| /* |
| * PS3 interrupt routines. |
| * |
| * Copyright (C) 2006 Sony Computer Entertainment Inc. |
| * Copyright 2006 Sony Corp. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/export.h> |
| #include <linux/irq.h> |
| |
| #include <asm/machdep.h> |
| #include <asm/udbg.h> |
| #include <asm/lv1call.h> |
| #include <asm/smp.h> |
| |
| #include "platform.h" |
| |
| #if defined(DEBUG) |
| #define DBG udbg_printf |
| #define FAIL udbg_printf |
| #else |
| #define DBG pr_devel |
| #define FAIL pr_debug |
| #endif |
| |
| /** |
| * struct ps3_bmp - a per cpu irq status and mask bitmap structure |
| * @status: 256 bit status bitmap indexed by plug |
| * @unused_1: Alignment |
| * @mask: 256 bit mask bitmap indexed by plug |
| * @unused_2: Alignment |
| * |
| * The HV maintains per SMT thread mappings of HV outlet to HV plug on |
| * behalf of the guest. These mappings are implemented as 256 bit guest |
| * supplied bitmaps indexed by plug number. The addresses of the bitmaps |
| * are registered with the HV through lv1_configure_irq_state_bitmap(). |
| * The HV requires that the 512 bits of status + mask not cross a page |
| * boundary. PS3_BMP_MINALIGN is used to define this minimal 64 byte |
| * alignment. |
| * |
| * The HV supports 256 plugs per thread, assigned as {0..255}, for a total |
| * of 512 plugs supported on a processor. To simplify the logic this |
| * implementation equates HV plug value to Linux virq value, constrains each |
| * interrupt to have a system wide unique plug number, and limits the range |
| * of the plug values to map into the first dword of the bitmaps. This |
| * gives a usable range of plug values of {NUM_ISA_INTERRUPTS..63}. Note |
| * that there is no constraint on how many in this set an individual thread |
| * can acquire. |
| * |
| * The mask is declared as unsigned long so we can use set/clear_bit on it. |
| */ |
| |
| #define PS3_BMP_MINALIGN 64 |
| |
| struct ps3_bmp { |
| struct { |
| u64 status; |
| u64 unused_1[3]; |
| unsigned long mask; |
| u64 unused_2[3]; |
| }; |
| }; |
| |
| /** |
| * struct ps3_private - a per cpu data structure |
| * @bmp: ps3_bmp structure |
| * @bmp_lock: Syncronize access to bmp. |
| * @ipi_debug_brk_mask: Mask for debug break IPIs |
| * @ppe_id: HV logical_ppe_id |
| * @thread_id: HV thread_id |
| * @ipi_mask: Mask of IPI virqs |
| */ |
| |
| struct ps3_private { |
| struct ps3_bmp bmp __attribute__ ((aligned (PS3_BMP_MINALIGN))); |
| spinlock_t bmp_lock; |
| u64 ppe_id; |
| u64 thread_id; |
| unsigned long ipi_debug_brk_mask; |
| unsigned long ipi_mask; |
| }; |
| |
| static DEFINE_PER_CPU(struct ps3_private, ps3_private); |
| |
| /** |
| * ps3_chip_mask - Set an interrupt mask bit in ps3_bmp. |
| * @virq: The assigned Linux virq. |
| * |
| * Sets ps3_bmp.mask and calls lv1_did_update_interrupt_mask(). |
| */ |
| |
| static void ps3_chip_mask(struct irq_data *d) |
| { |
| struct ps3_private *pd = irq_data_get_irq_chip_data(d); |
| unsigned long flags; |
| |
| DBG("%s:%d: thread_id %llu, virq %d\n", __func__, __LINE__, |
| pd->thread_id, d->irq); |
| |
| local_irq_save(flags); |
