| /* |
| * Author: Andy Fleming <afleming@freescale.com> |
| * Kumar Gala <galak@kernel.crashing.org> |
| * |
| * Copyright 2006-2008, 2011 Freescale Semiconductor Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #include <linux/stddef.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/of.h> |
| #include <linux/kexec.h> |
| #include <linux/highmem.h> |
| |
| #include <asm/machdep.h> |
| #include <asm/pgtable.h> |
| #include <asm/page.h> |
| #include <asm/mpic.h> |
| #include <asm/cacheflush.h> |
| #include <asm/dbell.h> |
| |
| #include <sysdev/fsl_soc.h> |
| #include <sysdev/mpic.h> |
| |
| extern void __early_start(void); |
| |
| #define BOOT_ENTRY_ADDR_UPPER 0 |
| #define BOOT_ENTRY_ADDR_LOWER 1 |
| #define BOOT_ENTRY_R3_UPPER 2 |
| #define BOOT_ENTRY_R3_LOWER 3 |
| #define BOOT_ENTRY_RESV 4 |
| #define BOOT_ENTRY_PIR 5 |
| #define BOOT_ENTRY_R6_UPPER 6 |
| #define BOOT_ENTRY_R6_LOWER 7 |
| #define NUM_BOOT_ENTRY 8 |
| #define SIZE_BOOT_ENTRY (NUM_BOOT_ENTRY * sizeof(u32)) |
| |
| static int __init |
| smp_85xx_kick_cpu(int nr) |
| { |
| unsigned long flags; |
| const u64 *cpu_rel_addr; |
| __iomem u32 *bptr_vaddr; |
| struct device_node *np; |
| int n = 0, hw_cpu = get_hard_smp_processor_id(nr); |
| int ioremappable; |
| |
| WARN_ON(nr < 0 || nr >= NR_CPUS); |
| WARN_ON(hw_cpu < 0 || hw_cpu >= NR_CPUS); |
| |
| pr_debug("smp_85xx_kick_cpu: kick CPU #%d\n", nr); |
| |
| np = of_get_cpu_node(nr, NULL); |
| cpu_rel_addr = of_get_property(np, "cpu-release-addr", NULL); |
| |
| if (cpu_rel_addr == NULL) { |
| printk(KERN_ERR "No cpu-release-addr for cpu %d\n", nr); |
| return -ENOENT; |
| } |
| |
| /* |
| * A secondary core could be in a spinloop in the bootpage |
| * (0xfffff000), somewhere in highmem, or somewhere in lowmem. |
| * The bootpage and highmem can be accessed via ioremap(), but |
| * we need to directly access the spinloop if its in lowmem. |
| */ |
| ioremappable = *cpu_rel_addr > virt_to_phys(high_memory); |
| |
| /* Map the spin table */ |
| if (ioremappable) |
| bptr_vaddr = ioremap(*cpu_rel_addr, SIZE_BOOT_ENTRY); |
| else |
| bptr_vaddr = phys_to_virt(*cpu_rel_addr); |
| |
| local_irq_save(flags); |
| |
| out_be32(bptr_vaddr + BOOT_ENTRY_PIR, hw_cpu); |
| #ifdef CONFIG_PPC32 |
| out_be32(bptr_vaddr + BOOT_ENTRY_ADDR_LOWER, __pa(__early_start)); |
| |
| if (!ioremappable) |
| flush_dcache_range((ulong)bptr_vaddr, |
| (ulong)(bptr_vaddr + SIZE_BOOT_ENTRY)); |
| |
| /* Wait a bit for the CPU to ack. */ |
| while ((__secondary_hold_acknowledge != hw_cpu) && (++n < 1000)) |
| mdelay(1); |
| #else |
| smp_generic_kick_cpu(nr); |
| |
| out_be64((u64 *)(bptr_vaddr + BOOT_ENTRY_ADDR_UPPER), |
| __pa((u64)*((unsigned long long *) generic_secondary_smp_init))); |
| |
| if (!ioremappable) |
| flush_dcache_range((ulong)bptr_vaddr, |
| (ulong)(bptr_vaddr + SIZE_BOOT_ENTRY)); |
| #endif |
| |
| local_irq_restore(flags); |
| |
| if (ioremappable) |
| iounmap(bptr_vaddr); |
| |
| pr_debug("waited %d msecs for CPU #%d.\n", n, nr); |
| |
| return 0; |
| } |
| |
| struct smp_ops_t smp_85xx_ops = { |
| .kick_cpu = smp_85xx_kick_cpu, |
| #ifdef CONFIG_KEXEC |
| .give_timebase = smp_generic_give_timebase, |
| .take_timebase = smp_generic_take_timebase, |
| #endif |
| }; |
| |
| #ifdef CONFIG_KEXEC |
| atomic_t kexec_down_cpus = ATOMIC_INIT(0); |
| |
| void mpc85xx_smp_kexec_cpu_down(int crash_shutdown, int secondary) |
| { |
| local_irq_disable(); |
