include/linux/amba/pl08x.h - kernel/mindspeed - Git at Google

 /*
  * linux/amba/pl08x.h - ARM PrimeCell DMA Controller driver
  *
  * Copyright (C) 2005 ARM Ltd
  * Copyright (C) 2010 ST-Ericsson SA
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
  * pl08x information required by platform code
  *
  * Please credit ARM.com
  * Documentation: ARM DDI 0196D
  */

 #ifndef AMBA_PL08X_H
 #define AMBA_PL08X_H

 /* We need sizes of structs from this header */
 #include <linux/dmaengine.h>
 #include <linux/interrupt.h>

 struct pl08x_lli;
 struct pl08x_driver_data;

 /* Bitmasks for selecting AHB ports for DMA transfers */
 enum {
 	PL08X_AHB1 = (1 << 0),
 	PL08X_AHB2 = (1 << 1)
 };

 /**
  * struct pl08x_channel_data - data structure to pass info between
  * platform and PL08x driver regarding channel configuration
  * @bus_id: name of this device channel, not just a device name since
  * devices may have more than one channel e.g. "foo_tx"
  * @min_signal: the minimum DMA signal number to be muxed in for this
  * channel (for platforms supporting muxed signals). If you have
  * static assignments, make sure this is set to the assigned signal
  * number, PL08x have 16 possible signals in number 0 thru 15 so
  * when these are not enough they often get muxed (in hardware)
  * disabling simultaneous use of the same channel for two devices.
  * @max_signal: the maximum DMA signal number to be muxed in for
  * the channel. Set to the same as min_signal for
  * devices with static assignments
  * @muxval: a number usually used to poke into some mux regiser to
  * mux in the signal to this channel
  * @cctl_opt: default options for the channel control register
  * @device_fc: Flow Controller Settings for ccfg register. Only valid for slave
  * channels. Fill with 'true' if peripheral should be flow controller. Direction
  * will be selected at Runtime.
  * @addr: source/target address in physical memory for this DMA channel,
  * can be the address of a FIFO register for burst requests for example.
  * This can be left undefined if the PrimeCell API is used for configuring
  * this.
  * @circular_buffer: whether the buffer passed in is circular and
  * shall simply be looped round round (like a record baby round
  * round round round)
  * @single: the device connected to this channel will request single DMA
  * transfers, not bursts. (Bursts are default.)
  * @periph_buses: the device connected to this channel is accessible via
  * these buses (use PL08X_AHB1 | PL08X_AHB2).
  */
 struct pl08x_channel_data {
 	char *bus_id;
 	int min_signal;
 	int max_signal;
 	u32 muxval;
 	u32 cctl;
 	bool device_fc;
 	dma_addr_t addr;
 	bool circular_buffer;
 	bool single;
 	u8 periph_buses;
 };

 /**
  * Struct pl08x_bus_data - information of source or destination
  * busses for a transfer
  * @addr: current address
  * @maxwidth: the maximum width of a transfer on this bus
  * @buswidth: the width of this bus in bytes: 1, 2 or 4
  */
 struct pl08x_bus_data {
 	dma_addr_t addr;
 	u8 maxwidth;
 	u8 buswidth;
 };

 /**
  * struct pl08x_phy_chan - holder for the physical channels
  * @id: physical index to this channel
  * @lock: a lock to use when altering an instance of this struct
  * @signal: the physical signal (aka channel) serving this physical channel
  * right now
  * @serving: the virtual channel currently being served by this physical
  * channel
  */
 struct pl08x_phy_chan {
 	unsigned int id;
 	void __iomem *base;
 	spinlock_t lock;
 	int signal;
 	struct pl08x_dma_chan *serving;
 };

 /**
  * struct pl08x_sg - structure containing data per sg
  * @src_addr: src address of sg
  * @dst_addr: dst address of sg
  * @len: transfer len in bytes
  * @node: node for txd's dsg_list
  */
 struct pl08x_sg {
 	dma_addr_t src_addr;
 	dma_addr_t dst_addr;
 	size_t len;
 	struct list_head node;
 };

