligned word */ |
| ret = |
| ft1000_read_register(dev, pbuffer, FT1000_REG_MAG_DPDATAL); |
| |
| pbuffer++; |
| ret = |
| ft1000_read_register(dev, pbuffer, FT1000_REG_MAG_DPDATAH); |
| |
| pbuffer++; |
| if (size & 0x0001) { |
| /* copy odd byte from fifo */ |
| ret = |
| ft1000_read_register(dev, &tempword, |
| FT1000_REG_DPRAM_DATA); |
| *pbuffer = ntohs(tempword); |
| } |
| /* Check if pseudo header checksum is good |
| * Calculate pseudo header checksum |
| */ |
| tempword = *ppseudohdr++; |
| for (i = 1; i < 7; i++) |
| tempword ^= *ppseudohdr++; |
| |
| if ((tempword != *ppseudohdr)) |
| return FALSE; |
| |
| return TRUE; |
| } |
| } |
| |
| static int ft1000_dsp_prov(void *arg) |
| { |
| struct ft1000_device *dev = (struct ft1000_device *)arg; |
| struct ft1000_info *info = netdev_priv(dev->net); |
| u16 tempword; |
| u16 len; |
| u16 i = 0; |
| struct prov_record *ptr; |
| struct pseudo_hdr *ppseudo_hdr; |
| u16 *pmsg; |
| u16 status; |
| u16 TempShortBuf[256]; |
| |
| DEBUG("*** DspProv Entered\n"); |
| |
| while (list_empty(&info->prov_list) == 0) { |
| DEBUG("DSP Provisioning List Entry\n"); |
| |
| /* Check if doorbell is available */ |
| DEBUG("check if doorbell is cleared\n"); |
| status = |
| ft1000_read_register(dev, &tempword, FT1000_REG_DOORBELL); |
| if (status) { |
| DEBUG("ft1000_dsp_prov::ft1000_read_register error\n"); |
| break; |
| } |
| |
| while (tempword & FT1000_DB_DPRAM_TX) { |
| mdelay(10); |
| i++; |
| if (i == 10) { |
| DEBUG("FT1000:ft1000_dsp_prov:message drop\n"); |
| return STATUS_FAILURE; |
| } |
| ft1000_read_register(dev, &tempword, |
| FT1000_REG_DOORBELL); |
| } |
| |
| if (!(tempword & FT1000_DB_DPRAM_TX)) { |
| DEBUG("*** Provision Data Sent to DSP\n"); |
| |
| /* Send provisioning data */ |
| ptr = |
| list_entry(info->prov_list.next, struct prov_record, |
| list); |
| len = *(u16 *) ptr->pprov_data; |
| len = htons(len); |
| len += PSEUDOSZ; |
| |
| pmsg = (u16 *) ptr->pprov_data; |
| ppseudo_hdr = (struct pseudo_hdr *)pmsg; |
| /* Insert slow queue sequence number */ |
| ppseudo_hdr->seq_num = info->squeseqnum++; |
| ppseudo_hdr->portsrc = 0; |
| /* Calculate new checksum */ |
| ppseudo_hdr->checksum = *pmsg++; |
| for (i = 1; i < 7; i++) { |
| ppseudo_hdr->checksum ^= *pmsg++; |
| } |
| |
| TempShortBuf[0] = 0; |
| TempShortBuf[1] = htons(len); |
| memcpy(&TempShortBuf[2], ppseudo_hdr, len); |
| |
| status = |
| ft1000_write_dpram32(dev, 0, |
| (u8 *) &TempShortBuf[0], |
| (unsigned short)(len + 2)); |
| status = |
| ft1000_write_register(dev, FT1000_DB_DPRAM_TX, |
| FT1000_REG_DOORBELL); |
| |
| list_del(&ptr->list); |
| kfree(ptr->pprov_data); |
| kfree(ptr); |
| } |
| msleep(10); |
| } |
| |
| DEBUG("DSP Provisioning List Entry finished\n"); |
| |
| msleep(100); |
| |
| info->fProvComplete = 1; |
| info->CardReady = 1; |
| |
| return STATUS_SUCCESS; |
| } |
| |
| static int ft1000_proc_drvmsg(struct ft1000_device *dev, u16 size) |
| { |
