| /* ========================================================================== |
| * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_attr.c $ |
| * $Revision: #44 $ |
| * $Date: 2010/11/29 $ |
| * $Change: 1636033 $ |
| * |
| * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, |
| * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless |
| * otherwise expressly agreed to in writing between Synopsys and you. |
| * |
| * The Software IS NOT an item of Licensed Software or Licensed Product under |
| * any End User Software License Agreement or Agreement for Licensed Product |
| * with Synopsys or any supplement thereto. You are permitted to use and |
| * redistribute this Software in source and binary forms, with or without |
| * modification, provided that redistributions of source code must retain this |
| * notice. You may not view, use, disclose, copy or distribute this file or |
| * any information contained herein except pursuant to this license grant from |
| * Synopsys. If you do not agree with this notice, including the disclaimer |
| * below, then you are not authorized to use the Software. |
| * |
| * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, |
| * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
| * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
| * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH |
| * DAMAGE. |
| * ========================================================================== */ |
| |
| /** @file |
| * |
| * The diagnostic interface will provide access to the controller for |
| * bringing up the hardware and testing. The Linux driver attributes |
| * feature will be used to provide the Linux Diagnostic |
| * Interface. These attributes are accessed through sysfs. |
| */ |
| |
| /** @page "Linux Module Attributes" |
| * |
| * The Linux module attributes feature is used to provide the Linux |
| * Diagnostic Interface. These attributes are accessed through sysfs. |
| * The diagnostic interface will provide access to the controller for |
| * bringing up the hardware and testing. |
| |
| The following table shows the attributes. |
| <table> |
| <tr> |
| <td><b> Name</b></td> |
| <td><b> Description</b></td> |
| <td><b> Access</b></td> |
| </tr> |
| |
| <tr> |
| <td> mode </td> |
| <td> Returns the current mode: 0 for device mode, 1 for host mode</td> |
| <td> Read</td> |
| </tr> |
| |
| <tr> |
| <td> hnpcapable </td> |
| <td> Gets or sets the "HNP-capable" bit in the Core USB Configuraton Register. |
| Read returns the current value.</td> |
| <td> Read/Write</td> |
| </tr> |
| |
| <tr> |
| <td> srpcapable </td> |
| <td> Gets or sets the "SRP-capable" bit in the Core USB Configuraton Register. |
| Read returns the current value.</td> |
| <td> Read/Write</td> |
| </tr> |
| |
| <tr> |
| <td> hsic_connect </td> |
| <td> Gets or sets the "HSIC-Connect" bit in the GLPMCFG Register. |
| Read returns the current value.</td> |
| <td> Read/Write</td> |
| </tr> |
| |
| <tr> |
| <td> inv_sel_hsic </td> |
| <td> Gets or sets the "Invert Select HSIC" bit in the GLPMFG Register. |
| Read returns the current value.</td> |
| <td> Read/Write</td> |
| </tr> |
| |
| <tr> |
| <td> hnp </td> |
| <td> Initiates the Host Negotiation Protocol. Read returns the status.</td> |
| <td> Read/Write</td> |
| </tr> |
| |
| <tr> |
| <td> srp </td> |
| <td> Initiates the Session Request Protocol. Read returns the status.</td> |
| <td> Read/Write</td> |
| </tr> |
| |
| <tr> |
| <td> buspower </td> |
| <td> Gets or sets the Power State of the bus (0 - Off or 1 - On)</td> |
| <td> Read/Write</td> |
| </tr> |
| |
| <tr> |
| <td> bussuspend </td> |
| <td> Suspends the USB bus.</td> |
| <td> Read/Write</td> |
| </tr> |
| |
| <tr> |
| <td> busconnected </td> |
| <td> Gets the connection status of the bus</td> |
| <td> Read</td> |
| </tr> |
| |
| <tr> |
| <td> gotgctl </td> |
| <td> Gets or sets the Core Control Status Register.</td> |
| <td> Read/Write</td> |
| </tr> |
| |
| <tr> |
| <td> gusbcfg </td> |
| <td> Gets or sets the Core USB Configuration Register</td> |
| <td> Read/Write</td> |
| </tr> |
| |
| <tr> |
| <td> grxfsiz </td> |
| <td> Gets or sets the Receive FIFO Size Register</td> |
| <td> Read/Write</td> |
| </tr> |
| |
| <tr> |
| <td> gnptxfsiz </td> |
| <td> Gets or sets the non-periodic Transmit Size Register</td> |
| <td> Read/Write</td> |
| </tr> |
| |
| <tr> |
| <td> gpvndctl </td> |
| <td> Gets or sets the PHY Vendor Control Register</td> |
| <td> Read/Write</td> |
| </tr> |
| |
| <tr> |
| <td> ggpio </td> |
| <td> Gets the value in the lower 16-bits of the General Purpose IO Register |
| or sets the upper 16 bits.</td> |
| <td> Read/Write</td> |
| </tr> |
| |
| <tr> |
| <td> guid </td> |
| <td> Gets or sets the value of the User ID Register</td> |
| <td> Read/Write</td> |
| </tr> |
| |
| <tr> |
| <td> gsnpsid </td> |
| <td> Gets the value of the Synopsys ID Regester</td> |
| <td> Read</td> |
| </tr> |
| |
| <tr> |
| <td> devspeed </td> |
| <td> Gets or sets the device speed setting in the DCFG register</td> |
| <td> Read/Write</td> |
| </tr> |
| |
| <tr> |
| <td> enumspeed </td> |
| <td> Gets the device enumeration Speed.</td> |
| <td> Read</td> |
| </tr> |
| |
| <tr> |
| <td> hptxfsiz </td> |
| <td> Gets the value of the Host Periodic Transmit FIFO</td> |
| <td> Read</td> |
| </tr> |
| |
| <tr> |
| <td> hprt0 </td> |
| <td> Gets or sets the value in the Host Port Control and Status Register</td> |
| <td> Read/Write</td> |
| </tr> |
| |
| <tr> |
| <td> regoffset </td> |
| <td> Sets the register offset for the next Register Access</td> |
| <td> Read/Write</td> |
| </tr> |
| |
| <tr> |
| <td> regvalue </td> |
| <td> Gets or sets the value of the register at the offset in the regoffset attribute.</td> |
| <td> Read/Write</td> |
| </tr> |
| |
| <tr> |
| <td> remote_wakeup </td> |
