drivers/net/ethernet/sfc/tenxpress.c - kernel/mindspeed - Git at Google

 /****************************************************************************
  * Driver for Solarflare Solarstorm network controllers and boards
  * Copyright 2007-2011 Solarflare Communications Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License version 2 as published
  * by the Free Software Foundation, incorporated herein by reference.
  */

 #include <linux/delay.h>
 #include <linux/rtnetlink.h>
 #include <linux/seq_file.h>
 #include <linux/slab.h>
 #include "efx.h"
 #include "mdio_10g.h"
 #include "nic.h"
 #include "phy.h"
 #include "workarounds.h"

 /* We expect these MMDs to be in the package. */
 #define TENXPRESS_REQUIRED_DEVS (MDIO_DEVS_PMAPMD	| \
 				 MDIO_DEVS_PCS		| \
 				 MDIO_DEVS_PHYXS	| \
 				 MDIO_DEVS_AN)

 #define SFX7101_LOOPBACKS ((1 << LOOPBACK_PHYXS) |	\
 			   (1 << LOOPBACK_PCS) |	\
 			   (1 << LOOPBACK_PMAPMD) |	\
 			   (1 << LOOPBACK_PHYXS_WS))

 /* We complain if we fail to see the link partner as 10G capable this many
  * times in a row (must be > 1 as sampling the autoneg. registers is racy)
  */
 #define MAX_BAD_LP_TRIES	(5)

 /* Extended control register */
 #define PMA_PMD_XCONTROL_REG	49152
 #define PMA_PMD_EXT_GMII_EN_LBN	1
 #define PMA_PMD_EXT_GMII_EN_WIDTH 1
 #define PMA_PMD_EXT_CLK_OUT_LBN	2
 #define PMA_PMD_EXT_CLK_OUT_WIDTH 1
 #define PMA_PMD_LNPGA_POWERDOWN_LBN 8
 #define PMA_PMD_LNPGA_POWERDOWN_WIDTH 1
 #define PMA_PMD_EXT_CLK312_WIDTH 1
 #define PMA_PMD_EXT_LPOWER_LBN  12
 #define PMA_PMD_EXT_LPOWER_WIDTH 1
 #define PMA_PMD_EXT_ROBUST_LBN	14
 #define PMA_PMD_EXT_ROBUST_WIDTH 1
 #define PMA_PMD_EXT_SSR_LBN	15
 #define PMA_PMD_EXT_SSR_WIDTH	1

 /* extended status register */
 #define PMA_PMD_XSTATUS_REG	49153
 #define PMA_PMD_XSTAT_MDIX_LBN	14
 #define PMA_PMD_XSTAT_FLP_LBN   (12)

 /* LED control register */
 #define PMA_PMD_LED_CTRL_REG	49159
 #define PMA_PMA_LED_ACTIVITY_LBN	(3)

 /* LED function override register */
 #define PMA_PMD_LED_OVERR_REG	49161
 /* Bit positions for different LEDs (there are more but not wired on SFE4001)*/
 #define PMA_PMD_LED_LINK_LBN	(0)
 #define PMA_PMD_LED_SPEED_LBN	(2)
 #define PMA_PMD_LED_TX_LBN	(4)
 #define PMA_PMD_LED_RX_LBN	(6)
 /* Override settings */
 #define	PMA_PMD_LED_AUTO	(0)	/* H/W control */
 #define	PMA_PMD_LED_ON		(1)
 #define	PMA_PMD_LED_OFF		(2)
 #define PMA_PMD_LED_FLASH	(3)
 #define PMA_PMD_LED_MASK	3
 /* All LEDs under hardware control */
 /* Green and Amber under hardware control, Red off */
 #define SFX7101_PMA_PMD_LED_DEFAULT (PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN)

 #define PMA_PMD_SPEED_ENABLE_REG 49192
 #define PMA_PMD_100TX_ADV_LBN    1
 #define PMA_PMD_100TX_ADV_WIDTH  1
 #define PMA_PMD_1000T_ADV_LBN    2
 #define PMA_PMD_1000T_ADV_WIDTH  1
 #define PMA_PMD_10000T_ADV_LBN   3
 #define PMA_PMD_10000T_ADV_WIDTH 1
 #define PMA_PMD_SPEED_LBN        4
 #define PMA_PMD_SPEED_WIDTH      4

 /* Misc register defines */
 #define PCS_CLOCK_CTRL_REG	55297
 #define PLL312_RST_N_LBN 2

 #define PCS_SOFT_RST2_REG	55302
 #define SERDES_RST_N_LBN 13
 #define XGXS_RST_N_LBN 12

 #define	PCS_TEST_SELECT_REG	55303	/* PRM 10.5.8 */
 #define	CLK312_EN_LBN 3

 /* PHYXS registers */
 #define PHYXS_XCONTROL_REG	49152
 #define PHYXS_RESET_LBN		15
 #define PHYXS_RESET_WIDTH	1