| clear_bit(63 - d->irq, &pd->bmp.mask); |
| lv1_did_update_interrupt_mask(pd->ppe_id, pd->thread_id); |
| local_irq_restore(flags); |
| } |
| |
| /** |
| * ps3_chip_unmask - Clear an interrupt mask bit in ps3_bmp. |
| * @virq: The assigned Linux virq. |
| * |
| * Clears ps3_bmp.mask and calls lv1_did_update_interrupt_mask(). |
| */ |
| |
| static void ps3_chip_unmask(struct irq_data *d) |
| { |
| struct ps3_private *pd = irq_data_get_irq_chip_data(d); |
| unsigned long flags; |
| |
| DBG("%s:%d: thread_id %llu, virq %d\n", __func__, __LINE__, |
| pd->thread_id, d->irq); |
| |
| local_irq_save(flags); |
| set_bit(63 - d->irq, &pd->bmp.mask); |
| lv1_did_update_interrupt_mask(pd->ppe_id, pd->thread_id); |
| local_irq_restore(flags); |
| } |
| |
| /** |
| * ps3_chip_eoi - HV end-of-interrupt. |
| * @virq: The assigned Linux virq. |
| * |
| * Calls lv1_end_of_interrupt_ext(). |
| */ |
| |
| static void ps3_chip_eoi(struct irq_data *d) |
| { |
| const struct ps3_private *pd = irq_data_get_irq_chip_data(d); |
| |
| /* non-IPIs are EOIed here. */ |
| |
| if (!test_bit(63 - d->irq, &pd->ipi_mask)) |
| lv1_end_of_interrupt_ext(pd->ppe_id, pd->thread_id, d->irq); |
| } |
| |
| /** |
| * ps3_irq_chip - Represents the ps3_bmp as a Linux struct irq_chip. |
| */ |
| |
| static struct irq_chip ps3_irq_chip = { |
| .name = "ps3", |
| .irq_mask = ps3_chip_mask, |
| .irq_unmask = ps3_chip_unmask, |
| .irq_eoi = ps3_chip_eoi, |
| }; |
| |
| /** |
| * ps3_virq_setup - virq related setup. |
| * @cpu: enum ps3_cpu_binding indicating the cpu the interrupt should be |
| * serviced on. |
| * @outlet: The HV outlet from the various create outlet routines. |
| * @virq: The assigned Linux virq. |
| * |
| * Calls irq_create_mapping() to get a virq and sets the chip data to |
| * ps3_private data. |
| */ |
| |
| static int ps3_virq_setup(enum ps3_cpu_binding cpu, unsigned long outlet, |
| unsigned int *virq) |
| { |
| int result; |
| struct ps3_private *pd; |
| |
| /* This defines the default interrupt distribution policy. */ |
| |
| if (cpu == PS3_BINDING_CPU_ANY) |
| cpu = 0; |
| |
| pd = &per_cpu(ps3_private, cpu); |
| |
| *virq = irq_create_mapping(NULL, outlet); |
| |
| if (*virq == NO_IRQ) { |
| FAIL("%s:%d: irq_create_mapping failed: outlet %lu\n", |
| __func__, __LINE__, outlet); |
| result = -ENOMEM; |
| goto fail_create; |
| } |
| |
| DBG("%s:%d: outlet %lu => cpu %u, virq %u\n", __func__, __LINE__, |
| outlet, cpu, *virq); |
| |
| result = irq_set_chip_data(*virq, pd); |
| |
| if (result) { |
| FAIL("%s:%d: irq_set_chip_data failed\n", |
| __func__, __LINE__); |
| goto fail_set; |
| } |
| |
| ps3_chip_mask(irq_get_irq_data(*virq)); |
| |
| return result; |
| |
| fail_set: |
| irq_dispose_mapping(*virq); |
| fail_create: |
| return result; |
| } |
| |
| /** |
| * ps3_virq_destroy - virq related teardown. |
| * @virq: The assigned Linux virq. |
| * |
| * Clears chip data and calls irq_dispose_mapping() for the virq. |
| */ |
| |
| static int ps3_virq_destroy(unsigned int virq) |
| { |
| const struct ps3_private *pd = irq_get_chip_data(virq); |
| |
