blob: 00bff46ca48beb606557f8fba7a1974f571ebb91 [file] [log] [blame]
/*
* pm.c - Common OMAP2+ power management-related code
*
* Copyright (C) 2010 Texas Instruments, Inc.
* Copyright (C) 2010 Nokia Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/err.h>
#include <linux/opp.h>
#include <linux/export.h>
#include <plat/omap-pm.h>
#include <plat/omap_device.h>
#include <plat/common.h>
#include "voltage.h"
#include "powerdomain.h"
#include "clockdomain.h"
#include "pm.h"
#include "twl-common.h"
static struct omap_device_pm_latency *pm_lats;
static int _init_omap_device(char *name)
{
struct omap_hwmod *oh;
struct platform_device *pdev;
oh = omap_hwmod_lookup(name);
if (WARN(!oh, "%s: could not find omap_hwmod for %s\n",
__func__, name))
return -ENODEV;
pdev = omap_device_build(oh->name, 0, oh, NULL, 0, pm_lats, 0, false);
if (WARN(IS_ERR(pdev), "%s: could not build omap_device for %s\n",
__func__, name))
return -ENODEV;
return 0;
}
/*
* Build omap_devices for processors and bus.
*/
static void omap2_init_processor_devices(void)
{
_init_omap_device("mpu");
if (omap3_has_iva())
_init_omap_device("iva");
if (cpu_is_omap44xx()) {
_init_omap_device("l3_main_1");
_init_omap_device("dsp");
_init_omap_device("iva");
} else {
_init_omap_device("l3_main");
}
}
/* Types of sleep_switch used in omap_set_pwrdm_state */
#define FORCEWAKEUP_SWITCH 0
#define LOWPOWERSTATE_SWITCH 1
/*
* This sets pwrdm state (other than mpu & core. Currently only ON &
* RET are supported.
*/
int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
{
u32 cur_state;
int sleep_switch = -1;
int ret = 0;
int hwsup = 0;
if (pwrdm == NULL || IS_ERR(pwrdm))
return -EINVAL;
while (!(pwrdm->pwrsts & (1 << state))) {
if (state == PWRDM_POWER_OFF)
return ret;
state--;
}
cur_state = pwrdm_read_next_pwrst(pwrdm);
if (cur_state == state)
return ret;
if (pwrdm_read_pwrst(pwrdm) < PWRDM_POWER_ON) {
if ((pwrdm_read_pwrst(pwrdm) > state) &&
(pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE)) {
sleep_switch = LOWPOWERSTATE_SWITCH;
} else {
hwsup = clkdm_in_hwsup(pwrdm->pwrdm_clkdms[0]);
clkdm_wakeup(pwrdm->pwrdm_clkdms[0]);
sleep_switch = FORCEWAKEUP_SWITCH;
}
}
ret = pwrdm_set_next_pwrst(pwrdm, state);
if (ret) {
pr_err("%s: unable to set state of powerdomain: %s\n",
__func__, pwrdm->name);
goto err;
}
switch (sleep_switch) {
case FORCEWAKEUP_SWITCH:
if (hwsup)
clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]);
else
clkdm_sleep(pwrdm->pwrdm_clkdms[0]);
break;
case LOWPOWERSTATE_SWITCH:
pwrdm_set_lowpwrstchange(pwrdm);
break;
default:
return ret;
}
pwrdm_state_switch(pwrdm);
err:
return ret;
}
/*
* This API is to be called during init to set the various voltage
* domains to the voltage as per the opp table. Typically we boot up
* at the nominal voltage. So this function finds out the rate of
* the clock associated with the voltage domain, finds out the correct
* opp entry and sets the voltage domain to the voltage specified
* in the opp entry
*/
static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
const char *oh_name)
{
struct voltagedomain *voltdm;
struct clk *clk;
struct opp *opp;
unsigned long freq, bootup_volt;
struct device *dev;
if (!vdd_name || !clk_name || !oh_name) {
pr_err("%s: invalid parameters\n", __func__);
goto exit;
}
dev = omap_device_get_by_hwmod_name(oh_name);
if (IS_ERR(dev)) {
pr_err("%s: Unable to get dev pointer for hwmod %s\n",
__func__, oh_name);
goto exit;
}
voltdm = voltdm_lookup(vdd_name);
if (IS_ERR(voltdm)) {
pr_err("%s: unable to get vdd pointer for vdd_%s\n",
__func__, vdd_name);
goto exit;
}
clk = clk_get(NULL, clk_name);
if (IS_ERR(clk)) {
pr_err("%s: unable to get clk %s\n", __func__, clk_name);
goto exit;
}
freq = clk->rate;
clk_put(clk);
opp = opp_find_freq_ceil(dev, &freq);
if (IS_ERR(opp)) {
pr_err("%s: unable to find boot up OPP for vdd_%s\n",
__func__, vdd_name);
goto exit;
}
bootup_volt = opp_get_voltage(opp);
if (!bootup_volt) {
pr_err("%s: unable to find voltage corresponding "
"to the bootup OPP for vdd_%s\n", __func__, vdd_name);
goto exit;
}
voltdm_scale(voltdm, bootup_volt);
return 0;
exit:
pr_err("%s: unable to set vdd_%s\n", __func__, vdd_name);
return -EINVAL;
}
static void __init omap3_init_voltages(void)
{
if (!cpu_is_omap34xx())
return;
omap2_set_init_voltage("mpu_iva", "dpll1_ck", "mpu");
omap2_set_init_voltage("core", "l3_ick", "l3_main");
}
static void __init omap4_init_voltages(void)
{
if (!cpu_is_omap44xx())
return;
omap2_set_init_voltage("mpu", "dpll_mpu_ck", "mpu");
omap2_set_init_voltage("core", "l3_div_ck", "l3_main_1");
omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", "iva");
}
static int __init omap2_common_pm_init(void)
{
if (!of_have_populated_dt())
omap2_init_processor_devices();
omap_pm_if_init();
return 0;
}
postcore_initcall(omap2_common_pm_init);
static int __init omap2_common_pm_late_init(void)
{
/* Init the voltage layer */
omap_pmic_late_init();
omap_voltage_late_init();
/* Initialize the voltages */
omap3_init_voltages();
omap4_init_voltages();
/* Smartreflex device init */
omap_devinit_smartreflex();
return 0;
}
late_initcall(omap2_common_pm_late_init);