| /* |
| |
| bttv - Bt848 frame grabber driver |
| |
| Copyright (C) 1996,97,98 Ralph Metzler <rjkm@thp.uni-koeln.de> |
| & Marcus Metzler <mocm@thp.uni-koeln.de> |
| (c) 1999-2002 Gerd Knorr <kraxel@bytesex.org> |
| |
| some v4l2 code lines are taken from Justin's bttv2 driver which is |
| (c) 2000 Justin Schoeman <justin@suntiger.ee.up.ac.za> |
| |
| V4L1 removal from: |
| (c) 2005-2006 Nickolay V. Shmyrev <nshmyrev@yandex.ru> |
| |
| Fixes to be fully V4L2 compliant by |
| (c) 2006 Mauro Carvalho Chehab <mchehab@infradead.org> |
| |
| Cropping and overscan support |
| Copyright (C) 2005, 2006 Michael H. Schimek <mschimek@gmx.at> |
| Sponsored by OPQ Systems AB |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/delay.h> |
| #include <linux/slab.h> |
| #include <linux/errno.h> |
| #include <linux/fs.h> |
| #include <linux/kernel.h> |
| #include <linux/sched.h> |
| #include <linux/interrupt.h> |
| #include <linux/kdev_t.h> |
| #include "bttvp.h" |
| #include <media/v4l2-common.h> |
| #include <media/v4l2-ioctl.h> |
| #include <media/tvaudio.h> |
| #include <media/msp3400.h> |
| |
| #include <linux/dma-mapping.h> |
| |
| #include <asm/io.h> |
| #include <asm/byteorder.h> |
| |
| #include <media/saa6588.h> |
| |
| #define BTTV_VERSION "0.9.19" |
| |
| unsigned int bttv_num; /* number of Bt848s in use */ |
| struct bttv *bttvs[BTTV_MAX]; |
| |
| unsigned int bttv_debug; |
| unsigned int bttv_verbose = 1; |
| unsigned int bttv_gpio; |
| |
| /* config variables */ |
| #ifdef __BIG_ENDIAN |
| static unsigned int bigendian=1; |
| #else |
| static unsigned int bigendian; |
| #endif |
| static unsigned int radio[BTTV_MAX]; |
| static unsigned int irq_debug; |
| static unsigned int gbuffers = 8; |
| static unsigned int gbufsize = 0x208000; |
| static unsigned int reset_crop = 1; |
| |
| static int video_nr[BTTV_MAX] = { [0 ... (BTTV_MAX-1)] = -1 }; |
| static int radio_nr[BTTV_MAX] = { [0 ... (BTTV_MAX-1)] = -1 }; |
| static int vbi_nr[BTTV_MAX] = { [0 ... (BTTV_MAX-1)] = -1 }; |
| static int debug_latency; |
| static int disable_ir; |
| |
| static unsigned int fdsr; |
| |
| /* options */ |
| static unsigned int combfilter; |
| static unsigned int lumafilter; |
| static unsigned int automute = 1; |
| static unsigned int chroma_agc; |
| static unsigned int adc_crush = 1; |
| static unsigned int whitecrush_upper = 0xCF; |
| static unsigned int whitecrush_lower = 0x7F; |
| static unsigned int vcr_hack; |
| static unsigned int irq_iswitch; |
| static unsigned int uv_ratio = 50; |
| static unsigned int full_luma_range; |
| static unsigned int coring; |
| |
| /* API features (turn on/off stuff for testing) */ |
| static unsigned int v4l2 = 1; |
| |
| /* insmod args */ |
| module_param(bttv_verbose, int, 0644); |
| module_param(bttv_gpio, int, 0644); |
| module_param(bttv_debug, int, 0644); |
| module_param(irq_debug, int, 0644); |
| module_param(debug_latency, int, 0644); |
| module_param(disable_ir, int, 0444); |
| |
| module_param(fdsr, int, 0444); |
| module_param(gbuffers, int, 0444); |
| module_param(gbufsize, int, 0444); |
| module_param(reset_crop, int, 0444); |
| |
| module_param(v4l2, int, 0644); |
| module_param(bigendian, int, 0644); |
| module_param(irq_iswitch, int, 0644); |
| module_param(combfilter, int, 0444); |
| module_param(lumafilter, int, 0444); |
| module_param(automute, int, 0444); |
| module_param(chroma_agc, int, 0444); |
| module_param(adc_crush, int, 0444); |
| module_param(whitecrush_upper, int, 0444); |
| module_param(whitecrush_lower, int, 0444); |
| module_param(vcr_hack, int, 0444); |
| module_param(uv_ratio, int, 0444); |
| module_param(full_luma_range, int, 0444); |
| module_param(coring, int, 0444); |
| |
| module_param_array(radio, int, NULL, 0444); |
| module_param_array(video_nr, int, NULL, 0444); |
| module_param_array(radio_nr, int, NULL, 0444); |
| module_param_array(vbi_nr, int, NULL, 0444); |
| |
| MODULE_PARM_DESC(radio,"The TV card supports radio, default is 0 (no)"); |
| MODULE_PARM_DESC(bigendian,"byte order of the framebuffer, default is native endian"); |
| MODULE_PARM_DESC(bttv_verbose,"verbose startup messages, default is 1 (yes)"); |
| MODULE_PARM_DESC(bttv_gpio,"log gpio changes, default is 0 (no)"); |
| MODULE_PARM_DESC(bttv_debug,"debug messages, default is 0 (no)"); |
| MODULE_PARM_DESC(irq_debug,"irq handler debug messages, default is 0 (no)"); |
| MODULE_PARM_DESC(disable_ir, "disable infrared remote support"); |
| MODULE_PARM_DESC(gbuffers,"number of capture buffers. range 2-32, default 8"); |
| MODULE_PARM_DESC(gbufsize,"size of the capture buffers, default is 0x208000"); |
| MODULE_PARM_DESC(reset_crop,"reset cropping parameters at open(), default " |
| "is 1 (yes) for compatibility with older applications"); |
| MODULE_PARM_DESC(automute,"mute audio on bad/missing video signal, default is 1 (yes)"); |
| MODULE_PARM_DESC(chroma_agc,"enables the AGC of chroma signal, default is 0 (no)"); |
| MODULE_PARM_DESC(adc_crush,"enables the luminance ADC crush, default is 1 (yes)"); |
| MODULE_PARM_DESC(whitecrush_upper,"sets the white crush upper value, default is 207"); |
| MODULE_PARM_DESC(whitecrush_lower,"sets the white crush lower value, default is 127"); |
| MODULE_PARM_DESC(vcr_hack,"enables the VCR hack (improves synch on poor VCR tapes), default is 0 (no)"); |
| MODULE_PARM_DESC(irq_iswitch,"switch inputs in irq handler"); |
| MODULE_PARM_DESC(uv_ratio,"ratio between u and v gains, default is 50"); |
| MODULE_PARM_DESC(full_luma_range,"use the full luma range, default is 0 (no)"); |
| MODULE_PARM_DESC(coring,"set the luma coring level, default is 0 (no)"); |
| MODULE_PARM_DESC(video_nr, "video device numbers"); |
| MODULE_PARM_DESC(vbi_nr, "vbi device numbers"); |
| MODULE_PARM_DESC(radio_nr, "radio device numbers"); |
| |
| MODULE_DESCRIPTION("bttv - v4l/v4l2 driver module for bt848/878 based cards"); |
| MODULE_AUTHOR("Ralph Metzler & Marcus Metzler & Gerd Knorr"); |
| MODULE_LICENSE("GPL"); |
| MODULE_VERSION(BTTV_VERSION); |
| |
| /* ----------------------------------------------------------------------- */ |
| /* sysfs */ |
| |
| static ssize_t show_card(struct device *cd, |
| struct device_attribute *attr, char *buf) |
| { |
| struct video_device *vfd = container_of(cd, struct video_device, dev); |
| struct bttv *btv = video_get_drvdata(vfd); |
| return sprintf(buf, "%d\n", btv ? btv->c.type : UNSET); |
| } |
| static DEVICE_ATTR(card, S_IRUGO, show_card, NULL); |
| |
| /* ----------------------------------------------------------------------- */ |
| /* dvb auto-load setup */ |
| #if defined(CONFIG_MODULES) && defined(MODULE) |
| static void request_module_async(struct work_struct *work) |
| { |
| request_module("dvb-bt8xx"); |
| } |
| |
| static void request_modules(struct bttv *dev) |
| { |
| INIT_WORK(&dev->request_module_wk, request_module_async); |
| schedule_work(&dev->request_module_wk); |
| } |
| |
| static void flush_request_modules(struct bttv *dev) |
| { |
| flush_work_sync(&dev->request_module_wk); |
| } |
| #else |
| #define request_modules(dev) |
| #define flush_request_modules(dev) |
| #endif /* CONFIG_MODULES */ |
| |
| |
| /* ----------------------------------------------------------------------- */ |
| /* static data */ |
| |
| /* special timing tables from conexant... */ |
| static u8 SRAM_Table[][60] = |
| { |
| /* PAL digital input over GPIO[7:0] */ |
| { |
| 45, // 45 bytes following |
| 0x36,0x11,0x01,0x00,0x90,0x02,0x05,0x10,0x04,0x16, |
| 0x12,0x05,0x11,0x00,0x04,0x12,0xC0,0x00,0x31,0x00, |
| 0x06,0x51,0x08,0x03,0x89,0x08,0x07,0xC0,0x44,0x00, |
| 0x81,0x01,0x01,0xA9,0x0D,0x02,0x02,0x50,0x03,0x37, |
| 0x37,0x00,0xAF,0x21,0x00 |
| }, |
| /* NTSC digital input over GPIO[7:0] */ |
| { |
| 51, // 51 bytes following |
| 0x0C,0xC0,0x00,0x00,0x90,0x02,0x03,0x10,0x03,0x06, |
| 0x10,0x04,0x12,0x12,0x05,0x02,0x13,0x04,0x19,0x00, |
| 0x04,0x39,0x00,0x06,0x59,0x08,0x03,0x83,0x08,0x07, |
| 0x03,0x50,0x00,0xC0,0x40,0x00,0x86,0x01,0x01,0xA6, |
| 0x0D,0x02,0x03,0x11,0x01,0x05,0x37,0x00,0xAC,0x21, |
| 0x00, |
| }, |
| // TGB_NTSC392 // quartzsight |
| // This table has been modified to be used for Fusion Rev D |
