| /* |
| * Copyright (c) 2008, 2009, 2010 QLogic Corporation. All rights reserved. |
| * |
| * This software is available to you under a choice of one of two |
| * licenses. You may choose to be licensed under the terms of the GNU |
| * General Public License (GPL) Version 2, available from the file |
| * COPYING in the main directory of this source tree, or the |
| * OpenIB.org BSD license below: |
| * |
| * Redistribution and use in source and binary forms, with or |
| * without modification, are permitted provided that the following |
| * conditions are met: |
| * |
| * - Redistributions of source code must retain the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer. |
| * |
| * - Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials |
| * provided with the distribution. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS |
| * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN |
| * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN |
| * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE |
| * SOFTWARE. |
| */ |
| |
| /* |
| * This file contains all of the code that is specific to the |
| * InfiniPath 7322 chip |
| */ |
| |
| #include <linux/interrupt.h> |
| #include <linux/pci.h> |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| #include <linux/jiffies.h> |
| #include <linux/module.h> |
| #include <rdma/ib_verbs.h> |
| #include <rdma/ib_smi.h> |
| |
| #include "qib.h" |
| #include "qib_7322_regs.h" |
| #include "qib_qsfp.h" |
| |
| #include "qib_mad.h" |
| |
| static void qib_setup_7322_setextled(struct qib_pportdata *, u32); |
| static void qib_7322_handle_hwerrors(struct qib_devdata *, char *, size_t); |
| static void sendctrl_7322_mod(struct qib_pportdata *ppd, u32 op); |
| static irqreturn_t qib_7322intr(int irq, void *data); |
| static irqreturn_t qib_7322bufavail(int irq, void *data); |
| static irqreturn_t sdma_intr(int irq, void *data); |
| static irqreturn_t sdma_idle_intr(int irq, void *data); |
| static irqreturn_t sdma_progress_intr(int irq, void *data); |
| static irqreturn_t sdma_cleanup_intr(int irq, void *data); |
| static void qib_7322_txchk_change(struct qib_devdata *, u32, u32, u32, |
| struct qib_ctxtdata *rcd); |
| static u8 qib_7322_phys_portstate(u64); |
| static u32 qib_7322_iblink_state(u64); |
| static void qib_set_ib_7322_lstate(struct qib_pportdata *ppd, u16 linkcmd, |
| u16 linitcmd); |
| static void force_h1(struct qib_pportdata *); |
| static void adj_tx_serdes(struct qib_pportdata *); |
| static u32 qib_7322_setpbc_control(struct qib_pportdata *, u32, u8, u8); |
| static void qib_7322_mini_pcs_reset(struct qib_pportdata *); |
| |
| static u32 ahb_mod(struct qib_devdata *, int, int, int, u32, u32); |
| static void ibsd_wr_allchans(struct qib_pportdata *, int, unsigned, unsigned); |
| static void serdes_7322_los_enable(struct qib_pportdata *, int); |
| static int serdes_7322_init_old(struct qib_pportdata *); |
| static int serdes_7322_init_new(struct qib_pportdata *); |
| |
| #define BMASK(msb, lsb) (((1 << ((msb) + 1 - (lsb))) - 1) << (lsb)) |
| |
| /* LE2 serdes values for different cases */ |
| #define LE2_DEFAULT 5 |
| #define LE2_5m 4 |
| #define LE2_QME 0 |
| |
| /* Below is special-purpose, so only really works for the IB SerDes blocks. */ |
| #define IBSD(hw_pidx) (hw_pidx + 2) |
| |
| /* these are variables for documentation and experimentation purposes */ |
| static const unsigned rcv_int_timeout = 375; |
| static const unsigned rcv_int_count = 16; |
| static const unsigned sdma_idle_cnt = 64; |
| |
| /* Time to stop altering Rx Equalization parameters, after link up. */ |
| #define RXEQ_DISABLE_MSECS 2500 |
| |
| /* |
| * Number of VLs we are configured to use (to allow for more |
| * credits per vl, etc.) |
| */ |
| ushort qib_num_cfg_vls = 2; |
| module_param_named(num_vls, qib_num_cfg_vls, ushort, S_IRUGO); |
| MODULE_PARM_DESC(num_vls, "Set number of Virtual Lanes to use (1-8)"); |
| |
| static ushort qib_chase = 1; |
| module_param_named(chase, qib_chase, ushort, S_IRUGO); |
| MODULE_PARM_DESC(chase, "Enable state chase handling"); |
| |
| static ushort qib_long_atten = 10; /* 10 dB ~= 5m length */ |
| module_param_named(long_attenuation, qib_long_atten, ushort, S_IRUGO); |
| MODULE_PARM_DESC(long_attenuation, \ |
| "attenuation cutoff (dB) for long copper cable setup"); |
| |
| static ushort qib_singleport; |
| module_param_named(singleport, qib_singleport, ushort, S_IRUGO); |
| MODULE_PARM_DESC(singleport, "Use only IB port 1; more per-port buffer space"); |
| |
| static ushort qib_krcvq01_no_msi; |
| module_param_named(krcvq01_no_msi, qib_krcvq01_no_msi, ushort, S_IRUGO); |
| MODULE_PARM_DESC(krcvq01_no_msi, "No MSI for kctx < 2"); |
| |
| /* |
| * Receive header queue sizes |
| */ |
| static unsigned qib_rcvhdrcnt; |
| module_param_named(rcvhdrcnt, qib_rcvhdrcnt, uint, S_IRUGO); |
| MODULE_PARM_DESC(rcvhdrcnt, "receive header count"); |
| |
| static unsigned qib_rcvhdrsize; |
| module_param_named(rcvhdrsize, qib_rcvhdrsize, uint, S_IRUGO); |
| MODULE_PARM_DESC(rcvhdrsize, "receive header size in 32-bit words"); |
| |
| static unsigned qib_rcvhdrentsize; |
| module_param_named(rcvhdrentsize, qib_rcvhdrentsize, uint, S_IRUGO); |
| MODULE_PARM_DESC(rcvhdrentsize, "receive header entry size in 32-bit words"); |
| |
| #define MAX_ATTEN_LEN 64 /* plenty for any real system */ |
| /* for read back, default index is ~5m copper cable */ |
| static char txselect_list[MAX_ATTEN_LEN] = "10"; |
| static struct kparam_string kp_txselect = { |
| .string = txselect_list, |
| .maxlen = MAX_ATTEN_LEN |
| }; |
| static int setup_txselect(const char *, struct kernel_param *); |
| module_param_call(txselect, setup_txselect, param_get_string, |
| &kp_txselect, S_IWUSR | S_IRUGO); |
| MODULE_PARM_DESC(txselect, \ |
| "Tx serdes indices (for no QSFP or invalid QSFP data)"); |
| |
| #define BOARD_QME7342 5 |
| #define BOARD_QMH7342 6 |
| #define IS_QMH(dd) (SYM_FIELD((dd)->revision, Revision, BoardID) == \ |
| BOARD_QMH7342) |
| #define IS_QME(dd) (SYM_FIELD((dd)->revision, Revision, BoardID) == \ |
| BOARD_QME7342) |
| |
| #define KREG_IDX(regname) (QIB_7322_##regname##_OFFS / sizeof(u64)) |
| |
| #define KREG_IBPORT_IDX(regname) ((QIB_7322_##regname##_0_OFFS / sizeof(u64))) |
| |
| #define MASK_ACROSS(lsb, msb) \ |
| (((1ULL << ((msb) + 1 - (lsb))) - 1) << (lsb)) |
| |
| #define SYM_RMASK(regname, fldname) ((u64) \ |
| QIB_7322_##regname##_##fldname##_RMASK) |
| |
| #define SYM_MASK(regname, fldname) ((u64) \ |
| QIB_7322_##regname##_##fldname##_RMASK << \ |
| QIB_7322_##regname##_##fldname##_LSB) |
| |
| #define SYM_FIELD(value, regname, fldname) ((u64) \ |
| (((value) >> SYM_LSB(regname, fldname)) & \ |
| SYM_RMASK(regname, fldname))) |
| |
| /* useful for things like LaFifoEmpty_0...7, TxCreditOK_0...7, etc. */ |
| #define SYM_FIELD_ACROSS(value, regname, fldname, nbits) \ |
| (((value) >> SYM_LSB(regname, fldname)) & MASK_ACROSS(0, nbits)) |
| |
| #define HWE_MASK(fldname) SYM_MASK(HwErrMask, fldname##Mask) |
| #define ERR_MASK(fldname) SYM_MASK(ErrMask, fldname##Mask) |
| #define ERR_MASK_N(fldname) SYM_MASK(ErrMask_0, fldname##Mask) |
| #define INT_MASK(fldname) SYM_MASK(IntMask, fldname##IntMask) |
| #define INT_MASK_P(fldname, port) SYM_MASK(IntMask, fldname##IntMask##_##port) |
| /* Below because most, but not all, fields of IntMask have that full suffix */ |
| #define INT_MASK_PM(fldname, port) SYM_MASK(IntMask, fldname##Mask##_##port) |
| |
| |
| #define SYM_LSB(regname, fldname) (QIB_7322_##regname##_##fldname##_LSB) |
| |
| /* |
| * the size bits give us 2^N, in KB units. 0 marks as invalid, |
| * and 7 is reserved. We currently use only 2KB and 4KB |
| */ |
| #define IBA7322_TID_SZ_SHIFT QIB_7322_RcvTIDArray0_RT_BufSize_LSB |
| #define IBA7322_TID_SZ_2K (1UL<<IBA7322_TID_SZ_SHIFT) /* 2KB */ |
| #define IBA7322_TID_SZ_4K (2UL<<IBA7322_TID_SZ_SHIFT) /* 4KB */ |
| #define IBA7322_TID_PA_SHIFT 11U /* TID addr in chip stored w/o low bits */ |
| |
| #define SendIBSLIDAssignMask \ |
| QIB_7322_SendIBSLIDAssign_0_SendIBSLIDAssign_15_0_RMASK |
| #define SendIBSLMCMask \ |
| QIB_7322_SendIBSLIDMask_0_SendIBSLIDMask_15_0_RMASK |
| |
| #define ExtLED_IB1_YEL SYM_MASK(EXTCtrl, LEDPort0YellowOn) |
| #define ExtLED_IB1_GRN SYM_MASK(EXTCtrl, LEDPort0GreenOn) |
| #define ExtLED_IB2_YEL SYM_MASK(EXTCtrl, LEDPort1YellowOn) |
| #define ExtLED_IB2_GRN SYM_MASK(EXTCtrl, LEDPort1GreenOn) |
| #define ExtLED_IB1_MASK (ExtLED_IB1_YEL | ExtLED_IB1_GRN) |
| #define ExtLED_IB2_MASK (ExtLED_IB2_YEL | ExtLED_IB2_GRN) |
| |
| #define _QIB_GPIO_SDA_NUM 1 |
| #define _QIB_GPIO_SCL_NUM 0 |
| #define QIB_EEPROM_WEN_NUM 14 |
| #define QIB_TWSI_EEPROM_DEV 0xA2 /* All Production 7322 cards. */ |
| |
| /* HW counter clock is at 4nsec */ |
| #define QIB_7322_PSXMITWAIT_CHECK_RATE 4000 |
| |
| /* full speed IB port 1 only */ |
| #define PORT_SPD_CAP (QIB_IB_SDR | QIB_IB_DDR | QIB_IB_QDR) |
| #define PORT_SPD_CAP_SHIFT 3 |
| |
| /* full speed featuremask, both ports */ |
| #define DUAL_PORT_CAP (PORT_SPD_CAP | (PORT_SPD_CAP << PORT_SPD_CAP_SHIFT)) |
| |
| /* |
| * This file contains almost all the chip-specific register information and |
| * access functions for the FAKED QLogic InfiniPath 7322 PCI-Express chip. |
| */ |
| |
| /* Use defines to tie machine-generated names to lower-case names */ |
| #define kr_contextcnt KREG_IDX(ContextCnt) |
| #define kr_control KREG_IDX(Control) |
| #define kr_counterregbase KREG_IDX(CntrRegBase) |
| #define kr_errclear KREG_IDX(ErrClear) |
| #define kr_errmask KREG_IDX(ErrMask) |
| #define kr_errstatus KREG_IDX(ErrStatus) |
| #define kr_extctrl KREG_IDX(EXTCtrl) |
| #define kr_extstatus KREG_IDX(EXTStatus) |
| #define kr_gpio_clear KREG_IDX(GPIOClear) |
| #define kr_gpio_mask KREG_IDX(GPIOMask) |
| #define kr_gpio_out KREG_IDX(GPIOOut) |
| #define kr_gpio_status KREG_IDX(GPIOStatus) |
| #define kr_hwdiagctrl KREG_IDX(HwDiagCtrl) |
| #define kr_debugportval KREG_IDX(DebugPortValueReg) |
| #define kr_fmask KREG_IDX(feature_mask) |
| #define kr_act_fmask KREG_IDX(active_feature_mask) |
| #define kr_hwerrclear KREG_IDX(HwErrClear) |
| #define kr_hwerrmask KREG_IDX(HwErrMask) |
| #define kr_hwerrstatus KREG_IDX(HwErrStatus) |
| #define kr_intclear KREG_IDX(IntClear) |
| #define kr_intmask KREG_IDX(IntMask) |
| #define kr_intredirect KREG_IDX(IntRedirect0) |
| #define kr_intstatus KREG_IDX(IntStatus) |
| #define kr_pagealign KREG_IDX(PageAlign) |
| #define kr_rcvavailtimeout KREG_IDX(RcvAvailTimeOut0) |
| #define kr_rcvctrl KREG_IDX(RcvCtrl) /* Common, but chip also has per-port */ |
| #define kr_rcvegrbase KREG_IDX(RcvEgrBase) |
| #define kr_rcvegrcnt KREG_IDX(RcvEgrCnt) |
| #define kr_rcvhdrcnt KREG_IDX(RcvHdrCnt) |
| #define kr_rcvhdrentsize KREG_IDX(RcvHdrEntSize) |
| #define kr_rcvhdrsize KREG_IDX(RcvHdrSize) |
| #define kr_rcvtidbase KREG_IDX(RcvTIDBase) |
| #define kr_rcvtidcnt KREG_IDX(RcvTIDCnt) |
| #define kr_revision KREG_IDX(Revision) |
| #define kr_scratch KREG_IDX(Scratch) |
| #define kr_sendbuffererror KREG_IDX(SendBufErr0) /* and base for 1 and 2 */ |
| #define kr_sendcheckmask KREG_IDX(SendCheckMask0) /* and 1, 2 */ |
| #define kr_sendctrl KREG_IDX(SendCtrl) |
| #define kr_sendgrhcheckmask KREG_IDX(SendGRHCheckMask0) /* and 1, 2 */ |
| #define kr_sendibpktmask KREG_IDX(SendIBPacketMask0) /* and 1, 2 */ |
| #define kr_sendpioavailaddr KREG_IDX(SendBufAvailAddr) |
| #define kr_sendpiobufbase KREG_IDX(SendBufBase) |
| #define kr_sendpiobufcnt KREG_IDX(SendBufCnt) |
| #define kr_sendpiosize KREG_IDX(SendBufSize) |
| #define kr_sendregbase KREG_IDX(SendRegBase) |
| #define kr_sendbufavail0 KREG_IDX(SendBufAvail0) |
| #define kr_userregbase KREG_IDX(UserRegBase) |
| #define kr_intgranted KREG_IDX(Int_Granted) |
| #define kr_vecclr_wo_int KREG_IDX(vec_clr_without_int) |
| #define kr_intblocked KREG_IDX(IntBlocked) |
| #define kr_r_access KREG_IDX(SPC_JTAG_ACCESS_REG) |
| |
| /* |
| * per-port kernel registers. Access only with qib_read_kreg_port() |
| * or qib_write_kreg_port() |
| */ |
| #define krp_errclear KREG_IBPORT_IDX(ErrClear) |
| #define krp_errmask KREG_IBPORT_IDX(ErrMask) |
| #define krp_errstatus KREG_IBPORT_IDX(ErrStatus) |
| #define krp_highprio_0 KREG_IBPORT_IDX(HighPriority0) |
| #define krp_highprio_limit KREG_IBPORT_IDX(HighPriorityLimit) |
| #define krp_hrtbt_guid KREG_IBPORT_IDX(HRTBT_GUID) |
| #define krp_ib_pcsconfig KREG_IBPORT_IDX(IBPCSConfig) |
| #define krp_ibcctrl_a KREG_IBPORT_IDX(IBCCtrlA) |
| #define krp_ibcctrl_b KREG_IBPORT_IDX(IBCCtrlB) |
| #define krp_ibcctrl_c KREG_IBPORT_IDX(IBCCtrlC) |
| #define krp_ibcstatus_a KREG_IBPORT_IDX(IBCStatusA) |
| #define krp_ibcstatus_b KREG_IBPORT_IDX(IBCStatusB) |
| #define krp_txestatus KREG_IBPORT_IDX(TXEStatus) |
| #define krp_lowprio_0 KREG_IBPORT_IDX(LowPriority0) |
| #define krp_ncmodectrl KREG_IBPORT_IDX(IBNCModeCtrl) |
| #define krp_partitionkey KREG_IBPORT_IDX(RcvPartitionKey) |
| #define krp_psinterval KREG_IBPORT_IDX(PSInterval) |
| #define krp_psstart KREG_IBPORT_IDX(PSStart) |
| #define krp_psstat KREG_IBPORT_IDX(PSStat) |
| #define krp_rcvbthqp KREG_IBPORT_IDX(RcvBTHQP) |
| #define krp_rcvctrl KREG_IBPORT_IDX(RcvCtrl) |
| #define krp_rcvpktledcnt KREG_IBPORT_IDX(RcvPktLEDCnt) |
| #define krp_rcvqpmaptable KREG_IBPORT_IDX(RcvQPMapTableA) |
| #define krp_rxcreditvl0 KREG_IBPORT_IDX(RxCreditVL0) |
| #define krp_rxcreditvl15 (KREG_IBPORT_IDX(RxCreditVL0)+15) |
| #define krp_sendcheckcontrol KREG_IBPORT_IDX(SendCheckControl) |
| #define krp_sendctrl KREG_IBPORT_IDX(SendCtrl) |
| #define krp_senddmabase KREG_IBPORT_IDX(SendDmaBase) |
| #define krp_senddmabufmask0 KREG_IBPORT_IDX(SendDmaBufMask0) |
| #define krp_senddmabufmask1 (KREG_IBPORT_IDX(SendDmaBufMask0) + 1) |
| #define krp_senddmabufmask2 (KREG_IBPORT_IDX(SendDmaBufMask0) + 2) |
| #define krp_senddmabuf_use0 KREG_IBPORT_IDX(SendDmaBufUsed0) |
| #define krp_senddmabuf_use1 (KREG_IBPORT_IDX(SendDmaBufUsed0) + 1) |
| #define krp_senddmabuf_use2 (KREG_IBPORT_IDX(SendDmaBufUsed0) + 2) |
| #define krp_senddmadesccnt KREG_IBPORT_IDX(SendDmaDescCnt) |
| #define krp_senddmahead KREG_IBPORT_IDX(SendDmaHead) |
| #define krp_senddmaheadaddr KREG_IBPORT_IDX(SendDmaHeadAddr) |
| #define krp_senddmaidlecnt KREG_IBPORT_IDX(SendDmaIdleCnt) |
| #define krp_senddmalengen KREG_IBPORT_IDX(SendDmaLenGen) |
| #define krp_senddmaprioritythld KREG_IBPORT_IDX(SendDmaPriorityThld) |
| #define krp_senddmareloadcnt KREG_IBPORT_IDX(SendDmaReloadCnt) |
| #define krp_senddmastatus KREG_IBPORT_IDX(SendDmaStatus) |
| #define krp_senddmatail KREG_IBPORT_IDX(SendDmaTail) |
| #define krp_sendhdrsymptom KREG_IBPORT_IDX(SendHdrErrSymptom) |
| #define krp_sendslid KREG_IBPORT_IDX(SendIBSLIDAssign) |
| #define krp_sendslidmask KREG_IBPORT_IDX(SendIBSLIDMask) |
| #define krp_ibsdtestiftx KREG_IBPORT_IDX(IB_SDTEST_IF_TX) |
| #define krp_adapt_dis_timer KREG_IBPORT_IDX(ADAPT_DISABLE_TIMER_THRESHOLD) |
| #define krp_tx_deemph_override KREG_IBPORT_IDX(IBSD_TX_DEEMPHASIS_OVERRIDE) |
| #define krp_serdesctrl KREG_IBPORT_IDX(IBSerdesCtrl) |
| |
| /* |
| * Per-context kernel registers. Access only with qib_read_kreg_ctxt() |
| * or qib_write_kreg_ctxt() |
| */ |
| #define krc_rcvhdraddr KREG_IDX(RcvHdrAddr0) |
| #define krc_rcvhdrtailaddr KREG_IDX(RcvHdrTailAddr0) |
| |
| /* |
| * TID Flow table, per context. Reduces |
| * number of hdrq updates to one per flow (or on errors). |
| * context 0 and 1 share same memory, but have distinct |
| * addresses. Since for now, we never use expected sends |
| * on kernel contexts, we don't worry about that (we initialize |
| * those entries for ctxt 0/1 on driver load twice, for example). |
| */ |
| #define NUM_TIDFLOWS_CTXT 0x20 /* 0x20 per context; have to hardcode */ |
| #define ur_rcvflowtable (KREG_IDX(RcvTIDFlowTable0) - KREG_IDX(RcvHdrTail0)) |
| |
| /* these are the error bits in the tid flows, and are W1C */ |
| #define TIDFLOW_ERRBITS ( \ |
| (SYM_MASK(RcvTIDFlowTable0, GenMismatch) << \ |
| SYM_LSB(RcvTIDFlowTable0, GenMismatch)) | \ |
| (SYM_MASK(RcvTIDFlowTable0, SeqMismatch) << \ |
| SYM_LSB(RcvTIDFlowTable0, SeqMismatch))) |
| |
| /* Most (not all) Counters are per-IBport. |
| * Requires LBIntCnt is at offset 0 in the group |
| */ |
| #define CREG_IDX(regname) \ |
| ((QIB_7322_##regname##_0_OFFS - QIB_7322_LBIntCnt_OFFS) / sizeof(u64)) |
| |
| #define crp_badformat CREG_IDX(RxVersionErrCnt) |
| #define crp_err_rlen CREG_IDX(RxLenErrCnt) |
| #define crp_erricrc CREG_IDX(RxICRCErrCnt) |
| #define crp_errlink CREG_IDX(RxLinkMalformCnt) |
| #define crp_errlpcrc CREG_IDX(RxLPCRCErrCnt) |
| #define crp_errpkey CREG_IDX(RxPKeyMismatchCnt) |
| #define crp_errvcrc CREG_IDX(RxVCRCErrCnt) |
| #define crp_excessbufferovfl CREG_IDX(ExcessBufferOvflCnt) |
| #define crp_iblinkdown CREG_IDX(IBLinkDownedCnt) |
| #define crp_iblinkerrrecov CREG_IDX(IBLinkErrRecoveryCnt) |
| #define crp_ibstatuschange CREG_IDX(IBStatusChangeCnt) |
| #define crp_ibsymbolerr CREG_IDX(IBSymbolErrCnt) |
| #define crp_invalidrlen CREG_IDX(RxMaxMinLenErrCnt) |
| #define crp_locallinkintegrityerr CREG_IDX(LocalLinkIntegrityErrCnt) |
| #define crp_pktrcv CREG_IDX(RxDataPktCnt) |
| #define crp_pktrcvflowctrl CREG_IDX(RxFlowPktCnt) |
| #define crp_pktsend CREG_IDX(TxDataPktCnt) |
| #define crp_pktsendflow CREG_IDX(TxFlowPktCnt) |
| #define crp_psrcvdatacount CREG_IDX(PSRcvDataCount) |
| #define crp_psrcvpktscount CREG_IDX(PSRcvPktsCount) |
| #define crp_psxmitdatacount CREG_IDX(PSXmitDataCount) |
| #define crp_psxmitpktscount CREG_IDX(PSXmitPktsCount) |
| #define crp_psxmitwaitcount CREG_IDX(PSXmitWaitCount) |
| #define crp_rcvebp CREG_IDX(RxEBPCnt) |
| #define crp_rcvflowctrlviol CREG_IDX(RxFlowCtrlViolCnt) |
| #define crp_rcvovfl CREG_IDX(RxBufOvflCnt) |
| #define crp_rxdlidfltr CREG_IDX(RxDlidFltrCnt) |
| #define crp_rxdroppkt CREG_IDX(RxDroppedPktCnt) |
| #define crp_rxotherlocalphyerr CREG_IDX(RxOtherLocalPhyErrCnt) |
| #define crp_rxqpinvalidctxt CREG_IDX(RxQPInvalidContextCnt) |
| #define crp_rxvlerr CREG_IDX(RxVlErrCnt) |
| #define crp_sendstall CREG_IDX(TxFlowStallCnt) |
| #define crp_txdroppedpkt CREG_IDX(TxDroppedPktCnt) |
| #define crp_txhdrerr CREG_IDX(TxHeadersErrCnt) |
| #define crp_txlenerr CREG_IDX(TxLenErrCnt) |
| #define crp_txminmaxlenerr CREG_IDX(TxMaxMinLenErrCnt) |
| #define crp_txsdmadesc CREG_IDX(TxSDmaDescCnt) |
| #define crp_txunderrun CREG_IDX(TxUnderrunCnt) |
| #define crp_txunsupvl CREG_IDX(TxUnsupVLErrCnt) |
| #define crp_vl15droppedpkt CREG_IDX(RxVL15DroppedPktCnt) |
| #define crp_wordrcv CREG_IDX(RxDwordCnt) |
| #define crp_wordsend CREG_IDX(TxDwordCnt) |
| #define crp_tx_creditstalls CREG_IDX(TxCreditUpToDateTimeOut) |
| |
| /* these are the (few) counters that are not port-specific */ |
| #define CREG_DEVIDX(regname) ((QIB_7322_##regname##_OFFS - \ |
| QIB_7322_LBIntCnt_OFFS) / sizeof(u64)) |
| #define cr_base_egrovfl CREG_DEVIDX(RxP0HdrEgrOvflCnt) |
| #define cr_lbint CREG_DEVIDX(LBIntCnt) |
| #define cr_lbstall CREG_DEVIDX(LBFlowStallCnt) |
| #define cr_pcieretrydiag CREG_DEVIDX(PcieRetryBufDiagQwordCnt) |
| #define cr_rxtidflowdrop CREG_DEVIDX(RxTidFlowDropCnt) |
| #define cr_tidfull CREG_DEVIDX(RxTIDFullErrCnt) |
| #define cr_tidinvalid CREG_DEVIDX(RxTIDValidErrCnt) |
| |
| /* no chip register for # of IB ports supported, so define */ |
| #define NUM_IB_PORTS 2 |
| |
| /* 1 VL15 buffer per hardware IB port, no register for this, so define */ |
| #define NUM_VL15_BUFS NUM_IB_PORTS |
| |
| /* |
| * context 0 and 1 are special, and there is no chip register that |
| * defines this value, so we have to define it here. |
| * These are all allocated to either 0 or 1 for single port |
| * hardware configuration, otherwise each gets half |
| */ |
| #define KCTXT0_EGRCNT 2048 |
| |
| /* values for vl and port fields in PBC, 7322-specific */ |
| #define PBC_PORT_SEL_LSB 26 |
| #define PBC_PORT_SEL_RMASK 1 |
| #define PBC_VL_NUM_LSB 27 |
| #define PBC_VL_NUM_RMASK 7 |
| #define PBC_7322_VL15_SEND (1ULL << 63) /* pbc; VL15, no credit check */ |
| #define PBC_7322_VL15_SEND_CTRL (1ULL << 31) /* control version of same */ |
| |
| static u8 ib_rate_to_delay[IB_RATE_120_GBPS + 1] = { |
| [IB_RATE_2_5_GBPS] = 16, |
| [IB_RATE_5_GBPS] = 8, |
| [IB_RATE_10_GBPS] = 4, |
| [IB_RATE_20_GBPS] = 2, |
| [IB_RATE_30_GBPS] = 2, |
| [IB_RATE_40_GBPS] = 1 |
| }; |
| |
| #define IBA7322_LINKSPEED_SHIFT SYM_LSB(IBCStatusA_0, LinkSpeedActive) |
| #define IBA7322_LINKWIDTH_SHIFT SYM_LSB(IBCStatusA_0, LinkWidthActive) |
| |
| /* link training states, from IBC */ |
| #define IB_7322_LT_STATE_DISABLED 0x00 |
| #define IB_7322_LT_STATE_LINKUP 0x01 |
| #define IB_7322_LT_STATE_POLLACTIVE 0x02 |
| #define IB_7322_LT_STATE_POLLQUIET 0x03 |
| #define IB_7322_LT_STATE_SLEEPDELAY 0x04 |
| #define IB_7322_LT_STATE_SLEEPQUIET 0x05 |
| #define IB_7322_LT_STATE_CFGDEBOUNCE 0x08 |
| #define IB_7322_LT_STATE_CFGRCVFCFG 0x09 |
| #define IB_7322_LT_STATE_CFGWAITRMT 0x0a |
| #define IB_7322_LT_STATE_CFGIDLE 0x0b |
| #define IB_7322_LT_STATE_RECOVERRETRAIN 0x0c |
| #define IB_7322_LT_STATE_TXREVLANES 0x0d |
| #define IB_7322_LT_STATE_RECOVERWAITRMT 0x0e |
| #define IB_7322_LT_STATE_RECOVERIDLE 0x0f |
| #define IB_7322_LT_STATE_CFGENH 0x10 |
| #define IB_7322_LT_STATE_CFGTEST 0x11 |
| #define IB_7322_LT_STATE_CFGWAITRMTTEST 0x12 |
| #define IB_7322_LT_STATE_CFGWAITENH 0x13 |
| |
| /* link state machine states from IBC */ |
| #define IB_7322_L_STATE_DOWN 0x0 |
| #define IB_7322_L_STATE_INIT 0x1 |
| #define IB_7322_L_STATE_ARM 0x2 |
| #define IB_7322_L_STATE_ACTIVE 0x3 |
| #define IB_7322_L_STATE_ACT_DEFER 0x4 |
| |
| static const u8 qib_7322_physportstate[0x20] = { |
| [IB_7322_LT_STATE_DISABLED] = IB_PHYSPORTSTATE_DISABLED, |
| [IB_7322_LT_STATE_LINKUP] = IB_PHYSPORTSTATE_LINKUP, |
| [IB_7322_LT_STATE_POLLACTIVE] = IB_PHYSPORTSTATE_POLL, |
| [IB_7322_LT_STATE_POLLQUIET] = IB_PHYSPORTSTATE_POLL, |
| [IB_7322_LT_STATE_SLEEPDELAY] = IB_PHYSPORTSTATE_SLEEP, |
| [IB_7322_LT_STATE_SLEEPQUIET] = IB_PHYSPORTSTATE_SLEEP, |
| [IB_7322_LT_STATE_CFGDEBOUNCE] = IB_PHYSPORTSTATE_CFG_TRAIN, |
| [IB_7322_LT_STATE_CFGRCVFCFG] = |
| IB_PHYSPORTSTATE_CFG_TRAIN, |
| [IB_7322_LT_STATE_CFGWAITRMT] = |
| IB_PHYSPORTSTATE_CFG_TRAIN, |
| [IB_7322_LT_STATE_CFGIDLE] = IB_PHYSPORTSTATE_CFG_IDLE, |
| [IB_7322_LT_STATE_RECOVERRETRAIN] = |
| IB_PHYSPORTSTATE_LINK_ERR_RECOVER, |
| [IB_7322_LT_STATE_RECOVERWAITRMT] = |
| IB_PHYSPORTSTATE_LINK_ERR_RECOVER, |
| [IB_7322_LT_STATE_RECOVERIDLE] = |
| IB_PHYSPORTSTATE_LINK_ERR_RECOVER, |
| [IB_7322_LT_STATE_CFGENH] = IB_PHYSPORTSTATE_CFG_ENH, |
| [IB_7322_LT_STATE_CFGTEST] = IB_PHYSPORTSTATE_CFG_TRAIN, |
| [IB_7322_LT_STATE_CFGWAITRMTTEST] = |
| IB_PHYSPORTSTATE_CFG_TRAIN, |
| [IB_7322_LT_STATE_CFGWAITENH] = |
| IB_PHYSPORTSTATE_CFG_WAIT_ENH, |
| [0x14] = IB_PHYSPORTSTATE_CFG_TRAIN, |
| [0x15] = IB_PHYSPORTSTATE_CFG_TRAIN, |
| [0x16] = IB_PHYSPORTSTATE_CFG_TRAIN, |
| [0x17] = IB_PHYSPORTSTATE_CFG_TRAIN |
| }; |
| |
| struct qib_chip_specific { |
| u64 __iomem *cregbase; |
| u64 *cntrs; |
| spinlock_t rcvmod_lock; /* protect rcvctrl shadow changes */ |
| spinlock_t gpio_lock; /* RMW of shadows/regs for ExtCtrl and GPIO */ |
| u64 main_int_mask; /* clear bits which have dedicated handlers */ |
| u64 int_enable_mask; /* for per port interrupts in single port mode */ |
| u64 errormask; |
| u64 hwerrmask; |
| u64 gpio_out; /* shadow of kr_gpio_out, for rmw ops */ |
| u64 gpio_mask; /* shadow the gpio mask register */ |
| u64 extctrl; /* shadow the gpio output enable, etc... */ |
| u32 ncntrs; |
| u32 nportcntrs; |
| u32 cntrnamelen; |
| u32 portcntrnamelen; |
| u32 numctxts; |
| u32 rcvegrcnt; |
| u32 updthresh; /* current AvailUpdThld */ |
| u32 updthresh_dflt; /* default AvailUpdThld */ |
| u32 r1; |
| int irq; |
| u32 num_msix_entries; |
| u32 sdmabufcnt; |
| u32 lastbuf_for_pio; |
| u32 stay_in_freeze; |
| u32 recovery_ports_initted; |
| struct msix_entry *msix_entries; |
| void **msix_arg; |
| unsigned long *sendchkenable; |
| unsigned long *sendgrhchk; |
| unsigned long *sendibchk; |
| u32 rcvavail_timeout[18]; |
| char emsgbuf[128]; /* for device error interrupt msg buffer */ |
| }; |
| |
| /* Table of entries in "human readable" form Tx Emphasis. */ |
| struct txdds_ent { |
| u8 amp; |
| u8 pre; |
| u8 main; |
| u8 post; |
| }; |
| |
| struct vendor_txdds_ent { |
| u8 oui[QSFP_VOUI_LEN]; |
| u8 *partnum; |
| struct txdds_ent sdr; |
| struct txdds_ent ddr; |
| struct txdds_ent qdr; |
| }; |
| |
| static void write_tx_serdes_param(struct qib_pportdata *, struct txdds_ent *); |
| |
| #define TXDDS_TABLE_SZ 16 /* number of entries per speed in onchip table */ |
| #define TXDDS_EXTRA_SZ 13 /* number of extra tx settings entries */ |
| #define TXDDS_MFG_SZ 2 /* number of mfg tx settings entries */ |
| #define SERDES_CHANS 4 /* yes, it's obvious, but one less magic number */ |
| |
| #define H1_FORCE_VAL 8 |
| #define H1_FORCE_QME 1 /* may be overridden via setup_txselect() */ |
| #define H1_FORCE_QMH 7 /* may be overridden via setup_txselect() */ |
| |
| /* The static and dynamic registers are paired, and the pairs indexed by spd */ |
| #define krp_static_adapt_dis(spd) (KREG_IBPORT_IDX(ADAPT_DISABLE_STATIC_SDR) \ |
| + ((spd) * 2)) |
| |
| #define QDR_DFE_DISABLE_DELAY 4000 /* msec after LINKUP */ |
| #define QDR_STATIC_ADAPT_DOWN 0xf0f0f0f0ULL /* link down, H1-H4 QDR adapts */ |
| #define QDR_STATIC_ADAPT_DOWN_R1 0ULL /* r1 link down, H1-H4 QDR adapts */ |
| #define QDR_STATIC_ADAPT_INIT 0xffffffffffULL /* up, disable H0,H1-8, LE */ |
| #define QDR_STATIC_ADAPT_INIT_R1 0xf0ffffffffULL /* r1 up, disable H0,H1-8 */ |
| |
| struct qib_chippport_specific { |
| u64 __iomem *kpregbase; |
| u64 __iomem *cpregbase; |
| u64 *portcntrs; |
| struct qib_pportdata *ppd; |
| wait_queue_head_t autoneg_wait; |
| struct delayed_work autoneg_work; |
| struct delayed_work ipg_work; |
| struct timer_list chase_timer; |
| /* |
| * these 5 fields are used to establish deltas for IB symbol |
| * errors and linkrecovery errors. They can be reported on |
| * some chips during link negotiation prior to INIT, and with |
| * DDR when faking DDR negotiations with non-IBTA switches. |
| * The chip counters are adjusted at driver unload if there is |
| * a non-zero delta. |
| */ |
| u64 ibdeltainprog; |
| u64 ibsymdelta; |
| u64 ibsymsnap; |
| u64 iblnkerrdelta; |
| u64 iblnkerrsnap; |
| u64 iblnkdownsnap; |
| u64 iblnkdowndelta; |
| u64 ibmalfdelta; |
| u64 ibmalfsnap; |
| u64 ibcctrl_a; /* krp_ibcctrl_a shadow */ |
| u64 ibcctrl_b; /* krp_ibcctrl_b shadow */ |
| u64 qdr_dfe_time; |
| u64 chase_end; |
| u32 autoneg_tries; |
| u32 recovery_init; |
| u32 qdr_dfe_on; |
| u32 qdr_reforce; |
| /* |
| * Per-bay per-channel rcv QMH H1 values and Tx values for QDR. |
| * entry zero is unused, to simplify indexing |
| */ |
| u8 h1_val; |
| u8 no_eep; /* txselect table index to use if no qsfp info */ |
| u8 ipg_tries; |
| u8 ibmalfusesnap; |
| struct qib_qsfp_data qsfp_data; |
| char epmsgbuf[192]; /* for port error interrupt msg buffer */ |
| }; |
| |
| static struct { |
| const char *name; |
| irq_handler_t handler; |
| int lsb; |
| int port; /* 0 if not port-specific, else port # */ |
| } irq_table[] = { |
| { QIB_DRV_NAME, qib_7322intr, -1, 0 }, |
| { QIB_DRV_NAME " (buf avail)", qib_7322bufavail, |
| SYM_LSB(IntStatus, SendBufAvail), 0 }, |
| { QIB_DRV_NAME " (sdma 0)", sdma_intr, |
| SYM_LSB(IntStatus, SDmaInt_0), 1 }, |
| { QIB_DRV_NAME " (sdma 1)", sdma_intr, |
| SYM_LSB(IntStatus, SDmaInt_1), 2 }, |
| { QIB_DRV_NAME " (sdmaI 0)", sdma_idle_intr, |
| SYM_LSB(IntStatus, SDmaIdleInt_0), 1 }, |
| { QIB_DRV_NAME " (sdmaI 1)", sdma_idle_intr, |
| SYM_LSB(IntStatus, SDmaIdleInt_1), 2 }, |
| { QIB_DRV_NAME " (sdmaP 0)", sdma_progress_intr, |
| SYM_LSB(IntStatus, SDmaProgressInt_0), 1 }, |
| { QIB_DRV_NAME " (sdmaP 1)", sdma_progress_intr, |
| SYM_LSB(IntStatus, SDmaProgressInt_1), 2 }, |
| { QIB_DRV_NAME " (sdmaC 0)", sdma_cleanup_intr, |
| SYM_LSB(IntStatus, SDmaCleanupDone_0), 1 }, |
| { QIB_DRV_NAME " (sdmaC 1)", sdma_cleanup_intr, |
| SYM_LSB(IntStatus, SDmaCleanupDone_1), 2 }, |
| }; |
| |
| /* ibcctrl bits */ |
| #define QLOGIC_IB_IBCC_LINKINITCMD_DISABLE 1 |
| /* cycle through TS1/TS2 till OK */ |
| #define QLOGIC_IB_IBCC_LINKINITCMD_POLL 2 |
| /* wait for TS1, then go on */ |
| #define QLOGIC_IB_IBCC_LINKINITCMD_SLEEP 3 |
| #define QLOGIC_IB_IBCC_LINKINITCMD_SHIFT 16 |
| |
| #define QLOGIC_IB_IBCC_LINKCMD_DOWN 1 /* move to 0x11 */ |
| #define QLOGIC_IB_IBCC_LINKCMD_ARMED 2 /* move to 0x21 */ |
| #define QLOGIC_IB_IBCC_LINKCMD_ACTIVE 3 /* move to 0x31 */ |
| |
| #define BLOB_7322_IBCHG 0x101 |
| |
| static inline void qib_write_kreg(const struct qib_devdata *dd, |
| const u32 regno, u64 value); |
| static inline u32 qib_read_kreg32(const struct qib_devdata *, const u32); |
| static void write_7322_initregs(struct qib_devdata *); |
| static void write_7322_init_portregs(struct qib_pportdata *); |
| static void setup_7322_link_recovery(struct qib_pportdata *, u32); |
| static void check_7322_rxe_status(struct qib_pportdata *); |
| static u32 __iomem *qib_7322_getsendbuf(struct qib_pportdata *, u64, u32 *); |
| |
| /** |
| * qib_read_ureg32 - read 32-bit virtualized per-context register |
| * @dd: device |
| * @regno: register number |
| * @ctxt: context number |
| * |
| * Return the contents of a register that is virtualized to be per context. |
| * Returns -1 on errors (not distinguishable from valid contents at |
| * runtime; we may add a separate error variable at some point). |
| */ |
| static inline u32 qib_read_ureg32(const struct qib_devdata *dd, |
| enum qib_ureg regno, int ctxt) |
| { |
| if (!dd->kregbase || !(dd->flags & QIB_PRESENT)) |
| return 0; |
| return readl(regno + (u64 __iomem *)( |
| (dd->ureg_align * ctxt) + (dd->userbase ? |
| (char __iomem *)dd->userbase : |
| (char __iomem *)dd->kregbase + dd->uregbase))); |
| } |
| |
| /** |
| * qib_read_ureg - read virtualized per-context register |
| * @dd: device |
| * @regno: register number |
| * @ctxt: context number |
| * |
| * Return the contents of a register that is virtualized to be per context. |
| * Returns -1 on errors (not distinguishable from valid contents at |
| * runtime; we may add a separate error variable at some point). |
| */ |
| static inline u64 qib_read_ureg(const struct qib_devdata *dd, |
| enum qib_ureg regno, int ctxt) |
| { |
| |
| if (!dd->kregbase || !(dd->flags & QIB_PRESENT)) |
| return 0; |
| return readq(regno + (u64 __iomem *)( |
| (dd->ureg_align * ctxt) + (dd->userbase ? |
| (char __iomem *)dd->userbase : |
| (char __iomem *)dd->kregbase + dd->uregbase))); |
| } |
| |
| /** |
| * qib_write_ureg - write virtualized per-context register |
| * @dd: device |
| * @regno: register number |
| * @value: value |
| * @ctxt: context |
| * |
| * Write the contents of a register that is virtualized to be per context. |
| */ |
| static inline void qib_write_ureg(const struct qib_devdata *dd, |
| enum qib_ureg regno, u64 value, int ctxt) |
| { |
| u64 __iomem *ubase; |
| if (dd->userbase) |
| ubase = (u64 __iomem *) |
| ((char __iomem *) dd->userbase + |
| dd->ureg_align * ctxt); |
| else |
| ubase = (u64 __iomem *) |
| (dd->uregbase + |
| (char __iomem *) dd->kregbase + |
| dd->ureg_align * ctxt); |
| |
| if (dd->kregbase && (dd->flags & QIB_PRESENT)) |
| writeq(value, &ubase[regno]); |
| } |
| |
| static inline u32 qib_read_kreg32(const struct qib_devdata *dd, |
| const u32 regno) |
| { |
| if (!dd->kregbase || !(dd->flags & QIB_PRESENT)) |
| return -1; |
| return readl((u32 __iomem *) &dd->kregbase[regno]); |
| } |
| |
| static inline u64 qib_read_kreg64(const struct qib_devdata *dd, |
| const u32 regno) |
| { |
| if (!dd->kregbase || !(dd->flags & QIB_PRESENT)) |
| return -1; |
| return readq(&dd->kregbase[regno]); |
| } |
| |
| static inline void qib_write_kreg(const struct qib_devdata *dd, |
| const u32 regno, u64 value) |
| { |
| if (dd->kregbase && (dd->flags & QIB_PRESENT)) |
| writeq(value, &dd->kregbase[regno]); |
| } |
| |
| /* |
| * not many sanity checks for the port-specific kernel register routines, |
| * since they are only used when it's known to be safe. |
| */ |
| static inline u64 qib_read_kreg_port(const struct qib_pportdata *ppd, |
| const u16 regno) |
| { |
| if (!ppd->cpspec->kpregbase || !(ppd->dd->flags & QIB_PRESENT)) |
| return 0ULL; |
| return readq(&ppd->cpspec->kpregbase[regno]); |
| } |
| |
| static inline void qib_write_kreg_port(const struct qib_pportdata *ppd, |
| const u16 regno, u64 value) |
| { |
| if (ppd->cpspec && ppd->dd && ppd->cpspec->kpregbase && |
| (ppd->dd->flags & QIB_PRESENT)) |
| writeq(value, &ppd->cpspec->kpregbase[regno]); |
| } |
| |
| /** |
| * qib_write_kreg_ctxt - write a device's per-ctxt 64-bit kernel register |
| * @dd: the qlogic_ib device |
| * @regno: the register number to write |
| * @ctxt: the context containing the register |
| * @value: the value to write |
| */ |
| static inline void qib_write_kreg_ctxt(const struct qib_devdata *dd, |
| const u16 regno, unsigned ctxt, |
| u64 value) |
| { |
| qib_write_kreg(dd, regno + ctxt, value); |
| } |
| |
| static inline u64 read_7322_creg(const struct qib_devdata *dd, u16 regno) |
| { |
| if (!dd->cspec->cregbase || !(dd->flags & QIB_PRESENT)) |
| return 0; |
| return readq(&dd->cspec->cregbase[regno]); |
| |
| |
| } |
| |
| static inline u32 read_7322_creg32(const struct qib_devdata *dd, u16 regno) |
| { |
| if (!dd->cspec->cregbase || !(dd->flags & QIB_PRESENT)) |
| return 0; |
| return readl(&dd->cspec->cregbase[regno]); |
| |
| |
| } |
| |
| static inline void write_7322_creg_port(const struct qib_pportdata *ppd, |
| u16 regno, u64 value) |
| { |
| if (ppd->cpspec && ppd->cpspec->cpregbase && |
| (ppd->dd->flags & QIB_PRESENT)) |
| writeq(value, &ppd->cpspec->cpregbase[regno]); |
| } |
| |
| static inline u64 read_7322_creg_port(const struct qib_pportdata *ppd, |
| u16 regno) |
| { |
| if (!ppd->cpspec || !ppd->cpspec->cpregbase || |
| !(ppd->dd->flags & QIB_PRESENT)) |
| return 0; |
| return readq(&ppd->cpspec->cpregbase[regno]); |
| } |
| |
| static inline u32 read_7322_creg32_port(const struct qib_pportdata *ppd, |
| u16 regno) |
| { |
| if (!ppd->cpspec || !ppd->cpspec->cpregbase || |
| !(ppd->dd->flags & QIB_PRESENT)) |
| return 0; |
| return readl(&ppd->cpspec->cpregbase[regno]); |
| } |
| |
| /* bits in Control register */ |
| #define QLOGIC_IB_C_RESET SYM_MASK(Control, SyncReset) |
