| /* |
| * MPC5121E ADS Device Tree Source |
| * |
| * Copyright 2007,2008 Freescale Semiconductor Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| /dts-v1/; |
| |
| / { |
| model = "mpc5121ads"; |
| compatible = "fsl,mpc5121ads"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| aliases { |
| pci = &pci; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| PowerPC,5121@0 { |
| device_type = "cpu"; |
| reg = <0>; |
| d-cache-line-size = <0x20>; // 32 bytes |
| i-cache-line-size = <0x20>; // 32 bytes |
| d-cache-size = <0x8000>; // L1, 32K |
| i-cache-size = <0x8000>; // L1, 32K |
| timebase-frequency = <49500000>;// 49.5 MHz (csb/4) |
| bus-frequency = <198000000>; // 198 MHz csb bus |
| clock-frequency = <396000000>; // 396 MHz ppc core |
| }; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| reg = <0x00000000 0x10000000>; // 256MB at 0 |
| }; |
| |
| mbx@20000000 { |
| compatible = "fsl,mpc5121-mbx"; |
| reg = <0x20000000 0x4000>; |
| interrupts = <66 0x8>; |
| interrupt-parent = < &ipic >; |
| }; |
| |
| sram@30000000 { |
| compatible = "fsl,mpc5121-sram"; |
| reg = <0x30000000 0x20000>; // 128K at 0x30000000 |
| }; |
| |
| nfc@40000000 { |
| compatible = "fsl,mpc5121-nfc"; |
| reg = <0x40000000 0x100000>; // 1M at 0x40000000 |
| interrupts = <6 8>; |
| interrupt-parent = < &ipic >; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| // ADS has two Hynix 512MB Nand flash chips in a single |
| // stacked package. |
| chips = <2>; |
| nand@0 { |
| label = "nand"; |
| reg = <0x00000000 0x40000000>; // 512MB + 512MB |
| }; |
| }; |
| |
| localbus@80000020 { |
| compatible = "fsl,mpc5121-localbus"; |
| #address-cells = <2>; |
| #size-cells = <1>; |
| reg = <0x80000020 0x40>; |
| |
| ranges = <0x0 0x0 0xfc000000 0x04000000 |
| 0x2 0x0 0x82000000 0x00008000>; |
| |
| flash@0,0 { |
| compatible = "cfi-flash"; |
| reg = <0 0x0 0x4000000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| bank-width = <4>; |
| device-width = <2>; |
| protected@0 { |
| label = "protected"; |
| reg = <0x00000000 0x00040000>; // first sector is protected |
| read-only; |
| }; |
| filesystem@40000 { |
| label = "filesystem"; |
| reg = <0x00040000 0x03c00000>; // 60M for filesystem |
| }; |
| kernel@3c40000 { |
| label = "kernel"; |
| reg = <0x03c40000 0x00280000>; // 2.5M for kernel |
| }; |
| device-tree@3ec0000 { |
| label = "device-tree"; |
| reg = <0x03ec0000 0x00040000>; // one sector for device tree |
| }; |
| u-boot@3f00000 { |
| label = "u-boot"; |
| reg = <0x03f00000 0x00100000>; // 1M for u-boot |
| read-only; |
| }; |
| }; |
| |
| board-control@2,0 { |
| compatible = "fsl,mpc5121ads-cpld"; |
| reg = <0x2 0x0 0x8000>; |
| }; |
| |
| cpld_pic: pic@2,a { |
| compatible = "fsl,mpc5121ads-cpld-pic"; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| reg = <0x2 0xa 0x5>; |
| interrupt-parent = < &ipic >; |
| // irq routing |
| // all irqs but touch screen are routed to irq0 (ipic 48) |
| // touch screen is statically routed to irq1 (ipic 17) |
| // so don't use it here |
| interrupts = <48 0x8>; |
| }; |
| }; |
| |
| soc@80000000 { |
| compatible = "fsl,mpc5121-immr"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| #interrupt-cells = <2>; |
| ranges = <0x0 0x80000000 0x400000>; |
| reg = <0x80000000 0x400000>; |
| bus-frequency = <66000000>; // 66 MHz ips bus |
| |
| |
| // IPIC |