| { |
| 0x2A, // size of table = 42 |
| 0x06, 0x08, 0x04, 0x0a, 0xc0, 0x00, 0x18, 0x08, 0x03, 0x24, |
| 0x08, 0x07, 0x02, 0x90, 0x02, 0x08, 0x10, 0x04, 0x0c, 0x10, |
| 0x05, 0x2c, 0x11, 0x04, 0x55, 0x48, 0x00, 0x05, 0x50, 0x00, |
| 0xbf, 0x0c, 0x02, 0x2f, 0x3d, 0x00, 0x2f, 0x3f, 0x00, 0xc3, |
| 0x20, 0x00 |
| } |
| }; |
| |
| /* minhdelayx1 first video pixel we can capture on a line and |
| hdelayx1 start of active video, both relative to rising edge of |
| /HRESET pulse (0H) in 1 / fCLKx1. |
| swidth width of active video and |
| totalwidth total line width, both in 1 / fCLKx1. |
| sqwidth total line width in square pixels. |
| vdelay start of active video in 2 * field lines relative to |
| trailing edge of /VRESET pulse (VDELAY register). |
| sheight height of active video in 2 * field lines. |
| videostart0 ITU-R frame line number of the line corresponding |
| to vdelay in the first field. */ |
| #define CROPCAP(minhdelayx1, hdelayx1, swidth, totalwidth, sqwidth, \ |
| vdelay, sheight, videostart0) \ |
| .cropcap.bounds.left = minhdelayx1, \ |
| /* * 2 because vertically we count field lines times two, */ \ |
| /* e.g. 23 * 2 to 23 * 2 + 576 in PAL-BGHI defrect. */ \ |
| .cropcap.bounds.top = (videostart0) * 2 - (vdelay) + MIN_VDELAY, \ |
| /* 4 is a safety margin at the end of the line. */ \ |
| .cropcap.bounds.width = (totalwidth) - (minhdelayx1) - 4, \ |
| .cropcap.bounds.height = (sheight) + (vdelay) - MIN_VDELAY, \ |
| .cropcap.defrect.left = hdelayx1, \ |
| .cropcap.defrect.top = (videostart0) * 2, \ |
| .cropcap.defrect.width = swidth, \ |
| .cropcap.defrect.height = sheight, \ |
| .cropcap.pixelaspect.numerator = totalwidth, \ |
| .cropcap.pixelaspect.denominator = sqwidth, |
| |
| const struct bttv_tvnorm bttv_tvnorms[] = { |
| /* PAL-BDGHI */ |
| /* max. active video is actually 922, but 924 is divisible by 4 and 3! */ |
| /* actually, max active PAL with HSCALE=0 is 948, NTSC is 768 - nil */ |
| { |
| .v4l2_id = V4L2_STD_PAL, |
| .name = "PAL", |
| .Fsc = 35468950, |
| .swidth = 924, |
| .sheight = 576, |
| .totalwidth = 1135, |
| .adelay = 0x7f, |
| .bdelay = 0x72, |
| .iform = (BT848_IFORM_PAL_BDGHI|BT848_IFORM_XT1), |
| .scaledtwidth = 1135, |
| .hdelayx1 = 186, |
| .hactivex1 = 924, |
| .vdelay = 0x20, |
| .vbipack = 255, /* min (2048 / 4, 0x1ff) & 0xff */ |
| .sram = 0, |
| /* ITU-R frame line number of the first VBI line |
| we can capture, of the first and second field. |
| The last line is determined by cropcap.bounds. */ |
| .vbistart = { 7, 320 }, |
| CROPCAP(/* minhdelayx1 */ 68, |
| /* hdelayx1 */ 186, |
| /* Should be (768 * 1135 + 944 / 2) / 944. |
| cropcap.defrect is used for image width |
| checks, so we keep the old value 924. */ |
| /* swidth */ 924, |
| /* totalwidth */ 1135, |
| /* sqwidth */ 944, |
| /* vdelay */ 0x20, |
| /* sheight */ 576, |
| /* videostart0 */ 23) |
| /* bt878 (and bt848?) can capture another |
| line below active video. */ |
| .cropcap.bounds.height = (576 + 2) + 0x20 - 2, |
| },{ |
| .v4l2_id = V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_KR, |
| .name = "NTSC", |
| .Fsc = 28636363, |
| .swidth = 768, |
| .sheight = 480, |
| .totalwidth = 910, |
| .adelay = 0x68, |
| .bdelay = 0x5d, |
| .iform = (BT848_IFORM_NTSC|BT848_IFORM_XT0), |
| .scaledtwidth = 910, |
| .hdelayx1 = 128, |
| .hactivex1 = 910, |
| .vdelay = 0x1a, |
| .vbipack = 144, /* min (1600 / 4, 0x1ff) & 0xff */ |
| .sram = 1, |
| .vbistart = { 10, 273 }, |
| CROPCAP(/* minhdelayx1 */ 68, |
| /* hdelayx1 */ 128, |
| /* Should be (640 * 910 + 780 / 2) / 780? */ |
| /* swidth */ 768, |
| /* totalwidth */ 910, |
| /* sqwidth */ 780, |
| /* vdelay */ 0x1a, |
| /* sheight */ 480, |
| /* videostart0 */ 23) |
| },{ |
| .v4l2_id = V4L2_STD_SECAM, |
| .name = "SECAM", |
| .Fsc = 35468950, |
| .swidth = 924, |
| .sheight = 576, |
| .totalwidth = 1135, |
| .adelay = 0x7f, |
| .bdelay = 0xb0, |
| .iform = (BT848_IFORM_SECAM|BT848_IFORM_XT1), |
| .scaledtwidth = 1135, |
| .hdelayx1 = 186, |
| .hactivex1 = 922, |
| .vdelay = 0x20, |
| .vbipack = 255, |
| .sram = 0, /* like PAL, correct? */ |
| .vbistart = { 7, 320 }, |
| CROPCAP(/* minhdelayx1 */ 68, |
| /* hdelayx1 */ 186, |
| /* swidth */ 924, |
| /* totalwidth */ 1135, |
| /* sqwidth */ 944, |
| /* vdelay */ 0x20, |
| /* sheight */ 576, |
| /* videostart0 */ 23) |
| },{ |
| .v4l2_id = V4L2_STD_PAL_Nc, |
| .name = "PAL-Nc", |
| .Fsc = 28636363, |
| .swidth = 640, |
| .sheight = 576, |
| .totalwidth = 910, |
| .adelay = 0x68, |
| .bdelay = 0x5d, |
| .iform = (BT848_IFORM_PAL_NC|BT848_IFORM_XT0), |
| .scaledtwidth = 780, |
| .hdelayx1 = 130, |
| .hactivex1 = 734, |
| .vdelay = 0x1a, |
| .vbipack = 144, |
| .sram = -1, |
| .vbistart = { 7, 320 }, |
| CROPCAP(/* minhdelayx1 */ 68, |
| /* hdelayx1 */ 130, |
| /* swidth */ (640 * 910 + 780 / 2) / 780, |
| /* totalwidth */ 910, |
| /* sqwidth */ 780, |
| /* vdelay */ 0x1a, |
| /* sheight */ 576, |
| /* videostart0 */ 23) |
| },{ |
| .v4l2_id = V4L2_STD_PAL_M, |
| .name = "PAL-M", |
| .Fsc = 28636363, |
| .swidth = 640, |
| .sheight = 480, |
| .totalwidth = 910, |
| .adelay = 0x68, |
| .bdelay = 0x5d, |
| .iform = (BT848_IFORM_PAL_M|BT848_IFORM_XT0), |
| .scaledtwidth = 780, |
| .hdelayx1 = 135, |
| .hactivex1 = 754, |
| .vdelay = 0x1a, |
| .vbipack = 144, |
| .sram = -1, |
| .vbistart = { 10, 273 }, |
| CROPCAP(/* minhdelayx1 */ 68, |
| /* hdelayx1 */ 135, |
| /* swidth */ (640 * 910 + 780 / 2) / 780, |
| /* totalwidth */ 910, |
| /* sqwidth */ 780, |
| /* vdelay */ 0x1a, |
| /* sheight */ 480, |
| /* videostart0 */ 23) |
| },{ |
| .v4l2_id = V4L2_STD_PAL_N, |
| .name = "PAL-N", |
| .Fsc = 35468950, |
| .swidth = 768, |
| .sheight = 576, |
| .totalwidth = 1135, |
| .adelay = 0x7f, |
| .bdelay = 0x72, |
| .iform = (BT848_IFORM_PAL_N|BT848_IFORM_XT1), |
| .scaledtwidth = 944, |
| .hdelayx1 = 186, |
| .hactivex1 = 922, |
| .vdelay = 0x20, |
| .vbipack = 144, |
| .sram = -1, |
| .vbistart = { 7, 320 }, |
| CROPCAP(/* minhdelayx1 */ 68, |
| /* hdelayx1 */ 186, |
| /* swidth */ (768 * 1135 + 944 / 2) / 944, |
| /* totalwidth */ 1135, |
| /* sqwidth */ 944, |
| /* vdelay */ 0x20, |
| /* sheight */ 576, |
| /* videostart0 */ 23) |
| },{ |
| .v4l2_id = V4L2_STD_NTSC_M_JP, |
| .name = "NTSC-JP", |
| .Fsc = 28636363, |
| .swidth = 640, |
| .sheight = 480, |
| .totalwidth = 910, |
| .adelay = 0x68, |
| .bdelay = 0x5d, |
| .iform = (BT848_IFORM_NTSC_J|BT848_IFORM_XT0), |
| .scaledtwidth = 780, |
| .hdelayx1 = 135, |
| .hactivex1 = 754, |
| .vdelay = 0x16, |
| .vbipack = 144, |
| .sram = -1, |
| .vbistart = { 10, 273 }, |
| CROPCAP(/* minhdelayx1 */ 68, |
| /* hdelayx1 */ 135, |
| /* swidth */ (640 * 910 + 780 / 2) / 780, |
| /* totalwidth */ 910, |
| /* sqwidth */ 780, |
| /* vdelay */ 0x16, |
| /* sheight */ 480, |
| /* videostart0 */ 23) |
| },{ |
| /* that one hopefully works with the strange timing |
| * which video recorders produce when playing a NTSC |
| * tape on a PAL TV ... */ |
| .v4l2_id = V4L2_STD_PAL_60, |
| .name = "PAL-60", |
| .Fsc = 35468950, |
| .swidth = 924, |
| .sheight = 480, |
| .totalwidth = 1135, |
| .adelay = 0x7f, |
| .bdelay = 0x72, |
| .iform = (BT848_IFORM_PAL_BDGHI|BT848_IFORM_XT1), |
| .scaledtwidth = 1135, |
| .hdelayx1 = 186, |
| .hactivex1 = 924, |
| .vdelay = 0x1a, |
| .vbipack = 255, |
| .vtotal = 524, |
| .sram = -1, |
| .vbistart = { 10, 273 }, |
| CROPCAP(/* minhdelayx1 */ 68, |
| /* hdelayx1 */ 186, |
| /* swidth */ 924, |
| /* totalwidth */ 1135, |
| /* sqwidth */ 944, |
| /* vdelay */ 0x1a, |
| /* sheight */ 480, |
| /* videostart0 */ 23) |
| } |
| }; |
| static const unsigned int BTTV_TVNORMS = ARRAY_SIZE(bttv_tvnorms); |
| |
| /* ----------------------------------------------------------------------- */ |
| /* bttv format list |
| packed pixel formats must come first */ |
| static const struct bttv_format formats[] = { |
| { |
| .name = "8 bpp, gray", |
| .fourcc = V4L2_PIX_FMT_GREY, |
| .btformat = BT848_COLOR_FMT_Y8, |
| .depth = 8, |
| .flags = FORMAT_FLAGS_PACKED, |
| },{ |
| .name = "8 bpp, dithered color", |
| .fourcc = V4L2_PIX_FMT_HI240, |
| .btformat = BT848_COLOR_FMT_RGB8, |
| .depth = 8, |
