| /* |
| * exynos4_tmu.h - Samsung EXYNOS4 TMU (Thermal Management Unit) |
| * |
| * Copyright (C) 2011 Samsung Electronics |
| * Donggeun Kim <dg77.kim@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #ifndef _LINUX_EXYNOS4_TMU_H |
| #define _LINUX_EXYNOS4_TMU_H |
| |
| enum calibration_type { |
| TYPE_ONE_POINT_TRIMMING, |
| TYPE_TWO_POINT_TRIMMING, |
| TYPE_NONE, |
| }; |
| |
| /** |
| * struct exynos4_tmu_platform_data |
| * @threshold: basic temperature for generating interrupt |
| * 25 <= threshold <= 125 [unit: degree Celsius] |
| * @trigger_levels: array for each interrupt levels |
| * [unit: degree Celsius] |
| * 0: temperature for trigger_level0 interrupt |
| * condition for trigger_level0 interrupt: |
| * current temperature > threshold + trigger_levels[0] |
| * 1: temperature for trigger_level1 interrupt |
| * condition for trigger_level1 interrupt: |
| * current temperature > threshold + trigger_levels[1] |
| * 2: temperature for trigger_level2 interrupt |
| * condition for trigger_level2 interrupt: |
| * current temperature > threshold + trigger_levels[2] |
| * 3: temperature for trigger_level3 interrupt |
| * condition for trigger_level3 interrupt: |
| * current temperature > threshold + trigger_levels[3] |
| * @trigger_level0_en: |
| * 1 = enable trigger_level0 interrupt, |
| * 0 = disable trigger_level0 interrupt |
| * @trigger_level1_en: |
| * 1 = enable trigger_level1 interrupt, |
| * 0 = disable trigger_level1 interrupt |
| * @trigger_level2_en: |
| * 1 = enable trigger_level2 interrupt, |
| * 0 = disable trigger_level2 interrupt |
| * @trigger_level3_en: |
| * 1 = enable trigger_level3 interrupt, |
| * 0 = disable trigger_level3 interrupt |
| * @gain: gain of amplifier in the positive-TC generator block |
| * 0 <= gain <= 15 |
| * @reference_voltage: reference voltage of amplifier |
| * in the positive-TC generator block |
| * 0 <= reference_voltage <= 31 |
| * @cal_type: calibration type for temperature |
| * |
| * This structure is required for configuration of exynos4_tmu driver. |
| */ |
| struct exynos4_tmu_platform_data { |
| u8 threshold; |
| u8 trigger_levels[4]; |
| bool trigger_level0_en; |
| bool trigger_level1_en; |
| bool trigger_level2_en; |
| bool trigger_level3_en; |
| |
| u8 gain; |
| u8 reference_voltage; |
| |
| enum calibration_type cal_type; |
| }; |
| #endif /* _LINUX_EXYNOS4_TMU_H */ |