| <td> On read, shows the status of Remote Wakeup. On write, initiates a remote |
| wakeup of the host. When bit 0 is 1 and Remote Wakeup is enabled, the Remote |
| Wakeup signalling bit in the Device Control Register is set for 1 |
| milli-second.</td> |
| <td> Read/Write</td> |
| </tr> |
| |
| <tr> |
| <td> rem_wakeup_pwrdn </td> |
| <td> On read, shows the status core - hibernated or not. On write, initiates |
| a remote wakeup of the device from Hibernation. </td> |
| <td> Read/Write</td> |
| </tr> |
| |
| <tr> |
| <td> mode_ch_tim_en </td> |
| <td> This bit is used to enable or disable the host core to wait for 200 PHY |
| clock cycles at the end of Resume to change the opmode signal to the PHY to 00 |
| after Suspend or LPM. </td> |
| <td> Read/Write</td> |
| </tr> |
| |
| <tr> |
| <td> fr_interval </td> |
| <td> On read, shows the value of HFIR Frame Interval. On write, dynamically |
| reload HFIR register during runtime. The application can write a value to this |
| register only after the Port Enable bit of the Host Port Control and Status |
| register (HPRT.PrtEnaPort) has been set </td> |
| <td> Read/Write</td> |
| </tr> |
| |
| <tr> |
| <td> disconnect_us </td> |
| <td> On read, shows the status of disconnect_device_us. On write, sets disconnect_us |
| which causes soft disconnect for 100us. Applicable only for device mode of operation.</td> |
| <td> Read/Write</td> |
| </tr> |
| |
| <tr> |
| <td> regdump </td> |
| <td> Dumps the contents of core registers.</td> |
| <td> Read</td> |
| </tr> |
| |
| <tr> |
| <td> spramdump </td> |
| <td> Dumps the contents of core registers.</td> |
| <td> Read</td> |
| </tr> |
| |
| <tr> |
| <td> hcddump </td> |
| <td> Dumps the current HCD state.</td> |
| <td> Read</td> |
| </tr> |
| |
| <tr> |
| <td> hcd_frrem </td> |
| <td> Shows the average value of the Frame Remaining |
| field in the Host Frame Number/Frame Remaining register when an SOF interrupt |
| occurs. This can be used to determine the average interrupt latency. Also |
| shows the average Frame Remaining value for start_transfer and the "a" and |
| "b" sample points. The "a" and "b" sample points may be used during debugging |
| bto determine how long it takes to execute a section of the HCD code.</td> |
| <td> Read</td> |
| </tr> |
| |
| <tr> |
| <td> rd_reg_test </td> |
| <td> Displays the time required to read the GNPTXFSIZ register many times |
| (the output shows the number of times the register is read). |
| <td> Read</td> |
| </tr> |
| |
| <tr> |
| <td> wr_reg_test </td> |
| <td> Displays the time required to write the GNPTXFSIZ register many times |
| (the output shows the number of times the register is written). |
| <td> Read</td> |
| </tr> |
| |
| <tr> |
| <td> lpm_response </td> |
| <td> Gets or sets lpm_response mode. Applicable only in device mode. |
| <td> Write</td> |
| </tr> |
| |
| <tr> |
| <td> sleep_status </td> |
| <td> Shows sleep status of device. |
| <td> Read</td> |
| </tr> |
| |
| </table> |
| |
| Example usage: |
| To get the current mode: |
| cat /sys/devices/lm0/mode |
| |
| To power down the USB: |
| echo 0 > /sys/devices/lm0/buspower |
| */ |
| |
| #include "dwc_otg_os_dep.h" |
| #include "dwc_os.h" |
| #include "dwc_otg_driver.h" |
| #include "dwc_otg_attr.h" |
| #include "dwc_otg_core_if.h" |
| #include "dwc_otg_pcd_if.h" |
| #include "dwc_otg_hcd_if.h" |
| |
| /* |
| * MACROs for defining sysfs attribute |
| */ |
| #ifdef LM_INTERFACE |
| |
| #define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \ |
| static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ |
| { \ |
| struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \ |
| dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); \ |
| uint32_t val; \ |
| val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \ |
| return sprintf (buf, "%s = 0x%x\n", _string_, val); \ |
| } |
| #define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_string_) \ |
| static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \ |
| const char *buf, size_t count) \ |
| { \ |
| struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \ |
| dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); \ |
| uint32_t set = simple_strtoul(buf, NULL, 16); \ |
| dwc_otg_set_##_otg_attr_name_(otg_dev->core_if, set);\ |
| return count; \ |
| } |
| |
| #elif defined(PCI_INTERFACE) |
| |
| #define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \ |
| static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ |
| { \ |
| dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \ |
| uint32_t val; \ |
| val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \ |
| return sprintf (buf, "%s = 0x%x\n", _string_, val); \ |
| } |
| #define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_string_) \ |
| static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \ |
| const char *buf, size_t count) \ |
| { \ |
| dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \ |
| uint32_t set = simple_strtoul(buf, NULL, 16); \ |
| dwc_otg_set_##_otg_attr_name_(otg_dev->core_if, set);\ |
| return count; \ |
| } |
| #else |
| |
| #define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \ |
| static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ |
| { \ |
| dwc_otg_device_t *otg_dev = dev_get_platdata(_dev); \ |
| uint32_t val; \ |
| val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \ |
| return sprintf (buf, "%s = 0x%x\n", _string_, val); \ |
| } |
| #define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_string_) \ |
| static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \ |
| const char *buf, size_t count) \ |
| { \ |
| dwc_otg_device_t *otg_dev = dev_get_platdata(_dev); \ |
| uint32_t set = simple_strtoul(buf, NULL, 16); \ |
| dwc_otg_set_##_otg_attr_name_(otg_dev->core_if, set);\ |
| return count; \ |
| } |
| |
| |
| #endif |
| |
| /* |
| * MACROs for defining sysfs attribute for 32-bit registers |