| struct ft1000_info *info = netdev_priv(dev->net); |
| u16 msgtype; |
| u16 tempword; |
| struct media_msg *pmediamsg; |
| struct dsp_init_msg *pdspinitmsg; |
| struct drv_msg *pdrvmsg; |
| u16 i; |
| struct pseudo_hdr *ppseudo_hdr; |
| u16 *pmsg; |
| u16 status; |
| union { |
| u8 byte[2]; |
| u16 wrd; |
| } convert; |
| |
| char *cmdbuffer = kmalloc(1600, GFP_KERNEL); |
| if (!cmdbuffer) |
| return STATUS_FAILURE; |
| |
| status = ft1000_read_dpram32(dev, 0x200, cmdbuffer, size); |
| |
| #ifdef JDEBUG |
| DEBUG("ft1000_proc_drvmsg:cmdbuffer\n"); |
| for (i = 0; i < size; i += 5) { |
| if ((i + 5) < size) |
| DEBUG("0x%x, 0x%x, 0x%x, 0x%x, 0x%x\n", cmdbuffer[i], |
| cmdbuffer[i + 1], cmdbuffer[i + 2], |
| cmdbuffer[i + 3], cmdbuffer[i + 4]); |
| else { |
| for (j = i; j < size; j++) |
| DEBUG("0x%x ", cmdbuffer[j]); |
| DEBUG("\n"); |
| break; |
| } |
| } |
| #endif |
| pdrvmsg = (struct drv_msg *)&cmdbuffer[2]; |
| msgtype = ntohs(pdrvmsg->type); |
| DEBUG("ft1000_proc_drvmsg:Command message type = 0x%x\n", msgtype); |
| switch (msgtype) { |
| case MEDIA_STATE:{ |
| DEBUG |
| ("ft1000_proc_drvmsg:Command message type = MEDIA_STATE"); |
| |
| pmediamsg = (struct media_msg *)&cmdbuffer[0]; |
| if (info->ProgConStat != 0xFF) { |
| if (pmediamsg->state) { |
| DEBUG("Media is up\n"); |
| if (info->mediastate == 0) { |
| if (info->NetDevRegDone) { |
| netif_wake_queue(dev-> |
| net); |
| } |
| info->mediastate = 1; |
| } |
| } else { |
| DEBUG("Media is down\n"); |
| if (info->mediastate == 1) { |
| info->mediastate = 0; |
| if (info->NetDevRegDone) { |
| } |
| info->ConTm = 0; |
| } |
| } |
| } else { |
| DEBUG("Media is down\n"); |
| if (info->mediastate == 1) { |
| info->mediastate = 0; |
| info->ConTm = 0; |
| } |
| } |
| break; |
| } |
| case DSP_INIT_MSG:{ |
| DEBUG |
| ("ft1000_proc_drvmsg:Command message type = DSP_INIT_MSG"); |
| |
| pdspinitmsg = (struct dsp_init_msg *)&cmdbuffer[2]; |
| memcpy(info->DspVer, pdspinitmsg->DspVer, DSPVERSZ); |
| DEBUG("DSPVER = 0x%2x 0x%2x 0x%2x 0x%2x\n", |
| info->DspVer[0], info->DspVer[1], info->DspVer[2], |
| info->DspVer[3]); |
| memcpy(info->HwSerNum, pdspinitmsg->HwSerNum, |
| HWSERNUMSZ); |
| memcpy(info->Sku, pdspinitmsg->Sku, SKUSZ); |
| memcpy(info->eui64, pdspinitmsg->eui64, EUISZ); |
| DEBUG("EUI64=%2x.%2x.%2x.%2x.%2x.%2x.%2x.%2x\n", |
| info->eui64[0], info->eui64[1], info->eui64[2], |
| info->eui64[3], info->eui64[4], info->eui64[5], |
| info->eui64[6], info->eui64[7]); |
| dev->net->dev_addr[0] = info->eui64[0]; |
| dev->net->dev_addr[1] = info->eui64[1]; |
| dev->net->dev_addr[2] = info->eui64[2]; |
| dev->net->dev_addr[3] = info->eui64[5]; |
| dev->net->dev_addr[4] = info->eui64[6]; |
| dev->net->dev_addr[5] = info->eui64[7]; |
| |
| if (ntohs(pdspinitmsg->length) == |
| (sizeof(struct dsp_init_msg) - 20)) { |
| memcpy(info->ProductMode, |
| pdspinitmsg->ProductMode, MODESZ); |
| memcpy(info->RfCalVer, pdspinitmsg->RfCalVer, |
| CALVERSZ); |
| memcpy(info->RfCalDate, pdspinitmsg->RfCalDate, |