| .flags = FORMAT_FLAGS_PACKED | FORMAT_FLAGS_DITHER, |
| },{ |
| .name = "15 bpp RGB, le", |
| .fourcc = V4L2_PIX_FMT_RGB555, |
| .btformat = BT848_COLOR_FMT_RGB15, |
| .depth = 16, |
| .flags = FORMAT_FLAGS_PACKED, |
| },{ |
| .name = "15 bpp RGB, be", |
| .fourcc = V4L2_PIX_FMT_RGB555X, |
| .btformat = BT848_COLOR_FMT_RGB15, |
| .btswap = 0x03, /* byteswap */ |
| .depth = 16, |
| .flags = FORMAT_FLAGS_PACKED, |
| },{ |
| .name = "16 bpp RGB, le", |
| .fourcc = V4L2_PIX_FMT_RGB565, |
| .btformat = BT848_COLOR_FMT_RGB16, |
| .depth = 16, |
| .flags = FORMAT_FLAGS_PACKED, |
| },{ |
| .name = "16 bpp RGB, be", |
| .fourcc = V4L2_PIX_FMT_RGB565X, |
| .btformat = BT848_COLOR_FMT_RGB16, |
| .btswap = 0x03, /* byteswap */ |
| .depth = 16, |
| .flags = FORMAT_FLAGS_PACKED, |
| },{ |
| .name = "24 bpp RGB, le", |
| .fourcc = V4L2_PIX_FMT_BGR24, |
| .btformat = BT848_COLOR_FMT_RGB24, |
| .depth = 24, |
| .flags = FORMAT_FLAGS_PACKED, |
| },{ |
| .name = "32 bpp RGB, le", |
| .fourcc = V4L2_PIX_FMT_BGR32, |
| .btformat = BT848_COLOR_FMT_RGB32, |
| .depth = 32, |
| .flags = FORMAT_FLAGS_PACKED, |
| },{ |
| .name = "32 bpp RGB, be", |
| .fourcc = V4L2_PIX_FMT_RGB32, |
| .btformat = BT848_COLOR_FMT_RGB32, |
| .btswap = 0x0f, /* byte+word swap */ |
| .depth = 32, |
| .flags = FORMAT_FLAGS_PACKED, |
| },{ |
| .name = "4:2:2, packed, YUYV", |
| .fourcc = V4L2_PIX_FMT_YUYV, |
| .btformat = BT848_COLOR_FMT_YUY2, |
| .depth = 16, |
| .flags = FORMAT_FLAGS_PACKED, |
| },{ |
| .name = "4:2:2, packed, YUYV", |
| .fourcc = V4L2_PIX_FMT_YUYV, |
| .btformat = BT848_COLOR_FMT_YUY2, |
| .depth = 16, |
| .flags = FORMAT_FLAGS_PACKED, |
| },{ |
| .name = "4:2:2, packed, UYVY", |
| .fourcc = V4L2_PIX_FMT_UYVY, |
| .btformat = BT848_COLOR_FMT_YUY2, |
| .btswap = 0x03, /* byteswap */ |
| .depth = 16, |
| .flags = FORMAT_FLAGS_PACKED, |
| },{ |
| .name = "4:2:2, planar, Y-Cb-Cr", |
| .fourcc = V4L2_PIX_FMT_YUV422P, |
| .btformat = BT848_COLOR_FMT_YCrCb422, |
| .depth = 16, |
| .flags = FORMAT_FLAGS_PLANAR, |
| .hshift = 1, |
| .vshift = 0, |
| },{ |
| .name = "4:2:0, planar, Y-Cb-Cr", |
| .fourcc = V4L2_PIX_FMT_YUV420, |
| .btformat = BT848_COLOR_FMT_YCrCb422, |
| .depth = 12, |
| .flags = FORMAT_FLAGS_PLANAR, |
| .hshift = 1, |
| .vshift = 1, |
| },{ |
| .name = "4:2:0, planar, Y-Cr-Cb", |
| .fourcc = V4L2_PIX_FMT_YVU420, |
| .btformat = BT848_COLOR_FMT_YCrCb422, |
| .depth = 12, |
| .flags = FORMAT_FLAGS_PLANAR | FORMAT_FLAGS_CrCb, |
| .hshift = 1, |
| .vshift = 1, |
| },{ |
| .name = "4:1:1, planar, Y-Cb-Cr", |
| .fourcc = V4L2_PIX_FMT_YUV411P, |
| .btformat = BT848_COLOR_FMT_YCrCb411, |
| .depth = 12, |
| .flags = FORMAT_FLAGS_PLANAR, |
| .hshift = 2, |
| .vshift = 0, |
| },{ |
| .name = "4:1:0, planar, Y-Cb-Cr", |
| .fourcc = V4L2_PIX_FMT_YUV410, |
| .btformat = BT848_COLOR_FMT_YCrCb411, |
| .depth = 9, |
| .flags = FORMAT_FLAGS_PLANAR, |
| .hshift = 2, |
| .vshift = 2, |
| },{ |
| .name = "4:1:0, planar, Y-Cr-Cb", |
| .fourcc = V4L2_PIX_FMT_YVU410, |
| .btformat = BT848_COLOR_FMT_YCrCb411, |
| .depth = 9, |
| .flags = FORMAT_FLAGS_PLANAR | FORMAT_FLAGS_CrCb, |
| .hshift = 2, |
| .vshift = 2, |
| },{ |
| .name = "raw scanlines", |
| .fourcc = -1, |
| .btformat = BT848_COLOR_FMT_RAW, |
| .depth = 8, |
| .flags = FORMAT_FLAGS_RAW, |
| } |
| }; |
| static const unsigned int FORMATS = ARRAY_SIZE(formats); |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| #define V4L2_CID_PRIVATE_CHROMA_AGC (V4L2_CID_PRIVATE_BASE + 0) |
| #define V4L2_CID_PRIVATE_COMBFILTER (V4L2_CID_PRIVATE_BASE + 1) |
| #define V4L2_CID_PRIVATE_AUTOMUTE (V4L2_CID_PRIVATE_BASE + 2) |
| #define V4L2_CID_PRIVATE_LUMAFILTER (V4L2_CID_PRIVATE_BASE + 3) |
| #define V4L2_CID_PRIVATE_AGC_CRUSH (V4L2_CID_PRIVATE_BASE + 4) |
| #define V4L2_CID_PRIVATE_VCR_HACK (V4L2_CID_PRIVATE_BASE + 5) |
| #define V4L2_CID_PRIVATE_WHITECRUSH_UPPER (V4L2_CID_PRIVATE_BASE + 6) |
| #define V4L2_CID_PRIVATE_WHITECRUSH_LOWER (V4L2_CID_PRIVATE_BASE + 7) |
| #define V4L2_CID_PRIVATE_UV_RATIO (V4L2_CID_PRIVATE_BASE + 8) |
| #define V4L2_CID_PRIVATE_FULL_LUMA_RANGE (V4L2_CID_PRIVATE_BASE + 9) |
| #define V4L2_CID_PRIVATE_CORING (V4L2_CID_PRIVATE_BASE + 10) |
| #define V4L2_CID_PRIVATE_LASTP1 (V4L2_CID_PRIVATE_BASE + 11) |
| |
| static const struct v4l2_queryctrl no_ctl = { |
| .name = "42", |
| .flags = V4L2_CTRL_FLAG_DISABLED, |
| }; |
| static const struct v4l2_queryctrl bttv_ctls[] = { |
| /* --- video --- */ |
| { |
| .id = V4L2_CID_BRIGHTNESS, |
| .name = "Brightness", |
| .minimum = 0, |
| .maximum = 65535, |
| .step = 256, |
| .default_value = 32768, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| },{ |
| .id = V4L2_CID_CONTRAST, |
| .name = "Contrast", |
| .minimum = 0, |
| .maximum = 65535, |
| .step = 128, |
| .default_value = 32768, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| },{ |
| .id = V4L2_CID_SATURATION, |
| .name = "Saturation", |
| .minimum = 0, |
| .maximum = 65535, |
| .step = 128, |
| .default_value = 32768, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| },{ |
| .id = V4L2_CID_HUE, |
| .name = "Hue", |
| .minimum = 0, |
| .maximum = 65535, |
| .step = 256, |
| .default_value = 32768, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| }, |
| /* --- audio --- */ |
| { |
| .id = V4L2_CID_AUDIO_MUTE, |
| .name = "Mute", |
| .minimum = 0, |
| .maximum = 1, |
| .type = V4L2_CTRL_TYPE_BOOLEAN, |
| },{ |
| .id = V4L2_CID_AUDIO_VOLUME, |
| .name = "Volume", |
| .minimum = 0, |
| .maximum = 65535, |
| .step = 65535/100, |
| .default_value = 65535, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| },{ |
| .id = V4L2_CID_AUDIO_BALANCE, |
| .name = "Balance", |
| .minimum = 0, |
| .maximum = 65535, |
| .step = 65535/100, |
| .default_value = 32768, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| },{ |
| .id = V4L2_CID_AUDIO_BASS, |
| .name = "Bass", |
| .minimum = 0, |
| .maximum = 65535, |
| .step = 65535/100, |
| .default_value = 32768, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| },{ |
| .id = V4L2_CID_AUDIO_TREBLE, |
| .name = "Treble", |
| .minimum = 0, |
| .maximum = 65535, |
| .step = 65535/100, |
| .default_value = 32768, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| }, |
| /* --- private --- */ |
| { |
| .id = V4L2_CID_PRIVATE_CHROMA_AGC, |
| .name = "chroma agc", |
| .minimum = 0, |
| .maximum = 1, |
| .type = V4L2_CTRL_TYPE_BOOLEAN, |
| },{ |
| .id = V4L2_CID_PRIVATE_COMBFILTER, |
| .name = "combfilter", |
| .minimum = 0, |
| .maximum = 1, |
| .type = V4L2_CTRL_TYPE_BOOLEAN, |
| },{ |
| .id = V4L2_CID_PRIVATE_AUTOMUTE, |
| .name = "automute", |
| .minimum = 0, |
| .maximum = 1, |
| .type = V4L2_CTRL_TYPE_BOOLEAN, |
| },{ |
| .id = V4L2_CID_PRIVATE_LUMAFILTER, |
| .name = "luma decimation filter", |
| .minimum = 0, |
| .maximum = 1, |
| .type = V4L2_CTRL_TYPE_BOOLEAN, |
| },{ |
| .id = V4L2_CID_PRIVATE_AGC_CRUSH, |
| .name = "agc crush", |
| .minimum = 0, |
| .maximum = 1, |
| .type = V4L2_CTRL_TYPE_BOOLEAN, |
| },{ |
| .id = V4L2_CID_PRIVATE_VCR_HACK, |
| .name = "vcr hack", |
| .minimum = 0, |
| .maximum = 1, |
| .type = V4L2_CTRL_TYPE_BOOLEAN, |
| },{ |
| .id = V4L2_CID_PRIVATE_WHITECRUSH_UPPER, |
| .name = "whitecrush upper", |
| .minimum = 0, |
| .maximum = 255, |
| .step = 1, |
| .default_value = 0xCF, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| },{ |
| .id = V4L2_CID_PRIVATE_WHITECRUSH_LOWER, |
| .name = "whitecrush lower", |
| .minimum = 0, |
| .maximum = 255, |
| .step = 1, |
| .default_value = 0x7F, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| },{ |
| .id = V4L2_CID_PRIVATE_UV_RATIO, |
| .name = "uv ratio", |
| .minimum = 0, |
| .maximum = 100, |
| .step = 1, |
| .default_value = 50, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| },{ |
| .id = V4L2_CID_PRIVATE_FULL_LUMA_RANGE, |
| .name = "full luma range", |
| .minimum = 0, |
| .maximum = 1, |
| .type = V4L2_CTRL_TYPE_BOOLEAN, |
| },{ |
| .id = V4L2_CID_PRIVATE_CORING, |
| .name = "coring", |
| .minimum = 0, |
| .maximum = 3, |
| .step = 1, |
| .default_value = 0, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| } |
| |
| |
| |
| }; |
| |
| static const struct v4l2_queryctrl *ctrl_by_id(int id) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(bttv_ctls); i++) |