| */ |
| #ifdef LM_INTERFACE |
| #define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \ |
| static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ |
| { \ |
| struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \ |
| dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); \ |
| uint32_t val; \ |
| val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \ |
| return sprintf (buf, "%s = 0x%08x\n", _string_, val); \ |
| } |
| #define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_string_) \ |
| static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \ |
| const char *buf, size_t count) \ |
| { \ |
| struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \ |
| dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); \ |
| uint32_t val = simple_strtoul(buf, NULL, 16); \ |
| dwc_otg_set_##_otg_attr_name_ (otg_dev->core_if, val); \ |
| return count; \ |
| } |
| #elif defined(PCI_INTERFACE) |
| #define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \ |
| static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ |
| { \ |
| dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \ |
| uint32_t val; \ |
| val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \ |
| return sprintf (buf, "%s = 0x%08x\n", _string_, val); \ |
| } |
| #define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_string_) \ |
| static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \ |
| const char *buf, size_t count) \ |
| { \ |
| dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \ |
| uint32_t val = simple_strtoul(buf, NULL, 16); \ |
| dwc_otg_set_##_otg_attr_name_ (otg_dev->core_if, val); \ |
| return count; \ |
| } |
| #else |
| #define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \ |
| static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ |
| { \ |
| dwc_otg_device_t *otg_dev = dev_get_platdata(_dev); \ |
| uint32_t val; \ |
| val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \ |
| return sprintf (buf, "%s = 0x%08x\n", _string_, val); \ |
| } |
| #define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_string_) \ |
| static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \ |
| const char *buf, size_t count) \ |
| { \ |
| dwc_otg_device_t *otg_dev = dev_get_platdata(_dev); \ |
| uint32_t val = simple_strtoul(buf, NULL, 16); \ |
| dwc_otg_set_##_otg_attr_name_ (otg_dev->core_if, val); \ |
| return count; \ |
| } |
| #endif |
| |
| #define DWC_OTG_DEVICE_ATTR_BITFIELD_RW(_otg_attr_name_,_string_) \ |
| DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \ |
| DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_string_) \ |
| DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store); |
| |
| #define DWC_OTG_DEVICE_ATTR_BITFIELD_RO(_otg_attr_name_,_string_) \ |
| DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \ |
| DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL); |
| |
| #define DWC_OTG_DEVICE_ATTR_REG32_RW(_otg_attr_name_,_addr_,_string_) \ |
| DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \ |
| DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_string_) \ |
| DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store); |
| |
| #define DWC_OTG_DEVICE_ATTR_REG32_RO(_otg_attr_name_,_addr_,_string_) \ |
| DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \ |
| DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL); |
| |
| /** @name Functions for Show/Store of Attributes */ |
| /**@{*/ |
| |
| /** |
| * Show the register offset of the Register Access. |
| */ |
| static ssize_t regoffset_show(struct device *_dev, |
| struct device_attribute *attr, char *buf) |
| { |
| #ifdef LM_INTERFACE |
| struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); |
| dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); |
| #elif defined(PCI_INTERFACE) |
| dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); |
| #else |
| dwc_otg_device_t *otg_dev = dev_get_platdata(_dev); |
| #endif |
| |
| return snprintf(buf, sizeof("0xFFFFFFFF\n") + 1, "0x%08x\n", |
| otg_dev->os_dep.reg_offset); |
| } |
| |
| /** |
| * Set the register offset for the next Register Access Read/Write |
| */ |
| static ssize_t regoffset_store(struct device *_dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| #ifdef LM_INTERFACE |
| struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); |
| dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); |
| #elif defined(PCI_INTERFACE) |
| dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); |
| #else |
| dwc_otg_device_t *otg_dev = dev_get_platdata(_dev); |
| #endif |
| |
| uint32_t offset = simple_strtoul(buf, NULL, 16); |
| #ifdef LM_INTERFACE |
| if (offset < SZ_256K) { |
| #elif defined(PCI_INTERFACE) |
| if (offset < 0x00040000) { |
| #else |
| if (offset < 0x00040000) { |
| #endif |
| otg_dev->os_dep.reg_offset = offset; |
| } else { |
| dev_err(_dev, "invalid offset\n"); |
| } |
| |
| return count; |
| } |
| |
| DEVICE_ATTR(regoffset, S_IRUGO | S_IWUSR, regoffset_show, regoffset_store); |
| |
| /** |
| * Show the value of the register at the offset in the reg_offset |
| * attribute. |
| */ |
| static ssize_t regvalue_show(struct device *_dev, |
| struct device_attribute *attr, char *buf) |
| { |
| #ifdef LM_INTERFACE |
| struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); |
| dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); |
| #elif defined(PCI_INTERFACE) |
| dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); |
| #else |
| dwc_otg_device_t *otg_dev = dev_get_platdata(_dev); |
| #endif |
| |
| uint32_t val; |
| volatile uint32_t *addr; |
| |
| if (otg_dev->os_dep.reg_offset != 0xFFFFFFFF && 0 != otg_dev->os_dep.base) { |
| /* Calculate the address */ |
| addr = (uint32_t *) (otg_dev->os_dep.reg_offset + |
| (uint8_t *) otg_dev->os_dep.base); |
| val = DWC_READ_REG32(addr); |
| return snprintf(buf, |
| sizeof("Reg@0xFFFFFFFF = 0xFFFFFFFF\n") + 1, |