| CALDATESZ); |
| DEBUG("RFCalVer = 0x%2x 0x%2x\n", |
| info->RfCalVer[0], info->RfCalVer[1]); |
| } |
| break; |
| } |
| case DSP_PROVISION:{ |
| DEBUG |
| ("ft1000_proc_drvmsg:Command message type = DSP_PROVISION\n"); |
| |
| /* kick off dspprov routine to start provisioning |
| * Send provisioning data to DSP |
| */ |
| if (list_empty(&info->prov_list) == 0) { |
| info->fProvComplete = 0; |
| status = ft1000_dsp_prov(dev); |
| if (status != STATUS_SUCCESS) |
| goto out; |
| } else { |
| info->fProvComplete = 1; |
| status = |
| ft1000_write_register(dev, FT1000_DB_HB, |
| FT1000_REG_DOORBELL); |
| DEBUG |
| ("FT1000:drivermsg:No more DSP provisioning data in dsp image\n"); |
| } |
| DEBUG("ft1000_proc_drvmsg:DSP PROVISION is done\n"); |
| break; |
| } |
| case DSP_STORE_INFO:{ |
| DEBUG |
| ("ft1000_proc_drvmsg:Command message type = DSP_STORE_INFO"); |
| |
| DEBUG("FT1000:drivermsg:Got DSP_STORE_INFO\n"); |
| tempword = ntohs(pdrvmsg->length); |
| info->DSPInfoBlklen = tempword; |
| if (tempword < (MAX_DSP_SESS_REC - 4)) { |
| pmsg = (u16 *) &pdrvmsg->data[0]; |
| for (i = 0; i < ((tempword + 1) / 2); i++) { |
| DEBUG |
| ("FT1000:drivermsg:dsp info data = 0x%x\n", |
| *pmsg); |
| info->DSPInfoBlk[i + 10] = *pmsg++; |
| } |
| } else { |
| info->DSPInfoBlklen = 0; |
| } |
| break; |
| } |
| case DSP_GET_INFO:{ |
| DEBUG("FT1000:drivermsg:Got DSP_GET_INFO\n"); |
| /* copy dsp info block to dsp */ |
| info->DrvMsgPend = 1; |
| /* allow any outstanding ioctl to finish */ |
| mdelay(10); |
| status = |
| ft1000_read_register(dev, &tempword, |
| FT1000_REG_DOORBELL); |
| if (tempword & FT1000_DB_DPRAM_TX) { |
| mdelay(10); |
| status = |
| ft1000_read_register(dev, &tempword, |
| FT1000_REG_DOORBELL); |
| if (tempword & FT1000_DB_DPRAM_TX) { |
| mdelay(10); |
| status = |
| ft1000_read_register(dev, &tempword, |
| FT1000_REG_DOORBELL); |
| if (tempword & FT1000_DB_DPRAM_TX) |
| break; |
| } |
| } |
| /* Put message into Slow Queue |
| * Form Pseudo header |
| */ |
| pmsg = (u16 *) info->DSPInfoBlk; |
| *pmsg++ = 0; |
| *pmsg++ = |
| htons(info->DSPInfoBlklen + 20 + |
| info->DSPInfoBlklen); |
| ppseudo_hdr = |
| (struct pseudo_hdr *)(u16 *) &info->DSPInfoBlk[2]; |
| ppseudo_hdr->length = |
| htons(info->DSPInfoBlklen + 4 + |
| info->DSPInfoBlklen); |
| ppseudo_hdr->source = 0x10; |
| ppseudo_hdr->destination = 0x20; |
| ppseudo_hdr->portdest = 0; |
| ppseudo_hdr->portsrc = 0; |
| ppseudo_hdr->sh_str_id = 0; |
| ppseudo_hdr->control = 0; |
| ppseudo_hdr->rsvd1 = 0; |
| ppseudo_hdr->rsvd2 = 0; |
| ppseudo_hdr->qos_class = 0; |
| /* Insert slow queue sequence number */ |
| ppseudo_hdr->seq_num = info->squeseqnum++; |
| /* Insert application id */ |
| ppseudo_hdr->portsrc = 0; |
| /* Calculate new checksum */ |
| ppseudo_hdr->checksum = *pmsg++; |
| for (i = 1; i < 7; i++) |
| ppseudo_hdr->checksum ^= *pmsg++; |
| |
| info->DSPInfoBlk[10] = 0x7200; |
| info->DSPInfoBlk[11] = htons(info->DSPInfoBlklen); |
