| /* |
| * exynos4_tmu.c - Samsung EXYNOS4 TMU (Thermal Management Unit) |
| * |
| * Copyright (C) 2011 Samsung Electronics |
| * Donggeun Kim <dg77.kim@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/err.h> |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/platform_device.h> |
| #include <linux/interrupt.h> |
| #include <linux/clk.h> |
| #include <linux/workqueue.h> |
| #include <linux/sysfs.h> |
| #include <linux/kobject.h> |
| #include <linux/io.h> |
| #include <linux/mutex.h> |
| |
| #include <linux/hwmon.h> |
| #include <linux/hwmon-sysfs.h> |
| |
| #include <linux/platform_data/exynos4_tmu.h> |
| |
| #define EXYNOS4_TMU_REG_TRIMINFO 0x0 |
| #define EXYNOS4_TMU_REG_CONTROL 0x20 |
| #define EXYNOS4_TMU_REG_STATUS 0x28 |
| #define EXYNOS4_TMU_REG_CURRENT_TEMP 0x40 |
| #define EXYNOS4_TMU_REG_THRESHOLD_TEMP 0x44 |
| #define EXYNOS4_TMU_REG_TRIG_LEVEL0 0x50 |
| #define EXYNOS4_TMU_REG_TRIG_LEVEL1 0x54 |
| #define EXYNOS4_TMU_REG_TRIG_LEVEL2 0x58 |
| #define EXYNOS4_TMU_REG_TRIG_LEVEL3 0x5C |
| #define EXYNOS4_TMU_REG_PAST_TEMP0 0x60 |
| #define EXYNOS4_TMU_REG_PAST_TEMP1 0x64 |
| #define EXYNOS4_TMU_REG_PAST_TEMP2 0x68 |
| #define EXYNOS4_TMU_REG_PAST_TEMP3 0x6C |
| #define EXYNOS4_TMU_REG_INTEN 0x70 |
| #define EXYNOS4_TMU_REG_INTSTAT 0x74 |
| #define EXYNOS4_TMU_REG_INTCLEAR 0x78 |
| |
| #define EXYNOS4_TMU_GAIN_SHIFT 8 |
| #define EXYNOS4_TMU_REF_VOLTAGE_SHIFT 24 |
| |
| #define EXYNOS4_TMU_TRIM_TEMP_MASK 0xff |
| #define EXYNOS4_TMU_CORE_ON 3 |
| #define EXYNOS4_TMU_CORE_OFF 2 |
| #define EXYNOS4_TMU_DEF_CODE_TO_TEMP_OFFSET 50 |
| #define EXYNOS4_TMU_TRIG_LEVEL0_MASK 0x1 |
| #define EXYNOS4_TMU_TRIG_LEVEL1_MASK 0x10 |
| #define EXYNOS4_TMU_TRIG_LEVEL2_MASK 0x100 |
| #define EXYNOS4_TMU_TRIG_LEVEL3_MASK 0x1000 |
| #define EXYNOS4_TMU_INTCLEAR_VAL 0x1111 |
| |
| struct exynos4_tmu_data { |
| struct exynos4_tmu_platform_data *pdata; |
| struct device *hwmon_dev; |
| struct resource *mem; |
| void __iomem *base; |
| int irq; |
| struct work_struct irq_work; |
| struct mutex lock; |
| struct clk *clk; |
| u8 temp_error1, temp_error2; |
| }; |
| |
| /* |
| * TMU treats temperature as a mapped temperature code. |
| * The temperature is converted differently depending on the calibration type. |
| */ |
| static int temp_to_code(struct exynos4_tmu_data *data, u8 temp) |
| { |
| struct exynos4_tmu_platform_data *pdata = data->pdata; |
| int temp_code; |
| |
| /* temp should range between 25 and 125 */ |
| if (temp < 25 || temp > 125) { |
| temp_code = -EINVAL; |
| goto out; |
| } |
| |
| switch (pdata->cal_type) { |
| case TYPE_TWO_POINT_TRIMMING: |
| temp_code = (temp - 25) * |
| (data->temp_error2 - data->temp_error1) / |
| (85 - 25) + data->temp_error1; |
| break; |
| case TYPE_ONE_POINT_TRIMMING: |
| temp_code = temp + data->temp_error1 - 25; |
| break; |
| default: |
| temp_code = temp + EXYNOS4_TMU_DEF_CODE_TO_TEMP_OFFSET; |
| break; |
| } |
| out: |
| return temp_code; |
| } |
| |
| /* |
| * Calculate a temperature value from a temperature code. |
| * The unit of the temperature is degree Celsius. |
| */ |
| static int code_to_temp(struct exynos4_tmu_data *data, u8 temp_code) |
| { |
| struct exynos4_tmu_platform_data *pdata = data->pdata; |
| int temp; |
| |
| /* temp_code should range between 75 and 175 */ |
| if (temp_code < 75 || temp_code > 175) { |
| temp = -ENODATA; |
| goto out; |
| } |
| |
| switch (pdata->cal_type) { |
| case TYPE_TWO_POINT_TRIMMING: |
| temp = (temp_code - data->temp_error1) * (85 - 25) / |
| (data->temp_error2 - data->temp_error1) + 25; |