| "Reg@0x%06x = 0x%08x\n", otg_dev->os_dep.reg_offset, |
| val); |
| } else { |
| dev_err(_dev, "Invalid offset (0x%0x)\n", otg_dev->os_dep.reg_offset); |
| return sprintf(buf, "invalid offset\n"); |
| } |
| } |
| |
| /** |
| * Store the value in the register at the offset in the reg_offset |
| * attribute. |
| * |
| */ |
| static ssize_t regvalue_store(struct device *_dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| #ifdef LM_INTERFACE |
| struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); |
| dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); |
| #elif defined(PCI_INTERFACE) |
| dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); |
| #else |
| dwc_otg_device_t *otg_dev = dev_get_platdata(_dev); |
| #endif |
| |
| volatile uint32_t *addr; |
| uint32_t val = simple_strtoul(buf, NULL, 16); |
| //dev_dbg(_dev, "Offset=0x%08x Val=0x%08x\n", otg_dev->reg_offset, val); |
| if (otg_dev->os_dep.reg_offset != 0xFFFFFFFF && 0 != otg_dev->os_dep.base) { |
| /* Calculate the address */ |
| addr = (uint32_t *) (otg_dev->os_dep.reg_offset + |
| (uint8_t *) otg_dev->os_dep.base); |
| DWC_WRITE_REG32(addr, val); |
| } else { |
| dev_err(_dev, "Invalid Register Offset (0x%08x)\n", |
| otg_dev->os_dep.reg_offset); |
| } |
| return count; |
| } |
| |
| DEVICE_ATTR(regvalue, S_IRUGO | S_IWUSR, regvalue_show, regvalue_store); |
| |
| /* |
| * Attributes |
| */ |
| DWC_OTG_DEVICE_ATTR_BITFIELD_RO(mode, "Mode"); |
| DWC_OTG_DEVICE_ATTR_BITFIELD_RW(hnpcapable, "HNPCapable"); |
| DWC_OTG_DEVICE_ATTR_BITFIELD_RW(srpcapable, "SRPCapable"); |
| DWC_OTG_DEVICE_ATTR_BITFIELD_RW(hsic_connect, "HSIC Connect"); |
| DWC_OTG_DEVICE_ATTR_BITFIELD_RW(inv_sel_hsic, "Invert Select HSIC"); |
| |
| //DWC_OTG_DEVICE_ATTR_BITFIELD_RW(buspower,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode"); |
| //DWC_OTG_DEVICE_ATTR_BITFIELD_RW(bussuspend,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode"); |
| DWC_OTG_DEVICE_ATTR_BITFIELD_RO(busconnected, "Bus Connected"); |
| |
| DWC_OTG_DEVICE_ATTR_REG32_RW(gotgctl, 0, "GOTGCTL"); |
| DWC_OTG_DEVICE_ATTR_REG32_RW(gusbcfg, |
| &(otg_dev->core_if->core_global_regs->gusbcfg), |
| "GUSBCFG"); |
| DWC_OTG_DEVICE_ATTR_REG32_RW(grxfsiz, |
| &(otg_dev->core_if->core_global_regs->grxfsiz), |
| "GRXFSIZ"); |
| DWC_OTG_DEVICE_ATTR_REG32_RW(gnptxfsiz, |
| &(otg_dev->core_if->core_global_regs->gnptxfsiz), |
| "GNPTXFSIZ"); |
| DWC_OTG_DEVICE_ATTR_REG32_RW(gpvndctl, |
| &(otg_dev->core_if->core_global_regs->gpvndctl), |
| "GPVNDCTL"); |
| DWC_OTG_DEVICE_ATTR_REG32_RW(ggpio, |
| &(otg_dev->core_if->core_global_regs->ggpio), |
| "GGPIO"); |
| DWC_OTG_DEVICE_ATTR_REG32_RW(guid, &(otg_dev->core_if->core_global_regs->guid), |
| "GUID"); |
| DWC_OTG_DEVICE_ATTR_REG32_RO(gsnpsid, |
| &(otg_dev->core_if->core_global_regs->gsnpsid), |
| "GSNPSID"); |
| DWC_OTG_DEVICE_ATTR_BITFIELD_RW(devspeed, "Device Speed"); |
| DWC_OTG_DEVICE_ATTR_BITFIELD_RO(enumspeed, "Device Enumeration Speed"); |
| |
| DWC_OTG_DEVICE_ATTR_REG32_RO(hptxfsiz, |
| &(otg_dev->core_if->core_global_regs->hptxfsiz), |
| "HPTXFSIZ"); |
| DWC_OTG_DEVICE_ATTR_REG32_RW(hprt0, otg_dev->core_if->host_if->hprt0, "HPRT0"); |
| |
| /** |
| * @todo Add code to initiate the HNP. |
| */ |
| /** |
| * Show the HNP status bit |
| */ |
| static ssize_t hnp_show(struct device *_dev, |
| struct device_attribute *attr, char *buf) |
| { |
| #ifdef LM_INTERFACE |
| struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); |
| dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); |
| #elif defined(PCI_INTERFACE) |
| dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); |
| #else |
| dwc_otg_device_t *otg_dev = dev_get_platdata(_dev); |
| #endif |
| return sprintf(buf, "HstNegScs = 0x%x\n", |
| dwc_otg_get_hnpstatus(otg_dev->core_if)); |
| } |
| |
| /** |
| * Set the HNP Request bit |
| */ |
| static ssize_t hnp_store(struct device *_dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| #ifdef LM_INTERFACE |
| struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); |
| dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); |
| #elif defined(PCI_INTERFACE) |
| dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); |
| #else |
| dwc_otg_device_t *otg_dev = dev_get_platdata(_dev); |
| #endif |
| uint32_t in = simple_strtoul(buf, NULL, 16); |
| dwc_otg_set_hnpreq(otg_dev->core_if, in); |
| return count; |
| } |
| |
| DEVICE_ATTR(hnp, 0644, hnp_show, hnp_store); |
| |
| /** |
| * @todo Add code to initiate the SRP. |
| */ |
| /** |
| * Show the SRP status bit |
| */ |
| static ssize_t srp_show(struct device *_dev, |
| struct device_attribute *attr, char *buf) |
| { |
| #ifndef DWC_HOST_ONLY |
| #ifdef LM_INTERFACE |
| struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); |
| dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); |
| #elif defined(PCI_INTERFACE) |
| dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); |
| #else |
| dwc_otg_device_t *otg_dev = dev_get_platdata(_dev); |
| #endif |
| return sprintf(buf, "SesReqScs = 0x%x\n", |
| dwc_otg_get_srpstatus(otg_dev->core_if)); |
| #else |
| return sprintf(buf, "Host Only Mode!\n"); |
| #endif |
| } |
| |
| /** |
| * Set the SRP Request bit |
| */ |
| static ssize_t srp_store(struct device *_dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| #ifndef DWC_HOST_ONLY |
| #ifdef LM_INTERFACE |
| struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); |
| dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); |
| #elif defined(PCI_INTERFACE) |
| dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); |
| #else |
| dwc_otg_device_t *otg_dev = dev_get_platdata(_dev); |
| #endif |
| dwc_otg_pcd_initiate_srp(otg_dev->pcd); |
| #endif |
| return count; |
| } |
| |
| DEVICE_ATTR(srp, 0644, srp_show, srp_store); |
| |
| /** |
| * @todo Need to do more for power on/off? |
| */ |
| /** |