 #define PHYXS_TEST1         (49162)
 #define LOOPBACK_NEAR_LBN   (8)
 #define LOOPBACK_NEAR_WIDTH (1)

 /* Boot status register */
 #define PCS_BOOT_STATUS_REG		53248
 #define PCS_BOOT_FATAL_ERROR_LBN	0
 #define PCS_BOOT_PROGRESS_LBN		1
 #define PCS_BOOT_PROGRESS_WIDTH		2
 #define PCS_BOOT_PROGRESS_INIT		0
 #define PCS_BOOT_PROGRESS_WAIT_MDIO	1
 #define PCS_BOOT_PROGRESS_CHECKSUM	2
 #define PCS_BOOT_PROGRESS_JUMP		3
 #define PCS_BOOT_DOWNLOAD_WAIT_LBN	3
 #define PCS_BOOT_CODE_STARTED_LBN	4

 /* 100M/1G PHY registers */
 #define GPHY_XCONTROL_REG	49152
 #define GPHY_ISOLATE_LBN	10
 #define GPHY_ISOLATE_WIDTH	1
 #define GPHY_DUPLEX_LBN	  	8
 #define GPHY_DUPLEX_WIDTH	1
 #define GPHY_LOOPBACK_NEAR_LBN	14
 #define GPHY_LOOPBACK_NEAR_WIDTH 1

 #define C22EXT_STATUS_REG       49153
 #define C22EXT_STATUS_LINK_LBN  2
 #define C22EXT_STATUS_LINK_WIDTH 1

 #define C22EXT_MSTSLV_CTRL			49161
 #define C22EXT_MSTSLV_CTRL_ADV_1000_HD_LBN	8
 #define C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN	9

 #define C22EXT_MSTSLV_STATUS			49162
 #define C22EXT_MSTSLV_STATUS_LP_1000_HD_LBN	10
 #define C22EXT_MSTSLV_STATUS_LP_1000_FD_LBN	11

 /* Time to wait between powering down the LNPGA and turning off the power
  * rails */
 #define LNPGA_PDOWN_WAIT	(HZ / 5)

 struct tenxpress_phy_data {
 	enum efx_loopback_mode loopback_mode;
 	enum efx_phy_mode phy_mode;
 	int bad_lp_tries;
 };

 static int tenxpress_init(struct efx_nic *efx)
 {
 	/* Enable 312.5 MHz clock */
 	efx_mdio_write(efx, MDIO_MMD_PCS, PCS_TEST_SELECT_REG,
 		       1 << CLK312_EN_LBN);

 	/* Set the LEDs up as: Green = Link, Amber = Link/Act, Red = Off */
 	efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, PMA_PMD_LED_CTRL_REG,
 			  1 << PMA_PMA_LED_ACTIVITY_LBN, true);
 	efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_LED_OVERR_REG,
 		       SFX7101_PMA_PMD_LED_DEFAULT);

 	return 0;
 }

 static int tenxpress_phy_probe(struct efx_nic *efx)
 {
 	struct tenxpress_phy_data *phy_data;

 	/* Allocate phy private storage */
 	phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL);
 	if (!phy_data)
 		return -ENOMEM;
 	efx->phy_data = phy_data;
 	phy_data->phy_mode = efx->phy_mode;

 	efx->mdio.mmds = TENXPRESS_REQUIRED_DEVS;
 	efx->mdio.mode_support = MDIO_SUPPORTS_C45;

 	efx->loopback_modes = SFX7101_LOOPBACKS | FALCON_XMAC_LOOPBACKS;

 	efx->link_advertising = (ADVERTISED_TP | ADVERTISED_Autoneg |
 				 ADVERTISED_10000baseT_Full);

 	return 0;
 }

 static int tenxpress_phy_init(struct efx_nic *efx)
 {
 	int rc;

 	falcon_board(efx)->type->init_phy(efx);

 	if (!(efx->phy_mode & PHY_MODE_SPECIAL)) {
 		rc = efx_mdio_wait_reset_mmds(efx, TENXPRESS_REQUIRED_DEVS);
 		if (rc < 0)
 			return rc;

 		rc = efx_mdio_check_mmds(efx, TENXPRESS_REQUIRED_DEVS);
 		if (rc < 0)
 			return rc;
 	}

 	rc = tenxpress_init(efx);
 	if (rc < 0)
 		return rc;

 	/* Reinitialise flow control settings */
 	efx_link_set_wanted_fc(efx, efx->wanted_fc);
 	efx_mdio_an_reconfigure(efx);

 	schedule_timeout_uninterruptible(HZ / 5); /* 200ms */

 	/* Let XGXS and SerDes out of reset */
 	falcon_reset_xaui(efx);

 	return 0;
 }

 /* Perform a "special software reset" on the PHY. The caller is
  * responsible for saving and restoring the PHY hardware registers
  * properly, and masking/unmasking LASI */
 static int tenxpress_special_reset(struct efx_nic *efx)
 {
 	int rc, reg;

