| /* |
| * ngene-cards.c: nGene PCIe bridge driver - card specific info |
| * |
| * Copyright (C) 2005-2007 Micronas |
| * |
| * Copyright (C) 2008-2009 Ralph Metzler <rjkm@metzlerbros.de> |
| * Modifications for new nGene firmware, |
| * support for EEPROM-copying, |
| * support for new dual DVB-S2 card prototype |
| * |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 only, as published by the Free Software Foundation. |
| * |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA |
| * 02110-1301, USA |
| * Or, point your browser to http://www.gnu.org/copyleft/gpl.html |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/pci.h> |
| #include <linux/pci_ids.h> |
| |
| #include "ngene.h" |
| |
| /* demods/tuners */ |
| #include "stv6110x.h" |
| #include "stv090x.h" |
| #include "lnbh24.h" |
| #include "lgdt330x.h" |
| #include "mt2131.h" |
| #include "tda18271c2dd.h" |
| #include "drxk.h" |
| |
| |
| /****************************************************************************/ |
| /* Demod/tuner attachment ***************************************************/ |
| /****************************************************************************/ |
| |
| static int tuner_attach_stv6110(struct ngene_channel *chan) |
| { |
| struct i2c_adapter *i2c; |
| struct stv090x_config *feconf = (struct stv090x_config *) |
| chan->dev->card_info->fe_config[chan->number]; |
| struct stv6110x_config *tunerconf = (struct stv6110x_config *) |
| chan->dev->card_info->tuner_config[chan->number]; |
| struct stv6110x_devctl *ctl; |
| |
| /* tuner 1+2: i2c adapter #0, tuner 3+4: i2c adapter #1 */ |
| if (chan->number < 2) |
| i2c = &chan->dev->channel[0].i2c_adapter; |
| else |
| i2c = &chan->dev->channel[1].i2c_adapter; |
| |
| ctl = dvb_attach(stv6110x_attach, chan->fe, tunerconf, i2c); |
| if (ctl == NULL) { |
| printk(KERN_ERR DEVICE_NAME ": No STV6110X found!\n"); |
| return -ENODEV; |
| } |
| |
| feconf->tuner_init = ctl->tuner_init; |
| feconf->tuner_sleep = ctl->tuner_sleep; |
| feconf->tuner_set_mode = ctl->tuner_set_mode; |
| feconf->tuner_set_frequency = ctl->tuner_set_frequency; |
| feconf->tuner_get_frequency = ctl->tuner_get_frequency; |
| feconf->tuner_set_bandwidth = ctl->tuner_set_bandwidth; |
| feconf->tuner_get_bandwidth = ctl->tuner_get_bandwidth; |
| feconf->tuner_set_bbgain = ctl->tuner_set_bbgain; |
| feconf->tuner_get_bbgain = ctl->tuner_get_bbgain; |
| feconf->tuner_set_refclk = ctl->tuner_set_refclk; |
| feconf->tuner_get_status = ctl->tuner_get_status; |
| |
| return 0; |
| } |
| |
| |
| static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable) |
| { |
| struct ngene_channel *chan = fe->sec_priv; |
| int status; |
| |
| if (enable) { |
| down(&chan->dev->pll_mutex); |
| status = chan->gate_ctrl(fe, 1); |
| } else { |
| status = chan->gate_ctrl(fe, 0); |
| up(&chan->dev->pll_mutex); |
| } |
| return status; |
| } |
| |
| static int tuner_attach_tda18271(struct ngene_channel *chan) |
| { |
| struct i2c_adapter *i2c; |
| struct dvb_frontend *fe; |
| |
| i2c = &chan->dev->channel[0].i2c_adapter; |
| if (chan->fe->ops.i2c_gate_ctrl) |
| chan->fe->ops.i2c_gate_ctrl(chan->fe, 1); |
| fe = dvb_attach(tda18271c2dd_attach, chan->fe, i2c, 0x60); |
| if (chan->fe->ops.i2c_gate_ctrl) |
| chan->fe->ops.i2c_gate_ctrl(chan->fe, 0); |
| if (!fe) { |
| printk(KERN_ERR "No TDA18271 found!\n"); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| static int tuner_attach_probe(struct ngene_channel *chan) |