| #define QLOGIC_IB_C_SDMAFETCHPRIOEN SYM_MASK(Control, SDmaDescFetchPriorityEn) |
| |
| /* bits in general interrupt regs */ |
| #define QIB_I_RCVURG_LSB SYM_LSB(IntMask, RcvUrg0IntMask) |
| #define QIB_I_RCVURG_RMASK MASK_ACROSS(0, 17) |
| #define QIB_I_RCVURG_MASK (QIB_I_RCVURG_RMASK << QIB_I_RCVURG_LSB) |
| #define QIB_I_RCVAVAIL_LSB SYM_LSB(IntMask, RcvAvail0IntMask) |
| #define QIB_I_RCVAVAIL_RMASK MASK_ACROSS(0, 17) |
| #define QIB_I_RCVAVAIL_MASK (QIB_I_RCVAVAIL_RMASK << QIB_I_RCVAVAIL_LSB) |
| #define QIB_I_C_ERROR INT_MASK(Err) |
| |
| #define QIB_I_SPIOSENT (INT_MASK_P(SendDone, 0) | INT_MASK_P(SendDone, 1)) |
| #define QIB_I_SPIOBUFAVAIL INT_MASK(SendBufAvail) |
| #define QIB_I_GPIO INT_MASK(AssertGPIO) |
| #define QIB_I_P_SDMAINT(pidx) \ |
| (INT_MASK_P(SDma, pidx) | INT_MASK_P(SDmaIdle, pidx) | \ |
| INT_MASK_P(SDmaProgress, pidx) | \ |
| INT_MASK_PM(SDmaCleanupDone, pidx)) |
| |
| /* Interrupt bits that are "per port" */ |
| #define QIB_I_P_BITSEXTANT(pidx) \ |
| (INT_MASK_P(Err, pidx) | INT_MASK_P(SendDone, pidx) | \ |
| INT_MASK_P(SDma, pidx) | INT_MASK_P(SDmaIdle, pidx) | \ |
| INT_MASK_P(SDmaProgress, pidx) | \ |
| INT_MASK_PM(SDmaCleanupDone, pidx)) |
| |
| /* Interrupt bits that are common to a device */ |
| /* currently unused: QIB_I_SPIOSENT */ |
| #define QIB_I_C_BITSEXTANT \ |
| (QIB_I_RCVURG_MASK | QIB_I_RCVAVAIL_MASK | \ |
| QIB_I_SPIOSENT | \ |
| QIB_I_C_ERROR | QIB_I_SPIOBUFAVAIL | QIB_I_GPIO) |
| |
| #define QIB_I_BITSEXTANT (QIB_I_C_BITSEXTANT | \ |
| QIB_I_P_BITSEXTANT(0) | QIB_I_P_BITSEXTANT(1)) |
| |
| /* |
| * Error bits that are "per port". |
| */ |
| #define QIB_E_P_IBSTATUSCHANGED ERR_MASK_N(IBStatusChanged) |
| #define QIB_E_P_SHDR ERR_MASK_N(SHeadersErr) |
| #define QIB_E_P_VL15_BUF_MISUSE ERR_MASK_N(VL15BufMisuseErr) |
| #define QIB_E_P_SND_BUF_MISUSE ERR_MASK_N(SendBufMisuseErr) |
| #define QIB_E_P_SUNSUPVL ERR_MASK_N(SendUnsupportedVLErr) |
| #define QIB_E_P_SUNEXP_PKTNUM ERR_MASK_N(SendUnexpectedPktNumErr) |
| #define QIB_E_P_SDROP_DATA ERR_MASK_N(SendDroppedDataPktErr) |
| #define QIB_E_P_SDROP_SMP ERR_MASK_N(SendDroppedSmpPktErr) |
| #define QIB_E_P_SPKTLEN ERR_MASK_N(SendPktLenErr) |
| #define QIB_E_P_SUNDERRUN ERR_MASK_N(SendUnderRunErr) |
| #define QIB_E_P_SMAXPKTLEN ERR_MASK_N(SendMaxPktLenErr) |
| #define QIB_E_P_SMINPKTLEN ERR_MASK_N(SendMinPktLenErr) |
| #define QIB_E_P_RIBLOSTLINK ERR_MASK_N(RcvIBLostLinkErr) |
| #define QIB_E_P_RHDR ERR_MASK_N(RcvHdrErr) |
| #define QIB_E_P_RHDRLEN ERR_MASK_N(RcvHdrLenErr) |
| #define QIB_E_P_RBADTID ERR_MASK_N(RcvBadTidErr) |
| #define QIB_E_P_RBADVERSION ERR_MASK_N(RcvBadVersionErr) |
| #define QIB_E_P_RIBFLOW ERR_MASK_N(RcvIBFlowErr) |
| #define QIB_E_P_REBP ERR_MASK_N(RcvEBPErr) |
| #define QIB_E_P_RUNSUPVL ERR_MASK_N(RcvUnsupportedVLErr) |
| #define QIB_E_P_RUNEXPCHAR ERR_MASK_N(RcvUnexpectedCharErr) |
| #define QIB_E_P_RSHORTPKTLEN ERR_MASK_N(RcvShortPktLenErr) |
| #define QIB_E_P_RLONGPKTLEN ERR_MASK_N(RcvLongPktLenErr) |
| #define QIB_E_P_RMAXPKTLEN ERR_MASK_N(RcvMaxPktLenErr) |
| #define QIB_E_P_RMINPKTLEN ERR_MASK_N(RcvMinPktLenErr) |
| #define QIB_E_P_RICRC ERR_MASK_N(RcvICRCErr) |
| #define QIB_E_P_RVCRC ERR_MASK_N(RcvVCRCErr) |
| #define QIB_E_P_RFORMATERR ERR_MASK_N(RcvFormatErr) |
| |
| #define QIB_E_P_SDMA1STDESC ERR_MASK_N(SDma1stDescErr) |
| #define QIB_E_P_SDMABASE ERR_MASK_N(SDmaBaseErr) |
| #define QIB_E_P_SDMADESCADDRMISALIGN ERR_MASK_N(SDmaDescAddrMisalignErr) |
| #define QIB_E_P_SDMADWEN ERR_MASK_N(SDmaDwEnErr) |
| #define QIB_E_P_SDMAGENMISMATCH ERR_MASK_N(SDmaGenMismatchErr) |
| #define QIB_E_P_SDMAHALT ERR_MASK_N(SDmaHaltErr) |
| #define QIB_E_P_SDMAMISSINGDW ERR_MASK_N(SDmaMissingDwErr) |
| #define QIB_E_P_SDMAOUTOFBOUND ERR_MASK_N(SDmaOutOfBoundErr) |
| #define QIB_E_P_SDMARPYTAG ERR_MASK_N(SDmaRpyTagErr) |
| #define QIB_E_P_SDMATAILOUTOFBOUND ERR_MASK_N(SDmaTailOutOfBoundErr) |
| #define QIB_E_P_SDMAUNEXPDATA ERR_MASK_N(SDmaUnexpDataErr) |
| |
| /* Error bits that are common to a device */ |
| #define QIB_E_RESET ERR_MASK(ResetNegated) |
| #define QIB_E_HARDWARE ERR_MASK(HardwareErr) |
| #define QIB_E_INVALIDADDR ERR_MASK(InvalidAddrErr) |
| |
| |
| /* |
| * Per chip (rather than per-port) errors. Most either do |
| * nothing but trigger a print (because they self-recover, or |
| * always occur in tandem with other errors that handle the |
| * issue), or because they indicate errors with no recovery, |
| * but we want to know that they happened. |
| */ |
| #define QIB_E_SBUF_VL15_MISUSE ERR_MASK(SBufVL15MisUseErr) |
| #define QIB_E_BADEEP ERR_MASK(InvalidEEPCmd) |
| #define QIB_E_VLMISMATCH ERR_MASK(SendVLMismatchErr) |
| #define QIB_E_ARMLAUNCH ERR_MASK(SendArmLaunchErr) |
| #define QIB_E_SPCLTRIG ERR_MASK(SendSpecialTriggerErr) |
| #define QIB_E_RRCVHDRFULL ERR_MASK(RcvHdrFullErr) |
| #define QIB_E_RRCVEGRFULL ERR_MASK(RcvEgrFullErr) |
| #define QIB_E_RCVCTXTSHARE ERR_MASK(RcvContextShareErr) |
| |
| /* SDMA chip errors (not per port) |
| * QIB_E_SDMA_BUF_DUP needs no special handling, because we will also get |
| * the SDMAHALT error immediately, so we just print the dup error via the |
| * E_AUTO mechanism. This is true of most of the per-port fatal errors |
| * as well, but since this is port-independent, by definition, it's |
| * handled a bit differently. SDMA_VL15 and SDMA_WRONG_PORT are per |
| * packet send errors, and so are handled in the same manner as other |
| * per-packet errors. |
| */ |
| #define QIB_E_SDMA_VL15 ERR_MASK(SDmaVL15Err) |
| #define QIB_E_SDMA_WRONG_PORT ERR_MASK(SDmaWrongPortErr) |
| #define QIB_E_SDMA_BUF_DUP ERR_MASK(SDmaBufMaskDuplicateErr) |
| |
| /* |
| * Below functionally equivalent to legacy QLOGIC_IB_E_PKTERRS |
| * it is used to print "common" packet errors. |
| */ |
| #define QIB_E_P_PKTERRS (QIB_E_P_SPKTLEN |\ |
| QIB_E_P_SDROP_DATA | QIB_E_P_RVCRC |\ |
| QIB_E_P_RICRC | QIB_E_P_RSHORTPKTLEN |\ |
| QIB_E_P_VL15_BUF_MISUSE | QIB_E_P_SHDR | \ |
| QIB_E_P_REBP) |
| |
| /* Error Bits that Packet-related (Receive, per-port) */ |
| #define QIB_E_P_RPKTERRS (\ |
| QIB_E_P_RHDRLEN | QIB_E_P_RBADTID | \ |
| QIB_E_P_RBADVERSION | QIB_E_P_RHDR | \ |
| QIB_E_P_RLONGPKTLEN | QIB_E_P_RSHORTPKTLEN |\ |
| QIB_E_P_RMAXPKTLEN | QIB_E_P_RMINPKTLEN | \ |
| QIB_E_P_RFORMATERR | QIB_E_P_RUNSUPVL | \ |
| QIB_E_P_RUNEXPCHAR | QIB_E_P_RIBFLOW | QIB_E_P_REBP) |
| |
| /* |
| * Error bits that are Send-related (per port) |
| * (ARMLAUNCH excluded from E_SPKTERRS because it gets special handling). |
| * All of these potentially need to have a buffer disarmed |
| */ |
| #define QIB_E_P_SPKTERRS (\ |
| QIB_E_P_SUNEXP_PKTNUM |\ |
| QIB_E_P_SDROP_DATA | QIB_E_P_SDROP_SMP |\ |
| QIB_E_P_SMAXPKTLEN |\ |
| QIB_E_P_VL15_BUF_MISUSE | QIB_E_P_SHDR | \ |
| QIB_E_P_SMINPKTLEN | QIB_E_P_SPKTLEN | \ |
| QIB_E_P_SND_BUF_MISUSE | QIB_E_P_SUNSUPVL) |
| |
| #define QIB_E_SPKTERRS ( \ |
| QIB_E_SBUF_VL15_MISUSE | QIB_E_VLMISMATCH | \ |
| ERR_MASK_N(SendUnsupportedVLErr) | \ |
| QIB_E_SPCLTRIG | QIB_E_SDMA_VL15 | QIB_E_SDMA_WRONG_PORT) |
| |
| #define QIB_E_P_SDMAERRS ( \ |
| QIB_E_P_SDMAHALT | \ |
| QIB_E_P_SDMADESCADDRMISALIGN | \ |
| QIB_E_P_SDMAUNEXPDATA | \ |
| QIB_E_P_SDMAMISSINGDW | \ |
| QIB_E_P_SDMADWEN | \ |
| QIB_E_P_SDMARPYTAG | \ |
| QIB_E_P_SDMA1STDESC | \ |
| QIB_E_P_SDMABASE | \ |
| QIB_E_P_SDMATAILOUTOFBOUND | \ |
| QIB_E_P_SDMAOUTOFBOUND | \ |
| QIB_E_P_SDMAGENMISMATCH) |
| |
| /* |
| * This sets some bits more than once, but makes it more obvious which |
| * bits are not handled under other categories, and the repeat definition |
| * is not a problem. |
| */ |
| #define QIB_E_P_BITSEXTANT ( \ |
| QIB_E_P_SPKTERRS | QIB_E_P_PKTERRS | QIB_E_P_RPKTERRS | \ |
| QIB_E_P_RIBLOSTLINK | QIB_E_P_IBSTATUSCHANGED | \ |
| QIB_E_P_SND_BUF_MISUSE | QIB_E_P_SUNDERRUN | \ |
| QIB_E_P_SHDR | QIB_E_P_VL15_BUF_MISUSE | QIB_E_P_SDMAERRS \ |
| ) |
| |
| /* |
| * These are errors that can occur when the link |
| * changes state while a packet is being sent or received. This doesn't |
| * cover things like EBP or VCRC that can be the result of a sending |
| * having the link change state, so we receive a "known bad" packet. |
| * All of these are "per port", so renamed: |
| */ |
| #define QIB_E_P_LINK_PKTERRS (\ |
| QIB_E_P_SDROP_DATA | QIB_E_P_SDROP_SMP |\ |
| QIB_E_P_SMINPKTLEN | QIB_E_P_SPKTLEN |\ |
| QIB_E_P_RSHORTPKTLEN | QIB_E_P_RMINPKTLEN |\ |
| QIB_E_P_RUNEXPCHAR) |
| |
| /* |
| * This sets some bits more than once, but makes it more obvious which |
| * bits are not handled under other categories (such as QIB_E_SPKTERRS), |
| * and the repeat definition is not a problem. |
| */ |
| #define QIB_E_C_BITSEXTANT (\ |
| QIB_E_HARDWARE | QIB_E_INVALIDADDR | QIB_E_BADEEP |\ |
| QIB_E_ARMLAUNCH | QIB_E_VLMISMATCH | QIB_E_RRCVHDRFULL |\ |
| QIB_E_RRCVEGRFULL | QIB_E_RESET | QIB_E_SBUF_VL15_MISUSE) |
| |
| /* Likewise Neuter E_SPKT_ERRS_IGNORE */ |
| #define E_SPKT_ERRS_IGNORE 0 |
| |
| #define QIB_EXTS_MEMBIST_DISABLED \ |
| SYM_MASK(EXTStatus, MemBISTDisabled) |
| #define QIB_EXTS_MEMBIST_ENDTEST \ |
| SYM_MASK(EXTStatus, MemBISTEndTest) |
| |
| #define QIB_E_SPIOARMLAUNCH \ |
| ERR_MASK(SendArmLaunchErr) |
| |
| #define IBA7322_IBCC_LINKINITCMD_MASK SYM_RMASK(IBCCtrlA_0, LinkInitCmd) |
| #define IBA7322_IBCC_LINKCMD_SHIFT SYM_LSB(IBCCtrlA_0, LinkCmd) |
| |
| /* |
| * IBTA_1_2 is set when multiple speeds are enabled (normal), |
| * and also if forced QDR (only QDR enabled). It's enabled for the |
| * forced QDR case so that scrambling will be enabled by the TS3 |
| * exchange, when supported by both sides of the link. |
| */ |
| #define IBA7322_IBC_IBTA_1_2_MASK SYM_MASK(IBCCtrlB_0, IB_ENHANCED_MODE) |
| #define IBA7322_IBC_MAX_SPEED_MASK SYM_MASK(IBCCtrlB_0, SD_SPEED) |
| #define IBA7322_IBC_SPEED_QDR SYM_MASK(IBCCtrlB_0, SD_SPEED_QDR) |
| #define IBA7322_IBC_SPEED_DDR SYM_MASK(IBCCtrlB_0, SD_SPEED_DDR) |
| #define IBA7322_IBC_SPEED_SDR SYM_MASK(IBCCtrlB_0, SD_SPEED_SDR) |
| #define IBA7322_IBC_SPEED_MASK (SYM_MASK(IBCCtrlB_0, SD_SPEED_SDR) | \ |
| SYM_MASK(IBCCtrlB_0, SD_SPEED_DDR) | SYM_MASK(IBCCtrlB_0, SD_SPEED_QDR)) |
| #define IBA7322_IBC_SPEED_LSB SYM_LSB(IBCCtrlB_0, SD_SPEED_SDR) |
| |
| #define IBA7322_LEDBLINK_OFF_SHIFT SYM_LSB(RcvPktLEDCnt_0, OFFperiod) |
| #define IBA7322_LEDBLINK_ON_SHIFT SYM_LSB(RcvPktLEDCnt_0, ONperiod) |
| |
| #define IBA7322_IBC_WIDTH_AUTONEG SYM_MASK(IBCCtrlB_0, IB_NUM_CHANNELS) |
| #define IBA7322_IBC_WIDTH_4X_ONLY (1<<SYM_LSB(IBCCtrlB_0, IB_NUM_CHANNELS)) |
| #define IBA7322_IBC_WIDTH_1X_ONLY (0<<SYM_LSB(IBCCtrlB_0, IB_NUM_CHANNELS)) |
| |
| #define IBA7322_IBC_RXPOL_MASK SYM_MASK(IBCCtrlB_0, IB_POLARITY_REV_SUPP) |
| #define IBA7322_IBC_RXPOL_LSB SYM_LSB(IBCCtrlB_0, IB_POLARITY_REV_SUPP) |
| #define IBA7322_IBC_HRTBT_MASK (SYM_MASK(IBCCtrlB_0, HRTBT_AUTO) | \ |
| SYM_MASK(IBCCtrlB_0, HRTBT_ENB)) |
| #define IBA7322_IBC_HRTBT_RMASK (IBA7322_IBC_HRTBT_MASK >> \ |
| SYM_LSB(IBCCtrlB_0, HRTBT_ENB)) |
| #define IBA7322_IBC_HRTBT_LSB SYM_LSB(IBCCtrlB_0, HRTBT_ENB) |
| |
| #define IBA7322_REDIRECT_VEC_PER_REG 12 |
| |
| #define IBA7322_SENDCHK_PKEY SYM_MASK(SendCheckControl_0, PKey_En) |
| #define IBA7322_SENDCHK_BTHQP SYM_MASK(SendCheckControl_0, BTHQP_En) |
| #define IBA7322_SENDCHK_SLID SYM_MASK(SendCheckControl_0, SLID_En) |
| #define IBA7322_SENDCHK_RAW_IPV6 SYM_MASK(SendCheckControl_0, RawIPV6_En) |
| #define IBA7322_SENDCHK_MINSZ SYM_MASK(SendCheckControl_0, PacketTooSmall_En) |
| |
| #define AUTONEG_TRIES 3 /* sequential retries to negotiate DDR */ |
| |
| #define HWE_AUTO(fldname) { .mask = SYM_MASK(HwErrMask, fldname##Mask), \ |
| .msg = #fldname , .sz = sizeof(#fldname) } |
| #define HWE_AUTO_P(fldname, port) { .mask = SYM_MASK(HwErrMask, \ |
| fldname##Mask##_##port), .msg = #fldname , .sz = sizeof(#fldname) } |
| static const struct qib_hwerror_msgs qib_7322_hwerror_msgs[] = { |
| HWE_AUTO_P(IBSerdesPClkNotDetect, 1), |
| HWE_AUTO_P(IBSerdesPClkNotDetect, 0), |
| HWE_AUTO(PCIESerdesPClkNotDetect), |
| HWE_AUTO(PowerOnBISTFailed), |
| HWE_AUTO(TempsenseTholdReached), |
| HWE_AUTO(MemoryErr), |
| HWE_AUTO(PCIeBusParityErr), |
| HWE_AUTO(PcieCplTimeout), |
| HWE_AUTO(PciePoisonedTLP), |
| HWE_AUTO_P(SDmaMemReadErr, 1), |
| HWE_AUTO_P(SDmaMemReadErr, 0), |
| HWE_AUTO_P(IBCBusFromSPCParityErr, 1), |
| HWE_AUTO_P(IBCBusToSPCParityErr, 1), |
| HWE_AUTO_P(IBCBusFromSPCParityErr, 0), |
| HWE_AUTO(statusValidNoEop), |
| HWE_AUTO(LATriggered), |
| { .mask = 0, .sz = 0 } |
| }; |
| |
| #define E_AUTO(fldname) { .mask = SYM_MASK(ErrMask, fldname##Mask), \ |
| .msg = #fldname, .sz = sizeof(#fldname) } |
| #define E_P_AUTO(fldname) { .mask = SYM_MASK(ErrMask_0, fldname##Mask), \ |
| .msg = #fldname, .sz = sizeof(#fldname) } |
| static const struct qib_hwerror_msgs qib_7322error_msgs[] = { |
| E_AUTO(RcvEgrFullErr), |
| E_AUTO(RcvHdrFullErr), |
| E_AUTO(ResetNegated), |
| E_AUTO(HardwareErr), |
| E_AUTO(InvalidAddrErr), |
| E_AUTO(SDmaVL15Err), |
| E_AUTO(SBufVL15MisUseErr), |
| E_AUTO(InvalidEEPCmd), |
| E_AUTO(RcvContextShareErr), |
| E_AUTO(SendVLMismatchErr), |
| E_AUTO(SendArmLaunchErr), |
| E_AUTO(SendSpecialTriggerErr), |
| E_AUTO(SDmaWrongPortErr), |
| E_AUTO(SDmaBufMaskDuplicateErr), |
| { .mask = 0, .sz = 0 } |
| }; |
| |
| static const struct qib_hwerror_msgs qib_7322p_error_msgs[] = { |
| E_P_AUTO(IBStatusChanged), |
| E_P_AUTO(SHeadersErr), |
| E_P_AUTO(VL15BufMisuseErr), |
| /* |
| * SDmaHaltErr is not really an error, make it clearer; |
| */ |
| {.mask = SYM_MASK(ErrMask_0, SDmaHaltErrMask), .msg = "SDmaHalted", |
| .sz = 11}, |
| E_P_AUTO(SDmaDescAddrMisalignErr), |
| E_P_AUTO(SDmaUnexpDataErr), |
| E_P_AUTO(SDmaMissingDwErr), |
| E_P_AUTO(SDmaDwEnErr), |
| E_P_AUTO(SDmaRpyTagErr), |
| E_P_AUTO(SDma1stDescErr), |
| E_P_AUTO(SDmaBaseErr), |
| E_P_AUTO(SDmaTailOutOfBoundErr), |
| E_P_AUTO(SDmaOutOfBoundErr), |
| E_P_AUTO(SDmaGenMismatchErr), |
| E_P_AUTO(SendBufMisuseErr), |
| E_P_AUTO(SendUnsupportedVLErr), |
| E_P_AUTO(SendUnexpectedPktNumErr), |
| E_P_AUTO(SendDroppedDataPktErr), |
| E_P_AUTO(SendDroppedSmpPktErr), |
| E_P_AUTO(SendPktLenErr), |
| E_P_AUTO(SendUnderRunErr), |
| E_P_AUTO(SendMaxPktLenErr), |
| E_P_AUTO(SendMinPktLenErr), |
| E_P_AUTO(RcvIBLostLinkErr), |
| E_P_AUTO(RcvHdrErr), |
| E_P_AUTO(RcvHdrLenErr), |
| E_P_AUTO(RcvBadTidErr), |
| E_P_AUTO(RcvBadVersionErr), |
| E_P_AUTO(RcvIBFlowErr), |
| E_P_AUTO(RcvEBPErr), |
| E_P_AUTO(RcvUnsupportedVLErr), |
| E_P_AUTO(RcvUnexpectedCharErr), |
| E_P_AUTO(RcvShortPktLenErr), |
| E_P_AUTO(RcvLongPktLenErr), |
| E_P_AUTO(RcvMaxPktLenErr), |
| E_P_AUTO(RcvMinPktLenErr), |
| E_P_AUTO(RcvICRCErr), |
| E_P_AUTO(RcvVCRCErr), |
| E_P_AUTO(RcvFormatErr), |
| { .mask = 0, .sz = 0 } |
| }; |
| |
| /* |
| * Below generates "auto-message" for interrupts not specific to any port or |
| * context |
| */ |
| #define INTR_AUTO(fldname) { .mask = SYM_MASK(IntMask, fldname##Mask), \ |
| .msg = #fldname, .sz = sizeof(#fldname) } |
| /* Below generates "auto-message" for interrupts specific to a port */ |
| #define INTR_AUTO_P(fldname) { .mask = MASK_ACROSS(\ |
| SYM_LSB(IntMask, fldname##Mask##_0), \ |
| SYM_LSB(IntMask, fldname##Mask##_1)), \ |
| .msg = #fldname "_P", .sz = sizeof(#fldname "_P") } |
| /* For some reason, the SerDesTrimDone bits are reversed */ |
| #define INTR_AUTO_PI(fldname) { .mask = MASK_ACROSS(\ |
| SYM_LSB(IntMask, fldname##Mask##_1), \ |
| SYM_LSB(IntMask, fldname##Mask##_0)), \ |
| .msg = #fldname "_P", .sz = sizeof(#fldname "_P") } |
| /* |
| * Below generates "auto-message" for interrupts specific to a context, |
| * with ctxt-number appended |
| */ |
| #define INTR_AUTO_C(fldname) { .mask = MASK_ACROSS(\ |
| SYM_LSB(IntMask, fldname##0IntMask), \ |
| SYM_LSB(IntMask, fldname##17IntMask)), \ |
| .msg = #fldname "_C", .sz = sizeof(#fldname "_C") } |
| |
| static const struct qib_hwerror_msgs qib_7322_intr_msgs[] = { |
| INTR_AUTO_P(SDmaInt), |
| INTR_AUTO_P(SDmaProgressInt), |
| INTR_AUTO_P(SDmaIdleInt), |
| INTR_AUTO_P(SDmaCleanupDone), |
| INTR_AUTO_C(RcvUrg), |
| INTR_AUTO_P(ErrInt), |
| INTR_AUTO(ErrInt), /* non-port-specific errs */ |
| INTR_AUTO(AssertGPIOInt), |
| INTR_AUTO_P(SendDoneInt), |
| INTR_AUTO(SendBufAvailInt), |
| INTR_AUTO_C(RcvAvail), |
| { .mask = 0, .sz = 0 } |
| }; |
| |
| #define TXSYMPTOM_AUTO_P(fldname) \ |
| { .mask = SYM_MASK(SendHdrErrSymptom_0, fldname), \ |
| .msg = #fldname, .sz = sizeof(#fldname) } |
| static const struct qib_hwerror_msgs hdrchk_msgs[] = { |
| TXSYMPTOM_AUTO_P(NonKeyPacket), |
| TXSYMPTOM_AUTO_P(GRHFail), |
| TXSYMPTOM_AUTO_P(PkeyFail), |
| TXSYMPTOM_AUTO_P(QPFail), |
| TXSYMPTOM_AUTO_P(SLIDFail), |
| TXSYMPTOM_AUTO_P(RawIPV6), |
| TXSYMPTOM_AUTO_P(PacketTooSmall), |
| { .mask = 0, .sz = 0 } |
| }; |
| |
| #define IBA7322_HDRHEAD_PKTINT_SHIFT 32 /* interrupt cnt in upper 32 bits */ |
| |
| /* |
| * Called when we might have an error that is specific to a particular |
| * PIO buffer, and may need to cancel that buffer, so it can be re-used, |
| * because we don't need to force the update of pioavail |
| */ |
| static void qib_disarm_7322_senderrbufs(struct qib_pportdata *ppd) |
| { |
| struct qib_devdata *dd = ppd->dd; |
| u32 i; |
| int any; |
| u32 piobcnt = dd->piobcnt2k + dd->piobcnt4k + NUM_VL15_BUFS; |
| u32 regcnt = (piobcnt + BITS_PER_LONG - 1) / BITS_PER_LONG; |
| unsigned long sbuf[4]; |
| |
| /* |
| * It's possible that sendbuffererror could have bits set; might |
| * have already done this as a result of hardware error handling. |
| */ |
| any = 0; |
| for (i = 0; i < regcnt; ++i) { |
| sbuf[i] = qib_read_kreg64(dd, kr_sendbuffererror + i); |
| if (sbuf[i]) { |
| any = 1; |
| qib_write_kreg(dd, kr_sendbuffererror + i, sbuf[i]); |
| } |
| } |
| |
| if (any) |
| qib_disarm_piobufs_set(dd, sbuf, piobcnt); |
| } |
| |
| /* No txe_recover yet, if ever */ |
| |
| /* No decode__errors yet */ |
| static void err_decode(char *msg, size_t len, u64 errs, |
| const struct qib_hwerror_msgs *msp) |
| { |
| u64 these, lmask; |
| int took, multi, n = 0; |
| |
| while (errs && msp && msp->mask) { |
| multi = (msp->mask & (msp->mask - 1)); |
| while (errs & msp->mask) { |
| these = (errs & msp->mask); |
| lmask = (these & (these - 1)) ^ these; |
| if (len) { |
| if (n++) { |
| /* separate the strings */ |
| *msg++ = ','; |
| len--; |
| } |
| BUG_ON(!msp->sz); |
| /* msp->sz counts the nul */ |
| took = min_t(size_t, msp->sz - (size_t)1, len); |
| memcpy(msg, msp->msg, took); |
| len -= took; |
| msg += took; |
| if (len) |
| *msg = '\0'; |
| } |
| errs &= ~lmask; |
| if (len && multi) { |
| /* More than one bit this mask */ |
| int idx = -1; |
| |
| while (lmask & msp->mask) { |
| ++idx; |
| lmask >>= 1; |
| } |
| took = scnprintf(msg, len, "_%d", idx); |
| len -= took; |
| msg += took; |
| } |
| } |
| ++msp; |
| } |
| /* If some bits are left, show in hex. */ |
| if (len && errs) |
| snprintf(msg, len, "%sMORE:%llX", n ? "," : "", |
| (unsigned long long) errs); |
| } |
| |
| /* only called if r1 set */ |
| static void flush_fifo(struct qib_pportdata *ppd) |
| { |
| struct qib_devdata *dd = ppd->dd; |
| u32 __iomem *piobuf; |
| u32 bufn; |
| u32 *hdr; |
| u64 pbc; |
| const unsigned hdrwords = 7; |
| static struct qib_ib_header ibhdr = { |
| .lrh[0] = cpu_to_be16(0xF000 | QIB_LRH_BTH), |
| .lrh[1] = IB_LID_PERMISSIVE, |
| .lrh[2] = cpu_to_be16(hdrwords + SIZE_OF_CRC), |
| .lrh[3] = IB_LID_PERMISSIVE, |
| .u.oth.bth[0] = cpu_to_be32( |
| (IB_OPCODE_UD_SEND_ONLY << 24) | QIB_DEFAULT_P_KEY), |
| .u.oth.bth[1] = cpu_to_be32(0), |
| .u.oth.bth[2] = cpu_to_be32(0), |
| .u.oth.u.ud.deth[0] = cpu_to_be32(0), |
| .u.oth.u.ud.deth[1] = cpu_to_be32(0), |
| }; |
| |
| /* |
| * Send a dummy VL15 packet to flush the launch FIFO. |
| * This will not actually be sent since the TxeBypassIbc bit is set. |
| */ |
| pbc = PBC_7322_VL15_SEND | |
| (((u64)ppd->hw_pidx) << (PBC_PORT_SEL_LSB + 32)) | |
| (hdrwords + SIZE_OF_CRC); |
| piobuf = qib_7322_getsendbuf(ppd, pbc, &bufn); |
| if (!piobuf) |
| return; |
| writeq(pbc, piobuf); |
| hdr = (u32 *) &ibhdr; |
| if (dd->flags & QIB_PIO_FLUSH_WC) { |
| qib_flush_wc(); |
| qib_pio_copy(piobuf + 2, hdr, hdrwords - 1); |
| qib_flush_wc(); |
| __raw_writel(hdr[hdrwords - 1], piobuf + hdrwords + 1); |
| qib_flush_wc(); |
| } else |
| qib_pio_copy(piobuf + 2, hdr, hdrwords); |
| qib_sendbuf_done(dd, bufn); |
| } |
| |
| /* |
| * This is called with interrupts disabled and sdma_lock held. |
| */ |
| static void qib_7322_sdma_sendctrl(struct qib_pportdata *ppd, unsigned op) |
| { |
| struct qib_devdata *dd = ppd->dd; |
| u64 set_sendctrl = 0; |
| u64 clr_sendctrl = 0; |
| |
| if (op & QIB_SDMA_SENDCTRL_OP_ENABLE) |
| set_sendctrl |= SYM_MASK(SendCtrl_0, SDmaEnable); |
| else |
| clr_sendctrl |= SYM_MASK(SendCtrl_0, SDmaEnable); |
| |
| if (op & QIB_SDMA_SENDCTRL_OP_INTENABLE) |
| set_sendctrl |= SYM_MASK(SendCtrl_0, SDmaIntEnable); |
| else |
| clr_sendctrl |= SYM_MASK(SendCtrl_0, SDmaIntEnable); |
| |
| if (op & QIB_SDMA_SENDCTRL_OP_HALT) |
| set_sendctrl |= SYM_MASK(SendCtrl_0, SDmaHalt); |
| else |
| clr_sendctrl |= SYM_MASK(SendCtrl_0, SDmaHalt); |
| |
| if (op & QIB_SDMA_SENDCTRL_OP_DRAIN) |
| set_sendctrl |= SYM_MASK(SendCtrl_0, TxeBypassIbc) | |
| SYM_MASK(SendCtrl_0, TxeAbortIbc) | |
| SYM_MASK(SendCtrl_0, TxeDrainRmFifo); |
| else |
| clr_sendctrl |= SYM_MASK(SendCtrl_0, TxeBypassIbc) | |
| SYM_MASK(SendCtrl_0, TxeAbortIbc) | |
| SYM_MASK(SendCtrl_0, TxeDrainRmFifo); |
| |
| spin_lock(&dd->sendctrl_lock); |
| |
| /* If we are draining everything, block sends first */ |
| if (op & QIB_SDMA_SENDCTRL_OP_DRAIN) { |
| ppd->p_sendctrl &= ~SYM_MASK(SendCtrl_0, SendEnable); |
| qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl); |
| qib_write_kreg(dd, kr_scratch, 0); |
| } |
| |
| ppd->p_sendctrl |= set_sendctrl; |
| ppd->p_sendctrl &= ~clr_sendctrl; |
| |
| if (op & QIB_SDMA_SENDCTRL_OP_CLEANUP) |
| qib_write_kreg_port(ppd, krp_sendctrl, |
| ppd->p_sendctrl | |
| SYM_MASK(SendCtrl_0, SDmaCleanup)); |
| else |
| qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl); |
| qib_write_kreg(dd, kr_scratch, 0); |
| |
| if (op & QIB_SDMA_SENDCTRL_OP_DRAIN) { |
| ppd->p_sendctrl |= SYM_MASK(SendCtrl_0, SendEnable); |
| qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl); |
| qib_write_kreg(dd, kr_scratch, 0); |
| } |
| |
| spin_unlock(&dd->sendctrl_lock); |
| |
| if ((op & QIB_SDMA_SENDCTRL_OP_DRAIN) && ppd->dd->cspec->r1) |
| flush_fifo(ppd); |
| } |
| |
| static void qib_7322_sdma_hw_clean_up(struct qib_pportdata *ppd) |
| { |
| __qib_sdma_process_event(ppd, qib_sdma_event_e50_hw_cleaned); |
| } |
| |
| static void qib_sdma_7322_setlengen(struct qib_pportdata *ppd) |
| { |
| /* |
| * Set SendDmaLenGen and clear and set |
| * the MSB of the generation count to enable generation checking |
| * and load the internal generation counter. |
| */ |
| qib_write_kreg_port(ppd, krp_senddmalengen, ppd->sdma_descq_cnt); |
| qib_write_kreg_port(ppd, krp_senddmalengen, |
| ppd->sdma_descq_cnt | |
| (1ULL << QIB_7322_SendDmaLenGen_0_Generation_MSB)); |
| } |
| |
| /* |
| * Must be called with sdma_lock held, or before init finished. |
| */ |
| static void qib_sdma_update_7322_tail(struct qib_pportdata *ppd, u16 tail) |
| { |
| /* Commit writes to memory and advance the tail on the chip */ |
| wmb(); |
| ppd->sdma_descq_tail = tail; |
| qib_write_kreg_port(ppd, krp_senddmatail, tail); |
| } |
| |
| /* |
| * This is called with interrupts disabled and sdma_lock held. |
| */ |
| static void qib_7322_sdma_hw_start_up(struct qib_pportdata *ppd) |
| { |
| /* |
| * Drain all FIFOs. |
| * The hardware doesn't require this but we do it so that verbs |
| * and user applications don't wait for link active to send stale |
| * data. |
| */ |
| sendctrl_7322_mod(ppd, QIB_SENDCTRL_FLUSH); |
| |
| qib_sdma_7322_setlengen(ppd); |
| qib_sdma_update_7322_tail(ppd, 0); /* Set SendDmaTail */ |
| ppd->sdma_head_dma[0] = 0; |
| qib_7322_sdma_sendctrl(ppd, |
| ppd->sdma_state.current_op | QIB_SDMA_SENDCTRL_OP_CLEANUP); |
| } |
| |
| #define DISABLES_SDMA ( \ |
| QIB_E_P_SDMAHALT | \ |
| QIB_E_P_SDMADESCADDRMISALIGN | \ |
| QIB_E_P_SDMAMISSINGDW | \ |
| QIB_E_P_SDMADWEN | \ |
| QIB_E_P_SDMARPYTAG | \ |
| QIB_E_P_SDMA1STDESC | \ |
| QIB_E_P_SDMABASE | \ |
| QIB_E_P_SDMATAILOUTOFBOUND | \ |
| QIB_E_P_SDMAOUTOFBOUND | \ |
| QIB_E_P_SDMAGENMISMATCH) |
| |
| static void sdma_7322_p_errors(struct qib_pportdata *ppd, u64 errs) |
| { |
| unsigned long flags; |
| struct qib_devdata *dd = ppd->dd; |
| |
| errs &= QIB_E_P_SDMAERRS; |
| |
| if (errs & QIB_E_P_SDMAUNEXPDATA) |
| qib_dev_err(dd, "IB%u:%u SDmaUnexpData\n", dd->unit, |
| ppd->port); |
| |
| spin_lock_irqsave(&ppd->sdma_lock, flags); |
| |
| switch (ppd->sdma_state.current_state) { |
| case qib_sdma_state_s00_hw_down: |
| break; |
| |
| case qib_sdma_state_s10_hw_start_up_wait: |
| if (errs & QIB_E_P_SDMAHALT) |
| __qib_sdma_process_event(ppd, |
| qib_sdma_event_e20_hw_started); |
| break; |
| |
| case qib_sdma_state_s20_idle: |
| break; |
| |
| case qib_sdma_state_s30_sw_clean_up_wait: |
| break; |
| |
| case qib_sdma_state_s40_hw_clean_up_wait: |
| if (errs & QIB_E_P_SDMAHALT) |
| __qib_sdma_process_event(ppd, |
| qib_sdma_event_e50_hw_cleaned); |
| break; |
| |
| case qib_sdma_state_s50_hw_halt_wait: |
| if (errs & QIB_E_P_SDMAHALT) |
| __qib_sdma_process_event(ppd, |
| qib_sdma_event_e60_hw_halted); |
| break; |
| |
| case qib_sdma_state_s99_running: |
| __qib_sdma_process_event(ppd, qib_sdma_event_e7322_err_halted); |
| __qib_sdma_process_event(ppd, qib_sdma_event_e60_hw_halted); |
| break; |
| } |
| |
| spin_unlock_irqrestore(&ppd->sdma_lock, flags); |
| } |
| |
| /* |
| * handle per-device errors (not per-port errors) |
| */ |
| static noinline void handle_7322_errors(struct qib_devdata *dd) |
| { |
| char *msg; |
| u64 iserr = 0; |
| u64 errs; |
| u64 mask; |
| int log_idx; |
| |
| qib_stats.sps_errints++; |
| errs = qib_read_kreg64(dd, kr_errstatus); |
| if (!errs) { |
| qib_devinfo(dd->pcidev, "device error interrupt, " |
| "but no error bits set!\n"); |
| goto done; |
| } |
| |
| /* don't report errors that are masked */ |
| errs &= dd->cspec->errormask; |
| msg = dd->cspec->emsgbuf; |
| |
| /* do these first, they are most important */ |
| if (errs & QIB_E_HARDWARE) { |
| *msg = '\0'; |
| qib_7322_handle_hwerrors(dd, msg, sizeof dd->cspec->emsgbuf); |
| } else |
| for (log_idx = 0; log_idx < QIB_EEP_LOG_CNT; ++log_idx) |
| if (errs & dd->eep_st_masks[log_idx].errs_to_log) |
| qib_inc_eeprom_err(dd, log_idx, 1); |
| |
| if (errs & QIB_E_SPKTERRS) { |
| qib_disarm_7322_senderrbufs(dd->pport); |
| qib_stats.sps_txerrs++; |
| } else if (errs & QIB_E_INVALIDADDR) |
| qib_stats.sps_txerrs++; |
| else if (errs & QIB_E_ARMLAUNCH) { |
| qib_stats.sps_txerrs++; |
| qib_disarm_7322_senderrbufs(dd->pport); |
| } |
| qib_write_kreg(dd, kr_errclear, errs); |
| |
| /* |
| * The ones we mask off are handled specially below |
| * or above. Also mask SDMADISABLED by default as it |
| * is too chatty. |
| */ |
| mask = QIB_E_HARDWARE; |
| *msg = '\0'; |
| |
| err_decode(msg, sizeof dd->cspec->emsgbuf, errs & ~mask, |
| qib_7322error_msgs); |
| |
| /* |
| * Getting reset is a tragedy for all ports. Mark the device |
| * _and_ the ports as "offline" in way meaningful to each. |
| */ |
| if (errs & QIB_E_RESET) { |
| int pidx; |
| |
| qib_dev_err(dd, "Got reset, requires re-init " |
| "(unload and reload driver)\n"); |
| dd->flags &= ~QIB_INITTED; /* needs re-init */ |
| /* mark as having had error */ |
| *dd->devstatusp |= QIB_STATUS_HWERROR; |
| for (pidx = 0; pidx < dd->num_pports; ++pidx) |
| if (dd->pport[pidx].link_speed_supported) |
| *dd->pport[pidx].statusp &= ~QIB_STATUS_IB_CONF; |
| } |
| |
| if (*msg && iserr) |
| qib_dev_err(dd, "%s error\n", msg); |
| |
| /* |
| * If there were hdrq or egrfull errors, wake up any processes |
| * waiting in poll. We used to try to check which contexts had |
| * the overflow, but given the cost of that and the chip reads |
| * to support it, it's better to just wake everybody up if we |
| * get an overflow; waiters can poll again if it's not them. |
| */ |
| if (errs & (ERR_MASK(RcvEgrFullErr) | ERR_MASK(RcvHdrFullErr))) { |
| qib_handle_urcv(dd, ~0U); |
| if (errs & ERR_MASK(RcvEgrFullErr)) |
| qib_stats.sps_buffull++; |
| else |
| qib_stats.sps_hdrfull++; |
| } |
| |
| done: |
| return; |
| } |
| |
| static void qib_error_tasklet(unsigned long data) |
| { |
| struct qib_devdata *dd = (struct qib_devdata *)data; |
| |
| handle_7322_errors(dd); |
| qib_write_kreg(dd, kr_errmask, dd->cspec->errormask); |
| } |
| |
| static void reenable_chase(unsigned long opaque) |
| { |
| struct qib_pportdata *ppd = (struct qib_pportdata *)opaque; |
| |
| ppd->cpspec->chase_timer.expires = 0; |
| qib_set_ib_7322_lstate(ppd, QLOGIC_IB_IBCC_LINKCMD_DOWN, |
| QLOGIC_IB_IBCC_LINKINITCMD_POLL); |
| } |
| |
| static void disable_chase(struct qib_pportdata *ppd, u64 tnow, u8 ibclt) |
| { |
| ppd->cpspec->chase_end = 0; |
| |
| if (!qib_chase) |
| return; |
| |
| qib_set_ib_7322_lstate(ppd, QLOGIC_IB_IBCC_LINKCMD_DOWN, |
| QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); |
| ppd->cpspec->chase_timer.expires = jiffies + QIB_CHASE_DIS_TIME; |
| add_timer(&ppd->cpspec->chase_timer); |
| } |
| |
| static void handle_serdes_issues(struct qib_pportdata *ppd, u64 ibcst) |
| { |
| u8 ibclt; |
| u64 tnow; |
| |
| ibclt = (u8)SYM_FIELD(ibcst, IBCStatusA_0, LinkTrainingState); |
| |
| /* |
| * Detect and handle the state chase issue, where we can |
| * get stuck if we are unlucky on timing on both sides of |
| * the link. If we are, we disable, set a timer, and |
| * then re-enable. |
| */ |
| switch (ibclt) { |
| case IB_7322_LT_STATE_CFGRCVFCFG: |
| case IB_7322_LT_STATE_CFGWAITRMT: |
| case IB_7322_LT_STATE_TXREVLANES: |
| case IB_7322_LT_STATE_CFGENH: |
| tnow = get_jiffies_64(); |
| if (ppd->cpspec->chase_end && |
| time_after64(tnow, ppd->cpspec->chase_end)) |
| disable_chase(ppd, tnow, ibclt); |
| else if (!ppd->cpspec->chase_end) |
| ppd->cpspec->chase_end = tnow + QIB_CHASE_TIME; |
| break; |
| default: |
| ppd->cpspec->chase_end = 0; |
| break; |
| } |
| |
| if (((ibclt >= IB_7322_LT_STATE_CFGTEST && |
| ibclt <= IB_7322_LT_STATE_CFGWAITENH) || |
| ibclt == IB_7322_LT_STATE_LINKUP) && |
| (ibcst & SYM_MASK(IBCStatusA_0, LinkSpeedQDR))) { |
| force_h1(ppd); |
| ppd->cpspec->qdr_reforce = 1; |
| if (!ppd->dd->cspec->r1) |
| serdes_7322_los_enable(ppd, 0); |
| } else if (ppd->cpspec->qdr_reforce && |
| (ibcst & SYM_MASK(IBCStatusA_0, LinkSpeedQDR)) && |
| (ibclt == IB_7322_LT_STATE_CFGENH || |
| ibclt == IB_7322_LT_STATE_CFGIDLE || |
| ibclt == IB_7322_LT_STATE_LINKUP)) |
| force_h1(ppd); |
| |
| if ((IS_QMH(ppd->dd) || IS_QME(ppd->dd)) && |
| ppd->link_speed_enabled == QIB_IB_QDR && |
| (ibclt == IB_7322_LT_STATE_CFGTEST || |
| ibclt == IB_7322_LT_STATE_CFGENH || |
| (ibclt >= IB_7322_LT_STATE_POLLACTIVE && |
| ibclt <= IB_7322_LT_STATE_SLEEPQUIET))) |
| adj_tx_serdes(ppd); |
| |
| if (ibclt != IB_7322_LT_STATE_LINKUP) { |
| u8 ltstate = qib_7322_phys_portstate(ibcst); |
| u8 pibclt = (u8)SYM_FIELD(ppd->lastibcstat, IBCStatusA_0, |
| LinkTrainingState); |
| if (!ppd->dd->cspec->r1 && |
| pibclt == IB_7322_LT_STATE_LINKUP && |
| ltstate != IB_PHYSPORTSTATE_LINK_ERR_RECOVER && |
| ltstate != IB_PHYSPORTSTATE_RECOVERY_RETRAIN && |
| ltstate != IB_PHYSPORTSTATE_RECOVERY_WAITRMT && |
| ltstate != IB_PHYSPORTSTATE_RECOVERY_IDLE) |
| /* If the link went down (but no into recovery, |
| * turn LOS back on */ |
| serdes_7322_los_enable(ppd, 1); |
| if (!ppd->cpspec->qdr_dfe_on && |
| ibclt <= IB_7322_LT_STATE_SLEEPQUIET) { |
| ppd->cpspec->qdr_dfe_on = 1; |
| ppd->cpspec->qdr_dfe_time = 0; |
| /* On link down, reenable QDR adaptation */ |
| qib_write_kreg_port(ppd, krp_static_adapt_dis(2), |
| ppd->dd->cspec->r1 ? |
| QDR_STATIC_ADAPT_DOWN_R1 : |
| QDR_STATIC_ADAPT_DOWN); |
| printk(KERN_INFO QIB_DRV_NAME |
| " IB%u:%u re-enabled QDR adaptation " |
| "ibclt %x\n", ppd->dd->unit, ppd->port, ibclt); |
| } |
| } |
| } |
| |
| static int qib_7322_set_ib_cfg(struct qib_pportdata *, int, u32); |
| |
| /* |
| * This is per-pport error handling. |
| * will likely get it's own MSIx interrupt (one for each port, |
| * although just a single handler). |
| */ |
| static noinline void handle_7322_p_errors(struct qib_pportdata *ppd) |
| { |
| char *msg; |
| u64 ignore_this_time = 0, iserr = 0, errs, fmask; |
| struct qib_devdata *dd = ppd->dd; |
| |
| /* do this as soon as possible */ |
| fmask = qib_read_kreg64(dd, kr_act_fmask); |
| if (!fmask) |
| check_7322_rxe_status(ppd); |
| |
| errs = qib_read_kreg_port(ppd, krp_errstatus); |
| if (!errs) |
| qib_devinfo(dd->pcidev, |
| "Port%d error interrupt, but no error bits set!\n", |
| ppd->port); |
| if (!fmask) |
| errs &= ~QIB_E_P_IBSTATUSCHANGED; |
| if (!errs) |
| goto done; |
| |
| msg = ppd->cpspec->epmsgbuf; |
| *msg = '\0'; |
| |
| if (errs & ~QIB_E_P_BITSEXTANT) { |
| err_decode(msg, sizeof ppd->cpspec->epmsgbuf, |
| errs & ~QIB_E_P_BITSEXTANT, qib_7322p_error_msgs); |
| if (!*msg) |
| snprintf(msg, sizeof ppd->cpspec->epmsgbuf, |
| "no others"); |
| qib_dev_porterr(dd, ppd->port, "error interrupt with unknown" |
| " errors 0x%016Lx set (and %s)\n", |
| (errs & ~QIB_E_P_BITSEXTANT), msg); |
| *msg = '\0'; |
| } |
| |
| if (errs & QIB_E_P_SHDR) { |
| u64 symptom; |
| |
| /* determine cause, then write to clear */ |
| symptom = qib_read_kreg_port(ppd, krp_sendhdrsymptom); |
| qib_write_kreg_port(ppd, krp_sendhdrsymptom, 0); |
| err_decode(msg, sizeof ppd->cpspec->epmsgbuf, symptom, |
| hdrchk_msgs); |
| *msg = '\0'; |
| /* senderrbuf cleared in SPKTERRS below */ |
| } |
| |
| if (errs & QIB_E_P_SPKTERRS) { |
| if ((errs & QIB_E_P_LINK_PKTERRS) && |
| !(ppd->lflags & QIBL_LINKACTIVE)) { |
| /* |
| * This can happen when trying to bring the link |
| * up, but the IB link changes state at the "wrong" |
| * time. The IB logic then complains that the packet |
| * isn't valid. We don't want to confuse people, so |
| * we just don't print them, except at debug |
| */ |
| err_decode(msg, sizeof ppd->cpspec->epmsgbuf, |
| (errs & QIB_E_P_LINK_PKTERRS), |
| qib_7322p_error_msgs); |
| *msg = '\0'; |
| ignore_this_time = errs & QIB_E_P_LINK_PKTERRS; |
| } |
| qib_disarm_7322_senderrbufs(ppd); |
| } else if ((errs & QIB_E_P_LINK_PKTERRS) && |
| !(ppd->lflags & QIBL_LINKACTIVE)) { |
| /* |
| * This can happen when SMA is trying to bring the link |