 	/* The XGMAC clock is driven from the SFX7101 312MHz clock, so
 	 * a special software reset can glitch the XGMAC sufficiently for stats
 	 * requests to fail. */
 	falcon_stop_nic_stats(efx);

 	/* Initiate reset */
 	reg = efx_mdio_read(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG);
 	reg |= (1 << PMA_PMD_EXT_SSR_LBN);
 	efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG, reg);

 	mdelay(200);

 	/* Wait for the blocks to come out of reset */
 	rc = efx_mdio_wait_reset_mmds(efx, TENXPRESS_REQUIRED_DEVS);
 	if (rc < 0)
 		goto out;

 	/* Try and reconfigure the device */
 	rc = tenxpress_init(efx);
 	if (rc < 0)
 		goto out;

 	/* Wait for the XGXS state machine to churn */
 	mdelay(10);
 out:
 	falcon_start_nic_stats(efx);
 	return rc;
 }

 static void sfx7101_check_bad_lp(struct efx_nic *efx, bool link_ok)
 {
 	struct tenxpress_phy_data *pd = efx->phy_data;
 	bool bad_lp;
 	int reg;

 	if (link_ok) {
 		bad_lp = false;
 	} else {
 		/* Check that AN has started but not completed. */
 		reg = efx_mdio_read(efx, MDIO_MMD_AN, MDIO_STAT1);
 		if (!(reg & MDIO_AN_STAT1_LPABLE))
 			return; /* LP status is unknown */
 		bad_lp = !(reg & MDIO_AN_STAT1_COMPLETE);
 		if (bad_lp)
 			pd->bad_lp_tries++;
 	}

 	/* Nothing to do if all is well and was previously so. */
 	if (!pd->bad_lp_tries)
 		return;

 	/* Use the RX (red) LED as an error indicator once we've seen AN
 	 * failure several times in a row, and also log a message. */
 	if (!bad_lp || pd->bad_lp_tries == MAX_BAD_LP_TRIES) {
 		reg = efx_mdio_read(efx, MDIO_MMD_PMAPMD,
 				    PMA_PMD_LED_OVERR_REG);
 		reg &= ~(PMA_PMD_LED_MASK << PMA_PMD_LED_RX_LBN);
 		if (!bad_lp) {
 			reg |= PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN;
 		} else {
 			reg |= PMA_PMD_LED_FLASH << PMA_PMD_LED_RX_LBN;
 			netif_err(efx, link, efx->net_dev,
 				  "appears to be plugged into a port"
 				  " that is not 10GBASE-T capable. The PHY"
 				  " supports 10GBASE-T ONLY, so no link can"
 				  " be established\n");
 		}
 		efx_mdio_write(efx, MDIO_MMD_PMAPMD,
 			       PMA_PMD_LED_OVERR_REG, reg);
 		pd->bad_lp_tries = bad_lp;
 	}
 }

 static bool sfx7101_link_ok(struct efx_nic *efx)
 {
 	return efx_mdio_links_ok(efx,
 				 MDIO_DEVS_PMAPMD |
 				 MDIO_DEVS_PCS |
 				 MDIO_DEVS_PHYXS);
 }

 static void tenxpress_ext_loopback(struct efx_nic *efx)
 {
 	efx_mdio_set_flag(efx, MDIO_MMD_PHYXS, PHYXS_TEST1,
 			  1 << LOOPBACK_NEAR_LBN,
 			  efx->loopback_mode == LOOPBACK_PHYXS);
 }

 static void tenxpress_low_power(struct efx_nic *efx)
 {
 	efx_mdio_set_mmds_lpower(
 		efx, !!(efx->phy_mode & PHY_MODE_LOW_POWER),
 		TENXPRESS_REQUIRED_DEVS);
 }

 static int tenxpress_phy_reconfigure(struct efx_nic *efx)
 {
 	struct tenxpress_phy_data *phy_data = efx->phy_data;
 	bool phy_mode_change, loop_reset;

 	if (efx->phy_mode & (PHY_MODE_OFF | PHY_MODE_SPECIAL)) {
 		phy_data->phy_mode = efx->phy_mode;
 		return 0;
 	}

 	phy_mode_change = (efx->phy_mode == PHY_MODE_NORMAL &&
 			   phy_data->phy_mode != PHY_MODE_NORMAL);
 	loop_reset = (LOOPBACK_OUT_OF(phy_data, efx, LOOPBACKS_EXTERNAL(efx)) ||
 		      LOOPBACK_CHANGED(phy_data, efx, 1 << LOOPBACK_GPHY));

 	if (loop_reset || phy_mode_change) {
 		tenxpress_special_reset(efx);
 		falcon_reset_xaui(efx);
 	}

 	tenxpress_low_power(efx);
 	efx_mdio_transmit_disable(efx);
 	efx_mdio_phy_reconfigure(efx);
 	tenxpress_ext_loopback(efx);
 	efx_mdio_an_reconfigure(efx);

 	phy_data->loopback_mode = efx->loopback_mode;
 	phy_data->phy_mode = efx->phy_mode;

 	return 0;
 }

 static void
 tenxpress_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd);

