| /* |
| * OHCI HCD (Host Controller Driver) for USB. |
| * |
| * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> |
| * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net> |
| * (C) Copyright 2002 Hewlett-Packard Company |
| * |
| * Bus Glue for AMD Alchemy Au1xxx |
| * |
| * Written by Christopher Hoover <ch@hpl.hp.com> |
| * Based on fragments of previous driver by Russell King et al. |
| * |
| * Modified for LH7A404 from ohci-sa1111.c |
| * by Durgesh Pattamatta <pattamattad@sharpsec.com> |
| * Modified for AMD Alchemy Au1xxx |
| * by Matt Porter <mporter@kernel.crashing.org> |
| * |
| * This file is licenced under the GPL. |
| */ |
| |
| #include <linux/platform_device.h> |
| #include <linux/signal.h> |
| |
| #include <asm/mach-au1x00/au1000.h> |
| |
| |
| extern int usb_disabled(void); |
| |
| static int __devinit ohci_au1xxx_start(struct usb_hcd *hcd) |
| { |
| struct ohci_hcd *ohci = hcd_to_ohci(hcd); |
| int ret; |
| |
| ohci_dbg(ohci, "ohci_au1xxx_start, ohci:%p", ohci); |
| |
| if ((ret = ohci_init(ohci)) < 0) |
| return ret; |
| |
| if ((ret = ohci_run(ohci)) < 0) { |
| err ("can't start %s", hcd->self.bus_name); |
| ohci_stop(hcd); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static const struct hc_driver ohci_au1xxx_hc_driver = { |
| .description = hcd_name, |
| .product_desc = "Au1xxx OHCI", |
| .hcd_priv_size = sizeof(struct ohci_hcd), |
| |
| /* |
| * generic hardware linkage |
| */ |
| .irq = ohci_irq, |
| .flags = HCD_USB11 | HCD_MEMORY, |
| |
| /* |
| * basic lifecycle operations |
| */ |
| .start = ohci_au1xxx_start, |
| .stop = ohci_stop, |
| .shutdown = ohci_shutdown, |
| |
| /* |
| * managing i/o requests and associated device resources |
| */ |
| .urb_enqueue = ohci_urb_enqueue, |
| .urb_dequeue = ohci_urb_dequeue, |
| .endpoint_disable = ohci_endpoint_disable, |
| |
| /* |
| * scheduling support |
| */ |
| .get_frame_number = ohci_get_frame, |
| |
| /* |
| * root hub support |
| */ |
| .hub_status_data = ohci_hub_status_data, |
| .hub_control = ohci_hub_control, |
| #ifdef CONFIG_PM |
| .bus_suspend = ohci_bus_suspend, |
| .bus_resume = ohci_bus_resume, |
| #endif |
| .start_port_reset = ohci_start_port_reset, |
| }; |
| |
| static int ohci_hcd_au1xxx_drv_probe(struct platform_device *pdev) |
| { |
| int ret; |
| struct usb_hcd *hcd; |
| |
| if (usb_disabled()) |
| return -ENODEV; |
| |
| if (pdev->resource[1].flags != IORESOURCE_IRQ) { |
| pr_debug("resource[1] is not IORESOURCE_IRQ\n"); |
| return -ENOMEM; |
| } |
| |
| hcd = usb_create_hcd(&ohci_au1xxx_hc_driver, &pdev->dev, "au1xxx"); |
| if (!hcd) |
| return -ENOMEM; |
| |
| hcd->rsrc_start = pdev->resource[0].start; |
| hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1; |
| |
| if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { |
| pr_debug("request_mem_region failed\n"); |
| ret = -EBUSY; |
| goto err1; |
| } |
| |
| hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); |
| if (!hcd->regs) { |