| status = |
| ft1000_write_dpram32(dev, 0, |
| (u8 *) &info->DSPInfoBlk[0], |
| (unsigned short)(info-> |
| DSPInfoBlklen |
| + 22)); |
| status = |
| ft1000_write_register(dev, FT1000_DB_DPRAM_TX, |
| FT1000_REG_DOORBELL); |
| info->DrvMsgPend = 0; |
| |
| break; |
| } |
| |
| case GET_DRV_ERR_RPT_MSG:{ |
| DEBUG("FT1000:drivermsg:Got GET_DRV_ERR_RPT_MSG\n"); |
| /* copy driver error message to dsp */ |
| info->DrvMsgPend = 1; |
| /* allow any outstanding ioctl to finish */ |
| mdelay(10); |
| status = |
| ft1000_read_register(dev, &tempword, |
| FT1000_REG_DOORBELL); |
| if (tempword & FT1000_DB_DPRAM_TX) { |
| mdelay(10); |
| status = |
| ft1000_read_register(dev, &tempword, |
| FT1000_REG_DOORBELL); |
| if (tempword & FT1000_DB_DPRAM_TX) |
| mdelay(10); |
| } |
| |
| if ((tempword & FT1000_DB_DPRAM_TX) == 0) { |
| /* Put message into Slow Queue |
| * Form Pseudo header |
| */ |
| pmsg = (u16 *) &tempbuffer[0]; |
| ppseudo_hdr = (struct pseudo_hdr *)pmsg; |
| ppseudo_hdr->length = htons(0x0012); |
| ppseudo_hdr->source = 0x10; |
| ppseudo_hdr->destination = 0x20; |
| ppseudo_hdr->portdest = 0; |
| ppseudo_hdr->portsrc = 0; |
| ppseudo_hdr->sh_str_id = 0; |
| ppseudo_hdr->control = 0; |
| ppseudo_hdr->rsvd1 = 0; |
| ppseudo_hdr->rsvd2 = 0; |
| ppseudo_hdr->qos_class = 0; |
| /* Insert slow queue sequence number */ |
| ppseudo_hdr->seq_num = info->squeseqnum++; |
| /* Insert application id */ |
| ppseudo_hdr->portsrc = 0; |
| /* Calculate new checksum */ |
| ppseudo_hdr->checksum = *pmsg++; |
| for (i = 1; i < 7; i++) |
| ppseudo_hdr->checksum ^= *pmsg++; |
| |
| pmsg = (u16 *) &tempbuffer[16]; |
| *pmsg++ = htons(RSP_DRV_ERR_RPT_MSG); |
| *pmsg++ = htons(0x000e); |
| *pmsg++ = htons(info->DSP_TIME[0]); |
| *pmsg++ = htons(info->DSP_TIME[1]); |
| *pmsg++ = htons(info->DSP_TIME[2]); |
| *pmsg++ = htons(info->DSP_TIME[3]); |
| convert.byte[0] = info->DspVer[0]; |
| convert.byte[1] = info->DspVer[1]; |
| *pmsg++ = convert.wrd; |
| convert.byte[0] = info->DspVer[2]; |
| convert.byte[1] = info->DspVer[3]; |
| *pmsg++ = convert.wrd; |
| *pmsg++ = htons(info->DrvErrNum); |
| |
| card_send_command(dev, |
| (unsigned char *)&tempbuffer[0], |
| (u16) (0x0012 + PSEUDOSZ)); |
| info->DrvErrNum = 0; |
| } |
| info->DrvMsgPend = 0; |
| |
| break; |
| } |
| |
| default: |
| break; |
| } |
| |
| status = STATUS_SUCCESS; |
| out: |
| kfree(cmdbuffer); |
| DEBUG("return from ft1000_proc_drvmsg\n"); |
| return status; |
| } |
| |
| int ft1000_poll(void* dev_id) { |
| |
| struct ft1000_device *dev = (struct ft1000_device *)dev_id; |
| struct ft1000_info *info = netdev_priv(dev->net); |
| |
| u16 tempword; |
| u16 status; |
| u16 size; |
| int i; |
| u16 data; |
| u16 modulo; |
| u16 portid; |
| u16 nxtph; |
| struct dpram_blk *pdpram_blk; |
| struct pseudo_hdr *ppseudo_hdr; |
| unsigned long flags; |
| |
| if (ft1000_chkcard(dev) == FALSE) { |
| DEBUG("ft1000_poll::ft1000_chkcard: failed\n"); |
| return STATUS_FAILURE; |