| * up, but the IB link changes state at the "wrong" time. |
| * The IB logic then complains that the packet isn't |
| * valid. We don't want to confuse people, so we just |
| * don't print them, except at debug |
| */ |
| err_decode(msg, sizeof ppd->cpspec->epmsgbuf, errs, |
| qib_7322p_error_msgs); |
| ignore_this_time = errs & QIB_E_P_LINK_PKTERRS; |
| *msg = '\0'; |
| } |
| |
| qib_write_kreg_port(ppd, krp_errclear, errs); |
| |
| errs &= ~ignore_this_time; |
| if (!errs) |
| goto done; |
| |
| if (errs & QIB_E_P_RPKTERRS) |
| qib_stats.sps_rcverrs++; |
| if (errs & QIB_E_P_SPKTERRS) |
| qib_stats.sps_txerrs++; |
| |
| iserr = errs & ~(QIB_E_P_RPKTERRS | QIB_E_P_PKTERRS); |
| |
| if (errs & QIB_E_P_SDMAERRS) |
| sdma_7322_p_errors(ppd, errs); |
| |
| if (errs & QIB_E_P_IBSTATUSCHANGED) { |
| u64 ibcs; |
| u8 ltstate; |
| |
| ibcs = qib_read_kreg_port(ppd, krp_ibcstatus_a); |
| ltstate = qib_7322_phys_portstate(ibcs); |
| |
| if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) |
| handle_serdes_issues(ppd, ibcs); |
| if (!(ppd->cpspec->ibcctrl_a & |
| SYM_MASK(IBCCtrlA_0, IBStatIntReductionEn))) { |
| /* |
| * We got our interrupt, so init code should be |
| * happy and not try alternatives. Now squelch |
| * other "chatter" from link-negotiation (pre Init) |
| */ |
| ppd->cpspec->ibcctrl_a |= |
| SYM_MASK(IBCCtrlA_0, IBStatIntReductionEn); |
| qib_write_kreg_port(ppd, krp_ibcctrl_a, |
| ppd->cpspec->ibcctrl_a); |
| } |
| |
| /* Update our picture of width and speed from chip */ |
| ppd->link_width_active = |
| (ibcs & SYM_MASK(IBCStatusA_0, LinkWidthActive)) ? |
| IB_WIDTH_4X : IB_WIDTH_1X; |
| ppd->link_speed_active = (ibcs & SYM_MASK(IBCStatusA_0, |
| LinkSpeedQDR)) ? QIB_IB_QDR : (ibcs & |
| SYM_MASK(IBCStatusA_0, LinkSpeedActive)) ? |
| QIB_IB_DDR : QIB_IB_SDR; |
| |
| if ((ppd->lflags & QIBL_IB_LINK_DISABLED) && ltstate != |
| IB_PHYSPORTSTATE_DISABLED) |
| qib_set_ib_7322_lstate(ppd, 0, |
| QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); |
| else |
| /* |
| * Since going into a recovery state causes the link |
| * state to go down and since recovery is transitory, |
| * it is better if we "miss" ever seeing the link |
| * training state go into recovery (i.e., ignore this |
| * transition for link state special handling purposes) |
| * without updating lastibcstat. |
| */ |
| if (ltstate != IB_PHYSPORTSTATE_LINK_ERR_RECOVER && |
| ltstate != IB_PHYSPORTSTATE_RECOVERY_RETRAIN && |
| ltstate != IB_PHYSPORTSTATE_RECOVERY_WAITRMT && |
| ltstate != IB_PHYSPORTSTATE_RECOVERY_IDLE) |
| qib_handle_e_ibstatuschanged(ppd, ibcs); |
| } |
| if (*msg && iserr) |
| qib_dev_porterr(dd, ppd->port, "%s error\n", msg); |
| |
| if (ppd->state_wanted & ppd->lflags) |
| wake_up_interruptible(&ppd->state_wait); |
| done: |
| return; |
| } |
| |
| /* enable/disable chip from delivering interrupts */ |
| static void qib_7322_set_intr_state(struct qib_devdata *dd, u32 enable) |
| { |
| if (enable) { |
| if (dd->flags & QIB_BADINTR) |
| return; |
| qib_write_kreg(dd, kr_intmask, dd->cspec->int_enable_mask); |
| /* cause any pending enabled interrupts to be re-delivered */ |
| qib_write_kreg(dd, kr_intclear, 0ULL); |
| if (dd->cspec->num_msix_entries) { |
| /* and same for MSIx */ |
| u64 val = qib_read_kreg64(dd, kr_intgranted); |
| if (val) |
| qib_write_kreg(dd, kr_intgranted, val); |
| } |
| } else |
| qib_write_kreg(dd, kr_intmask, 0ULL); |
| } |
| |
| /* |
| * Try to cleanup as much as possible for anything that might have gone |
| * wrong while in freeze mode, such as pio buffers being written by user |
| * processes (causing armlaunch), send errors due to going into freeze mode, |
| * etc., and try to avoid causing extra interrupts while doing so. |
| * Forcibly update the in-memory pioavail register copies after cleanup |
| * because the chip won't do it while in freeze mode (the register values |
| * themselves are kept correct). |
| * Make sure that we don't lose any important interrupts by using the chip |
| * feature that says that writing 0 to a bit in *clear that is set in |
| * *status will cause an interrupt to be generated again (if allowed by |
| * the *mask value). |
| * This is in chip-specific code because of all of the register accesses, |
| * even though the details are similar on most chips. |
| */ |
| static void qib_7322_clear_freeze(struct qib_devdata *dd) |
| { |
| int pidx; |
| |
| /* disable error interrupts, to avoid confusion */ |
| qib_write_kreg(dd, kr_errmask, 0ULL); |
| |
| for (pidx = 0; pidx < dd->num_pports; ++pidx) |
| if (dd->pport[pidx].link_speed_supported) |
| qib_write_kreg_port(dd->pport + pidx, krp_errmask, |
| 0ULL); |
| |
| /* also disable interrupts; errormask is sometimes overwriten */ |
| qib_7322_set_intr_state(dd, 0); |
| |
| /* clear the freeze, and be sure chip saw it */ |
| qib_write_kreg(dd, kr_control, dd->control); |
| qib_read_kreg32(dd, kr_scratch); |
| |
| /* |
| * Force new interrupt if any hwerr, error or interrupt bits are |
| * still set, and clear "safe" send packet errors related to freeze |
| * and cancelling sends. Re-enable error interrupts before possible |
| * force of re-interrupt on pending interrupts. |
| */ |
| qib_write_kreg(dd, kr_hwerrclear, 0ULL); |
| qib_write_kreg(dd, kr_errclear, E_SPKT_ERRS_IGNORE); |
| qib_write_kreg(dd, kr_errmask, dd->cspec->errormask); |
| /* We need to purge per-port errs and reset mask, too */ |
| for (pidx = 0; pidx < dd->num_pports; ++pidx) { |
| if (!dd->pport[pidx].link_speed_supported) |
| continue; |
| qib_write_kreg_port(dd->pport + pidx, krp_errclear, ~0Ull); |
| qib_write_kreg_port(dd->pport + pidx, krp_errmask, ~0Ull); |
| } |
| qib_7322_set_intr_state(dd, 1); |
| } |
| |
| /* no error handling to speak of */ |
| /** |
| * qib_7322_handle_hwerrors - display hardware errors. |
| * @dd: the qlogic_ib device |
| * @msg: the output buffer |
| * @msgl: the size of the output buffer |
| * |
| * Use same msg buffer as regular errors to avoid excessive stack |
| * use. Most hardware errors are catastrophic, but for right now, |
| * we'll print them and continue. We reuse the same message buffer as |
| * qib_handle_errors() to avoid excessive stack usage. |
| */ |
| static void qib_7322_handle_hwerrors(struct qib_devdata *dd, char *msg, |
| size_t msgl) |
| { |
| u64 hwerrs; |
| u32 ctrl; |
| int isfatal = 0; |
| |
| hwerrs = qib_read_kreg64(dd, kr_hwerrstatus); |
| if (!hwerrs) |
| goto bail; |
| if (hwerrs == ~0ULL) { |
| qib_dev_err(dd, "Read of hardware error status failed " |
| "(all bits set); ignoring\n"); |
| goto bail; |
| } |
| qib_stats.sps_hwerrs++; |
| |
| /* Always clear the error status register, except BIST fail */ |
| qib_write_kreg(dd, kr_hwerrclear, hwerrs & |
| ~HWE_MASK(PowerOnBISTFailed)); |
| |
| hwerrs &= dd->cspec->hwerrmask; |
| |
| /* no EEPROM logging, yet */ |
| |
| if (hwerrs) |
| qib_devinfo(dd->pcidev, "Hardware error: hwerr=0x%llx " |
| "(cleared)\n", (unsigned long long) hwerrs); |
| |
| ctrl = qib_read_kreg32(dd, kr_control); |
| if ((ctrl & SYM_MASK(Control, FreezeMode)) && !dd->diag_client) { |
| /* |
| * No recovery yet... |
| */ |
| if ((hwerrs & ~HWE_MASK(LATriggered)) || |
| dd->cspec->stay_in_freeze) { |
| /* |
| * If any set that we aren't ignoring only make the |
| * complaint once, in case it's stuck or recurring, |
| * and we get here multiple times |
| * Force link down, so switch knows, and |
| * LEDs are turned off. |
| */ |
| if (dd->flags & QIB_INITTED) |
| isfatal = 1; |
| } else |
| qib_7322_clear_freeze(dd); |
| } |
| |
| if (hwerrs & HWE_MASK(PowerOnBISTFailed)) { |
| isfatal = 1; |
| strlcpy(msg, "[Memory BIST test failed, " |
| "InfiniPath hardware unusable]", msgl); |
| /* ignore from now on, so disable until driver reloaded */ |
| dd->cspec->hwerrmask &= ~HWE_MASK(PowerOnBISTFailed); |
| qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask); |
| } |
| |
| err_decode(msg, msgl, hwerrs, qib_7322_hwerror_msgs); |
| |
| /* Ignore esoteric PLL failures et al. */ |
| |
| qib_dev_err(dd, "%s hardware error\n", msg); |
| |
| if (isfatal && !dd->diag_client) { |
| qib_dev_err(dd, "Fatal Hardware Error, no longer" |
| " usable, SN %.16s\n", dd->serial); |
| /* |
| * for /sys status file and user programs to print; if no |
| * trailing brace is copied, we'll know it was truncated. |
| */ |
| if (dd->freezemsg) |
| snprintf(dd->freezemsg, dd->freezelen, |
| "{%s}", msg); |
| qib_disable_after_error(dd); |
| } |
| bail:; |
| } |
| |
| /** |
| * qib_7322_init_hwerrors - enable hardware errors |
| * @dd: the qlogic_ib device |
| * |
| * now that we have finished initializing everything that might reasonably |
| * cause a hardware error, and cleared those errors bits as they occur, |
| * we can enable hardware errors in the mask (potentially enabling |
| * freeze mode), and enable hardware errors as errors (along with |
| * everything else) in errormask |
| */ |
| static void qib_7322_init_hwerrors(struct qib_devdata *dd) |
| { |
| int pidx; |
| u64 extsval; |
| |
| extsval = qib_read_kreg64(dd, kr_extstatus); |
| if (!(extsval & (QIB_EXTS_MEMBIST_DISABLED | |
| QIB_EXTS_MEMBIST_ENDTEST))) |
| qib_dev_err(dd, "MemBIST did not complete!\n"); |
| |
| /* never clear BIST failure, so reported on each driver load */ |
| qib_write_kreg(dd, kr_hwerrclear, ~HWE_MASK(PowerOnBISTFailed)); |
| qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask); |
| |
| /* clear all */ |
| qib_write_kreg(dd, kr_errclear, ~0ULL); |
| /* enable errors that are masked, at least this first time. */ |
| qib_write_kreg(dd, kr_errmask, ~0ULL); |
| dd->cspec->errormask = qib_read_kreg64(dd, kr_errmask); |
| for (pidx = 0; pidx < dd->num_pports; ++pidx) |
| if (dd->pport[pidx].link_speed_supported) |
| qib_write_kreg_port(dd->pport + pidx, krp_errmask, |
| ~0ULL); |
| } |
| |
| /* |
| * Disable and enable the armlaunch error. Used for PIO bandwidth testing |
| * on chips that are count-based, rather than trigger-based. There is no |
| * reference counting, but that's also fine, given the intended use. |
| * Only chip-specific because it's all register accesses |
| */ |
| static void qib_set_7322_armlaunch(struct qib_devdata *dd, u32 enable) |
| { |
| if (enable) { |
| qib_write_kreg(dd, kr_errclear, QIB_E_SPIOARMLAUNCH); |
| dd->cspec->errormask |= QIB_E_SPIOARMLAUNCH; |
| } else |
| dd->cspec->errormask &= ~QIB_E_SPIOARMLAUNCH; |
| qib_write_kreg(dd, kr_errmask, dd->cspec->errormask); |
| } |
| |
| /* |
| * Formerly took parameter <which> in pre-shifted, |
| * pre-merged form with LinkCmd and LinkInitCmd |
| * together, and assuming the zero was NOP. |
| */ |
| static void qib_set_ib_7322_lstate(struct qib_pportdata *ppd, u16 linkcmd, |
| u16 linitcmd) |
| { |
| u64 mod_wd; |
| struct qib_devdata *dd = ppd->dd; |
| unsigned long flags; |
| |
| if (linitcmd == QLOGIC_IB_IBCC_LINKINITCMD_DISABLE) { |
| /* |
| * If we are told to disable, note that so link-recovery |
| * code does not attempt to bring us back up. |
| * Also reset everything that we can, so we start |
| * completely clean when re-enabled (before we |
| * actually issue the disable to the IBC) |
| */ |
| qib_7322_mini_pcs_reset(ppd); |
| spin_lock_irqsave(&ppd->lflags_lock, flags); |
| ppd->lflags |= QIBL_IB_LINK_DISABLED; |
| spin_unlock_irqrestore(&ppd->lflags_lock, flags); |
| } else if (linitcmd || linkcmd == QLOGIC_IB_IBCC_LINKCMD_DOWN) { |
| /* |
| * Any other linkinitcmd will lead to LINKDOWN and then |
| * to INIT (if all is well), so clear flag to let |
| * link-recovery code attempt to bring us back up. |
| */ |
| spin_lock_irqsave(&ppd->lflags_lock, flags); |
| ppd->lflags &= ~QIBL_IB_LINK_DISABLED; |
| spin_unlock_irqrestore(&ppd->lflags_lock, flags); |
| /* |
| * Clear status change interrupt reduction so the |
| * new state is seen. |
| */ |
| ppd->cpspec->ibcctrl_a &= |
| ~SYM_MASK(IBCCtrlA_0, IBStatIntReductionEn); |
| } |
| |
| mod_wd = (linkcmd << IBA7322_IBCC_LINKCMD_SHIFT) | |
| (linitcmd << QLOGIC_IB_IBCC_LINKINITCMD_SHIFT); |
| |
| qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a | |
| mod_wd); |
| /* write to chip to prevent back-to-back writes of ibc reg */ |
| qib_write_kreg(dd, kr_scratch, 0); |
| |
| } |
| |
| /* |
| * The total RCV buffer memory is 64KB, used for both ports, and is |
| * in units of 64 bytes (same as IB flow control credit unit). |
| * The consumedVL unit in the same registers are in 32 byte units! |
| * So, a VL15 packet needs 4.50 IB credits, and 9 rx buffer chunks, |
| * and we can therefore allocate just 9 IB credits for 2 VL15 packets |
| * in krp_rxcreditvl15, rather than 10. |
| */ |
| #define RCV_BUF_UNITSZ 64 |
| #define NUM_RCV_BUF_UNITS(dd) ((64 * 1024) / (RCV_BUF_UNITSZ * dd->num_pports)) |
| |
| static void set_vls(struct qib_pportdata *ppd) |
| { |
| int i, numvls, totcred, cred_vl, vl0extra; |
| struct qib_devdata *dd = ppd->dd; |
| u64 val; |
| |
| numvls = qib_num_vls(ppd->vls_operational); |
| |
| /* |
| * Set up per-VL credits. Below is kluge based on these assumptions: |
| * 1) port is disabled at the time early_init is called. |
| * 2) give VL15 17 credits, for two max-plausible packets. |
| * 3) Give VL0-N the rest, with any rounding excess used for VL0 |
| */ |
| /* 2 VL15 packets @ 288 bytes each (including IB headers) */ |
| totcred = NUM_RCV_BUF_UNITS(dd); |
| cred_vl = (2 * 288 + RCV_BUF_UNITSZ - 1) / RCV_BUF_UNITSZ; |
| totcred -= cred_vl; |
| qib_write_kreg_port(ppd, krp_rxcreditvl15, (u64) cred_vl); |
| cred_vl = totcred / numvls; |
| vl0extra = totcred - cred_vl * numvls; |
| qib_write_kreg_port(ppd, krp_rxcreditvl0, cred_vl + vl0extra); |
| for (i = 1; i < numvls; i++) |
| qib_write_kreg_port(ppd, krp_rxcreditvl0 + i, cred_vl); |
| for (; i < 8; i++) /* no buffer space for other VLs */ |
| qib_write_kreg_port(ppd, krp_rxcreditvl0 + i, 0); |
| |
| /* Notify IBC that credits need to be recalculated */ |
| val = qib_read_kreg_port(ppd, krp_ibsdtestiftx); |
| val |= SYM_MASK(IB_SDTEST_IF_TX_0, CREDIT_CHANGE); |
| qib_write_kreg_port(ppd, krp_ibsdtestiftx, val); |
| qib_write_kreg(dd, kr_scratch, 0ULL); |
| val &= ~SYM_MASK(IB_SDTEST_IF_TX_0, CREDIT_CHANGE); |
| qib_write_kreg_port(ppd, krp_ibsdtestiftx, val); |
| |
| for (i = 0; i < numvls; i++) |
| val = qib_read_kreg_port(ppd, krp_rxcreditvl0 + i); |
| val = qib_read_kreg_port(ppd, krp_rxcreditvl15); |
| |
| /* Change the number of operational VLs */ |
| ppd->cpspec->ibcctrl_a = (ppd->cpspec->ibcctrl_a & |
| ~SYM_MASK(IBCCtrlA_0, NumVLane)) | |
| ((u64)(numvls - 1) << SYM_LSB(IBCCtrlA_0, NumVLane)); |
| qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a); |
| qib_write_kreg(dd, kr_scratch, 0ULL); |
| } |
| |
| /* |
| * The code that deals with actual SerDes is in serdes_7322_init(). |
| * Compared to the code for iba7220, it is minimal. |
| */ |
| static int serdes_7322_init(struct qib_pportdata *ppd); |
| |
| /** |
| * qib_7322_bringup_serdes - bring up the serdes |
| * @ppd: physical port on the qlogic_ib device |
| */ |
| static int qib_7322_bringup_serdes(struct qib_pportdata *ppd) |
| { |
| struct qib_devdata *dd = ppd->dd; |
| u64 val, guid, ibc; |
| unsigned long flags; |
| int ret = 0; |
| |
| /* |
| * SerDes model not in Pd, but still need to |
| * set up much of IBCCtrl and IBCDDRCtrl; move elsewhere |
| * eventually. |
| */ |
| /* Put IBC in reset, sends disabled (should be in reset already) */ |
| ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, IBLinkEn); |
| qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a); |
| qib_write_kreg(dd, kr_scratch, 0ULL); |
| |
| if (qib_compat_ddr_negotiate) { |
| ppd->cpspec->ibdeltainprog = 1; |
| ppd->cpspec->ibsymsnap = read_7322_creg32_port(ppd, |
| crp_ibsymbolerr); |
| ppd->cpspec->iblnkerrsnap = read_7322_creg32_port(ppd, |
| crp_iblinkerrrecov); |
| } |
| |
| /* flowcontrolwatermark is in units of KBytes */ |
| ibc = 0x5ULL << SYM_LSB(IBCCtrlA_0, FlowCtrlWaterMark); |
| /* |
| * Flow control is sent this often, even if no changes in |
| * buffer space occur. Units are 128ns for this chip. |
| * Set to 3usec. |
| */ |
| ibc |= 24ULL << SYM_LSB(IBCCtrlA_0, FlowCtrlPeriod); |
| /* max error tolerance */ |
| ibc |= 0xfULL << SYM_LSB(IBCCtrlA_0, PhyerrThreshold); |
| /* IB credit flow control. */ |
| ibc |= 0xfULL << SYM_LSB(IBCCtrlA_0, OverrunThreshold); |
| /* |
| * set initial max size pkt IBC will send, including ICRC; it's the |
| * PIO buffer size in dwords, less 1; also see qib_set_mtu() |
| */ |
| ibc |= ((u64)(ppd->ibmaxlen >> 2) + 1) << |
| SYM_LSB(IBCCtrlA_0, MaxPktLen); |
| ppd->cpspec->ibcctrl_a = ibc; /* without linkcmd or linkinitcmd! */ |
| |
| /* |
| * Reset the PCS interface to the serdes (and also ibc, which is still |
| * in reset from above). Writes new value of ibcctrl_a as last step. |
| */ |
| qib_7322_mini_pcs_reset(ppd); |
| |
| if (!ppd->cpspec->ibcctrl_b) { |
| unsigned lse = ppd->link_speed_enabled; |
| |
| /* |
| * Not on re-init after reset, establish shadow |
| * and force initial config. |
| */ |
| ppd->cpspec->ibcctrl_b = qib_read_kreg_port(ppd, |
| krp_ibcctrl_b); |
| ppd->cpspec->ibcctrl_b &= ~(IBA7322_IBC_SPEED_QDR | |
| IBA7322_IBC_SPEED_DDR | |
| IBA7322_IBC_SPEED_SDR | |
| IBA7322_IBC_WIDTH_AUTONEG | |
| SYM_MASK(IBCCtrlB_0, IB_LANE_REV_SUPPORTED)); |
| if (lse & (lse - 1)) /* Muliple speeds enabled */ |
| ppd->cpspec->ibcctrl_b |= |
| (lse << IBA7322_IBC_SPEED_LSB) | |
| IBA7322_IBC_IBTA_1_2_MASK | |
| IBA7322_IBC_MAX_SPEED_MASK; |
| else |
| ppd->cpspec->ibcctrl_b |= (lse == QIB_IB_QDR) ? |
| IBA7322_IBC_SPEED_QDR | |
| IBA7322_IBC_IBTA_1_2_MASK : |
| (lse == QIB_IB_DDR) ? |
| IBA7322_IBC_SPEED_DDR : |
| IBA7322_IBC_SPEED_SDR; |
| if ((ppd->link_width_enabled & (IB_WIDTH_1X | IB_WIDTH_4X)) == |
| (IB_WIDTH_1X | IB_WIDTH_4X)) |
| ppd->cpspec->ibcctrl_b |= IBA7322_IBC_WIDTH_AUTONEG; |
| else |
| ppd->cpspec->ibcctrl_b |= |
| ppd->link_width_enabled == IB_WIDTH_4X ? |
| IBA7322_IBC_WIDTH_4X_ONLY : |
| IBA7322_IBC_WIDTH_1X_ONLY; |
| |
| /* always enable these on driver reload, not sticky */ |
| ppd->cpspec->ibcctrl_b |= (IBA7322_IBC_RXPOL_MASK | |
| IBA7322_IBC_HRTBT_MASK); |
| } |
| qib_write_kreg_port(ppd, krp_ibcctrl_b, ppd->cpspec->ibcctrl_b); |
| |
| /* setup so we have more time at CFGTEST to change H1 */ |
| val = qib_read_kreg_port(ppd, krp_ibcctrl_c); |
| val &= ~SYM_MASK(IBCCtrlC_0, IB_FRONT_PORCH); |
| val |= 0xfULL << SYM_LSB(IBCCtrlC_0, IB_FRONT_PORCH); |
| qib_write_kreg_port(ppd, krp_ibcctrl_c, val); |
| |
| serdes_7322_init(ppd); |
| |
| guid = be64_to_cpu(ppd->guid); |
| if (!guid) { |
| if (dd->base_guid) |
| guid = be64_to_cpu(dd->base_guid) + ppd->port - 1; |
| ppd->guid = cpu_to_be64(guid); |
| } |
| |
| qib_write_kreg_port(ppd, krp_hrtbt_guid, guid); |
| /* write to chip to prevent back-to-back writes of ibc reg */ |
| qib_write_kreg(dd, kr_scratch, 0); |
| |
| /* Enable port */ |
| ppd->cpspec->ibcctrl_a |= SYM_MASK(IBCCtrlA_0, IBLinkEn); |
| set_vls(ppd); |
| |
| /* initially come up DISABLED, without sending anything. */ |
| val = ppd->cpspec->ibcctrl_a | (QLOGIC_IB_IBCC_LINKINITCMD_DISABLE << |
| QLOGIC_IB_IBCC_LINKINITCMD_SHIFT); |
| qib_write_kreg_port(ppd, krp_ibcctrl_a, val); |
| qib_write_kreg(dd, kr_scratch, 0ULL); |
| /* clear the linkinit cmds */ |
| ppd->cpspec->ibcctrl_a = val & ~SYM_MASK(IBCCtrlA_0, LinkInitCmd); |
| |
| /* be paranoid against later code motion, etc. */ |
| spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags); |
| ppd->p_rcvctrl |= SYM_MASK(RcvCtrl_0, RcvIBPortEnable); |
| qib_write_kreg_port(ppd, krp_rcvctrl, ppd->p_rcvctrl); |
| spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags); |
| |
| /* Also enable IBSTATUSCHG interrupt. */ |
| val = qib_read_kreg_port(ppd, krp_errmask); |
| qib_write_kreg_port(ppd, krp_errmask, |
| val | ERR_MASK_N(IBStatusChanged)); |
| |
| /* Always zero until we start messing with SerDes for real */ |
| return ret; |
| } |
| |
| /** |
| * qib_7322_quiet_serdes - set serdes to txidle |
| * @dd: the qlogic_ib device |
| * Called when driver is being unloaded |
| */ |
| static void qib_7322_mini_quiet_serdes(struct qib_pportdata *ppd) |
| { |
| u64 val; |
| unsigned long flags; |
| |
| qib_set_ib_7322_lstate(ppd, 0, QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); |
| |
| spin_lock_irqsave(&ppd->lflags_lock, flags); |
| ppd->lflags &= ~QIBL_IB_AUTONEG_INPROG; |
| spin_unlock_irqrestore(&ppd->lflags_lock, flags); |
| wake_up(&ppd->cpspec->autoneg_wait); |
| cancel_delayed_work_sync(&ppd->cpspec->autoneg_work); |
| if (ppd->dd->cspec->r1) |
| cancel_delayed_work_sync(&ppd->cpspec->ipg_work); |
| |
| ppd->cpspec->chase_end = 0; |
| if (ppd->cpspec->chase_timer.data) /* if initted */ |
| del_timer_sync(&ppd->cpspec->chase_timer); |
| |
| /* |
| * Despite the name, actually disables IBC as well. Do it when |
| * we are as sure as possible that no more packets can be |
| * received, following the down and the PCS reset. |
| * The actual disabling happens in qib_7322_mini_pci_reset(), |
| * along with the PCS being reset. |
| */ |
| ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, IBLinkEn); |
| qib_7322_mini_pcs_reset(ppd); |
| |
| /* |
| * Update the adjusted counters so the adjustment persists |
| * across driver reload. |
| */ |
| if (ppd->cpspec->ibsymdelta || ppd->cpspec->iblnkerrdelta || |
| ppd->cpspec->ibdeltainprog || ppd->cpspec->iblnkdowndelta) { |
| struct qib_devdata *dd = ppd->dd; |
| u64 diagc; |
| |
| /* enable counter writes */ |
| diagc = qib_read_kreg64(dd, kr_hwdiagctrl); |
| qib_write_kreg(dd, kr_hwdiagctrl, |
| diagc | SYM_MASK(HwDiagCtrl, CounterWrEnable)); |
| |
| if (ppd->cpspec->ibsymdelta || ppd->cpspec->ibdeltainprog) { |
| val = read_7322_creg32_port(ppd, crp_ibsymbolerr); |
| if (ppd->cpspec->ibdeltainprog) |
| val -= val - ppd->cpspec->ibsymsnap; |
| val -= ppd->cpspec->ibsymdelta; |
| write_7322_creg_port(ppd, crp_ibsymbolerr, val); |
| } |
| if (ppd->cpspec->iblnkerrdelta || ppd->cpspec->ibdeltainprog) { |
| val = read_7322_creg32_port(ppd, crp_iblinkerrrecov); |
| if (ppd->cpspec->ibdeltainprog) |
| val -= val - ppd->cpspec->iblnkerrsnap; |
| val -= ppd->cpspec->iblnkerrdelta; |
| write_7322_creg_port(ppd, crp_iblinkerrrecov, val); |
| } |
| if (ppd->cpspec->iblnkdowndelta) { |
| val = read_7322_creg32_port(ppd, crp_iblinkdown); |
| val += ppd->cpspec->iblnkdowndelta; |
| write_7322_creg_port(ppd, crp_iblinkdown, val); |
| } |
| /* |
| * No need to save ibmalfdelta since IB perfcounters |
| * are cleared on driver reload. |
| */ |
| |
| /* and disable counter writes */ |
| qib_write_kreg(dd, kr_hwdiagctrl, diagc); |
| } |
| } |
| |
| /** |
| * qib_setup_7322_setextled - set the state of the two external LEDs |
| * @ppd: physical port on the qlogic_ib device |
| * @on: whether the link is up or not |
| * |
| * The exact combo of LEDs if on is true is determined by looking |
| * at the ibcstatus. |
| * |
| * These LEDs indicate the physical and logical state of IB link. |
| * For this chip (at least with recommended board pinouts), LED1 |
| * is Yellow (logical state) and LED2 is Green (physical state), |
| * |
| * Note: We try to match the Mellanox HCA LED behavior as best |
| * we can. Green indicates physical link state is OK (something is |
| * plugged in, and we can train). |
| * Amber indicates the link is logically up (ACTIVE). |
| * Mellanox further blinks the amber LED to indicate data packet |
| * activity, but we have no hardware support for that, so it would |
| * require waking up every 10-20 msecs and checking the counters |
| * on the chip, and then turning the LED off if appropriate. That's |
| * visible overhead, so not something we will do. |
| */ |
| static void qib_setup_7322_setextled(struct qib_pportdata *ppd, u32 on) |
| { |
| struct qib_devdata *dd = ppd->dd; |
| u64 extctl, ledblink = 0, val; |
| unsigned long flags; |
| int yel, grn; |
| |
| /* |
| * The diags use the LED to indicate diag info, so we leave |
| * the external LED alone when the diags are running. |
| */ |
| if (dd->diag_client) |
| return; |
| |
| /* Allow override of LED display for, e.g. Locating system in rack */ |
| if (ppd->led_override) { |
| grn = (ppd->led_override & QIB_LED_PHYS); |
| yel = (ppd->led_override & QIB_LED_LOG); |
| } else if (on) { |
| val = qib_read_kreg_port(ppd, krp_ibcstatus_a); |
| grn = qib_7322_phys_portstate(val) == |
| IB_PHYSPORTSTATE_LINKUP; |
| yel = qib_7322_iblink_state(val) == IB_PORT_ACTIVE; |
| } else { |
| grn = 0; |
| yel = 0; |
| } |
| |
| spin_lock_irqsave(&dd->cspec->gpio_lock, flags); |
| extctl = dd->cspec->extctrl & (ppd->port == 1 ? |
| ~ExtLED_IB1_MASK : ~ExtLED_IB2_MASK); |
| if (grn) { |
| extctl |= ppd->port == 1 ? ExtLED_IB1_GRN : ExtLED_IB2_GRN; |
| /* |
| * Counts are in chip clock (4ns) periods. |
| * This is 1/16 sec (66.6ms) on, |
| * 3/16 sec (187.5 ms) off, with packets rcvd. |
| */ |
| ledblink = ((66600 * 1000UL / 4) << IBA7322_LEDBLINK_ON_SHIFT) | |
| ((187500 * 1000UL / 4) << IBA7322_LEDBLINK_OFF_SHIFT); |
| } |
| if (yel) |
| extctl |= ppd->port == 1 ? ExtLED_IB1_YEL : ExtLED_IB2_YEL; |
| dd->cspec->extctrl = extctl; |
| qib_write_kreg(dd, kr_extctrl, dd->cspec->extctrl); |
| spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags); |
| |
| if (ledblink) /* blink the LED on packet receive */ |
| qib_write_kreg_port(ppd, krp_rcvpktledcnt, ledblink); |
| } |
| |
| /* |
| * Disable MSIx interrupt if enabled, call generic MSIx code |
| * to cleanup, and clear pending MSIx interrupts. |
| * Used for fallback to INTx, after reset, and when MSIx setup fails. |
| */ |
| static void qib_7322_nomsix(struct qib_devdata *dd) |
| { |
| u64 intgranted; |
| int n; |
| |
| dd->cspec->main_int_mask = ~0ULL; |
| n = dd->cspec->num_msix_entries; |
| if (n) { |
| int i; |
| |
| dd->cspec->num_msix_entries = 0; |
| for (i = 0; i < n; i++) |
| free_irq(dd->cspec->msix_entries[i].vector, |
| dd->cspec->msix_arg[i]); |
| qib_nomsix(dd); |
| } |
| /* make sure no MSIx interrupts are left pending */ |
| intgranted = qib_read_kreg64(dd, kr_intgranted); |
| if (intgranted) |
| qib_write_kreg(dd, kr_intgranted, intgranted); |
| } |
| |
| static void qib_7322_free_irq(struct qib_devdata *dd) |
| { |
| if (dd->cspec->irq) { |
| free_irq(dd->cspec->irq, dd); |
| dd->cspec->irq = 0; |
| } |
| qib_7322_nomsix(dd); |
| } |
| |
| static void qib_setup_7322_cleanup(struct qib_devdata *dd) |
| { |
| int i; |
| |
| qib_7322_free_irq(dd); |
| kfree(dd->cspec->cntrs); |
| kfree(dd->cspec->sendchkenable); |
| kfree(dd->cspec->sendgrhchk); |
| kfree(dd->cspec->sendibchk); |
| kfree(dd->cspec->msix_entries); |
| kfree(dd->cspec->msix_arg); |
| for (i = 0; i < dd->num_pports; i++) { |
| unsigned long flags; |
| u32 mask = QSFP_GPIO_MOD_PRS_N | |
| (QSFP_GPIO_MOD_PRS_N << QSFP_GPIO_PORT2_SHIFT); |
| |
| kfree(dd->pport[i].cpspec->portcntrs); |
| if (dd->flags & QIB_HAS_QSFP) { |
| spin_lock_irqsave(&dd->cspec->gpio_lock, flags); |
| dd->cspec->gpio_mask &= ~mask; |
| qib_write_kreg(dd, kr_gpio_mask, dd->cspec->gpio_mask); |
| spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags); |
| qib_qsfp_deinit(&dd->pport[i].cpspec->qsfp_data); |
| } |
| if (dd->pport[i].ibport_data.smi_ah) |
| ib_destroy_ah(&dd->pport[i].ibport_data.smi_ah->ibah); |
| } |
| } |
| |
| /* handle SDMA interrupts */ |
| static void sdma_7322_intr(struct qib_devdata *dd, u64 istat) |
| { |
| struct qib_pportdata *ppd0 = &dd->pport[0]; |
| struct qib_pportdata *ppd1 = &dd->pport[1]; |
| u64 intr0 = istat & (INT_MASK_P(SDma, 0) | |
| INT_MASK_P(SDmaIdle, 0) | INT_MASK_P(SDmaProgress, 0)); |
| u64 intr1 = istat & (INT_MASK_P(SDma, 1) | |
| INT_MASK_P(SDmaIdle, 1) | INT_MASK_P(SDmaProgress, 1)); |
| |
| if (intr0) |
| qib_sdma_intr(ppd0); |
| if (intr1) |
| qib_sdma_intr(ppd1); |
| |
| if (istat & INT_MASK_PM(SDmaCleanupDone, 0)) |
| qib_sdma_process_event(ppd0, qib_sdma_event_e20_hw_started); |
| if (istat & INT_MASK_PM(SDmaCleanupDone, 1)) |
| qib_sdma_process_event(ppd1, qib_sdma_event_e20_hw_started); |
| } |
| |
| /* |
| * Set or clear the Send buffer available interrupt enable bit. |
| */ |
| static void qib_wantpiobuf_7322_intr(struct qib_devdata *dd, u32 needint) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&dd->sendctrl_lock, flags); |
| if (needint) |
| dd->sendctrl |= SYM_MASK(SendCtrl, SendIntBufAvail); |
| else |
| dd->sendctrl &= ~SYM_MASK(SendCtrl, SendIntBufAvail); |
| qib_write_kreg(dd, kr_sendctrl, dd->sendctrl); |
| qib_write_kreg(dd, kr_scratch, 0ULL); |
| spin_unlock_irqrestore(&dd->sendctrl_lock, flags); |
| } |
| |
| /* |
| * Somehow got an interrupt with reserved bits set in interrupt status. |
| * Print a message so we know it happened, then clear them. |
| * keep mainline interrupt handler cache-friendly |
| */ |
| static noinline void unknown_7322_ibits(struct qib_devdata *dd, u64 istat) |
| { |
| u64 kills; |
| char msg[128]; |
| |
| kills = istat & ~QIB_I_BITSEXTANT; |
| qib_dev_err(dd, "Clearing reserved interrupt(s) 0x%016llx:" |
| " %s\n", (unsigned long long) kills, msg); |
| qib_write_kreg(dd, kr_intmask, (dd->cspec->int_enable_mask & ~kills)); |
| } |
| |
| /* keep mainline interrupt handler cache-friendly */ |
| static noinline void unknown_7322_gpio_intr(struct qib_devdata *dd) |
| { |
| u32 gpiostatus; |
| int handled = 0; |
| int pidx; |
| |
| /* |
| * Boards for this chip currently don't use GPIO interrupts, |
| * so clear by writing GPIOstatus to GPIOclear, and complain |
| * to developer. To avoid endless repeats, clear |
| * the bits in the mask, since there is some kind of |
| * programming error or chip problem. |
| */ |
| gpiostatus = qib_read_kreg32(dd, kr_gpio_status); |
| /* |
| * In theory, writing GPIOstatus to GPIOclear could |
| * have a bad side-effect on some diagnostic that wanted |
| * to poll for a status-change, but the various shadows |
| * make that problematic at best. Diags will just suppress |
| * all GPIO interrupts during such tests. |
| */ |
| qib_write_kreg(dd, kr_gpio_clear, gpiostatus); |
| /* |
| * Check for QSFP MOD_PRS changes |
| * only works for single port if IB1 != pidx1 |
| */ |
| for (pidx = 0; pidx < dd->num_pports && (dd->flags & QIB_HAS_QSFP); |
| ++pidx) { |
| struct qib_pportdata *ppd; |
| struct qib_qsfp_data *qd; |
| u32 mask; |
| if (!dd->pport[pidx].link_speed_supported) |
| continue; |
| mask = QSFP_GPIO_MOD_PRS_N; |
| ppd = dd->pport + pidx; |
| mask <<= (QSFP_GPIO_PORT2_SHIFT * ppd->hw_pidx); |
| if (gpiostatus & dd->cspec->gpio_mask & mask) { |
| u64 pins; |
| qd = &ppd->cpspec->qsfp_data; |
| gpiostatus &= ~mask; |
| pins = qib_read_kreg64(dd, kr_extstatus); |
| pins >>= SYM_LSB(EXTStatus, GPIOIn); |
| if (!(pins & mask)) { |
| ++handled; |
| qd->t_insert = get_jiffies_64(); |
| queue_work(ib_wq, &qd->work); |
| } |
| } |
| } |
| |
| if (gpiostatus && !handled) { |
| const u32 mask = qib_read_kreg32(dd, kr_gpio_mask); |
| u32 gpio_irq = mask & gpiostatus; |
| |
| /* |
| * Clear any troublemakers, and update chip from shadow |
| */ |
| dd->cspec->gpio_mask &= ~gpio_irq; |
| qib_write_kreg(dd, kr_gpio_mask, dd->cspec->gpio_mask); |
| } |
| } |
| |
| /* |
| * Handle errors and unusual events first, separate function |
| * to improve cache hits for fast path interrupt handling. |
| */ |
| static noinline void unlikely_7322_intr(struct qib_devdata *dd, u64 istat) |
| { |
| if (istat & ~QIB_I_BITSEXTANT) |
| unknown_7322_ibits(dd, istat); |
| if (istat & QIB_I_GPIO) |
| unknown_7322_gpio_intr(dd); |
| if (istat & QIB_I_C_ERROR) { |
| qib_write_kreg(dd, kr_errmask, 0ULL); |
| tasklet_schedule(&dd->error_tasklet); |
| } |
| if (istat & INT_MASK_P(Err, 0) && dd->rcd[0]) |
| handle_7322_p_errors(dd->rcd[0]->ppd); |
| if (istat & INT_MASK_P(Err, 1) && dd->rcd[1]) |
| handle_7322_p_errors(dd->rcd[1]->ppd); |
| } |
| |
| /* |
| * Dynamically adjust the rcv int timeout for a context based on incoming |
| * packet rate. |
| */ |
| static void adjust_rcv_timeout(struct qib_ctxtdata *rcd, int npkts) |
| { |
| struct qib_devdata *dd = rcd->dd; |
| u32 timeout = dd->cspec->rcvavail_timeout[rcd->ctxt]; |
| |
| /* |
| * Dynamically adjust idle timeout on chip |
| * based on number of packets processed. |
| */ |
| if (npkts < rcv_int_count && timeout > 2) |
| timeout >>= 1; |
| else if (npkts >= rcv_int_count && timeout < rcv_int_timeout) |
| timeout = min(timeout << 1, rcv_int_timeout); |
| else |
| return; |
| |
| dd->cspec->rcvavail_timeout[rcd->ctxt] = timeout; |
| qib_write_kreg(dd, kr_rcvavailtimeout + rcd->ctxt, timeout); |
| } |
| |
| /* |
| * This is the main interrupt handler. |
| * It will normally only be used for low frequency interrupts but may |
| * have to handle all interrupts if INTx is enabled or fewer than normal |
| * MSIx interrupts were allocated. |
| * This routine should ignore the interrupt bits for any of the |
| * dedicated MSIx handlers. |
| */ |
| static irqreturn_t qib_7322intr(int irq, void *data) |
| { |
| struct qib_devdata *dd = data; |
| irqreturn_t ret; |
| u64 istat; |
| u64 ctxtrbits; |
| u64 rmask; |
| unsigned i; |
| u32 npkts; |
| |
| if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) { |
| /* |
| * This return value is not great, but we do not want the |
| * interrupt core code to remove our interrupt handler |
| * because we don't appear to be handling an interrupt |
| * during a chip reset. |
| */ |
| ret = IRQ_HANDLED; |
| goto bail; |
| } |
| |
| istat = qib_read_kreg64(dd, kr_intstatus); |
| |
| if (unlikely(istat == ~0ULL)) { |
| qib_bad_intrstatus(dd); |
| qib_dev_err(dd, "Interrupt status all f's, skipping\n"); |
| /* don't know if it was our interrupt or not */ |
| ret = IRQ_NONE; |
| goto bail; |
| } |
| |
| istat &= dd->cspec->main_int_mask; |
| if (unlikely(!istat)) { |
| /* already handled, or shared and not us */ |
| ret = IRQ_NONE; |
| goto bail; |
| } |
| |
| qib_stats.sps_ints++; |
| if (dd->int_counter != (u32) -1) |
| dd->int_counter++; |
| |
| /* handle "errors" of various kinds first, device ahead of port */ |
| if (unlikely(istat & (~QIB_I_BITSEXTANT | QIB_I_GPIO | |
| QIB_I_C_ERROR | INT_MASK_P(Err, 0) | |
| INT_MASK_P(Err, 1)))) |
| unlikely_7322_intr(dd, istat); |
| |
| /* |
| * Clear the interrupt bits we found set, relatively early, so we |
| * "know" know the chip will have seen this by the time we process |
| * the queue, and will re-interrupt if necessary. The processor |
| * itself won't take the interrupt again until we return. |
| */ |
