| /* |
| * arch/arm/mach-ixp23xx/core.c |
| * |
| * Core routines for IXP23xx chips |
| * |
| * Author: Deepak Saxena <dsaxena@plexity.net> |
| * |
| * Copyright 2005 (c) MontaVista Software, Inc. |
| * |
| * Based on 2.4 code Copyright 2004 (c) Intel Corporation |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/spinlock.h> |
| #include <linux/sched.h> |
| #include <linux/interrupt.h> |
| #include <linux/serial.h> |
| #include <linux/tty.h> |
| #include <linux/bitops.h> |
| #include <linux/serial_8250.h> |
| #include <linux/serial_core.h> |
| #include <linux/device.h> |
| #include <linux/mm.h> |
| #include <linux/time.h> |
| #include <linux/timex.h> |
| |
| #include <asm/types.h> |
| #include <asm/setup.h> |
| #include <asm/memory.h> |
| #include <mach/hardware.h> |
| #include <asm/irq.h> |
| #include <asm/system.h> |
| #include <asm/tlbflush.h> |
| #include <asm/pgtable.h> |
| |
| #include <asm/mach/map.h> |
| #include <asm/mach/time.h> |
| #include <asm/mach/irq.h> |
| #include <asm/mach/arch.h> |
| |
| |
| /************************************************************************* |
| * Chip specific mappings shared by all IXP23xx systems |
| *************************************************************************/ |
| static struct map_desc ixp23xx_io_desc[] __initdata = { |
| { /* XSI-CPP CSRs */ |
| .virtual = IXP23XX_XSI2CPP_CSR_VIRT, |
| .pfn = __phys_to_pfn(IXP23XX_XSI2CPP_CSR_PHYS), |
| .length = IXP23XX_XSI2CPP_CSR_SIZE, |
| .type = MT_DEVICE, |
| }, { /* Expansion Bus Config */ |
| .virtual = IXP23XX_EXP_CFG_VIRT, |
| .pfn = __phys_to_pfn(IXP23XX_EXP_CFG_PHYS), |
| .length = IXP23XX_EXP_CFG_SIZE, |
| .type = MT_DEVICE, |
| }, { /* UART, Interrupt ctrl, GPIO, timers, NPEs, MACS,.... */ |
| .virtual = IXP23XX_PERIPHERAL_VIRT, |
| .pfn = __phys_to_pfn(IXP23XX_PERIPHERAL_PHYS), |
| .length = IXP23XX_PERIPHERAL_SIZE, |
| .type = MT_DEVICE, |
| }, { /* CAP CSRs */ |
| .virtual = IXP23XX_CAP_CSR_VIRT, |
| .pfn = __phys_to_pfn(IXP23XX_CAP_CSR_PHYS), |
| .length = IXP23XX_CAP_CSR_SIZE, |
| .type = MT_DEVICE, |
| }, { /* MSF CSRs */ |
| .virtual = IXP23XX_MSF_CSR_VIRT, |
| .pfn = __phys_to_pfn(IXP23XX_MSF_CSR_PHYS), |
| .length = IXP23XX_MSF_CSR_SIZE, |
| .type = MT_DEVICE, |
| }, { /* PCI I/O Space */ |
| .virtual = IXP23XX_PCI_IO_VIRT, |
| .pfn = __phys_to_pfn(IXP23XX_PCI_IO_PHYS), |
| .length = IXP23XX_PCI_IO_SIZE, |
| .type = MT_DEVICE, |
| }, { /* PCI Config Space */ |
| .virtual = IXP23XX_PCI_CFG_VIRT, |
| .pfn = __phys_to_pfn(IXP23XX_PCI_CFG_PHYS), |
| .length = IXP23XX_PCI_CFG_SIZE, |
| .type = MT_DEVICE, |
| }, { /* PCI local CFG CSRs */ |
| .virtual = IXP23XX_PCI_CREG_VIRT, |
| .pfn = __phys_to_pfn(IXP23XX_PCI_CREG_PHYS), |
| .length = IXP23XX_PCI_CREG_SIZE, |
| .type = MT_DEVICE, |
| }, { /* PCI MEM Space */ |
| .virtual = IXP23XX_PCI_MEM_VIRT, |
| .pfn = __phys_to_pfn(IXP23XX_PCI_MEM_PHYS), |
| .length = IXP23XX_PCI_MEM_SIZE, |
| .type = MT_DEVICE, |
| } |
| }; |
| |
| void __init ixp23xx_map_io(void) |
| { |
| iotable_init(ixp23xx_io_desc, ARRAY_SIZE(ixp23xx_io_desc)); |
| } |
| |
| |