 /* Poll for link state changes */
 static bool tenxpress_phy_poll(struct efx_nic *efx)
 {
 	struct efx_link_state old_state = efx->link_state;

 	efx->link_state.up = sfx7101_link_ok(efx);
 	efx->link_state.speed = 10000;
 	efx->link_state.fd = true;
 	efx->link_state.fc = efx_mdio_get_pause(efx);

 	sfx7101_check_bad_lp(efx, efx->link_state.up);

 	return !efx_link_state_equal(&efx->link_state, &old_state);
 }

 static void sfx7101_phy_fini(struct efx_nic *efx)
 {
 	int reg;

 	/* Power down the LNPGA */
 	reg = (1 << PMA_PMD_LNPGA_POWERDOWN_LBN);
 	efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG, reg);

 	/* Waiting here ensures that the board fini, which can turn
 	 * off the power to the PHY, won't get run until the LNPGA
 	 * powerdown has been given long enough to complete. */
 	schedule_timeout_uninterruptible(LNPGA_PDOWN_WAIT); /* 200 ms */
 }

 static void tenxpress_phy_remove(struct efx_nic *efx)
 {
 	kfree(efx->phy_data);
 	efx->phy_data = NULL;
 }


 /* Override the RX, TX and link LEDs */
 void tenxpress_set_id_led(struct efx_nic *efx, enum efx_led_mode mode)
 {
 	int reg;

 	switch (mode) {
 	case EFX_LED_OFF:
 		reg = (PMA_PMD_LED_OFF << PMA_PMD_LED_TX_LBN) |
 			(PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN) |
 			(PMA_PMD_LED_OFF << PMA_PMD_LED_LINK_LBN);
 		break;
 	case EFX_LED_ON:
 		reg = (PMA_PMD_LED_ON << PMA_PMD_LED_TX_LBN) |
 			(PMA_PMD_LED_ON << PMA_PMD_LED_RX_LBN) |
 			(PMA_PMD_LED_ON << PMA_PMD_LED_LINK_LBN);
 		break;
 	default:
 		reg = SFX7101_PMA_PMD_LED_DEFAULT;
 		break;
 	}

 	efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_LED_OVERR_REG, reg);
 }

 static const char *const sfx7101_test_names[] = {
 	"bist"
 };

 static const char *sfx7101_test_name(struct efx_nic *efx, unsigned int index)
 {
 	if (index < ARRAY_SIZE(sfx7101_test_names))
 		return sfx7101_test_names[index];
 	return NULL;
 }

 static int
 sfx7101_run_tests(struct efx_nic *efx, int *results, unsigned flags)
 {
 	int rc;

 	if (!(flags & ETH_TEST_FL_OFFLINE))
 		return 0;

 	/* BIST is automatically run after a special software reset */
 	rc = tenxpress_special_reset(efx);
 	results[0] = rc ? -1 : 1;

 	efx_mdio_an_reconfigure(efx);

 	return rc;
 }

 static void
 tenxpress_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
 {
 	u32 adv = 0, lpa = 0;
 	int reg;

 	reg = efx_mdio_read(efx, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL);
 	if (reg & MDIO_AN_10GBT_CTRL_ADV10G)
 		adv |= ADVERTISED_10000baseT_Full;
 	reg = efx_mdio_read(efx, MDIO_MMD_AN, MDIO_AN_10GBT_STAT);
 	if (reg & MDIO_AN_10GBT_STAT_LP10G)
 		lpa |= ADVERTISED_10000baseT_Full;

 	mdio45_ethtool_gset_npage(&efx->mdio, ecmd, adv, lpa);

 	/* In loopback, the PHY automatically brings up the correct interface,
 	 * but doesn't advertise the correct speed. So override it */
 	if (LOOPBACK_EXTERNAL(efx))
 		ethtool_cmd_speed_set(ecmd, SPEED_10000);
 }

 static int tenxpress_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
 {
 	if (!ecmd->autoneg)
 		return -EINVAL;

 	return efx_mdio_set_settings(efx, ecmd);
 }

 static void sfx7101_set_npage_adv(struct efx_nic *efx, u32 advertising)
 {
 	efx_mdio_set_flag(efx, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
 			  MDIO_AN_10GBT_CTRL_ADV10G,
 			  advertising & ADVERTISED_10000baseT_Full);
 }

 const struct efx_phy_operations falcon_sfx7101_phy_ops = {
 	.probe		  = tenxpress_phy_probe,
 	.init             = tenxpress_phy_init,
 	.reconfigure      = tenxpress_phy_reconfigure,
 	.poll             = tenxpress_phy_poll,
 	.fini             = sfx7101_phy_fini,
 	.remove		  = tenxpress_phy_remove,
 	.get_settings	  = tenxpress_get_settings,
 	.set_settings	  = tenxpress_set_settings,
 	.set_npage_adv    = sfx7101_set_npage_adv,
 	.test_alive	  = efx_mdio_test_alive,
 	.test_name	  = sfx7101_test_name,
 	.run_tests	  = sfx7101_run_tests,
 };
	/****************************************************************************
	* Driver for Solarflare Solarstorm network controllers and boards
	* Copyright 2007-2011 Solarflare Communications Inc.
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms of the GNU General Public License version 2 as published
	* by the Free Software Foundation, incorporated herein by reference.
	*/

