| /* |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 2004-2010 Cavium Networks |
| * Copyright (C) 2008 Wind River Systems |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/irq.h> |
| #include <linux/i2c.h> |
| #include <linux/usb.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| |
| #include <asm/octeon/octeon.h> |
| #include <asm/octeon/cvmx-rnm-defs.h> |
| |
| static struct octeon_cf_data octeon_cf_data; |
| |
| static int __init octeon_cf_device_init(void) |
| { |
| union cvmx_mio_boot_reg_cfgx mio_boot_reg_cfg; |
| unsigned long base_ptr, region_base, region_size; |
| struct platform_device *pd; |
| struct resource cf_resources[3]; |
| unsigned int num_resources; |
| int i; |
| int ret = 0; |
| |
| /* Setup octeon-cf platform device if present. */ |
| base_ptr = 0; |
| if (octeon_bootinfo->major_version == 1 |
| && octeon_bootinfo->minor_version >= 1) { |
| if (octeon_bootinfo->compact_flash_common_base_addr) |
| base_ptr = |
| octeon_bootinfo->compact_flash_common_base_addr; |
| } else { |
| base_ptr = 0x1d000800; |
| } |
| |
| if (!base_ptr) |
| return ret; |
| |
| /* Find CS0 region. */ |
| for (i = 0; i < 8; i++) { |
| mio_boot_reg_cfg.u64 = cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(i)); |
| region_base = mio_boot_reg_cfg.s.base << 16; |
| region_size = (mio_boot_reg_cfg.s.size + 1) << 16; |
| if (mio_boot_reg_cfg.s.en && base_ptr >= region_base |
| && base_ptr < region_base + region_size) |
| break; |
| } |
| if (i >= 7) { |
| /* i and i + 1 are CS0 and CS1, both must be less than 8. */ |
| goto out; |
| } |
| octeon_cf_data.base_region = i; |
| octeon_cf_data.is16bit = mio_boot_reg_cfg.s.width; |
| octeon_cf_data.base_region_bias = base_ptr - region_base; |
| memset(cf_resources, 0, sizeof(cf_resources)); |
| num_resources = 0; |
| cf_resources[num_resources].flags = IORESOURCE_MEM; |
| cf_resources[num_resources].start = region_base; |
| cf_resources[num_resources].end = region_base + region_size - 1; |
| num_resources++; |
| |
| |
| if (!(base_ptr & 0xfffful)) { |
| /* |
| * Boot loader signals availability of DMA (true_ide |
| * mode) by setting low order bits of base_ptr to |
| * zero. |
| */ |
| |
| /* Assume that CS1 immediately follows. */ |
| mio_boot_reg_cfg.u64 = |
| cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(i + 1)); |
| region_base = mio_boot_reg_cfg.s.base << 16; |
| region_size = (mio_boot_reg_cfg.s.size + 1) << 16; |
| if (!mio_boot_reg_cfg.s.en) |
| goto out; |
| |
| cf_resources[num_resources].flags = IORESOURCE_MEM; |
| cf_resources[num_resources].start = region_base; |
| cf_resources[num_resources].end = region_base + region_size - 1; |
| num_resources++; |
| |
| octeon_cf_data.dma_engine = 0; |
| cf_resources[num_resources].flags = IORESOURCE_IRQ; |
| cf_resources[num_resources].start = OCTEON_IRQ_BOOTDMA; |
| cf_resources[num_resources].end = OCTEON_IRQ_BOOTDMA; |
| num_resources++; |
| } else { |
| octeon_cf_data.dma_engine = -1; |
| } |
| |
| pd = platform_device_alloc("pata_octeon_cf", -1); |
| if (!pd) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| pd->dev.platform_data = &octeon_cf_data; |
| |
| ret = platform_device_add_resources(pd, cf_resources, num_resources); |
| if (ret) |
| goto fail; |
| |
| ret = platform_device_add(pd); |
| if (ret) |
| goto fail; |
| |
| return ret; |
| fail: |
| platform_device_put(pd); |
| out: |
| return ret; |
| } |
| device_initcall(octeon_cf_device_init); |
| |
| /* Octeon Random Number Generator. */ |
| static int __init octeon_rng_device_init(void) |
| { |
| struct platform_device *pd; |