| qib_write_kreg(dd, kr_intclear, istat); |
| |
| /* |
| * Handle kernel receive queues before checking for pio buffers |
| * available since receives can overflow; piobuf waiters can afford |
| * a few extra cycles, since they were waiting anyway. |
| */ |
| ctxtrbits = istat & (QIB_I_RCVAVAIL_MASK | QIB_I_RCVURG_MASK); |
| if (ctxtrbits) { |
| rmask = (1ULL << QIB_I_RCVAVAIL_LSB) | |
| (1ULL << QIB_I_RCVURG_LSB); |
| for (i = 0; i < dd->first_user_ctxt; i++) { |
| if (ctxtrbits & rmask) { |
| ctxtrbits &= ~rmask; |
| if (dd->rcd[i]) |
| qib_kreceive(dd->rcd[i], NULL, &npkts); |
| } |
| rmask <<= 1; |
| } |
| if (ctxtrbits) { |
| ctxtrbits = (ctxtrbits >> QIB_I_RCVAVAIL_LSB) | |
| (ctxtrbits >> QIB_I_RCVURG_LSB); |
| qib_handle_urcv(dd, ctxtrbits); |
| } |
| } |
| |
| if (istat & (QIB_I_P_SDMAINT(0) | QIB_I_P_SDMAINT(1))) |
| sdma_7322_intr(dd, istat); |
| |
| if ((istat & QIB_I_SPIOBUFAVAIL) && (dd->flags & QIB_INITTED)) |
| qib_ib_piobufavail(dd); |
| |
| ret = IRQ_HANDLED; |
| bail: |
| return ret; |
| } |
| |
| /* |
| * Dedicated receive packet available interrupt handler. |
| */ |
| static irqreturn_t qib_7322pintr(int irq, void *data) |
| { |
| struct qib_ctxtdata *rcd = data; |
| struct qib_devdata *dd = rcd->dd; |
| u32 npkts; |
| |
| if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) |
| /* |
| * This return value is not great, but we do not want the |
| * interrupt core code to remove our interrupt handler |
| * because we don't appear to be handling an interrupt |
| * during a chip reset. |
| */ |
| return IRQ_HANDLED; |
| |
| qib_stats.sps_ints++; |
| if (dd->int_counter != (u32) -1) |
| dd->int_counter++; |
| |
| /* Clear the interrupt bit we expect to be set. */ |
| qib_write_kreg(dd, kr_intclear, ((1ULL << QIB_I_RCVAVAIL_LSB) | |
| (1ULL << QIB_I_RCVURG_LSB)) << rcd->ctxt); |
| |
| qib_kreceive(rcd, NULL, &npkts); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* |
| * Dedicated Send buffer available interrupt handler. |
| */ |
| static irqreturn_t qib_7322bufavail(int irq, void *data) |
| { |
| struct qib_devdata *dd = data; |
| |
| if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) |
| /* |
| * This return value is not great, but we do not want the |
| * interrupt core code to remove our interrupt handler |
| * because we don't appear to be handling an interrupt |
| * during a chip reset. |
| */ |
| return IRQ_HANDLED; |
| |
| qib_stats.sps_ints++; |
| if (dd->int_counter != (u32) -1) |
| dd->int_counter++; |
| |
| /* Clear the interrupt bit we expect to be set. */ |
| qib_write_kreg(dd, kr_intclear, QIB_I_SPIOBUFAVAIL); |
| |
| /* qib_ib_piobufavail() will clear the want PIO interrupt if needed */ |
| if (dd->flags & QIB_INITTED) |
| qib_ib_piobufavail(dd); |
| else |
| qib_wantpiobuf_7322_intr(dd, 0); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* |
| * Dedicated Send DMA interrupt handler. |
| */ |
| static irqreturn_t sdma_intr(int irq, void *data) |
| { |
| struct qib_pportdata *ppd = data; |
| struct qib_devdata *dd = ppd->dd; |
| |
| if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) |
| /* |
| * This return value is not great, but we do not want the |
| * interrupt core code to remove our interrupt handler |
| * because we don't appear to be handling an interrupt |
| * during a chip reset. |
| */ |
| return IRQ_HANDLED; |
| |
| qib_stats.sps_ints++; |
| if (dd->int_counter != (u32) -1) |
| dd->int_counter++; |
| |
| /* Clear the interrupt bit we expect to be set. */ |
| qib_write_kreg(dd, kr_intclear, ppd->hw_pidx ? |
| INT_MASK_P(SDma, 1) : INT_MASK_P(SDma, 0)); |
| qib_sdma_intr(ppd); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* |
| * Dedicated Send DMA idle interrupt handler. |
| */ |
| static irqreturn_t sdma_idle_intr(int irq, void *data) |
| { |
| struct qib_pportdata *ppd = data; |
| struct qib_devdata *dd = ppd->dd; |
| |
| if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) |
| /* |
| * This return value is not great, but we do not want the |
| * interrupt core code to remove our interrupt handler |
| * because we don't appear to be handling an interrupt |
| * during a chip reset. |
| */ |
| return IRQ_HANDLED; |
| |
| qib_stats.sps_ints++; |
| if (dd->int_counter != (u32) -1) |
| dd->int_counter++; |
| |
| /* Clear the interrupt bit we expect to be set. */ |
| qib_write_kreg(dd, kr_intclear, ppd->hw_pidx ? |
| INT_MASK_P(SDmaIdle, 1) : INT_MASK_P(SDmaIdle, 0)); |
| qib_sdma_intr(ppd); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* |
| * Dedicated Send DMA progress interrupt handler. |
| */ |
| static irqreturn_t sdma_progress_intr(int irq, void *data) |
| { |
| struct qib_pportdata *ppd = data; |
| struct qib_devdata *dd = ppd->dd; |
| |
| if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) |
| /* |
| * This return value is not great, but we do not want the |
| * interrupt core code to remove our interrupt handler |
| * because we don't appear to be handling an interrupt |
| * during a chip reset. |
| */ |
| return IRQ_HANDLED; |
| |
| qib_stats.sps_ints++; |
| if (dd->int_counter != (u32) -1) |
| dd->int_counter++; |
| |
| /* Clear the interrupt bit we expect to be set. */ |
| qib_write_kreg(dd, kr_intclear, ppd->hw_pidx ? |
| INT_MASK_P(SDmaProgress, 1) : |
| INT_MASK_P(SDmaProgress, 0)); |
| qib_sdma_intr(ppd); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* |
| * Dedicated Send DMA cleanup interrupt handler. |
| */ |
| static irqreturn_t sdma_cleanup_intr(int irq, void *data) |
| { |
| struct qib_pportdata *ppd = data; |
| struct qib_devdata *dd = ppd->dd; |
| |
| if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) |
| /* |
| * This return value is not great, but we do not want the |
| * interrupt core code to remove our interrupt handler |
| * because we don't appear to be handling an interrupt |
| * during a chip reset. |
| */ |
| return IRQ_HANDLED; |
| |
| qib_stats.sps_ints++; |
| if (dd->int_counter != (u32) -1) |
| dd->int_counter++; |
| |
| /* Clear the interrupt bit we expect to be set. */ |
| qib_write_kreg(dd, kr_intclear, ppd->hw_pidx ? |
| INT_MASK_PM(SDmaCleanupDone, 1) : |
| INT_MASK_PM(SDmaCleanupDone, 0)); |
| qib_sdma_process_event(ppd, qib_sdma_event_e20_hw_started); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* |
| * Set up our chip-specific interrupt handler. |
| * The interrupt type has already been setup, so |
| * we just need to do the registration and error checking. |
| * If we are using MSIx interrupts, we may fall back to |
| * INTx later, if the interrupt handler doesn't get called |
| * within 1/2 second (see verify_interrupt()). |
| */ |
| static void qib_setup_7322_interrupt(struct qib_devdata *dd, int clearpend) |
| { |
| int ret, i, msixnum; |
| u64 redirect[6]; |
| u64 mask; |
| |
| if (!dd->num_pports) |
| return; |
| |
| if (clearpend) { |
| /* |
| * if not switching interrupt types, be sure interrupts are |
| * disabled, and then clear anything pending at this point, |
| * because we are starting clean. |
| */ |
| qib_7322_set_intr_state(dd, 0); |
| |
| /* clear the reset error, init error/hwerror mask */ |
| qib_7322_init_hwerrors(dd); |
| |
| /* clear any interrupt bits that might be set */ |
| qib_write_kreg(dd, kr_intclear, ~0ULL); |
| |
| /* make sure no pending MSIx intr, and clear diag reg */ |
| qib_write_kreg(dd, kr_intgranted, ~0ULL); |
| qib_write_kreg(dd, kr_vecclr_wo_int, ~0ULL); |
| } |
| |
| if (!dd->cspec->num_msix_entries) { |
| /* Try to get INTx interrupt */ |
| try_intx: |
| if (!dd->pcidev->irq) { |
| qib_dev_err(dd, "irq is 0, BIOS error? " |
| "Interrupts won't work\n"); |
| goto bail; |
| } |
| ret = request_irq(dd->pcidev->irq, qib_7322intr, |
| IRQF_SHARED, QIB_DRV_NAME, dd); |
| if (ret) { |
| qib_dev_err(dd, "Couldn't setup INTx " |
| "interrupt (irq=%d): %d\n", |
| dd->pcidev->irq, ret); |
| goto bail; |
| } |
| dd->cspec->irq = dd->pcidev->irq; |
| dd->cspec->main_int_mask = ~0ULL; |
| goto bail; |
| } |
| |
| /* Try to get MSIx interrupts */ |
| memset(redirect, 0, sizeof redirect); |
| mask = ~0ULL; |
| msixnum = 0; |
| for (i = 0; msixnum < dd->cspec->num_msix_entries; i++) { |
| irq_handler_t handler; |
| const char *name; |
| void *arg; |
| u64 val; |
| int lsb, reg, sh; |
| |
| if (i < ARRAY_SIZE(irq_table)) { |
| if (irq_table[i].port) { |
| /* skip if for a non-configured port */ |
| if (irq_table[i].port > dd->num_pports) |
| continue; |
| arg = dd->pport + irq_table[i].port - 1; |
| } else |
| arg = dd; |
| lsb = irq_table[i].lsb; |
| handler = irq_table[i].handler; |
| name = irq_table[i].name; |
| } else { |
| unsigned ctxt; |
| |
| ctxt = i - ARRAY_SIZE(irq_table); |
| /* per krcvq context receive interrupt */ |
| arg = dd->rcd[ctxt]; |
| if (!arg) |
| continue; |
| if (qib_krcvq01_no_msi && ctxt < 2) |
| continue; |
| lsb = QIB_I_RCVAVAIL_LSB + ctxt; |
| handler = qib_7322pintr; |
| name = QIB_DRV_NAME " (kctx)"; |
| } |
| ret = request_irq(dd->cspec->msix_entries[msixnum].vector, |
| handler, 0, name, arg); |
| if (ret) { |
| /* |
| * Shouldn't happen since the enable said we could |
| * have as many as we are trying to setup here. |
| */ |
| qib_dev_err(dd, "Couldn't setup MSIx " |
| "interrupt (vec=%d, irq=%d): %d\n", msixnum, |
| dd->cspec->msix_entries[msixnum].vector, |
| ret); |
| qib_7322_nomsix(dd); |
| goto try_intx; |
| } |
| dd->cspec->msix_arg[msixnum] = arg; |
| if (lsb >= 0) { |
| reg = lsb / IBA7322_REDIRECT_VEC_PER_REG; |
| sh = (lsb % IBA7322_REDIRECT_VEC_PER_REG) * |
| SYM_LSB(IntRedirect0, vec1); |
| mask &= ~(1ULL << lsb); |
| redirect[reg] |= ((u64) msixnum) << sh; |
| } |
| val = qib_read_kreg64(dd, 2 * msixnum + 1 + |
| (QIB_7322_MsixTable_OFFS / sizeof(u64))); |
| msixnum++; |
| } |
| /* Initialize the vector mapping */ |
| for (i = 0; i < ARRAY_SIZE(redirect); i++) |
| qib_write_kreg(dd, kr_intredirect + i, redirect[i]); |
| dd->cspec->main_int_mask = mask; |
| tasklet_init(&dd->error_tasklet, qib_error_tasklet, |
| (unsigned long)dd); |
| bail:; |
| } |
| |
| /** |
| * qib_7322_boardname - fill in the board name and note features |
| * @dd: the qlogic_ib device |
| * |
| * info will be based on the board revision register |
| */ |
| static unsigned qib_7322_boardname(struct qib_devdata *dd) |
| { |
| /* Will need enumeration of board-types here */ |
| char *n; |
| u32 boardid, namelen; |
| unsigned features = DUAL_PORT_CAP; |
| |
| boardid = SYM_FIELD(dd->revision, Revision, BoardID); |
| |
| switch (boardid) { |
| case 0: |
| n = "InfiniPath_QLE7342_Emulation"; |
| break; |
| case 1: |
| n = "InfiniPath_QLE7340"; |
| dd->flags |= QIB_HAS_QSFP; |
| features = PORT_SPD_CAP; |
| break; |
| case 2: |
| n = "InfiniPath_QLE7342"; |
| dd->flags |= QIB_HAS_QSFP; |
| break; |
| case 3: |
| n = "InfiniPath_QMI7342"; |
| break; |
| case 4: |
| n = "InfiniPath_Unsupported7342"; |
| qib_dev_err(dd, "Unsupported version of QMH7342\n"); |
| features = 0; |
| break; |
| case BOARD_QMH7342: |
| n = "InfiniPath_QMH7342"; |
| features = 0x24; |
| break; |
| case BOARD_QME7342: |
| n = "InfiniPath_QME7342"; |
| break; |
| case 8: |
| n = "InfiniPath_QME7362"; |
| dd->flags |= QIB_HAS_QSFP; |
| break; |
| case 15: |
| n = "InfiniPath_QLE7342_TEST"; |
| dd->flags |= QIB_HAS_QSFP; |
| break; |
| default: |
| n = "InfiniPath_QLE73xy_UNKNOWN"; |
| qib_dev_err(dd, "Unknown 7322 board type %u\n", boardid); |
| break; |
| } |
| dd->board_atten = 1; /* index into txdds_Xdr */ |
| |
| namelen = strlen(n) + 1; |
| dd->boardname = kmalloc(namelen, GFP_KERNEL); |
| if (!dd->boardname) |
| qib_dev_err(dd, "Failed allocation for board name: %s\n", n); |
| else |
| snprintf(dd->boardname, namelen, "%s", n); |
| |
| snprintf(dd->boardversion, sizeof(dd->boardversion), |
| "ChipABI %u.%u, %s, InfiniPath%u %u.%u, SW Compat %u\n", |
| QIB_CHIP_VERS_MAJ, QIB_CHIP_VERS_MIN, dd->boardname, |
| (unsigned)SYM_FIELD(dd->revision, Revision_R, Arch), |
| dd->majrev, dd->minrev, |
| (unsigned)SYM_FIELD(dd->revision, Revision_R, SW)); |
| |
| if (qib_singleport && (features >> PORT_SPD_CAP_SHIFT) & PORT_SPD_CAP) { |
| qib_devinfo(dd->pcidev, "IB%u: Forced to single port mode" |
| " by module parameter\n", dd->unit); |
| features &= PORT_SPD_CAP; |
| } |
| |
| return features; |
| } |
| |
| /* |
| * This routine sleeps, so it can only be called from user context, not |
| * from interrupt context. |
| */ |
| static int qib_do_7322_reset(struct qib_devdata *dd) |
| { |
| u64 val; |
| u64 *msix_vecsave; |
| int i, msix_entries, ret = 1; |
| u16 cmdval; |
| u8 int_line, clinesz; |
| unsigned long flags; |
| |
| /* Use dev_err so it shows up in logs, etc. */ |
| qib_dev_err(dd, "Resetting InfiniPath unit %u\n", dd->unit); |
| |
| qib_pcie_getcmd(dd, &cmdval, &int_line, &clinesz); |
| |
| msix_entries = dd->cspec->num_msix_entries; |
| |
| /* no interrupts till re-initted */ |
| qib_7322_set_intr_state(dd, 0); |
| |
| if (msix_entries) { |
| qib_7322_nomsix(dd); |
| /* can be up to 512 bytes, too big for stack */ |
| msix_vecsave = kmalloc(2 * dd->cspec->num_msix_entries * |
| sizeof(u64), GFP_KERNEL); |
| if (!msix_vecsave) |
| qib_dev_err(dd, "No mem to save MSIx data\n"); |
| } else |
| msix_vecsave = NULL; |
| |
| /* |
| * Core PCI (as of 2.6.18) doesn't save or rewrite the full vector |
| * info that is set up by the BIOS, so we have to save and restore |
| * it ourselves. There is some risk something could change it, |
| * after we save it, but since we have disabled the MSIx, it |
| * shouldn't be touched... |
| */ |
| for (i = 0; i < msix_entries; i++) { |
| u64 vecaddr, vecdata; |
| vecaddr = qib_read_kreg64(dd, 2 * i + |
| (QIB_7322_MsixTable_OFFS / sizeof(u64))); |
| vecdata = qib_read_kreg64(dd, 1 + 2 * i + |
| (QIB_7322_MsixTable_OFFS / sizeof(u64))); |
| if (msix_vecsave) { |
| msix_vecsave[2 * i] = vecaddr; |
| /* save it without the masked bit set */ |
| msix_vecsave[1 + 2 * i] = vecdata & ~0x100000000ULL; |
| } |
| } |
| |
| dd->pport->cpspec->ibdeltainprog = 0; |
| dd->pport->cpspec->ibsymdelta = 0; |
| dd->pport->cpspec->iblnkerrdelta = 0; |
| dd->pport->cpspec->ibmalfdelta = 0; |
| dd->int_counter = 0; /* so we check interrupts work again */ |
| |
| /* |
| * Keep chip from being accessed until we are ready. Use |
| * writeq() directly, to allow the write even though QIB_PRESENT |
| * isn't set. |
| */ |
| dd->flags &= ~(QIB_INITTED | QIB_PRESENT | QIB_BADINTR); |
| dd->flags |= QIB_DOING_RESET; |
| val = dd->control | QLOGIC_IB_C_RESET; |
| writeq(val, &dd->kregbase[kr_control]); |
| |
| for (i = 1; i <= 5; i++) { |
| /* |
| * Allow MBIST, etc. to complete; longer on each retry. |
| * We sometimes get machine checks from bus timeout if no |
| * response, so for now, make it *really* long. |
| */ |
| msleep(1000 + (1 + i) * 3000); |
| |
| qib_pcie_reenable(dd, cmdval, int_line, clinesz); |
| |
| /* |
| * Use readq directly, so we don't need to mark it as PRESENT |
| * until we get a successful indication that all is well. |
| */ |
| val = readq(&dd->kregbase[kr_revision]); |
| if (val == dd->revision) |
| break; |
| if (i == 5) { |
| qib_dev_err(dd, "Failed to initialize after reset, " |
| "unusable\n"); |
| ret = 0; |
| goto bail; |
| } |
| } |
| |
| dd->flags |= QIB_PRESENT; /* it's back */ |
| |
| if (msix_entries) { |
| /* restore the MSIx vector address and data if saved above */ |
| for (i = 0; i < msix_entries; i++) { |
| dd->cspec->msix_entries[i].entry = i; |
| if (!msix_vecsave || !msix_vecsave[2 * i]) |
| continue; |
| qib_write_kreg(dd, 2 * i + |
| (QIB_7322_MsixTable_OFFS / sizeof(u64)), |
| msix_vecsave[2 * i]); |
| qib_write_kreg(dd, 1 + 2 * i + |
| (QIB_7322_MsixTable_OFFS / sizeof(u64)), |
| msix_vecsave[1 + 2 * i]); |
| } |
| } |
| |
| /* initialize the remaining registers. */ |
| for (i = 0; i < dd->num_pports; ++i) |
| write_7322_init_portregs(&dd->pport[i]); |
| write_7322_initregs(dd); |
| |
| if (qib_pcie_params(dd, dd->lbus_width, |
| &dd->cspec->num_msix_entries, |
| dd->cspec->msix_entries)) |
| qib_dev_err(dd, "Reset failed to setup PCIe or interrupts; " |
| "continuing anyway\n"); |
| |
| qib_setup_7322_interrupt(dd, 1); |
| |
| for (i = 0; i < dd->num_pports; ++i) { |
| struct qib_pportdata *ppd = &dd->pport[i]; |
| |
| spin_lock_irqsave(&ppd->lflags_lock, flags); |
| ppd->lflags |= QIBL_IB_FORCE_NOTIFY; |
| ppd->lflags &= ~QIBL_IB_AUTONEG_FAILED; |
| spin_unlock_irqrestore(&ppd->lflags_lock, flags); |
| } |
| |
| bail: |
| dd->flags &= ~QIB_DOING_RESET; /* OK or not, no longer resetting */ |
| kfree(msix_vecsave); |
| return ret; |
| } |
| |
| /** |
| * qib_7322_put_tid - write a TID to the chip |
| * @dd: the qlogic_ib device |
| * @tidptr: pointer to the expected TID (in chip) to update |
| * @tidtype: 0 for eager, 1 for expected |
| * @pa: physical address of in memory buffer; tidinvalid if freeing |
| */ |
| static void qib_7322_put_tid(struct qib_devdata *dd, u64 __iomem *tidptr, |
| u32 type, unsigned long pa) |
| { |
| if (!(dd->flags & QIB_PRESENT)) |
| return; |
| if (pa != dd->tidinvalid) { |
| u64 chippa = pa >> IBA7322_TID_PA_SHIFT; |
| |
| /* paranoia checks */ |
| if (pa != (chippa << IBA7322_TID_PA_SHIFT)) { |
| qib_dev_err(dd, "Physaddr %lx not 2KB aligned!\n", |
| pa); |
| return; |
| } |
| if (chippa >= (1UL << IBA7322_TID_SZ_SHIFT)) { |
| qib_dev_err(dd, "Physical page address 0x%lx " |
| "larger than supported\n", pa); |
| return; |
| } |
| |
| if (type == RCVHQ_RCV_TYPE_EAGER) |
| chippa |= dd->tidtemplate; |
| else /* for now, always full 4KB page */ |
| chippa |= IBA7322_TID_SZ_4K; |
| pa = chippa; |
| } |
| writeq(pa, tidptr); |
| mmiowb(); |
| } |
| |
| /** |
| * qib_7322_clear_tids - clear all TID entries for a ctxt, expected and eager |
| * @dd: the qlogic_ib device |
| * @ctxt: the ctxt |
| * |
| * clear all TID entries for a ctxt, expected and eager. |
| * Used from qib_close(). |
| */ |
| static void qib_7322_clear_tids(struct qib_devdata *dd, |
| struct qib_ctxtdata *rcd) |
| { |
| u64 __iomem *tidbase; |
| unsigned long tidinv; |
| u32 ctxt; |
| int i; |
| |
| if (!dd->kregbase || !rcd) |
| return; |
| |
| ctxt = rcd->ctxt; |
| |
| tidinv = dd->tidinvalid; |
| tidbase = (u64 __iomem *) |
| ((char __iomem *) dd->kregbase + |
| dd->rcvtidbase + |
| ctxt * dd->rcvtidcnt * sizeof(*tidbase)); |
| |
| for (i = 0; i < dd->rcvtidcnt; i++) |
| qib_7322_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EXPECTED, |
| tidinv); |
| |
| tidbase = (u64 __iomem *) |
| ((char __iomem *) dd->kregbase + |
| dd->rcvegrbase + |
| rcd->rcvegr_tid_base * sizeof(*tidbase)); |
| |
| for (i = 0; i < rcd->rcvegrcnt; i++) |
| qib_7322_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EAGER, |
| tidinv); |
| } |
| |
| /** |
| * qib_7322_tidtemplate - setup constants for TID updates |
| * @dd: the qlogic_ib device |
| * |
| * We setup stuff that we use a lot, to avoid calculating each time |
| */ |
| static void qib_7322_tidtemplate(struct qib_devdata *dd) |
| { |
| /* |
| * For now, we always allocate 4KB buffers (at init) so we can |
| * receive max size packets. We may want a module parameter to |
| * specify 2KB or 4KB and/or make it per port instead of per device |
| * for those who want to reduce memory footprint. Note that the |
| * rcvhdrentsize size must be large enough to hold the largest |
| * IB header (currently 96 bytes) that we expect to handle (plus of |
| * course the 2 dwords of RHF). |
| */ |
| if (dd->rcvegrbufsize == 2048) |
| dd->tidtemplate = IBA7322_TID_SZ_2K; |
| else if (dd->rcvegrbufsize == 4096) |
| dd->tidtemplate = IBA7322_TID_SZ_4K; |
| dd->tidinvalid = 0; |
| } |
| |
| /** |
| * qib_init_7322_get_base_info - set chip-specific flags for user code |
| * @rcd: the qlogic_ib ctxt |
| * @kbase: qib_base_info pointer |
| * |
| * We set the PCIE flag because the lower bandwidth on PCIe vs |
| * HyperTransport can affect some user packet algorithims. |
| */ |
| |
| static int qib_7322_get_base_info(struct qib_ctxtdata *rcd, |
| struct qib_base_info *kinfo) |
| { |
| kinfo->spi_runtime_flags |= QIB_RUNTIME_CTXT_MSB_IN_QP | |
| QIB_RUNTIME_PCIE | QIB_RUNTIME_NODMA_RTAIL | |
| QIB_RUNTIME_HDRSUPP | QIB_RUNTIME_SDMA; |
| if (rcd->dd->cspec->r1) |
| kinfo->spi_runtime_flags |= QIB_RUNTIME_RCHK; |
| if (rcd->dd->flags & QIB_USE_SPCL_TRIG) |
| kinfo->spi_runtime_flags |= QIB_RUNTIME_SPECIAL_TRIGGER; |
| |
| return 0; |
| } |
| |
| static struct qib_message_header * |
| qib_7322_get_msgheader(struct qib_devdata *dd, __le32 *rhf_addr) |
| { |
| u32 offset = qib_hdrget_offset(rhf_addr); |
| |
| return (struct qib_message_header *) |
| (rhf_addr - dd->rhf_offset + offset); |
| } |
| |
| /* |
| * Configure number of contexts. |
| */ |
| static void qib_7322_config_ctxts(struct qib_devdata *dd) |
| { |
| unsigned long flags; |
| u32 nchipctxts; |
| |
| nchipctxts = qib_read_kreg32(dd, kr_contextcnt); |
| dd->cspec->numctxts = nchipctxts; |
| if (qib_n_krcv_queues > 1 && dd->num_pports) { |
| dd->first_user_ctxt = NUM_IB_PORTS + |
| (qib_n_krcv_queues - 1) * dd->num_pports; |
| if (dd->first_user_ctxt > nchipctxts) |
| dd->first_user_ctxt = nchipctxts; |
| dd->n_krcv_queues = dd->first_user_ctxt / dd->num_pports; |
| } else { |
| dd->first_user_ctxt = NUM_IB_PORTS; |
| dd->n_krcv_queues = 1; |
| } |
| |
| if (!qib_cfgctxts) { |
| int nctxts = dd->first_user_ctxt + num_online_cpus(); |
| |
| if (nctxts <= 6) |
| dd->ctxtcnt = 6; |
| else if (nctxts <= 10) |
| dd->ctxtcnt = 10; |
| else if (nctxts <= nchipctxts) |
| dd->ctxtcnt = nchipctxts; |
| } else if (qib_cfgctxts < dd->num_pports) |
| dd->ctxtcnt = dd->num_pports; |
| else if (qib_cfgctxts <= nchipctxts) |
| dd->ctxtcnt = qib_cfgctxts; |
| if (!dd->ctxtcnt) /* none of the above, set to max */ |
| dd->ctxtcnt = nchipctxts; |
| |
| /* |
| * Chip can be configured for 6, 10, or 18 ctxts, and choice |
| * affects number of eager TIDs per ctxt (1K, 2K, 4K). |
| * Lock to be paranoid about later motion, etc. |
| */ |
| spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags); |
| if (dd->ctxtcnt > 10) |
| dd->rcvctrl |= 2ULL << SYM_LSB(RcvCtrl, ContextCfg); |
| else if (dd->ctxtcnt > 6) |
| dd->rcvctrl |= 1ULL << SYM_LSB(RcvCtrl, ContextCfg); |
| /* else configure for default 6 receive ctxts */ |
| |
| /* The XRC opcode is 5. */ |
| dd->rcvctrl |= 5ULL << SYM_LSB(RcvCtrl, XrcTypeCode); |
| |
| /* |
| * RcvCtrl *must* be written here so that the |
| * chip understands how to change rcvegrcnt below. |
| */ |
| qib_write_kreg(dd, kr_rcvctrl, dd->rcvctrl); |
| spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags); |
| |
| /* kr_rcvegrcnt changes based on the number of contexts enabled */ |
| dd->cspec->rcvegrcnt = qib_read_kreg32(dd, kr_rcvegrcnt); |
| if (qib_rcvhdrcnt) |
| dd->rcvhdrcnt = max(dd->cspec->rcvegrcnt, qib_rcvhdrcnt); |
| else |
| dd->rcvhdrcnt = max(dd->cspec->rcvegrcnt, |
| dd->num_pports > 1 ? 1024U : 2048U); |
| } |
| |
| static int qib_7322_get_ib_cfg(struct qib_pportdata *ppd, int which) |
| { |
| |
| int lsb, ret = 0; |
| u64 maskr; /* right-justified mask */ |
| |
| switch (which) { |
| |
| case QIB_IB_CFG_LWID_ENB: /* Get allowed Link-width */ |
| ret = ppd->link_width_enabled; |
| goto done; |
| |
| case QIB_IB_CFG_LWID: /* Get currently active Link-width */ |
| ret = ppd->link_width_active; |
| goto done; |
| |
| case QIB_IB_CFG_SPD_ENB: /* Get allowed Link speeds */ |
| ret = ppd->link_speed_enabled; |
| goto done; |
| |
| case QIB_IB_CFG_SPD: /* Get current Link spd */ |
| ret = ppd->link_speed_active; |
| goto done; |
| |
| case QIB_IB_CFG_RXPOL_ENB: /* Get Auto-RX-polarity enable */ |
| lsb = SYM_LSB(IBCCtrlB_0, IB_POLARITY_REV_SUPP); |
| maskr = SYM_RMASK(IBCCtrlB_0, IB_POLARITY_REV_SUPP); |
| break; |
| |
| case QIB_IB_CFG_LREV_ENB: /* Get Auto-Lane-reversal enable */ |
| lsb = SYM_LSB(IBCCtrlB_0, IB_LANE_REV_SUPPORTED); |
| maskr = SYM_RMASK(IBCCtrlB_0, IB_LANE_REV_SUPPORTED); |
| break; |
| |
| case QIB_IB_CFG_LINKLATENCY: |
| ret = qib_read_kreg_port(ppd, krp_ibcstatus_b) & |
| SYM_MASK(IBCStatusB_0, LinkRoundTripLatency); |
| goto done; |
| |
| case QIB_IB_CFG_OP_VLS: |
| ret = ppd->vls_operational; |
| goto done; |
| |
| case QIB_IB_CFG_VL_HIGH_CAP: |
| ret = 16; |
| goto done; |
| |
| case QIB_IB_CFG_VL_LOW_CAP: |
| ret = 16; |
| goto done; |
| |
| case QIB_IB_CFG_OVERRUN_THRESH: /* IB overrun threshold */ |
| ret = SYM_FIELD(ppd->cpspec->ibcctrl_a, IBCCtrlA_0, |
| OverrunThreshold); |
| goto done; |
| |
| case QIB_IB_CFG_PHYERR_THRESH: /* IB PHY error threshold */ |
| ret = SYM_FIELD(ppd->cpspec->ibcctrl_a, IBCCtrlA_0, |
| PhyerrThreshold); |
| goto done; |
| |
| case QIB_IB_CFG_LINKDEFAULT: /* IB link default (sleep/poll) */ |
| /* will only take effect when the link state changes */ |
| ret = (ppd->cpspec->ibcctrl_a & |
| SYM_MASK(IBCCtrlA_0, LinkDownDefaultState)) ? |
| IB_LINKINITCMD_SLEEP : IB_LINKINITCMD_POLL; |
| goto done; |
| |
| case QIB_IB_CFG_HRTBT: /* Get Heartbeat off/enable/auto */ |
| lsb = IBA7322_IBC_HRTBT_LSB; |
| maskr = IBA7322_IBC_HRTBT_RMASK; /* OR of AUTO and ENB */ |
| break; |
| |
| case QIB_IB_CFG_PMA_TICKS: |
| /* |
| * 0x00 = 10x link transfer rate or 4 nsec. for 2.5Gbs |
| * Since the clock is always 250MHz, the value is 3, 1 or 0. |
| */ |
| if (ppd->link_speed_active == QIB_IB_QDR) |
| ret = 3; |
| else if (ppd->link_speed_active == QIB_IB_DDR) |
| ret = 1; |
| else |
| ret = 0; |
| goto done; |
| |
| default: |
| ret = -EINVAL; |
| goto done; |
| } |
| ret = (int)((ppd->cpspec->ibcctrl_b >> lsb) & maskr); |
| done: |
| return ret; |
| } |
| |
| /* |
| * Below again cribbed liberally from older version. Do not lean |
| * heavily on it. |
| */ |
| #define IBA7322_IBC_DLIDLMC_SHIFT QIB_7322_IBCCtrlB_0_IB_DLID_LSB |
| #define IBA7322_IBC_DLIDLMC_MASK (QIB_7322_IBCCtrlB_0_IB_DLID_RMASK \ |
| | (QIB_7322_IBCCtrlB_0_IB_DLID_MASK_RMASK << 16)) |
| |
| static int qib_7322_set_ib_cfg(struct qib_pportdata *ppd, int which, u32 val) |
| { |
| struct qib_devdata *dd = ppd->dd; |
| u64 maskr; /* right-justified mask */ |
| int lsb, ret = 0; |
| u16 lcmd, licmd; |
| unsigned long flags; |
| |
| switch (which) { |
| case QIB_IB_CFG_LIDLMC: |
| /* |
| * Set LID and LMC. Combined to avoid possible hazard |
| * caller puts LMC in 16MSbits, DLID in 16LSbits of val |
| */ |
| lsb = IBA7322_IBC_DLIDLMC_SHIFT; |
| maskr = IBA7322_IBC_DLIDLMC_MASK; |
| /* |
| * For header-checking, the SLID in the packet will |
| * be masked with SendIBSLMCMask, and compared |
| * with SendIBSLIDAssignMask. Make sure we do not |
| * set any bits not covered by the mask, or we get |
| * false-positives. |
| */ |
| qib_write_kreg_port(ppd, krp_sendslid, |
| val & (val >> 16) & SendIBSLIDAssignMask); |
| qib_write_kreg_port(ppd, krp_sendslidmask, |
| (val >> 16) & SendIBSLMCMask); |
| break; |
| |
| case QIB_IB_CFG_LWID_ENB: /* set allowed Link-width */ |
| ppd->link_width_enabled = val; |
| /* convert IB value to chip register value */ |
| if (val == IB_WIDTH_1X) |
| val = 0; |
| else if (val == IB_WIDTH_4X) |
| val = 1; |
| else |
| val = 3; |
| maskr = SYM_RMASK(IBCCtrlB_0, IB_NUM_CHANNELS); |
| lsb = SYM_LSB(IBCCtrlB_0, IB_NUM_CHANNELS); |
| break; |
| |
| case QIB_IB_CFG_SPD_ENB: /* set allowed Link speeds */ |
| /* |
| * As with width, only write the actual register if the |
| * link is currently down, otherwise takes effect on next |
| * link change. Since setting is being explicitly requested |
| * (via MAD or sysfs), clear autoneg failure status if speed |
| * autoneg is enabled. |
| */ |
| ppd->link_speed_enabled = val; |
| val <<= IBA7322_IBC_SPEED_LSB; |
| maskr = IBA7322_IBC_SPEED_MASK | IBA7322_IBC_IBTA_1_2_MASK | |
| IBA7322_IBC_MAX_SPEED_MASK; |
| if (val & (val - 1)) { |
| /* Muliple speeds enabled */ |
| val |= IBA7322_IBC_IBTA_1_2_MASK | |
| IBA7322_IBC_MAX_SPEED_MASK; |
| spin_lock_irqsave(&ppd->lflags_lock, flags); |
| ppd->lflags &= ~QIBL_IB_AUTONEG_FAILED; |
| spin_unlock_irqrestore(&ppd->lflags_lock, flags); |
| } else if (val & IBA7322_IBC_SPEED_QDR) |
| val |= IBA7322_IBC_IBTA_1_2_MASK; |
| /* IBTA 1.2 mode + min/max + speed bits are contiguous */ |
| lsb = SYM_LSB(IBCCtrlB_0, IB_ENHANCED_MODE); |
| break; |
| |
| case QIB_IB_CFG_RXPOL_ENB: /* set Auto-RX-polarity enable */ |
| lsb = SYM_LSB(IBCCtrlB_0, IB_POLARITY_REV_SUPP); |
| maskr = SYM_RMASK(IBCCtrlB_0, IB_POLARITY_REV_SUPP); |
| break; |
| |
| case QIB_IB_CFG_LREV_ENB: /* set Auto-Lane-reversal enable */ |
| lsb = SYM_LSB(IBCCtrlB_0, IB_LANE_REV_SUPPORTED); |
| maskr = SYM_RMASK(IBCCtrlB_0, IB_LANE_REV_SUPPORTED); |
| break; |
| |
| case QIB_IB_CFG_OVERRUN_THRESH: /* IB overrun threshold */ |
| maskr = SYM_FIELD(ppd->cpspec->ibcctrl_a, IBCCtrlA_0, |
| OverrunThreshold); |
| if (maskr != val) { |
| ppd->cpspec->ibcctrl_a &= |
| ~SYM_MASK(IBCCtrlA_0, OverrunThreshold); |
| ppd->cpspec->ibcctrl_a |= (u64) val << |
| SYM_LSB(IBCCtrlA_0, OverrunThreshold); |
| qib_write_kreg_port(ppd, krp_ibcctrl_a, |
| ppd->cpspec->ibcctrl_a); |
| qib_write_kreg(dd, kr_scratch, 0ULL); |
| } |
| goto bail; |
| |
| case QIB_IB_CFG_PHYERR_THRESH: /* IB PHY error threshold */ |
| maskr = SYM_FIELD(ppd->cpspec->ibcctrl_a, IBCCtrlA_0, |
| PhyerrThreshold); |
| if (maskr != val) { |
| ppd->cpspec->ibcctrl_a &= |
| ~SYM_MASK(IBCCtrlA_0, PhyerrThreshold); |
| ppd->cpspec->ibcctrl_a |= (u64) val << |
| SYM_LSB(IBCCtrlA_0, PhyerrThreshold); |
| qib_write_kreg_port(ppd, krp_ibcctrl_a, |
| ppd->cpspec->ibcctrl_a); |
| qib_write_kreg(dd, kr_scratch, 0ULL); |
| } |
| goto bail; |
| |
| case QIB_IB_CFG_PKEYS: /* update pkeys */ |
| maskr = (u64) ppd->pkeys[0] | ((u64) ppd->pkeys[1] << 16) | |
| ((u64) ppd->pkeys[2] << 32) | |
| ((u64) ppd->pkeys[3] << 48); |
| qib_write_kreg_port(ppd, krp_partitionkey, maskr); |
| goto bail; |
| |
| case QIB_IB_CFG_LINKDEFAULT: /* IB link default (sleep/poll) */ |
| /* will only take effect when the link state changes */ |
| if (val == IB_LINKINITCMD_POLL) |
| ppd->cpspec->ibcctrl_a &= |
| ~SYM_MASK(IBCCtrlA_0, LinkDownDefaultState); |
| else /* SLEEP */ |
| ppd->cpspec->ibcctrl_a |= |
| SYM_MASK(IBCCtrlA_0, LinkDownDefaultState); |
| qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a); |
| qib_write_kreg(dd, kr_scratch, 0ULL); |
| goto bail; |
| |
| case QIB_IB_CFG_MTU: /* update the MTU in IBC */ |
| /* |
| * Update our housekeeping variables, and set IBC max |
| * size, same as init code; max IBC is max we allow in |
| * buffer, less the qword pbc, plus 1 for ICRC, in dwords |
| * Set even if it's unchanged, print debug message only |
| * on changes. |
| */ |
| val = (ppd->ibmaxlen >> 2) + 1; |
| ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, MaxPktLen); |
| ppd->cpspec->ibcctrl_a |= (u64)val << |
| SYM_LSB(IBCCtrlA_0, MaxPktLen); |
| qib_write_kreg_port(ppd, krp_ibcctrl_a, |
| ppd->cpspec->ibcctrl_a); |
| qib_write_kreg(dd, kr_scratch, 0ULL); |
| goto bail; |
| |
| case QIB_IB_CFG_LSTATE: /* set the IB link state */ |
| switch (val & 0xffff0000) { |
| case IB_LINKCMD_DOWN: |
| lcmd = QLOGIC_IB_IBCC_LINKCMD_DOWN; |
| ppd->cpspec->ibmalfusesnap = 1; |
| ppd->cpspec->ibmalfsnap = read_7322_creg32_port(ppd, |
| crp_errlink); |
| if (!ppd->cpspec->ibdeltainprog && |
| qib_compat_ddr_negotiate) { |
| ppd->cpspec->ibdeltainprog = 1; |
| ppd->cpspec->ibsymsnap = |
| read_7322_creg32_port(ppd, |
| crp_ibsymbolerr); |
| ppd->cpspec->iblnkerrsnap = |
| read_7322_creg32_port(ppd, |
| crp_iblinkerrrecov); |
| } |
| break; |
| |
| case IB_LINKCMD_ARMED: |
| lcmd = QLOGIC_IB_IBCC_LINKCMD_ARMED; |
| if (ppd->cpspec->ibmalfusesnap) { |
| ppd->cpspec->ibmalfusesnap = 0; |
| ppd->cpspec->ibmalfdelta += |
| read_7322_creg32_port(ppd, |
| crp_errlink) - |
| ppd->cpspec->ibmalfsnap; |
| } |
| break; |
| |
| case IB_LINKCMD_ACTIVE: |
| lcmd = QLOGIC_IB_IBCC_LINKCMD_ACTIVE; |
| break; |
| |
| default: |
| ret = -EINVAL; |
| qib_dev_err(dd, "bad linkcmd req 0x%x\n", val >> 16); |
| goto bail; |
| } |
| switch (val & 0xffff) { |
| case IB_LINKINITCMD_NOP: |
| licmd = 0; |
| break; |
| |
| case IB_LINKINITCMD_POLL: |
| licmd = QLOGIC_IB_IBCC_LINKINITCMD_POLL; |
| break; |
| |
| case IB_LINKINITCMD_SLEEP: |
| licmd = QLOGIC_IB_IBCC_LINKINITCMD_SLEEP; |
| break; |
| |
| case IB_LINKINITCMD_DISABLE: |
| licmd = QLOGIC_IB_IBCC_LINKINITCMD_DISABLE; |
| ppd->cpspec->chase_end = 0; |
| /* |
| * stop state chase counter and timer, if running. |
| * wait forpending timer, but don't clear .data (ppd)! |
| */ |
| if (ppd->cpspec->chase_timer.expires) { |
| del_timer_sync(&ppd->cpspec->chase_timer); |
| ppd->cpspec->chase_timer.expires = 0; |
| } |
| break; |
| |
| default: |
| ret = -EINVAL; |
| qib_dev_err(dd, "bad linkinitcmd req 0x%x\n", |
| val & 0xffff); |
| goto bail; |
| } |
| qib_set_ib_7322_lstate(ppd, lcmd, licmd); |
| goto bail; |
| |
| case QIB_IB_CFG_OP_VLS: |
| if (ppd->vls_operational != val) { |
| ppd->vls_operational = val; |
| set_vls(ppd); |
| } |
| goto bail; |
| |
| case QIB_IB_CFG_VL_HIGH_LIMIT: |
| qib_write_kreg_port(ppd, krp_highprio_limit, val); |
| goto bail; |
| |
| case QIB_IB_CFG_HRTBT: /* set Heartbeat off/enable/auto */ |
| if (val > 3) { |
| ret = -EINVAL; |
| goto bail; |
| } |
| lsb = IBA7322_IBC_HRTBT_LSB; |
| maskr = IBA7322_IBC_HRTBT_RMASK; /* OR of AUTO and ENB */ |
| break; |
| |
| case QIB_IB_CFG_PORT: |
| /* val is the port number of the switch we are connected to. */ |
| if (ppd->dd->cspec->r1) { |
| cancel_delayed_work(&ppd->cpspec->ipg_work); |
| ppd->cpspec->ipg_tries = 0; |
| } |
| goto bail; |
| |
| default: |
| ret = -EINVAL; |
| goto bail; |
| } |
| ppd->cpspec->ibcctrl_b &= ~(maskr << lsb); |
| ppd->cpspec->ibcctrl_b |= (((u64) val & maskr) << lsb); |
| qib_write_kreg_port(ppd, krp_ibcctrl_b, ppd->cpspec->ibcctrl_b); |
| qib_write_kreg(dd, kr_scratch, 0); |
| bail: |
| return ret; |
| } |
| |
| static int qib_7322_set_loopback(struct qib_pportdata *ppd, const char *what) |
| { |
| int ret = 0; |
| u64 val, ctrlb; |
| |
| /* only IBC loopback, may add serdes and xgxs loopbacks later */ |
| if (!strncmp(what, "ibc", 3)) { |
| ppd->cpspec->ibcctrl_a |= SYM_MASK(IBCCtrlA_0, |
| Loopback); |
| val = 0; /* disable heart beat, so link will come up */ |
| qib_devinfo(ppd->dd->pcidev, "Enabling IB%u:%u IBC loopback\n", |
| ppd->dd->unit, ppd->port); |
| } else if (!strncmp(what, "off", 3)) { |
| ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, |
| Loopback); |
| /* enable heart beat again */ |
| val = IBA7322_IBC_HRTBT_RMASK << IBA7322_IBC_HRTBT_LSB; |
| qib_devinfo(ppd->dd->pcidev, "Disabling IB%u:%u IBC loopback " |