| { |
| if (chan->demod_type == 0) |
| return tuner_attach_stv6110(chan); |
| if (chan->demod_type == 1) |
| return tuner_attach_tda18271(chan); |
| return -EINVAL; |
| } |
| |
| static int demod_attach_stv0900(struct ngene_channel *chan) |
| { |
| struct i2c_adapter *i2c; |
| struct stv090x_config *feconf = (struct stv090x_config *) |
| chan->dev->card_info->fe_config[chan->number]; |
| |
| /* tuner 1+2: i2c adapter #0, tuner 3+4: i2c adapter #1 */ |
| /* Note: Both adapters share the same i2c bus, but the demod */ |
| /* driver requires that each demod has its own i2c adapter */ |
| if (chan->number < 2) |
| i2c = &chan->dev->channel[0].i2c_adapter; |
| else |
| i2c = &chan->dev->channel[1].i2c_adapter; |
| |
| chan->fe = dvb_attach(stv090x_attach, feconf, i2c, |
| (chan->number & 1) == 0 ? STV090x_DEMODULATOR_0 |
| : STV090x_DEMODULATOR_1); |
| if (chan->fe == NULL) { |
| printk(KERN_ERR DEVICE_NAME ": No STV0900 found!\n"); |
| return -ENODEV; |
| } |
| |
| /* store channel info */ |
| if (feconf->tuner_i2c_lock) |
| chan->fe->analog_demod_priv = chan; |
| |
| if (!dvb_attach(lnbh24_attach, chan->fe, i2c, 0, |
| 0, chan->dev->card_info->lnb[chan->number])) { |
| printk(KERN_ERR DEVICE_NAME ": No LNBH24 found!\n"); |
| dvb_frontend_detach(chan->fe); |
| chan->fe = NULL; |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| static void cineS2_tuner_i2c_lock(struct dvb_frontend *fe, int lock) |
| { |
| struct ngene_channel *chan = fe->analog_demod_priv; |
| |
| if (lock) |
| down(&chan->dev->pll_mutex); |
| else |
| up(&chan->dev->pll_mutex); |
| } |
| |
| static int i2c_read(struct i2c_adapter *adapter, u8 adr, u8 *val) |
| { |
| struct i2c_msg msgs[1] = {{.addr = adr, .flags = I2C_M_RD, |
| .buf = val, .len = 1 } }; |
| return (i2c_transfer(adapter, msgs, 1) == 1) ? 0 : -1; |
| } |
| |
| static int i2c_read_reg16(struct i2c_adapter *adapter, u8 adr, |
| u16 reg, u8 *val) |
| { |
| u8 msg[2] = {reg>>8, reg&0xff}; |
| struct i2c_msg msgs[2] = {{.addr = adr, .flags = 0, |
| .buf = msg, .len = 2}, |
| {.addr = adr, .flags = I2C_M_RD, |
| .buf = val, .len = 1} }; |
| return (i2c_transfer(adapter, msgs, 2) == 2) ? 0 : -1; |
| } |
| |
| static int port_has_stv0900(struct i2c_adapter *i2c, int port) |
| { |
| u8 val; |
| if (i2c_read_reg16(i2c, 0x68+port/2, 0xf100, &val) < 0) |
| return 0; |
| return 1; |
| } |
| |
| static int port_has_drxk(struct i2c_adapter *i2c, int port) |
| { |
| u8 val; |
| |
| if (i2c_read(i2c, 0x29+port, &val) < 0) |
| return 0; |
| return 1; |
| } |
| |
| static int demod_attach_drxk(struct ngene_channel *chan, |
| struct i2c_adapter *i2c) |
| { |
| struct drxk_config config; |
| |
| memset(&config, 0, sizeof(config)); |
| config.adr = 0x29 + (chan->number ^ 2); |
| |
| chan->fe = dvb_attach(drxk_attach, &config, i2c, &chan->fe2); |
| if (!chan->fe) { |
| printk(KERN_ERR "No DRXK found!\n"); |
| return -ENODEV; |
| } |
| chan->fe->sec_priv = chan; |
| chan->gate_ctrl = chan->fe->ops.i2c_gate_ctrl; |
| chan->fe->ops.i2c_gate_ctrl = drxk_gate_ctrl; |
| return 0; |
| } |
| |
| static int cineS2_probe(struct ngene_channel *chan) |
| { |
| struct i2c_adapter *i2c; |
| struct stv090x_config *fe_conf; |
| u8 buf[3]; |
| struct i2c_msg i2c_msg = { .flags = 0, .buf = buf }; |
| int rc; |
| |
| /* tuner 1+2: i2c adapter #0, tuner 3+4: i2c adapter #1 */ |
| if (chan->number < 2) |
