| /* |
| * Sonics Silicon Backplane |
| * Broadcom Gigabit Ethernet core driver |
| * |
| * Copyright 2008, Broadcom Corporation |
| * Copyright 2008, Michael Buesch <m@bues.ch> |
| * |
| * Licensed under the GNU/GPL. See COPYING for details. |
| */ |
| |
| #include <linux/ssb/ssb.h> |
| #include <linux/ssb/ssb_driver_gige.h> |
| #include <linux/export.h> |
| #include <linux/pci.h> |
| #include <linux/pci_regs.h> |
| #include <linux/slab.h> |
| |
| |
| /* |
| MODULE_DESCRIPTION("SSB Broadcom Gigabit Ethernet driver"); |
| MODULE_AUTHOR("Michael Buesch"); |
| MODULE_LICENSE("GPL"); |
| */ |
| |
| static const struct ssb_device_id ssb_gige_tbl[] = { |
| SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_ETHERNET_GBIT, SSB_ANY_REV), |
| SSB_DEVTABLE_END |
| }; |
| /* MODULE_DEVICE_TABLE(ssb, ssb_gige_tbl); */ |
| |
| |
| static inline u8 gige_read8(struct ssb_gige *dev, u16 offset) |
| { |
| return ssb_read8(dev->dev, offset); |
| } |
| |
| static inline u16 gige_read16(struct ssb_gige *dev, u16 offset) |
| { |
| return ssb_read16(dev->dev, offset); |
| } |
| |
| static inline u32 gige_read32(struct ssb_gige *dev, u16 offset) |
| { |
| return ssb_read32(dev->dev, offset); |
| } |
| |
| static inline void gige_write8(struct ssb_gige *dev, |
| u16 offset, u8 value) |
| { |
| ssb_write8(dev->dev, offset, value); |
| } |
| |
| static inline void gige_write16(struct ssb_gige *dev, |
| u16 offset, u16 value) |
| { |
| ssb_write16(dev->dev, offset, value); |
| } |
| |
| static inline void gige_write32(struct ssb_gige *dev, |
| u16 offset, u32 value) |
| { |
| ssb_write32(dev->dev, offset, value); |
| } |
| |
| static inline |
| u8 gige_pcicfg_read8(struct ssb_gige *dev, unsigned int offset) |
| { |
| BUG_ON(offset >= 256); |
| return gige_read8(dev, SSB_GIGE_PCICFG + offset); |
| } |
| |
| static inline |
| u16 gige_pcicfg_read16(struct ssb_gige *dev, unsigned int offset) |
| { |
| BUG_ON(offset >= 256); |
| return gige_read16(dev, SSB_GIGE_PCICFG + offset); |
| } |
| |
| static inline |
| u32 gige_pcicfg_read32(struct ssb_gige *dev, unsigned int offset) |
| { |
| BUG_ON(offset >= 256); |
| return gige_read32(dev, SSB_GIGE_PCICFG + offset); |
| } |
| |
| static inline |
| void gige_pcicfg_write8(struct ssb_gige *dev, |
| unsigned int offset, u8 value) |
| { |
| BUG_ON(offset >= 256); |
| gige_write8(dev, SSB_GIGE_PCICFG + offset, value); |
| } |
| |
| static inline |
| void gige_pcicfg_write16(struct ssb_gige *dev, |
| unsigned int offset, u16 value) |
| { |
| BUG_ON(offset >= 256); |
| gige_write16(dev, SSB_GIGE_PCICFG + offset, value); |
| } |
| |
| static inline |
| void gige_pcicfg_write32(struct ssb_gige *dev, |
| unsigned int offset, u32 value) |
| { |
| BUG_ON(offset >= 256); |
| gige_write32(dev, SSB_GIGE_PCICFG + offset, value); |
| } |
| |
| static int __devinit ssb_gige_pci_read_config(struct pci_bus *bus, |
| unsigned int devfn, int reg, |
| int size, u32 *val) |
| { |
| struct ssb_gige *dev = container_of(bus->ops, struct ssb_gige, pci_ops); |
| unsigned long flags; |
| |
| if ((PCI_SLOT(devfn) > 0) || (PCI_FUNC(devfn) > 0)) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| if (reg >= 256) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| spin_lock_irqsave(&dev->lock, flags); |
| switch (size) { |
| case 1: |
| *val = gige_pcicfg_read8(dev, reg); |
| break; |
| case 2: |
| *val = gige_pcicfg_read16(dev, reg); |
| break; |
| case 4: |
| *val = gige_pcicfg_read32(dev, reg); |
| break; |
| default: |
| WARN_ON(1); |
| } |
| spin_unlock_irqrestore(&dev->lock, flags); |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static int __devinit ssb_gige_pci_write_config(struct pci_bus *bus, |
| unsigned int devfn, int reg, |
| int size, u32 val) |
| { |
| struct ssb_gige *dev = container_of(bus->ops, struct ssb_gige, pci_ops); |
| unsigned long flags; |
| |
| if ((PCI_SLOT(devfn) > 0) || (PCI_FUNC(devfn) > 0)) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| if (reg >= 256) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| spin_lock_irqsave(&dev->lock, flags); |
| switch (size) { |
| case 1: |
| gige_pcicfg_write8(dev, reg, val); |
| break; |
| case 2: |
| gige_pcicfg_write16(dev, reg, val); |
| break; |
| case 4: |
| gige_pcicfg_write32(dev, reg, val); |