| } |
| |
| status = ft1000_read_register (dev, &tempword, FT1000_REG_DOORBELL); |
| |
| if ( !status ) |
| { |
| |
| if (tempword & FT1000_DB_DPRAM_RX) { |
| |
| status = ft1000_read_dpram16(dev, 0x200, (u8 *)&data, 0); |
| size = ntohs(data) + 16 + 2; |
| if (size % 4) { |
| modulo = 4 - (size % 4); |
| size = size + modulo; |
| } |
| status = ft1000_read_dpram16(dev, 0x201, (u8 *)&portid, 1); |
| portid &= 0xff; |
| |
| if (size < MAX_CMD_SQSIZE) { |
| switch (portid) |
| { |
| case DRIVERID: |
| DEBUG("ft1000_poll: FT1000_REG_DOORBELL message type: FT1000_DB_DPRAM_RX : portid DRIVERID\n"); |
| |
| status = ft1000_proc_drvmsg (dev, size); |
| if (status != STATUS_SUCCESS ) |
| return status; |
| break; |
| case DSPBCMSGID: |
| // This is a dsp broadcast message |
| // Check which application has registered for dsp broadcast messages |
| |
| for (i=0; i<MAX_NUM_APP; i++) { |
| if ( (info->app_info[i].DspBCMsgFlag) && (info->app_info[i].fileobject) && |
| (info->app_info[i].NumOfMsg < MAX_MSG_LIMIT) ) |
| { |
| nxtph = FT1000_DPRAM_RX_BASE + 2; |
| pdpram_blk = ft1000_get_buffer (&freercvpool); |
| if (pdpram_blk != NULL) { |
| if ( ft1000_receive_cmd(dev, pdpram_blk->pbuffer, MAX_CMD_SQSIZE, &nxtph) ) { |
| ppseudo_hdr = (struct pseudo_hdr *)pdpram_blk->pbuffer; |
| // Put message into the appropriate application block |
| info->app_info[i].nRxMsg++; |
| spin_lock_irqsave(&free_buff_lock, flags); |
| list_add_tail(&pdpram_blk->list, &info->app_info[i].app_sqlist); |
| info->app_info[i].NumOfMsg++; |
| spin_unlock_irqrestore(&free_buff_lock, flags); |
| wake_up_interruptible(&info->app_info[i].wait_dpram_msg); |
| } |
| else { |
| info->app_info[i].nRxMsgMiss++; |
| // Put memory back to free pool |
| ft1000_free_buffer(pdpram_blk, &freercvpool); |
| DEBUG("pdpram_blk::ft1000_get_buffer NULL\n"); |
| } |
| } |
| else { |
| DEBUG("Out of memory in free receive command pool\n"); |
| info->app_info[i].nRxMsgMiss++; |
| } |
| } |
| } |
| break; |
| default: |
| pdpram_blk = ft1000_get_buffer (&freercvpool); |
| |
| if (pdpram_blk != NULL) { |
| if ( ft1000_receive_cmd(dev, pdpram_blk->pbuffer, MAX_CMD_SQSIZE, &nxtph) ) { |
| ppseudo_hdr = (struct pseudo_hdr *)pdpram_blk->pbuffer; |
| // Search for correct application block |
| for (i=0; i<MAX_NUM_APP; i++) { |
| if (info->app_info[i].app_id == ppseudo_hdr->portdest) { |
| break; |
| } |
| } |
| |
| if (i == MAX_NUM_APP) { |
| DEBUG("FT1000:ft1000_parse_dpram_msg: No application matching id = %d\n", ppseudo_hdr->portdest); |
| // Put memory back to free pool |
| ft1000_free_buffer(pdpram_blk, &freercvpool); |
| } |
| else { |
| if (info->app_info[i].NumOfMsg > MAX_MSG_LIMIT) { |
| // Put memory back to free pool |
| ft1000_free_buffer(pdpram_blk, &freercvpool); |
| } |
| else { |
| info->app_info[i].nRxMsg++; |
| // Put message into the appropriate application block |
| list_add_tail(&pdpram_blk->list, &info->app_info[i].app_sqlist); |
| info->app_info[i].NumOfMsg++; |