	#include <linux/delay.h>
	#include <linux/rtnetlink.h>
	#include <linux/seq_file.h>
	#include <linux/slab.h>
	#include "efx.h"
	#include "mdio_10g.h"
	#include "nic.h"
	#include "phy.h"
	#include "workarounds.h"

	/* We expect these MMDs to be in the package. */
	#define TENXPRESS_REQUIRED_DEVS (MDIO_DEVS_PMAPMD \| \
	MDIO_DEVS_PCS \| \
	MDIO_DEVS_PHYXS \| \
	MDIO_DEVS_AN)

	#define SFX7101_LOOPBACKS ((1 << LOOPBACK_PHYXS) \| \
	(1 << LOOPBACK_PCS) \| \
	(1 << LOOPBACK_PMAPMD) \| \
	(1 << LOOPBACK_PHYXS_WS))

	/* We complain if we fail to see the link partner as 10G capable this many
	* times in a row (must be > 1 as sampling the autoneg. registers is racy)
	*/
	#define MAX_BAD_LP_TRIES (5)

	/* Extended control register */
	#define PMA_PMD_XCONTROL_REG 49152
	#define PMA_PMD_EXT_GMII_EN_LBN 1
	#define PMA_PMD_EXT_GMII_EN_WIDTH 1
	#define PMA_PMD_EXT_CLK_OUT_LBN 2
	#define PMA_PMD_EXT_CLK_OUT_WIDTH 1
	#define PMA_PMD_LNPGA_POWERDOWN_LBN 8
	#define PMA_PMD_LNPGA_POWERDOWN_WIDTH 1
	#define PMA_PMD_EXT_CLK312_WIDTH 1
	#define PMA_PMD_EXT_LPOWER_LBN 12
	#define PMA_PMD_EXT_LPOWER_WIDTH 1
	#define PMA_PMD_EXT_ROBUST_LBN 14
	#define PMA_PMD_EXT_ROBUST_WIDTH 1
	#define PMA_PMD_EXT_SSR_LBN 15
	#define PMA_PMD_EXT_SSR_WIDTH 1

	/* extended status register */
	#define PMA_PMD_XSTATUS_REG 49153
	#define PMA_PMD_XSTAT_MDIX_LBN 14
	#define PMA_PMD_XSTAT_FLP_LBN (12)

	/* LED control register */
	#define PMA_PMD_LED_CTRL_REG 49159
	#define PMA_PMA_LED_ACTIVITY_LBN (3)

	/* LED function override register */
	#define PMA_PMD_LED_OVERR_REG 49161
	/* Bit positions for different LEDs (there are more but not wired on SFE4001)*/
	#define PMA_PMD_LED_LINK_LBN (0)
	#define PMA_PMD_LED_SPEED_LBN (2)
	#define PMA_PMD_LED_TX_LBN (4)
	#define PMA_PMD_LED_RX_LBN (6)
	/* Override settings */
	#define PMA_PMD_LED_AUTO (0) /* H/W control */
	#define PMA_PMD_LED_ON (1)
	#define PMA_PMD_LED_OFF (2)
	#define PMA_PMD_LED_FLASH (3)
	#define PMA_PMD_LED_MASK 3
	/* All LEDs under hardware control */
	/* Green and Amber under hardware control, Red off */
	#define SFX7101_PMA_PMD_LED_DEFAULT (PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN)

	#define PMA_PMD_SPEED_ENABLE_REG 49192
	#define PMA_PMD_100TX_ADV_LBN 1
	#define PMA_PMD_100TX_ADV_WIDTH 1
	#define PMA_PMD_1000T_ADV_LBN 2
	#define PMA_PMD_1000T_ADV_WIDTH 1
	#define PMA_PMD_10000T_ADV_LBN 3
	#define PMA_PMD_10000T_ADV_WIDTH 1
	#define PMA_PMD_SPEED_LBN 4
	#define PMA_PMD_SPEED_WIDTH 4

	/* Misc register defines */
	#define PCS_CLOCK_CTRL_REG 55297
	#define PLL312_RST_N_LBN 2

	#define PCS_SOFT_RST2_REG 55302
	#define SERDES_RST_N_LBN 13
	#define XGXS_RST_N_LBN 12

	#define PCS_TEST_SELECT_REG 55303 /* PRM 10.5.8 */
	#define CLK312_EN_LBN 3

	/* PHYXS registers */
	#define PHYXS_XCONTROL_REG 49152
	#define PHYXS_RESET_LBN 15
	#define PHYXS_RESET_WIDTH 1