| break; |
| case TYPE_ONE_POINT_TRIMMING: |
| temp = temp_code - data->temp_error1 + 25; |
| break; |
| default: |
| temp = temp_code - EXYNOS4_TMU_DEF_CODE_TO_TEMP_OFFSET; |
| break; |
| } |
| out: |
| return temp; |
| } |
| |
| static int exynos4_tmu_initialize(struct platform_device *pdev) |
| { |
| struct exynos4_tmu_data *data = platform_get_drvdata(pdev); |
| struct exynos4_tmu_platform_data *pdata = data->pdata; |
| unsigned int status, trim_info; |
| int ret = 0, threshold_code; |
| |
| mutex_lock(&data->lock); |
| clk_enable(data->clk); |
| |
| status = readb(data->base + EXYNOS4_TMU_REG_STATUS); |
| if (!status) { |
| ret = -EBUSY; |
| goto out; |
| } |
| |
| /* Save trimming info in order to perform calibration */ |
| trim_info = readl(data->base + EXYNOS4_TMU_REG_TRIMINFO); |
| data->temp_error1 = trim_info & EXYNOS4_TMU_TRIM_TEMP_MASK; |
| data->temp_error2 = ((trim_info >> 8) & EXYNOS4_TMU_TRIM_TEMP_MASK); |
| |
| /* Write temperature code for threshold */ |
| threshold_code = temp_to_code(data, pdata->threshold); |
| if (threshold_code < 0) { |
| ret = threshold_code; |
| goto out; |
| } |
| writeb(threshold_code, |
| data->base + EXYNOS4_TMU_REG_THRESHOLD_TEMP); |
| |
| writeb(pdata->trigger_levels[0], |
| data->base + EXYNOS4_TMU_REG_TRIG_LEVEL0); |
| writeb(pdata->trigger_levels[1], |
| data->base + EXYNOS4_TMU_REG_TRIG_LEVEL1); |
| writeb(pdata->trigger_levels[2], |
| data->base + EXYNOS4_TMU_REG_TRIG_LEVEL2); |
| writeb(pdata->trigger_levels[3], |
| data->base + EXYNOS4_TMU_REG_TRIG_LEVEL3); |
| |
| writel(EXYNOS4_TMU_INTCLEAR_VAL, |
| data->base + EXYNOS4_TMU_REG_INTCLEAR); |
| out: |
| clk_disable(data->clk); |
| mutex_unlock(&data->lock); |
| |
| return ret; |
| } |
| |
| static void exynos4_tmu_control(struct platform_device *pdev, bool on) |
| { |
| struct exynos4_tmu_data *data = platform_get_drvdata(pdev); |
| struct exynos4_tmu_platform_data *pdata = data->pdata; |
| unsigned int con, interrupt_en; |
| |
| mutex_lock(&data->lock); |
| clk_enable(data->clk); |
| |
| con = pdata->reference_voltage << EXYNOS4_TMU_REF_VOLTAGE_SHIFT | |
| pdata->gain << EXYNOS4_TMU_GAIN_SHIFT; |
| if (on) { |
| con |= EXYNOS4_TMU_CORE_ON; |
| interrupt_en = pdata->trigger_level3_en << 12 | |
| pdata->trigger_level2_en << 8 | |
| pdata->trigger_level1_en << 4 | |
| pdata->trigger_level0_en; |
| } else { |
| con |= EXYNOS4_TMU_CORE_OFF; |
| interrupt_en = 0; /* Disable all interrupts */ |
| } |
| writel(interrupt_en, data->base + EXYNOS4_TMU_REG_INTEN); |
| writel(con, data->base + EXYNOS4_TMU_REG_CONTROL); |
| |
| clk_disable(data->clk); |
| mutex_unlock(&data->lock); |
| } |
| |
| static int exynos4_tmu_read(struct exynos4_tmu_data *data) |
| { |
| u8 temp_code; |
| int temp; |
| |
| mutex_lock(&data->lock); |
| clk_enable(data->clk); |
| |
| temp_code = readb(data->base + EXYNOS4_TMU_REG_CURRENT_TEMP); |
| temp = code_to_temp(data, temp_code); |
| |
| clk_disable(data->clk); |
| mutex_unlock(&data->lock); |
| |
| return temp; |
| } |
| |
| static void exynos4_tmu_work(struct work_struct *work) |
| { |
| struct exynos4_tmu_data *data = container_of(work, |
| struct exynos4_tmu_data, irq_work); |
| |
| mutex_lock(&data->lock); |
| clk_enable(data->clk); |
| |
| writel(EXYNOS4_TMU_INTCLEAR_VAL, data->base + EXYNOS4_TMU_REG_INTCLEAR); |
| |
| kobject_uevent(&data->hwmon_dev->kobj, KOBJ_CHANGE); |
| |
| enable_irq(data->irq); |
| |
| clk_disable(data->clk); |
| mutex_unlock(&data->lock); |
| } |
| |
| static irqreturn_t exynos4_tmu_irq(int irq, void *id) |
| { |