| DBG("%s:%d: ppe_id %llu, thread_id %llu, virq %u\n", __func__, |
| __LINE__, pd->ppe_id, pd->thread_id, virq); |
| |
| irq_set_chip_data(virq, NULL); |
| irq_dispose_mapping(virq); |
| |
| DBG("%s:%d <-\n", __func__, __LINE__); |
| return 0; |
| } |
| |
| /** |
| * ps3_irq_plug_setup - Generic outlet and virq related setup. |
| * @cpu: enum ps3_cpu_binding indicating the cpu the interrupt should be |
| * serviced on. |
| * @outlet: The HV outlet from the various create outlet routines. |
| * @virq: The assigned Linux virq. |
| * |
| * Sets up virq and connects the irq plug. |
| */ |
| |
| int ps3_irq_plug_setup(enum ps3_cpu_binding cpu, unsigned long outlet, |
| unsigned int *virq) |
| { |
| int result; |
| struct ps3_private *pd; |
| |
| result = ps3_virq_setup(cpu, outlet, virq); |
| |
| if (result) { |
| FAIL("%s:%d: ps3_virq_setup failed\n", __func__, __LINE__); |
| goto fail_setup; |
| } |
| |
| pd = irq_get_chip_data(*virq); |
| |
| /* Binds outlet to cpu + virq. */ |
| |
| result = lv1_connect_irq_plug_ext(pd->ppe_id, pd->thread_id, *virq, |
| outlet, 0); |
| |
| if (result) { |
| FAIL("%s:%d: lv1_connect_irq_plug_ext failed: %s\n", |
| __func__, __LINE__, ps3_result(result)); |
| result = -EPERM; |
| goto fail_connect; |
| } |
| |
| return result; |
| |
| fail_connect: |
| ps3_virq_destroy(*virq); |
| fail_setup: |
| return result; |
| } |
| EXPORT_SYMBOL_GPL(ps3_irq_plug_setup); |
| |
| /** |
| * ps3_irq_plug_destroy - Generic outlet and virq related teardown. |
| * @virq: The assigned Linux virq. |
| * |
| * Disconnects the irq plug and tears down virq. |
| * Do not call for system bus event interrupts setup with |
| * ps3_sb_event_receive_port_setup(). |
| */ |
| |
| int ps3_irq_plug_destroy(unsigned int virq) |
| { |
| int result; |
| const struct ps3_private *pd = irq_get_chip_data(virq); |
| |
| DBG("%s:%d: ppe_id %llu, thread_id %llu, virq %u\n", __func__, |
| __LINE__, pd->ppe_id, pd->thread_id, virq); |
| |
| ps3_chip_mask(irq_get_irq_data(virq)); |
| |
| result = lv1_disconnect_irq_plug_ext(pd->ppe_id, pd->thread_id, virq); |
| |
| if (result) |
| FAIL("%s:%d: lv1_disconnect_irq_plug_ext failed: %s\n", |
| __func__, __LINE__, ps3_result(result)); |
| |
| ps3_virq_destroy(virq); |
| |
| return result; |
| } |
| EXPORT_SYMBOL_GPL(ps3_irq_plug_destroy); |
| |
| /** |
| * ps3_event_receive_port_setup - Setup an event receive port. |
| * @cpu: enum ps3_cpu_binding indicating the cpu the interrupt should be |
| * serviced on. |
| * @virq: The assigned Linux virq. |
| * |
| * The virq can be used with lv1_connect_interrupt_event_receive_port() to |
| * arrange to receive interrupts from system-bus devices, or with |
| * ps3_send_event_locally() to signal events. |
| */ |
| |
| int ps3_event_receive_port_setup(enum ps3_cpu_binding cpu, unsigned int *virq) |
| { |
| int result; |
| u64 outlet; |
| |
| result = lv1_construct_event_receive_port(&outlet); |
| |
| if (result) { |
| FAIL("%s:%d: lv1_construct_event_receive_port failed: %s\n", |
| __func__, __LINE__, ps3_result(result)); |
| *virq = NO_IRQ; |
| return result; |
| } |
| |
| result = ps3_irq_plug_setup(cpu, outlet, virq); |