	#define PHYXS_TEST1 (49162)
	#define LOOPBACK_NEAR_LBN (8)
	#define LOOPBACK_NEAR_WIDTH (1)

	/* Boot status register */
	#define PCS_BOOT_STATUS_REG 53248
	#define PCS_BOOT_FATAL_ERROR_LBN 0
	#define PCS_BOOT_PROGRESS_LBN 1
	#define PCS_BOOT_PROGRESS_WIDTH 2
	#define PCS_BOOT_PROGRESS_INIT 0
	#define PCS_BOOT_PROGRESS_WAIT_MDIO 1
	#define PCS_BOOT_PROGRESS_CHECKSUM 2
	#define PCS_BOOT_PROGRESS_JUMP 3
	#define PCS_BOOT_DOWNLOAD_WAIT_LBN 3
	#define PCS_BOOT_CODE_STARTED_LBN 4

	/* 100M/1G PHY registers */
	#define GPHY_XCONTROL_REG 49152
	#define GPHY_ISOLATE_LBN 10
	#define GPHY_ISOLATE_WIDTH 1
	#define GPHY_DUPLEX_LBN 8
	#define GPHY_DUPLEX_WIDTH 1
	#define GPHY_LOOPBACK_NEAR_LBN 14
	#define GPHY_LOOPBACK_NEAR_WIDTH 1

	#define C22EXT_STATUS_REG 49153
	#define C22EXT_STATUS_LINK_LBN 2
	#define C22EXT_STATUS_LINK_WIDTH 1

	#define C22EXT_MSTSLV_CTRL 49161
	#define C22EXT_MSTSLV_CTRL_ADV_1000_HD_LBN 8
	#define C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN 9

	#define C22EXT_MSTSLV_STATUS 49162
	#define C22EXT_MSTSLV_STATUS_LP_1000_HD_LBN 10
	#define C22EXT_MSTSLV_STATUS_LP_1000_FD_LBN 11

	/* Time to wait between powering down the LNPGA and turning off the power
	* rails */
	#define LNPGA_PDOWN_WAIT (HZ / 5)

	struct tenxpress_phy_data {
	enum efx_loopback_mode loopback_mode;
	enum efx_phy_mode phy_mode;
	int bad_lp_tries;
	};

	static int tenxpress_init(struct efx_nic *efx)
	{
	/* Enable 312.5 MHz clock */
	efx_mdio_write(efx, MDIO_MMD_PCS, PCS_TEST_SELECT_REG,
	1 << CLK312_EN_LBN);

	/* Set the LEDs up as: Green = Link, Amber = Link/Act, Red = Off */
	efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, PMA_PMD_LED_CTRL_REG,
	1 << PMA_PMA_LED_ACTIVITY_LBN, true);
	efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_LED_OVERR_REG,
	SFX7101_PMA_PMD_LED_DEFAULT);

	return 0;
	}

	static int tenxpress_phy_probe(struct efx_nic *efx)
	{
	struct tenxpress_phy_data *phy_data;

	/* Allocate phy private storage */
	phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL);
	if (!phy_data)
	return -ENOMEM;
	efx->phy_data = phy_data;
	phy_data->phy_mode = efx->phy_mode;

	efx->mdio.mmds = TENXPRESS_REQUIRED_DEVS;
	efx->mdio.mode_support = MDIO_SUPPORTS_C45;

	efx->loopback_modes = SFX7101_LOOPBACKS \| FALCON_XMAC_LOOPBACKS;

	efx->link_advertising = (ADVERTISED_TP \| ADVERTISED_Autoneg \|
	ADVERTISED_10000baseT_Full);

	return 0;
	}

	static int tenxpress_phy_init(struct efx_nic *efx)
	{
	int rc;

	falcon_board(efx)->type->init_phy(efx);

	if (!(efx->phy_mode & PHY_MODE_SPECIAL)) {
	rc = efx_mdio_wait_reset_mmds(efx, TENXPRESS_REQUIRED_DEVS);
	if (rc < 0)
	return rc;

	rc = efx_mdio_check_mmds(efx, TENXPRESS_REQUIRED_DEVS);
	if (rc < 0)
	return rc;
	}

	rc = tenxpress_init(efx);
	if (rc < 0)
	return rc;

	/* Reinitialise flow control settings */
	efx_link_set_wanted_fc(efx, efx->wanted_fc);
	efx_mdio_an_reconfigure(efx);

	schedule_timeout_uninterruptible(HZ / 5); /* 200ms */

	/* Let XGXS and SerDes out of reset */
	falcon_reset_xaui(efx);

	return 0;
	}

	/* Perform a "special software reset" on the PHY. The caller is
	* responsible for saving and restoring the PHY hardware registers
	* properly, and masking/unmasking LASI */
	static int tenxpress_special_reset(struct efx_nic *efx)
	{
	int rc, reg;