| |
| if (secondary) { |
| atomic_inc(&kexec_down_cpus); |
| /* loop forever */ |
| while (1); |
| } |
| } |
| |
| static void mpc85xx_smp_kexec_down(void *arg) |
| { |
| if (ppc_md.kexec_cpu_down) |
| ppc_md.kexec_cpu_down(0,1); |
| } |
| |
| static void map_and_flush(unsigned long paddr) |
| { |
| struct page *page = pfn_to_page(paddr >> PAGE_SHIFT); |
| unsigned long kaddr = (unsigned long)kmap(page); |
| |
| flush_dcache_range(kaddr, kaddr + PAGE_SIZE); |
| kunmap(page); |
| } |
| |
| /** |
| * Before we reset the other cores, we need to flush relevant cache |
| * out to memory so we don't get anything corrupted, some of these flushes |
| * are performed out of an overabundance of caution as interrupts are not |
| * disabled yet and we can switch cores |
| */ |
| static void mpc85xx_smp_flush_dcache_kexec(struct kimage *image) |
| { |
| kimage_entry_t *ptr, entry; |
| unsigned long paddr; |
| int i; |
| |
| if (image->type == KEXEC_TYPE_DEFAULT) { |
| /* normal kexec images are stored in temporary pages */ |
| for (ptr = &image->head; (entry = *ptr) && !(entry & IND_DONE); |
| ptr = (entry & IND_INDIRECTION) ? |
| phys_to_virt(entry & PAGE_MASK) : ptr + 1) { |
| if (!(entry & IND_DESTINATION)) { |
| map_and_flush(entry); |
| } |
| } |
| /* flush out last IND_DONE page */ |
| map_and_flush(entry); |
| } else { |
| /* crash type kexec images are copied to the crash region */ |
| for (i = 0; i < image->nr_segments; i++) { |
| struct kexec_segment *seg = &image->segment[i]; |
| for (paddr = seg->mem; paddr < seg->mem + seg->memsz; |
| paddr += PAGE_SIZE) { |
| map_and_flush(paddr); |
| } |
| } |
| } |
| |
| /* also flush the kimage struct to be passed in as well */ |
| flush_dcache_range((unsigned long)image, |
| (unsigned long)image + sizeof(*image)); |
| } |
| |
| static void mpc85xx_smp_machine_kexec(struct kimage *image) |
| { |
| int timeout = INT_MAX; |
| int i, num_cpus = num_present_cpus(); |
| |
| mpc85xx_smp_flush_dcache_kexec(image); |
| |
| if (image->type == KEXEC_TYPE_DEFAULT) |
| smp_call_function(mpc85xx_smp_kexec_down, NULL, 0); |
| |
| while ( (atomic_read(&kexec_down_cpus) != (num_cpus - 1)) && |
| ( timeout > 0 ) ) |
| { |
| timeout--; |
| } |
| |
| if ( !timeout ) |
| printk(KERN_ERR "Unable to bring down secondary cpu(s)"); |
| |
| for_each_online_cpu(i) |
| { |
| if ( i == smp_processor_id() ) continue; |
| mpic_reset_core(i); |
| } |
| |
| default_machine_kexec(image); |
| } |
| #endif /* CONFIG_KEXEC */ |
| |
| static void __init |
| smp_85xx_setup_cpu(int cpu_nr) |
| { |
| if (smp_85xx_ops.probe == smp_mpic_probe) |
| mpic_setup_this_cpu(); |
| |
| if (cpu_has_feature(CPU_FTR_DBELL)) |
| doorbell_setup_this_cpu(); |
| } |
| |
| void __init mpc85xx_smp_init(void) |
| { |
| struct device_node *np; |
| |
| smp_85xx_ops.setup_cpu = smp_85xx_setup_cpu; |
| |
| np = of_find_node_by_type(NULL, "open-pic"); |
| if (np) { |
| smp_85xx_ops.probe = smp_mpic_probe; |
| smp_85xx_ops.message_pass = smp_mpic_message_pass; |
| } |
| |
| if (cpu_has_feature(CPU_FTR_DBELL)) { |
| /* |
| * If left NULL, .message_pass defaults to |
| * smp_muxed_ipi_message_pass |
| */ |
| smp_85xx_ops.message_pass = NULL; |
| smp_85xx_ops.cause_ipi = doorbell_cause_ipi; |
| } |
| |
| smp_ops = &smp_85xx_ops; |
| |
| #ifdef CONFIG_KEXEC |
| ppc_md.kexec_cpu_down = mpc85xx_smp_kexec_cpu_down; |
| ppc_md.machine_kexec = mpc85xx_smp_machine_kexec; |
| #endif |
| } |