| * Show the Bus Power status |
| */ |
| static ssize_t buspower_show(struct device *_dev, |
| struct device_attribute *attr, char *buf) |
| { |
| #ifdef LM_INTERFACE |
| struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); |
| dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); |
| #elif defined(PCI_INTERFACE) |
| dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); |
| #else |
| dwc_otg_device_t *otg_dev = dev_get_platdata(_dev); |
| #endif |
| return sprintf(buf, "Bus Power = 0x%x\n", |
| dwc_otg_get_prtpower(otg_dev->core_if)); |
| } |
| |
| /** |
| * Set the Bus Power status |
| */ |
| static ssize_t buspower_store(struct device *_dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| #ifdef LM_INTERFACE |
| struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); |
| dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); |
| #elif defined(PCI_INTERFACE) |
| dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); |
| #else |
| dwc_otg_device_t *otg_dev = dev_get_platdata(_dev); |
| #endif |
| uint32_t on = simple_strtoul(buf, NULL, 16); |
| dwc_otg_set_prtpower(otg_dev->core_if, on); |
| return count; |
| } |
| |
| DEVICE_ATTR(buspower, 0644, buspower_show, buspower_store); |
| |
| /** |
| * @todo Need to do more for suspend? |
| */ |
| /** |
| * Show the Bus Suspend status |
| */ |
| static ssize_t bussuspend_show(struct device *_dev, |
| struct device_attribute *attr, char *buf) |
| { |
| #ifdef LM_INTERFACE |
| struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); |
| dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); |
| #elif defined(PCI_INTERFACE) |
| dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); |
| #else |
| dwc_otg_device_t *otg_dev = dev_get_platdata(_dev); |
| #endif |
| |
| return sprintf(buf, "Bus Suspend = 0x%x\n", |
| dwc_otg_get_prtsuspend(otg_dev->core_if)); |
| } |
| |
| /** |
| * Set the Bus Suspend status |
| */ |
| static ssize_t bussuspend_store(struct device *_dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| #ifdef LM_INTERFACE |
| struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); |
| dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); |
| #elif defined(PCI_INTERFACE) |
| dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); |
| #else |
| dwc_otg_device_t *otg_dev = dev_get_platdata(_dev); |
| #endif |
| |
| uint32_t in = simple_strtoul(buf, NULL, 16); |
| dwc_otg_set_prtsuspend(otg_dev->core_if, in); |
| return count; |
| } |
| |
| DEVICE_ATTR(bussuspend, 0644, bussuspend_show, bussuspend_store); |
| |
| /** |
| * Show the Mode Change Ready Timer status |
| */ |
| static ssize_t mode_ch_tim_en_show(struct device *_dev, |
| struct device_attribute *attr, char *buf) |
| { |
| #ifdef LM_INTERFACE |
| struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); |
| dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); |
| #elif defined(PCI_INTERFACE) |
| dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); |
| #else |
| dwc_otg_device_t *otg_dev = dev_get_platdata(_dev); |
| #endif |
| |
| return sprintf(buf, "Mode Change Ready Timer Enable = 0x%x\n", |
| dwc_otg_get_mode_ch_tim(otg_dev->core_if)); |
| } |
| |
| /** |
| * Set the Mode Change Ready Timer status |
| */ |
| static ssize_t mode_ch_tim_en_store(struct device *_dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| #ifdef LM_INTERFACE |
| struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); |
| dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); |
| #elif defined(PCI_INTERFACE) |
| dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); |
| #else |
| dwc_otg_device_t *otg_dev = dev_get_platdata(_dev); |
| #endif |
| |
| uint32_t in = simple_strtoul(buf, NULL, 16); |
| dwc_otg_set_mode_ch_tim(otg_dev->core_if, in); |
| return count; |
| } |
| |
| DEVICE_ATTR(mode_ch_tim_en, 0644, mode_ch_tim_en_show, mode_ch_tim_en_store); |
| |
| /** |
| * Show the value of HFIR Frame Interval bitfield |
| */ |
| static ssize_t fr_interval_show(struct device *_dev, |
| struct device_attribute *attr, char *buf) |
| { |
| #ifdef LM_INTERFACE |
| struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); |
| dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); |
| #elif defined(PCI_INTERFACE) |
| dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); |
| #else |
| dwc_otg_device_t *otg_dev = dev_get_platdata(_dev); |
| #endif |
| |
| return sprintf(buf, "Frame Interval = 0x%x\n", |
| dwc_otg_get_fr_interval(otg_dev->core_if)); |
| } |
| |
| /** |
| * Set the HFIR Frame Interval value |
| */ |
| static ssize_t fr_interval_store(struct device *_dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| #ifdef LM_INTERFACE |
| struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); |
| dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); |
| #elif defined(PCI_INTERFACE) |
| dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); |
| #else |
| dwc_otg_device_t *otg_dev = dev_get_platdata(_dev); |
| #endif |
| |
| uint32_t in = simple_strtoul(buf, NULL, 10); |
| dwc_otg_set_fr_interval(otg_dev->core_if, in); |
| return count; |
| } |
| |
| DEVICE_ATTR(fr_interval, 0644, fr_interval_show, fr_interval_store); |
| |
| /** |
| * Show the status of Remote Wakeup. |
| */ |
| static ssize_t remote_wakeup_show(struct device *_dev, |
| struct device_attribute *attr, char *buf) |
| { |
| #ifndef DWC_HOST_ONLY |
| #ifdef LM_INTERFACE |
| struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); |
| dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); |
| #elif defined(PCI_INTERFACE) |
| dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); |
| #else |
| dwc_otg_device_t *otg_dev = dev_get_platdata(_dev); |
| #endif |
| |
| return sprintf(buf, |
| "Remote Wakeup Sig = %d Enabled = %d LPM Remote Wakeup = %d\n", |
| dwc_otg_get_remotewakesig(otg_dev->core_if), |
| dwc_otg_pcd_get_rmwkup_enable(otg_dev->pcd), |