	/* The XGMAC clock is driven from the SFX7101 312MHz clock, so
	* a special software reset can glitch the XGMAC sufficiently for stats
	* requests to fail. */
	falcon_stop_nic_stats(efx);

	/* Initiate reset */
	reg = efx_mdio_read(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG);
	reg \|= (1 << PMA_PMD_EXT_SSR_LBN);
	efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG, reg);

	mdelay(200);

	/* Wait for the blocks to come out of reset */
	rc = efx_mdio_wait_reset_mmds(efx, TENXPRESS_REQUIRED_DEVS);
	if (rc < 0)
	goto out;

	/* Try and reconfigure the device */
	rc = tenxpress_init(efx);
	if (rc < 0)
	goto out;

	/* Wait for the XGXS state machine to churn */
	mdelay(10);
	out:
	falcon_start_nic_stats(efx);
	return rc;
	}

	static void sfx7101_check_bad_lp(struct efx_nic *efx, bool link_ok)
	{
	struct tenxpress_phy_data *pd = efx->phy_data;
	bool bad_lp;
	int reg;

	if (link_ok) {
	bad_lp = false;
	} else {
	/* Check that AN has started but not completed. */
	reg = efx_mdio_read(efx, MDIO_MMD_AN, MDIO_STAT1);
	if (!(reg & MDIO_AN_STAT1_LPABLE))
	return; /* LP status is unknown */
	bad_lp = !(reg & MDIO_AN_STAT1_COMPLETE);
	if (bad_lp)
	pd->bad_lp_tries++;
	}

	/* Nothing to do if all is well and was previously so. */
	if (!pd->bad_lp_tries)
	return;

	/* Use the RX (red) LED as an error indicator once we've seen AN
	* failure several times in a row, and also log a message. */
	if (!bad_lp \|\| pd->bad_lp_tries == MAX_BAD_LP_TRIES) {
	reg = efx_mdio_read(efx, MDIO_MMD_PMAPMD,
	PMA_PMD_LED_OVERR_REG);
	reg &= ~(PMA_PMD_LED_MASK << PMA_PMD_LED_RX_LBN);
	if (!bad_lp) {
	reg \|= PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN;
	} else {
	reg \|= PMA_PMD_LED_FLASH << PMA_PMD_LED_RX_LBN;
	netif_err(efx, link, efx->net_dev,
	"appears to be plugged into a port"
	" that is not 10GBASE-T capable. The PHY"
	" supports 10GBASE-T ONLY, so no link can"
	" be established\n");
	}
	efx_mdio_write(efx, MDIO_MMD_PMAPMD,
	PMA_PMD_LED_OVERR_REG, reg);
	pd->bad_lp_tries = bad_lp;
	}
	}

	static bool sfx7101_link_ok(struct efx_nic *efx)
	{
	return efx_mdio_links_ok(efx,
	MDIO_DEVS_PMAPMD \|
	MDIO_DEVS_PCS \|
	MDIO_DEVS_PHYXS);
	}

	static void tenxpress_ext_loopback(struct efx_nic *efx)
	{
	efx_mdio_set_flag(efx, MDIO_MMD_PHYXS, PHYXS_TEST1,
	1 << LOOPBACK_NEAR_LBN,
	efx->loopback_mode == LOOPBACK_PHYXS);
	}

	static void tenxpress_low_power(struct efx_nic *efx)
	{
	efx_mdio_set_mmds_lpower(
	efx, !!(efx->phy_mode & PHY_MODE_LOW_POWER),
	TENXPRESS_REQUIRED_DEVS);
	}

	static int tenxpress_phy_reconfigure(struct efx_nic *efx)
	{
	struct tenxpress_phy_data *phy_data = efx->phy_data;
	bool phy_mode_change, loop_reset;

	if (efx->phy_mode & (PHY_MODE_OFF \| PHY_MODE_SPECIAL)) {
	phy_data->phy_mode = efx->phy_mode;
	return 0;
	}

	phy_mode_change = (efx->phy_mode == PHY_MODE_NORMAL &&
	phy_data->phy_mode != PHY_MODE_NORMAL);
	loop_reset = (LOOPBACK_OUT_OF(phy_data, efx, LOOPBACKS_EXTERNAL(efx)) \|\|
	LOOPBACK_CHANGED(phy_data, efx, 1 << LOOPBACK_GPHY));

	if (loop_reset \|\| phy_mode_change) {
	tenxpress_special_reset(efx);
	falcon_reset_xaui(efx);
	}

	tenxpress_low_power(efx);
	efx_mdio_transmit_disable(efx);
	efx_mdio_phy_reconfigure(efx);
	tenxpress_ext_loopback(efx);
	efx_mdio_an_reconfigure(efx);

	phy_data->loopback_mode = efx->loopback_mode;
	phy_data->phy_mode = efx->phy_mode;

	return 0;
	}

	static void
	tenxpress_get_settings(struct efx_nic efx, struct ethtool_cmd ecmd);