| /*************************************************************************** |
| * IXP23xx Interrupt Handling |
| ***************************************************************************/ |
| enum ixp23xx_irq_type { |
| IXP23XX_IRQ_LEVEL, IXP23XX_IRQ_EDGE |
| }; |
| |
| static void ixp23xx_config_irq(unsigned int, enum ixp23xx_irq_type); |
| |
| static int ixp23xx_irq_set_type(struct irq_data *d, unsigned int type) |
| { |
| int line = d->irq - IRQ_IXP23XX_GPIO6 + 6; |
| u32 int_style; |
| enum ixp23xx_irq_type irq_type; |
| volatile u32 *int_reg; |
| |
| /* |
| * Only GPIOs 6-15 are wired to interrupts on IXP23xx |
| */ |
| if (line < 6 || line > 15) |
| return -EINVAL; |
| |
| switch (type) { |
| case IRQ_TYPE_EDGE_BOTH: |
| int_style = IXP23XX_GPIO_STYLE_TRANSITIONAL; |
| irq_type = IXP23XX_IRQ_EDGE; |
| break; |
| case IRQ_TYPE_EDGE_RISING: |
| int_style = IXP23XX_GPIO_STYLE_RISING_EDGE; |
| irq_type = IXP23XX_IRQ_EDGE; |
| break; |
| case IRQ_TYPE_EDGE_FALLING: |
| int_style = IXP23XX_GPIO_STYLE_FALLING_EDGE; |
| irq_type = IXP23XX_IRQ_EDGE; |
| break; |
| case IRQ_TYPE_LEVEL_HIGH: |
| int_style = IXP23XX_GPIO_STYLE_ACTIVE_HIGH; |
| irq_type = IXP23XX_IRQ_LEVEL; |
| break; |
| case IRQ_TYPE_LEVEL_LOW: |
| int_style = IXP23XX_GPIO_STYLE_ACTIVE_LOW; |
| irq_type = IXP23XX_IRQ_LEVEL; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| ixp23xx_config_irq(d->irq, irq_type); |
| |
| if (line >= 8) { /* pins 8-15 */ |
| line -= 8; |
| int_reg = (volatile u32 *)IXP23XX_GPIO_GPIT2R; |
| } else { /* pins 0-7 */ |
| int_reg = (volatile u32 *)IXP23XX_GPIO_GPIT1R; |
| } |
| |
| /* |
| * Clear pending interrupts |
| */ |
| *IXP23XX_GPIO_GPISR = (1 << line); |
| |
| /* Clear the style for the appropriate pin */ |
| *int_reg &= ~(IXP23XX_GPIO_STYLE_MASK << |
| (line * IXP23XX_GPIO_STYLE_SIZE)); |
| |
| /* Set the new style */ |
| *int_reg |= (int_style << (line * IXP23XX_GPIO_STYLE_SIZE)); |
| |
| return 0; |
| } |
| |
| static void ixp23xx_irq_mask(struct irq_data *d) |
| { |
| volatile unsigned long *intr_reg; |
| unsigned int irq = d->irq; |
| |
| if (irq >= 56) |
| irq += 8; |
| |
| intr_reg = IXP23XX_INTR_EN1 + (irq / 32); |
| *intr_reg &= ~(1 << (irq % 32)); |
| } |
| |
| static void ixp23xx_irq_ack(struct irq_data *d) |
| { |
| int line = d->irq - IRQ_IXP23XX_GPIO6 + 6; |
| |
| if ((line < 6) || (line > 15)) |
| return; |
| |
| *IXP23XX_GPIO_GPISR = (1 << line); |
| } |
| |
| /* |
| * Level triggered interrupts on GPIO lines can only be cleared when the |
| * interrupt condition disappears. |
| */ |
| static void ixp23xx_irq_level_unmask(struct irq_data *d) |
| { |
| volatile unsigned long *intr_reg; |
| unsigned int irq = d->irq; |
| |
| ixp23xx_irq_ack(d); |
| |
| if (irq >= 56) |
| irq += 8; |
| |
| intr_reg = IXP23XX_INTR_EN1 + (irq / 32); |
| *intr_reg |= (1 << (irq % 32)); |
| } |
| |
| static void ixp23xx_irq_edge_unmask(struct irq_data *d) |
| { |
| volatile unsigned long *intr_reg; |
| unsigned int irq = d->irq; |
| |
| if (irq >= 56) |
| irq += 8; |
| |
| intr_reg = IXP23XX_INTR_EN1 + (irq / 32); |