| "(normal)\n", ppd->dd->unit, ppd->port); |
| } else |
| ret = -EINVAL; |
| if (!ret) { |
| qib_write_kreg_port(ppd, krp_ibcctrl_a, |
| ppd->cpspec->ibcctrl_a); |
| ctrlb = ppd->cpspec->ibcctrl_b & ~(IBA7322_IBC_HRTBT_MASK |
| << IBA7322_IBC_HRTBT_LSB); |
| ppd->cpspec->ibcctrl_b = ctrlb | val; |
| qib_write_kreg_port(ppd, krp_ibcctrl_b, |
| ppd->cpspec->ibcctrl_b); |
| qib_write_kreg(ppd->dd, kr_scratch, 0); |
| } |
| return ret; |
| } |
| |
| static void get_vl_weights(struct qib_pportdata *ppd, unsigned regno, |
| struct ib_vl_weight_elem *vl) |
| { |
| unsigned i; |
| |
| for (i = 0; i < 16; i++, regno++, vl++) { |
| u32 val = qib_read_kreg_port(ppd, regno); |
| |
| vl->vl = (val >> SYM_LSB(LowPriority0_0, VirtualLane)) & |
| SYM_RMASK(LowPriority0_0, VirtualLane); |
| vl->weight = (val >> SYM_LSB(LowPriority0_0, Weight)) & |
| SYM_RMASK(LowPriority0_0, Weight); |
| } |
| } |
| |
| static void set_vl_weights(struct qib_pportdata *ppd, unsigned regno, |
| struct ib_vl_weight_elem *vl) |
| { |
| unsigned i; |
| |
| for (i = 0; i < 16; i++, regno++, vl++) { |
| u64 val; |
| |
| val = ((vl->vl & SYM_RMASK(LowPriority0_0, VirtualLane)) << |
| SYM_LSB(LowPriority0_0, VirtualLane)) | |
| ((vl->weight & SYM_RMASK(LowPriority0_0, Weight)) << |
| SYM_LSB(LowPriority0_0, Weight)); |
| qib_write_kreg_port(ppd, regno, val); |
| } |
| if (!(ppd->p_sendctrl & SYM_MASK(SendCtrl_0, IBVLArbiterEn))) { |
| struct qib_devdata *dd = ppd->dd; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&dd->sendctrl_lock, flags); |
| ppd->p_sendctrl |= SYM_MASK(SendCtrl_0, IBVLArbiterEn); |
| qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl); |
| qib_write_kreg(dd, kr_scratch, 0); |
| spin_unlock_irqrestore(&dd->sendctrl_lock, flags); |
| } |
| } |
| |
| static int qib_7322_get_ib_table(struct qib_pportdata *ppd, int which, void *t) |
| { |
| switch (which) { |
| case QIB_IB_TBL_VL_HIGH_ARB: |
| get_vl_weights(ppd, krp_highprio_0, t); |
| break; |
| |
| case QIB_IB_TBL_VL_LOW_ARB: |
| get_vl_weights(ppd, krp_lowprio_0, t); |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static int qib_7322_set_ib_table(struct qib_pportdata *ppd, int which, void *t) |
| { |
| switch (which) { |
| case QIB_IB_TBL_VL_HIGH_ARB: |
| set_vl_weights(ppd, krp_highprio_0, t); |
| break; |
| |
| case QIB_IB_TBL_VL_LOW_ARB: |
| set_vl_weights(ppd, krp_lowprio_0, t); |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static void qib_update_7322_usrhead(struct qib_ctxtdata *rcd, u64 hd, |
| u32 updegr, u32 egrhd, u32 npkts) |
| { |
| /* |
| * Need to write timeout register before updating rcvhdrhead to ensure |
| * that the timer is enabled on reception of a packet. |
| */ |
| if (hd >> IBA7322_HDRHEAD_PKTINT_SHIFT) |
| adjust_rcv_timeout(rcd, npkts); |
| if (updegr) |
| qib_write_ureg(rcd->dd, ur_rcvegrindexhead, egrhd, rcd->ctxt); |
| mmiowb(); |
| qib_write_ureg(rcd->dd, ur_rcvhdrhead, hd, rcd->ctxt); |
| qib_write_ureg(rcd->dd, ur_rcvhdrhead, hd, rcd->ctxt); |
| mmiowb(); |
| } |
| |
| static u32 qib_7322_hdrqempty(struct qib_ctxtdata *rcd) |
| { |
| u32 head, tail; |
| |
| head = qib_read_ureg32(rcd->dd, ur_rcvhdrhead, rcd->ctxt); |
| if (rcd->rcvhdrtail_kvaddr) |
| tail = qib_get_rcvhdrtail(rcd); |
| else |
| tail = qib_read_ureg32(rcd->dd, ur_rcvhdrtail, rcd->ctxt); |
| return head == tail; |
| } |
| |
| #define RCVCTRL_COMMON_MODS (QIB_RCVCTRL_CTXT_ENB | \ |
| QIB_RCVCTRL_CTXT_DIS | \ |
| QIB_RCVCTRL_TIDFLOW_ENB | \ |
| QIB_RCVCTRL_TIDFLOW_DIS | \ |
| QIB_RCVCTRL_TAILUPD_ENB | \ |
| QIB_RCVCTRL_TAILUPD_DIS | \ |
| QIB_RCVCTRL_INTRAVAIL_ENB | \ |
| QIB_RCVCTRL_INTRAVAIL_DIS | \ |
| QIB_RCVCTRL_BP_ENB | \ |
| QIB_RCVCTRL_BP_DIS) |
| |
| #define RCVCTRL_PORT_MODS (QIB_RCVCTRL_CTXT_ENB | \ |
| QIB_RCVCTRL_CTXT_DIS | \ |
| QIB_RCVCTRL_PKEY_DIS | \ |
| QIB_RCVCTRL_PKEY_ENB) |
| |
| /* |
| * Modify the RCVCTRL register in chip-specific way. This |
| * is a function because bit positions and (future) register |
| * location is chip-specifc, but the needed operations are |
| * generic. <op> is a bit-mask because we often want to |
| * do multiple modifications. |
| */ |
| static void rcvctrl_7322_mod(struct qib_pportdata *ppd, unsigned int op, |
| int ctxt) |
| { |
| struct qib_devdata *dd = ppd->dd; |
| struct qib_ctxtdata *rcd; |
| u64 mask, val; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags); |
| |
| if (op & QIB_RCVCTRL_TIDFLOW_ENB) |
| dd->rcvctrl |= SYM_MASK(RcvCtrl, TidFlowEnable); |
| if (op & QIB_RCVCTRL_TIDFLOW_DIS) |
| dd->rcvctrl &= ~SYM_MASK(RcvCtrl, TidFlowEnable); |
| if (op & QIB_RCVCTRL_TAILUPD_ENB) |
| dd->rcvctrl |= SYM_MASK(RcvCtrl, TailUpd); |
| if (op & QIB_RCVCTRL_TAILUPD_DIS) |
| dd->rcvctrl &= ~SYM_MASK(RcvCtrl, TailUpd); |
| if (op & QIB_RCVCTRL_PKEY_ENB) |
| ppd->p_rcvctrl &= ~SYM_MASK(RcvCtrl_0, RcvPartitionKeyDisable); |
| if (op & QIB_RCVCTRL_PKEY_DIS) |
| ppd->p_rcvctrl |= SYM_MASK(RcvCtrl_0, RcvPartitionKeyDisable); |
| if (ctxt < 0) { |
| mask = (1ULL << dd->ctxtcnt) - 1; |
| rcd = NULL; |
| } else { |
| mask = (1ULL << ctxt); |
| rcd = dd->rcd[ctxt]; |
| } |
| if ((op & QIB_RCVCTRL_CTXT_ENB) && rcd) { |
| ppd->p_rcvctrl |= |
| (mask << SYM_LSB(RcvCtrl_0, ContextEnableKernel)); |
| if (!(dd->flags & QIB_NODMA_RTAIL)) { |
| op |= QIB_RCVCTRL_TAILUPD_ENB; /* need reg write */ |
| dd->rcvctrl |= SYM_MASK(RcvCtrl, TailUpd); |
| } |
| /* Write these registers before the context is enabled. */ |
| qib_write_kreg_ctxt(dd, krc_rcvhdrtailaddr, ctxt, |
| rcd->rcvhdrqtailaddr_phys); |
| qib_write_kreg_ctxt(dd, krc_rcvhdraddr, ctxt, |
| rcd->rcvhdrq_phys); |
| rcd->seq_cnt = 1; |
| } |
| if (op & QIB_RCVCTRL_CTXT_DIS) |
| ppd->p_rcvctrl &= |
| ~(mask << SYM_LSB(RcvCtrl_0, ContextEnableKernel)); |
| if (op & QIB_RCVCTRL_BP_ENB) |
| dd->rcvctrl |= mask << SYM_LSB(RcvCtrl, dontDropRHQFull); |
| if (op & QIB_RCVCTRL_BP_DIS) |
| dd->rcvctrl &= ~(mask << SYM_LSB(RcvCtrl, dontDropRHQFull)); |
| if (op & QIB_RCVCTRL_INTRAVAIL_ENB) |
| dd->rcvctrl |= (mask << SYM_LSB(RcvCtrl, IntrAvail)); |
| if (op & QIB_RCVCTRL_INTRAVAIL_DIS) |
| dd->rcvctrl &= ~(mask << SYM_LSB(RcvCtrl, IntrAvail)); |
| /* |
| * Decide which registers to write depending on the ops enabled. |
| * Special case is "flush" (no bits set at all) |
| * which needs to write both. |
| */ |
| if (op == 0 || (op & RCVCTRL_COMMON_MODS)) |
| qib_write_kreg(dd, kr_rcvctrl, dd->rcvctrl); |
| if (op == 0 || (op & RCVCTRL_PORT_MODS)) |
| qib_write_kreg_port(ppd, krp_rcvctrl, ppd->p_rcvctrl); |
| if ((op & QIB_RCVCTRL_CTXT_ENB) && dd->rcd[ctxt]) { |
| /* |
| * Init the context registers also; if we were |
| * disabled, tail and head should both be zero |
| * already from the enable, but since we don't |
| * know, we have to do it explicitly. |
| */ |
| val = qib_read_ureg32(dd, ur_rcvegrindextail, ctxt); |
| qib_write_ureg(dd, ur_rcvegrindexhead, val, ctxt); |
| |
| /* be sure enabling write seen; hd/tl should be 0 */ |
| (void) qib_read_kreg32(dd, kr_scratch); |
| val = qib_read_ureg32(dd, ur_rcvhdrtail, ctxt); |
| dd->rcd[ctxt]->head = val; |
| /* If kctxt, interrupt on next receive. */ |
| if (ctxt < dd->first_user_ctxt) |
| val |= dd->rhdrhead_intr_off; |
| qib_write_ureg(dd, ur_rcvhdrhead, val, ctxt); |
| } else if ((op & QIB_RCVCTRL_INTRAVAIL_ENB) && |
| dd->rcd[ctxt] && dd->rhdrhead_intr_off) { |
| /* arm rcv interrupt */ |
| val = dd->rcd[ctxt]->head | dd->rhdrhead_intr_off; |
| qib_write_ureg(dd, ur_rcvhdrhead, val, ctxt); |
| } |
| if (op & QIB_RCVCTRL_CTXT_DIS) { |
| unsigned f; |
| |
| /* Now that the context is disabled, clear these registers. */ |
| if (ctxt >= 0) { |
| qib_write_kreg_ctxt(dd, krc_rcvhdrtailaddr, ctxt, 0); |
| qib_write_kreg_ctxt(dd, krc_rcvhdraddr, ctxt, 0); |
| for (f = 0; f < NUM_TIDFLOWS_CTXT; f++) |
| qib_write_ureg(dd, ur_rcvflowtable + f, |
| TIDFLOW_ERRBITS, ctxt); |
| } else { |
| unsigned i; |
| |
| for (i = 0; i < dd->cfgctxts; i++) { |
| qib_write_kreg_ctxt(dd, krc_rcvhdrtailaddr, |
| i, 0); |
| qib_write_kreg_ctxt(dd, krc_rcvhdraddr, i, 0); |
| for (f = 0; f < NUM_TIDFLOWS_CTXT; f++) |
| qib_write_ureg(dd, ur_rcvflowtable + f, |
| TIDFLOW_ERRBITS, i); |
| } |
| } |
| } |
| spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags); |
| } |
| |
| /* |
| * Modify the SENDCTRL register in chip-specific way. This |
| * is a function where there are multiple such registers with |
| * slightly different layouts. |
| * The chip doesn't allow back-to-back sendctrl writes, so write |
| * the scratch register after writing sendctrl. |
| * |
| * Which register is written depends on the operation. |
| * Most operate on the common register, while |
| * SEND_ENB and SEND_DIS operate on the per-port ones. |
| * SEND_ENB is included in common because it can change SPCL_TRIG |
| */ |
| #define SENDCTRL_COMMON_MODS (\ |
| QIB_SENDCTRL_CLEAR | \ |
| QIB_SENDCTRL_AVAIL_DIS | \ |
| QIB_SENDCTRL_AVAIL_ENB | \ |
| QIB_SENDCTRL_AVAIL_BLIP | \ |
| QIB_SENDCTRL_DISARM | \ |
| QIB_SENDCTRL_DISARM_ALL | \ |
| QIB_SENDCTRL_SEND_ENB) |
| |
| #define SENDCTRL_PORT_MODS (\ |
| QIB_SENDCTRL_CLEAR | \ |
| QIB_SENDCTRL_SEND_ENB | \ |
| QIB_SENDCTRL_SEND_DIS | \ |
| QIB_SENDCTRL_FLUSH) |
| |
| static void sendctrl_7322_mod(struct qib_pportdata *ppd, u32 op) |
| { |
| struct qib_devdata *dd = ppd->dd; |
| u64 tmp_dd_sendctrl; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&dd->sendctrl_lock, flags); |
| |
| /* First the dd ones that are "sticky", saved in shadow */ |
| if (op & QIB_SENDCTRL_CLEAR) |
| dd->sendctrl = 0; |
| if (op & QIB_SENDCTRL_AVAIL_DIS) |
| dd->sendctrl &= ~SYM_MASK(SendCtrl, SendBufAvailUpd); |
| else if (op & QIB_SENDCTRL_AVAIL_ENB) { |
| dd->sendctrl |= SYM_MASK(SendCtrl, SendBufAvailUpd); |
| if (dd->flags & QIB_USE_SPCL_TRIG) |
| dd->sendctrl |= SYM_MASK(SendCtrl, SpecialTriggerEn); |
| } |
| |
| /* Then the ppd ones that are "sticky", saved in shadow */ |
| if (op & QIB_SENDCTRL_SEND_DIS) |
| ppd->p_sendctrl &= ~SYM_MASK(SendCtrl_0, SendEnable); |
| else if (op & QIB_SENDCTRL_SEND_ENB) |
| ppd->p_sendctrl |= SYM_MASK(SendCtrl_0, SendEnable); |
| |
| if (op & QIB_SENDCTRL_DISARM_ALL) { |
| u32 i, last; |
| |
| tmp_dd_sendctrl = dd->sendctrl; |
| last = dd->piobcnt2k + dd->piobcnt4k + NUM_VL15_BUFS; |
| /* |
| * Disarm any buffers that are not yet launched, |
| * disabling updates until done. |
| */ |
| tmp_dd_sendctrl &= ~SYM_MASK(SendCtrl, SendBufAvailUpd); |
| for (i = 0; i < last; i++) { |
| qib_write_kreg(dd, kr_sendctrl, |
| tmp_dd_sendctrl | |
| SYM_MASK(SendCtrl, Disarm) | i); |
| qib_write_kreg(dd, kr_scratch, 0); |
| } |
| } |
| |
| if (op & QIB_SENDCTRL_FLUSH) { |
| u64 tmp_ppd_sendctrl = ppd->p_sendctrl; |
| |
| /* |
| * Now drain all the fifos. The Abort bit should never be |
| * needed, so for now, at least, we don't use it. |
| */ |
| tmp_ppd_sendctrl |= |
| SYM_MASK(SendCtrl_0, TxeDrainRmFifo) | |
| SYM_MASK(SendCtrl_0, TxeDrainLaFifo) | |
| SYM_MASK(SendCtrl_0, TxeBypassIbc); |
| qib_write_kreg_port(ppd, krp_sendctrl, tmp_ppd_sendctrl); |
| qib_write_kreg(dd, kr_scratch, 0); |
| } |
| |
| tmp_dd_sendctrl = dd->sendctrl; |
| |
| if (op & QIB_SENDCTRL_DISARM) |
| tmp_dd_sendctrl |= SYM_MASK(SendCtrl, Disarm) | |
| ((op & QIB_7322_SendCtrl_DisarmSendBuf_RMASK) << |
| SYM_LSB(SendCtrl, DisarmSendBuf)); |
| if ((op & QIB_SENDCTRL_AVAIL_BLIP) && |
| (dd->sendctrl & SYM_MASK(SendCtrl, SendBufAvailUpd))) |
| tmp_dd_sendctrl &= ~SYM_MASK(SendCtrl, SendBufAvailUpd); |
| |
| if (op == 0 || (op & SENDCTRL_COMMON_MODS)) { |
| qib_write_kreg(dd, kr_sendctrl, tmp_dd_sendctrl); |
| qib_write_kreg(dd, kr_scratch, 0); |
| } |
| |
| if (op == 0 || (op & SENDCTRL_PORT_MODS)) { |
| qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl); |
| qib_write_kreg(dd, kr_scratch, 0); |
| } |
| |
| if (op & QIB_SENDCTRL_AVAIL_BLIP) { |
| qib_write_kreg(dd, kr_sendctrl, dd->sendctrl); |
| qib_write_kreg(dd, kr_scratch, 0); |
| } |
| |
| spin_unlock_irqrestore(&dd->sendctrl_lock, flags); |
| |
| if (op & QIB_SENDCTRL_FLUSH) { |
| u32 v; |
| /* |
| * ensure writes have hit chip, then do a few |
| * more reads, to allow DMA of pioavail registers |
| * to occur, so in-memory copy is in sync with |
| * the chip. Not always safe to sleep. |
| */ |
| v = qib_read_kreg32(dd, kr_scratch); |
| qib_write_kreg(dd, kr_scratch, v); |
| v = qib_read_kreg32(dd, kr_scratch); |
| qib_write_kreg(dd, kr_scratch, v); |
| qib_read_kreg32(dd, kr_scratch); |
| } |
| } |
| |
| #define _PORT_VIRT_FLAG 0x8000U /* "virtual", need adjustments */ |
| #define _PORT_64BIT_FLAG 0x10000U /* not "virtual", but 64bit */ |
| #define _PORT_CNTR_IDXMASK 0x7fffU /* mask off flags above */ |
| |
| /** |
| * qib_portcntr_7322 - read a per-port chip counter |
| * @ppd: the qlogic_ib pport |
| * @creg: the counter to read (not a chip offset) |
| */ |
| static u64 qib_portcntr_7322(struct qib_pportdata *ppd, u32 reg) |
| { |
| struct qib_devdata *dd = ppd->dd; |
| u64 ret = 0ULL; |
| u16 creg; |
| /* 0xffff for unimplemented or synthesized counters */ |
| static const u32 xlator[] = { |
| [QIBPORTCNTR_PKTSEND] = crp_pktsend | _PORT_64BIT_FLAG, |
| [QIBPORTCNTR_WORDSEND] = crp_wordsend | _PORT_64BIT_FLAG, |
| [QIBPORTCNTR_PSXMITDATA] = crp_psxmitdatacount, |
| [QIBPORTCNTR_PSXMITPKTS] = crp_psxmitpktscount, |
| [QIBPORTCNTR_PSXMITWAIT] = crp_psxmitwaitcount, |
| [QIBPORTCNTR_SENDSTALL] = crp_sendstall, |
| [QIBPORTCNTR_PKTRCV] = crp_pktrcv | _PORT_64BIT_FLAG, |
| [QIBPORTCNTR_PSRCVDATA] = crp_psrcvdatacount, |
| [QIBPORTCNTR_PSRCVPKTS] = crp_psrcvpktscount, |
| [QIBPORTCNTR_RCVEBP] = crp_rcvebp, |
| [QIBPORTCNTR_RCVOVFL] = crp_rcvovfl, |
| [QIBPORTCNTR_WORDRCV] = crp_wordrcv | _PORT_64BIT_FLAG, |
| [QIBPORTCNTR_RXDROPPKT] = 0xffff, /* not needed for 7322 */ |
| [QIBPORTCNTR_RXLOCALPHYERR] = crp_rxotherlocalphyerr, |
| [QIBPORTCNTR_RXVLERR] = crp_rxvlerr, |
| [QIBPORTCNTR_ERRICRC] = crp_erricrc, |
| [QIBPORTCNTR_ERRVCRC] = crp_errvcrc, |
| [QIBPORTCNTR_ERRLPCRC] = crp_errlpcrc, |
| [QIBPORTCNTR_BADFORMAT] = crp_badformat, |
| [QIBPORTCNTR_ERR_RLEN] = crp_err_rlen, |
| [QIBPORTCNTR_IBSYMBOLERR] = crp_ibsymbolerr, |
| [QIBPORTCNTR_INVALIDRLEN] = crp_invalidrlen, |
| [QIBPORTCNTR_UNSUPVL] = crp_txunsupvl, |
| [QIBPORTCNTR_EXCESSBUFOVFL] = crp_excessbufferovfl, |
| [QIBPORTCNTR_ERRLINK] = crp_errlink, |
| [QIBPORTCNTR_IBLINKDOWN] = crp_iblinkdown, |
| [QIBPORTCNTR_IBLINKERRRECOV] = crp_iblinkerrrecov, |
| [QIBPORTCNTR_LLI] = crp_locallinkintegrityerr, |
| [QIBPORTCNTR_VL15PKTDROP] = crp_vl15droppedpkt, |
| [QIBPORTCNTR_ERRPKEY] = crp_errpkey, |
| /* |
| * the next 3 aren't really counters, but were implemented |
| * as counters in older chips, so still get accessed as |
| * though they were counters from this code. |
| */ |
| [QIBPORTCNTR_PSINTERVAL] = krp_psinterval, |
| [QIBPORTCNTR_PSSTART] = krp_psstart, |
| [QIBPORTCNTR_PSSTAT] = krp_psstat, |
| /* pseudo-counter, summed for all ports */ |
| [QIBPORTCNTR_KHDROVFL] = 0xffff, |
| }; |
| |
| if (reg >= ARRAY_SIZE(xlator)) { |
| qib_devinfo(ppd->dd->pcidev, |
| "Unimplemented portcounter %u\n", reg); |
| goto done; |
| } |
| creg = xlator[reg] & _PORT_CNTR_IDXMASK; |
| |
| /* handle non-counters and special cases first */ |
| if (reg == QIBPORTCNTR_KHDROVFL) { |
| int i; |
| |
| /* sum over all kernel contexts (skip if mini_init) */ |
| for (i = 0; dd->rcd && i < dd->first_user_ctxt; i++) { |
| struct qib_ctxtdata *rcd = dd->rcd[i]; |
| |
| if (!rcd || rcd->ppd != ppd) |
| continue; |
| ret += read_7322_creg32(dd, cr_base_egrovfl + i); |
| } |
| goto done; |
| } else if (reg == QIBPORTCNTR_RXDROPPKT) { |
| /* |
| * Used as part of the synthesis of port_rcv_errors |
| * in the verbs code for IBTA counters. Not needed for 7322, |
| * because all the errors are already counted by other cntrs. |
| */ |
| goto done; |
| } else if (reg == QIBPORTCNTR_PSINTERVAL || |
| reg == QIBPORTCNTR_PSSTART || reg == QIBPORTCNTR_PSSTAT) { |
| /* were counters in older chips, now per-port kernel regs */ |
| ret = qib_read_kreg_port(ppd, creg); |
| goto done; |
| } |
| |
| /* |
| * Only fast increment counters are 64 bits; use 32 bit reads to |
| * avoid two independent reads when on Opteron. |
| */ |
| if (xlator[reg] & _PORT_64BIT_FLAG) |
| ret = read_7322_creg_port(ppd, creg); |
| else |
| ret = read_7322_creg32_port(ppd, creg); |
| if (creg == crp_ibsymbolerr) { |
| if (ppd->cpspec->ibdeltainprog) |
| ret -= ret - ppd->cpspec->ibsymsnap; |
| ret -= ppd->cpspec->ibsymdelta; |
| } else if (creg == crp_iblinkerrrecov) { |
| if (ppd->cpspec->ibdeltainprog) |
| ret -= ret - ppd->cpspec->iblnkerrsnap; |
| ret -= ppd->cpspec->iblnkerrdelta; |
| } else if (creg == crp_errlink) |
| ret -= ppd->cpspec->ibmalfdelta; |
| else if (creg == crp_iblinkdown) |
| ret += ppd->cpspec->iblnkdowndelta; |
| done: |
| return ret; |
| } |
| |
| /* |
| * Device counter names (not port-specific), one line per stat, |
| * single string. Used by utilities like ipathstats to print the stats |
| * in a way which works for different versions of drivers, without changing |
| * the utility. Names need to be 12 chars or less (w/o newline), for proper |
| * display by utility. |
| * Non-error counters are first. |
| * Start of "error" conters is indicated by a leading "E " on the first |
| * "error" counter, and doesn't count in label length. |
| * The EgrOvfl list needs to be last so we truncate them at the configured |
| * context count for the device. |
| * cntr7322indices contains the corresponding register indices. |
| */ |
| static const char cntr7322names[] = |
| "Interrupts\n" |
| "HostBusStall\n" |
| "E RxTIDFull\n" |
| "RxTIDInvalid\n" |
| "RxTIDFloDrop\n" /* 7322 only */ |
| "Ctxt0EgrOvfl\n" |
| "Ctxt1EgrOvfl\n" |
| "Ctxt2EgrOvfl\n" |
| "Ctxt3EgrOvfl\n" |
| "Ctxt4EgrOvfl\n" |
| "Ctxt5EgrOvfl\n" |
| "Ctxt6EgrOvfl\n" |
| "Ctxt7EgrOvfl\n" |
| "Ctxt8EgrOvfl\n" |
| "Ctxt9EgrOvfl\n" |
| "Ctx10EgrOvfl\n" |
| "Ctx11EgrOvfl\n" |
| "Ctx12EgrOvfl\n" |
| "Ctx13EgrOvfl\n" |
| "Ctx14EgrOvfl\n" |
| "Ctx15EgrOvfl\n" |
| "Ctx16EgrOvfl\n" |
| "Ctx17EgrOvfl\n" |
| ; |
| |
| static const u32 cntr7322indices[] = { |
| cr_lbint | _PORT_64BIT_FLAG, |
| cr_lbstall | _PORT_64BIT_FLAG, |
| cr_tidfull, |
| cr_tidinvalid, |
| cr_rxtidflowdrop, |
| cr_base_egrovfl + 0, |
| cr_base_egrovfl + 1, |
| cr_base_egrovfl + 2, |
| cr_base_egrovfl + 3, |
| cr_base_egrovfl + 4, |
| cr_base_egrovfl + 5, |
| cr_base_egrovfl + 6, |
| cr_base_egrovfl + 7, |
| cr_base_egrovfl + 8, |
| cr_base_egrovfl + 9, |
| cr_base_egrovfl + 10, |
| cr_base_egrovfl + 11, |
| cr_base_egrovfl + 12, |
| cr_base_egrovfl + 13, |
| cr_base_egrovfl + 14, |
| cr_base_egrovfl + 15, |
| cr_base_egrovfl + 16, |
| cr_base_egrovfl + 17, |
| }; |
| |
| /* |
| * same as cntr7322names and cntr7322indices, but for port-specific counters. |
| * portcntr7322indices is somewhat complicated by some registers needing |
| * adjustments of various kinds, and those are ORed with _PORT_VIRT_FLAG |
| */ |
| static const char portcntr7322names[] = |
| "TxPkt\n" |
| "TxFlowPkt\n" |
| "TxWords\n" |
| "RxPkt\n" |
| "RxFlowPkt\n" |
| "RxWords\n" |
| "TxFlowStall\n" |
| "TxDmaDesc\n" /* 7220 and 7322-only */ |
| "E RxDlidFltr\n" /* 7220 and 7322-only */ |
| "IBStatusChng\n" |
| "IBLinkDown\n" |
| "IBLnkRecov\n" |
| "IBRxLinkErr\n" |
| "IBSymbolErr\n" |
| "RxLLIErr\n" |
| "RxBadFormat\n" |
| "RxBadLen\n" |
| "RxBufOvrfl\n" |
| "RxEBP\n" |
| "RxFlowCtlErr\n" |
| "RxICRCerr\n" |
| "RxLPCRCerr\n" |
| "RxVCRCerr\n" |
| "RxInvalLen\n" |
| "RxInvalPKey\n" |
| "RxPktDropped\n" |
| "TxBadLength\n" |
| "TxDropped\n" |
| "TxInvalLen\n" |
| "TxUnderrun\n" |
| "TxUnsupVL\n" |
| "RxLclPhyErr\n" /* 7220 and 7322-only from here down */ |
| "RxVL15Drop\n" |
| "RxVlErr\n" |
| "XcessBufOvfl\n" |
| "RxQPBadCtxt\n" /* 7322-only from here down */ |
| "TXBadHeader\n" |
| ; |
| |
| static const u32 portcntr7322indices[] = { |
| QIBPORTCNTR_PKTSEND | _PORT_VIRT_FLAG, |
| crp_pktsendflow, |
| QIBPORTCNTR_WORDSEND | _PORT_VIRT_FLAG, |
| QIBPORTCNTR_PKTRCV | _PORT_VIRT_FLAG, |
| crp_pktrcvflowctrl, |
| QIBPORTCNTR_WORDRCV | _PORT_VIRT_FLAG, |
| QIBPORTCNTR_SENDSTALL | _PORT_VIRT_FLAG, |
| crp_txsdmadesc | _PORT_64BIT_FLAG, |
| crp_rxdlidfltr, |
| crp_ibstatuschange, |
| QIBPORTCNTR_IBLINKDOWN | _PORT_VIRT_FLAG, |
| QIBPORTCNTR_IBLINKERRRECOV | _PORT_VIRT_FLAG, |
| QIBPORTCNTR_ERRLINK | _PORT_VIRT_FLAG, |
| QIBPORTCNTR_IBSYMBOLERR | _PORT_VIRT_FLAG, |
| QIBPORTCNTR_LLI | _PORT_VIRT_FLAG, |
| QIBPORTCNTR_BADFORMAT | _PORT_VIRT_FLAG, |
| QIBPORTCNTR_ERR_RLEN | _PORT_VIRT_FLAG, |
| QIBPORTCNTR_RCVOVFL | _PORT_VIRT_FLAG, |
| QIBPORTCNTR_RCVEBP | _PORT_VIRT_FLAG, |
| crp_rcvflowctrlviol, |
| QIBPORTCNTR_ERRICRC | _PORT_VIRT_FLAG, |
| QIBPORTCNTR_ERRLPCRC | _PORT_VIRT_FLAG, |
| QIBPORTCNTR_ERRVCRC | _PORT_VIRT_FLAG, |
| QIBPORTCNTR_INVALIDRLEN | _PORT_VIRT_FLAG, |
| QIBPORTCNTR_ERRPKEY | _PORT_VIRT_FLAG, |
| QIBPORTCNTR_RXDROPPKT | _PORT_VIRT_FLAG, |
| crp_txminmaxlenerr, |
| crp_txdroppedpkt, |
| crp_txlenerr, |
| crp_txunderrun, |
| crp_txunsupvl, |
| QIBPORTCNTR_RXLOCALPHYERR | _PORT_VIRT_FLAG, |
| QIBPORTCNTR_VL15PKTDROP | _PORT_VIRT_FLAG, |
| QIBPORTCNTR_RXVLERR | _PORT_VIRT_FLAG, |
| QIBPORTCNTR_EXCESSBUFOVFL | _PORT_VIRT_FLAG, |
| crp_rxqpinvalidctxt, |
| crp_txhdrerr, |
| }; |
| |
| /* do all the setup to make the counter reads efficient later */ |
| static void init_7322_cntrnames(struct qib_devdata *dd) |
| { |
| int i, j = 0; |
| char *s; |
| |
| for (i = 0, s = (char *)cntr7322names; s && j <= dd->cfgctxts; |
| i++) { |
| /* we always have at least one counter before the egrovfl */ |
| if (!j && !strncmp("Ctxt0EgrOvfl", s + 1, 12)) |
| j = 1; |
| s = strchr(s + 1, '\n'); |
| if (s && j) |
| j++; |
| } |
| dd->cspec->ncntrs = i; |
| if (!s) |
| /* full list; size is without terminating null */ |
| dd->cspec->cntrnamelen = sizeof(cntr7322names) - 1; |
| else |
| dd->cspec->cntrnamelen = 1 + s - cntr7322names; |
| dd->cspec->cntrs = kmalloc(dd->cspec->ncntrs |
| * sizeof(u64), GFP_KERNEL); |
| if (!dd->cspec->cntrs) |
| qib_dev_err(dd, "Failed allocation for counters\n"); |
| |
| for (i = 0, s = (char *)portcntr7322names; s; i++) |
| s = strchr(s + 1, '\n'); |
| dd->cspec->nportcntrs = i - 1; |
| dd->cspec->portcntrnamelen = sizeof(portcntr7322names) - 1; |
| for (i = 0; i < dd->num_pports; ++i) { |
| dd->pport[i].cpspec->portcntrs = kmalloc(dd->cspec->nportcntrs |
| * sizeof(u64), GFP_KERNEL); |
| if (!dd->pport[i].cpspec->portcntrs) |
| qib_dev_err(dd, "Failed allocation for" |
| " portcounters\n"); |
| } |
| } |
| |
| static u32 qib_read_7322cntrs(struct qib_devdata *dd, loff_t pos, char **namep, |
| u64 **cntrp) |
| { |
| u32 ret; |
| |
| if (namep) { |
| ret = dd->cspec->cntrnamelen; |
| if (pos >= ret) |
| ret = 0; /* final read after getting everything */ |
| else |
| *namep = (char *) cntr7322names; |
| } else { |
| u64 *cntr = dd->cspec->cntrs; |
| int i; |
| |
| ret = dd->cspec->ncntrs * sizeof(u64); |
| if (!cntr || pos >= ret) { |
| /* everything read, or couldn't get memory */ |
| ret = 0; |
| goto done; |
| } |
| *cntrp = cntr; |
| for (i = 0; i < dd->cspec->ncntrs; i++) |
| if (cntr7322indices[i] & _PORT_64BIT_FLAG) |
| *cntr++ = read_7322_creg(dd, |
| cntr7322indices[i] & |
| _PORT_CNTR_IDXMASK); |
| else |
| *cntr++ = read_7322_creg32(dd, |
| cntr7322indices[i]); |
| } |
| done: |
| return ret; |
| } |
| |
| static u32 qib_read_7322portcntrs(struct qib_devdata *dd, loff_t pos, u32 port, |
| char **namep, u64 **cntrp) |
| { |
| u32 ret; |
| |
| if (namep) { |
| ret = dd->cspec->portcntrnamelen; |
| if (pos >= ret) |
| ret = 0; /* final read after getting everything */ |
| else |
| *namep = (char *)portcntr7322names; |
| } else { |
| struct qib_pportdata *ppd = &dd->pport[port]; |
| u64 *cntr = ppd->cpspec->portcntrs; |
| int i; |
| |
| ret = dd->cspec->nportcntrs * sizeof(u64); |
| if (!cntr || pos >= ret) { |
| /* everything read, or couldn't get memory */ |
| ret = 0; |
| goto done; |
| } |
| *cntrp = cntr; |
| for (i = 0; i < dd->cspec->nportcntrs; i++) { |
| if (portcntr7322indices[i] & _PORT_VIRT_FLAG) |
| *cntr++ = qib_portcntr_7322(ppd, |
| portcntr7322indices[i] & |
| _PORT_CNTR_IDXMASK); |
| else if (portcntr7322indices[i] & _PORT_64BIT_FLAG) |
| *cntr++ = read_7322_creg_port(ppd, |
| portcntr7322indices[i] & |
| _PORT_CNTR_IDXMASK); |
| else |
| *cntr++ = read_7322_creg32_port(ppd, |
| portcntr7322indices[i]); |
| } |
| } |
| done: |
| return ret; |
| } |
| |
| /** |
| * qib_get_7322_faststats - get word counters from chip before they overflow |
| * @opaque - contains a pointer to the qlogic_ib device qib_devdata |
| * |
| * VESTIGIAL IBA7322 has no "small fast counters", so the only |
| * real purpose of this function is to maintain the notion of |
| * "active time", which in turn is only logged into the eeprom, |
| * which we don;t have, yet, for 7322-based boards. |
| * |
| * called from add_timer |
| */ |
| static void qib_get_7322_faststats(unsigned long opaque) |
| { |
| struct qib_devdata *dd = (struct qib_devdata *) opaque; |
| struct qib_pportdata *ppd; |
| unsigned long flags; |
| u64 traffic_wds; |
| int pidx; |
| |
| for (pidx = 0; pidx < dd->num_pports; ++pidx) { |
| ppd = dd->pport + pidx; |
| |
| /* |
| * If port isn't enabled or not operational ports, or |
| * diags is running (can cause memory diags to fail) |
| * skip this port this time. |
| */ |
| if (!ppd->link_speed_supported || !(dd->flags & QIB_INITTED) |
| || dd->diag_client) |
| continue; |
| |
| /* |
| * Maintain an activity timer, based on traffic |
| * exceeding a threshold, so we need to check the word-counts |
| * even if they are 64-bit. |
| */ |
| traffic_wds = qib_portcntr_7322(ppd, QIBPORTCNTR_WORDRCV) + |
| qib_portcntr_7322(ppd, QIBPORTCNTR_WORDSEND); |
| spin_lock_irqsave(&ppd->dd->eep_st_lock, flags); |
| traffic_wds -= ppd->dd->traffic_wds; |
| ppd->dd->traffic_wds += traffic_wds; |
| if (traffic_wds >= QIB_TRAFFIC_ACTIVE_THRESHOLD) |
| atomic_add(ACTIVITY_TIMER, &ppd->dd->active_time); |
| spin_unlock_irqrestore(&ppd->dd->eep_st_lock, flags); |
| if (ppd->cpspec->qdr_dfe_on && (ppd->link_speed_active & |
| QIB_IB_QDR) && |
| (ppd->lflags & (QIBL_LINKINIT | QIBL_LINKARMED | |
| QIBL_LINKACTIVE)) && |
| ppd->cpspec->qdr_dfe_time && |
| time_after64(get_jiffies_64(), ppd->cpspec->qdr_dfe_time)) { |
| ppd->cpspec->qdr_dfe_on = 0; |
| |
| qib_write_kreg_port(ppd, krp_static_adapt_dis(2), |
| ppd->dd->cspec->r1 ? |
| QDR_STATIC_ADAPT_INIT_R1 : |
| QDR_STATIC_ADAPT_INIT); |
| force_h1(ppd); |
| } |
| } |
| mod_timer(&dd->stats_timer, jiffies + HZ * ACTIVITY_TIMER); |
| } |
| |
| /* |
| * If we were using MSIx, try to fallback to INTx. |
| */ |
| static int qib_7322_intr_fallback(struct qib_devdata *dd) |
| { |
| if (!dd->cspec->num_msix_entries) |
| return 0; /* already using INTx */ |
| |
| qib_devinfo(dd->pcidev, "MSIx interrupt not detected," |
| " trying INTx interrupts\n"); |
| qib_7322_nomsix(dd); |
| qib_enable_intx(dd->pcidev); |
| qib_setup_7322_interrupt(dd, 0); |
| return 1; |
| } |
| |
| /* |
| * Reset the XGXS (between serdes and IBC). Slightly less intrusive |
| * than resetting the IBC or external link state, and useful in some |
| * cases to cause some retraining. To do this right, we reset IBC |
| * as well, then return to previous state (which may be still in reset) |
| * NOTE: some callers of this "know" this writes the current value |
| * of cpspec->ibcctrl_a as part of it's operation, so if that changes, |
| * check all callers. |
| */ |
| static void qib_7322_mini_pcs_reset(struct qib_pportdata *ppd) |
| { |
| u64 val; |
| struct qib_devdata *dd = ppd->dd; |
| const u64 reset_bits = SYM_MASK(IBPCSConfig_0, xcv_rreset) | |
| SYM_MASK(IBPCSConfig_0, xcv_treset) | |
| SYM_MASK(IBPCSConfig_0, tx_rx_reset); |
| |
| val = qib_read_kreg_port(ppd, krp_ib_pcsconfig); |
| qib_write_kreg(dd, kr_hwerrmask, |
| dd->cspec->hwerrmask & ~HWE_MASK(statusValidNoEop)); |
| qib_write_kreg_port(ppd, krp_ibcctrl_a, |
| ppd->cpspec->ibcctrl_a & |
| ~SYM_MASK(IBCCtrlA_0, IBLinkEn)); |
| |
| qib_write_kreg_port(ppd, krp_ib_pcsconfig, val | reset_bits); |
| qib_read_kreg32(dd, kr_scratch); |
| qib_write_kreg_port(ppd, krp_ib_pcsconfig, val & ~reset_bits); |
| qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a); |
| qib_write_kreg(dd, kr_scratch, 0ULL); |
| qib_write_kreg(dd, kr_hwerrclear, |
| SYM_MASK(HwErrClear, statusValidNoEopClear)); |
| qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask); |
| } |
| |
| /* |
| * This code for non-IBTA-compliant IB speed negotiation is only known to |
| * work for the SDR to DDR transition, and only between an HCA and a switch |
| * with recent firmware. It is based on observed heuristics, rather than |
| * actual knowledge of the non-compliant speed negotiation. |
| * It has a number of hard-coded fields, since the hope is to rewrite this |
| * when a spec is available on how the negoation is intended to work. |
| */ |
| static void autoneg_7322_sendpkt(struct qib_pportdata *ppd, u32 *hdr, |
| u32 dcnt, u32 *data) |
| { |
| int i; |
| u64 pbc; |
| u32 __iomem *piobuf; |
| u32 pnum, control, len; |
| struct qib_devdata *dd = ppd->dd; |
| |
| i = 0; |
| len = 7 + dcnt + 1; /* 7 dword header, dword data, icrc */ |
| control = qib_7322_setpbc_control(ppd, len, 0, 15); |
| pbc = ((u64) control << 32) | len; |
| while (!(piobuf = qib_7322_getsendbuf(ppd, pbc, &pnum))) { |
| if (i++ > 15) |
| return; |
| udelay(2); |
| } |
| /* disable header check on this packet, since it can't be valid */ |
| dd->f_txchk_change(dd, pnum, 1, TXCHK_CHG_TYPE_DIS1, NULL); |
| writeq(pbc, piobuf); |
| qib_flush_wc(); |
| qib_pio_copy(piobuf + 2, hdr, 7); |
| qib_pio_copy(piobuf + 9, data, dcnt); |
| if (dd->flags & QIB_USE_SPCL_TRIG) { |
| u32 spcl_off = (pnum >= dd->piobcnt2k) ? 2047 : 1023; |
| |
| qib_flush_wc(); |
| __raw_writel(0xaebecede, piobuf + spcl_off); |
| } |
| qib_flush_wc(); |
| qib_sendbuf_done(dd, pnum); |
| /* and re-enable hdr check */ |
| dd->f_txchk_change(dd, pnum, 1, TXCHK_CHG_TYPE_ENAB1, NULL); |
| } |
| |
| /* |
| * _start packet gets sent twice at start, _done gets sent twice at end |
| */ |
| static void qib_autoneg_7322_send(struct qib_pportdata *ppd, int which) |
| { |
| struct qib_devdata *dd = ppd->dd; |
| static u32 swapped; |
| u32 dw, i, hcnt, dcnt, *data; |
| static u32 hdr[7] = { 0xf002ffff, 0x48ffff, 0x6400abba }; |
| static u32 madpayload_start[0x40] = { |
| 0x1810103, 0x1, 0x0, 0x0, 0x2c90000, 0x2c9, 0x0, 0x0, |
| 0xffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, |
| 0x1, 0x1388, 0x15e, 0x1, /* rest 0's */ |
| }; |
| static u32 madpayload_done[0x40] = { |
| 0x1810103, 0x1, 0x0, 0x0, 0x2c90000, 0x2c9, 0x0, 0x0, |
| 0xffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, |
| 0x40000001, 0x1388, 0x15e, /* rest 0's */ |
| }; |
| |
| dcnt = ARRAY_SIZE(madpayload_start); |
| hcnt = ARRAY_SIZE(hdr); |
| if (!swapped) { |
| /* for maintainability, do it at runtime */ |
| for (i = 0; i < hcnt; i++) { |
| dw = (__force u32) cpu_to_be32(hdr[i]); |
| hdr[i] = dw; |
| } |
| for (i = 0; i < dcnt; i++) { |
| dw = (__force u32) cpu_to_be32(madpayload_start[i]); |
| madpayload_start[i] = dw; |
| dw = (__force u32) cpu_to_be32(madpayload_done[i]); |
| madpayload_done[i] = dw; |
| } |
| swapped = 1; |
| } |
| |
| data = which ? madpayload_done : madpayload_start; |
| |
| autoneg_7322_sendpkt(ppd, hdr, dcnt, data); |
| qib_read_kreg64(dd, kr_scratch); |
| udelay(2); |
| autoneg_7322_sendpkt(ppd, hdr, dcnt, data); |
| qib_read_kreg64(dd, kr_scratch); |
| udelay(2); |
| } |
| |
| /* |
| * Do the absolute minimum to cause an IB speed change, and make it |
| * ready, but don't actually trigger the change. The caller will |
| * do that when ready (if link is in Polling training state, it will |
| * happen immediately, otherwise when link next goes down) |
| * |
| * This routine should only be used as part of the DDR autonegotation |
| * code for devices that are not compliant with IB 1.2 (or code that |
| * fixes things up for same). |
| * |
| * When link has gone down, and autoneg enabled, or autoneg has |
| * failed and we give up until next time we set both speeds, and |
| * then we want IBTA enabled as well as "use max enabled speed. |
| */ |
| static void set_7322_ibspeed_fast(struct qib_pportdata *ppd, u32 speed) |
| { |
| u64 newctrlb; |
| newctrlb = ppd->cpspec->ibcctrl_b & ~(IBA7322_IBC_SPEED_MASK | |
| IBA7322_IBC_IBTA_1_2_MASK | |
| IBA7322_IBC_MAX_SPEED_MASK); |
| |
| if (speed & (speed - 1)) /* multiple speeds */ |
| newctrlb |= (speed << IBA7322_IBC_SPEED_LSB) | |
| IBA7322_IBC_IBTA_1_2_MASK | |
| IBA7322_IBC_MAX_SPEED_MASK; |
| else |
| newctrlb |= speed == QIB_IB_QDR ? |
| IBA7322_IBC_SPEED_QDR | IBA7322_IBC_IBTA_1_2_MASK : |
| ((speed == QIB_IB_DDR ? |
| IBA7322_IBC_SPEED_DDR : IBA7322_IBC_SPEED_SDR)); |
| |
| if (newctrlb == ppd->cpspec->ibcctrl_b) |
| return; |
| |
| ppd->cpspec->ibcctrl_b = newctrlb; |
| qib_write_kreg_port(ppd, krp_ibcctrl_b, ppd->cpspec->ibcctrl_b); |
| qib_write_kreg(ppd->dd, kr_scratch, 0); |
| } |
| |
| /* |
| * This routine is only used when we are not talking to another |
| * IB 1.2-compliant device that we think can do DDR. |
| * (This includes all existing switch chips as of Oct 2007.) |
| * 1.2-compliant devices go directly to DDR prior to reaching INIT |
| */ |
| static void try_7322_autoneg(struct qib_pportdata *ppd) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&ppd->lflags_lock, flags); |
| ppd->lflags |= QIBL_IB_AUTONEG_INPROG; |
| spin_unlock_irqrestore(&ppd->lflags_lock, flags); |
| qib_autoneg_7322_send(ppd, 0); |
| set_7322_ibspeed_fast(ppd, QIB_IB_DDR); |
| qib_7322_mini_pcs_reset(ppd); |
| /* 2 msec is minimum length of a poll cycle */ |
| queue_delayed_work(ib_wq, &ppd->cpspec->autoneg_work, |
| msecs_to_jiffies(2)); |
| } |
| |
| /* |
| * Handle the empirically determined mechanism for auto-negotiation |
| * of DDR speed with switches. |
| */ |
| static void autoneg_7322_work(struct work_struct *work) |
| { |
| struct qib_pportdata *ppd; |
| struct qib_devdata *dd; |
| u64 startms; |
| u32 i; |
| unsigned long flags; |
| |
| ppd = container_of(work, struct qib_chippport_specific, |
| autoneg_work.work)->ppd; |
| dd = ppd->dd; |
| |
| startms = jiffies_to_msecs(jiffies); |
| |
| /* |
| * Busy wait for this first part, it should be at most a |
| * few hundred usec, since we scheduled ourselves for 2msec. |
| */ |
| for (i = 0; i < 25; i++) { |