| if (bttv_ctls[i].id == id) |
| return bttv_ctls+i; |
| |
| return NULL; |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| /* resource management */ |
| |
| /* |
| RESOURCE_ allocated by freed by |
| |
| VIDEO_READ bttv_read 1) bttv_read 2) |
| |
| VIDEO_STREAM VIDIOC_STREAMON VIDIOC_STREAMOFF |
| VIDIOC_QBUF 1) bttv_release |
| VIDIOCMCAPTURE 1) |
| |
| OVERLAY VIDIOCCAPTURE on VIDIOCCAPTURE off |
| VIDIOC_OVERLAY on VIDIOC_OVERLAY off |
| 3) bttv_release |
| |
| VBI VIDIOC_STREAMON VIDIOC_STREAMOFF |
| VIDIOC_QBUF 1) bttv_release |
| bttv_read, bttv_poll 1) 4) |
| |
| 1) The resource must be allocated when we enter buffer prepare functions |
| and remain allocated while buffers are in the DMA queue. |
| 2) This is a single frame read. |
| 3) VIDIOC_S_FBUF and VIDIOC_S_FMT (OVERLAY) still work when |
| RESOURCE_OVERLAY is allocated. |
| 4) This is a continuous read, implies VIDIOC_STREAMON. |
| |
| Note this driver permits video input and standard changes regardless if |
| resources are allocated. |
| */ |
| |
| #define VBI_RESOURCES (RESOURCE_VBI) |
| #define VIDEO_RESOURCES (RESOURCE_VIDEO_READ | \ |
| RESOURCE_VIDEO_STREAM | \ |
| RESOURCE_OVERLAY) |
| |
| static |
| int check_alloc_btres_lock(struct bttv *btv, struct bttv_fh *fh, int bit) |
| { |
| int xbits; /* mutual exclusive resources */ |
| |
| if (fh->resources & bit) |
| /* have it already allocated */ |
| return 1; |
| |
| xbits = bit; |
| if (bit & (RESOURCE_VIDEO_READ | RESOURCE_VIDEO_STREAM)) |
| xbits |= RESOURCE_VIDEO_READ | RESOURCE_VIDEO_STREAM; |
| |
| /* is it free? */ |
| if (btv->resources & xbits) { |
| /* no, someone else uses it */ |
| goto fail; |
| } |
| |
| if ((bit & VIDEO_RESOURCES) |
| && 0 == (btv->resources & VIDEO_RESOURCES)) { |
| /* Do crop - use current, don't - use default parameters. */ |
| __s32 top = btv->crop[!!fh->do_crop].rect.top; |
| |
| if (btv->vbi_end > top) |
| goto fail; |
| |
| /* We cannot capture the same line as video and VBI data. |
| Claim scan lines crop[].rect.top to bottom. */ |
| btv->crop_start = top; |
| } else if (bit & VBI_RESOURCES) { |
| __s32 end = fh->vbi_fmt.end; |
| |
| if (end > btv->crop_start) |
| goto fail; |
| |
| /* Claim scan lines above fh->vbi_fmt.end. */ |
| btv->vbi_end = end; |
| } |
| |
| /* it's free, grab it */ |
| fh->resources |= bit; |
| btv->resources |= bit; |
| return 1; |
| |
| fail: |
| return 0; |
| } |
| |
| static |
| int check_btres(struct bttv_fh *fh, int bit) |
| { |
| return (fh->resources & bit); |
| } |
| |
| static |
| int locked_btres(struct bttv *btv, int bit) |
| { |
| return (btv->resources & bit); |
| } |
| |
| /* Call with btv->lock down. */ |
| static void |
| disclaim_vbi_lines(struct bttv *btv) |
| { |
| btv->vbi_end = 0; |
| } |
| |
| /* Call with btv->lock down. */ |
| static void |
| disclaim_video_lines(struct bttv *btv) |
| { |
| const struct bttv_tvnorm *tvnorm; |
| u8 crop; |
| |
| tvnorm = &bttv_tvnorms[btv->tvnorm]; |
| btv->crop_start = tvnorm->cropcap.bounds.top |
| + tvnorm->cropcap.bounds.height; |
| |
| /* VBI capturing ends at VDELAY, start of video capturing, no |
| matter how many lines the VBI RISC program expects. When video |
| capturing is off, it shall no longer "preempt" VBI capturing, |
| so we set VDELAY to maximum. */ |
| crop = btread(BT848_E_CROP) | 0xc0; |
| btwrite(crop, BT848_E_CROP); |
| btwrite(0xfe, BT848_E_VDELAY_LO); |
| btwrite(crop, BT848_O_CROP); |
| btwrite(0xfe, BT848_O_VDELAY_LO); |
| } |
| |
| static |
| void free_btres_lock(struct bttv *btv, struct bttv_fh *fh, int bits) |
| { |
| if ((fh->resources & bits) != bits) { |
| /* trying to free resources not allocated by us ... */ |
| pr_err("BUG! (btres)\n"); |
| } |
| fh->resources &= ~bits; |
| btv->resources &= ~bits; |
| |
| bits = btv->resources; |
| |
| if (0 == (bits & VIDEO_RESOURCES)) |
| disclaim_video_lines(btv); |
| |
| if (0 == (bits & VBI_RESOURCES)) |
| disclaim_vbi_lines(btv); |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| /* If Bt848a or Bt849, use PLL for PAL/SECAM and crystal for NTSC */ |
| |
| /* Frequency = (F_input / PLL_X) * PLL_I.PLL_F/PLL_C |
| PLL_X = Reference pre-divider (0=1, 1=2) |
| PLL_C = Post divider (0=6, 1=4) |
| PLL_I = Integer input |
| PLL_F = Fractional input |
| |
| F_input = 28.636363 MHz: |
| PAL (CLKx2 = 35.46895 MHz): PLL_X = 1, PLL_I = 0x0E, PLL_F = 0xDCF9, PLL_C = 0 |
| */ |
| |
| static void set_pll_freq(struct bttv *btv, unsigned int fin, unsigned int fout) |
| { |
| unsigned char fl, fh, fi; |
| |
| /* prevent overflows */ |
| fin/=4; |
| fout/=4; |
| |
| fout*=12; |
| fi=fout/fin; |
| |
| fout=(fout%fin)*256; |
| fh=fout/fin; |
| |
| fout=(fout%fin)*256; |
| fl=fout/fin; |
| |
| btwrite(fl, BT848_PLL_F_LO); |
| btwrite(fh, BT848_PLL_F_HI); |
| btwrite(fi|BT848_PLL_X, BT848_PLL_XCI); |
| } |
| |
| static void set_pll(struct bttv *btv) |
| { |
| int i; |
| |
| if (!btv->pll.pll_crystal) |
| return; |
| |
| if (btv->pll.pll_ofreq == btv->pll.pll_current) { |
| dprintk("%d: PLL: no change required\n", btv->c.nr); |
| return; |
| } |
| |
| if (btv->pll.pll_ifreq == btv->pll.pll_ofreq) { |
| /* no PLL needed */ |
| if (btv->pll.pll_current == 0) |
| return; |
| if (bttv_verbose) |
| pr_info("%d: PLL can sleep, using XTAL (%d)\n", |
| btv->c.nr, btv->pll.pll_ifreq); |
| btwrite(0x00,BT848_TGCTRL); |
| btwrite(0x00,BT848_PLL_XCI); |
| btv->pll.pll_current = 0; |
| return; |
| } |
| |
| if (bttv_verbose) |
| pr_info("%d: Setting PLL: %d => %d (needs up to 100ms)\n", |
| btv->c.nr, |
| btv->pll.pll_ifreq, btv->pll.pll_ofreq); |
| set_pll_freq(btv, btv->pll.pll_ifreq, btv->pll.pll_ofreq); |
| |
| for (i=0; i<10; i++) { |
| /* Let other people run while the PLL stabilizes */ |
| msleep(10); |
| |
| if (btread(BT848_DSTATUS) & BT848_DSTATUS_PLOCK) { |
| btwrite(0,BT848_DSTATUS); |
| } else { |
| btwrite(0x08,BT848_TGCTRL); |
| btv->pll.pll_current = btv->pll.pll_ofreq; |
| if (bttv_verbose) |
| pr_info("PLL set ok\n"); |
| return; |
| } |
| } |
| btv->pll.pll_current = -1; |
| if (bttv_verbose) |
| pr_info("Setting PLL failed\n"); |
| return; |
| } |
| |
| /* used to switch between the bt848's analog/digital video capture modes */ |
| static void bt848A_set_timing(struct bttv *btv) |
| { |
| int i, len; |
| int table_idx = bttv_tvnorms[btv->tvnorm].sram; |
| int fsc = bttv_tvnorms[btv->tvnorm].Fsc; |
| |
| if (btv->input == btv->dig) { |
| dprintk("%d: load digital timing table (table_idx=%d)\n", |
| btv->c.nr,table_idx); |
| |
| /* timing change...reset timing generator address */ |
| btwrite(0x00, BT848_TGCTRL); |
| btwrite(0x02, BT848_TGCTRL); |
| btwrite(0x00, BT848_TGCTRL); |
| |
| len=SRAM_Table[table_idx][0]; |
| for(i = 1; i <= len; i++) |
| btwrite(SRAM_Table[table_idx][i],BT848_TGLB); |
| btv->pll.pll_ofreq = 27000000; |
| |
| set_pll(btv); |
| btwrite(0x11, BT848_TGCTRL); |
| btwrite(0x41, BT848_DVSIF); |
| } else { |
| btv->pll.pll_ofreq = fsc; |
| set_pll(btv); |
| btwrite(0x0, BT848_DVSIF); |
| } |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| static void bt848_bright(struct bttv *btv, int bright) |
| { |
| int value; |
| |
| // printk("set bright: %d\n", bright); // DEBUG |
| btv->bright = bright; |
| |
| /* We want -128 to 127 we get 0-65535 */ |
| value = (bright >> 8) - 128; |
| btwrite(value & 0xff, BT848_BRIGHT); |
| } |
| |
| static void bt848_hue(struct bttv *btv, int hue) |
| { |
| int value; |
| |
| btv->hue = hue; |
| |
| /* -128 to 127 */ |
| value = (hue >> 8) - 128; |
| btwrite(value & 0xff, BT848_HUE); |
| } |
| |
| static void bt848_contrast(struct bttv *btv, int cont) |
| { |
| int value,hibit; |
| |
| btv->contrast = cont; |
| |
| /* 0-511 */ |
| value = (cont >> 7); |
| hibit = (value >> 6) & 4; |
| btwrite(value & 0xff, BT848_CONTRAST_LO); |
| btaor(hibit, ~4, BT848_E_CONTROL); |
| btaor(hibit, ~4, BT848_O_CONTROL); |
| } |
| |
| static void bt848_sat(struct bttv *btv, int color) |
| { |
| int val_u,val_v,hibits; |
| |
| btv->saturation = color; |
| |
| /* 0-511 for the color */ |
| val_u = ((color * btv->opt_uv_ratio) / 50) >> 7; |
| val_v = (((color * (100 - btv->opt_uv_ratio) / 50) >>7)*180L)/254; |