| BUG_ON(result); |
| |
| return result; |
| } |
| EXPORT_SYMBOL_GPL(ps3_event_receive_port_setup); |
| |
| /** |
| * ps3_event_receive_port_destroy - Destroy an event receive port. |
| * @virq: The assigned Linux virq. |
| * |
| * Since ps3_event_receive_port_destroy destroys the receive port outlet, |
| * SB devices need to call disconnect_interrupt_event_receive_port() before |
| * this. |
| */ |
| |
| int ps3_event_receive_port_destroy(unsigned int virq) |
| { |
| int result; |
| |
| DBG(" -> %s:%d virq %u\n", __func__, __LINE__, virq); |
| |
| ps3_chip_mask(irq_get_irq_data(virq)); |
| |
| result = lv1_destruct_event_receive_port(virq_to_hw(virq)); |
| |
| if (result) |
| FAIL("%s:%d: lv1_destruct_event_receive_port failed: %s\n", |
| __func__, __LINE__, ps3_result(result)); |
| |
| /* |
| * Don't call ps3_virq_destroy() here since ps3_smp_cleanup_cpu() |
| * calls from interrupt context (smp_call_function) when kexecing. |
| */ |
| |
| DBG(" <- %s:%d\n", __func__, __LINE__); |
| return result; |
| } |
| |
| int ps3_send_event_locally(unsigned int virq) |
| { |
| return lv1_send_event_locally(virq_to_hw(virq)); |
| } |
| |
| /** |
| * ps3_sb_event_receive_port_setup - Setup a system bus event receive port. |
| * @cpu: enum ps3_cpu_binding indicating the cpu the interrupt should be |
| * serviced on. |
| * @dev: The system bus device instance. |
| * @virq: The assigned Linux virq. |
| * |
| * An event irq represents a virtual device interrupt. The interrupt_id |
| * coresponds to the software interrupt number. |
| */ |
| |
| int ps3_sb_event_receive_port_setup(struct ps3_system_bus_device *dev, |
| enum ps3_cpu_binding cpu, unsigned int *virq) |
| { |
| /* this should go in system-bus.c */ |
| |
| int result; |
| |
| result = ps3_event_receive_port_setup(cpu, virq); |
| |
| if (result) |
| return result; |
| |
| result = lv1_connect_interrupt_event_receive_port(dev->bus_id, |
| dev->dev_id, virq_to_hw(*virq), dev->interrupt_id); |
| |
| if (result) { |
| FAIL("%s:%d: lv1_connect_interrupt_event_receive_port" |
| " failed: %s\n", __func__, __LINE__, |
| ps3_result(result)); |
| ps3_event_receive_port_destroy(*virq); |
| *virq = NO_IRQ; |
| return result; |
| } |
| |
| DBG("%s:%d: interrupt_id %u, virq %u\n", __func__, __LINE__, |
| dev->interrupt_id, *virq); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(ps3_sb_event_receive_port_setup); |
| |
| int ps3_sb_event_receive_port_destroy(struct ps3_system_bus_device *dev, |
| unsigned int virq) |
| { |
| /* this should go in system-bus.c */ |
| |
| int result; |
| |
| DBG(" -> %s:%d: interrupt_id %u, virq %u\n", __func__, __LINE__, |
| dev->interrupt_id, virq); |
| |
| result = lv1_disconnect_interrupt_event_receive_port(dev->bus_id, |
| dev->dev_id, virq_to_hw(virq), dev->interrupt_id); |
| |
| if (result) |
| FAIL("%s:%d: lv1_disconnect_interrupt_event_receive_port" |
| " failed: %s\n", __func__, __LINE__, |
| ps3_result(result)); |
| |
| result = ps3_event_receive_port_destroy(virq); |
| BUG_ON(result); |
| |
| /* |
| * ps3_event_receive_port_destroy() destroys the IRQ plug, |