| if (SYM_FIELD(ppd->lastibcstat, IBCStatusA_0, LinkState) |
| == IB_7322_LT_STATE_POLLQUIET) { |
| qib_set_linkstate(ppd, QIB_IB_LINKDOWN_DISABLE); |
| break; |
| } |
| udelay(100); |
| } |
| |
| if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) |
| goto done; /* we got there early or told to stop */ |
| |
| /* we expect this to timeout */ |
| if (wait_event_timeout(ppd->cpspec->autoneg_wait, |
| !(ppd->lflags & QIBL_IB_AUTONEG_INPROG), |
| msecs_to_jiffies(90))) |
| goto done; |
| qib_7322_mini_pcs_reset(ppd); |
| |
| /* we expect this to timeout */ |
| if (wait_event_timeout(ppd->cpspec->autoneg_wait, |
| !(ppd->lflags & QIBL_IB_AUTONEG_INPROG), |
| msecs_to_jiffies(1700))) |
| goto done; |
| qib_7322_mini_pcs_reset(ppd); |
| |
| set_7322_ibspeed_fast(ppd, QIB_IB_SDR); |
| |
| /* |
| * Wait up to 250 msec for link to train and get to INIT at DDR; |
| * this should terminate early. |
| */ |
| wait_event_timeout(ppd->cpspec->autoneg_wait, |
| !(ppd->lflags & QIBL_IB_AUTONEG_INPROG), |
| msecs_to_jiffies(250)); |
| done: |
| if (ppd->lflags & QIBL_IB_AUTONEG_INPROG) { |
| spin_lock_irqsave(&ppd->lflags_lock, flags); |
| ppd->lflags &= ~QIBL_IB_AUTONEG_INPROG; |
| if (ppd->cpspec->autoneg_tries == AUTONEG_TRIES) { |
| ppd->lflags |= QIBL_IB_AUTONEG_FAILED; |
| ppd->cpspec->autoneg_tries = 0; |
| } |
| spin_unlock_irqrestore(&ppd->lflags_lock, flags); |
| set_7322_ibspeed_fast(ppd, ppd->link_speed_enabled); |
| } |
| } |
| |
| /* |
| * This routine is used to request IPG set in the QLogic switch. |
| * Only called if r1. |
| */ |
| static void try_7322_ipg(struct qib_pportdata *ppd) |
| { |
| struct qib_ibport *ibp = &ppd->ibport_data; |
| struct ib_mad_send_buf *send_buf; |
| struct ib_mad_agent *agent; |
| struct ib_smp *smp; |
| unsigned delay; |
| int ret; |
| |
| agent = ibp->send_agent; |
| if (!agent) |
| goto retry; |
| |
| send_buf = ib_create_send_mad(agent, 0, 0, 0, IB_MGMT_MAD_HDR, |
| IB_MGMT_MAD_DATA, GFP_ATOMIC); |
| if (IS_ERR(send_buf)) |
| goto retry; |
| |
| if (!ibp->smi_ah) { |
| struct ib_ah_attr attr; |
| struct ib_ah *ah; |
| |
| memset(&attr, 0, sizeof attr); |
| attr.dlid = be16_to_cpu(IB_LID_PERMISSIVE); |
| attr.port_num = ppd->port; |
| ah = ib_create_ah(ibp->qp0->ibqp.pd, &attr); |
| if (IS_ERR(ah)) |
| ret = -EINVAL; |
| else { |
| send_buf->ah = ah; |
| ibp->smi_ah = to_iah(ah); |
| ret = 0; |
| } |
| } else { |
| send_buf->ah = &ibp->smi_ah->ibah; |
| ret = 0; |
| } |
| |
| smp = send_buf->mad; |
| smp->base_version = IB_MGMT_BASE_VERSION; |
| smp->mgmt_class = IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE; |
| smp->class_version = 1; |
| smp->method = IB_MGMT_METHOD_SEND; |
| smp->hop_cnt = 1; |
| smp->attr_id = QIB_VENDOR_IPG; |
| smp->attr_mod = 0; |
| |
| if (!ret) |
| ret = ib_post_send_mad(send_buf, NULL); |
| if (ret) |
| ib_free_send_mad(send_buf); |
| retry: |
| delay = 2 << ppd->cpspec->ipg_tries; |
| queue_delayed_work(ib_wq, &ppd->cpspec->ipg_work, |
| msecs_to_jiffies(delay)); |
| } |
| |
| /* |
| * Timeout handler for setting IPG. |
| * Only called if r1. |
| */ |
| static void ipg_7322_work(struct work_struct *work) |
| { |
| struct qib_pportdata *ppd; |
| |
| ppd = container_of(work, struct qib_chippport_specific, |
| ipg_work.work)->ppd; |
| if ((ppd->lflags & (QIBL_LINKINIT | QIBL_LINKARMED | QIBL_LINKACTIVE)) |
| && ++ppd->cpspec->ipg_tries <= 10) |
| try_7322_ipg(ppd); |
| } |
| |
| static u32 qib_7322_iblink_state(u64 ibcs) |
| { |
| u32 state = (u32)SYM_FIELD(ibcs, IBCStatusA_0, LinkState); |
| |
| switch (state) { |
| case IB_7322_L_STATE_INIT: |
| state = IB_PORT_INIT; |
| break; |
| case IB_7322_L_STATE_ARM: |
| state = IB_PORT_ARMED; |
| break; |
| case IB_7322_L_STATE_ACTIVE: |
| /* fall through */ |
| case IB_7322_L_STATE_ACT_DEFER: |
| state = IB_PORT_ACTIVE; |
| break; |
| default: /* fall through */ |
| case IB_7322_L_STATE_DOWN: |
| state = IB_PORT_DOWN; |
| break; |
| } |
| return state; |
| } |
| |
| /* returns the IBTA port state, rather than the IBC link training state */ |
| static u8 qib_7322_phys_portstate(u64 ibcs) |
| { |
| u8 state = (u8)SYM_FIELD(ibcs, IBCStatusA_0, LinkTrainingState); |
| return qib_7322_physportstate[state]; |
| } |
| |
| static int qib_7322_ib_updown(struct qib_pportdata *ppd, int ibup, u64 ibcs) |
| { |
| int ret = 0, symadj = 0; |
| unsigned long flags; |
| int mult; |
| |
| spin_lock_irqsave(&ppd->lflags_lock, flags); |
| ppd->lflags &= ~QIBL_IB_FORCE_NOTIFY; |
| spin_unlock_irqrestore(&ppd->lflags_lock, flags); |
| |
| /* Update our picture of width and speed from chip */ |
| if (ibcs & SYM_MASK(IBCStatusA_0, LinkSpeedQDR)) { |
| ppd->link_speed_active = QIB_IB_QDR; |
| mult = 4; |
| } else if (ibcs & SYM_MASK(IBCStatusA_0, LinkSpeedActive)) { |
| ppd->link_speed_active = QIB_IB_DDR; |
| mult = 2; |
| } else { |
| ppd->link_speed_active = QIB_IB_SDR; |
| mult = 1; |
| } |
| if (ibcs & SYM_MASK(IBCStatusA_0, LinkWidthActive)) { |
| ppd->link_width_active = IB_WIDTH_4X; |
| mult *= 4; |
| } else |
| ppd->link_width_active = IB_WIDTH_1X; |
| ppd->delay_mult = ib_rate_to_delay[mult_to_ib_rate(mult)]; |
| |
| if (!ibup) { |
| u64 clr; |
| |
| /* Link went down. */ |
| /* do IPG MAD again after linkdown, even if last time failed */ |
| ppd->cpspec->ipg_tries = 0; |
| clr = qib_read_kreg_port(ppd, krp_ibcstatus_b) & |
| (SYM_MASK(IBCStatusB_0, heartbeat_timed_out) | |
| SYM_MASK(IBCStatusB_0, heartbeat_crosstalk)); |
| if (clr) |
| qib_write_kreg_port(ppd, krp_ibcstatus_b, clr); |
| if (!(ppd->lflags & (QIBL_IB_AUTONEG_FAILED | |
| QIBL_IB_AUTONEG_INPROG))) |
| set_7322_ibspeed_fast(ppd, ppd->link_speed_enabled); |
| if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) { |
| struct qib_qsfp_data *qd = |
| &ppd->cpspec->qsfp_data; |
| /* unlock the Tx settings, speed may change */ |
| qib_write_kreg_port(ppd, krp_tx_deemph_override, |
| SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, |
| reset_tx_deemphasis_override)); |
| qib_cancel_sends(ppd); |
| /* on link down, ensure sane pcs state */ |
| qib_7322_mini_pcs_reset(ppd); |
| /* schedule the qsfp refresh which should turn the link |
| off */ |
| if (ppd->dd->flags & QIB_HAS_QSFP) { |
| qd->t_insert = get_jiffies_64(); |
| queue_work(ib_wq, &qd->work); |
| } |
| spin_lock_irqsave(&ppd->sdma_lock, flags); |
| if (__qib_sdma_running(ppd)) |
| __qib_sdma_process_event(ppd, |
| qib_sdma_event_e70_go_idle); |
| spin_unlock_irqrestore(&ppd->sdma_lock, flags); |
| } |
| clr = read_7322_creg32_port(ppd, crp_iblinkdown); |
| if (clr == ppd->cpspec->iblnkdownsnap) |
| ppd->cpspec->iblnkdowndelta++; |
| } else { |
| if (qib_compat_ddr_negotiate && |
| !(ppd->lflags & (QIBL_IB_AUTONEG_FAILED | |
| QIBL_IB_AUTONEG_INPROG)) && |
| ppd->link_speed_active == QIB_IB_SDR && |
| (ppd->link_speed_enabled & QIB_IB_DDR) |
| && ppd->cpspec->autoneg_tries < AUTONEG_TRIES) { |
| /* we are SDR, and auto-negotiation enabled */ |
| ++ppd->cpspec->autoneg_tries; |
| if (!ppd->cpspec->ibdeltainprog) { |
| ppd->cpspec->ibdeltainprog = 1; |
| ppd->cpspec->ibsymdelta += |
| read_7322_creg32_port(ppd, |
| crp_ibsymbolerr) - |
| ppd->cpspec->ibsymsnap; |
| ppd->cpspec->iblnkerrdelta += |
| read_7322_creg32_port(ppd, |
| crp_iblinkerrrecov) - |
| ppd->cpspec->iblnkerrsnap; |
| } |
| try_7322_autoneg(ppd); |
| ret = 1; /* no other IB status change processing */ |
| } else if ((ppd->lflags & QIBL_IB_AUTONEG_INPROG) && |
| ppd->link_speed_active == QIB_IB_SDR) { |
| qib_autoneg_7322_send(ppd, 1); |
| set_7322_ibspeed_fast(ppd, QIB_IB_DDR); |
| qib_7322_mini_pcs_reset(ppd); |
| udelay(2); |
| ret = 1; /* no other IB status change processing */ |
| } else if ((ppd->lflags & QIBL_IB_AUTONEG_INPROG) && |
| (ppd->link_speed_active & QIB_IB_DDR)) { |
| spin_lock_irqsave(&ppd->lflags_lock, flags); |
| ppd->lflags &= ~(QIBL_IB_AUTONEG_INPROG | |
| QIBL_IB_AUTONEG_FAILED); |
| spin_unlock_irqrestore(&ppd->lflags_lock, flags); |
| ppd->cpspec->autoneg_tries = 0; |
| /* re-enable SDR, for next link down */ |
| set_7322_ibspeed_fast(ppd, ppd->link_speed_enabled); |
| wake_up(&ppd->cpspec->autoneg_wait); |
| symadj = 1; |
| } else if (ppd->lflags & QIBL_IB_AUTONEG_FAILED) { |
| /* |
| * Clear autoneg failure flag, and do setup |
| * so we'll try next time link goes down and |
| * back to INIT (possibly connected to a |
| * different device). |
| */ |
| spin_lock_irqsave(&ppd->lflags_lock, flags); |
| ppd->lflags &= ~QIBL_IB_AUTONEG_FAILED; |
| spin_unlock_irqrestore(&ppd->lflags_lock, flags); |
| ppd->cpspec->ibcctrl_b |= IBA7322_IBC_IBTA_1_2_MASK; |
| symadj = 1; |
| } |
| if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) { |
| symadj = 1; |
| if (ppd->dd->cspec->r1 && ppd->cpspec->ipg_tries <= 10) |
| try_7322_ipg(ppd); |
| if (!ppd->cpspec->recovery_init) |
| setup_7322_link_recovery(ppd, 0); |
| ppd->cpspec->qdr_dfe_time = jiffies + |
| msecs_to_jiffies(QDR_DFE_DISABLE_DELAY); |
| } |
| ppd->cpspec->ibmalfusesnap = 0; |
| ppd->cpspec->ibmalfsnap = read_7322_creg32_port(ppd, |
| crp_errlink); |
| } |
| if (symadj) { |
| ppd->cpspec->iblnkdownsnap = |
| read_7322_creg32_port(ppd, crp_iblinkdown); |
| if (ppd->cpspec->ibdeltainprog) { |
| ppd->cpspec->ibdeltainprog = 0; |
| ppd->cpspec->ibsymdelta += read_7322_creg32_port(ppd, |
| crp_ibsymbolerr) - ppd->cpspec->ibsymsnap; |
| ppd->cpspec->iblnkerrdelta += read_7322_creg32_port(ppd, |
| crp_iblinkerrrecov) - ppd->cpspec->iblnkerrsnap; |
| } |
| } else if (!ibup && qib_compat_ddr_negotiate && |
| !ppd->cpspec->ibdeltainprog && |
| !(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) { |
| ppd->cpspec->ibdeltainprog = 1; |
| ppd->cpspec->ibsymsnap = read_7322_creg32_port(ppd, |
| crp_ibsymbolerr); |
| ppd->cpspec->iblnkerrsnap = read_7322_creg32_port(ppd, |
| crp_iblinkerrrecov); |
| } |
| |
| if (!ret) |
| qib_setup_7322_setextled(ppd, ibup); |
| return ret; |
| } |
| |
| /* |
| * Does read/modify/write to appropriate registers to |
| * set output and direction bits selected by mask. |
| * these are in their canonical postions (e.g. lsb of |
| * dir will end up in D48 of extctrl on existing chips). |
| * returns contents of GP Inputs. |
| */ |
| static int gpio_7322_mod(struct qib_devdata *dd, u32 out, u32 dir, u32 mask) |
| { |
| u64 read_val, new_out; |
| unsigned long flags; |
| |
| if (mask) { |
| /* some bits being written, lock access to GPIO */ |
| dir &= mask; |
| out &= mask; |
| spin_lock_irqsave(&dd->cspec->gpio_lock, flags); |
| dd->cspec->extctrl &= ~((u64)mask << SYM_LSB(EXTCtrl, GPIOOe)); |
| dd->cspec->extctrl |= ((u64) dir << SYM_LSB(EXTCtrl, GPIOOe)); |
| new_out = (dd->cspec->gpio_out & ~mask) | out; |
| |
| qib_write_kreg(dd, kr_extctrl, dd->cspec->extctrl); |
| qib_write_kreg(dd, kr_gpio_out, new_out); |
| dd->cspec->gpio_out = new_out; |
| spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags); |
| } |
| /* |
| * It is unlikely that a read at this time would get valid |
| * data on a pin whose direction line was set in the same |
| * call to this function. We include the read here because |
| * that allows us to potentially combine a change on one pin with |
| * a read on another, and because the old code did something like |
| * this. |
| */ |
| read_val = qib_read_kreg64(dd, kr_extstatus); |
| return SYM_FIELD(read_val, EXTStatus, GPIOIn); |
| } |
| |
| /* Enable writes to config EEPROM, if possible. Returns previous state */ |
| static int qib_7322_eeprom_wen(struct qib_devdata *dd, int wen) |
| { |
| int prev_wen; |
| u32 mask; |
| |
| mask = 1 << QIB_EEPROM_WEN_NUM; |
| prev_wen = ~gpio_7322_mod(dd, 0, 0, 0) >> QIB_EEPROM_WEN_NUM; |
| gpio_7322_mod(dd, wen ? 0 : mask, mask, mask); |
| |
| return prev_wen & 1; |
| } |
| |
| /* |
| * Read fundamental info we need to use the chip. These are |
| * the registers that describe chip capabilities, and are |
| * saved in shadow registers. |
| */ |
| static void get_7322_chip_params(struct qib_devdata *dd) |
| { |
| u64 val; |
| u32 piobufs; |
| int mtu; |
| |
| dd->palign = qib_read_kreg32(dd, kr_pagealign); |
| |
| dd->uregbase = qib_read_kreg32(dd, kr_userregbase); |
| |
| dd->rcvtidcnt = qib_read_kreg32(dd, kr_rcvtidcnt); |
| dd->rcvtidbase = qib_read_kreg32(dd, kr_rcvtidbase); |
| dd->rcvegrbase = qib_read_kreg32(dd, kr_rcvegrbase); |
| dd->piobufbase = qib_read_kreg64(dd, kr_sendpiobufbase); |
| dd->pio2k_bufbase = dd->piobufbase & 0xffffffff; |
| |
| val = qib_read_kreg64(dd, kr_sendpiobufcnt); |
| dd->piobcnt2k = val & ~0U; |
| dd->piobcnt4k = val >> 32; |
| val = qib_read_kreg64(dd, kr_sendpiosize); |
| dd->piosize2k = val & ~0U; |
| dd->piosize4k = val >> 32; |
| |
| mtu = ib_mtu_enum_to_int(qib_ibmtu); |
| if (mtu == -1) |
| mtu = QIB_DEFAULT_MTU; |
| dd->pport[0].ibmtu = (u32)mtu; |
| dd->pport[1].ibmtu = (u32)mtu; |
| |
| /* these may be adjusted in init_chip_wc_pat() */ |
| dd->pio2kbase = (u32 __iomem *) |
| ((char __iomem *) dd->kregbase + dd->pio2k_bufbase); |
| dd->pio4kbase = (u32 __iomem *) |
| ((char __iomem *) dd->kregbase + |
| (dd->piobufbase >> 32)); |
| /* |
| * 4K buffers take 2 pages; we use roundup just to be |
| * paranoid; we calculate it once here, rather than on |
| * ever buf allocate |
| */ |
| dd->align4k = ALIGN(dd->piosize4k, dd->palign); |
| |
| piobufs = dd->piobcnt4k + dd->piobcnt2k + NUM_VL15_BUFS; |
| |
| dd->pioavregs = ALIGN(piobufs, sizeof(u64) * BITS_PER_BYTE / 2) / |
| (sizeof(u64) * BITS_PER_BYTE / 2); |
| } |
| |
| /* |
| * The chip base addresses in cspec and cpspec have to be set |
| * after possible init_chip_wc_pat(), rather than in |
| * get_7322_chip_params(), so split out as separate function |
| */ |
| static void qib_7322_set_baseaddrs(struct qib_devdata *dd) |
| { |
| u32 cregbase; |
| cregbase = qib_read_kreg32(dd, kr_counterregbase); |
| |
| dd->cspec->cregbase = (u64 __iomem *)(cregbase + |
| (char __iomem *)dd->kregbase); |
| |
| dd->egrtidbase = (u64 __iomem *) |
| ((char __iomem *) dd->kregbase + dd->rcvegrbase); |
| |
| /* port registers are defined as relative to base of chip */ |
| dd->pport[0].cpspec->kpregbase = |
| (u64 __iomem *)((char __iomem *)dd->kregbase); |
| dd->pport[1].cpspec->kpregbase = |
| (u64 __iomem *)(dd->palign + |
| (char __iomem *)dd->kregbase); |
| dd->pport[0].cpspec->cpregbase = |
| (u64 __iomem *)(qib_read_kreg_port(&dd->pport[0], |
| kr_counterregbase) + (char __iomem *)dd->kregbase); |
| dd->pport[1].cpspec->cpregbase = |
| (u64 __iomem *)(qib_read_kreg_port(&dd->pport[1], |
| kr_counterregbase) + (char __iomem *)dd->kregbase); |
| } |
| |
| /* |
| * This is a fairly special-purpose observer, so we only support |
| * the port-specific parts of SendCtrl |
| */ |
| |
| #define SENDCTRL_SHADOWED (SYM_MASK(SendCtrl_0, SendEnable) | \ |
| SYM_MASK(SendCtrl_0, SDmaEnable) | \ |
| SYM_MASK(SendCtrl_0, SDmaIntEnable) | \ |
| SYM_MASK(SendCtrl_0, SDmaSingleDescriptor) | \ |
| SYM_MASK(SendCtrl_0, SDmaHalt) | \ |
| SYM_MASK(SendCtrl_0, IBVLArbiterEn) | \ |
| SYM_MASK(SendCtrl_0, ForceCreditUpToDate)) |
| |
| static int sendctrl_hook(struct qib_devdata *dd, |
| const struct diag_observer *op, u32 offs, |
| u64 *data, u64 mask, int only_32) |
| { |
| unsigned long flags; |
| unsigned idx; |
| unsigned pidx; |
| struct qib_pportdata *ppd = NULL; |
| u64 local_data, all_bits; |
| |
| /* |
| * The fixed correspondence between Physical ports and pports is |
| * severed. We need to hunt for the ppd that corresponds |
| * to the offset we got. And we have to do that without admitting |
| * we know the stride, apparently. |
| */ |
| for (pidx = 0; pidx < dd->num_pports; ++pidx) { |
| u64 __iomem *psptr; |
| u32 psoffs; |
| |
| ppd = dd->pport + pidx; |
| if (!ppd->cpspec->kpregbase) |
| continue; |
| |
| psptr = ppd->cpspec->kpregbase + krp_sendctrl; |
| psoffs = (u32) (psptr - dd->kregbase) * sizeof(*psptr); |
| if (psoffs == offs) |
| break; |
| } |
| |
| /* If pport is not being managed by driver, just avoid shadows. */ |
| if (pidx >= dd->num_pports) |
| ppd = NULL; |
| |
| /* In any case, "idx" is flat index in kreg space */ |
| idx = offs / sizeof(u64); |
| |
| all_bits = ~0ULL; |
| if (only_32) |
| all_bits >>= 32; |
| |
| spin_lock_irqsave(&dd->sendctrl_lock, flags); |
| if (!ppd || (mask & all_bits) != all_bits) { |
| /* |
| * At least some mask bits are zero, so we need |
| * to read. The judgement call is whether from |
| * reg or shadow. First-cut: read reg, and complain |
| * if any bits which should be shadowed are different |
| * from their shadowed value. |
| */ |
| if (only_32) |
| local_data = (u64)qib_read_kreg32(dd, idx); |
| else |
| local_data = qib_read_kreg64(dd, idx); |
| *data = (local_data & ~mask) | (*data & mask); |
| } |
| if (mask) { |
| /* |
| * At least some mask bits are one, so we need |
| * to write, but only shadow some bits. |
| */ |
| u64 sval, tval; /* Shadowed, transient */ |
| |
| /* |
| * New shadow val is bits we don't want to touch, |
| * ORed with bits we do, that are intended for shadow. |
| */ |
| if (ppd) { |
| sval = ppd->p_sendctrl & ~mask; |
| sval |= *data & SENDCTRL_SHADOWED & mask; |
| ppd->p_sendctrl = sval; |
| } else |
| sval = *data & SENDCTRL_SHADOWED & mask; |
| tval = sval | (*data & ~SENDCTRL_SHADOWED & mask); |
| qib_write_kreg(dd, idx, tval); |
| qib_write_kreg(dd, kr_scratch, 0Ull); |
| } |
| spin_unlock_irqrestore(&dd->sendctrl_lock, flags); |
| return only_32 ? 4 : 8; |
| } |
| |
| static const struct diag_observer sendctrl_0_observer = { |
| sendctrl_hook, KREG_IDX(SendCtrl_0) * sizeof(u64), |
| KREG_IDX(SendCtrl_0) * sizeof(u64) |
| }; |
| |
| static const struct diag_observer sendctrl_1_observer = { |
| sendctrl_hook, KREG_IDX(SendCtrl_1) * sizeof(u64), |
| KREG_IDX(SendCtrl_1) * sizeof(u64) |
| }; |
| |
| static ushort sdma_fetch_prio = 8; |
| module_param_named(sdma_fetch_prio, sdma_fetch_prio, ushort, S_IRUGO); |
| MODULE_PARM_DESC(sdma_fetch_prio, "SDMA descriptor fetch priority"); |
| |
| /* Besides logging QSFP events, we set appropriate TxDDS values */ |
| static void init_txdds_table(struct qib_pportdata *ppd, int override); |
| |
| static void qsfp_7322_event(struct work_struct *work) |
| { |
| struct qib_qsfp_data *qd; |
| struct qib_pportdata *ppd; |
| u64 pwrup; |
| unsigned long flags; |
| int ret; |
| u32 le2; |
| |
| qd = container_of(work, struct qib_qsfp_data, work); |
| ppd = qd->ppd; |
| pwrup = qd->t_insert + |
| msecs_to_jiffies(QSFP_PWR_LAG_MSEC - QSFP_MODPRS_LAG_MSEC); |
| |
| /* Delay for 20 msecs to allow ModPrs resistor to setup */ |
| mdelay(QSFP_MODPRS_LAG_MSEC); |
| |
| if (!qib_qsfp_mod_present(ppd)) { |
| ppd->cpspec->qsfp_data.modpresent = 0; |
| /* Set the physical link to disabled */ |
| qib_set_ib_7322_lstate(ppd, 0, |
| QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); |
| spin_lock_irqsave(&ppd->lflags_lock, flags); |
| ppd->lflags &= ~QIBL_LINKV; |
| spin_unlock_irqrestore(&ppd->lflags_lock, flags); |
| } else { |
| /* |
| * Some QSFP's not only do not respond until the full power-up |
| * time, but may behave badly if we try. So hold off responding |
| * to insertion. |
| */ |
| while (1) { |
| u64 now = get_jiffies_64(); |
| if (time_after64(now, pwrup)) |
| break; |
| msleep(20); |
| } |
| |
| ret = qib_refresh_qsfp_cache(ppd, &qd->cache); |
| |
| /* |
| * Need to change LE2 back to defaults if we couldn't |
| * read the cable type (to handle cable swaps), so do this |
| * even on failure to read cable information. We don't |
| * get here for QME, so IS_QME check not needed here. |
| */ |
| if (!ret && !ppd->dd->cspec->r1) { |
| if (QSFP_IS_ACTIVE_FAR(qd->cache.tech)) |
| le2 = LE2_QME; |
| else if (qd->cache.atten[1] >= qib_long_atten && |
| QSFP_IS_CU(qd->cache.tech)) |
| le2 = LE2_5m; |
| else |
| le2 = LE2_DEFAULT; |
| } else |
| le2 = LE2_DEFAULT; |
| ibsd_wr_allchans(ppd, 13, (le2 << 7), BMASK(9, 7)); |
| /* |
| * We always change parameteters, since we can choose |
| * values for cables without eeproms, and the cable may have |
| * changed from a cable with full or partial eeprom content |
| * to one with partial or no content. |
| */ |
| init_txdds_table(ppd, 0); |
| /* The physical link is being re-enabled only when the |
| * previous state was DISABLED and the VALID bit is not |
| * set. This should only happen when the cable has been |
| * physically pulled. */ |
| if (!ppd->cpspec->qsfp_data.modpresent && |
| (ppd->lflags & (QIBL_LINKV | QIBL_IB_LINK_DISABLED))) { |
| ppd->cpspec->qsfp_data.modpresent = 1; |
| qib_set_ib_7322_lstate(ppd, 0, |
| QLOGIC_IB_IBCC_LINKINITCMD_SLEEP); |
| spin_lock_irqsave(&ppd->lflags_lock, flags); |
| ppd->lflags |= QIBL_LINKV; |
| spin_unlock_irqrestore(&ppd->lflags_lock, flags); |
| } |
| } |
| } |
| |
| /* |
| * There is little we can do but complain to the user if QSFP |
| * initialization fails. |
| */ |
| static void qib_init_7322_qsfp(struct qib_pportdata *ppd) |
| { |
| unsigned long flags; |
| struct qib_qsfp_data *qd = &ppd->cpspec->qsfp_data; |
| struct qib_devdata *dd = ppd->dd; |
| u64 mod_prs_bit = QSFP_GPIO_MOD_PRS_N; |
| |
| mod_prs_bit <<= (QSFP_GPIO_PORT2_SHIFT * ppd->hw_pidx); |
| qd->ppd = ppd; |
| qib_qsfp_init(qd, qsfp_7322_event); |
| spin_lock_irqsave(&dd->cspec->gpio_lock, flags); |
| dd->cspec->extctrl |= (mod_prs_bit << SYM_LSB(EXTCtrl, GPIOInvert)); |
| dd->cspec->gpio_mask |= mod_prs_bit; |
| qib_write_kreg(dd, kr_extctrl, dd->cspec->extctrl); |
| qib_write_kreg(dd, kr_gpio_mask, dd->cspec->gpio_mask); |
| spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags); |
| } |
| |
| /* |
| * called at device initialization time, and also if the txselect |
| * module parameter is changed. This is used for cables that don't |
| * have valid QSFP EEPROMs (not present, or attenuation is zero). |
| * We initialize to the default, then if there is a specific |
| * unit,port match, we use that (and set it immediately, for the |
| * current speed, if the link is at INIT or better). |
| * String format is "default# unit#,port#=# ... u,p=#", separators must |
| * be a SPACE character. A newline terminates. The u,p=# tuples may |
| * optionally have "u,p=#,#", where the final # is the H1 value |
| * The last specific match is used (actually, all are used, but last |
| * one is the one that winds up set); if none at all, fall back on default. |
| */ |
| static void set_no_qsfp_atten(struct qib_devdata *dd, int change) |
| { |
| char *nxt, *str; |
| u32 pidx, unit, port, deflt, h1; |
| unsigned long val; |
| int any = 0, seth1; |
| int txdds_size; |
| |
| str = txselect_list; |
| |
| /* default number is validated in setup_txselect() */ |
| deflt = simple_strtoul(str, &nxt, 0); |
| for (pidx = 0; pidx < dd->num_pports; ++pidx) |
| dd->pport[pidx].cpspec->no_eep = deflt; |
| |
| txdds_size = TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ; |
| if (IS_QME(dd) || IS_QMH(dd)) |
| txdds_size += TXDDS_MFG_SZ; |
| |
| while (*nxt && nxt[1]) { |
| str = ++nxt; |
| unit = simple_strtoul(str, &nxt, 0); |
| if (nxt == str || !*nxt || *nxt != ',') { |
| while (*nxt && *nxt++ != ' ') /* skip to next, if any */ |
| ; |
| continue; |
| } |
| str = ++nxt; |
| port = simple_strtoul(str, &nxt, 0); |
| if (nxt == str || *nxt != '=') { |
| while (*nxt && *nxt++ != ' ') /* skip to next, if any */ |
| ; |
| continue; |
| } |
| str = ++nxt; |
| val = simple_strtoul(str, &nxt, 0); |
| if (nxt == str) { |
| while (*nxt && *nxt++ != ' ') /* skip to next, if any */ |
| ; |
| continue; |
| } |
| if (val >= txdds_size) |
| continue; |
| seth1 = 0; |
| h1 = 0; /* gcc thinks it might be used uninitted */ |
| if (*nxt == ',' && nxt[1]) { |
| str = ++nxt; |
| h1 = (u32)simple_strtoul(str, &nxt, 0); |
| if (nxt == str) |
| while (*nxt && *nxt++ != ' ') /* skip */ |
| ; |
| else |
| seth1 = 1; |
| } |
| for (pidx = 0; dd->unit == unit && pidx < dd->num_pports; |
| ++pidx) { |
| struct qib_pportdata *ppd = &dd->pport[pidx]; |
| |
| if (ppd->port != port || !ppd->link_speed_supported) |
| continue; |
| ppd->cpspec->no_eep = val; |
| if (seth1) |
| ppd->cpspec->h1_val = h1; |
| /* now change the IBC and serdes, overriding generic */ |
| init_txdds_table(ppd, 1); |
| /* Re-enable the physical state machine on mezz boards |
| * now that the correct settings have been set. |
| * QSFP boards are handles by the QSFP event handler */ |
| if (IS_QMH(dd) || IS_QME(dd)) |
| qib_set_ib_7322_lstate(ppd, 0, |
| QLOGIC_IB_IBCC_LINKINITCMD_SLEEP); |
| any++; |
| } |
| if (*nxt == '\n') |
| break; /* done */ |
| } |
| if (change && !any) { |
| /* no specific setting, use the default. |
| * Change the IBC and serdes, but since it's |
| * general, don't override specific settings. |
| */ |
| for (pidx = 0; pidx < dd->num_pports; ++pidx) |
| if (dd->pport[pidx].link_speed_supported) |
| init_txdds_table(&dd->pport[pidx], 0); |
| } |
| } |
| |
| /* handle the txselect parameter changing */ |
| static int setup_txselect(const char *str, struct kernel_param *kp) |
| { |
| struct qib_devdata *dd; |
| unsigned long val; |
| char *n; |
| if (strlen(str) >= MAX_ATTEN_LEN) { |
| printk(KERN_INFO QIB_DRV_NAME " txselect_values string " |
| "too long\n"); |
| return -ENOSPC; |
| } |
| val = simple_strtoul(str, &n, 0); |
| if (n == str || val >= (TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ + |
| TXDDS_MFG_SZ)) { |
| printk(KERN_INFO QIB_DRV_NAME |
| "txselect_values must start with a number < %d\n", |
| TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ + TXDDS_MFG_SZ); |
| return -EINVAL; |
| } |
| strcpy(txselect_list, str); |
| |
| list_for_each_entry(dd, &qib_dev_list, list) |
| if (dd->deviceid == PCI_DEVICE_ID_QLOGIC_IB_7322) |
| set_no_qsfp_atten(dd, 1); |
| return 0; |
| } |
| |
| /* |
| * Write the final few registers that depend on some of the |
| * init setup. Done late in init, just before bringing up |
| * the serdes. |
| */ |
| static int qib_late_7322_initreg(struct qib_devdata *dd) |
| { |
| int ret = 0, n; |
| u64 val; |
| |
| qib_write_kreg(dd, kr_rcvhdrentsize, dd->rcvhdrentsize); |
| qib_write_kreg(dd, kr_rcvhdrsize, dd->rcvhdrsize); |
| qib_write_kreg(dd, kr_rcvhdrcnt, dd->rcvhdrcnt); |
| qib_write_kreg(dd, kr_sendpioavailaddr, dd->pioavailregs_phys); |
| val = qib_read_kreg64(dd, kr_sendpioavailaddr); |
| if (val != dd->pioavailregs_phys) { |
| qib_dev_err(dd, "Catastrophic software error, " |
| "SendPIOAvailAddr written as %lx, " |
| "read back as %llx\n", |
| (unsigned long) dd->pioavailregs_phys, |
| (unsigned long long) val); |
| ret = -EINVAL; |
| } |
| |
| n = dd->piobcnt2k + dd->piobcnt4k + NUM_VL15_BUFS; |
| qib_7322_txchk_change(dd, 0, n, TXCHK_CHG_TYPE_KERN, NULL); |
| /* driver sends get pkey, lid, etc. checking also, to catch bugs */ |
| qib_7322_txchk_change(dd, 0, n, TXCHK_CHG_TYPE_ENAB1, NULL); |
| |
| qib_register_observer(dd, &sendctrl_0_observer); |
| qib_register_observer(dd, &sendctrl_1_observer); |
| |
| dd->control &= ~QLOGIC_IB_C_SDMAFETCHPRIOEN; |
| qib_write_kreg(dd, kr_control, dd->control); |
| /* |
| * Set SendDmaFetchPriority and init Tx params, including |
| * QSFP handler on boards that have QSFP. |
| * First set our default attenuation entry for cables that |
| * don't have valid attenuation. |
| */ |
| set_no_qsfp_atten(dd, 0); |
| for (n = 0; n < dd->num_pports; ++n) { |
| struct qib_pportdata *ppd = dd->pport + n; |
| |
| qib_write_kreg_port(ppd, krp_senddmaprioritythld, |
| sdma_fetch_prio & 0xf); |
| /* Initialize qsfp if present on board. */ |
| if (dd->flags & QIB_HAS_QSFP) |
| qib_init_7322_qsfp(ppd); |
| } |
| dd->control |= QLOGIC_IB_C_SDMAFETCHPRIOEN; |
| qib_write_kreg(dd, kr_control, dd->control); |
| |
| return ret; |
| } |
| |
| /* per IB port errors. */ |
| #define SENDCTRL_PIBP (MASK_ACROSS(0, 1) | MASK_ACROSS(3, 3) | \ |
| MASK_ACROSS(8, 15)) |
| #define RCVCTRL_PIBP (MASK_ACROSS(0, 17) | MASK_ACROSS(39, 41)) |
| #define ERRS_PIBP (MASK_ACROSS(57, 58) | MASK_ACROSS(54, 54) | \ |
| MASK_ACROSS(36, 49) | MASK_ACROSS(29, 34) | MASK_ACROSS(14, 17) | \ |
| MASK_ACROSS(0, 11)) |
| |
| /* |
| * Write the initialization per-port registers that need to be done at |
| * driver load and after reset completes (i.e., that aren't done as part |
| * of other init procedures called from qib_init.c). |
| * Some of these should be redundant on reset, but play safe. |
| */ |
| static void write_7322_init_portregs(struct qib_pportdata *ppd) |
| { |
| u64 val; |
| int i; |
| |
| if (!ppd->link_speed_supported) { |
| /* no buffer credits for this port */ |
| for (i = 1; i < 8; i++) |
| qib_write_kreg_port(ppd, krp_rxcreditvl0 + i, 0); |
| qib_write_kreg_port(ppd, krp_ibcctrl_b, 0); |
| qib_write_kreg(ppd->dd, kr_scratch, 0); |
| return; |
| } |
| |
| /* |
| * Set the number of supported virtual lanes in IBC, |
| * for flow control packet handling on unsupported VLs |
| */ |
| val = qib_read_kreg_port(ppd, krp_ibsdtestiftx); |
| val &= ~SYM_MASK(IB_SDTEST_IF_TX_0, VL_CAP); |
| val |= (u64)(ppd->vls_supported - 1) << |
| SYM_LSB(IB_SDTEST_IF_TX_0, VL_CAP); |
| qib_write_kreg_port(ppd, krp_ibsdtestiftx, val); |
| |
| qib_write_kreg_port(ppd, krp_rcvbthqp, QIB_KD_QP); |
| |
| /* enable tx header checking */ |
| qib_write_kreg_port(ppd, krp_sendcheckcontrol, IBA7322_SENDCHK_PKEY | |
| IBA7322_SENDCHK_BTHQP | IBA7322_SENDCHK_SLID | |
| IBA7322_SENDCHK_RAW_IPV6 | IBA7322_SENDCHK_MINSZ); |
| |
| qib_write_kreg_port(ppd, krp_ncmodectrl, |
| SYM_MASK(IBNCModeCtrl_0, ScrambleCapLocal)); |
| |
| /* |
| * Unconditionally clear the bufmask bits. If SDMA is |
| * enabled, we'll set them appropriately later. |
| */ |
| qib_write_kreg_port(ppd, krp_senddmabufmask0, 0); |
| qib_write_kreg_port(ppd, krp_senddmabufmask1, 0); |
| qib_write_kreg_port(ppd, krp_senddmabufmask2, 0); |
| if (ppd->dd->cspec->r1) |
| ppd->p_sendctrl |= SYM_MASK(SendCtrl_0, ForceCreditUpToDate); |
| } |
| |
| /* |
| * Write the initialization per-device registers that need to be done at |
| * driver load and after reset completes (i.e., that aren't done as part |
| * of other init procedures called from qib_init.c). Also write per-port |
| * registers that are affected by overall device config, such as QP mapping |
| * Some of these should be redundant on reset, but play safe. |
| */ |
| static void write_7322_initregs(struct qib_devdata *dd) |
| { |
| struct qib_pportdata *ppd; |
| int i, pidx; |
| u64 val; |
| |
| /* Set Multicast QPs received by port 2 to map to context one. */ |
| qib_write_kreg(dd, KREG_IDX(RcvQPMulticastContext_1), 1); |
| |
| for (pidx = 0; pidx < dd->num_pports; ++pidx) { |
| unsigned n, regno; |
| unsigned long flags; |
| |
| if (dd->n_krcv_queues < 2 || |
| !dd->pport[pidx].link_speed_supported) |
| continue; |
| |
| ppd = &dd->pport[pidx]; |
| |
| /* be paranoid against later code motion, etc. */ |
| spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags); |
| ppd->p_rcvctrl |= SYM_MASK(RcvCtrl_0, RcvQPMapEnable); |
| spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags); |
| |
| /* Initialize QP to context mapping */ |
| regno = krp_rcvqpmaptable; |
| val = 0; |
| if (dd->num_pports > 1) |
| n = dd->first_user_ctxt / dd->num_pports; |
| else |
| n = dd->first_user_ctxt - 1; |
| for (i = 0; i < 32; ) { |
| unsigned ctxt; |
| |
| if (dd->num_pports > 1) |
| ctxt = (i % n) * dd->num_pports + pidx; |
| else if (i % n) |
| ctxt = (i % n) + 1; |
| else |
| ctxt = ppd->hw_pidx; |
| val |= ctxt << (5 * (i % 6)); |
| i++; |
| if (i % 6 == 0) { |
| qib_write_kreg_port(ppd, regno, val); |
| val = 0; |
| regno++; |
| } |
| } |
| qib_write_kreg_port(ppd, regno, val); |
| } |
| |
| /* |
| * Setup up interrupt mitigation for kernel contexts, but |
| * not user contexts (user contexts use interrupts when |
| * stalled waiting for any packet, so want those interrupts |
| * right away). |
| */ |
| for (i = 0; i < dd->first_user_ctxt; i++) { |
| dd->cspec->rcvavail_timeout[i] = rcv_int_timeout; |
| qib_write_kreg(dd, kr_rcvavailtimeout + i, rcv_int_timeout); |
| } |
| |
| /* |
| * Initialize as (disabled) rcvflow tables. Application code |
| * will setup each flow as it uses the flow. |
| * Doesn't clear any of the error bits that might be set. |
| */ |
| val = TIDFLOW_ERRBITS; /* these are W1C */ |
| for (i = 0; i < dd->cfgctxts; i++) { |
| int flow; |
| for (flow = 0; flow < NUM_TIDFLOWS_CTXT; flow++) |
| qib_write_ureg(dd, ur_rcvflowtable+flow, val, i); |
| } |
| |
| /* |
| * dual cards init to dual port recovery, single port cards to |
| * the one port. Dual port cards may later adjust to 1 port, |
| * and then back to dual port if both ports are connected |
| * */ |
| if (dd->num_pports) |
| setup_7322_link_recovery(dd->pport, dd->num_pports > 1); |
| } |
| |
| static int qib_init_7322_variables(struct qib_devdata *dd) |
| { |
| struct qib_pportdata *ppd; |
| unsigned features, pidx, sbufcnt; |
| int ret, mtu; |
| u32 sbufs, updthresh; |
| |
| /* pport structs are contiguous, allocated after devdata */ |
| ppd = (struct qib_pportdata *)(dd + 1); |
| dd->pport = ppd; |
| ppd[0].dd = dd; |
| ppd[1].dd = dd; |
| |
| dd->cspec = (struct qib_chip_specific *)(ppd + 2); |
| |
| ppd[0].cpspec = (struct qib_chippport_specific *)(dd->cspec + 1); |
| ppd[1].cpspec = &ppd[0].cpspec[1]; |
| ppd[0].cpspec->ppd = &ppd[0]; /* for autoneg_7322_work() */ |
| ppd[1].cpspec->ppd = &ppd[1]; /* for autoneg_7322_work() */ |
| |
| spin_lock_init(&dd->cspec->rcvmod_lock); |
| spin_lock_init(&dd->cspec->gpio_lock); |
| |
| /* we haven't yet set QIB_PRESENT, so use read directly */ |
| dd->revision = readq(&dd->kregbase[kr_revision]); |
| |
| if ((dd->revision & 0xffffffffU) == 0xffffffffU) { |
| qib_dev_err(dd, "Revision register read failure, " |
| "giving up initialization\n"); |
| ret = -ENODEV; |
| goto bail; |
| } |
| dd->flags |= QIB_PRESENT; /* now register routines work */ |
| |
| dd->majrev = (u8) SYM_FIELD(dd->revision, Revision_R, ChipRevMajor); |
| dd->minrev = (u8) SYM_FIELD(dd->revision, Revision_R, ChipRevMinor); |
| dd->cspec->r1 = dd->minrev == 1; |
| |
| get_7322_chip_params(dd); |
| features = qib_7322_boardname(dd); |
| |
| /* now that piobcnt2k and 4k set, we can allocate these */ |
| sbufcnt = dd->piobcnt2k + dd->piobcnt4k + |
| NUM_VL15_BUFS + BITS_PER_LONG - 1; |
| sbufcnt /= BITS_PER_LONG; |
| dd->cspec->sendchkenable = kmalloc(sbufcnt * |
| sizeof(*dd->cspec->sendchkenable), GFP_KERNEL); |
| dd->cspec->sendgrhchk = kmalloc(sbufcnt * |
| sizeof(*dd->cspec->sendgrhchk), GFP_KERNEL); |
| dd->cspec->sendibchk = kmalloc(sbufcnt * |