| struct exynos4_tmu_data *data = id; |
| |
| disable_irq_nosync(irq); |
| schedule_work(&data->irq_work); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static ssize_t exynos4_tmu_show_name(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return sprintf(buf, "exynos4-tmu\n"); |
| } |
| |
| static ssize_t exynos4_tmu_show_temp(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct exynos4_tmu_data *data = dev_get_drvdata(dev); |
| int ret; |
| |
| ret = exynos4_tmu_read(data); |
| if (ret < 0) |
| return ret; |
| |
| /* convert from degree Celsius to millidegree Celsius */ |
| return sprintf(buf, "%d\n", ret * 1000); |
| } |
| |
| static ssize_t exynos4_tmu_show_alarm(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct exynos4_tmu_data *data = dev_get_drvdata(dev); |
| struct exynos4_tmu_platform_data *pdata = data->pdata; |
| int temp; |
| unsigned int trigger_level; |
| |
| temp = exynos4_tmu_read(data); |
| if (temp < 0) |
| return temp; |
| |
| trigger_level = pdata->threshold + pdata->trigger_levels[attr->index]; |
| |
| return sprintf(buf, "%d\n", !!(temp > trigger_level)); |
| } |
| |
| static ssize_t exynos4_tmu_show_level(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct exynos4_tmu_data *data = dev_get_drvdata(dev); |
| struct exynos4_tmu_platform_data *pdata = data->pdata; |
| unsigned int temp = pdata->threshold + |
| pdata->trigger_levels[attr->index]; |
| |
| return sprintf(buf, "%u\n", temp * 1000); |
| } |
| |
| static DEVICE_ATTR(name, S_IRUGO, exynos4_tmu_show_name, NULL); |
| static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, exynos4_tmu_show_temp, NULL, 0); |
| |
| static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, |
| exynos4_tmu_show_alarm, NULL, 1); |
| static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, |
| exynos4_tmu_show_alarm, NULL, 2); |
| static SENSOR_DEVICE_ATTR(temp1_emergency_alarm, S_IRUGO, |
| exynos4_tmu_show_alarm, NULL, 3); |
| |
| static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, exynos4_tmu_show_level, NULL, 1); |
| static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, exynos4_tmu_show_level, NULL, 2); |
| static SENSOR_DEVICE_ATTR(temp1_emergency, S_IRUGO, |
| exynos4_tmu_show_level, NULL, 3); |
| |
| static struct attribute *exynos4_tmu_attributes[] = { |
| &dev_attr_name.attr, |
| &sensor_dev_attr_temp1_input.dev_attr.attr, |
| &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, |
| &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, |
| &sensor_dev_attr_temp1_emergency_alarm.dev_attr.attr, |
| &sensor_dev_attr_temp1_max.dev_attr.attr, |
| &sensor_dev_attr_temp1_crit.dev_attr.attr, |
| &sensor_dev_attr_temp1_emergency.dev_attr.attr, |
| NULL, |
| }; |
| |
| static const struct attribute_group exynos4_tmu_attr_group = { |
| .attrs = exynos4_tmu_attributes, |
| }; |
| |
| static int __devinit exynos4_tmu_probe(struct platform_device *pdev) |
| { |
| struct exynos4_tmu_data *data; |
| struct exynos4_tmu_platform_data *pdata = pdev->dev.platform_data; |
| int ret; |
| |
| if (!pdata) { |
| dev_err(&pdev->dev, "No platform init data supplied.\n"); |
| return -ENODEV; |
| } |
| |
| data = kzalloc(sizeof(struct exynos4_tmu_data), GFP_KERNEL); |
| if (!data) { |
| dev_err(&pdev->dev, "Failed to allocate driver structure\n"); |
| return -ENOMEM; |
| } |
| |
| data->irq = platform_get_irq(pdev, 0); |
| if (data->irq < 0) { |
| ret = data->irq; |
| dev_err(&pdev->dev, "Failed to get platform irq\n"); |
| goto err_free; |
| } |
| |
| INIT_WORK(&data->irq_work, exynos4_tmu_work); |
| |