| * so don't call ps3_irq_plug_destroy() here. |
| */ |
| |
| result = ps3_virq_destroy(virq); |
| BUG_ON(result); |
| |
| DBG(" <- %s:%d\n", __func__, __LINE__); |
| return result; |
| } |
| EXPORT_SYMBOL(ps3_sb_event_receive_port_destroy); |
| |
| /** |
| * ps3_io_irq_setup - Setup a system bus io irq. |
| * @cpu: enum ps3_cpu_binding indicating the cpu the interrupt should be |
| * serviced on. |
| * @interrupt_id: The device interrupt id read from the system repository. |
| * @virq: The assigned Linux virq. |
| * |
| * An io irq represents a non-virtualized device interrupt. interrupt_id |
| * coresponds to the interrupt number of the interrupt controller. |
| */ |
| |
| int ps3_io_irq_setup(enum ps3_cpu_binding cpu, unsigned int interrupt_id, |
| unsigned int *virq) |
| { |
| int result; |
| u64 outlet; |
| |
| result = lv1_construct_io_irq_outlet(interrupt_id, &outlet); |
| |
| if (result) { |
| FAIL("%s:%d: lv1_construct_io_irq_outlet failed: %s\n", |
| __func__, __LINE__, ps3_result(result)); |
| return result; |
| } |
| |
| result = ps3_irq_plug_setup(cpu, outlet, virq); |
| BUG_ON(result); |
| |
| return result; |
| } |
| EXPORT_SYMBOL_GPL(ps3_io_irq_setup); |
| |
| int ps3_io_irq_destroy(unsigned int virq) |
| { |
| int result; |
| unsigned long outlet = virq_to_hw(virq); |
| |
| ps3_chip_mask(irq_get_irq_data(virq)); |
| |
| /* |
| * lv1_destruct_io_irq_outlet() will destroy the IRQ plug, |
| * so call ps3_irq_plug_destroy() first. |
| */ |
| |
| result = ps3_irq_plug_destroy(virq); |
| BUG_ON(result); |
| |
| result = lv1_destruct_io_irq_outlet(outlet); |
| |
| if (result) |
| FAIL("%s:%d: lv1_destruct_io_irq_outlet failed: %s\n", |
| __func__, __LINE__, ps3_result(result)); |
| |
| return result; |
| } |
| EXPORT_SYMBOL_GPL(ps3_io_irq_destroy); |
| |
| /** |
| * ps3_vuart_irq_setup - Setup the system virtual uart virq. |
| * @cpu: enum ps3_cpu_binding indicating the cpu the interrupt should be |
| * serviced on. |
| * @virt_addr_bmp: The caller supplied virtual uart interrupt bitmap. |
| * @virq: The assigned Linux virq. |
| * |
| * The system supports only a single virtual uart, so multiple calls without |
| * freeing the interrupt will return a wrong state error. |
| */ |
| |
| int ps3_vuart_irq_setup(enum ps3_cpu_binding cpu, void* virt_addr_bmp, |
| unsigned int *virq) |
| { |
| int result; |
| u64 outlet; |
| u64 lpar_addr; |
| |
| BUG_ON(!is_kernel_addr((u64)virt_addr_bmp)); |
| |
| lpar_addr = ps3_mm_phys_to_lpar(__pa(virt_addr_bmp)); |
| |
| result = lv1_configure_virtual_uart_irq(lpar_addr, &outlet); |
| |
| if (result) { |
| FAIL("%s:%d: lv1_configure_virtual_uart_irq failed: %s\n", |
| __func__, __LINE__, ps3_result(result)); |
| return result; |
| } |
| |
| result = ps3_irq_plug_setup(cpu, outlet, virq); |
| BUG_ON(result); |
| |
| return result; |
| } |
| EXPORT_SYMBOL_GPL(ps3_vuart_irq_setup); |
| |
| int ps3_vuart_irq_destroy(unsigned int virq) |
| { |
| int result; |
| |
| ps3_chip_mask(irq_get_irq_data(virq)); |
| result = lv1_deconfigure_virtual_uart_irq(); |
| |
| if (result) { |
| FAIL("%s:%d: lv1_configure_virtual_uart_irq failed: %s\n", |