 /**
  * struct pl08x_txd - wrapper for struct dma_async_tx_descriptor
  * @tx: async tx descriptor
  * @node: node for txd list for channels
  * @dsg_list: list of children sg's
  * @direction: direction of transfer
  * @llis_bus: DMA memory address (physical) start for the LLIs
  * @llis_va: virtual memory address start for the LLIs
  * @cctl: control reg values for current txd
  * @ccfg: config reg values for current txd
  */
 struct pl08x_txd {
 	struct dma_async_tx_descriptor tx;
 	struct list_head node;
 	struct list_head dsg_list;
 	enum dma_data_direction	direction;
 	dma_addr_t llis_bus;
 	struct pl08x_lli *llis_va;
 	/* Default cctl value for LLIs */
 	u32 cctl;
 	/*
 	 * Settings to be put into the physical channel when we
 	 * trigger this txd.  Other registers are in llis_va[0].
 	 */
 	u32 ccfg;
 };

 /**
  * struct pl08x_dma_chan_state - holds the PL08x specific virtual channel
  * states
  * @PL08X_CHAN_IDLE: the channel is idle
  * @PL08X_CHAN_RUNNING: the channel has allocated a physical transport
  * channel and is running a transfer on it
  * @PL08X_CHAN_PAUSED: the channel has allocated a physical transport
  * channel, but the transfer is currently paused
  * @PL08X_CHAN_WAITING: the channel is waiting for a physical transport
  * channel to become available (only pertains to memcpy channels)
  */
 enum pl08x_dma_chan_state {
 	PL08X_CHAN_IDLE,
 	PL08X_CHAN_RUNNING,
 	PL08X_CHAN_PAUSED,
 	PL08X_CHAN_WAITING,
 };

 /**
  * struct pl08x_dma_chan - this structure wraps a DMA ENGINE channel
  * @chan: wrappped abstract channel
  * @phychan: the physical channel utilized by this channel, if there is one
  * @phychan_hold: if non-zero, hold on to the physical channel even if we
  * have no pending entries
  * @tasklet: tasklet scheduled by the IRQ to handle actual work etc
  * @name: name of channel
  * @cd: channel platform data
  * @runtime_addr: address for RX/TX according to the runtime config
  * @runtime_direction: current direction of this channel according to
  * runtime config
  * @lc: last completed transaction on this channel
  * @pend_list: queued transactions pending on this channel
  * @at: active transaction on this channel
  * @lock: a lock for this channel data
  * @host: a pointer to the host (internal use)
  * @state: whether the channel is idle, paused, running etc
  * @slave: whether this channel is a device (slave) or for memcpy
  * @waiting: a TX descriptor on this channel which is waiting for a physical
  * channel to become available
  */
 struct pl08x_dma_chan {
 	struct dma_chan chan;
 	struct pl08x_phy_chan *phychan;
 	int phychan_hold;
 	struct tasklet_struct tasklet;
 	char *name;
 	const struct pl08x_channel_data *cd;
 	dma_addr_t src_addr;
 	dma_addr_t dst_addr;
 	u32 src_cctl;
 	u32 dst_cctl;
 	enum dma_data_direction	runtime_direction;
 	dma_cookie_t lc;
 	struct list_head pend_list;
 	struct pl08x_txd *at;
 	spinlock_t lock;
 	struct pl08x_driver_data *host;
 	enum pl08x_dma_chan_state state;
 	bool slave;
 	struct pl08x_txd *waiting;
 };

 /**
  * struct pl08x_platform_data - the platform configuration for the PL08x
  * PrimeCells.
  * @slave_channels: the channels defined for the different devices on the
  * platform, all inclusive, including multiplexed channels. The available
  * physical channels will be multiplexed around these signals as they are
  * requested, just enumerate all possible channels.
  * @get_signal: request a physical signal to be used for a DMA transfer
  * immediately: if there is some multiplexing or similar blocking the use
  * of the channel the transfer can be denied by returning less than zero,
  * else it returns the allocated signal number
  * @put_signal: indicate to the platform that this physical signal is not
  * running any DMA transfer and multiplexing can be recycled
  * @lli_buses: buses which LLIs can be fetched from: PL08X_AHB1 | PL08X_AHB2
  * @mem_buses: buses which memory can be accessed from: PL08X_AHB1 | PL08X_AHB2
  */
 struct pl08x_platform_data {
 	const struct pl08x_channel_data *slave_channels;
 	unsigned int num_slave_channels;
 	struct pl08x_channel_data memcpy_channel;
 	int (*get_signal)(struct pl08x_dma_chan *);
 	void (*put_signal)(struct pl08x_dma_chan *);
 	u8 lli_buses;
 	u8 mem_buses;
 };

 #ifdef CONFIG_AMBA_PL08X
 bool pl08x_filter_id(struct dma_chan *chan, void *chan_id);
 #else
 static inline bool pl08x_filter_id(struct dma_chan *chan, void *chan_id)
 {
 	return false;
 }
 #endif