| i2c = &chan->dev->channel[0].i2c_adapter; |
| else |
| i2c = &chan->dev->channel[1].i2c_adapter; |
| |
| if (port_has_stv0900(i2c, chan->number)) { |
| chan->demod_type = 0; |
| fe_conf = chan->dev->card_info->fe_config[chan->number]; |
| /* demod found, attach it */ |
| rc = demod_attach_stv0900(chan); |
| if (rc < 0 || chan->number < 2) |
| return rc; |
| |
| /* demod #2: reprogram outputs DPN1 & DPN2 */ |
| i2c_msg.addr = fe_conf->address; |
| i2c_msg.len = 3; |
| buf[0] = 0xf1; |
| switch (chan->number) { |
| case 2: |
| buf[1] = 0x5c; |
| buf[2] = 0xc2; |
| break; |
| case 3: |
| buf[1] = 0x61; |
| buf[2] = 0xcc; |
| break; |
| default: |
| return -ENODEV; |
| } |
| rc = i2c_transfer(i2c, &i2c_msg, 1); |
| if (rc != 1) { |
| printk(KERN_ERR DEVICE_NAME ": could not setup DPNx\n"); |
| return -EIO; |
| } |
| } else if (port_has_drxk(i2c, chan->number^2)) { |
| chan->demod_type = 1; |
| demod_attach_drxk(chan, i2c); |
| } else { |
| printk(KERN_ERR "No demod found on chan %d\n", chan->number); |
| return -ENODEV; |
| } |
| return 0; |
| } |
| |
| |
| static struct lgdt330x_config aver_m780 = { |
| .demod_address = 0xb2 >> 1, |
| .demod_chip = LGDT3303, |
| .serial_mpeg = 0x00, /* PARALLEL */ |
| .clock_polarity_flip = 1, |
| }; |
| |
| static struct mt2131_config m780_tunerconfig = { |
| 0xc0 >> 1 |
| }; |
| |
| /* A single func to attach the demo and tuner, rather than |
| * use two sep funcs like the current design mandates. |
| */ |
| static int demod_attach_lg330x(struct ngene_channel *chan) |
| { |
| chan->fe = dvb_attach(lgdt330x_attach, &aver_m780, &chan->i2c_adapter); |
| if (chan->fe == NULL) { |
| printk(KERN_ERR DEVICE_NAME ": No LGDT330x found!\n"); |
| return -ENODEV; |
| } |
| |
| dvb_attach(mt2131_attach, chan->fe, &chan->i2c_adapter, |
| &m780_tunerconfig, 0); |
| |
| return (chan->fe) ? 0 : -ENODEV; |
| } |
| |
| /****************************************************************************/ |
| /* Switch control (I2C gates, etc.) *****************************************/ |
| /****************************************************************************/ |
| |
| |
| static struct stv090x_config fe_cineS2 = { |
| .device = STV0900, |
| .demod_mode = STV090x_DUAL, |
| .clk_mode = STV090x_CLK_EXT, |
| |
| .xtal = 27000000, |
| .address = 0x68, |
| |
| .ts1_mode = STV090x_TSMODE_SERIAL_PUNCTURED, |
| .ts2_mode = STV090x_TSMODE_SERIAL_PUNCTURED, |
| |
| .repeater_level = STV090x_RPTLEVEL_16, |
| |
| .adc1_range = STV090x_ADC_1Vpp, |
| .adc2_range = STV090x_ADC_1Vpp, |
| |
| .diseqc_envelope_mode = true, |
| |
| .tuner_i2c_lock = cineS2_tuner_i2c_lock, |
| }; |
| |
| static struct stv090x_config fe_cineS2_2 = { |
| .device = STV0900, |
| .demod_mode = STV090x_DUAL, |
| .clk_mode = STV090x_CLK_EXT, |
| |
| .xtal = 27000000, |
| .address = 0x69, |
| |
| .ts1_mode = STV090x_TSMODE_SERIAL_PUNCTURED, |
| .ts2_mode = STV090x_TSMODE_SERIAL_PUNCTURED, |
| |
| .repeater_level = STV090x_RPTLEVEL_16, |
| |
| .adc1_range = STV090x_ADC_1Vpp, |
| .adc2_range = STV090x_ADC_1Vpp, |
| |
| .diseqc_envelope_mode = true, |
| |
| .tuner_i2c_lock = cineS2_tuner_i2c_lock, |
| }; |
| |
| static struct stv6110x_config tuner_cineS2_0 = { |
| .addr = 0x60, |
| .refclk = 27000000, |
| .clk_div = 1, |
| }; |
| |
| static struct stv6110x_config tuner_cineS2_1 = { |
| .addr = 0x63, |
| .refclk = 27000000, |
| .clk_div = 1, |
| }; |
| |
| static struct ngene_info ngene_info_cineS2 = { |