| sizeof(*dd->cspec->sendibchk), GFP_KERNEL); |
| if (!dd->cspec->sendchkenable || !dd->cspec->sendgrhchk || |
| !dd->cspec->sendibchk) { |
| qib_dev_err(dd, "Failed allocation for hdrchk bitmaps\n"); |
| ret = -ENOMEM; |
| goto bail; |
| } |
| |
| ppd = dd->pport; |
| |
| /* |
| * GPIO bits for TWSI data and clock, |
| * used for serial EEPROM. |
| */ |
| dd->gpio_sda_num = _QIB_GPIO_SDA_NUM; |
| dd->gpio_scl_num = _QIB_GPIO_SCL_NUM; |
| dd->twsi_eeprom_dev = QIB_TWSI_EEPROM_DEV; |
| |
| dd->flags |= QIB_HAS_INTX | QIB_HAS_LINK_LATENCY | |
| QIB_NODMA_RTAIL | QIB_HAS_VLSUPP | QIB_HAS_HDRSUPP | |
| QIB_HAS_THRESH_UPDATE | |
| (sdma_idle_cnt ? QIB_HAS_SDMA_TIMEOUT : 0); |
| dd->flags |= qib_special_trigger ? |
| QIB_USE_SPCL_TRIG : QIB_HAS_SEND_DMA; |
| |
| /* |
| * Setup initial values. These may change when PAT is enabled, but |
| * we need these to do initial chip register accesses. |
| */ |
| qib_7322_set_baseaddrs(dd); |
| |
| mtu = ib_mtu_enum_to_int(qib_ibmtu); |
| if (mtu == -1) |
| mtu = QIB_DEFAULT_MTU; |
| |
| dd->cspec->int_enable_mask = QIB_I_BITSEXTANT; |
| /* all hwerrors become interrupts, unless special purposed */ |
| dd->cspec->hwerrmask = ~0ULL; |
| /* link_recovery setup causes these errors, so ignore them, |
| * other than clearing them when they occur */ |
| dd->cspec->hwerrmask &= |
| ~(SYM_MASK(HwErrMask, IBSerdesPClkNotDetectMask_0) | |
| SYM_MASK(HwErrMask, IBSerdesPClkNotDetectMask_1) | |
| HWE_MASK(LATriggered)); |
| |
| for (pidx = 0; pidx < NUM_IB_PORTS; ++pidx) { |
| struct qib_chippport_specific *cp = ppd->cpspec; |
| ppd->link_speed_supported = features & PORT_SPD_CAP; |
| features >>= PORT_SPD_CAP_SHIFT; |
| if (!ppd->link_speed_supported) { |
| /* single port mode (7340, or configured) */ |
| dd->skip_kctxt_mask |= 1 << pidx; |
| if (pidx == 0) { |
| /* Make sure port is disabled. */ |
| qib_write_kreg_port(ppd, krp_rcvctrl, 0); |
| qib_write_kreg_port(ppd, krp_ibcctrl_a, 0); |
| ppd[0] = ppd[1]; |
| dd->cspec->hwerrmask &= ~(SYM_MASK(HwErrMask, |
| IBSerdesPClkNotDetectMask_0) |
| | SYM_MASK(HwErrMask, |
| SDmaMemReadErrMask_0)); |
| dd->cspec->int_enable_mask &= ~( |
| SYM_MASK(IntMask, SDmaCleanupDoneMask_0) | |
| SYM_MASK(IntMask, SDmaIdleIntMask_0) | |
| SYM_MASK(IntMask, SDmaProgressIntMask_0) | |
| SYM_MASK(IntMask, SDmaIntMask_0) | |
| SYM_MASK(IntMask, ErrIntMask_0) | |
| SYM_MASK(IntMask, SendDoneIntMask_0)); |
| } else { |
| /* Make sure port is disabled. */ |
| qib_write_kreg_port(ppd, krp_rcvctrl, 0); |
| qib_write_kreg_port(ppd, krp_ibcctrl_a, 0); |
| dd->cspec->hwerrmask &= ~(SYM_MASK(HwErrMask, |
| IBSerdesPClkNotDetectMask_1) |
| | SYM_MASK(HwErrMask, |
| SDmaMemReadErrMask_1)); |
| dd->cspec->int_enable_mask &= ~( |
| SYM_MASK(IntMask, SDmaCleanupDoneMask_1) | |
| SYM_MASK(IntMask, SDmaIdleIntMask_1) | |
| SYM_MASK(IntMask, SDmaProgressIntMask_1) | |
| SYM_MASK(IntMask, SDmaIntMask_1) | |
| SYM_MASK(IntMask, ErrIntMask_1) | |
| SYM_MASK(IntMask, SendDoneIntMask_1)); |
| } |
| continue; |
| } |
| |
| dd->num_pports++; |
| qib_init_pportdata(ppd, dd, pidx, dd->num_pports); |
| |
| ppd->link_width_supported = IB_WIDTH_1X | IB_WIDTH_4X; |
| ppd->link_width_enabled = IB_WIDTH_4X; |
| ppd->link_speed_enabled = ppd->link_speed_supported; |
| /* |
| * Set the initial values to reasonable default, will be set |
| * for real when link is up. |
| */ |
| ppd->link_width_active = IB_WIDTH_4X; |
| ppd->link_speed_active = QIB_IB_SDR; |
| ppd->delay_mult = ib_rate_to_delay[IB_RATE_10_GBPS]; |
| switch (qib_num_cfg_vls) { |
| case 1: |
| ppd->vls_supported = IB_VL_VL0; |
| break; |
| case 2: |
| ppd->vls_supported = IB_VL_VL0_1; |
| break; |
| default: |
| qib_devinfo(dd->pcidev, |
| "Invalid num_vls %u, using 4 VLs\n", |
| qib_num_cfg_vls); |
| qib_num_cfg_vls = 4; |
| /* fall through */ |
| case 4: |
| ppd->vls_supported = IB_VL_VL0_3; |
| break; |
| case 8: |
| if (mtu <= 2048) |
| ppd->vls_supported = IB_VL_VL0_7; |
| else { |
| qib_devinfo(dd->pcidev, |
| "Invalid num_vls %u for MTU %d " |
| ", using 4 VLs\n", |
| qib_num_cfg_vls, mtu); |
| ppd->vls_supported = IB_VL_VL0_3; |
| qib_num_cfg_vls = 4; |
| } |
| break; |
| } |
| ppd->vls_operational = ppd->vls_supported; |
| |
| init_waitqueue_head(&cp->autoneg_wait); |
| INIT_DELAYED_WORK(&cp->autoneg_work, |
| autoneg_7322_work); |
| if (ppd->dd->cspec->r1) |
| INIT_DELAYED_WORK(&cp->ipg_work, ipg_7322_work); |
| |
| /* |
| * For Mez and similar cards, no qsfp info, so do |
| * the "cable info" setup here. Can be overridden |
| * in adapter-specific routines. |
| */ |
| if (!(dd->flags & QIB_HAS_QSFP)) { |
| if (!IS_QMH(dd) && !IS_QME(dd)) |
| qib_devinfo(dd->pcidev, "IB%u:%u: " |
| "Unknown mezzanine card type\n", |
| dd->unit, ppd->port); |
| cp->h1_val = IS_QMH(dd) ? H1_FORCE_QMH : H1_FORCE_QME; |
| /* |
| * Choose center value as default tx serdes setting |
| * until changed through module parameter. |
| */ |
| ppd->cpspec->no_eep = IS_QMH(dd) ? |
| TXDDS_TABLE_SZ + 2 : TXDDS_TABLE_SZ + 4; |
| } else |
| cp->h1_val = H1_FORCE_VAL; |
| |
| /* Avoid writes to chip for mini_init */ |
| if (!qib_mini_init) |
| write_7322_init_portregs(ppd); |
| |
| init_timer(&cp->chase_timer); |
| cp->chase_timer.function = reenable_chase; |
| cp->chase_timer.data = (unsigned long)ppd; |
| |
| ppd++; |
| } |
| |
| dd->rcvhdrentsize = qib_rcvhdrentsize ? |
| qib_rcvhdrentsize : QIB_RCVHDR_ENTSIZE; |
| dd->rcvhdrsize = qib_rcvhdrsize ? |
| qib_rcvhdrsize : QIB_DFLT_RCVHDRSIZE; |
| dd->rhf_offset = dd->rcvhdrentsize - sizeof(u64) / sizeof(u32); |
| |
| /* we always allocate at least 2048 bytes for eager buffers */ |
| dd->rcvegrbufsize = max(mtu, 2048); |
| BUG_ON(!is_power_of_2(dd->rcvegrbufsize)); |
| dd->rcvegrbufsize_shift = ilog2(dd->rcvegrbufsize); |
| |
| qib_7322_tidtemplate(dd); |
| |
| /* |
| * We can request a receive interrupt for 1 or |
| * more packets from current offset. |
| */ |
| dd->rhdrhead_intr_off = |
| (u64) rcv_int_count << IBA7322_HDRHEAD_PKTINT_SHIFT; |
| |
| /* setup the stats timer; the add_timer is done at end of init */ |
| init_timer(&dd->stats_timer); |
| dd->stats_timer.function = qib_get_7322_faststats; |
| dd->stats_timer.data = (unsigned long) dd; |
| |
| dd->ureg_align = 0x10000; /* 64KB alignment */ |
| |
| dd->piosize2kmax_dwords = dd->piosize2k >> 2; |
| |
| qib_7322_config_ctxts(dd); |
| qib_set_ctxtcnt(dd); |
| |
| if (qib_wc_pat) { |
| resource_size_t vl15off; |
| /* |
| * We do not set WC on the VL15 buffers to avoid |
| * a rare problem with unaligned writes from |
| * interrupt-flushed store buffers, so we need |
| * to map those separately here. We can't solve |
| * this for the rarely used mtrr case. |
| */ |
| ret = init_chip_wc_pat(dd, 0); |
| if (ret) |
| goto bail; |
| |
| /* vl15 buffers start just after the 4k buffers */ |
| vl15off = dd->physaddr + (dd->piobufbase >> 32) + |
| dd->piobcnt4k * dd->align4k; |
| dd->piovl15base = ioremap_nocache(vl15off, |
| NUM_VL15_BUFS * dd->align4k); |
| if (!dd->piovl15base) |
| goto bail; |
| } |
| qib_7322_set_baseaddrs(dd); /* set chip access pointers now */ |
| |
| ret = 0; |
| if (qib_mini_init) |
| goto bail; |
| if (!dd->num_pports) { |
| qib_dev_err(dd, "No ports enabled, giving up initialization\n"); |
| goto bail; /* no error, so can still figure out why err */ |
| } |
| |
| write_7322_initregs(dd); |
| ret = qib_create_ctxts(dd); |
| init_7322_cntrnames(dd); |
| |
| updthresh = 8U; /* update threshold */ |
| |
| /* use all of 4KB buffers for the kernel SDMA, zero if !SDMA. |
| * reserve the update threshold amount for other kernel use, such |
| * as sending SMI, MAD, and ACKs, or 3, whichever is greater, |
| * unless we aren't enabling SDMA, in which case we want to use |
| * all the 4k bufs for the kernel. |
| * if this was less than the update threshold, we could wait |
| * a long time for an update. Coded this way because we |
| * sometimes change the update threshold for various reasons, |
| * and we want this to remain robust. |
| */ |
| if (dd->flags & QIB_HAS_SEND_DMA) { |
| dd->cspec->sdmabufcnt = dd->piobcnt4k; |
| sbufs = updthresh > 3 ? updthresh : 3; |
| } else { |
| dd->cspec->sdmabufcnt = 0; |
| sbufs = dd->piobcnt4k; |
| } |
| dd->cspec->lastbuf_for_pio = dd->piobcnt2k + dd->piobcnt4k - |
| dd->cspec->sdmabufcnt; |
| dd->lastctxt_piobuf = dd->cspec->lastbuf_for_pio - sbufs; |
| dd->cspec->lastbuf_for_pio--; /* range is <= , not < */ |
| dd->pbufsctxt = (dd->cfgctxts > dd->first_user_ctxt) ? |
| dd->lastctxt_piobuf / (dd->cfgctxts - dd->first_user_ctxt) : 0; |
| |
| /* |
| * If we have 16 user contexts, we will have 7 sbufs |
| * per context, so reduce the update threshold to match. We |
| * want to update before we actually run out, at low pbufs/ctxt |
| * so give ourselves some margin. |
| */ |
| if (dd->pbufsctxt >= 2 && dd->pbufsctxt - 2 < updthresh) |
| updthresh = dd->pbufsctxt - 2; |
| dd->cspec->updthresh_dflt = updthresh; |
| dd->cspec->updthresh = updthresh; |
| |
| /* before full enable, no interrupts, no locking needed */ |
| dd->sendctrl |= ((updthresh & SYM_RMASK(SendCtrl, AvailUpdThld)) |
| << SYM_LSB(SendCtrl, AvailUpdThld)) | |
| SYM_MASK(SendCtrl, SendBufAvailPad64Byte); |
| |
| dd->psxmitwait_supported = 1; |
| dd->psxmitwait_check_rate = QIB_7322_PSXMITWAIT_CHECK_RATE; |
| bail: |
| if (!dd->ctxtcnt) |
| dd->ctxtcnt = 1; /* for other initialization code */ |
| |
| return ret; |
| } |
| |
| static u32 __iomem *qib_7322_getsendbuf(struct qib_pportdata *ppd, u64 pbc, |
| u32 *pbufnum) |
| { |
| u32 first, last, plen = pbc & QIB_PBC_LENGTH_MASK; |
| struct qib_devdata *dd = ppd->dd; |
| |
| /* last is same for 2k and 4k, because we use 4k if all 2k busy */ |
| if (pbc & PBC_7322_VL15_SEND) { |
| first = dd->piobcnt2k + dd->piobcnt4k + ppd->hw_pidx; |
| last = first; |
| } else { |
| if ((plen + 1) > dd->piosize2kmax_dwords) |
| first = dd->piobcnt2k; |
| else |
| first = 0; |
| last = dd->cspec->lastbuf_for_pio; |
| } |
| return qib_getsendbuf_range(dd, pbufnum, first, last); |
| } |
| |
| static void qib_set_cntr_7322_sample(struct qib_pportdata *ppd, u32 intv, |
| u32 start) |
| { |
| qib_write_kreg_port(ppd, krp_psinterval, intv); |
| qib_write_kreg_port(ppd, krp_psstart, start); |
| } |
| |
| /* |
| * Must be called with sdma_lock held, or before init finished. |
| */ |
| static void qib_sdma_set_7322_desc_cnt(struct qib_pportdata *ppd, unsigned cnt) |
| { |
| qib_write_kreg_port(ppd, krp_senddmadesccnt, cnt); |
| } |
| |
| static struct sdma_set_state_action sdma_7322_action_table[] = { |
| [qib_sdma_state_s00_hw_down] = { |
| .go_s99_running_tofalse = 1, |
| .op_enable = 0, |
| .op_intenable = 0, |
| .op_halt = 0, |
| .op_drain = 0, |
| }, |
| [qib_sdma_state_s10_hw_start_up_wait] = { |
| .op_enable = 0, |
| .op_intenable = 1, |
| .op_halt = 1, |
| .op_drain = 0, |
| }, |
| [qib_sdma_state_s20_idle] = { |
| .op_enable = 1, |
| .op_intenable = 1, |
| .op_halt = 1, |
| .op_drain = 0, |
| }, |
| [qib_sdma_state_s30_sw_clean_up_wait] = { |
| .op_enable = 0, |
| .op_intenable = 1, |
| .op_halt = 1, |
| .op_drain = 0, |
| }, |
| [qib_sdma_state_s40_hw_clean_up_wait] = { |
| .op_enable = 1, |
| .op_intenable = 1, |
| .op_halt = 1, |
| .op_drain = 0, |
| }, |
| [qib_sdma_state_s50_hw_halt_wait] = { |
| .op_enable = 1, |
| .op_intenable = 1, |
| .op_halt = 1, |
| .op_drain = 1, |
| }, |
| [qib_sdma_state_s99_running] = { |
| .op_enable = 1, |
| .op_intenable = 1, |
| .op_halt = 0, |
| .op_drain = 0, |
| .go_s99_running_totrue = 1, |
| }, |
| }; |
| |
| static void qib_7322_sdma_init_early(struct qib_pportdata *ppd) |
| { |
| ppd->sdma_state.set_state_action = sdma_7322_action_table; |
| } |
| |
| static int init_sdma_7322_regs(struct qib_pportdata *ppd) |
| { |
| struct qib_devdata *dd = ppd->dd; |
| unsigned lastbuf, erstbuf; |
| u64 senddmabufmask[3] = { 0 }; |
| int n, ret = 0; |
| |
| qib_write_kreg_port(ppd, krp_senddmabase, ppd->sdma_descq_phys); |
| qib_sdma_7322_setlengen(ppd); |
| qib_sdma_update_7322_tail(ppd, 0); /* Set SendDmaTail */ |
| qib_write_kreg_port(ppd, krp_senddmareloadcnt, sdma_idle_cnt); |
| qib_write_kreg_port(ppd, krp_senddmadesccnt, 0); |
| qib_write_kreg_port(ppd, krp_senddmaheadaddr, ppd->sdma_head_phys); |
| |
| if (dd->num_pports) |
| n = dd->cspec->sdmabufcnt / dd->num_pports; /* no remainder */ |
| else |
| n = dd->cspec->sdmabufcnt; /* failsafe for init */ |
| erstbuf = (dd->piobcnt2k + dd->piobcnt4k) - |
| ((dd->num_pports == 1 || ppd->port == 2) ? n : |
| dd->cspec->sdmabufcnt); |
| lastbuf = erstbuf + n; |
| |
| ppd->sdma_state.first_sendbuf = erstbuf; |
| ppd->sdma_state.last_sendbuf = lastbuf; |
| for (; erstbuf < lastbuf; ++erstbuf) { |
| unsigned word = erstbuf / BITS_PER_LONG; |
| unsigned bit = erstbuf & (BITS_PER_LONG - 1); |
| |
| BUG_ON(word >= 3); |
| senddmabufmask[word] |= 1ULL << bit; |
| } |
| qib_write_kreg_port(ppd, krp_senddmabufmask0, senddmabufmask[0]); |
| qib_write_kreg_port(ppd, krp_senddmabufmask1, senddmabufmask[1]); |
| qib_write_kreg_port(ppd, krp_senddmabufmask2, senddmabufmask[2]); |
| return ret; |
| } |
| |
| /* sdma_lock must be held */ |
| static u16 qib_sdma_7322_gethead(struct qib_pportdata *ppd) |
| { |
| struct qib_devdata *dd = ppd->dd; |
| int sane; |
| int use_dmahead; |
| u16 swhead; |
| u16 swtail; |
| u16 cnt; |
| u16 hwhead; |
| |
| use_dmahead = __qib_sdma_running(ppd) && |
| (dd->flags & QIB_HAS_SDMA_TIMEOUT); |
| retry: |
| hwhead = use_dmahead ? |
| (u16) le64_to_cpu(*ppd->sdma_head_dma) : |
| (u16) qib_read_kreg_port(ppd, krp_senddmahead); |
| |
| swhead = ppd->sdma_descq_head; |
| swtail = ppd->sdma_descq_tail; |
| cnt = ppd->sdma_descq_cnt; |
| |
| if (swhead < swtail) |
| /* not wrapped */ |
| sane = (hwhead >= swhead) & (hwhead <= swtail); |
| else if (swhead > swtail) |
| /* wrapped around */ |
| sane = ((hwhead >= swhead) && (hwhead < cnt)) || |
| (hwhead <= swtail); |
| else |
| /* empty */ |
| sane = (hwhead == swhead); |
| |
| if (unlikely(!sane)) { |
| if (use_dmahead) { |
| /* try one more time, directly from the register */ |
| use_dmahead = 0; |
| goto retry; |
| } |
| /* proceed as if no progress */ |
| hwhead = swhead; |
| } |
| |
| return hwhead; |
| } |
| |
| static int qib_sdma_7322_busy(struct qib_pportdata *ppd) |
| { |
| u64 hwstatus = qib_read_kreg_port(ppd, krp_senddmastatus); |
| |
| return (hwstatus & SYM_MASK(SendDmaStatus_0, ScoreBoardDrainInProg)) || |
| (hwstatus & SYM_MASK(SendDmaStatus_0, HaltInProg)) || |
| !(hwstatus & SYM_MASK(SendDmaStatus_0, InternalSDmaHalt)) || |
| !(hwstatus & SYM_MASK(SendDmaStatus_0, ScbEmpty)); |
| } |
| |
| /* |
| * Compute the amount of delay before sending the next packet if the |
| * port's send rate differs from the static rate set for the QP. |
| * The delay affects the next packet and the amount of the delay is |
| * based on the length of the this packet. |
| */ |
| static u32 qib_7322_setpbc_control(struct qib_pportdata *ppd, u32 plen, |
| u8 srate, u8 vl) |
| { |
| u8 snd_mult = ppd->delay_mult; |
| u8 rcv_mult = ib_rate_to_delay[srate]; |
| u32 ret; |
| |
| ret = rcv_mult > snd_mult ? ((plen + 1) >> 1) * snd_mult : 0; |
| |
| /* Indicate VL15, else set the VL in the control word */ |
| if (vl == 15) |
| ret |= PBC_7322_VL15_SEND_CTRL; |
| else |
| ret |= vl << PBC_VL_NUM_LSB; |
| ret |= ((u32)(ppd->hw_pidx)) << PBC_PORT_SEL_LSB; |
| |
| return ret; |
| } |
| |
| /* |
| * Enable the per-port VL15 send buffers for use. |
| * They follow the rest of the buffers, without a config parameter. |
| * This was in initregs, but that is done before the shadow |
| * is set up, and this has to be done after the shadow is |
| * set up. |
| */ |
| static void qib_7322_initvl15_bufs(struct qib_devdata *dd) |
| { |
| unsigned vl15bufs; |
| |
| vl15bufs = dd->piobcnt2k + dd->piobcnt4k; |
| qib_chg_pioavailkernel(dd, vl15bufs, NUM_VL15_BUFS, |
| TXCHK_CHG_TYPE_KERN, NULL); |
| } |
| |
| static void qib_7322_init_ctxt(struct qib_ctxtdata *rcd) |
| { |
| if (rcd->ctxt < NUM_IB_PORTS) { |
| if (rcd->dd->num_pports > 1) { |
| rcd->rcvegrcnt = KCTXT0_EGRCNT / 2; |
| rcd->rcvegr_tid_base = rcd->ctxt ? rcd->rcvegrcnt : 0; |
| } else { |
| rcd->rcvegrcnt = KCTXT0_EGRCNT; |
| rcd->rcvegr_tid_base = 0; |
| } |
| } else { |
| rcd->rcvegrcnt = rcd->dd->cspec->rcvegrcnt; |
| rcd->rcvegr_tid_base = KCTXT0_EGRCNT + |
| (rcd->ctxt - NUM_IB_PORTS) * rcd->rcvegrcnt; |
| } |
| } |
| |
| #define QTXSLEEPS 5000 |
| static void qib_7322_txchk_change(struct qib_devdata *dd, u32 start, |
| u32 len, u32 which, struct qib_ctxtdata *rcd) |
| { |
| int i; |
| const int last = start + len - 1; |
| const int lastr = last / BITS_PER_LONG; |
| u32 sleeps = 0; |
| int wait = rcd != NULL; |
| unsigned long flags; |
| |
| while (wait) { |
| unsigned long shadow; |
| int cstart, previ = -1; |
| |
| /* |
| * when flipping from kernel to user, we can't change |
| * the checking type if the buffer is allocated to the |
| * driver. It's OK the other direction, because it's |
| * from close, and we have just disarm'ed all the |
| * buffers. All the kernel to kernel changes are also |
| * OK. |
| */ |
| for (cstart = start; cstart <= last; cstart++) { |
| i = ((2 * cstart) + QLOGIC_IB_SENDPIOAVAIL_BUSY_SHIFT) |
| / BITS_PER_LONG; |
| if (i != previ) { |
| shadow = (unsigned long) |
| le64_to_cpu(dd->pioavailregs_dma[i]); |
| previ = i; |
| } |
| if (test_bit(((2 * cstart) + |
| QLOGIC_IB_SENDPIOAVAIL_BUSY_SHIFT) |
| % BITS_PER_LONG, &shadow)) |
| break; |
| } |
| |
| if (cstart > last) |
| break; |
| |
| if (sleeps == QTXSLEEPS) |
| break; |
| /* make sure we see an updated copy next time around */ |
| sendctrl_7322_mod(dd->pport, QIB_SENDCTRL_AVAIL_BLIP); |
| sleeps++; |
| msleep(20); |
| } |
| |
| switch (which) { |
| case TXCHK_CHG_TYPE_DIS1: |
| /* |
| * disable checking on a range; used by diags; just |
| * one buffer, but still written generically |
| */ |
| for (i = start; i <= last; i++) |
| clear_bit(i, dd->cspec->sendchkenable); |
| break; |
| |
| case TXCHK_CHG_TYPE_ENAB1: |
| /* |
| * (re)enable checking on a range; used by diags; just |
| * one buffer, but still written generically; read |
| * scratch to be sure buffer actually triggered, not |
| * just flushed from processor. |
| */ |
| qib_read_kreg32(dd, kr_scratch); |
| for (i = start; i <= last; i++) |
| set_bit(i, dd->cspec->sendchkenable); |
| break; |
| |
| case TXCHK_CHG_TYPE_KERN: |
| /* usable by kernel */ |
| for (i = start; i <= last; i++) { |
| set_bit(i, dd->cspec->sendibchk); |
| clear_bit(i, dd->cspec->sendgrhchk); |
| } |
| spin_lock_irqsave(&dd->uctxt_lock, flags); |
| /* see if we need to raise avail update threshold */ |
| for (i = dd->first_user_ctxt; |
| dd->cspec->updthresh != dd->cspec->updthresh_dflt |
| && i < dd->cfgctxts; i++) |
| if (dd->rcd[i] && dd->rcd[i]->subctxt_cnt && |
| ((dd->rcd[i]->piocnt / dd->rcd[i]->subctxt_cnt) - 1) |
| < dd->cspec->updthresh_dflt) |
| break; |
| spin_unlock_irqrestore(&dd->uctxt_lock, flags); |
| if (i == dd->cfgctxts) { |
| spin_lock_irqsave(&dd->sendctrl_lock, flags); |
| dd->cspec->updthresh = dd->cspec->updthresh_dflt; |
| dd->sendctrl &= ~SYM_MASK(SendCtrl, AvailUpdThld); |
| dd->sendctrl |= (dd->cspec->updthresh & |
| SYM_RMASK(SendCtrl, AvailUpdThld)) << |
| SYM_LSB(SendCtrl, AvailUpdThld); |
| spin_unlock_irqrestore(&dd->sendctrl_lock, flags); |
| sendctrl_7322_mod(dd->pport, QIB_SENDCTRL_AVAIL_BLIP); |
| } |
| break; |
| |
| case TXCHK_CHG_TYPE_USER: |
| /* for user process */ |
| for (i = start; i <= last; i++) { |
| clear_bit(i, dd->cspec->sendibchk); |
| set_bit(i, dd->cspec->sendgrhchk); |
| } |
| spin_lock_irqsave(&dd->sendctrl_lock, flags); |
| if (rcd && rcd->subctxt_cnt && ((rcd->piocnt |
| / rcd->subctxt_cnt) - 1) < dd->cspec->updthresh) { |
| dd->cspec->updthresh = (rcd->piocnt / |
| rcd->subctxt_cnt) - 1; |
| dd->sendctrl &= ~SYM_MASK(SendCtrl, AvailUpdThld); |
| dd->sendctrl |= (dd->cspec->updthresh & |
| SYM_RMASK(SendCtrl, AvailUpdThld)) |
| << SYM_LSB(SendCtrl, AvailUpdThld); |
| spin_unlock_irqrestore(&dd->sendctrl_lock, flags); |
| sendctrl_7322_mod(dd->pport, QIB_SENDCTRL_AVAIL_BLIP); |
| } else |
| spin_unlock_irqrestore(&dd->sendctrl_lock, flags); |
| break; |
| |
| default: |
| break; |
| } |
| |
| for (i = start / BITS_PER_LONG; which >= 2 && i <= lastr; ++i) |
| qib_write_kreg(dd, kr_sendcheckmask + i, |
| dd->cspec->sendchkenable[i]); |
| |
| for (i = start / BITS_PER_LONG; which < 2 && i <= lastr; ++i) { |
| qib_write_kreg(dd, kr_sendgrhcheckmask + i, |
| dd->cspec->sendgrhchk[i]); |
| qib_write_kreg(dd, kr_sendibpktmask + i, |
| dd->cspec->sendibchk[i]); |
| } |
| |
| /* |
| * Be sure whatever we did was seen by the chip and acted upon, |
| * before we return. Mostly important for which >= 2. |
| */ |
| qib_read_kreg32(dd, kr_scratch); |
| } |
| |
| |
| /* useful for trigger analyzers, etc. */ |
| static void writescratch(struct qib_devdata *dd, u32 val) |
| { |
| qib_write_kreg(dd, kr_scratch, val); |
| } |
| |
| /* Dummy for now, use chip regs soon */ |
| static int qib_7322_tempsense_rd(struct qib_devdata *dd, int regnum) |
| { |
| return -ENXIO; |
| } |
| |
| /** |
| * qib_init_iba7322_funcs - set up the chip-specific function pointers |
| * @dev: the pci_dev for qlogic_ib device |
| * @ent: pci_device_id struct for this dev |
| * |
| * Also allocates, inits, and returns the devdata struct for this |
| * device instance |
| * |
| * This is global, and is called directly at init to set up the |
| * chip-specific function pointers for later use. |
| */ |
| struct qib_devdata *qib_init_iba7322_funcs(struct pci_dev *pdev, |
| const struct pci_device_id *ent) |
| { |
| struct qib_devdata *dd; |
| int ret, i; |
| u32 tabsize, actual_cnt = 0; |
| |
| dd = qib_alloc_devdata(pdev, |
| NUM_IB_PORTS * sizeof(struct qib_pportdata) + |
| sizeof(struct qib_chip_specific) + |
| NUM_IB_PORTS * sizeof(struct qib_chippport_specific)); |
| if (IS_ERR(dd)) |
| goto bail; |
| |
| dd->f_bringup_serdes = qib_7322_bringup_serdes; |
| dd->f_cleanup = qib_setup_7322_cleanup; |
| dd->f_clear_tids = qib_7322_clear_tids; |
| dd->f_free_irq = qib_7322_free_irq; |
| dd->f_get_base_info = qib_7322_get_base_info; |
| dd->f_get_msgheader = qib_7322_get_msgheader; |
| dd->f_getsendbuf = qib_7322_getsendbuf; |
| dd->f_gpio_mod = gpio_7322_mod; |
| dd->f_eeprom_wen = qib_7322_eeprom_wen; |
| dd->f_hdrqempty = qib_7322_hdrqempty; |
| dd->f_ib_updown = qib_7322_ib_updown; |
| dd->f_init_ctxt = qib_7322_init_ctxt; |
| dd->f_initvl15_bufs = qib_7322_initvl15_bufs; |
| dd->f_intr_fallback = qib_7322_intr_fallback; |
| dd->f_late_initreg = qib_late_7322_initreg; |
| dd->f_setpbc_control = qib_7322_setpbc_control; |
| dd->f_portcntr = qib_portcntr_7322; |
| dd->f_put_tid = qib_7322_put_tid; |
| dd->f_quiet_serdes = qib_7322_mini_quiet_serdes; |
| dd->f_rcvctrl = rcvctrl_7322_mod; |
| dd->f_read_cntrs = qib_read_7322cntrs; |
| dd->f_read_portcntrs = qib_read_7322portcntrs; |
| dd->f_reset = qib_do_7322_reset; |
| dd->f_init_sdma_regs = init_sdma_7322_regs; |
| dd->f_sdma_busy = qib_sdma_7322_busy; |
| dd->f_sdma_gethead = qib_sdma_7322_gethead; |
| dd->f_sdma_sendctrl = qib_7322_sdma_sendctrl; |
| dd->f_sdma_set_desc_cnt = qib_sdma_set_7322_desc_cnt; |
| dd->f_sdma_update_tail = qib_sdma_update_7322_tail; |
| dd->f_sendctrl = sendctrl_7322_mod; |
| dd->f_set_armlaunch = qib_set_7322_armlaunch; |
| dd->f_set_cntr_sample = qib_set_cntr_7322_sample; |
| dd->f_iblink_state = qib_7322_iblink_state; |
| dd->f_ibphys_portstate = qib_7322_phys_portstate; |
| dd->f_get_ib_cfg = qib_7322_get_ib_cfg; |
| dd->f_set_ib_cfg = qib_7322_set_ib_cfg; |
| dd->f_set_ib_loopback = qib_7322_set_loopback; |
| dd->f_get_ib_table = qib_7322_get_ib_table; |
| dd->f_set_ib_table = qib_7322_set_ib_table; |
| dd->f_set_intr_state = qib_7322_set_intr_state; |
| dd->f_setextled = qib_setup_7322_setextled; |
| dd->f_txchk_change = qib_7322_txchk_change; |
| dd->f_update_usrhead = qib_update_7322_usrhead; |
| dd->f_wantpiobuf_intr = qib_wantpiobuf_7322_intr; |
| dd->f_xgxs_reset = qib_7322_mini_pcs_reset; |
| dd->f_sdma_hw_clean_up = qib_7322_sdma_hw_clean_up; |
| dd->f_sdma_hw_start_up = qib_7322_sdma_hw_start_up; |
| dd->f_sdma_init_early = qib_7322_sdma_init_early; |
| dd->f_writescratch = writescratch; |
| dd->f_tempsense_rd = qib_7322_tempsense_rd; |
| /* |
| * Do remaining PCIe setup and save PCIe values in dd. |
| * Any error printing is already done by the init code. |
| * On return, we have the chip mapped, but chip registers |
| * are not set up until start of qib_init_7322_variables. |
| */ |
| ret = qib_pcie_ddinit(dd, pdev, ent); |
| if (ret < 0) |
| goto bail_free; |
| |
| /* initialize chip-specific variables */ |
| ret = qib_init_7322_variables(dd); |
| if (ret) |
| goto bail_cleanup; |
| |
| if (qib_mini_init || !dd->num_pports) |
| goto bail; |
| |
| /* |
| * Determine number of vectors we want; depends on port count |
| * and number of configured kernel receive queues actually used. |
| * Should also depend on whether sdma is enabled or not, but |
| * that's such a rare testing case it's not worth worrying about. |
| */ |
| tabsize = dd->first_user_ctxt + ARRAY_SIZE(irq_table); |
| for (i = 0; i < tabsize; i++) |
| if ((i < ARRAY_SIZE(irq_table) && |
| irq_table[i].port <= dd->num_pports) || |
| (i >= ARRAY_SIZE(irq_table) && |
| dd->rcd[i - ARRAY_SIZE(irq_table)])) |
| actual_cnt++; |
| /* reduce by ctxt's < 2 */ |
| if (qib_krcvq01_no_msi) |
| actual_cnt -= dd->num_pports; |
| |
| tabsize = actual_cnt; |
| dd->cspec->msix_entries = kmalloc(tabsize * |
| sizeof(struct msix_entry), GFP_KERNEL); |
| dd->cspec->msix_arg = kmalloc(tabsize * |
| sizeof(void *), GFP_KERNEL); |
| if (!dd->cspec->msix_entries || !dd->cspec->msix_arg) { |
| qib_dev_err(dd, "No memory for MSIx table\n"); |
| tabsize = 0; |
| } |
| for (i = 0; i < tabsize; i++) |
| dd->cspec->msix_entries[i].entry = i; |
| |
| if (qib_pcie_params(dd, 8, &tabsize, dd->cspec->msix_entries)) |
| qib_dev_err(dd, "Failed to setup PCIe or interrupts; " |
| "continuing anyway\n"); |
| /* may be less than we wanted, if not enough available */ |
| dd->cspec->num_msix_entries = tabsize; |
| |
| /* setup interrupt handler */ |
| qib_setup_7322_interrupt(dd, 1); |
| |
| /* clear diagctrl register, in case diags were running and crashed */ |
| qib_write_kreg(dd, kr_hwdiagctrl, 0); |
| |
| goto bail; |
| |
| bail_cleanup: |
| qib_pcie_ddcleanup(dd); |
| bail_free: |
| qib_free_devdata(dd); |
| dd = ERR_PTR(ret); |
| bail: |
| return dd; |
| } |
| |
| /* |
| * Set the table entry at the specified index from the table specifed. |
| * There are 3 * TXDDS_TABLE_SZ entries in all per port, with the first |
| * TXDDS_TABLE_SZ for SDR, the next for DDR, and the last for QDR. |
| * 'idx' below addresses the correct entry, while its 4 LSBs select the |
| * corresponding entry (one of TXDDS_TABLE_SZ) from the selected table. |
| */ |
| #define DDS_ENT_AMP_LSB 14 |
| #define DDS_ENT_MAIN_LSB 9 |
| #define DDS_ENT_POST_LSB 5 |
| #define DDS_ENT_PRE_XTRA_LSB 3 |
| #define DDS_ENT_PRE_LSB 0 |
| |
| /* |
| * Set one entry in the TxDDS table for spec'd port |
| * ridx picks one of the entries, while tp points |
| * to the appropriate table entry. |
| */ |
| static void set_txdds(struct qib_pportdata *ppd, int ridx, |
| const struct txdds_ent *tp) |
| { |
| struct qib_devdata *dd = ppd->dd; |
| u32 pack_ent; |
| int regidx; |
| |
| /* Get correct offset in chip-space, and in source table */ |
| regidx = KREG_IBPORT_IDX(IBSD_DDS_MAP_TABLE) + ridx; |
| /* |
| * We do not use qib_write_kreg_port() because it was intended |
| * only for registers in the lower "port specific" pages. |
| * So do index calculation by hand. |
| */ |
| if (ppd->hw_pidx) |
| regidx += (dd->palign / sizeof(u64)); |
| |
| pack_ent = tp->amp << DDS_ENT_AMP_LSB; |
| pack_ent |= tp->main << DDS_ENT_MAIN_LSB; |
| pack_ent |= tp->pre << DDS_ENT_PRE_LSB; |
| pack_ent |= tp->post << DDS_ENT_POST_LSB; |
| qib_write_kreg(dd, regidx, pack_ent); |
| /* Prevent back-to-back writes by hitting scratch */ |
| qib_write_kreg(ppd->dd, kr_scratch, 0); |
| } |
| |
| static const struct vendor_txdds_ent vendor_txdds[] = { |
| { /* Amphenol 1m 30awg NoEq */ |
| { 0x41, 0x50, 0x48 }, "584470002 ", |
| { 10, 0, 0, 5 }, { 10, 0, 0, 9 }, { 7, 1, 0, 13 }, |
| }, |
| { /* Amphenol 3m 28awg NoEq */ |
| { 0x41, 0x50, 0x48 }, "584470004 ", |
| { 0, 0, 0, 8 }, { 0, 0, 0, 11 }, { 0, 1, 7, 15 }, |
| }, |
| { /* Finisar 3m OM2 Optical */ |
| { 0x00, 0x90, 0x65 }, "FCBG410QB1C03-QL", |
| { 0, 0, 0, 3 }, { 0, 0, 0, 4 }, { 0, 0, 0, 13 }, |
| }, |
| { /* Finisar 30m OM2 Optical */ |
| { 0x00, 0x90, 0x65 }, "FCBG410QB1C30-QL", |
| { 0, 0, 0, 1 }, { 0, 0, 0, 5 }, { 0, 0, 0, 11 }, |
| }, |
| { /* Finisar Default OM2 Optical */ |
| { 0x00, 0x90, 0x65 }, NULL, |
| { 0, 0, 0, 2 }, { 0, 0, 0, 5 }, { 0, 0, 0, 12 }, |
| }, |
| { /* Gore 1m 30awg NoEq */ |
| { 0x00, 0x21, 0x77 }, "QSN3300-1 ", |
| { 0, 0, 0, 6 }, { 0, 0, 0, 9 }, { 0, 1, 0, 15 }, |
| }, |
| { /* Gore 2m 30awg NoEq */ |
| { 0x00, 0x21, 0x77 }, "QSN3300-2 ", |
| { 0, 0, 0, 8 }, { 0, 0, 0, 10 }, { 0, 1, 7, 15 }, |
| }, |
| { /* Gore 1m 28awg NoEq */ |
| { 0x00, 0x21, 0x77 }, "QSN3800-1 ", |
| { 0, 0, 0, 6 }, { 0, 0, 0, 8 }, { 0, 1, 0, 15 }, |
| }, |
| { /* Gore 3m 28awg NoEq */ |
| { 0x00, 0x21, 0x77 }, "QSN3800-3 ", |
| { 0, 0, 0, 9 }, { 0, 0, 0, 13 }, { 0, 1, 7, 15 }, |
| }, |
| { /* Gore 5m 24awg Eq */ |
| { 0x00, 0x21, 0x77 }, "QSN7000-5 ", |
| { 0, 0, 0, 7 }, { 0, 0, 0, 9 }, { 0, 1, 3, 15 }, |
| }, |
| { /* Gore 7m 24awg Eq */ |
| { 0x00, 0x21, 0x77 }, "QSN7000-7 ", |
| { 0, 0, 0, 9 }, { 0, 0, 0, 11 }, { 0, 2, 6, 15 }, |
| }, |
| { /* Gore 5m 26awg Eq */ |
| { 0x00, 0x21, 0x77 }, "QSN7600-5 ", |
| { 0, 0, 0, 8 }, { 0, 0, 0, 11 }, { 0, 1, 9, 13 }, |
| }, |
| { /* Gore 7m 26awg Eq */ |
| { 0x00, 0x21, 0x77 }, "QSN7600-7 ", |
| { 0, 0, 0, 8 }, { 0, 0, 0, 11 }, { 10, 1, 8, 15 }, |
| }, |
| { /* Intersil 12m 24awg Active */ |
| { 0x00, 0x30, 0xB4 }, "QLX4000CQSFP1224", |
| { 0, 0, 0, 2 }, { 0, 0, 0, 5 }, { 0, 3, 0, 9 }, |
| }, |
| { /* Intersil 10m 28awg Active */ |
| { 0x00, 0x30, 0xB4 }, "QLX4000CQSFP1028", |
| { 0, 0, 0, 6 }, { 0, 0, 0, 4 }, { 0, 2, 0, 2 }, |
| }, |
| { /* Intersil 7m 30awg Active */ |
| { 0x00, 0x30, 0xB4 }, "QLX4000CQSFP0730", |
| { 0, 0, 0, 6 }, { 0, 0, 0, 4 }, { 0, 1, 0, 3 }, |
| }, |
| { /* Intersil 5m 32awg Active */ |
| { 0x00, 0x30, 0xB4 }, "QLX4000CQSFP0532", |
| { 0, 0, 0, 6 }, { 0, 0, 0, 6 }, { 0, 2, 0, 8 }, |
| }, |
| { /* Intersil Default Active */ |
| { 0x00, 0x30, 0xB4 }, NULL, |
| { 0, 0, 0, 6 }, { 0, 0, 0, 5 }, { 0, 2, 0, 5 }, |
| }, |
| { /* Luxtera 20m Active Optical */ |
| { 0x00, 0x25, 0x63 }, NULL, |
| { 0, 0, 0, 5 }, { 0, 0, 0, 8 }, { 0, 2, 0, 12 }, |
| }, |
| { /* Molex 1M Cu loopback */ |
| { 0x00, 0x09, 0x3A }, "74763-0025 ", |
| { 2, 2, 6, 15 }, { 2, 2, 6, 15 }, { 2, 2, 6, 15 }, |
| }, |
| { /* Molex 2m 28awg NoEq */ |
| { 0x00, 0x09, 0x3A }, "74757-2201 ", |
| { 0, 0, 0, 6 }, { 0, 0, 0, 9 }, { 0, 1, 1, 15 }, |
| }, |
| }; |
| |
| static const struct txdds_ent txdds_sdr[TXDDS_TABLE_SZ] = { |
| /* amp, pre, main, post */ |
| { 2, 2, 15, 6 }, /* Loopback */ |
| { 0, 0, 0, 1 }, /* 2 dB */ |
| { 0, 0, 0, 2 }, /* 3 dB */ |
| { 0, 0, 0, 3 }, /* 4 dB */ |
| { 0, 0, 0, 4 }, /* 5 dB */ |
| { 0, 0, 0, 5 }, /* 6 dB */ |
| { 0, 0, 0, 6 }, /* 7 dB */ |
| { 0, 0, 0, 7 }, /* 8 dB */ |
| { 0, 0, 0, 8 }, /* 9 dB */ |
| { 0, 0, 0, 9 }, /* 10 dB */ |
| { 0, 0, 0, 10 }, /* 11 dB */ |
| { 0, 0, 0, 11 }, /* 12 dB */ |
| { 0, 0, 0, 12 }, /* 13 dB */ |
| { 0, 0, 0, 13 }, /* 14 dB */ |
| { 0, 0, 0, 14 }, /* 15 dB */ |
| { 0, 0, 0, 15 }, /* 16 dB */ |
| }; |
| |
| static const struct txdds_ent txdds_ddr[TXDDS_TABLE_SZ] = { |
| /* amp, pre, main, post */ |
| { 2, 2, 15, 6 }, /* Loopback */ |
| { 0, 0, 0, 8 }, /* 2 dB */ |
| { 0, 0, 0, 8 }, /* 3 dB */ |
| { 0, 0, 0, 9 }, /* 4 dB */ |
| { 0, 0, 0, 9 }, /* 5 dB */ |
| { 0, 0, 0, 10 }, /* 6 dB */ |
| { 0, 0, 0, 10 }, /* 7 dB */ |
| { 0, 0, 0, 11 }, /* 8 dB */ |
| { 0, 0, 0, 11 }, /* 9 dB */ |
| { 0, 0, 0, 12 }, /* 10 dB */ |
| { 0, 0, 0, 12 }, /* 11 dB */ |
| { 0, 0, 0, 13 }, /* 12 dB */ |
| { 0, 0, 0, 13 }, /* 13 dB */ |
| { 0, 0, 0, 14 }, /* 14 dB */ |
| { 0, 0, 0, 14 }, /* 15 dB */ |
| { 0, 0, 0, 15 }, /* 16 dB */ |
| }; |
| |
| static const struct txdds_ent txdds_qdr[TXDDS_TABLE_SZ] = { |
| /* amp, pre, main, post */ |
| { 2, 2, 15, 6 }, /* Loopback */ |
| { 0, 1, 0, 7 }, /* 2 dB (also QMH7342) */ |
| { 0, 1, 0, 9 }, /* 3 dB (also QMH7342) */ |
| { 0, 1, 0, 11 }, /* 4 dB */ |
| { 0, 1, 0, 13 }, /* 5 dB */ |
| { 0, 1, 0, 15 }, /* 6 dB */ |
| { 0, 1, 3, 15 }, /* 7 dB */ |
| { 0, 1, 7, 15 }, /* 8 dB */ |
| { 0, 1, 7, 15 }, /* 9 dB */ |
| { 0, 1, 8, 15 }, /* 10 dB */ |
| { 0, 1, 9, 15 }, /* 11 dB */ |
| { 0, 1, 10, 15 }, /* 12 dB */ |
| { 0, 2, 6, 15 }, /* 13 dB */ |
| { 0, 2, 7, 15 }, /* 14 dB */ |
| { 0, 2, 8, 15 }, /* 15 dB */ |
| { 0, 2, 9, 15 }, /* 16 dB */ |
| }; |
| |
| /* |
| * extra entries for use with txselect, for indices >= TXDDS_TABLE_SZ. |
| * These are mostly used for mez cards going through connectors |
| * and backplane traces, but can be used to add other "unusual" |
| * table values as well. |
| */ |
| static const struct txdds_ent txdds_extra_sdr[TXDDS_EXTRA_SZ] = { |
| /* amp, pre, main, post */ |
| { 0, 0, 0, 1 }, /* QMH7342 backplane settings */ |
| { 0, 0, 0, 1 }, /* QMH7342 backplane settings */ |
| { 0, 0, 0, 2 }, /* QMH7342 backplane settings */ |
| { 0, 0, 0, 2 }, /* QMH7342 backplane settings */ |
| { 0, 0, 0, 11 }, /* QME7342 backplane settings */ |
| { 0, 0, 0, 11 }, /* QME7342 backplane settings */ |
| { 0, 0, 0, 11 }, /* QME7342 backplane settings */ |
| { 0, 0, 0, 11 }, /* QME7342 backplane settings */ |
| { 0, 0, 0, 11 }, /* QME7342 backplane settings */ |
| { 0, 0, 0, 11 }, /* QME7342 backplane settings */ |
| { 0, 0, 0, 11 }, /* QME7342 backplane settings */ |
| { 0, 0, 0, 3 }, /* QMH7342 backplane settings */ |
| { 0, 0, 0, 4 }, /* QMH7342 backplane settings */ |
| }; |
| |
| static const struct txdds_ent txdds_extra_ddr[TXDDS_EXTRA_SZ] = { |
| /* amp, pre, main, post */ |
| { 0, 0, 0, 7 }, /* QMH7342 backplane settings */ |
| { 0, 0, 0, 7 }, /* QMH7342 backplane settings */ |
| { 0, 0, 0, 8 }, /* QMH7342 backplane settings */ |
| { 0, 0, 0, 8 }, /* QMH7342 backplane settings */ |
| { 0, 0, 0, 13 }, /* QME7342 backplane settings */ |
| { 0, 0, 0, 13 }, /* QME7342 backplane settings */ |