| } |
| } |
| } |
| else { |
| // Put memory back to free pool |
| ft1000_free_buffer(pdpram_blk, &freercvpool); |
| } |
| } |
| else { |
| DEBUG("Out of memory in free receive command pool\n"); |
| } |
| break; |
| } |
| } |
| else { |
| DEBUG("FT1000:dpc:Invalid total length for SlowQ = %d\n", size); |
| } |
| status = ft1000_write_register (dev, FT1000_DB_DPRAM_RX, FT1000_REG_DOORBELL); |
| } |
| else if (tempword & FT1000_DSP_ASIC_RESET) { |
| |
| // Let's reset the ASIC from the Host side as well |
| status = ft1000_write_register (dev, ASIC_RESET_BIT, FT1000_REG_RESET); |
| status = ft1000_read_register (dev, &tempword, FT1000_REG_RESET); |
| i = 0; |
| while (tempword & ASIC_RESET_BIT) { |
| status = ft1000_read_register (dev, &tempword, FT1000_REG_RESET); |
| msleep(10); |
| i++; |
| if (i==100) |
| break; |
| } |
| if (i==100) { |
| DEBUG("Unable to reset ASIC\n"); |
| return STATUS_SUCCESS; |
| } |
| msleep(10); |
| // Program WMARK register |
| status = ft1000_write_register (dev, 0x600, FT1000_REG_MAG_WATERMARK); |
| // clear ASIC reset doorbell |
| status = ft1000_write_register (dev, FT1000_DSP_ASIC_RESET, FT1000_REG_DOORBELL); |
| msleep(10); |
| } |
| else if (tempword & FT1000_ASIC_RESET_REQ) { |
| DEBUG("ft1000_poll: FT1000_REG_DOORBELL message type: FT1000_ASIC_RESET_REQ\n"); |
| |
| // clear ASIC reset request from DSP |
| status = ft1000_write_register (dev, FT1000_ASIC_RESET_REQ, FT1000_REG_DOORBELL); |
| status = ft1000_write_register (dev, HOST_INTF_BE, FT1000_REG_SUP_CTRL); |
| // copy dsp session record from Adapter block |
| status = ft1000_write_dpram32 (dev, 0, (u8 *)&info->DSPSess.Rec[0], 1024); |
| // Program WMARK register |
| status = ft1000_write_register (dev, 0x600, FT1000_REG_MAG_WATERMARK); |
| // ring doorbell to tell DSP that ASIC is out of reset |
| status = ft1000_write_register (dev, FT1000_ASIC_RESET_DSP, FT1000_REG_DOORBELL); |
| } |
| else if (tempword & FT1000_DB_COND_RESET) { |
| DEBUG("ft1000_poll: FT1000_REG_DOORBELL message type: FT1000_DB_COND_RESET\n"); |
| |
| if (info->fAppMsgPend == 0) { |
| // Reset ASIC and DSP |
| |
| status = ft1000_read_dpram16(dev, FT1000_MAG_DSP_TIMER0, (u8 *)&(info->DSP_TIME[0]), FT1000_MAG_DSP_TIMER0_INDX); |
| status = ft1000_read_dpram16(dev, FT1000_MAG_DSP_TIMER1, (u8 *)&(info->DSP_TIME[1]), FT1000_MAG_DSP_TIMER1_INDX); |
| status = ft1000_read_dpram16(dev, FT1000_MAG_DSP_TIMER2, (u8 *)&(info->DSP_TIME[2]), FT1000_MAG_DSP_TIMER2_INDX); |
| status = ft1000_read_dpram16(dev, FT1000_MAG_DSP_TIMER3, (u8 *)&(info->DSP_TIME[3]), FT1000_MAG_DSP_TIMER3_INDX); |
| info->CardReady = 0; |
| info->DrvErrNum = DSP_CONDRESET_INFO; |
| DEBUG("ft1000_hw:DSP conditional reset requested\n"); |
| info->ft1000_reset(dev->net); |
| } |
| else { |
| info->fProvComplete = 0; |
| info->fCondResetPend = 1; |
| } |
| |
| ft1000_write_register(dev, FT1000_DB_COND_RESET, FT1000_REG_DOORBELL); |
| } |
| |
| } |
| |
| return STATUS_SUCCESS; |
| |
| } |