| // interrupts cell = <intr #, sense> |
| // sense values match linux IORESOURCE_IRQ_* defines: |
| // sense == 8: Level, low assertion |
| // sense == 2: Edge, high-to-low change |
| // |
| ipic: interrupt-controller@c00 { |
| compatible = "fsl,mpc5121-ipic", "fsl,ipic"; |
| interrupt-controller; |
| #address-cells = <0>; |
| #interrupt-cells = <2>; |
| reg = <0xc00 0x100>; |
| }; |
| |
| rtc@a00 { // Real time clock |
| compatible = "fsl,mpc5121-rtc"; |
| reg = <0xa00 0x100>; |
| interrupts = <79 0x8 80 0x8>; |
| interrupt-parent = < &ipic >; |
| }; |
| |
| reset@e00 { // Reset module |
| compatible = "fsl,mpc5121-reset"; |
| reg = <0xe00 0x100>; |
| }; |
| |
| clock@f00 { // Clock control |
| compatible = "fsl,mpc5121-clock"; |
| reg = <0xf00 0x100>; |
| }; |
| |
| pmc@1000{ //Power Management Controller |
| compatible = "fsl,mpc5121-pmc"; |
| reg = <0x1000 0x100>; |
| interrupts = <83 0x2>; |
| interrupt-parent = < &ipic >; |
| }; |
| |
| gpio@1100 { |
| compatible = "fsl,mpc5121-gpio"; |
| reg = <0x1100 0x100>; |
| interrupts = <78 0x8>; |
| interrupt-parent = < &ipic >; |
| }; |
| |
| can@1300 { |
| compatible = "fsl,mpc5121-mscan"; |
| interrupts = <12 0x8>; |
| interrupt-parent = < &ipic >; |
| reg = <0x1300 0x80>; |
| }; |
| |
| can@1380 { |
| compatible = "fsl,mpc5121-mscan"; |
| interrupts = <13 0x8>; |
| interrupt-parent = < &ipic >; |
| reg = <0x1380 0x80>; |
| }; |
| |
| i2c@1700 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,mpc5121-i2c", "fsl-i2c"; |
| reg = <0x1700 0x20>; |
| interrupts = <9 0x8>; |
| interrupt-parent = < &ipic >; |
| fsl,preserve-clocking; |
| |
| hwmon@4a { |
| compatible = "adi,ad7414"; |
| reg = <0x4a>; |
| }; |
| |
| eeprom@50 { |
| compatible = "at,24c32"; |
| reg = <0x50>; |
| }; |
| |
| rtc@68 { |
| compatible = "stm,m41t62"; |
| reg = <0x68>; |
| }; |
| }; |
| |
| i2c@1720 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,mpc5121-i2c", "fsl-i2c"; |
| reg = <0x1720 0x20>; |
| interrupts = <10 0x8>; |
| interrupt-parent = < &ipic >; |
| }; |
| |
| i2c@1740 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,mpc5121-i2c", "fsl-i2c"; |
| reg = <0x1740 0x20>; |
| interrupts = <11 0x8>; |
| interrupt-parent = < &ipic >; |
| }; |
| |
| i2ccontrol@1760 { |
| compatible = "fsl,mpc5121-i2c-ctrl"; |
| reg = <0x1760 0x8>; |
| }; |
| |
| axe@2000 { |
| compatible = "fsl,mpc5121-axe"; |
| reg = <0x2000 0x100>; |
| interrupts = <42 0x8>; |
| interrupt-parent = < &ipic >; |
| }; |
| |
| display@2100 { |
| compatible = "fsl,mpc5121-diu"; |
| reg = <0x2100 0x100>; |
| interrupts = <64 0x8>; |
| interrupt-parent = < &ipic >; |
| }; |
| |
| mdio@2800 { |
| compatible = "fsl,mpc5121-fec-mdio"; |
| reg = <0x2800 0x800>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| phy: ethernet-phy@0 { |
| reg = <1>; |
| device_type = "ethernet-phy"; |
| }; |
| }; |
| |
| ethernet@2800 { |
| device_type = "network"; |
| compatible = "fsl,mpc5121-fec"; |
| reg = <0x2800 0x800>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| interrupts = <4 0x8>; |
| interrupt-parent = < &ipic >; |
| phy-handle = < &phy >; |
| fsl,align-tx-packets = <4>; |
| }; |
| |
| // 5121e has two dr usb modules |
| // mpc5121_ads only uses USB0 |
| |
| // USB1 using external ULPI PHY |
| //usb@3000 { |
| // compatible = "fsl,mpc5121-usb2-dr"; |
| // reg = <0x3000 0x1000>; |