| data->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!data->mem) { |
| ret = -ENOENT; |
| dev_err(&pdev->dev, "Failed to get platform resource\n"); |
| goto err_free; |
| } |
| |
| data->mem = request_mem_region(data->mem->start, |
| resource_size(data->mem), pdev->name); |
| if (!data->mem) { |
| ret = -ENODEV; |
| dev_err(&pdev->dev, "Failed to request memory region\n"); |
| goto err_free; |
| } |
| |
| data->base = ioremap(data->mem->start, resource_size(data->mem)); |
| if (!data->base) { |
| ret = -ENODEV; |
| dev_err(&pdev->dev, "Failed to ioremap memory\n"); |
| goto err_mem_region; |
| } |
| |
| ret = request_irq(data->irq, exynos4_tmu_irq, |
| IRQF_TRIGGER_RISING, |
| "exynos4-tmu", data); |
| if (ret) { |
| dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq); |
| goto err_io_remap; |
| } |
| |
| data->clk = clk_get(NULL, "tmu_apbif"); |
| if (IS_ERR(data->clk)) { |
| ret = PTR_ERR(data->clk); |
| dev_err(&pdev->dev, "Failed to get clock\n"); |
| goto err_irq; |
| } |
| |
| data->pdata = pdata; |
| platform_set_drvdata(pdev, data); |
| mutex_init(&data->lock); |
| |
| ret = exynos4_tmu_initialize(pdev); |
| if (ret) { |
| dev_err(&pdev->dev, "Failed to initialize TMU\n"); |
| goto err_clk; |
| } |
| |
| ret = sysfs_create_group(&pdev->dev.kobj, &exynos4_tmu_attr_group); |
| if (ret) { |
| dev_err(&pdev->dev, "Failed to create sysfs group\n"); |
| goto err_clk; |
| } |
| |
| data->hwmon_dev = hwmon_device_register(&pdev->dev); |
| if (IS_ERR(data->hwmon_dev)) { |
| ret = PTR_ERR(data->hwmon_dev); |
| dev_err(&pdev->dev, "Failed to register hwmon device\n"); |
| goto err_create_group; |
| } |
| |
| exynos4_tmu_control(pdev, true); |
| |
| return 0; |
| |
| err_create_group: |
| sysfs_remove_group(&pdev->dev.kobj, &exynos4_tmu_attr_group); |
| err_clk: |
| platform_set_drvdata(pdev, NULL); |
| clk_put(data->clk); |
| err_irq: |
| free_irq(data->irq, data); |
| err_io_remap: |
| iounmap(data->base); |
| err_mem_region: |
| release_mem_region(data->mem->start, resource_size(data->mem)); |
| err_free: |
| kfree(data); |
| |
| return ret; |
| } |
| |
| static int __devexit exynos4_tmu_remove(struct platform_device *pdev) |
| { |
| struct exynos4_tmu_data *data = platform_get_drvdata(pdev); |
| |
| exynos4_tmu_control(pdev, false); |
| |
| hwmon_device_unregister(data->hwmon_dev); |
| sysfs_remove_group(&pdev->dev.kobj, &exynos4_tmu_attr_group); |
| |
| clk_put(data->clk); |
| |
| free_irq(data->irq, data); |
| |
| iounmap(data->base); |
| release_mem_region(data->mem->start, resource_size(data->mem)); |
| |
| platform_set_drvdata(pdev, NULL); |
| |
| kfree(data); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int exynos4_tmu_suspend(struct platform_device *pdev, pm_message_t state) |
| { |
| exynos4_tmu_control(pdev, false); |
| |
| return 0; |
| } |
| |
| static int exynos4_tmu_resume(struct platform_device *pdev) |
| { |
| exynos4_tmu_initialize(pdev); |
| exynos4_tmu_control(pdev, true); |
| |
| return 0; |
| } |
| #else |
| #define exynos4_tmu_suspend NULL |
| #define exynos4_tmu_resume NULL |
| #endif |
| |
| static struct platform_driver exynos4_tmu_driver = { |
| .driver = { |
| .name = "exynos4-tmu", |
| .owner = THIS_MODULE, |
| }, |
| .probe = exynos4_tmu_probe, |
| .remove = __devexit_p(exynos4_tmu_remove), |
| .suspend = exynos4_tmu_suspend, |
| .resume = exynos4_tmu_resume, |
| }; |
| |
| module_platform_driver(exynos4_tmu_driver); |
| |
| MODULE_DESCRIPTION("EXYNOS4 TMU Driver"); |
| MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:exynos4-tmu"); |