| int ret = 0; |
| |
| struct resource rng_resources[] = { |
| { |
| .flags = IORESOURCE_MEM, |
| .start = XKPHYS_TO_PHYS(CVMX_RNM_CTL_STATUS), |
| .end = XKPHYS_TO_PHYS(CVMX_RNM_CTL_STATUS) + 0xf |
| }, { |
| .flags = IORESOURCE_MEM, |
| .start = cvmx_build_io_address(8, 0), |
| .end = cvmx_build_io_address(8, 0) + 0x7 |
| } |
| }; |
| |
| pd = platform_device_alloc("octeon_rng", -1); |
| if (!pd) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| ret = platform_device_add_resources(pd, rng_resources, |
| ARRAY_SIZE(rng_resources)); |
| if (ret) |
| goto fail; |
| |
| ret = platform_device_add(pd); |
| if (ret) |
| goto fail; |
| |
| return ret; |
| fail: |
| platform_device_put(pd); |
| |
| out: |
| return ret; |
| } |
| device_initcall(octeon_rng_device_init); |
| |
| static struct i2c_board_info __initdata octeon_i2c_devices[] = { |
| { |
| I2C_BOARD_INFO("ds1337", 0x68), |
| }, |
| }; |
| |
| static int __init octeon_i2c_devices_init(void) |
| { |
| return i2c_register_board_info(0, octeon_i2c_devices, |
| ARRAY_SIZE(octeon_i2c_devices)); |
| } |
| arch_initcall(octeon_i2c_devices_init); |
| |
| #define OCTEON_I2C_IO_BASE 0x1180000001000ull |
| #define OCTEON_I2C_IO_UNIT_OFFSET 0x200 |
| |
| static struct octeon_i2c_data octeon_i2c_data[2]; |
| |
| static int __init octeon_i2c_device_init(void) |
| { |
| struct platform_device *pd; |
| int ret = 0; |
| int port, num_ports; |
| |
| struct resource i2c_resources[] = { |
| { |
| .flags = IORESOURCE_MEM, |
| }, { |
| .flags = IORESOURCE_IRQ, |
| } |
| }; |
| |
| if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN52XX)) |
| num_ports = 2; |
| else |
| num_ports = 1; |
| |
| for (port = 0; port < num_ports; port++) { |
| octeon_i2c_data[port].sys_freq = octeon_get_io_clock_rate(); |
| /*FIXME: should be examined. At the moment is set for 100Khz */ |
| octeon_i2c_data[port].i2c_freq = 100000; |
| |
| pd = platform_device_alloc("i2c-octeon", port); |
| if (!pd) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| pd->dev.platform_data = octeon_i2c_data + port; |
| |
| i2c_resources[0].start = |
| OCTEON_I2C_IO_BASE + (port * OCTEON_I2C_IO_UNIT_OFFSET); |
| i2c_resources[0].end = i2c_resources[0].start + 0x1f; |
| switch (port) { |
| case 0: |
| i2c_resources[1].start = OCTEON_IRQ_TWSI; |
| i2c_resources[1].end = OCTEON_IRQ_TWSI; |
| break; |
| case 1: |
| i2c_resources[1].start = OCTEON_IRQ_TWSI2; |
| i2c_resources[1].end = OCTEON_IRQ_TWSI2; |
| break; |
| default: |
| BUG(); |
| } |
| |
| ret = platform_device_add_resources(pd, |
| i2c_resources, |
| ARRAY_SIZE(i2c_resources)); |
| if (ret) |
| goto fail; |
| |
| ret = platform_device_add(pd); |
| if (ret) |
| goto fail; |
| } |
| return ret; |
| fail: |
| platform_device_put(pd); |
| out: |
| return ret; |
| } |
| device_initcall(octeon_i2c_device_init); |
| |
| /* Octeon SMI/MDIO interface. */ |
| static int __init octeon_mdiobus_device_init(void) |
| { |
| struct platform_device *pd; |
| int ret = 0; |
| |
| if (octeon_is_simulation()) |
| return 0; /* No mdio in the simulator. */ |
| |
| /* The bus number is the platform_device id. */ |
| pd = platform_device_alloc("mdio-octeon", 0); |
| if (!pd) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| ret = platform_device_add(pd); |
| if (ret) |
| goto fail; |
| |
| return ret; |
| fail: |
| platform_device_put(pd); |
| |
| out: |
| return ret; |
| |
| } |
| device_initcall(octeon_mdiobus_device_init); |
| |
| /* Octeon mgmt port Ethernet interface. */ |
| static int __init octeon_mgmt_device_init(void) |
| { |
| struct platform_device *pd; |
| int ret = 0; |