| *intr_reg |= (1 << (irq % 32)); |
| } |
| |
| static struct irq_chip ixp23xx_irq_level_chip = { |
| .irq_ack = ixp23xx_irq_mask, |
| .irq_mask = ixp23xx_irq_mask, |
| .irq_unmask = ixp23xx_irq_level_unmask, |
| .irq_set_type = ixp23xx_irq_set_type |
| }; |
| |
| static struct irq_chip ixp23xx_irq_edge_chip = { |
| .irq_ack = ixp23xx_irq_ack, |
| .irq_mask = ixp23xx_irq_mask, |
| .irq_unmask = ixp23xx_irq_edge_unmask, |
| .irq_set_type = ixp23xx_irq_set_type |
| }; |
| |
| static void ixp23xx_pci_irq_mask(struct irq_data *d) |
| { |
| unsigned int irq = d->irq; |
| |
| *IXP23XX_PCI_XSCALE_INT_ENABLE &= ~(1 << (IRQ_IXP23XX_INTA + 27 - irq)); |
| } |
| |
| static void ixp23xx_pci_irq_unmask(struct irq_data *d) |
| { |
| unsigned int irq = d->irq; |
| |
| *IXP23XX_PCI_XSCALE_INT_ENABLE |= (1 << (IRQ_IXP23XX_INTA + 27 - irq)); |
| } |
| |
| /* |
| * TODO: Should this just be done at ASM level? |
| */ |
| static void pci_handler(unsigned int irq, struct irq_desc *desc) |
| { |
| u32 pci_interrupt; |
| unsigned int irqno; |
| |
| pci_interrupt = *IXP23XX_PCI_XSCALE_INT_STATUS; |
| |
| desc->irq_data.chip->irq_ack(&desc->irq_data); |
| |
| /* See which PCI_INTA, or PCI_INTB interrupted */ |
| if (pci_interrupt & (1 << 26)) { |
| irqno = IRQ_IXP23XX_INTB; |
| } else if (pci_interrupt & (1 << 27)) { |
| irqno = IRQ_IXP23XX_INTA; |
| } else { |
| BUG(); |
| } |
| |
| generic_handle_irq(irqno); |
| |
| desc->irq_data.chip->irq_unmask(&desc->irq_data); |
| } |
| |
| static struct irq_chip ixp23xx_pci_irq_chip = { |
| .irq_ack = ixp23xx_pci_irq_mask, |
| .irq_mask = ixp23xx_pci_irq_mask, |
| .irq_unmask = ixp23xx_pci_irq_unmask |
| }; |
| |
| static void ixp23xx_config_irq(unsigned int irq, enum ixp23xx_irq_type type) |
| { |
| switch (type) { |
| case IXP23XX_IRQ_LEVEL: |
| irq_set_chip_and_handler(irq, &ixp23xx_irq_level_chip, |
| handle_level_irq); |
| break; |
| case IXP23XX_IRQ_EDGE: |
| irq_set_chip_and_handler(irq, &ixp23xx_irq_edge_chip, |
| handle_edge_irq); |
| break; |
| } |
| set_irq_flags(irq, IRQF_VALID); |
| } |
| |
| void __init ixp23xx_init_irq(void) |
| { |
| int irq; |
| |
| /* Route everything to IRQ */ |
| *IXP23XX_INTR_SEL1 = 0x0; |
| *IXP23XX_INTR_SEL2 = 0x0; |
| *IXP23XX_INTR_SEL3 = 0x0; |
| *IXP23XX_INTR_SEL4 = 0x0; |
| |
| /* Mask all sources */ |
| *IXP23XX_INTR_EN1 = 0x0; |
| *IXP23XX_INTR_EN2 = 0x0; |
| *IXP23XX_INTR_EN3 = 0x0; |
| *IXP23XX_INTR_EN4 = 0x0; |
| |
| /* |
| * Configure all IRQs for level-sensitive operation |
| */ |
| for (irq = 0; irq <= NUM_IXP23XX_RAW_IRQS; irq++) { |
| ixp23xx_config_irq(irq, IXP23XX_IRQ_LEVEL); |
| } |
| |
| for (irq = IRQ_IXP23XX_INTA; irq <= IRQ_IXP23XX_INTB; irq++) { |
| irq_set_chip_and_handler(irq, &ixp23xx_pci_irq_chip, |
| handle_level_irq); |
| set_irq_flags(irq, IRQF_VALID); |
| } |
| |
| irq_set_chained_handler(IRQ_IXP23XX_PCI_INT_RPH, pci_handler); |
| } |
| |
| |
| /************************************************************************* |
| * Timer-tick functions for IXP23xx |
| *************************************************************************/ |