| dwc_otg_get_lpm_remotewakeenabled(otg_dev->core_if)); |
| #else |
| return sprintf(buf, "Host Only Mode!\n"); |
| #endif /* DWC_HOST_ONLY */ |
| } |
| |
| /** |
| * Initiate a remote wakeup of the host. The Device control register |
| * Remote Wakeup Signal bit is written if the PCD Remote wakeup enable |
| * flag is set. |
| * |
| */ |
| static ssize_t remote_wakeup_store(struct device *_dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| #ifndef DWC_HOST_ONLY |
| #ifdef LM_INTERFACE |
| struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); |
| dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); |
| #elif defined(PCI_INTERFACE) |
| dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); |
| #else |
| dwc_otg_device_t *otg_dev = dev_get_platdata(_dev); |
| #endif |
| |
| uint32_t val = simple_strtoul(buf, NULL, 16); |
| |
| if (val & 1) { |
| dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 1); |
| } else { |
| dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 0); |
| } |
| #endif /* DWC_HOST_ONLY */ |
| return count; |
| } |
| |
| DEVICE_ATTR(remote_wakeup, S_IRUGO | S_IWUSR, remote_wakeup_show, |
| remote_wakeup_store); |
| |
| /** |
| * Show the whether core is hibernated or not. |
| */ |
| static ssize_t rem_wakeup_pwrdn_show(struct device *_dev, |
| struct device_attribute *attr, char *buf) |
| { |
| #ifndef DWC_HOST_ONLY |
| #ifdef LM_INTERFACE |
| struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); |
| dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); |
| #elif defined(PCI_INTERFACE) |
| dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); |
| #else |
| dwc_otg_device_t *otg_dev = dev_get_platdata(_dev); |
| #endif |
| if (dwc_otg_get_core_state(otg_dev->core_if)) { |
| DWC_PRINTF("Core is in hibernation\n"); |
| } else { |
| DWC_PRINTF("Core is not in hibernation\n"); |
| } |
| #endif /* DWC_HOST_ONLY */ |
| return 0; |
| } |
| |
| extern int dwc_otg_device_hibernation_restore(dwc_otg_core_if_t * core_if, |
| int rem_wakeup, int reset); |
| |
| /** |
| * Initiate a remote wakeup of the device to exit from hibernation. |
| */ |
| static ssize_t rem_wakeup_pwrdn_store(struct device *_dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| #ifndef DWC_HOST_ONLY |
| #ifdef LM_INTERFACE |
| struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); |
| dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); |
| #elif defined(PCI_INTERFACE) |
| dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); |
| #else |
| dwc_otg_device_t *otg_dev = dev_get_platdata(_dev); |
| #endif |
| dwc_otg_device_hibernation_restore(otg_dev->core_if, 1, 0); |
| #endif |
| return count; |
| } |
| |
| DEVICE_ATTR(rem_wakeup_pwrdn, S_IRUGO | S_IWUSR, rem_wakeup_pwrdn_show, |
| rem_wakeup_pwrdn_store); |
| |
| static ssize_t disconnect_us(struct device *_dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| |
| #ifndef DWC_HOST_ONLY |
| #ifdef LM_INTERFACE |
| struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); |
| dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); |
| #elif defined(PCI_INTERFACE) |
| dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); |
| #else |
| dwc_otg_device_t *otg_dev = dev_get_platdata(_dev); |
| #endif |
| uint32_t val = simple_strtoul(buf, NULL, 16); |
| DWC_PRINTF("The Passed value is %04x\n", val); |
| |
| dwc_otg_pcd_disconnect_us(otg_dev->pcd, 50); |
| |
| #endif /* DWC_HOST_ONLY */ |
| return count; |
| } |
| |
| DEVICE_ATTR(disconnect_us, S_IWUSR, 0, disconnect_us); |
| |
| /** |
| * Dump global registers and either host or device registers (depending on the |
| * current mode of the core). |
| */ |
| static ssize_t regdump_show(struct device *_dev, |
| struct device_attribute *attr, char *buf) |
| { |
| #ifdef LM_INTERFACE |
| struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); |
| dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); |
| #elif defined(PCI_INTERFACE) |
| dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); |
| #else |
| dwc_otg_device_t *otg_dev = dev_get_platdata(_dev); |
| #endif |
| |
| dwc_otg_dump_global_registers(otg_dev->core_if); |
| if (dwc_otg_is_host_mode(otg_dev->core_if)) { |
| dwc_otg_dump_host_registers(otg_dev->core_if); |
| } else { |
| dwc_otg_dump_dev_registers(otg_dev->core_if); |
| |
| } |
| return sprintf(buf, "Register Dump\n"); |
| } |
| |
| DEVICE_ATTR(regdump, S_IRUGO | S_IWUSR, regdump_show, 0); |
| |
| /** |
| * Dump global registers and either host or device registers (depending on the |
| * current mode of the core). |
| */ |
| static ssize_t spramdump_show(struct device *_dev, |
| struct device_attribute *attr, char *buf) |
| { |
| #ifdef LM_INTERFACE |
| struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); |
| dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); |
| #elif defined(PCI_INTERFACE) |
| dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); |
| #else |
| dwc_otg_device_t *otg_dev = dev_get_platdata(_dev); |
| #endif |
| |
| dwc_otg_dump_spram(otg_dev->core_if); |
| |
| return sprintf(buf, "SPRAM Dump\n"); |
| } |
| |
| DEVICE_ATTR(spramdump, S_IRUGO | S_IWUSR, spramdump_show, 0); |
| |
| /** |
| * Dump the current hcd state. |
| */ |
| static ssize_t hcddump_show(struct device *_dev, |
| struct device_attribute *attr, char *buf) |
| { |
| #ifndef DWC_DEVICE_ONLY |
| #ifdef LM_INTERFACE |
| struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); |
| dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); |
| #elif defined(PCI_INTERFACE) |
| dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); |
| #else |
| dwc_otg_device_t *otg_dev = dev_get_platdata(_dev); |
| #endif |
| |
| dwc_otg_hcd_dump_state(otg_dev->hcd); |
| #endif /* DWC_DEVICE_ONLY */ |
| return sprintf(buf, "HCD Dump\n"); |
| } |
| |
| DEVICE_ATTR(hcddump, S_IRUGO | S_IWUSR, hcddump_show, 0); |