| pr_debug("ioremap failed\n"); |
| ret = -ENOMEM; |
| goto err2; |
| } |
| |
| if (alchemy_usb_control(ALCHEMY_USB_OHCI0, 1)) { |
| printk(KERN_INFO "%s: controller init failed!\n", pdev->name); |
| ret = -ENODEV; |
| goto err3; |
| } |
| |
| ohci_hcd_init(hcd_to_ohci(hcd)); |
| |
| ret = usb_add_hcd(hcd, pdev->resource[1].start, |
| IRQF_SHARED); |
| if (ret == 0) { |
| platform_set_drvdata(pdev, hcd); |
| return ret; |
| } |
| |
| alchemy_usb_control(ALCHEMY_USB_OHCI0, 0); |
| err3: |
| iounmap(hcd->regs); |
| err2: |
| release_mem_region(hcd->rsrc_start, hcd->rsrc_len); |
| err1: |
| usb_put_hcd(hcd); |
| return ret; |
| } |
| |
| static int ohci_hcd_au1xxx_drv_remove(struct platform_device *pdev) |
| { |
| struct usb_hcd *hcd = platform_get_drvdata(pdev); |
| |
| usb_remove_hcd(hcd); |
| alchemy_usb_control(ALCHEMY_USB_OHCI0, 0); |
| iounmap(hcd->regs); |
| release_mem_region(hcd->rsrc_start, hcd->rsrc_len); |
| usb_put_hcd(hcd); |
| platform_set_drvdata(pdev, NULL); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int ohci_hcd_au1xxx_drv_suspend(struct device *dev) |
| { |
| struct usb_hcd *hcd = dev_get_drvdata(dev); |
| struct ohci_hcd *ohci = hcd_to_ohci(hcd); |
| unsigned long flags; |
| int rc; |
| |
| rc = 0; |
| |
| /* Root hub was already suspended. Disable irq emission and |
| * mark HW unaccessible, bail out if RH has been resumed. Use |
| * the spinlock to properly synchronize with possible pending |
| * RH suspend or resume activity. |
| * |
| * This is still racy as hcd->state is manipulated outside of |
| * any locks =P But that will be a different fix. |
| */ |
| spin_lock_irqsave(&ohci->lock, flags); |
| if (hcd->state != HC_STATE_SUSPENDED) { |
| rc = -EINVAL; |
| goto bail; |
| } |
| ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable); |
| (void)ohci_readl(ohci, &ohci->regs->intrdisable); |
| |
| clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); |
| |
| alchemy_usb_control(ALCHEMY_USB_OHCI0, 0); |
| bail: |
| spin_unlock_irqrestore(&ohci->lock, flags); |
| |
| return rc; |
| } |
| |
| static int ohci_hcd_au1xxx_drv_resume(struct device *dev) |
| { |
| struct usb_hcd *hcd = dev_get_drvdata(dev); |
| |
| alchemy_usb_control(ALCHEMY_USB_OHCI0, 1); |
| |
| set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); |
| ohci_finish_controller_resume(hcd); |
| |
| return 0; |
| } |
| |
| static const struct dev_pm_ops au1xxx_ohci_pmops = { |
| .suspend = ohci_hcd_au1xxx_drv_suspend, |
| .resume = ohci_hcd_au1xxx_drv_resume, |
| }; |
| |
| #define AU1XXX_OHCI_PMOPS &au1xxx_ohci_pmops |
| |
| #else |
| #define AU1XXX_OHCI_PMOPS NULL |
| #endif |
| |
| static struct platform_driver ohci_hcd_au1xxx_driver = { |
| .probe = ohci_hcd_au1xxx_drv_probe, |
| .remove = ohci_hcd_au1xxx_drv_remove, |
| .shutdown = usb_hcd_platform_shutdown, |
| .driver = { |
| .name = "au1xxx-ohci", |
| .owner = THIS_MODULE, |
| .pm = AU1XXX_OHCI_PMOPS, |
| }, |
| }; |
| |
| MODULE_ALIAS("platform:au1xxx-ohci"); |