	/* Poll for link state changes */
	static bool tenxpress_phy_poll(struct efx_nic *efx)
	{
	struct efx_link_state old_state = efx->link_state;

	efx->link_state.up = sfx7101_link_ok(efx);
	efx->link_state.speed = 10000;
	efx->link_state.fd = true;
	efx->link_state.fc = efx_mdio_get_pause(efx);

	sfx7101_check_bad_lp(efx, efx->link_state.up);

	return !efx_link_state_equal(&efx->link_state, &old_state);
	}

	static void sfx7101_phy_fini(struct efx_nic *efx)
	{
	int reg;

	/* Power down the LNPGA */
	reg = (1 << PMA_PMD_LNPGA_POWERDOWN_LBN);
	efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG, reg);

	/* Waiting here ensures that the board fini, which can turn
	* off the power to the PHY, won't get run until the LNPGA
	* powerdown has been given long enough to complete. */
	schedule_timeout_uninterruptible(LNPGA_PDOWN_WAIT); /* 200 ms */
	}

	static void tenxpress_phy_remove(struct efx_nic *efx)
	{
	kfree(efx->phy_data);
	efx->phy_data = NULL;
	}


	/* Override the RX, TX and link LEDs */
	void tenxpress_set_id_led(struct efx_nic *efx, enum efx_led_mode mode)
	{
	int reg;

	switch (mode) {
	case EFX_LED_OFF:
	reg = (PMA_PMD_LED_OFF << PMA_PMD_LED_TX_LBN) \|
	(PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN) \|
	(PMA_PMD_LED_OFF << PMA_PMD_LED_LINK_LBN);
	break;
	case EFX_LED_ON:
	reg = (PMA_PMD_LED_ON << PMA_PMD_LED_TX_LBN) \|
	(PMA_PMD_LED_ON << PMA_PMD_LED_RX_LBN) \|
	(PMA_PMD_LED_ON << PMA_PMD_LED_LINK_LBN);
	break;
	default:
	reg = SFX7101_PMA_PMD_LED_DEFAULT;
	break;
	}

	efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_LED_OVERR_REG, reg);
	}

	static const char *const sfx7101_test_names[] = {
	"bist"
	};

	static const char sfx7101_test_name(struct efx_nic efx, unsigned int index)
	{
	if (index < ARRAY_SIZE(sfx7101_test_names))
	return sfx7101_test_names[index];
	return NULL;
	}

	static int
	sfx7101_run_tests(struct efx_nic efx, int results, unsigned flags)
	{
	int rc;

	if (!(flags & ETH_TEST_FL_OFFLINE))
	return 0;

	/* BIST is automatically run after a special software reset */
	rc = tenxpress_special_reset(efx);
	results[0] = rc ? -1 : 1;

	efx_mdio_an_reconfigure(efx);

	return rc;
	}

	static void
	tenxpress_get_settings(struct efx_nic efx, struct ethtool_cmd ecmd)
	{
	u32 adv = 0, lpa = 0;
	int reg;

	reg = efx_mdio_read(efx, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL);
	if (reg & MDIO_AN_10GBT_CTRL_ADV10G)
	adv \|= ADVERTISED_10000baseT_Full;
	reg = efx_mdio_read(efx, MDIO_MMD_AN, MDIO_AN_10GBT_STAT);
	if (reg & MDIO_AN_10GBT_STAT_LP10G)
	lpa \|= ADVERTISED_10000baseT_Full;

	mdio45_ethtool_gset_npage(&efx->mdio, ecmd, adv, lpa);

	/* In loopback, the PHY automatically brings up the correct interface,
	* but doesn't advertise the correct speed. So override it */
	if (LOOPBACK_EXTERNAL(efx))
	ethtool_cmd_speed_set(ecmd, SPEED_10000);
	}

	static int tenxpress_set_settings(struct efx_nic efx, struct ethtool_cmd ecmd)
	{
	if (!ecmd->autoneg)
	return -EINVAL;

	return efx_mdio_set_settings(efx, ecmd);
	}

	static void sfx7101_set_npage_adv(struct efx_nic *efx, u32 advertising)
	{
	efx_mdio_set_flag(efx, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
	MDIO_AN_10GBT_CTRL_ADV10G,
	advertising & ADVERTISED_10000baseT_Full);
	}

	const struct efx_phy_operations falcon_sfx7101_phy_ops = {
	.probe = tenxpress_phy_probe,
	.init = tenxpress_phy_init,
	.reconfigure = tenxpress_phy_reconfigure,
	.poll = tenxpress_phy_poll,
	.fini = sfx7101_phy_fini,
	.remove = tenxpress_phy_remove,
	.get_settings = tenxpress_get_settings,
	.set_settings = tenxpress_set_settings,
	.set_npage_adv = sfx7101_set_npage_adv,
	.test_alive = efx_mdio_test_alive,
	.test_name = sfx7101_test_name,
	.run_tests = sfx7101_run_tests,
	};