 #endif	/* AMBA_PL08X_H */
	/*
	* linux/amba/pl08x.h - ARM PrimeCell DMA Controller driver
	*
	* Copyright (C) 2005 ARM Ltd
	* Copyright (C) 2010 ST-Ericsson SA
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 as
	* published by the Free Software Foundation.
	*
	* pl08x information required by platform code
	*
	* Please credit ARM.com
	* Documentation: ARM DDI 0196D
	*/

	#ifndef AMBA_PL08X_H
	#define AMBA_PL08X_H

	/* We need sizes of structs from this header */
	#include <linux/dmaengine.h>
	#include <linux/interrupt.h>

	struct pl08x_lli;
	struct pl08x_driver_data;

	/* Bitmasks for selecting AHB ports for DMA transfers */
	enum {
	PL08X_AHB1 = (1 << 0),
	PL08X_AHB2 = (1 << 1)
	};

	/**
	* struct pl08x_channel_data - data structure to pass info between
	* platform and PL08x driver regarding channel configuration
	* @bus_id: name of this device channel, not just a device name since
	* devices may have more than one channel e.g. "foo_tx"
	* @min_signal: the minimum DMA signal number to be muxed in for this
	* channel (for platforms supporting muxed signals). If you have
	* static assignments, make sure this is set to the assigned signal
	* number, PL08x have 16 possible signals in number 0 thru 15 so
	* when these are not enough they often get muxed (in hardware)
	* disabling simultaneous use of the same channel for two devices.
	* @max_signal: the maximum DMA signal number to be muxed in for
	* the channel. Set to the same as min_signal for
	* devices with static assignments
	* @muxval: a number usually used to poke into some mux regiser to
	* mux in the signal to this channel
	* @cctl_opt: default options for the channel control register
	* @device_fc: Flow Controller Settings for ccfg register. Only valid for slave
	* channels. Fill with 'true' if peripheral should be flow controller. Direction
	* will be selected at Runtime.
	* @addr: source/target address in physical memory for this DMA channel,
	* can be the address of a FIFO register for burst requests for example.
	* This can be left undefined if the PrimeCell API is used for configuring
	* this.
	* @circular_buffer: whether the buffer passed in is circular and
	* shall simply be looped round round (like a record baby round
	* round round round)
	* @single: the device connected to this channel will request single DMA
	* transfers, not bursts. (Bursts are default.)
	* @periph_buses: the device connected to this channel is accessible via
	* these buses (use PL08X_AHB1 \| PL08X_AHB2).
	*/
	struct pl08x_channel_data {
	char *bus_id;
	int min_signal;
	int max_signal;
	u32 muxval;
	u32 cctl;
	bool device_fc;
	dma_addr_t addr;
	bool circular_buffer;
	bool single;
	u8 periph_buses;
	};

	/**
	* Struct pl08x_bus_data - information of source or destination
	* busses for a transfer
	* @addr: current address
	* @maxwidth: the maximum width of a transfer on this bus
	* @buswidth: the width of this bus in bytes: 1, 2 or 4
	*/
	struct pl08x_bus_data {
	dma_addr_t addr;
	u8 maxwidth;
	u8 buswidth;
	};

	/**
	* struct pl08x_phy_chan - holder for the physical channels
	* @id: physical index to this channel
	* @lock: a lock to use when altering an instance of this struct
	* @signal: the physical signal (aka channel) serving this physical channel
	* right now
	* @serving: the virtual channel currently being served by this physical
	* channel
	*/
	struct pl08x_phy_chan {
	unsigned int id;
	void __iomem *base;
	spinlock_t lock;
	int signal;
	struct pl08x_dma_chan *serving;
	};

	/**
	* struct pl08x_sg - structure containing data per sg
	* @src_addr: src address of sg
	* @dst_addr: dst address of sg
	* @len: transfer len in bytes
	* @node: node for txd's dsg_list
	*/
	struct pl08x_sg {
	dma_addr_t src_addr;
	dma_addr_t dst_addr;
	size_t len;
	struct list_head node;
	};