| break; |
| default: |
| WARN_ON(1); |
| } |
| spin_unlock_irqrestore(&dev->lock, flags); |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static int __devinit ssb_gige_probe(struct ssb_device *sdev, |
| const struct ssb_device_id *id) |
| { |
| struct ssb_gige *dev; |
| u32 base, tmslow, tmshigh; |
| |
| dev = kzalloc(sizeof(*dev), GFP_KERNEL); |
| if (!dev) |
| return -ENOMEM; |
| dev->dev = sdev; |
| |
| spin_lock_init(&dev->lock); |
| dev->pci_controller.pci_ops = &dev->pci_ops; |
| dev->pci_controller.io_resource = &dev->io_resource; |
| dev->pci_controller.mem_resource = &dev->mem_resource; |
| dev->pci_controller.io_map_base = 0x800; |
| dev->pci_ops.read = ssb_gige_pci_read_config; |
| dev->pci_ops.write = ssb_gige_pci_write_config; |
| |
| dev->io_resource.name = SSB_GIGE_IO_RES_NAME; |
| dev->io_resource.start = 0x800; |
| dev->io_resource.end = 0x8FF; |
| dev->io_resource.flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED; |
| |
| if (!ssb_device_is_enabled(sdev)) |
| ssb_device_enable(sdev, 0); |
| |
| /* Setup BAR0. This is a 64k MMIO region. */ |
| base = ssb_admatch_base(ssb_read32(sdev, SSB_ADMATCH1)); |
| gige_pcicfg_write32(dev, PCI_BASE_ADDRESS_0, base); |
| gige_pcicfg_write32(dev, PCI_BASE_ADDRESS_1, 0); |
| |
| dev->mem_resource.name = SSB_GIGE_MEM_RES_NAME; |
| dev->mem_resource.start = base; |
| dev->mem_resource.end = base + 0x10000 - 1; |
| dev->mem_resource.flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED; |
| |
| /* Enable the memory region. */ |
| gige_pcicfg_write16(dev, PCI_COMMAND, |
| gige_pcicfg_read16(dev, PCI_COMMAND) |
| | PCI_COMMAND_MEMORY); |
| |
| /* Write flushing is controlled by the Flush Status Control register. |
| * We want to flush every register write with a timeout and we want |
| * to disable the IRQ mask while flushing to avoid concurrency. |
| * Note that automatic write flushing does _not_ work from |
| * an IRQ handler. The driver must flush manually by reading a register. |
| */ |
| gige_write32(dev, SSB_GIGE_SHIM_FLUSHSTAT, 0x00000068); |
| |
| /* Check if we have an RGMII or GMII PHY-bus. |
| * On RGMII do not bypass the DLLs */ |
| tmslow = ssb_read32(sdev, SSB_TMSLOW); |
| tmshigh = ssb_read32(sdev, SSB_TMSHIGH); |
| if (tmshigh & SSB_GIGE_TMSHIGH_RGMII) { |
| tmslow &= ~SSB_GIGE_TMSLOW_TXBYPASS; |
| tmslow &= ~SSB_GIGE_TMSLOW_RXBYPASS; |
| dev->has_rgmii = 1; |
| } else { |
| tmslow |= SSB_GIGE_TMSLOW_TXBYPASS; |
| tmslow |= SSB_GIGE_TMSLOW_RXBYPASS; |
| dev->has_rgmii = 0; |
| } |
| tmslow |= SSB_GIGE_TMSLOW_DLLEN; |
| ssb_write32(sdev, SSB_TMSLOW, tmslow); |
| |
| ssb_set_drvdata(sdev, dev); |
| register_pci_controller(&dev->pci_controller); |
| |
| return 0; |
| } |
| |
| bool pdev_is_ssb_gige_core(struct pci_dev *pdev) |
| { |
| if (!pdev->resource[0].name) |
| return 0; |
| return (strcmp(pdev->resource[0].name, SSB_GIGE_MEM_RES_NAME) == 0); |
| } |
| EXPORT_SYMBOL(pdev_is_ssb_gige_core); |
| |
| int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev, |
| struct pci_dev *pdev) |
| { |
| struct ssb_gige *dev = ssb_get_drvdata(sdev); |
| struct resource *res; |
| |
| if (pdev->bus->ops != &dev->pci_ops) { |
| /* The PCI device is not on this SSB GigE bridge device. */ |
| return -ENODEV; |
| } |
| |
| /* Fixup the PCI resources. */ |
| res = &(pdev->resource[0]); |
| res->flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED; |
| res->name = dev->mem_resource.name; |
| res->start = dev->mem_resource.start; |
| res->end = dev->mem_resource.end; |
| |
| /* Fixup interrupt lines. */ |
| pdev->irq = ssb_mips_irq(sdev) + 2; |
| pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, pdev->irq); |
| |
| return 0; |
| } |
| |
| int ssb_gige_map_irq(struct ssb_device *sdev, |
| const struct pci_dev *pdev) |
| { |
| struct ssb_gige *dev = ssb_get_drvdata(sdev); |
| |
| if (pdev->bus->ops != &dev->pci_ops) { |
| /* The PCI device is not on this SSB GigE bridge device. */ |
| return -ENODEV; |
| } |
| |
| return ssb_mips_irq(sdev) + 2; |
| } |
| |
| static struct ssb_driver ssb_gige_driver = { |
| .name = "BCM-GigE", |
| .id_table = ssb_gige_tbl, |
| .probe = ssb_gige_probe, |
| }; |
| |
| int ssb_gige_init(void) |
| { |
| return ssb_driver_register(&ssb_gige_driver); |
| } |