| /* |
| * Driver for EHCI UHP on Atmel chips |
| * |
| * Copyright (C) 2009 Atmel Corporation, |
| * Nicolas Ferre <nicolas.ferre@atmel.com> |
| * |
| * Based on various ehci-*.c drivers |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file COPYING in the main directory of this archive for |
| * more details. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/platform_device.h> |
| |
| /* interface and function clocks */ |
| static struct clk *iclk, *fclk; |
| static int clocked; |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static void atmel_start_clock(void) |
| { |
| clk_enable(iclk); |
| clk_enable(fclk); |
| clocked = 1; |
| } |
| |
| static void atmel_stop_clock(void) |
| { |
| clk_disable(fclk); |
| clk_disable(iclk); |
| clocked = 0; |
| } |
| |
| static void atmel_start_ehci(struct platform_device *pdev) |
| { |
| dev_dbg(&pdev->dev, "start\n"); |
| atmel_start_clock(); |
| } |
| |
| static void atmel_stop_ehci(struct platform_device *pdev) |
| { |
| dev_dbg(&pdev->dev, "stop\n"); |
| atmel_stop_clock(); |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static int ehci_atmel_setup(struct usb_hcd *hcd) |
| { |
| struct ehci_hcd *ehci = hcd_to_ehci(hcd); |
| int retval = 0; |
| |
| /* registers start at offset 0x0 */ |
| ehci->caps = hcd->regs; |
| ehci->regs = hcd->regs + |
| HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase)); |
| dbg_hcs_params(ehci, "reset"); |
| dbg_hcc_params(ehci, "reset"); |
| |
| /* cache this readonly data; minimize chip reads */ |
| ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); |
| |
| retval = ehci_halt(ehci); |
| if (retval) |
| return retval; |
| |
| /* data structure init */ |
| retval = ehci_init(hcd); |
| if (retval) |
| return retval; |
| |
| ehci->sbrn = 0x20; |
| |
| ehci_reset(ehci); |
| ehci_port_power(ehci, 0); |
| |
| return retval; |
| } |
| |
| static const struct hc_driver ehci_atmel_hc_driver = { |
| .description = hcd_name, |
| .product_desc = "Atmel EHCI UHP HS", |
| .hcd_priv_size = sizeof(struct ehci_hcd), |
| |
| /* generic hardware linkage */ |
| .irq = ehci_irq, |
| .flags = HCD_MEMORY | HCD_USB2, |
| |
| /* basic lifecycle operations */ |
| .reset = ehci_atmel_setup, |
| .start = ehci_run, |
| .stop = ehci_stop, |
| .shutdown = ehci_shutdown, |
| |
| /* managing i/o requests and associated device resources */ |
| .urb_enqueue = ehci_urb_enqueue, |
| .urb_dequeue = ehci_urb_dequeue, |
| .endpoint_disable = ehci_endpoint_disable, |
| .endpoint_reset = ehci_endpoint_reset, |
| |
| /* scheduling support */ |
| .get_frame_number = ehci_get_frame, |
| |
| /* root hub support */ |
| .hub_status_data = ehci_hub_status_data, |
| .hub_control = ehci_hub_control, |
| .bus_suspend = ehci_bus_suspend, |
| .bus_resume = ehci_bus_resume, |
| .relinquish_port = ehci_relinquish_port, |
| .port_handed_over = ehci_port_handed_over, |
| |
| .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, |
| }; |
| |
| static int __devinit ehci_atmel_drv_probe(struct platform_device *pdev) |
| { |
| struct usb_hcd *hcd; |
| const struct hc_driver *driver = &ehci_atmel_hc_driver; |
| struct resource *res; |
| int irq; |
| int retval; |
| |
| if (usb_disabled()) |
| return -ENODEV; |
| |
| pr_debug("Initializing Atmel-SoC USB Host Controller\n"); |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq <= 0) { |
| dev_err(&pdev->dev, |
| "Found HC with no IRQ. Check %s setup!\n", |
| dev_name(&pdev->dev)); |
| retval = -ENODEV; |
| goto fail_create_hcd; |
| } |
| |
| hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); |
| if (!hcd) { |
| retval = -ENOMEM; |
| goto fail_create_hcd; |
| } |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) { |
| dev_err(&pdev->dev, |
| "Found HC with no register addr. Check %s setup!\n", |
| dev_name(&pdev->dev)); |
| retval = -ENODEV; |
| goto fail_request_resource; |
| } |
| hcd->rsrc_start = res->start; |
| hcd->rsrc_len = resource_size(res); |
| |
| if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, |
| driver->description)) { |
| dev_dbg(&pdev->dev, "controller already in use\n"); |
| retval = -EBUSY; |
| goto fail_request_resource; |
| } |
| |
| hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); |
| if (hcd->regs == NULL) { |
| dev_dbg(&pdev->dev, "error mapping memory\n"); |
| retval = -EFAULT; |
| goto fail_ioremap; |
| } |
| |
| iclk = clk_get(&pdev->dev, "ehci_clk"); |
| if (IS_ERR(iclk)) { |
| dev_err(&pdev->dev, "Error getting interface clock\n"); |
| retval = -ENOENT; |
| goto fail_get_iclk; |
| } |
| fclk = clk_get(&pdev->dev, "uhpck"); |
| if (IS_ERR(fclk)) { |
| dev_err(&pdev->dev, "Error getting function clock\n"); |
| retval = -ENOENT; |
| goto fail_get_fclk; |
| } |
| |
| atmel_start_ehci(pdev); |
| |
| retval = usb_add_hcd(hcd, irq, IRQF_SHARED); |
| if (retval) |
| goto fail_add_hcd; |
| |
| return retval; |
| |
| fail_add_hcd: |
| atmel_stop_ehci(pdev); |
| clk_put(fclk); |
| fail_get_fclk: |
| clk_put(iclk); |
| fail_get_iclk: |
| iounmap(hcd->regs); |
| fail_ioremap: |
| release_mem_region(hcd->rsrc_start, hcd->rsrc_len); |
| fail_request_resource: |
| usb_put_hcd(hcd); |
| fail_create_hcd: |
| dev_err(&pdev->dev, "init %s fail, %d\n", |
| dev_name(&pdev->dev), retval); |
| |
| return retval; |
| } |
| |
| static int __devexit ehci_atmel_drv_remove(struct platform_device *pdev) |
| { |
| struct usb_hcd *hcd = platform_get_drvdata(pdev); |
| |
| ehci_shutdown(hcd); |
| usb_remove_hcd(hcd); |
| iounmap(hcd->regs); |
| release_mem_region(hcd->rsrc_start, hcd->rsrc_len); |
| usb_put_hcd(hcd); |
| |
| atmel_stop_ehci(pdev); |
| clk_put(fclk); |
| clk_put(iclk); |
| fclk = iclk = NULL; |
| |
| return 0; |
| } |
| |
| static struct platform_driver ehci_atmel_driver = { |
| .probe = ehci_atmel_drv_probe, |
| .remove = __devexit_p(ehci_atmel_drv_remove), |
| .shutdown = usb_hcd_platform_shutdown, |
| .driver.name = "atmel-ehci", |
| }; |