| hibits = (val_u >> 7) & 2; |
| hibits |= (val_v >> 8) & 1; |
| btwrite(val_u & 0xff, BT848_SAT_U_LO); |
| btwrite(val_v & 0xff, BT848_SAT_V_LO); |
| btaor(hibits, ~3, BT848_E_CONTROL); |
| btaor(hibits, ~3, BT848_O_CONTROL); |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| static int |
| video_mux(struct bttv *btv, unsigned int input) |
| { |
| int mux,mask2; |
| |
| if (input >= bttv_tvcards[btv->c.type].video_inputs) |
| return -EINVAL; |
| |
| /* needed by RemoteVideo MX */ |
| mask2 = bttv_tvcards[btv->c.type].gpiomask2; |
| if (mask2) |
| gpio_inout(mask2,mask2); |
| |
| if (input == btv->svhs) { |
| btor(BT848_CONTROL_COMP, BT848_E_CONTROL); |
| btor(BT848_CONTROL_COMP, BT848_O_CONTROL); |
| } else { |
| btand(~BT848_CONTROL_COMP, BT848_E_CONTROL); |
| btand(~BT848_CONTROL_COMP, BT848_O_CONTROL); |
| } |
| mux = bttv_muxsel(btv, input); |
| btaor(mux<<5, ~(3<<5), BT848_IFORM); |
| dprintk("%d: video mux: input=%d mux=%d\n", btv->c.nr, input, mux); |
| |
| /* card specific hook */ |
| if(bttv_tvcards[btv->c.type].muxsel_hook) |
| bttv_tvcards[btv->c.type].muxsel_hook (btv, input); |
| return 0; |
| } |
| |
| static char *audio_modes[] = { |
| "audio: tuner", "audio: radio", "audio: extern", |
| "audio: intern", "audio: mute" |
| }; |
| |
| static int |
| audio_mux(struct bttv *btv, int input, int mute) |
| { |
| int gpio_val, signal; |
| struct v4l2_control ctrl; |
| |
| gpio_inout(bttv_tvcards[btv->c.type].gpiomask, |
| bttv_tvcards[btv->c.type].gpiomask); |
| signal = btread(BT848_DSTATUS) & BT848_DSTATUS_HLOC; |
| |
| btv->mute = mute; |
| btv->audio = input; |
| |
| /* automute */ |
| mute = mute || (btv->opt_automute && !signal && !btv->radio_user); |
| |
| if (mute) |
| gpio_val = bttv_tvcards[btv->c.type].gpiomute; |
| else |
| gpio_val = bttv_tvcards[btv->c.type].gpiomux[input]; |
| |
| switch (btv->c.type) { |
| case BTTV_BOARD_VOODOOTV_FM: |
| case BTTV_BOARD_VOODOOTV_200: |
| gpio_val = bttv_tda9880_setnorm(btv, gpio_val); |
| break; |
| |
| default: |
| gpio_bits(bttv_tvcards[btv->c.type].gpiomask, gpio_val); |
| } |
| |
| if (bttv_gpio) |
| bttv_gpio_tracking(btv, audio_modes[mute ? 4 : input]); |
| if (in_interrupt()) |
| return 0; |
| |
| ctrl.id = V4L2_CID_AUDIO_MUTE; |
| ctrl.value = btv->mute; |
| bttv_call_all(btv, core, s_ctrl, &ctrl); |
| if (btv->sd_msp34xx) { |
| u32 in; |
| |
| /* Note: the inputs tuner/radio/extern/intern are translated |
| to msp routings. This assumes common behavior for all msp3400 |
| based TV cards. When this assumption fails, then the |
| specific MSP routing must be added to the card table. |
| For now this is sufficient. */ |
| switch (input) { |
| case TVAUDIO_INPUT_RADIO: |
| in = MSP_INPUT(MSP_IN_SCART2, MSP_IN_TUNER1, |
| MSP_DSP_IN_SCART, MSP_DSP_IN_SCART); |
| break; |
| case TVAUDIO_INPUT_EXTERN: |
| in = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1, |
| MSP_DSP_IN_SCART, MSP_DSP_IN_SCART); |
| break; |
| case TVAUDIO_INPUT_INTERN: |
| /* Yes, this is the same input as for RADIO. I doubt |
| if this is ever used. The only board with an INTERN |
| input is the BTTV_BOARD_AVERMEDIA98. I wonder how |
| that was tested. My guess is that the whole INTERN |
| input does not work. */ |
| in = MSP_INPUT(MSP_IN_SCART2, MSP_IN_TUNER1, |
| MSP_DSP_IN_SCART, MSP_DSP_IN_SCART); |
| break; |
| case TVAUDIO_INPUT_TUNER: |
| default: |
| /* This is the only card that uses TUNER2, and afaik, |
| is the only difference between the VOODOOTV_FM |
| and VOODOOTV_200 */ |
| if (btv->c.type == BTTV_BOARD_VOODOOTV_200) |
| in = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER2, \ |
| MSP_DSP_IN_TUNER, MSP_DSP_IN_TUNER); |
| else |
| in = MSP_INPUT_DEFAULT; |
| break; |
| } |
| v4l2_subdev_call(btv->sd_msp34xx, audio, s_routing, |
| in, MSP_OUTPUT_DEFAULT, 0); |
| } |
| if (btv->sd_tvaudio) { |
| v4l2_subdev_call(btv->sd_tvaudio, audio, s_routing, |
| input, 0, 0); |
| } |
| return 0; |
| } |
| |
| static inline int |
| audio_mute(struct bttv *btv, int mute) |
| { |
| return audio_mux(btv, btv->audio, mute); |
| } |
| |
| static inline int |
| audio_input(struct bttv *btv, int input) |
| { |
| return audio_mux(btv, input, btv->mute); |
| } |
| |
| static void |
| bttv_crop_calc_limits(struct bttv_crop *c) |
| { |
| /* Scale factor min. 1:1, max. 16:1. Min. image size |
| 48 x 32. Scaled width must be a multiple of 4. */ |
| |
| if (1) { |
| /* For bug compatibility with VIDIOCGCAP and image |
| size checks in earlier driver versions. */ |
| c->min_scaled_width = 48; |
| c->min_scaled_height = 32; |
| } else { |
| c->min_scaled_width = |
| (max(48, c->rect.width >> 4) + 3) & ~3; |
| c->min_scaled_height = |
| max(32, c->rect.height >> 4); |
| } |
| |
| c->max_scaled_width = c->rect.width & ~3; |
| c->max_scaled_height = c->rect.height; |
| } |
| |
| static void |
| bttv_crop_reset(struct bttv_crop *c, unsigned int norm) |
| { |
| c->rect = bttv_tvnorms[norm].cropcap.defrect; |
| bttv_crop_calc_limits(c); |
| } |
| |
| /* Call with btv->lock down. */ |
| static int |
| set_tvnorm(struct bttv *btv, unsigned int norm) |
| { |
| const struct bttv_tvnorm *tvnorm; |
| v4l2_std_id id; |
| |
| BUG_ON(norm >= BTTV_TVNORMS); |
| BUG_ON(btv->tvnorm >= BTTV_TVNORMS); |
| |
| tvnorm = &bttv_tvnorms[norm]; |
| |
| if (memcmp(&bttv_tvnorms[btv->tvnorm].cropcap, &tvnorm->cropcap, |
| sizeof (tvnorm->cropcap))) { |
| bttv_crop_reset(&btv->crop[0], norm); |
| btv->crop[1] = btv->crop[0]; /* current = default */ |
| |
| if (0 == (btv->resources & VIDEO_RESOURCES)) { |
| btv->crop_start = tvnorm->cropcap.bounds.top |
| + tvnorm->cropcap.bounds.height; |
| } |
| } |
| |
| btv->tvnorm = norm; |
| |
| btwrite(tvnorm->adelay, BT848_ADELAY); |
| btwrite(tvnorm->bdelay, BT848_BDELAY); |
| btaor(tvnorm->iform,~(BT848_IFORM_NORM|BT848_IFORM_XTBOTH), |
| BT848_IFORM); |
| btwrite(tvnorm->vbipack, BT848_VBI_PACK_SIZE); |
| btwrite(1, BT848_VBI_PACK_DEL); |
| bt848A_set_timing(btv); |
| |
| switch (btv->c.type) { |
| case BTTV_BOARD_VOODOOTV_FM: |
| case BTTV_BOARD_VOODOOTV_200: |
| bttv_tda9880_setnorm(btv, gpio_read()); |
| break; |
| } |
| id = tvnorm->v4l2_id; |
| bttv_call_all(btv, core, s_std, id); |
| |
| return 0; |
| } |
| |
| /* Call with btv->lock down. */ |
| static void |
| set_input(struct bttv *btv, unsigned int input, unsigned int norm) |
| { |
| unsigned long flags; |
| |
| btv->input = input; |
| if (irq_iswitch) { |
| spin_lock_irqsave(&btv->s_lock,flags); |
| if (btv->curr.frame_irq) { |
| /* active capture -> delayed input switch */ |
| btv->new_input = input; |
| } else { |
| video_mux(btv,input); |
| } |
| spin_unlock_irqrestore(&btv->s_lock,flags); |
| } else { |
| video_mux(btv,input); |
| } |
| audio_input(btv, (btv->tuner_type != TUNER_ABSENT && input == 0) ? |
| TVAUDIO_INPUT_TUNER : TVAUDIO_INPUT_EXTERN); |
| set_tvnorm(btv, norm); |
| } |
| |
| static void init_irqreg(struct bttv *btv) |
| { |
| /* clear status */ |
| btwrite(0xfffffUL, BT848_INT_STAT); |
| |
| if (bttv_tvcards[btv->c.type].no_video) { |
| /* i2c only */ |
| btwrite(BT848_INT_I2CDONE, |
| BT848_INT_MASK); |
| } else { |
| /* full video */ |
| btwrite((btv->triton1) | |
| (btv->gpioirq ? BT848_INT_GPINT : 0) | |
| BT848_INT_SCERR | |
| (fdsr ? BT848_INT_FDSR : 0) | |
| BT848_INT_RISCI | BT848_INT_OCERR | |
| BT848_INT_FMTCHG|BT848_INT_HLOCK| |
| BT848_INT_I2CDONE, |
| BT848_INT_MASK); |
| } |
| } |
| |
| static void init_bt848(struct bttv *btv) |
| { |
| int val; |
| |
| if (bttv_tvcards[btv->c.type].no_video) { |
| /* very basic init only */ |
| init_irqreg(btv); |
| return; |
| } |
| |
| btwrite(0x00, BT848_CAP_CTL); |
| btwrite(BT848_COLOR_CTL_GAMMA, BT848_COLOR_CTL); |
| btwrite(BT848_IFORM_XTAUTO | BT848_IFORM_AUTO, BT848_IFORM); |
| |
| /* set planar and packed mode trigger points and */ |
| /* set rising edge of inverted GPINTR pin as irq trigger */ |
| btwrite(BT848_GPIO_DMA_CTL_PKTP_32| |
| BT848_GPIO_DMA_CTL_PLTP1_16| |
| BT848_GPIO_DMA_CTL_PLTP23_16| |
| BT848_GPIO_DMA_CTL_GPINTC| |
| BT848_GPIO_DMA_CTL_GPINTI, |
| BT848_GPIO_DMA_CTL); |
| |
| val = btv->opt_chroma_agc ? BT848_SCLOOP_CAGC : 0; |