| __func__, __LINE__, ps3_result(result)); |
| return result; |
| } |
| |
| result = ps3_irq_plug_destroy(virq); |
| BUG_ON(result); |
| |
| return result; |
| } |
| EXPORT_SYMBOL_GPL(ps3_vuart_irq_destroy); |
| |
| /** |
| * ps3_spe_irq_setup - Setup an spe virq. |
| * @cpu: enum ps3_cpu_binding indicating the cpu the interrupt should be |
| * serviced on. |
| * @spe_id: The spe_id returned from lv1_construct_logical_spe(). |
| * @class: The spe interrupt class {0,1,2}. |
| * @virq: The assigned Linux virq. |
| * |
| */ |
| |
| int ps3_spe_irq_setup(enum ps3_cpu_binding cpu, unsigned long spe_id, |
| unsigned int class, unsigned int *virq) |
| { |
| int result; |
| u64 outlet; |
| |
| BUG_ON(class > 2); |
| |
| result = lv1_get_spe_irq_outlet(spe_id, class, &outlet); |
| |
| if (result) { |
| FAIL("%s:%d: lv1_get_spe_irq_outlet failed: %s\n", |
| __func__, __LINE__, ps3_result(result)); |
| return result; |
| } |
| |
| result = ps3_irq_plug_setup(cpu, outlet, virq); |
| BUG_ON(result); |
| |
| return result; |
| } |
| |
| int ps3_spe_irq_destroy(unsigned int virq) |
| { |
| int result; |
| |
| ps3_chip_mask(irq_get_irq_data(virq)); |
| |
| result = ps3_irq_plug_destroy(virq); |
| BUG_ON(result); |
| |
| return result; |
| } |
| |
| |
| #define PS3_INVALID_OUTLET ((irq_hw_number_t)-1) |
| #define PS3_PLUG_MAX 63 |
| |
| #if defined(DEBUG) |
| static void _dump_64_bmp(const char *header, const u64 *p, unsigned cpu, |
| const char* func, int line) |
| { |
| pr_debug("%s:%d: %s %u {%04llx_%04llx_%04llx_%04llx}\n", |
| func, line, header, cpu, |
| *p >> 48, (*p >> 32) & 0xffff, (*p >> 16) & 0xffff, |
| *p & 0xffff); |
| } |
| |
| static void __maybe_unused _dump_256_bmp(const char *header, |
| const u64 *p, unsigned cpu, const char* func, int line) |
| { |
| pr_debug("%s:%d: %s %u {%016llx:%016llx:%016llx:%016llx}\n", |
| func, line, header, cpu, p[0], p[1], p[2], p[3]); |
| } |
| |
| #define dump_bmp(_x) _dump_bmp(_x, __func__, __LINE__) |
| static void _dump_bmp(struct ps3_private* pd, const char* func, int line) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&pd->bmp_lock, flags); |
| _dump_64_bmp("stat", &pd->bmp.status, pd->thread_id, func, line); |
| _dump_64_bmp("mask", (u64*)&pd->bmp.mask, pd->thread_id, func, line); |
| spin_unlock_irqrestore(&pd->bmp_lock, flags); |
| } |
| |
| #define dump_mask(_x) _dump_mask(_x, __func__, __LINE__) |
| static void __maybe_unused _dump_mask(struct ps3_private *pd, |
| const char* func, int line) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&pd->bmp_lock, flags); |
| _dump_64_bmp("mask", (u64*)&pd->bmp.mask, pd->thread_id, func, line); |
| spin_unlock_irqrestore(&pd->bmp_lock, flags); |
| } |
| #else |
| static void dump_bmp(struct ps3_private* pd) {}; |
| #endif /* defined(DEBUG) */ |
| |
| static int ps3_host_map(struct irq_domain *h, unsigned int virq, |
| irq_hw_number_t hwirq) |
| { |
| DBG("%s:%d: hwirq %lu, virq %u\n", __func__, __LINE__, hwirq, |
| virq); |
| |
| irq_set_chip_and_handler(virq, &ps3_irq_chip, handle_fasteoi_irq); |
| |
| return 0; |
| } |
| |