	/**
	* struct pl08x_txd - wrapper for struct dma_async_tx_descriptor
	* @tx: async tx descriptor
	* @node: node for txd list for channels
	* @dsg_list: list of children sg's
	* @direction: direction of transfer
	* @llis_bus: DMA memory address (physical) start for the LLIs
	* @llis_va: virtual memory address start for the LLIs
	* @cctl: control reg values for current txd
	* @ccfg: config reg values for current txd
	*/
	struct pl08x_txd {
	struct dma_async_tx_descriptor tx;
	struct list_head node;
	struct list_head dsg_list;
	enum dma_data_direction direction;
	dma_addr_t llis_bus;
	struct pl08x_lli *llis_va;
	/* Default cctl value for LLIs */
	u32 cctl;
	/*
	* Settings to be put into the physical channel when we
	* trigger this txd. Other registers are in llis_va[0].
	*/
	u32 ccfg;
	};

	/**
	* struct pl08x_dma_chan_state - holds the PL08x specific virtual channel
	* states
	* @PL08X_CHAN_IDLE: the channel is idle
	* @PL08X_CHAN_RUNNING: the channel has allocated a physical transport
	* channel and is running a transfer on it
	* @PL08X_CHAN_PAUSED: the channel has allocated a physical transport
	* channel, but the transfer is currently paused
	* @PL08X_CHAN_WAITING: the channel is waiting for a physical transport
	* channel to become available (only pertains to memcpy channels)
	*/
	enum pl08x_dma_chan_state {
	PL08X_CHAN_IDLE,
	PL08X_CHAN_RUNNING,
	PL08X_CHAN_PAUSED,
	PL08X_CHAN_WAITING,
	};

	/**
	* struct pl08x_dma_chan - this structure wraps a DMA ENGINE channel
	* @chan: wrappped abstract channel
	* @phychan: the physical channel utilized by this channel, if there is one
	* @phychan_hold: if non-zero, hold on to the physical channel even if we
	* have no pending entries
	* @tasklet: tasklet scheduled by the IRQ to handle actual work etc
	* @name: name of channel
	* @cd: channel platform data
	* @runtime_addr: address for RX/TX according to the runtime config
	* @runtime_direction: current direction of this channel according to
	* runtime config
	* @lc: last completed transaction on this channel
	* @pend_list: queued transactions pending on this channel
	* @at: active transaction on this channel
	* @lock: a lock for this channel data
	* @host: a pointer to the host (internal use)
	* @state: whether the channel is idle, paused, running etc
	* @slave: whether this channel is a device (slave) or for memcpy
	* @waiting: a TX descriptor on this channel which is waiting for a physical
	* channel to become available
	*/
	struct pl08x_dma_chan {
	struct dma_chan chan;
	struct pl08x_phy_chan *phychan;
	int phychan_hold;
	struct tasklet_struct tasklet;
	char *name;
	const struct pl08x_channel_data *cd;
	dma_addr_t src_addr;
	dma_addr_t dst_addr;
	u32 src_cctl;
	u32 dst_cctl;
	enum dma_data_direction runtime_direction;
	dma_cookie_t lc;
	struct list_head pend_list;
	struct pl08x_txd *at;
	spinlock_t lock;
	struct pl08x_driver_data *host;
	enum pl08x_dma_chan_state state;
	bool slave;
	struct pl08x_txd *waiting;
	};

	/**
	* struct pl08x_platform_data - the platform configuration for the PL08x
	* PrimeCells.
	* @slave_channels: the channels defined for the different devices on the
	* platform, all inclusive, including multiplexed channels. The available
	* physical channels will be multiplexed around these signals as they are
	* requested, just enumerate all possible channels.
	* @get_signal: request a physical signal to be used for a DMA transfer
	* immediately: if there is some multiplexing or similar blocking the use
	* of the channel the transfer can be denied by returning less than zero,
	* else it returns the allocated signal number
	* @put_signal: indicate to the platform that this physical signal is not
	* running any DMA transfer and multiplexing can be recycled
	* @lli_buses: buses which LLIs can be fetched from: PL08X_AHB1 \| PL08X_AHB2
	* @mem_buses: buses which memory can be accessed from: PL08X_AHB1 \| PL08X_AHB2
	*/
	struct pl08x_platform_data {
	const struct pl08x_channel_data *slave_channels;
	unsigned int num_slave_channels;
	struct pl08x_channel_data memcpy_channel;
	int (get_signal)(struct pl08x_dma_chan );
	void (put_signal)(struct pl08x_dma_chan );
	u8 lli_buses;
	u8 mem_buses;
	};

	#ifdef CONFIG_AMBA_PL08X
	bool pl08x_filter_id(struct dma_chan chan, void chan_id);
	#else
	static inline bool pl08x_filter_id(struct dma_chan chan, void chan_id)
	{
	return false;
	}
	#endif

	#endif /* AMBA_PL08X_H */