| int port, num_ports; |
| |
| struct resource mgmt_port_resource = { |
| .flags = IORESOURCE_IRQ, |
| .start = -1, |
| .end = -1 |
| }; |
| |
| if (!OCTEON_IS_MODEL(OCTEON_CN56XX) && !OCTEON_IS_MODEL(OCTEON_CN52XX)) |
| return 0; |
| |
| if (OCTEON_IS_MODEL(OCTEON_CN56XX)) |
| num_ports = 1; |
| else |
| num_ports = 2; |
| |
| for (port = 0; port < num_ports; port++) { |
| pd = platform_device_alloc("octeon_mgmt", port); |
| if (!pd) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| /* No DMA restrictions */ |
| pd->dev.coherent_dma_mask = DMA_BIT_MASK(64); |
| pd->dev.dma_mask = &pd->dev.coherent_dma_mask; |
| |
| switch (port) { |
| case 0: |
| mgmt_port_resource.start = OCTEON_IRQ_MII0; |
| break; |
| case 1: |
| mgmt_port_resource.start = OCTEON_IRQ_MII1; |
| break; |
| default: |
| BUG(); |
| } |
| mgmt_port_resource.end = mgmt_port_resource.start; |
| |
| ret = platform_device_add_resources(pd, &mgmt_port_resource, 1); |
| |
| if (ret) |
| goto fail; |
| |
| ret = platform_device_add(pd); |
| if (ret) |
| goto fail; |
| } |
| return ret; |
| fail: |
| platform_device_put(pd); |
| |
| out: |
| return ret; |
| |
| } |
| device_initcall(octeon_mgmt_device_init); |
| |
| #ifdef CONFIG_USB |
| |
| static int __init octeon_ehci_device_init(void) |
| { |
| struct platform_device *pd; |
| int ret = 0; |
| |
| struct resource usb_resources[] = { |
| { |
| .flags = IORESOURCE_MEM, |
| }, { |
| .flags = IORESOURCE_IRQ, |
| } |
| }; |
| |
| /* Only Octeon2 has ehci/ohci */ |
| if (!OCTEON_IS_MODEL(OCTEON_CN63XX)) |
| return 0; |
| |
| if (octeon_is_simulation() || usb_disabled()) |
| return 0; /* No USB in the simulator. */ |
| |
| pd = platform_device_alloc("octeon-ehci", 0); |
| if (!pd) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| usb_resources[0].start = 0x00016F0000000000ULL; |
| usb_resources[0].end = usb_resources[0].start + 0x100; |
| |
| usb_resources[1].start = OCTEON_IRQ_USB0; |
| usb_resources[1].end = OCTEON_IRQ_USB0; |
| |
| ret = platform_device_add_resources(pd, usb_resources, |
| ARRAY_SIZE(usb_resources)); |
| if (ret) |
| goto fail; |
| |
| ret = platform_device_add(pd); |
| if (ret) |
| goto fail; |
| |
| return ret; |
| fail: |
| platform_device_put(pd); |
| out: |
| return ret; |
| } |
| device_initcall(octeon_ehci_device_init); |
| |
| static int __init octeon_ohci_device_init(void) |
| { |
| struct platform_device *pd; |
| int ret = 0; |
| |
| struct resource usb_resources[] = { |
| { |
| .flags = IORESOURCE_MEM, |
| }, { |
| .flags = IORESOURCE_IRQ, |
| } |
| }; |
| |
| /* Only Octeon2 has ehci/ohci */ |
| if (!OCTEON_IS_MODEL(OCTEON_CN63XX)) |
| return 0; |
| |
| if (octeon_is_simulation() || usb_disabled()) |
| return 0; /* No USB in the simulator. */ |
| |
| pd = platform_device_alloc("octeon-ohci", 0); |
| if (!pd) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| usb_resources[0].start = 0x00016F0000000400ULL; |
| usb_resources[0].end = usb_resources[0].start + 0x100; |
| |
| usb_resources[1].start = OCTEON_IRQ_USB0; |
| usb_resources[1].end = OCTEON_IRQ_USB0; |
| |
| ret = platform_device_add_resources(pd, usb_resources, |
| ARRAY_SIZE(usb_resources)); |
| if (ret) |
| goto fail; |
| |
| ret = platform_device_add(pd); |
| if (ret) |
| goto fail; |
| |
| return ret; |
| fail: |
| platform_device_put(pd); |
| out: |
| return ret; |
| } |
| device_initcall(octeon_ohci_device_init); |
| |
| #endif /* CONFIG_USB */ |
| |
| MODULE_AUTHOR("David Daney <ddaney@caviumnetworks.com>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("Platform driver for Octeon SOC"); |