| .type = NGENE_SIDEWINDER, |
| .name = "Linux4Media cineS2 DVB-S2 Twin Tuner", |
| .io_type = {NGENE_IO_TSIN, NGENE_IO_TSIN}, |
| .demod_attach = {demod_attach_stv0900, demod_attach_stv0900}, |
| .tuner_attach = {tuner_attach_stv6110, tuner_attach_stv6110}, |
| .fe_config = {&fe_cineS2, &fe_cineS2}, |
| .tuner_config = {&tuner_cineS2_0, &tuner_cineS2_1}, |
| .lnb = {0x0b, 0x08}, |
| .tsf = {3, 3}, |
| .fw_version = 18, |
| .msi_supported = true, |
| }; |
| |
| static struct ngene_info ngene_info_satixS2 = { |
| .type = NGENE_SIDEWINDER, |
| .name = "Mystique SaTiX-S2 Dual", |
| .io_type = {NGENE_IO_TSIN, NGENE_IO_TSIN}, |
| .demod_attach = {demod_attach_stv0900, demod_attach_stv0900}, |
| .tuner_attach = {tuner_attach_stv6110, tuner_attach_stv6110}, |
| .fe_config = {&fe_cineS2, &fe_cineS2}, |
| .tuner_config = {&tuner_cineS2_0, &tuner_cineS2_1}, |
| .lnb = {0x0b, 0x08}, |
| .tsf = {3, 3}, |
| .fw_version = 18, |
| .msi_supported = true, |
| }; |
| |
| static struct ngene_info ngene_info_satixS2v2 = { |
| .type = NGENE_SIDEWINDER, |
| .name = "Mystique SaTiX-S2 Dual (v2)", |
| .io_type = {NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN, |
| NGENE_IO_TSOUT}, |
| .demod_attach = {demod_attach_stv0900, demod_attach_stv0900, cineS2_probe, cineS2_probe}, |
| .tuner_attach = {tuner_attach_stv6110, tuner_attach_stv6110, tuner_attach_probe, tuner_attach_probe}, |
| .fe_config = {&fe_cineS2, &fe_cineS2, &fe_cineS2_2, &fe_cineS2_2}, |
| .tuner_config = {&tuner_cineS2_0, &tuner_cineS2_1, &tuner_cineS2_0, &tuner_cineS2_1}, |
| .lnb = {0x0a, 0x08, 0x0b, 0x09}, |
| .tsf = {3, 3}, |
| .fw_version = 18, |
| .msi_supported = true, |
| }; |
| |
| static struct ngene_info ngene_info_cineS2v5 = { |
| .type = NGENE_SIDEWINDER, |
| .name = "Linux4Media cineS2 DVB-S2 Twin Tuner (v5)", |
| .io_type = {NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN, |
| NGENE_IO_TSOUT}, |
| .demod_attach = {demod_attach_stv0900, demod_attach_stv0900, cineS2_probe, cineS2_probe}, |
| .tuner_attach = {tuner_attach_stv6110, tuner_attach_stv6110, tuner_attach_probe, tuner_attach_probe}, |
| .fe_config = {&fe_cineS2, &fe_cineS2, &fe_cineS2_2, &fe_cineS2_2}, |
| .tuner_config = {&tuner_cineS2_0, &tuner_cineS2_1, &tuner_cineS2_0, &tuner_cineS2_1}, |
| .lnb = {0x0a, 0x08, 0x0b, 0x09}, |
| .tsf = {3, 3}, |
| .fw_version = 18, |
| .msi_supported = true, |
| }; |
| |
| |
| static struct ngene_info ngene_info_duoFlex = { |
| .type = NGENE_SIDEWINDER, |
| .name = "Digital Devices DuoFlex PCIe or miniPCIe", |
| .io_type = {NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN, |
| NGENE_IO_TSOUT}, |
| .demod_attach = {cineS2_probe, cineS2_probe, cineS2_probe, cineS2_probe}, |
| .tuner_attach = {tuner_attach_probe, tuner_attach_probe, tuner_attach_probe, tuner_attach_probe}, |
| .fe_config = {&fe_cineS2, &fe_cineS2, &fe_cineS2_2, &fe_cineS2_2}, |
| .tuner_config = {&tuner_cineS2_0, &tuner_cineS2_1, &tuner_cineS2_0, &tuner_cineS2_1}, |
| .lnb = {0x0a, 0x08, 0x0b, 0x09}, |
| .tsf = {3, 3}, |
| .fw_version = 18, |
| .msi_supported = true, |
| }; |
| |
| static struct ngene_info ngene_info_m780 = { |
| .type = NGENE_APP, |
| .name = "Aver M780 ATSC/QAM-B", |
| |
| /* Channel 0 is analog, which is currently unsupported */ |
| .io_type = { NGENE_IO_NONE, NGENE_IO_TSIN }, |
| .demod_attach = { NULL, demod_attach_lg330x }, |
| |
| /* Ensure these are NULL else the frame will call them (as funcs) */ |