| // #address-cells = <1>; |
| // #size-cells = <0>; |
| // interrupt-parent = < &ipic >; |
| // interrupts = <43 0x8>; |
| // dr_mode = "otg"; |
| // phy_type = "ulpi"; |
| //}; |
| |
| // USB0 using internal UTMI PHY |
| usb@4000 { |
| compatible = "fsl,mpc5121-usb2-dr"; |
| reg = <0x4000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupt-parent = < &ipic >; |
| interrupts = <44 0x8>; |
| dr_mode = "otg"; |
| phy_type = "utmi_wide"; |
| fsl,invert-drvvbus; |
| fsl,invert-pwr-fault; |
| }; |
| |
| // IO control |
| ioctl@a000 { |
| compatible = "fsl,mpc5121-ioctl"; |
| reg = <0xA000 0x1000>; |
| }; |
| |
| pata@10200 { |
| compatible = "fsl,mpc5121-pata"; |
| reg = <0x10200 0x100>; |
| interrupts = <5 0x8>; |
| interrupt-parent = < &ipic >; |
| }; |
| |
| // 512x PSCs are not 52xx PSC compatible |
| // PSC3 serial port A aka ttyPSC0 |
| serial@11300 { |
| device_type = "serial"; |
| compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; |
| // Logical port assignment needed until driver |
| // learns to use aliases |
| port-number = <0>; |
| cell-index = <3>; |
| reg = <0x11300 0x100>; |
| interrupts = <40 0x8>; |
| interrupt-parent = < &ipic >; |
| rx-fifo-size = <16>; |
| tx-fifo-size = <16>; |
| }; |
| |
| // PSC4 serial port B aka ttyPSC1 |
| serial@11400 { |
| device_type = "serial"; |
| compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; |
| // Logical port assignment needed until driver |
| // learns to use aliases |
| port-number = <1>; |
| cell-index = <4>; |
| reg = <0x11400 0x100>; |
| interrupts = <40 0x8>; |
| interrupt-parent = < &ipic >; |
| rx-fifo-size = <16>; |
| tx-fifo-size = <16>; |
| }; |
| |
| // PSC5 in ac97 mode |
| ac97@11500 { |
| compatible = "fsl,mpc5121-psc-ac97", "fsl,mpc5121-psc"; |
| cell-index = <5>; |
| reg = <0x11500 0x100>; |
| interrupts = <40 0x8>; |
| interrupt-parent = < &ipic >; |
| fsl,mode = "ac97-slave"; |
| rx-fifo-size = <384>; |
| tx-fifo-size = <384>; |
| }; |
| |
| pscfifo@11f00 { |
| compatible = "fsl,mpc5121-psc-fifo"; |
| reg = <0x11f00 0x100>; |
| interrupts = <40 0x8>; |
| interrupt-parent = < &ipic >; |
| }; |
| |
| dma@14000 { |
| compatible = "fsl,mpc5121-dma"; |
| reg = <0x14000 0x1800>; |
| interrupts = <65 0x8>; |
| interrupt-parent = < &ipic >; |
| }; |
| |
| }; |
| |
| pci: pci@80008500 { |
| interrupt-map-mask = <0xf800 0x0 0x0 0x7>; |
| interrupt-map = < |
| // IDSEL 0x15 - Slot 1 PCI |
| 0xa800 0x0 0x0 0x1 &cpld_pic 0x0 0x8 |
| 0xa800 0x0 0x0 0x2 &cpld_pic 0x1 0x8 |
| 0xa800 0x0 0x0 0x3 &cpld_pic 0x2 0x8 |
| 0xa800 0x0 0x0 0x4 &cpld_pic 0x3 0x8 |
| |
| // IDSEL 0x16 - Slot 2 MiniPCI |
| 0xb000 0x0 0x0 0x1 &cpld_pic 0x4 0x8 |
| 0xb000 0x0 0x0 0x2 &cpld_pic 0x5 0x8 |
| |
| // IDSEL 0x17 - Slot 3 MiniPCI |
| 0xb800 0x0 0x0 0x1 &cpld_pic 0x6 0x8 |
| 0xb800 0x0 0x0 0x2 &cpld_pic 0x7 0x8 |
| >; |
| interrupt-parent = < &ipic >; |
| interrupts = <1 0x8>; |
| bus-range = <0 0>; |
| ranges = <0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 |
| 0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000 |
| 0x01000000 0x0 0x00000000 0x84000000 0x0 0x01000000>; |
| clock-frequency = <0>; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| reg = <0x80008500 0x100 /* internal registers */ |
| 0x80008300 0x8>; /* config space access registers */ |
| compatible = "fsl,mpc5121-pci"; |
| device_type = "pci"; |
| }; |
| }; |