| btwrite(val, BT848_E_SCLOOP); |
| btwrite(val, BT848_O_SCLOOP); |
| |
| btwrite(0x20, BT848_E_VSCALE_HI); |
| btwrite(0x20, BT848_O_VSCALE_HI); |
| btwrite(BT848_ADC_RESERVED | (btv->opt_adc_crush ? BT848_ADC_CRUSH : 0), |
| BT848_ADC); |
| |
| btwrite(whitecrush_upper, BT848_WC_UP); |
| btwrite(whitecrush_lower, BT848_WC_DOWN); |
| |
| if (btv->opt_lumafilter) { |
| btwrite(0, BT848_E_CONTROL); |
| btwrite(0, BT848_O_CONTROL); |
| } else { |
| btwrite(BT848_CONTROL_LDEC, BT848_E_CONTROL); |
| btwrite(BT848_CONTROL_LDEC, BT848_O_CONTROL); |
| } |
| |
| bt848_bright(btv, btv->bright); |
| bt848_hue(btv, btv->hue); |
| bt848_contrast(btv, btv->contrast); |
| bt848_sat(btv, btv->saturation); |
| |
| /* interrupt */ |
| init_irqreg(btv); |
| } |
| |
| static void bttv_reinit_bt848(struct bttv *btv) |
| { |
| unsigned long flags; |
| |
| if (bttv_verbose) |
| pr_info("%d: reset, reinitialize\n", btv->c.nr); |
| spin_lock_irqsave(&btv->s_lock,flags); |
| btv->errors=0; |
| bttv_set_dma(btv,0); |
| spin_unlock_irqrestore(&btv->s_lock,flags); |
| |
| init_bt848(btv); |
| btv->pll.pll_current = -1; |
| set_input(btv, btv->input, btv->tvnorm); |
| } |
| |
| static int bttv_g_ctrl(struct file *file, void *priv, |
| struct v4l2_control *c) |
| { |
| struct bttv_fh *fh = priv; |
| struct bttv *btv = fh->btv; |
| |
| switch (c->id) { |
| case V4L2_CID_BRIGHTNESS: |
| c->value = btv->bright; |
| break; |
| case V4L2_CID_HUE: |
| c->value = btv->hue; |
| break; |
| case V4L2_CID_CONTRAST: |
| c->value = btv->contrast; |
| break; |
| case V4L2_CID_SATURATION: |
| c->value = btv->saturation; |
| break; |
| |
| case V4L2_CID_AUDIO_MUTE: |
| case V4L2_CID_AUDIO_VOLUME: |
| case V4L2_CID_AUDIO_BALANCE: |
| case V4L2_CID_AUDIO_BASS: |
| case V4L2_CID_AUDIO_TREBLE: |
| bttv_call_all(btv, core, g_ctrl, c); |
| break; |
| |
| case V4L2_CID_PRIVATE_CHROMA_AGC: |
| c->value = btv->opt_chroma_agc; |
| break; |
| case V4L2_CID_PRIVATE_COMBFILTER: |
| c->value = btv->opt_combfilter; |
| break; |
| case V4L2_CID_PRIVATE_LUMAFILTER: |
| c->value = btv->opt_lumafilter; |
| break; |
| case V4L2_CID_PRIVATE_AUTOMUTE: |
| c->value = btv->opt_automute; |
| break; |
| case V4L2_CID_PRIVATE_AGC_CRUSH: |
| c->value = btv->opt_adc_crush; |
| break; |
| case V4L2_CID_PRIVATE_VCR_HACK: |
| c->value = btv->opt_vcr_hack; |
| break; |
| case V4L2_CID_PRIVATE_WHITECRUSH_UPPER: |
| c->value = btv->opt_whitecrush_upper; |
| break; |
| case V4L2_CID_PRIVATE_WHITECRUSH_LOWER: |
| c->value = btv->opt_whitecrush_lower; |
| break; |
| case V4L2_CID_PRIVATE_UV_RATIO: |
| c->value = btv->opt_uv_ratio; |
| break; |
| case V4L2_CID_PRIVATE_FULL_LUMA_RANGE: |
| c->value = btv->opt_full_luma_range; |
| break; |
| case V4L2_CID_PRIVATE_CORING: |
| c->value = btv->opt_coring; |
| break; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static int bttv_s_ctrl(struct file *file, void *f, |
| struct v4l2_control *c) |
| { |
| int err; |
| int val; |
| struct bttv_fh *fh = f; |
| struct bttv *btv = fh->btv; |
| |
| err = v4l2_prio_check(&btv->prio, fh->prio); |
| if (0 != err) |
| return err; |
| |
| switch (c->id) { |
| case V4L2_CID_BRIGHTNESS: |
| bt848_bright(btv, c->value); |
| break; |
| case V4L2_CID_HUE: |
| bt848_hue(btv, c->value); |
| break; |
| case V4L2_CID_CONTRAST: |
| bt848_contrast(btv, c->value); |
| break; |
| case V4L2_CID_SATURATION: |
| bt848_sat(btv, c->value); |
| break; |
| case V4L2_CID_AUDIO_MUTE: |
| audio_mute(btv, c->value); |
| /* fall through */ |
| case V4L2_CID_AUDIO_VOLUME: |
| if (btv->volume_gpio) |
| btv->volume_gpio(btv, c->value); |
| |
| bttv_call_all(btv, core, s_ctrl, c); |
| break; |
| case V4L2_CID_AUDIO_BALANCE: |
| case V4L2_CID_AUDIO_BASS: |
| case V4L2_CID_AUDIO_TREBLE: |
| bttv_call_all(btv, core, s_ctrl, c); |
| break; |
| |
| case V4L2_CID_PRIVATE_CHROMA_AGC: |
| btv->opt_chroma_agc = c->value; |
| val = btv->opt_chroma_agc ? BT848_SCLOOP_CAGC : 0; |
| btwrite(val, BT848_E_SCLOOP); |
| btwrite(val, BT848_O_SCLOOP); |
| break; |
| case V4L2_CID_PRIVATE_COMBFILTER: |
| btv->opt_combfilter = c->value; |
| break; |
| case V4L2_CID_PRIVATE_LUMAFILTER: |
| btv->opt_lumafilter = c->value; |
| if (btv->opt_lumafilter) { |
| btand(~BT848_CONTROL_LDEC, BT848_E_CONTROL); |
| btand(~BT848_CONTROL_LDEC, BT848_O_CONTROL); |
| } else { |
| btor(BT848_CONTROL_LDEC, BT848_E_CONTROL); |
| btor(BT848_CONTROL_LDEC, BT848_O_CONTROL); |
| } |
| break; |
| case V4L2_CID_PRIVATE_AUTOMUTE: |
| btv->opt_automute = c->value; |
| break; |
| case V4L2_CID_PRIVATE_AGC_CRUSH: |
| btv->opt_adc_crush = c->value; |
| btwrite(BT848_ADC_RESERVED | |
| (btv->opt_adc_crush ? BT848_ADC_CRUSH : 0), |
| BT848_ADC); |
| break; |
| case V4L2_CID_PRIVATE_VCR_HACK: |
| btv->opt_vcr_hack = c->value; |
| break; |
| case V4L2_CID_PRIVATE_WHITECRUSH_UPPER: |
| btv->opt_whitecrush_upper = c->value; |
| btwrite(c->value, BT848_WC_UP); |
| break; |
| case V4L2_CID_PRIVATE_WHITECRUSH_LOWER: |
| btv->opt_whitecrush_lower = c->value; |
| btwrite(c->value, BT848_WC_DOWN); |
| break; |
| case V4L2_CID_PRIVATE_UV_RATIO: |
| btv->opt_uv_ratio = c->value; |
| bt848_sat(btv, btv->saturation); |
| break; |
| case V4L2_CID_PRIVATE_FULL_LUMA_RANGE: |
| btv->opt_full_luma_range = c->value; |
| btaor((c->value<<7), ~BT848_OFORM_RANGE, BT848_OFORM); |
| break; |
| case V4L2_CID_PRIVATE_CORING: |
| btv->opt_coring = c->value; |
| btaor((c->value<<5), ~BT848_OFORM_CORE32, BT848_OFORM); |
| break; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| void bttv_gpio_tracking(struct bttv *btv, char *comment) |
| { |
| unsigned int outbits, data; |
| outbits = btread(BT848_GPIO_OUT_EN); |
| data = btread(BT848_GPIO_DATA); |
| pr_debug("%d: gpio: en=%08x, out=%08x in=%08x [%s]\n", |
| btv->c.nr, outbits, data & outbits, data & ~outbits, comment); |
| } |
| |
| static void bttv_field_count(struct bttv *btv) |
| { |
| int need_count = 0; |
| |
| if (btv->users) |
| need_count++; |
| |
| if (need_count) { |
| /* start field counter */ |
| btor(BT848_INT_VSYNC,BT848_INT_MASK); |
| } else { |
| /* stop field counter */ |
| btand(~BT848_INT_VSYNC,BT848_INT_MASK); |
| btv->field_count = 0; |
| } |
| } |
| |
| static const struct bttv_format* |
| format_by_fourcc(int fourcc) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < FORMATS; i++) { |
| if (-1 == formats[i].fourcc) |
| continue; |
| if (formats[i].fourcc == fourcc) |
| return formats+i; |
| } |
| return NULL; |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| /* misc helpers */ |
| |
| static int |
| bttv_switch_overlay(struct bttv *btv, struct bttv_fh *fh, |
| struct bttv_buffer *new) |
| { |
| struct bttv_buffer *old; |
| unsigned long flags; |
| int retval = 0; |
| |
| dprintk("switch_overlay: enter [new=%p]\n", new); |
| if (new) |
| new->vb.state = VIDEOBUF_DONE; |
| spin_lock_irqsave(&btv->s_lock,flags); |
| old = btv->screen; |
| btv->screen = new; |
| btv->loop_irq |= 1; |
| bttv_set_dma(btv, 0x03); |
| spin_unlock_irqrestore(&btv->s_lock,flags); |
| if (NULL != old) { |
| dprintk("switch_overlay: old=%p state is %d\n", |
| old, old->vb.state); |
| bttv_dma_free(&fh->cap,btv, old); |
| kfree(old); |
| } |
| if (NULL == new) |
| free_btres_lock(btv,fh,RESOURCE_OVERLAY); |
| dprintk("switch_overlay: done\n"); |
| return retval; |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| /* video4linux (1) interface */ |
| |
| static int bttv_prepare_buffer(struct videobuf_queue *q,struct bttv *btv, |
| struct bttv_buffer *buf, |
| const struct bttv_format *fmt, |
| unsigned int width, unsigned int height, |
| enum v4l2_field field) |
| { |
| struct bttv_fh *fh = q->priv_data; |
| int redo_dma_risc = 0; |
| struct bttv_crop c; |
| int norm; |
| int rc; |
| |
| /* check settings */ |
| if (NULL == fmt) |
| return -EINVAL; |
| if (fmt->btformat == BT848_COLOR_FMT_RAW) { |
| width = RAW_BPL; |
| height = RAW_LINES*2; |
| if (width*height > buf->vb.bsize) |
| return -EINVAL; |
| buf->vb.size = buf->vb.bsize; |
| |
| /* Make sure tvnorm and vbi_end remain consistent |
| until we're done. */ |
| |
| norm = btv->tvnorm; |
| |
| /* In this mode capturing always starts at defrect.top |