| |
| /** |
| * Dump the average frame remaining at SOF. This can be used to |
| * determine average interrupt latency. Frame remaining is also shown for |
| * start transfer and two additional sample points. |
| */ |
| static ssize_t hcd_frrem_show(struct device *_dev, |
| struct device_attribute *attr, char *buf) |
| { |
| #ifndef DWC_DEVICE_ONLY |
| #ifdef LM_INTERFACE |
| struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); |
| dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); |
| #elif defined(PCI_INTERFACE) |
| dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); |
| #else |
| dwc_otg_device_t *otg_dev = dev_get_platdata(_dev); |
| #endif |
| |
| dwc_otg_hcd_dump_frrem(otg_dev->hcd); |
| #endif /* DWC_DEVICE_ONLY */ |
| return sprintf(buf, "HCD Dump Frame Remaining\n"); |
| } |
| |
| DEVICE_ATTR(hcd_frrem, S_IRUGO | S_IWUSR, hcd_frrem_show, 0); |
| |
| /** |
| * Displays the time required to read the GNPTXFSIZ register many times (the |
| * output shows the number of times the register is read). |
| */ |
| #define RW_REG_COUNT 10000000 |
| #define MSEC_PER_JIFFIE 1000/HZ |
| static ssize_t rd_reg_test_show(struct device *_dev, |
| struct device_attribute *attr, char *buf) |
| { |
| #ifdef LM_INTERFACE |
| struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); |
| dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); |
| #elif defined(PCI_INTERFACE) |
| dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); |
| #else |
| dwc_otg_device_t *otg_dev = dev_get_platdata(_dev); |
| #endif |
| |
| int i; |
| int time; |
| int start_jiffies; |
| |
| printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n", |
| HZ, MSEC_PER_JIFFIE, loops_per_jiffy); |
| start_jiffies = jiffies; |
| for (i = 0; i < RW_REG_COUNT; i++) { |
| dwc_otg_get_gnptxfsiz(otg_dev->core_if); |
| } |
| time = jiffies - start_jiffies; |
| return sprintf(buf, |
| "Time to read GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n", |
| RW_REG_COUNT, time * MSEC_PER_JIFFIE, time); |
| } |
| |
| DEVICE_ATTR(rd_reg_test, S_IRUGO | S_IWUSR, rd_reg_test_show, 0); |
| |
| /** |
| * Displays the time required to write the GNPTXFSIZ register many times (the |
| * output shows the number of times the register is written). |
| */ |
| static ssize_t wr_reg_test_show(struct device *_dev, |
| struct device_attribute *attr, char *buf) |
| { |
| #ifdef LM_INTERFACE |
| struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); |
| dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); |
| #elif defined(PCI_INTERFACE) |
| dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); |
| #else |
| dwc_otg_device_t *otg_dev = dev_get_platdata(_dev); |
| #endif |
| |
| |
| uint32_t reg_val; |
| int i; |
| int time; |
| int start_jiffies; |
| |
| printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n", |
| HZ, MSEC_PER_JIFFIE, loops_per_jiffy); |
| reg_val = dwc_otg_get_gnptxfsiz(otg_dev->core_if); |
| start_jiffies = jiffies; |
| for (i = 0; i < RW_REG_COUNT; i++) { |
| dwc_otg_set_gnptxfsiz(otg_dev->core_if, reg_val); |
| } |
| time = jiffies - start_jiffies; |
| return sprintf(buf, |
| "Time to write GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n", |
| RW_REG_COUNT, time * MSEC_PER_JIFFIE, time); |
| } |
| |
| DEVICE_ATTR(wr_reg_test, S_IRUGO | S_IWUSR, wr_reg_test_show, 0); |
| |
| #ifdef CONFIG_USB_DWC_OTG_LPM |
| |
| /** |
| * Show the lpm_response attribute. |
| */ |
| static ssize_t lpmresp_show(struct device *_dev, |
| struct device_attribute *attr, char *buf) |
| { |
| #ifdef LM_INTERFACE |
| struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); |
| dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); |
| #elif defined(PCI_INTERFACE) |
| dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); |
| #else |
| dwc_otg_device_t *otg_dev = dev_get_platdata(_dev); |
| #endif |
| |
| |
| if (!dwc_otg_get_param_lpm_enable(otg_dev->core_if)) |
| return sprintf(buf, "** LPM is DISABLED **\n"); |
| |
| if (!dwc_otg_is_device_mode(otg_dev->core_if)) { |
| return sprintf(buf, "** Current mode is not device mode\n"); |
| } |
| return sprintf(buf, "lpm_response = %d\n", |
| dwc_otg_get_lpmresponse(otg_dev->core_if)); |
| } |
| |
| /** |
| * Store the lpm_response attribute. |
| */ |
| static ssize_t lpmresp_store(struct device *_dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| #ifdef LM_INTERFACE |
| struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); |
| dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); |
| #elif defined(PCI_INTERFACE) |
| dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); |
| #else |
| dwc_otg_device_t *otg_dev = dev_get_platdata(_dev); |
| #endif |
| |
| |
| uint32_t val = simple_strtoul(buf, NULL, 16); |
| |
| if (!dwc_otg_get_param_lpm_enable(otg_dev->core_if)) { |
| return 0; |
| } |
| |
| if (!dwc_otg_is_device_mode(otg_dev->core_if)) { |
| return 0; |
| } |
| |
| dwc_otg_set_lpmresponse(otg_dev->core_if, val); |
| return count; |
| } |
| |
| DEVICE_ATTR(lpm_response, S_IRUGO | S_IWUSR, lpmresp_show, lpmresp_store); |
| |
| /** |
| * Show the sleep_status attribute. |
| */ |
| static ssize_t sleepstatus_show(struct device *_dev, |
| struct device_attribute *attr, char *buf) |
| { |
| #ifdef LM_INTERFACE |
| struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); |
| dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); |
| #elif defined(PCI_INTERFACE) |
| dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); |
| #else |
| dwc_otg_device_t *otg_dev = dev_get_platdata(_dev); |
| #endif |
| |
| |
| return sprintf(buf, "Sleep Status = %d\n", |
| dwc_otg_get_lpm_portsleepstatus(otg_dev->core_if)); |
| } |
| |
| /** |
| * Store the sleep_status attribure. |
| */ |
| static ssize_t sleepstatus_store(struct device *_dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| #ifdef LM_INTERFACE |
| struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); |
| dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); |
| #elif defined(PCI_INTERFACE) |
| dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); |
| #else |
| dwc_otg_device_t *otg_dev = dev_get_platdata(_dev); |
| #endif |
| |
| |
| dwc_otg_core_if_t *core_if = otg_dev->core_if; |
| |
| if (dwc_otg_get_lpm_portsleepstatus(otg_dev->core_if)) { |
| if (dwc_otg_is_host_mode(core_if)) { |
| |
| DWC_PRINTF("Host initiated resume\n"); |
| dwc_otg_set_prtresume(otg_dev->core_if, 1); |
| } |
| } |
| |
| return count; |
| } |
| |
| DEVICE_ATTR(sleep_status, S_IRUGO | S_IWUSR, sleepstatus_show, |
| sleepstatus_store); |
| |
| #endif /* CONFIG_USB_DWC_OTG_LPM_ENABLE */ |
| |
| /**@}*/ |
| |
| /** |
| * Create the device files |
| */ |
| void dwc_otg_attr_create( |
| #ifdef LM_INTERFACE |
| struct lm_device *dev |
| #elif defined(PCI_INTERFACE) |
| struct pci_dev *dev |
| #else |
| // struct device *dev |
| struct platform_device *dev |
| #endif |
| |
| ) |
| { |
| int error; |
| |
| error = device_create_file(&dev->dev, &dev_attr_regoffset); |
| error = device_create_file(&dev->dev, &dev_attr_regvalue); |
| error = device_create_file(&dev->dev, &dev_attr_mode); |
| error = device_create_file(&dev->dev, &dev_attr_hnpcapable); |
| error = device_create_file(&dev->dev, &dev_attr_srpcapable); |
| error = device_create_file(&dev->dev, &dev_attr_hsic_connect); |
| error = device_create_file(&dev->dev, &dev_attr_inv_sel_hsic); |
| error = device_create_file(&dev->dev, &dev_attr_hnp); |
| error = device_create_file(&dev->dev, &dev_attr_srp); |
| error = device_create_file(&dev->dev, &dev_attr_buspower); |
| error = device_create_file(&dev->dev, &dev_attr_bussuspend); |
| error = device_create_file(&dev->dev, &dev_attr_mode_ch_tim_en); |
| error = device_create_file(&dev->dev, &dev_attr_fr_interval); |
| error = device_create_file(&dev->dev, &dev_attr_busconnected); |
| error = device_create_file(&dev->dev, &dev_attr_gotgctl); |
| error = device_create_file(&dev->dev, &dev_attr_gusbcfg); |
| error = device_create_file(&dev->dev, &dev_attr_grxfsiz); |
| error = device_create_file(&dev->dev, &dev_attr_gnptxfsiz); |
| error = device_create_file(&dev->dev, &dev_attr_gpvndctl); |
| error = device_create_file(&dev->dev, &dev_attr_ggpio); |
| error = device_create_file(&dev->dev, &dev_attr_guid); |
| error = device_create_file(&dev->dev, &dev_attr_gsnpsid); |
| error = device_create_file(&dev->dev, &dev_attr_devspeed); |
| error = device_create_file(&dev->dev, &dev_attr_enumspeed); |
| error = device_create_file(&dev->dev, &dev_attr_hptxfsiz); |
| error = device_create_file(&dev->dev, &dev_attr_hprt0); |
| error = device_create_file(&dev->dev, &dev_attr_remote_wakeup); |
| error = device_create_file(&dev->dev, &dev_attr_rem_wakeup_pwrdn); |
| error = device_create_file(&dev->dev, &dev_attr_disconnect_us); |
| error = device_create_file(&dev->dev, &dev_attr_regdump); |
| error = device_create_file(&dev->dev, &dev_attr_spramdump); |
| error = device_create_file(&dev->dev, &dev_attr_hcddump); |
| error = device_create_file(&dev->dev, &dev_attr_hcd_frrem); |
| error = device_create_file(&dev->dev, &dev_attr_rd_reg_test); |
| error = device_create_file(&dev->dev, &dev_attr_wr_reg_test); |
| #ifdef CONFIG_USB_DWC_OTG_LPM |
| error = device_create_file(&dev->dev, &dev_attr_lpm_response); |
| error = device_create_file(&dev->dev, &dev_attr_sleep_status); |
| #endif |
| } |
| |
| /** |
| * Remove the device files |
| */ |
| void dwc_otg_attr_remove( |
| #ifdef LM_INTERFACE |
| struct lm_device *dev |
| #elif defined(PCI_INTERFACE) |
| struct pci_dev *dev |
| #else |
| //struct device *dev |
| struct platform_device *dev |
| #endif |
| |
| ) |
| { |
| device_remove_file(&dev->dev, &dev_attr_regoffset); |
| device_remove_file(&dev->dev, &dev_attr_regvalue); |
| device_remove_file(&dev->dev, &dev_attr_mode); |
| device_remove_file(&dev->dev, &dev_attr_hnpcapable); |
| device_remove_file(&dev->dev, &dev_attr_srpcapable); |
| device_remove_file(&dev->dev, &dev_attr_hsic_connect); |
| device_remove_file(&dev->dev, &dev_attr_inv_sel_hsic); |
| device_remove_file(&dev->dev, &dev_attr_hnp); |
| device_remove_file(&dev->dev, &dev_attr_srp); |
| device_remove_file(&dev->dev, &dev_attr_buspower); |
| device_remove_file(&dev->dev, &dev_attr_bussuspend); |
| device_remove_file(&dev->dev, &dev_attr_mode_ch_tim_en); |
| device_remove_file(&dev->dev, &dev_attr_fr_interval); |
| device_remove_file(&dev->dev, &dev_attr_busconnected); |
| device_remove_file(&dev->dev, &dev_attr_gotgctl); |
| device_remove_file(&dev->dev, &dev_attr_gusbcfg); |
| device_remove_file(&dev->dev, &dev_attr_grxfsiz); |
| device_remove_file(&dev->dev, &dev_attr_gnptxfsiz); |
| device_remove_file(&dev->dev, &dev_attr_gpvndctl); |
| device_remove_file(&dev->dev, &dev_attr_ggpio); |
| device_remove_file(&dev->dev, &dev_attr_guid); |
| device_remove_file(&dev->dev, &dev_attr_gsnpsid); |
| device_remove_file(&dev->dev, &dev_attr_devspeed); |
| device_remove_file(&dev->dev, &dev_attr_enumspeed); |
| device_remove_file(&dev->dev, &dev_attr_hptxfsiz); |
| device_remove_file(&dev->dev, &dev_attr_hprt0); |
| device_remove_file(&dev->dev, &dev_attr_remote_wakeup); |
| device_remove_file(&dev->dev, &dev_attr_rem_wakeup_pwrdn); |
| device_remove_file(&dev->dev, &dev_attr_disconnect_us); |
| device_remove_file(&dev->dev, &dev_attr_regdump); |
| device_remove_file(&dev->dev, &dev_attr_spramdump); |
| device_remove_file(&dev->dev, &dev_attr_hcddump); |
| device_remove_file(&dev->dev, &dev_attr_hcd_frrem); |
| device_remove_file(&dev->dev, &dev_attr_rd_reg_test); |
| device_remove_file(&dev->dev, &dev_attr_wr_reg_test); |
| #ifdef CONFIG_USB_DWC_OTG_LPM |
| device_remove_file(&dev->dev, &dev_attr_lpm_response); |
| device_remove_file(&dev->dev, &dev_attr_sleep_status); |
| #endif |
| } |