| { 0, 0, 0, 13 }, /* QME7342 backplane settings */ |
| { 0, 0, 0, 13 }, /* QME7342 backplane settings */ |
| { 0, 0, 0, 13 }, /* QME7342 backplane settings */ |
| { 0, 0, 0, 13 }, /* QME7342 backplane settings */ |
| { 0, 0, 0, 13 }, /* QME7342 backplane settings */ |
| { 0, 0, 0, 9 }, /* QMH7342 backplane settings */ |
| { 0, 0, 0, 10 }, /* QMH7342 backplane settings */ |
| }; |
| |
| static const struct txdds_ent txdds_extra_qdr[TXDDS_EXTRA_SZ] = { |
| /* amp, pre, main, post */ |
| { 0, 1, 0, 4 }, /* QMH7342 backplane settings */ |
| { 0, 1, 0, 5 }, /* QMH7342 backplane settings */ |
| { 0, 1, 0, 6 }, /* QMH7342 backplane settings */ |
| { 0, 1, 0, 8 }, /* QMH7342 backplane settings */ |
| { 0, 1, 12, 10 }, /* QME7342 backplane setting */ |
| { 0, 1, 12, 11 }, /* QME7342 backplane setting */ |
| { 0, 1, 12, 12 }, /* QME7342 backplane setting */ |
| { 0, 1, 12, 14 }, /* QME7342 backplane setting */ |
| { 0, 1, 12, 6 }, /* QME7342 backplane setting */ |
| { 0, 1, 12, 7 }, /* QME7342 backplane setting */ |
| { 0, 1, 12, 8 }, /* QME7342 backplane setting */ |
| { 0, 1, 0, 10 }, /* QMH7342 backplane settings */ |
| { 0, 1, 0, 12 }, /* QMH7342 backplane settings */ |
| }; |
| |
| static const struct txdds_ent txdds_extra_mfg[TXDDS_MFG_SZ] = { |
| /* amp, pre, main, post */ |
| { 0, 0, 0, 0 }, /* QME7342 mfg settings */ |
| { 0, 0, 0, 6 }, /* QME7342 P2 mfg settings */ |
| }; |
| |
| static const struct txdds_ent *get_atten_table(const struct txdds_ent *txdds, |
| unsigned atten) |
| { |
| /* |
| * The attenuation table starts at 2dB for entry 1, |
| * with entry 0 being the loopback entry. |
| */ |
| if (atten <= 2) |
| atten = 1; |
| else if (atten > TXDDS_TABLE_SZ) |
| atten = TXDDS_TABLE_SZ - 1; |
| else |
| atten--; |
| return txdds + atten; |
| } |
| |
| /* |
| * if override is set, the module parameter txselect has a value |
| * for this specific port, so use it, rather than our normal mechanism. |
| */ |
| static void find_best_ent(struct qib_pportdata *ppd, |
| const struct txdds_ent **sdr_dds, |
| const struct txdds_ent **ddr_dds, |
| const struct txdds_ent **qdr_dds, int override) |
| { |
| struct qib_qsfp_cache *qd = &ppd->cpspec->qsfp_data.cache; |
| int idx; |
| |
| /* Search table of known cables */ |
| for (idx = 0; !override && idx < ARRAY_SIZE(vendor_txdds); ++idx) { |
| const struct vendor_txdds_ent *v = vendor_txdds + idx; |
| |
| if (!memcmp(v->oui, qd->oui, QSFP_VOUI_LEN) && |
| (!v->partnum || |
| !memcmp(v->partnum, qd->partnum, QSFP_PN_LEN))) { |
| *sdr_dds = &v->sdr; |
| *ddr_dds = &v->ddr; |
| *qdr_dds = &v->qdr; |
| return; |
| } |
| } |
| |
| /* Active cables don't have attenuation so we only set SERDES |
| * settings to account for the attenuation of the board traces. */ |
| if (!override && QSFP_IS_ACTIVE(qd->tech)) { |
| *sdr_dds = txdds_sdr + ppd->dd->board_atten; |
| *ddr_dds = txdds_ddr + ppd->dd->board_atten; |
| *qdr_dds = txdds_qdr + ppd->dd->board_atten; |
| return; |
| } |
| |
| if (!override && QSFP_HAS_ATTEN(qd->tech) && (qd->atten[0] || |
| qd->atten[1])) { |
| *sdr_dds = get_atten_table(txdds_sdr, qd->atten[0]); |
| *ddr_dds = get_atten_table(txdds_ddr, qd->atten[0]); |
| *qdr_dds = get_atten_table(txdds_qdr, qd->atten[1]); |
| return; |
| } else if (ppd->cpspec->no_eep < TXDDS_TABLE_SZ) { |
| /* |
| * If we have no (or incomplete) data from the cable |
| * EEPROM, or no QSFP, or override is set, use the |
| * module parameter value to index into the attentuation |
| * table. |
| */ |
| idx = ppd->cpspec->no_eep; |
| *sdr_dds = &txdds_sdr[idx]; |
| *ddr_dds = &txdds_ddr[idx]; |
| *qdr_dds = &txdds_qdr[idx]; |
| } else if (ppd->cpspec->no_eep < (TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ)) { |
| /* similar to above, but index into the "extra" table. */ |
| idx = ppd->cpspec->no_eep - TXDDS_TABLE_SZ; |
| *sdr_dds = &txdds_extra_sdr[idx]; |
| *ddr_dds = &txdds_extra_ddr[idx]; |
| *qdr_dds = &txdds_extra_qdr[idx]; |
| } else if ((IS_QME(ppd->dd) || IS_QMH(ppd->dd)) && |
| ppd->cpspec->no_eep < (TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ + |
| TXDDS_MFG_SZ)) { |
| idx = ppd->cpspec->no_eep - (TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ); |
| printk(KERN_INFO QIB_DRV_NAME |
| " IB%u:%u use idx %u into txdds_mfg\n", |
| ppd->dd->unit, ppd->port, idx); |
| *sdr_dds = &txdds_extra_mfg[idx]; |
| *ddr_dds = &txdds_extra_mfg[idx]; |
| *qdr_dds = &txdds_extra_mfg[idx]; |
| } else { |
| /* this shouldn't happen, it's range checked */ |
| *sdr_dds = txdds_sdr + qib_long_atten; |
| *ddr_dds = txdds_ddr + qib_long_atten; |
| *qdr_dds = txdds_qdr + qib_long_atten; |
| } |
| } |
| |
| static void init_txdds_table(struct qib_pportdata *ppd, int override) |
| { |
| const struct txdds_ent *sdr_dds, *ddr_dds, *qdr_dds; |
| struct txdds_ent *dds; |
| int idx; |
| int single_ent = 0; |
| |
| find_best_ent(ppd, &sdr_dds, &ddr_dds, &qdr_dds, override); |
| |
| /* for mez cards or override, use the selected value for all entries */ |
| if (!(ppd->dd->flags & QIB_HAS_QSFP) || override) |
| single_ent = 1; |
| |
| /* Fill in the first entry with the best entry found. */ |
| set_txdds(ppd, 0, sdr_dds); |
| set_txdds(ppd, TXDDS_TABLE_SZ, ddr_dds); |
| set_txdds(ppd, 2 * TXDDS_TABLE_SZ, qdr_dds); |
| if (ppd->lflags & (QIBL_LINKINIT | QIBL_LINKARMED | |
| QIBL_LINKACTIVE)) { |
| dds = (struct txdds_ent *)(ppd->link_speed_active == |
| QIB_IB_QDR ? qdr_dds : |
| (ppd->link_speed_active == |
| QIB_IB_DDR ? ddr_dds : sdr_dds)); |
| write_tx_serdes_param(ppd, dds); |
| } |
| |
| /* Fill in the remaining entries with the default table values. */ |
| for (idx = 1; idx < ARRAY_SIZE(txdds_sdr); ++idx) { |
| set_txdds(ppd, idx, single_ent ? sdr_dds : txdds_sdr + idx); |
| set_txdds(ppd, idx + TXDDS_TABLE_SZ, |
| single_ent ? ddr_dds : txdds_ddr + idx); |
| set_txdds(ppd, idx + 2 * TXDDS_TABLE_SZ, |
| single_ent ? qdr_dds : txdds_qdr + idx); |
| } |
| } |
| |
| #define KR_AHB_ACC KREG_IDX(ahb_access_ctrl) |
| #define KR_AHB_TRANS KREG_IDX(ahb_transaction_reg) |
| #define AHB_TRANS_RDY SYM_MASK(ahb_transaction_reg, ahb_rdy) |
| #define AHB_ADDR_LSB SYM_LSB(ahb_transaction_reg, ahb_address) |
| #define AHB_DATA_LSB SYM_LSB(ahb_transaction_reg, ahb_data) |
| #define AHB_WR SYM_MASK(ahb_transaction_reg, write_not_read) |
| #define AHB_TRANS_TRIES 10 |
| |
| /* |
| * The chan argument is 0=chan0, 1=chan1, 2=pll, 3=chan2, 4=chan4, |
| * 5=subsystem which is why most calls have "chan + chan >> 1" |
| * for the channel argument. |
| */ |
| static u32 ahb_mod(struct qib_devdata *dd, int quad, int chan, int addr, |
| u32 data, u32 mask) |
| { |
| u32 rd_data, wr_data, sz_mask; |
| u64 trans, acc, prev_acc; |
| u32 ret = 0xBAD0BAD; |
| int tries; |
| |
| prev_acc = qib_read_kreg64(dd, KR_AHB_ACC); |
| /* From this point on, make sure we return access */ |
| acc = (quad << 1) | 1; |
| qib_write_kreg(dd, KR_AHB_ACC, acc); |
| |
| for (tries = 1; tries < AHB_TRANS_TRIES; ++tries) { |
| trans = qib_read_kreg64(dd, KR_AHB_TRANS); |
| if (trans & AHB_TRANS_RDY) |
| break; |
| } |
| if (tries >= AHB_TRANS_TRIES) { |
| qib_dev_err(dd, "No ahb_rdy in %d tries\n", AHB_TRANS_TRIES); |
| goto bail; |
| } |
| |
| /* If mask is not all 1s, we need to read, but different SerDes |
| * entities have different sizes |
| */ |
| sz_mask = (1UL << ((quad == 1) ? 32 : 16)) - 1; |
| wr_data = data & mask & sz_mask; |
| if ((~mask & sz_mask) != 0) { |
| trans = ((chan << 6) | addr) << (AHB_ADDR_LSB + 1); |
| qib_write_kreg(dd, KR_AHB_TRANS, trans); |
| |
| for (tries = 1; tries < AHB_TRANS_TRIES; ++tries) { |
| trans = qib_read_kreg64(dd, KR_AHB_TRANS); |
| if (trans & AHB_TRANS_RDY) |
| break; |
| } |
| if (tries >= AHB_TRANS_TRIES) { |
| qib_dev_err(dd, "No Rd ahb_rdy in %d tries\n", |
| AHB_TRANS_TRIES); |
| goto bail; |
| } |
| /* Re-read in case host split reads and read data first */ |
| trans = qib_read_kreg64(dd, KR_AHB_TRANS); |
| rd_data = (uint32_t)(trans >> AHB_DATA_LSB); |
| wr_data |= (rd_data & ~mask & sz_mask); |
| } |
| |
| /* If mask is not zero, we need to write. */ |
| if (mask & sz_mask) { |
| trans = ((chan << 6) | addr) << (AHB_ADDR_LSB + 1); |
| trans |= ((uint64_t)wr_data << AHB_DATA_LSB); |
| trans |= AHB_WR; |
| qib_write_kreg(dd, KR_AHB_TRANS, trans); |
| |
| for (tries = 1; tries < AHB_TRANS_TRIES; ++tries) { |
| trans = qib_read_kreg64(dd, KR_AHB_TRANS); |
| if (trans & AHB_TRANS_RDY) |
| break; |
| } |
| if (tries >= AHB_TRANS_TRIES) { |
| qib_dev_err(dd, "No Wr ahb_rdy in %d tries\n", |
| AHB_TRANS_TRIES); |
| goto bail; |
| } |
| } |
| ret = wr_data; |
| bail: |
| qib_write_kreg(dd, KR_AHB_ACC, prev_acc); |
| return ret; |
| } |
| |
| static void ibsd_wr_allchans(struct qib_pportdata *ppd, int addr, unsigned data, |
| unsigned mask) |
| { |
| struct qib_devdata *dd = ppd->dd; |
| int chan; |
| u32 rbc; |
| |
| for (chan = 0; chan < SERDES_CHANS; ++chan) { |
| ahb_mod(dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), addr, |
| data, mask); |
| rbc = ahb_mod(dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), |
| addr, 0, 0); |
| } |
| } |
| |
| static void serdes_7322_los_enable(struct qib_pportdata *ppd, int enable) |
| { |
| u64 data = qib_read_kreg_port(ppd, krp_serdesctrl); |
| u8 state = SYM_FIELD(data, IBSerdesCtrl_0, RXLOSEN); |
| |
| if (enable && !state) { |
| printk(KERN_INFO QIB_DRV_NAME " IB%u:%u Turning LOS on\n", |
| ppd->dd->unit, ppd->port); |
| data |= SYM_MASK(IBSerdesCtrl_0, RXLOSEN); |
| } else if (!enable && state) { |
| printk(KERN_INFO QIB_DRV_NAME " IB%u:%u Turning LOS off\n", |
| ppd->dd->unit, ppd->port); |
| data &= ~SYM_MASK(IBSerdesCtrl_0, RXLOSEN); |
| } |
| qib_write_kreg_port(ppd, krp_serdesctrl, data); |
| } |
| |
| static int serdes_7322_init(struct qib_pportdata *ppd) |
| { |
| int ret = 0; |
| if (ppd->dd->cspec->r1) |
| ret = serdes_7322_init_old(ppd); |
| else |
| ret = serdes_7322_init_new(ppd); |
| return ret; |
| } |
| |
| static int serdes_7322_init_old(struct qib_pportdata *ppd) |
| { |
| u32 le_val; |
| |
| /* |
| * Initialize the Tx DDS tables. Also done every QSFP event, |
| * for adapters with QSFP |
| */ |
| init_txdds_table(ppd, 0); |
| |
| /* ensure no tx overrides from earlier driver loads */ |
| qib_write_kreg_port(ppd, krp_tx_deemph_override, |
| SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, |
| reset_tx_deemphasis_override)); |
| |
| /* Patch some SerDes defaults to "Better for IB" */ |
| /* Timing Loop Bandwidth: cdr_timing[11:9] = 0 */ |
| ibsd_wr_allchans(ppd, 2, 0, BMASK(11, 9)); |
| |
| /* Termination: rxtermctrl_r2d addr 11 bits [12:11] = 1 */ |
| ibsd_wr_allchans(ppd, 11, (1 << 11), BMASK(12, 11)); |
| /* Enable LE2: rxle2en_r2a addr 13 bit [6] = 1 */ |
| ibsd_wr_allchans(ppd, 13, (1 << 6), (1 << 6)); |
| |
| /* May be overridden in qsfp_7322_event */ |
| le_val = IS_QME(ppd->dd) ? LE2_QME : LE2_DEFAULT; |
| ibsd_wr_allchans(ppd, 13, (le_val << 7), BMASK(9, 7)); |
| |
| /* enable LE1 adaptation for all but QME, which is disabled */ |
| le_val = IS_QME(ppd->dd) ? 0 : 1; |
| ibsd_wr_allchans(ppd, 13, (le_val << 5), (1 << 5)); |
| |
| /* Clear cmode-override, may be set from older driver */ |
| ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 0 << 14, 1 << 14); |
| |
| /* Timing Recovery: rxtapsel addr 5 bits [9:8] = 0 */ |
| ibsd_wr_allchans(ppd, 5, (0 << 8), BMASK(9, 8)); |
| |
| /* setup LoS params; these are subsystem, so chan == 5 */ |
| /* LoS filter threshold_count on, ch 0-3, set to 8 */ |
| ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 5, 8 << 11, BMASK(14, 11)); |
| ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 7, 8 << 4, BMASK(7, 4)); |
| ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 8, 8 << 11, BMASK(14, 11)); |
| ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 8 << 4, BMASK(7, 4)); |
| |
| /* LoS filter threshold_count off, ch 0-3, set to 4 */ |
| ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 6, 4 << 0, BMASK(3, 0)); |
| ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 7, 4 << 8, BMASK(11, 8)); |
| ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 9, 4 << 0, BMASK(3, 0)); |
| ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 4 << 8, BMASK(11, 8)); |
| |
| /* LoS filter select enabled */ |
| ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 9, 1 << 15, 1 << 15); |
| |
| /* LoS target data: SDR=4, DDR=2, QDR=1 */ |
| ibsd_wr_allchans(ppd, 14, (1 << 3), BMASK(5, 3)); /* QDR */ |
| ibsd_wr_allchans(ppd, 20, (2 << 10), BMASK(12, 10)); /* DDR */ |
| ibsd_wr_allchans(ppd, 20, (4 << 13), BMASK(15, 13)); /* SDR */ |
| |
| serdes_7322_los_enable(ppd, 1); |
| |
| /* rxbistena; set 0 to avoid effects of it switch later */ |
| ibsd_wr_allchans(ppd, 9, 0 << 15, 1 << 15); |
| |
| /* Configure 4 DFE taps, and only they adapt */ |
| ibsd_wr_allchans(ppd, 16, 0 << 0, BMASK(1, 0)); |
| |
| /* gain hi stop 32 (22) (6:1) lo stop 7 (10:7) target 22 (13) (15:11) */ |
| le_val = (ppd->dd->cspec->r1 || IS_QME(ppd->dd)) ? 0xb6c0 : 0x6bac; |
| ibsd_wr_allchans(ppd, 21, le_val, 0xfffe); |
| |
| /* |
| * Set receive adaptation mode. SDR and DDR adaptation are |
| * always on, and QDR is initially enabled; later disabled. |
| */ |
| qib_write_kreg_port(ppd, krp_static_adapt_dis(0), 0ULL); |
| qib_write_kreg_port(ppd, krp_static_adapt_dis(1), 0ULL); |
| qib_write_kreg_port(ppd, krp_static_adapt_dis(2), |
| ppd->dd->cspec->r1 ? |
| QDR_STATIC_ADAPT_DOWN_R1 : QDR_STATIC_ADAPT_DOWN); |
| ppd->cpspec->qdr_dfe_on = 1; |
| |
| /* FLoop LOS gate: PPM filter enabled */ |
| ibsd_wr_allchans(ppd, 38, 0 << 10, 1 << 10); |
| |
| /* rx offset center enabled */ |
| ibsd_wr_allchans(ppd, 12, 1 << 4, 1 << 4); |
| |
| if (!ppd->dd->cspec->r1) { |
| ibsd_wr_allchans(ppd, 12, 1 << 12, 1 << 12); |
| ibsd_wr_allchans(ppd, 12, 2 << 8, 0x0f << 8); |
| } |
| |
| /* Set the frequency loop bandwidth to 15 */ |
| ibsd_wr_allchans(ppd, 2, 15 << 5, BMASK(8, 5)); |
| |
| return 0; |
| } |
| |
| static int serdes_7322_init_new(struct qib_pportdata *ppd) |
| { |
| u64 tstart; |
| u32 le_val, rxcaldone; |
| int chan, chan_done = (1 << SERDES_CHANS) - 1; |
| |
| /* Clear cmode-override, may be set from older driver */ |
| ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 0 << 14, 1 << 14); |
| |
| /* ensure no tx overrides from earlier driver loads */ |
| qib_write_kreg_port(ppd, krp_tx_deemph_override, |
| SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, |
| reset_tx_deemphasis_override)); |
| |
| /* START OF LSI SUGGESTED SERDES BRINGUP */ |
| /* Reset - Calibration Setup */ |
| /* Stop DFE adaptaion */ |
| ibsd_wr_allchans(ppd, 1, 0, BMASK(9, 1)); |
| /* Disable LE1 */ |
| ibsd_wr_allchans(ppd, 13, 0, BMASK(5, 5)); |
| /* Disable autoadapt for LE1 */ |
| ibsd_wr_allchans(ppd, 1, 0, BMASK(15, 15)); |
| /* Disable LE2 */ |
| ibsd_wr_allchans(ppd, 13, 0, BMASK(6, 6)); |
| /* Disable VGA */ |
| ibsd_wr_allchans(ppd, 5, 0, BMASK(0, 0)); |
| /* Disable AFE Offset Cancel */ |
| ibsd_wr_allchans(ppd, 12, 0, BMASK(12, 12)); |
| /* Disable Timing Loop */ |
| ibsd_wr_allchans(ppd, 2, 0, BMASK(3, 3)); |
| /* Disable Frequency Loop */ |
| ibsd_wr_allchans(ppd, 2, 0, BMASK(4, 4)); |
| /* Disable Baseline Wander Correction */ |
| ibsd_wr_allchans(ppd, 13, 0, BMASK(13, 13)); |
| /* Disable RX Calibration */ |
| ibsd_wr_allchans(ppd, 4, 0, BMASK(10, 10)); |
| /* Disable RX Offset Calibration */ |
| ibsd_wr_allchans(ppd, 12, 0, BMASK(4, 4)); |
| /* Select BB CDR */ |
| ibsd_wr_allchans(ppd, 2, (1 << 15), BMASK(15, 15)); |
| /* CDR Step Size */ |
| ibsd_wr_allchans(ppd, 5, 0, BMASK(9, 8)); |
| /* Enable phase Calibration */ |
| ibsd_wr_allchans(ppd, 12, (1 << 5), BMASK(5, 5)); |
| /* DFE Bandwidth [2:14-12] */ |
| ibsd_wr_allchans(ppd, 2, (4 << 12), BMASK(14, 12)); |
| /* DFE Config (4 taps only) */ |
| ibsd_wr_allchans(ppd, 16, 0, BMASK(1, 0)); |
| /* Gain Loop Bandwidth */ |
| if (!ppd->dd->cspec->r1) { |
| ibsd_wr_allchans(ppd, 12, 1 << 12, BMASK(12, 12)); |
| ibsd_wr_allchans(ppd, 12, 2 << 8, BMASK(11, 8)); |
| } else { |
| ibsd_wr_allchans(ppd, 19, (3 << 11), BMASK(13, 11)); |
| } |
| /* Baseline Wander Correction Gain [13:4-0] (leave as default) */ |
| /* Baseline Wander Correction Gain [3:7-5] (leave as default) */ |
| /* Data Rate Select [5:7-6] (leave as default) */ |
| /* RX Parallel Word Width [3:10-8] (leave as default) */ |
| |
| /* RX REST */ |
| /* Single- or Multi-channel reset */ |
| /* RX Analog reset */ |
| /* RX Digital reset */ |
| ibsd_wr_allchans(ppd, 0, 0, BMASK(15, 13)); |
| msleep(20); |
| /* RX Analog reset */ |
| ibsd_wr_allchans(ppd, 0, (1 << 14), BMASK(14, 14)); |
| msleep(20); |
| /* RX Digital reset */ |
| ibsd_wr_allchans(ppd, 0, (1 << 13), BMASK(13, 13)); |
| msleep(20); |
| |
| /* setup LoS params; these are subsystem, so chan == 5 */ |
| /* LoS filter threshold_count on, ch 0-3, set to 8 */ |
| ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 5, 8 << 11, BMASK(14, 11)); |
| ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 7, 8 << 4, BMASK(7, 4)); |
| ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 8, 8 << 11, BMASK(14, 11)); |
| ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 8 << 4, BMASK(7, 4)); |
| |
| /* LoS filter threshold_count off, ch 0-3, set to 4 */ |
| ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 6, 4 << 0, BMASK(3, 0)); |
| ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 7, 4 << 8, BMASK(11, 8)); |
| ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 9, 4 << 0, BMASK(3, 0)); |
| ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 4 << 8, BMASK(11, 8)); |
| |
| /* LoS filter select enabled */ |
| ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 9, 1 << 15, 1 << 15); |
| |
| /* LoS target data: SDR=4, DDR=2, QDR=1 */ |
| ibsd_wr_allchans(ppd, 14, (1 << 3), BMASK(5, 3)); /* QDR */ |
| ibsd_wr_allchans(ppd, 20, (2 << 10), BMASK(12, 10)); /* DDR */ |
| ibsd_wr_allchans(ppd, 20, (4 << 13), BMASK(15, 13)); /* SDR */ |
| |
| /* Turn on LOS on initial SERDES init */ |
| serdes_7322_los_enable(ppd, 1); |
| /* FLoop LOS gate: PPM filter enabled */ |
| ibsd_wr_allchans(ppd, 38, 0 << 10, 1 << 10); |
| |
| /* RX LATCH CALIBRATION */ |
| /* Enable Eyefinder Phase Calibration latch */ |
| ibsd_wr_allchans(ppd, 15, 1, BMASK(0, 0)); |
| /* Enable RX Offset Calibration latch */ |
| ibsd_wr_allchans(ppd, 12, (1 << 4), BMASK(4, 4)); |
| msleep(20); |
| /* Start Calibration */ |
| ibsd_wr_allchans(ppd, 4, (1 << 10), BMASK(10, 10)); |
| tstart = get_jiffies_64(); |
| while (chan_done && |
| !time_after64(get_jiffies_64(), |
| tstart + msecs_to_jiffies(500))) { |
| msleep(20); |
| for (chan = 0; chan < SERDES_CHANS; ++chan) { |
| rxcaldone = ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), |
| (chan + (chan >> 1)), |
| 25, 0, 0); |
| if ((~rxcaldone & (u32)BMASK(9, 9)) == 0 && |
| (~chan_done & (1 << chan)) == 0) |
| chan_done &= ~(1 << chan); |
| } |
| } |
| if (chan_done) { |
| printk(KERN_INFO QIB_DRV_NAME |
| " Serdes %d calibration not done after .5 sec: 0x%x\n", |
| IBSD(ppd->hw_pidx), chan_done); |
| } else { |
| for (chan = 0; chan < SERDES_CHANS; ++chan) { |
| rxcaldone = ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), |
| (chan + (chan >> 1)), |
| 25, 0, 0); |
| if ((~rxcaldone & (u32)BMASK(10, 10)) == 0) |
| printk(KERN_INFO QIB_DRV_NAME |
| " Serdes %d chan %d calibration " |
| "failed\n", IBSD(ppd->hw_pidx), chan); |
| } |
| } |
| |
| /* Turn off Calibration */ |
| ibsd_wr_allchans(ppd, 4, 0, BMASK(10, 10)); |
| msleep(20); |
| |
| /* BRING RX UP */ |
| /* Set LE2 value (May be overridden in qsfp_7322_event) */ |
| le_val = IS_QME(ppd->dd) ? LE2_QME : LE2_DEFAULT; |
| ibsd_wr_allchans(ppd, 13, (le_val << 7), BMASK(9, 7)); |
| /* Set LE2 Loop bandwidth */ |
| ibsd_wr_allchans(ppd, 3, (7 << 5), BMASK(7, 5)); |
| /* Enable LE2 */ |
| ibsd_wr_allchans(ppd, 13, (1 << 6), BMASK(6, 6)); |
| msleep(20); |
| /* Enable H0 only */ |
| ibsd_wr_allchans(ppd, 1, 1, BMASK(9, 1)); |
| /* gain hi stop 32 (22) (6:1) lo stop 7 (10:7) target 22 (13) (15:11) */ |
| le_val = (ppd->dd->cspec->r1 || IS_QME(ppd->dd)) ? 0xb6c0 : 0x6bac; |
| ibsd_wr_allchans(ppd, 21, le_val, 0xfffe); |
| /* Enable VGA */ |
| ibsd_wr_allchans(ppd, 5, 0, BMASK(0, 0)); |
| msleep(20); |
| /* Set Frequency Loop Bandwidth */ |
| ibsd_wr_allchans(ppd, 2, (7 << 5), BMASK(8, 5)); |
| /* Enable Frequency Loop */ |
| ibsd_wr_allchans(ppd, 2, (1 << 4), BMASK(4, 4)); |
| /* Set Timing Loop Bandwidth */ |
| ibsd_wr_allchans(ppd, 2, 0, BMASK(11, 9)); |
| /* Enable Timing Loop */ |
| ibsd_wr_allchans(ppd, 2, (1 << 3), BMASK(3, 3)); |
| msleep(50); |
| /* Enable DFE |
| * Set receive adaptation mode. SDR and DDR adaptation are |
| * always on, and QDR is initially enabled; later disabled. |
| */ |
| qib_write_kreg_port(ppd, krp_static_adapt_dis(0), 0ULL); |
| qib_write_kreg_port(ppd, krp_static_adapt_dis(1), 0ULL); |
| qib_write_kreg_port(ppd, krp_static_adapt_dis(2), |
| ppd->dd->cspec->r1 ? |
| QDR_STATIC_ADAPT_DOWN_R1 : QDR_STATIC_ADAPT_DOWN); |
| ppd->cpspec->qdr_dfe_on = 1; |
| /* Disable LE1 */ |
| ibsd_wr_allchans(ppd, 13, (0 << 5), (1 << 5)); |
| /* Disable auto adapt for LE1 */ |
| ibsd_wr_allchans(ppd, 1, (0 << 15), BMASK(15, 15)); |
| msleep(20); |
| /* Enable AFE Offset Cancel */ |
| ibsd_wr_allchans(ppd, 12, (1 << 12), BMASK(12, 12)); |
| /* Enable Baseline Wander Correction */ |
| ibsd_wr_allchans(ppd, 12, (1 << 13), BMASK(13, 13)); |
| /* Termination: rxtermctrl_r2d addr 11 bits [12:11] = 1 */ |
| ibsd_wr_allchans(ppd, 11, (1 << 11), BMASK(12, 11)); |
| /* VGA output common mode */ |
| ibsd_wr_allchans(ppd, 12, (3 << 2), BMASK(3, 2)); |
| |
| /* |
| * Initialize the Tx DDS tables. Also done every QSFP event, |
| * for adapters with QSFP |
| */ |
| init_txdds_table(ppd, 0); |
| |
| return 0; |
| } |
| |
| /* start adjust QMH serdes parameters */ |
| |
| static void set_man_code(struct qib_pportdata *ppd, int chan, int code) |
| { |
| ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), |
| 9, code << 9, 0x3f << 9); |
| } |
| |
| static void set_man_mode_h1(struct qib_pportdata *ppd, int chan, |
| int enable, u32 tapenable) |
| { |
| if (enable) |
| ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), |
| 1, 3 << 10, 0x1f << 10); |
| else |
| ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), |
| 1, 0, 0x1f << 10); |
| } |
| |
| /* Set clock to 1, 0, 1, 0 */ |
| static void clock_man(struct qib_pportdata *ppd, int chan) |
| { |
| ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), |
| 4, 0x4000, 0x4000); |
| ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), |
| 4, 0, 0x4000); |
| ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), |
| 4, 0x4000, 0x4000); |
| ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), |
| 4, 0, 0x4000); |
| } |
| |
| /* |
| * write the current Tx serdes pre,post,main,amp settings into the serdes. |
| * The caller must pass the settings appropriate for the current speed, |
| * or not care if they are correct for the current speed. |
| */ |
| static void write_tx_serdes_param(struct qib_pportdata *ppd, |
| struct txdds_ent *txdds) |
| { |
| u64 deemph; |
| |
| deemph = qib_read_kreg_port(ppd, krp_tx_deemph_override); |
| /* field names for amp, main, post, pre, respectively */ |
| deemph &= ~(SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txampcntl_d2a) | |
| SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txc0_ena) | |
| SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txcp1_ena) | |
| SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txcn1_ena)); |
| |
| deemph |= SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, |
| tx_override_deemphasis_select); |
| deemph |= (txdds->amp & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, |
| txampcntl_d2a)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0, |
| txampcntl_d2a); |
| deemph |= (txdds->main & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, |
| txc0_ena)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0, |
| txc0_ena); |
| deemph |= (txdds->post & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, |
| txcp1_ena)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0, |
| txcp1_ena); |
| deemph |= (txdds->pre & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, |
| txcn1_ena)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0, |
| txcn1_ena); |
| qib_write_kreg_port(ppd, krp_tx_deemph_override, deemph); |
| } |
| |
| /* |
| * Set the parameters for mez cards on link bounce, so they are |
| * always exactly what was requested. Similar logic to init_txdds |
| * but does just the serdes. |
| */ |
| static void adj_tx_serdes(struct qib_pportdata *ppd) |
| { |
| const struct txdds_ent *sdr_dds, *ddr_dds, *qdr_dds; |
| struct txdds_ent *dds; |
| |
| find_best_ent(ppd, &sdr_dds, &ddr_dds, &qdr_dds, 1); |
| dds = (struct txdds_ent *)(ppd->link_speed_active == QIB_IB_QDR ? |
| qdr_dds : (ppd->link_speed_active == QIB_IB_DDR ? |
| ddr_dds : sdr_dds)); |
| write_tx_serdes_param(ppd, dds); |
| } |
| |
| /* set QDR forced value for H1, if needed */ |
| static void force_h1(struct qib_pportdata *ppd) |
| { |
| int chan; |
| |
| ppd->cpspec->qdr_reforce = 0; |
| if (!ppd->dd->cspec->r1) |
| return; |
| |
| for (chan = 0; chan < SERDES_CHANS; chan++) { |
| set_man_mode_h1(ppd, chan, 1, 0); |
| set_man_code(ppd, chan, ppd->cpspec->h1_val); |
| clock_man(ppd, chan); |
| set_man_mode_h1(ppd, chan, 0, 0); |
| } |
| } |
| |
| #define SJA_EN SYM_MASK(SPC_JTAG_ACCESS_REG, SPC_JTAG_ACCESS_EN) |
| #define BISTEN_LSB SYM_LSB(SPC_JTAG_ACCESS_REG, bist_en) |
| |
| #define R_OPCODE_LSB 3 |
| #define R_OP_NOP 0 |
| #define R_OP_SHIFT 2 |
| #define R_OP_UPDATE 3 |
| #define R_TDI_LSB 2 |
| #define R_TDO_LSB 1 |
| #define R_RDY 1 |
| |
| static int qib_r_grab(struct qib_devdata *dd) |
| { |
| u64 val; |
| val = SJA_EN; |
| qib_write_kreg(dd, kr_r_access, val); |
| qib_read_kreg32(dd, kr_scratch); |
| return 0; |
| } |
| |
| /* qib_r_wait_for_rdy() not only waits for the ready bit, it |
| * returns the current state of R_TDO |
| */ |
| static int qib_r_wait_for_rdy(struct qib_devdata *dd) |
| { |
| u64 val; |
| int timeout; |
| for (timeout = 0; timeout < 100 ; ++timeout) { |
| val = qib_read_kreg32(dd, kr_r_access); |
| if (val & R_RDY) |
| return (val >> R_TDO_LSB) & 1; |
| } |
| return -1; |
| } |
| |
| static int qib_r_shift(struct qib_devdata *dd, int bisten, |
| int len, u8 *inp, u8 *outp) |
| { |
| u64 valbase, val; |
| int ret, pos; |
| |
| valbase = SJA_EN | (bisten << BISTEN_LSB) | |
| (R_OP_SHIFT << R_OPCODE_LSB); |
| ret = qib_r_wait_for_rdy(dd); |
| if (ret < 0) |
| goto bail; |
| for (pos = 0; pos < len; ++pos) { |
| val = valbase; |
| if (outp) { |
| outp[pos >> 3] &= ~(1 << (pos & 7)); |
| outp[pos >> 3] |= (ret << (pos & 7)); |
| } |
| if (inp) { |
| int tdi = inp[pos >> 3] >> (pos & 7); |
| val |= ((tdi & 1) << R_TDI_LSB); |
| } |
| qib_write_kreg(dd, kr_r_access, val); |
| qib_read_kreg32(dd, kr_scratch); |
| ret = qib_r_wait_for_rdy(dd); |
| if (ret < 0) |
| break; |
| } |
| /* Restore to NOP between operations. */ |
| val = SJA_EN | (bisten << BISTEN_LSB); |
| qib_write_kreg(dd, kr_r_access, val); |
| qib_read_kreg32(dd, kr_scratch); |
| ret = qib_r_wait_for_rdy(dd); |
| |
| if (ret >= 0) |
| ret = pos; |
| bail: |
| return ret; |
| } |
| |
| static int qib_r_update(struct qib_devdata *dd, int bisten) |
| { |
| u64 val; |
| int ret; |
| |
| val = SJA_EN | (bisten << BISTEN_LSB) | (R_OP_UPDATE << R_OPCODE_LSB); |
| ret = qib_r_wait_for_rdy(dd); |
| if (ret >= 0) { |
| qib_write_kreg(dd, kr_r_access, val); |
| qib_read_kreg32(dd, kr_scratch); |
| } |
| return ret; |
| } |
| |
| #define BISTEN_PORT_SEL 15 |
| #define LEN_PORT_SEL 625 |
| #define BISTEN_AT 17 |
| #define LEN_AT 156 |
| #define BISTEN_ETM 16 |
| #define LEN_ETM 632 |
| |
| #define BIT2BYTE(x) (((x) + BITS_PER_BYTE - 1) / BITS_PER_BYTE) |
| |
| /* these are common for all IB port use cases. */ |
| static u8 reset_at[BIT2BYTE(LEN_AT)] = { |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, |
| }; |
| static u8 reset_atetm[BIT2BYTE(LEN_ETM)] = { |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x80, 0xe3, 0x81, 0x73, 0x3c, 0x70, 0x8e, |
| 0x07, 0xce, 0xf1, 0xc0, 0x39, 0x1e, 0x38, 0xc7, 0x03, 0xe7, |
| 0x78, 0xe0, 0x1c, 0x0f, 0x9c, 0x7f, 0x80, 0x73, 0x0f, 0x70, |
| 0xde, 0x01, 0xce, 0x39, 0xc0, 0xf9, 0x06, 0x38, 0xd7, 0x00, |
| 0xe7, 0x19, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, |
| }; |
| static u8 at[BIT2BYTE(LEN_AT)] = { |
| 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, |
| }; |
| |
| /* used for IB1 or IB2, only one in use */ |
| static u8 atetm_1port[BIT2BYTE(LEN_ETM)] = { |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x10, 0xf2, 0x80, 0x83, 0x1e, 0x38, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x50, 0xf4, 0x41, 0x00, 0x18, 0x78, 0xc8, 0x03, |
| 0x07, 0x7b, 0xa0, 0x3e, 0x00, 0x02, 0x00, 0x00, 0x18, 0x00, |
| 0x18, 0x00, 0x00, 0x00, 0x00, 0x4b, 0x00, 0x00, 0x00, |
| }; |
| |
| /* used when both IB1 and IB2 are in use */ |
| static u8 atetm_2port[BIT2BYTE(LEN_ETM)] = { |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x79, |
| 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0xf8, 0x80, 0x83, 0x1e, 0x38, 0xe0, 0x03, 0x05, |
| 0x7b, 0xa0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, |
| 0xa2, 0x0f, 0x50, 0xf4, 0x41, 0x00, 0x18, 0x78, 0xd1, 0x07, |
| 0x02, 0x7c, 0x80, 0x3e, 0x00, 0x02, 0x00, 0x00, 0x3e, 0x00, |
| 0x02, 0x00, 0x00, 0x00, 0x00, 0x64, 0x00, 0x00, 0x00, |
| }; |
| |
| /* used when only IB1 is in use */ |
| static u8 portsel_port1[BIT2BYTE(LEN_PORT_SEL)] = { |
| 0x32, 0x65, 0xa4, 0x7b, 0x10, 0x98, 0xdc, 0xfe, 0x13, 0x13, |
| 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x73, 0x0c, 0x0c, 0x0c, |
| 0x0c, 0x0c, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, |
| 0x13, 0x78, 0x78, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, |
| 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x74, 0x32, |
| 0x32, 0x32, 0x32, 0x32, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, |
| 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, |
| 0x14, 0x14, 0x9f, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, |
| }; |
| |
| /* used when only IB2 is in use */ |
| static u8 portsel_port2[BIT2BYTE(LEN_PORT_SEL)] = { |
| 0x32, 0x65, 0xa4, 0x7b, 0x10, 0x98, 0xdc, 0xfe, 0x39, 0x39, |
| 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x73, 0x32, 0x32, 0x32, |
| 0x32, 0x32, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, |
| 0x39, 0x78, 0x78, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, |
| 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x74, 0x32, |
| 0x32, 0x32, 0x32, 0x32, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, |
| 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, |
| 0x3a, 0x3a, 0x9f, 0x01, 0x00, 0x00, 0x00, 0x00, 0x01, |
| }; |
| |
| /* used when both IB1 and IB2 are in use */ |
| static u8 portsel_2port[BIT2BYTE(LEN_PORT_SEL)] = { |
| 0x32, 0xba, 0x54, 0x76, 0x10, 0x98, 0xdc, 0xfe, 0x13, 0x13, |
| 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x73, 0x0c, 0x0c, 0x0c, |
| 0x0c, 0x0c, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, |
| 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, |
| 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x74, 0x32, |
| 0x32, 0x32, 0x32, 0x32, 0x14, 0x14, 0x14, 0x14, 0x14, 0x3a, |
| 0x3a, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, |
| 0x14, 0x14, 0x9f, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, |
| }; |
| |
| /* |
| * Do setup to properly handle IB link recovery; if port is zero, we |
| * are initializing to cover both ports; otherwise we are initializing |
| * to cover a single port card, or the port has reached INIT and we may |
| * need to switch coverage types. |
| */ |
| static void setup_7322_link_recovery(struct qib_pportdata *ppd, u32 both) |
| { |
| u8 *portsel, *etm; |
| struct qib_devdata *dd = ppd->dd; |
| |
| if (!ppd->dd->cspec->r1) |
| return; |
| if (!both) { |
| dd->cspec->recovery_ports_initted++; |
| ppd->cpspec->recovery_init = 1; |
| } |
| if (!both && dd->cspec->recovery_ports_initted == 1) { |
| portsel = ppd->port == 1 ? portsel_port1 : portsel_port2; |
| etm = atetm_1port; |
| } else { |
| portsel = portsel_2port; |
| etm = atetm_2port; |
| } |
| |
| if (qib_r_grab(dd) < 0 || |
| qib_r_shift(dd, BISTEN_ETM, LEN_ETM, reset_atetm, NULL) < 0 || |
| qib_r_update(dd, BISTEN_ETM) < 0 || |
| qib_r_shift(dd, BISTEN_AT, LEN_AT, reset_at, NULL) < 0 || |
| qib_r_update(dd, BISTEN_AT) < 0 || |
| qib_r_shift(dd, BISTEN_PORT_SEL, LEN_PORT_SEL, |
| portsel, NULL) < 0 || |
| qib_r_update(dd, BISTEN_PORT_SEL) < 0 || |
| qib_r_shift(dd, BISTEN_AT, LEN_AT, at, NULL) < 0 || |
| qib_r_update(dd, BISTEN_AT) < 0 || |
| qib_r_shift(dd, BISTEN_ETM, LEN_ETM, etm, NULL) < 0 || |
| qib_r_update(dd, BISTEN_ETM) < 0) |
| qib_dev_err(dd, "Failed IB link recovery setup\n"); |
| } |
| |
| static void check_7322_rxe_status(struct qib_pportdata *ppd) |
| { |
| struct qib_devdata *dd = ppd->dd; |
| u64 fmask; |
| |
| if (dd->cspec->recovery_ports_initted != 1) |
| return; /* rest doesn't apply to dualport */ |
| qib_write_kreg(dd, kr_control, dd->control | |
| SYM_MASK(Control, FreezeMode)); |
| (void)qib_read_kreg64(dd, kr_scratch); |
| udelay(3); /* ibcreset asserted 400ns, be sure that's over */ |
| fmask = qib_read_kreg64(dd, kr_act_fmask); |
| if (!fmask) { |
| /* |
| * require a powercycle before we'll work again, and make |
| * sure we get no more interrupts, and don't turn off |
| * freeze. |
| */ |
| ppd->dd->cspec->stay_in_freeze = 1; |
| qib_7322_set_intr_state(ppd->dd, 0); |
| qib_write_kreg(dd, kr_fmask, 0ULL); |
| qib_dev_err(dd, "HCA unusable until powercycled\n"); |
| return; /* eventually reset */ |
| } |
| |
| qib_write_kreg(ppd->dd, kr_hwerrclear, |
| SYM_MASK(HwErrClear, IBSerdesPClkNotDetectClear_1)); |
| |
| /* don't do the full clear_freeze(), not needed for this */ |
| qib_write_kreg(dd, kr_control, dd->control); |
| qib_read_kreg32(dd, kr_scratch); |
| /* take IBC out of reset */ |
| if (ppd->link_speed_supported) { |
| ppd->cpspec->ibcctrl_a &= |
| ~SYM_MASK(IBCCtrlA_0, IBStatIntReductionEn); |
| qib_write_kreg_port(ppd, krp_ibcctrl_a, |
| ppd->cpspec->ibcctrl_a); |
| qib_read_kreg32(dd, kr_scratch); |
| if (ppd->lflags & QIBL_IB_LINK_DISABLED) |
| qib_set_ib_7322_lstate(ppd, 0, |
| QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); |
| } |
| } |