| (default VDELAY), ignoring cropping parameters. */ |
| if (btv->vbi_end > bttv_tvnorms[norm].cropcap.defrect.top) { |
| return -EINVAL; |
| } |
| |
| c.rect = bttv_tvnorms[norm].cropcap.defrect; |
| } else { |
| norm = btv->tvnorm; |
| c = btv->crop[!!fh->do_crop]; |
| |
| if (width < c.min_scaled_width || |
| width > c.max_scaled_width || |
| height < c.min_scaled_height) |
| return -EINVAL; |
| |
| switch (field) { |
| case V4L2_FIELD_TOP: |
| case V4L2_FIELD_BOTTOM: |
| case V4L2_FIELD_ALTERNATE: |
| /* btv->crop counts frame lines. Max. scale |
| factor is 16:1 for frames, 8:1 for fields. */ |
| if (height * 2 > c.max_scaled_height) |
| return -EINVAL; |
| break; |
| |
| default: |
| if (height > c.max_scaled_height) |
| return -EINVAL; |
| break; |
| } |
| |
| buf->vb.size = (width * height * fmt->depth) >> 3; |
| if (0 != buf->vb.baddr && buf->vb.bsize < buf->vb.size) |
| return -EINVAL; |
| } |
| |
| /* alloc + fill struct bttv_buffer (if changed) */ |
| if (buf->vb.width != width || buf->vb.height != height || |
| buf->vb.field != field || |
| buf->tvnorm != norm || buf->fmt != fmt || |
| buf->crop.top != c.rect.top || |
| buf->crop.left != c.rect.left || |
| buf->crop.width != c.rect.width || |
| buf->crop.height != c.rect.height) { |
| buf->vb.width = width; |
| buf->vb.height = height; |
| buf->vb.field = field; |
| buf->tvnorm = norm; |
| buf->fmt = fmt; |
| buf->crop = c.rect; |
| redo_dma_risc = 1; |
| } |
| |
| /* alloc risc memory */ |
| if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { |
| redo_dma_risc = 1; |
| if (0 != (rc = videobuf_iolock(q,&buf->vb,&btv->fbuf))) |
| goto fail; |
| } |
| |
| if (redo_dma_risc) |
| if (0 != (rc = bttv_buffer_risc(btv,buf))) |
| goto fail; |
| |
| buf->vb.state = VIDEOBUF_PREPARED; |
| return 0; |
| |
| fail: |
| bttv_dma_free(q,btv,buf); |
| return rc; |
| } |
| |
| static int |
| buffer_setup(struct videobuf_queue *q, unsigned int *count, unsigned int *size) |
| { |
| struct bttv_fh *fh = q->priv_data; |
| |
| *size = fh->fmt->depth*fh->width*fh->height >> 3; |
| if (0 == *count) |
| *count = gbuffers; |
| if (*size * *count > gbuffers * gbufsize) |
| *count = (gbuffers * gbufsize) / *size; |
| return 0; |
| } |
| |
| static int |
| buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb, |
| enum v4l2_field field) |
| { |
| struct bttv_buffer *buf = container_of(vb,struct bttv_buffer,vb); |
| struct bttv_fh *fh = q->priv_data; |
| |
| return bttv_prepare_buffer(q,fh->btv, buf, fh->fmt, |
| fh->width, fh->height, field); |
| } |
| |
| static void |
| buffer_queue(struct videobuf_queue *q, struct videobuf_buffer *vb) |
| { |
| struct bttv_buffer *buf = container_of(vb,struct bttv_buffer,vb); |
| struct bttv_fh *fh = q->priv_data; |
| struct bttv *btv = fh->btv; |
| |
| buf->vb.state = VIDEOBUF_QUEUED; |
| list_add_tail(&buf->vb.queue,&btv->capture); |
| if (!btv->curr.frame_irq) { |
| btv->loop_irq |= 1; |
| bttv_set_dma(btv, 0x03); |
| } |
| } |
| |
| static void buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb) |
| { |
| struct bttv_buffer *buf = container_of(vb,struct bttv_buffer,vb); |
| struct bttv_fh *fh = q->priv_data; |
| |
| bttv_dma_free(q,fh->btv,buf); |
| } |
| |
| static struct videobuf_queue_ops bttv_video_qops = { |
| .buf_setup = buffer_setup, |
| .buf_prepare = buffer_prepare, |
| .buf_queue = buffer_queue, |
| .buf_release = buffer_release, |
| }; |
| |
| static int bttv_s_std(struct file *file, void *priv, v4l2_std_id *id) |
| { |
| struct bttv_fh *fh = priv; |
| struct bttv *btv = fh->btv; |
| unsigned int i; |
| int err; |
| |
| err = v4l2_prio_check(&btv->prio, fh->prio); |
| if (err) |
| goto err; |
| |
| for (i = 0; i < BTTV_TVNORMS; i++) |
| if (*id & bttv_tvnorms[i].v4l2_id) |
| break; |
| if (i == BTTV_TVNORMS) { |
| err = -EINVAL; |
| goto err; |
| } |
| |
| set_tvnorm(btv, i); |
| |
| err: |
| |
| return err; |
| } |
| |
| static int bttv_querystd(struct file *file, void *f, v4l2_std_id *id) |
| { |
| struct bttv_fh *fh = f; |
| struct bttv *btv = fh->btv; |
| |
| if (btread(BT848_DSTATUS) & BT848_DSTATUS_NUML) |
| *id = V4L2_STD_625_50; |
| else |
| *id = V4L2_STD_525_60; |
| return 0; |
| } |
| |
| static int bttv_enum_input(struct file *file, void *priv, |
| struct v4l2_input *i) |
| { |
| struct bttv_fh *fh = priv; |
| struct bttv *btv = fh->btv; |
| int rc = 0; |
| |
| if (i->index >= bttv_tvcards[btv->c.type].video_inputs) { |
| rc = -EINVAL; |
| goto err; |
| } |
| |
| i->type = V4L2_INPUT_TYPE_CAMERA; |
| i->audioset = 1; |
| |
| if (btv->tuner_type != TUNER_ABSENT && i->index == 0) { |
| sprintf(i->name, "Television"); |
| i->type = V4L2_INPUT_TYPE_TUNER; |
| i->tuner = 0; |
| } else if (i->index == btv->svhs) { |
| sprintf(i->name, "S-Video"); |
| } else { |
| sprintf(i->name, "Composite%d", i->index); |
| } |
| |
| if (i->index == btv->input) { |
| __u32 dstatus = btread(BT848_DSTATUS); |
| if (0 == (dstatus & BT848_DSTATUS_PRES)) |
| i->status |= V4L2_IN_ST_NO_SIGNAL; |
| if (0 == (dstatus & BT848_DSTATUS_HLOC)) |
| i->status |= V4L2_IN_ST_NO_H_LOCK; |
| } |
| |
| i->std = BTTV_NORMS; |
| |
| err: |
| |
| return rc; |
| } |
| |
| static int bttv_g_input(struct file *file, void *priv, unsigned int *i) |
| { |
| struct bttv_fh *fh = priv; |
| struct bttv *btv = fh->btv; |
| |
| *i = btv->input; |
| |
| return 0; |
| } |
| |
| static int bttv_s_input(struct file *file, void *priv, unsigned int i) |
| { |
| struct bttv_fh *fh = priv; |
| struct bttv *btv = fh->btv; |
| |
| int err; |
| |
| err = v4l2_prio_check(&btv->prio, fh->prio); |
| if (unlikely(err)) |
| goto err; |
| |
| if (i > bttv_tvcards[btv->c.type].video_inputs) { |
| err = -EINVAL; |
| goto err; |
| } |
| |
| set_input(btv, i, btv->tvnorm); |
| |
| err: |
| return 0; |
| } |
| |
| static int bttv_s_tuner(struct file *file, void *priv, |
| struct v4l2_tuner *t) |
| { |
| struct bttv_fh *fh = priv; |
| struct bttv *btv = fh->btv; |
| int err; |
| |
| if (unlikely(0 != t->index)) |
| return -EINVAL; |
| |
| if (unlikely(btv->tuner_type == TUNER_ABSENT)) { |
| err = -EINVAL; |
| goto err; |
| } |
| |
| err = v4l2_prio_check(&btv->prio, fh->prio); |
| if (unlikely(err)) |
| goto err; |
| |
| bttv_call_all(btv, tuner, s_tuner, t); |
| |
| if (btv->audio_mode_gpio) |
| btv->audio_mode_gpio(btv, t, 1); |
| |
| err: |
| |
| return 0; |
| } |
| |
| static int bttv_g_frequency(struct file *file, void *priv, |
| struct v4l2_frequency *f) |
| { |
| struct bttv_fh *fh = priv; |
| struct bttv *btv = fh->btv; |
| |
| f->type = btv->radio_user ? V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV; |
| f->frequency = btv->freq; |
| |
| return 0; |
| } |
| |
| static int bttv_s_frequency(struct file *file, void *priv, |
| struct v4l2_frequency *f) |
| { |
| struct bttv_fh *fh = priv; |
| struct bttv *btv = fh->btv; |
| int err; |
| |
| if (unlikely(f->tuner != 0)) |
| return -EINVAL; |
| |
| err = v4l2_prio_check(&btv->prio, fh->prio); |
| if (unlikely(err)) |
| goto err; |
| |
| if (unlikely(f->type != (btv->radio_user |
| ? V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV))) { |
| err = -EINVAL; |
| goto err; |
| } |
| btv->freq = f->frequency; |
| bttv_call_all(btv, tuner, s_frequency, f); |
| if (btv->has_matchbox && btv->radio_user) |
| tea5757_set_freq(btv, btv->freq); |
| err: |
| |
| return 0; |
| } |
| |
| static int bttv_log_status(struct file *file, void *f) |
| { |
| struct bttv_fh *fh = f; |
| struct bttv *btv = fh->btv; |
| |
| pr_info("%d: ======== START STATUS CARD #%d ========\n", |
| btv->c.nr, btv->c.nr); |
| bttv_call_all(btv, core, log_status); |
| pr_info("%d: ======== END STATUS CARD #%d ========\n", |
| btv->c.nr, btv->c.nr); |
| return 0; |
| } |
| |
| #ifdef CONFIG_VIDEO_ADV_DEBUG |
| static int bttv_g_register(struct file *file, void *f, |
| struct v4l2_dbg_register *reg) |
| { |
| struct bttv_fh *fh = f; |
| struct bttv *btv = fh->btv; |
| |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EPERM; |
| |
| if (!v4l2_chip_match_host(®->match)) |
| return -EINVAL; |
| |
| /* bt848 has a 12-bit register space */ |
| reg->reg &= 0xfff; |
| reg->val = btread(reg->reg); |
| reg->size = 1; |
| |