| .tuner_attach = { 0, 0, 0, 0 }, |
| .fe_config = { NULL, &aver_m780 }, |
| .avf = { 0 }, |
| |
| /* A custom electrical interface config for the demod to bridge */ |
| .tsf = { 4, 4 }, |
| .fw_version = 15, |
| }; |
| |
| /****************************************************************************/ |
| |
| |
| |
| /****************************************************************************/ |
| /* PCI Subsystem ID *********************************************************/ |
| /****************************************************************************/ |
| |
| #define NGENE_ID(_subvend, _subdev, _driverdata) { \ |
| .vendor = NGENE_VID, .device = NGENE_PID, \ |
| .subvendor = _subvend, .subdevice = _subdev, \ |
| .driver_data = (unsigned long) &_driverdata } |
| |
| /****************************************************************************/ |
| |
| static const struct pci_device_id ngene_id_tbl[] __devinitdata = { |
| NGENE_ID(0x18c3, 0xabc3, ngene_info_cineS2), |
| NGENE_ID(0x18c3, 0xabc4, ngene_info_cineS2), |
| NGENE_ID(0x18c3, 0xdb01, ngene_info_satixS2), |
| NGENE_ID(0x18c3, 0xdb02, ngene_info_satixS2v2), |
| NGENE_ID(0x18c3, 0xdd00, ngene_info_cineS2v5), |
| NGENE_ID(0x18c3, 0xdd10, ngene_info_duoFlex), |
| NGENE_ID(0x18c3, 0xdd20, ngene_info_duoFlex), |
| NGENE_ID(0x1461, 0x062e, ngene_info_m780), |
| {0} |
| }; |
| MODULE_DEVICE_TABLE(pci, ngene_id_tbl); |
| |
| /****************************************************************************/ |
| /* Init/Exit ****************************************************************/ |
| /****************************************************************************/ |
| |
| static pci_ers_result_t ngene_error_detected(struct pci_dev *dev, |
| enum pci_channel_state state) |
| { |
| printk(KERN_ERR DEVICE_NAME ": PCI error\n"); |
| if (state == pci_channel_io_perm_failure) |
| return PCI_ERS_RESULT_DISCONNECT; |
| if (state == pci_channel_io_frozen) |
| return PCI_ERS_RESULT_NEED_RESET; |
| return PCI_ERS_RESULT_CAN_RECOVER; |
| } |
| |
| static pci_ers_result_t ngene_link_reset(struct pci_dev *dev) |
| { |
| printk(KERN_INFO DEVICE_NAME ": link reset\n"); |
| return 0; |
| } |
| |
| static pci_ers_result_t ngene_slot_reset(struct pci_dev *dev) |
| { |
| printk(KERN_INFO DEVICE_NAME ": slot reset\n"); |
| return 0; |
| } |
| |
| static void ngene_resume(struct pci_dev *dev) |
| { |
| printk(KERN_INFO DEVICE_NAME ": resume\n"); |
| } |
| |
| static struct pci_error_handlers ngene_errors = { |
| .error_detected = ngene_error_detected, |
| .link_reset = ngene_link_reset, |
| .slot_reset = ngene_slot_reset, |
| .resume = ngene_resume, |
| }; |
| |
| static struct pci_driver ngene_pci_driver = { |
| .name = "ngene", |
| .id_table = ngene_id_tbl, |
| .probe = ngene_probe, |
| .remove = __devexit_p(ngene_remove), |
| .err_handler = &ngene_errors, |
| .shutdown = ngene_shutdown, |
| }; |
| |
| static __init int module_init_ngene(void) |
| { |
| printk(KERN_INFO |
| "nGene PCIE bridge driver, Copyright (C) 2005-2007 Micronas\n"); |
| return pci_register_driver(&ngene_pci_driver); |
| } |
| |
| static __exit void module_exit_ngene(void) |
| { |
| pci_unregister_driver(&ngene_pci_driver); |
| } |
| |
| module_init(module_init_ngene); |
| module_exit(module_exit_ngene); |
| |
| MODULE_DESCRIPTION("nGene"); |
| MODULE_AUTHOR("Micronas, Ralph Metzler, Manfred Voelkel"); |
| MODULE_LICENSE("GPL"); |