| #define CLOCK_TICKS_PER_USEC (CLOCK_TICK_RATE / USEC_PER_SEC) |
| |
| static unsigned long next_jiffy_time; |
| |
| static unsigned long |
| ixp23xx_gettimeoffset(void) |
| { |
| unsigned long elapsed; |
| |
| elapsed = *IXP23XX_TIMER_CONT - (next_jiffy_time - LATCH); |
| |
| return elapsed / CLOCK_TICKS_PER_USEC; |
| } |
| |
| static irqreturn_t |
| ixp23xx_timer_interrupt(int irq, void *dev_id) |
| { |
| /* Clear Pending Interrupt by writing '1' to it */ |
| *IXP23XX_TIMER_STATUS = IXP23XX_TIMER1_INT_PEND; |
| while ((signed long)(*IXP23XX_TIMER_CONT - next_jiffy_time) >= LATCH) { |
| timer_tick(); |
| next_jiffy_time += LATCH; |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static struct irqaction ixp23xx_timer_irq = { |
| .name = "IXP23xx Timer Tick", |
| .handler = ixp23xx_timer_interrupt, |
| .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, |
| }; |
| |
| void __init ixp23xx_init_timer(void) |
| { |
| /* Clear Pending Interrupt by writing '1' to it */ |
| *IXP23XX_TIMER_STATUS = IXP23XX_TIMER1_INT_PEND; |
| |
| /* Setup the Timer counter value */ |
| *IXP23XX_TIMER1_RELOAD = |
| (LATCH & ~IXP23XX_TIMER_RELOAD_MASK) | IXP23XX_TIMER_ENABLE; |
| |
| *IXP23XX_TIMER_CONT = 0; |
| next_jiffy_time = LATCH; |
| |
| /* Connect the interrupt handler and enable the interrupt */ |
| setup_irq(IRQ_IXP23XX_TIMER1, &ixp23xx_timer_irq); |
| } |
| |
| struct sys_timer ixp23xx_timer = { |
| .init = ixp23xx_init_timer, |
| .offset = ixp23xx_gettimeoffset, |
| }; |
| |
| |
| /************************************************************************* |
| * IXP23xx Platform Initialization |
| *************************************************************************/ |
| static struct resource ixp23xx_uart_resources[] = { |
| { |
| .start = IXP23XX_UART1_PHYS, |
| .end = IXP23XX_UART1_PHYS + 0x0fff, |
| .flags = IORESOURCE_MEM |
| }, { |
| .start = IXP23XX_UART2_PHYS, |
| .end = IXP23XX_UART2_PHYS + 0x0fff, |
| .flags = IORESOURCE_MEM |
| } |
| }; |
| |
| static struct plat_serial8250_port ixp23xx_uart_data[] = { |
| { |
| .mapbase = IXP23XX_UART1_PHYS, |
| .membase = (char *)(IXP23XX_UART1_VIRT + 3), |
| .irq = IRQ_IXP23XX_UART1, |
| .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, |
| .iotype = UPIO_MEM, |
| .regshift = 2, |
| .uartclk = IXP23XX_UART_XTAL, |
| }, { |
| .mapbase = IXP23XX_UART2_PHYS, |
| .membase = (char *)(IXP23XX_UART2_VIRT + 3), |
| .irq = IRQ_IXP23XX_UART2, |
| .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, |
| .iotype = UPIO_MEM, |
| .regshift = 2, |
| .uartclk = IXP23XX_UART_XTAL, |
| }, |
| { }, |
| }; |
| |
| static struct platform_device ixp23xx_uart = { |
| .name = "serial8250", |
| .id = 0, |
| .dev.platform_data = ixp23xx_uart_data, |
| .num_resources = 2, |
| .resource = ixp23xx_uart_resources, |
| }; |
| |
| static struct platform_device *ixp23xx_devices[] __initdata = { |
| &ixp23xx_uart, |
| }; |
| |
| void __init ixp23xx_sys_init(void) |
| { |
| *IXP23XX_EXP_UNIT_FUSE |= 0xf; |
| platform_add_devices(ixp23xx_devices, ARRAY_SIZE(ixp23xx_devices)); |
| } |