| static int ps3_host_match(struct irq_domain *h, struct device_node *np) |
| { |
| /* Match all */ |
| return 1; |
| } |
| |
| static const struct irq_domain_ops ps3_host_ops = { |
| .map = ps3_host_map, |
| .match = ps3_host_match, |
| }; |
| |
| void __init ps3_register_ipi_debug_brk(unsigned int cpu, unsigned int virq) |
| { |
| struct ps3_private *pd = &per_cpu(ps3_private, cpu); |
| |
| set_bit(63 - virq, &pd->ipi_debug_brk_mask); |
| |
| DBG("%s:%d: cpu %u, virq %u, mask %lxh\n", __func__, __LINE__, |
| cpu, virq, pd->ipi_debug_brk_mask); |
| } |
| |
| void __init ps3_register_ipi_irq(unsigned int cpu, unsigned int virq) |
| { |
| struct ps3_private *pd = &per_cpu(ps3_private, cpu); |
| |
| set_bit(63 - virq, &pd->ipi_mask); |
| |
| DBG("%s:%d: cpu %u, virq %u, ipi_mask %lxh\n", __func__, __LINE__, |
| cpu, virq, pd->ipi_mask); |
| } |
| |
| static unsigned int ps3_get_irq(void) |
| { |
| struct ps3_private *pd = this_cpu_ptr(&ps3_private); |
| u64 x = (pd->bmp.status & pd->bmp.mask); |
| unsigned int plug; |
| |
| /* check for ipi break first to stop this cpu ASAP */ |
| |
| if (x & pd->ipi_debug_brk_mask) |
| x &= pd->ipi_debug_brk_mask; |
| |
| asm volatile("cntlzd %0,%1" : "=r" (plug) : "r" (x)); |
| plug &= 0x3f; |
| |
| if (unlikely(plug == NO_IRQ)) { |
| DBG("%s:%d: no plug found: thread_id %llu\n", __func__, |
| __LINE__, pd->thread_id); |
| dump_bmp(&per_cpu(ps3_private, 0)); |
| dump_bmp(&per_cpu(ps3_private, 1)); |
| return NO_IRQ; |
| } |
| |
| #if defined(DEBUG) |
| if (unlikely(plug < NUM_ISA_INTERRUPTS || plug > PS3_PLUG_MAX)) { |
| dump_bmp(&per_cpu(ps3_private, 0)); |
| dump_bmp(&per_cpu(ps3_private, 1)); |
| BUG(); |
| } |
| #endif |
| |
| /* IPIs are EOIed here. */ |
| |
| if (test_bit(63 - plug, &pd->ipi_mask)) |
| lv1_end_of_interrupt_ext(pd->ppe_id, pd->thread_id, plug); |
| |
| return plug; |
| } |
| |
| void __init ps3_init_IRQ(void) |
| { |
| int result; |
| unsigned cpu; |
| struct irq_domain *host; |
| |
| host = irq_domain_add_nomap(NULL, PS3_PLUG_MAX + 1, &ps3_host_ops, NULL); |
| irq_set_default_host(host); |
| |
| for_each_possible_cpu(cpu) { |
| struct ps3_private *pd = &per_cpu(ps3_private, cpu); |
| |
| lv1_get_logical_ppe_id(&pd->ppe_id); |
| pd->thread_id = get_hard_smp_processor_id(cpu); |
| spin_lock_init(&pd->bmp_lock); |
| |
| DBG("%s:%d: ppe_id %llu, thread_id %llu, bmp %lxh\n", |
| __func__, __LINE__, pd->ppe_id, pd->thread_id, |
| ps3_mm_phys_to_lpar(__pa(&pd->bmp))); |
| |
| result = lv1_configure_irq_state_bitmap(pd->ppe_id, |
| pd->thread_id, ps3_mm_phys_to_lpar(__pa(&pd->bmp))); |
| |
| if (result) |
| FAIL("%s:%d: lv1_configure_irq_state_bitmap failed:" |
| " %s\n", __func__, __LINE__, |
| ps3_result(result)); |
| } |
| |
| ppc_md.get_irq = ps3_get_irq; |
| } |
| |
| void ps3_shutdown_IRQ(int cpu) |
| { |
| int result; |
| u64 ppe_id; |
| u64 thread_id = get_hard_smp_processor_id(cpu); |
| |
| lv1_get_logical_ppe_id(&ppe_id); |
| result = lv1_configure_irq_state_bitmap(ppe_id, thread_id, 0); |
| |
| DBG("%s:%d: lv1_configure_irq_state_bitmap (%llu:%llu/%d) %s\n", __func__, |
| __LINE__, ppe_id, thread_id, cpu, ps3_result(result)); |
| } |