| return 0; |
| } |
| |
| static int bttv_s_register(struct file *file, void *f, |
| struct v4l2_dbg_register *reg) |
| { |
| struct bttv_fh *fh = f; |
| struct bttv *btv = fh->btv; |
| |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EPERM; |
| |
| if (!v4l2_chip_match_host(®->match)) |
| return -EINVAL; |
| |
| /* bt848 has a 12-bit register space */ |
| reg->reg &= 0xfff; |
| btwrite(reg->val, reg->reg); |
| |
| return 0; |
| } |
| #endif |
| |
| /* Given cropping boundaries b and the scaled width and height of a |
| single field or frame, which must not exceed hardware limits, this |
| function adjusts the cropping parameters c. */ |
| static void |
| bttv_crop_adjust (struct bttv_crop * c, |
| const struct v4l2_rect * b, |
| __s32 width, |
| __s32 height, |
| enum v4l2_field field) |
| { |
| __s32 frame_height = height << !V4L2_FIELD_HAS_BOTH(field); |
| __s32 max_left; |
| __s32 max_top; |
| |
| if (width < c->min_scaled_width) { |
| /* Max. hor. scale factor 16:1. */ |
| c->rect.width = width * 16; |
| } else if (width > c->max_scaled_width) { |
| /* Min. hor. scale factor 1:1. */ |
| c->rect.width = width; |
| |
| max_left = b->left + b->width - width; |
| max_left = min(max_left, (__s32) MAX_HDELAY); |
| if (c->rect.left > max_left) |
| c->rect.left = max_left; |
| } |
| |
| if (height < c->min_scaled_height) { |
| /* Max. vert. scale factor 16:1, single fields 8:1. */ |
| c->rect.height = height * 16; |
| } else if (frame_height > c->max_scaled_height) { |
| /* Min. vert. scale factor 1:1. |
| Top and height count field lines times two. */ |
| c->rect.height = (frame_height + 1) & ~1; |
| |
| max_top = b->top + b->height - c->rect.height; |
| if (c->rect.top > max_top) |
| c->rect.top = max_top; |
| } |
| |
| bttv_crop_calc_limits(c); |
| } |
| |
| /* Returns an error if scaling to a frame or single field with the given |
| width and height is not possible with the current cropping parameters |
| and width aligned according to width_mask. If adjust_size is TRUE the |
| function may adjust the width and/or height instead, rounding width |
| to (width + width_bias) & width_mask. If adjust_crop is TRUE it may |
| also adjust the current cropping parameters to get closer to the |
| desired image size. */ |
| static int |
| limit_scaled_size_lock (struct bttv_fh * fh, |
| __s32 * width, |
| __s32 * height, |
| enum v4l2_field field, |
| unsigned int width_mask, |
| unsigned int width_bias, |
| int adjust_size, |
| int adjust_crop) |
| { |
| struct bttv *btv = fh->btv; |
| const struct v4l2_rect *b; |
| struct bttv_crop *c; |
| __s32 min_width; |
| __s32 min_height; |
| __s32 max_width; |
| __s32 max_height; |
| int rc; |
| |
| BUG_ON((int) width_mask >= 0 || |
| width_bias >= (unsigned int) -width_mask); |
| |
| /* Make sure tvnorm, vbi_end and the current cropping parameters |
| remain consistent until we're done. */ |
| |
| b = &bttv_tvnorms[btv->tvnorm].cropcap.bounds; |
| |
| /* Do crop - use current, don't - use default parameters. */ |
| c = &btv->crop[!!fh->do_crop]; |
| |
| if (fh->do_crop |
| && adjust_size |
| && adjust_crop |
| && !locked_btres(btv, VIDEO_RESOURCES)) { |
| min_width = 48; |
| min_height = 32; |
| |
| /* We cannot scale up. When the scaled image is larger |
| than crop.rect we adjust the crop.rect as required |
| by the V4L2 spec, hence cropcap.bounds are our limit. */ |
| max_width = min(b->width, (__s32) MAX_HACTIVE); |
| max_height = b->height; |
| |
| /* We cannot capture the same line as video and VBI data. |
| Note btv->vbi_end is really a minimum, see |
| bttv_vbi_try_fmt(). */ |
| if (btv->vbi_end > b->top) { |
| max_height -= btv->vbi_end - b->top; |
| rc = -EBUSY; |
| if (min_height > max_height) |
| goto fail; |
| } |
| } else { |
| rc = -EBUSY; |
| if (btv->vbi_end > c->rect.top) |
| goto fail; |
| |
| min_width = c->min_scaled_width; |
| min_height = c->min_scaled_height; |
| max_width = c->max_scaled_width; |
| max_height = c->max_scaled_height; |
| |
| adjust_crop = 0; |
| } |
| |
| min_width = (min_width - width_mask - 1) & width_mask; |
| max_width = max_width & width_mask; |
| |
| /* Max. scale factor is 16:1 for frames, 8:1 for fields. */ |
| min_height = min_height; |
| /* Min. scale factor is 1:1. */ |
| max_height >>= !V4L2_FIELD_HAS_BOTH(field); |
| |
| if (adjust_size) { |
| *width = clamp(*width, min_width, max_width); |
| *height = clamp(*height, min_height, max_height); |
| |
| /* Round after clamping to avoid overflow. */ |
| *width = (*width + width_bias) & width_mask; |
| |
| if (adjust_crop) { |
| bttv_crop_adjust(c, b, *width, *height, field); |
| |
| if (btv->vbi_end > c->rect.top) { |
| /* Move the crop window out of the way. */ |
| c->rect.top = btv->vbi_end; |
| } |
| } |
| } else { |
| rc = -EINVAL; |
| if (*width < min_width || |
| *height < min_height || |
| *width > max_width || |
| *height > max_height || |
| 0 != (*width & ~width_mask)) |
| goto fail; |
| } |
| |
| rc = 0; /* success */ |
| |
| fail: |
| |
| return rc; |
| } |
| |
| /* Returns an error if the given overlay window dimensions are not |
| possible with the current cropping parameters. If adjust_size is |
| TRUE the function may adjust the window width and/or height |
| instead, however it always rounds the horizontal position and |
| width as btcx_align() does. If adjust_crop is TRUE the function |
| may also adjust the current cropping parameters to get closer |
| to the desired window size. */ |
| static int |
| verify_window_lock (struct bttv_fh * fh, |
| struct v4l2_window * win, |
| int adjust_size, |
| int adjust_crop) |
| { |
| enum v4l2_field field; |
| unsigned int width_mask; |
| int rc; |
| |
| if (win->w.width < 48 || win->w.height < 32) |
| return -EINVAL; |
| if (win->clipcount > 2048) |
| return -EINVAL; |
| |
| field = win->field; |
| |
| if (V4L2_FIELD_ANY == field) { |
| __s32 height2; |
| |
| height2 = fh->btv->crop[!!fh->do_crop].rect.height >> 1; |
| field = (win->w.height > height2) |
| ? V4L2_FIELD_INTERLACED |
| : V4L2_FIELD_TOP; |
| } |
| switch (field) { |
| case V4L2_FIELD_TOP: |
| case V4L2_FIELD_BOTTOM: |
| case V4L2_FIELD_INTERLACED: |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* 4-byte alignment. */ |
| if (NULL == fh->ovfmt) |
| return -EINVAL; |
| width_mask = ~0; |
| switch (fh->ovfmt->depth) { |
| case 8: |
| case 24: |
| width_mask = ~3; |
| break; |
| case 16: |
| width_mask = ~1; |
| break; |
| case 32: |
| break; |
| default: |
| BUG(); |
| } |
| |
| win->w.width -= win->w.left & ~width_mask; |
| win->w.left = (win->w.left - width_mask - 1) & width_mask; |
| |
| rc = limit_scaled_size_lock(fh, &win->w.width, &win->w.height, |
| field, width_mask, |
| /* width_bias: round down */ 0, |
| adjust_size, adjust_crop); |
| if (0 != rc) |
| return rc; |
| |
| win->field = field; |
| return 0; |
| } |
| |
| static int setup_window_lock(struct bttv_fh *fh, struct bttv *btv, |
| struct v4l2_window *win, int fixup) |
| { |
| struct v4l2_clip *clips = NULL; |
| int n,size,retval = 0; |
| |
| if (NULL == fh->ovfmt) |
| return -EINVAL; |
| if (!(fh->ovfmt->flags & FORMAT_FLAGS_PACKED)) |
| return -EINVAL; |
| retval = verify_window_lock(fh, win, |
| /* adjust_size */ fixup, |
| /* adjust_crop */ fixup); |
| if (0 != retval) |
| return retval; |
| |
| /* copy clips -- luckily v4l1 + v4l2 are binary |
| compatible here ...*/ |
| n = win->clipcount; |
| size = sizeof(*clips)*(n+4); |
| clips = kmalloc(size,GFP_KERNEL); |
| if (NULL == clips) |
| return -ENOMEM; |
| if (n > 0) { |
| if (copy_from_user(clips,win->clips,sizeof(struct v4l2_clip)*n)) { |
| kfree(clips); |
| return -EFAULT; |
| } |
| } |
| |
| /* clip against screen */ |
| if (NULL != btv->fbuf.base) |
| n = btcx_screen_clips(btv->fbuf.fmt.width, btv->fbuf.fmt.height, |
| &win->w, clips, n); |
| btcx_sort_clips(clips,n); |
| |
| /* 4-byte alignments */ |
| switch (fh->ovfmt->depth) { |
| case 8: |
| case 24: |
| btcx_align(&win->w, clips, n, 3); |
| break; |
| case 16: |
| btcx_align(&win->w, clips, n, 1); |
| break; |
| case 32: |
| /* no alignment fixups needed */ |
| break; |
| default: |
| BUG(); |
| } |
| |
| kfree(fh->ov.clips); |
| fh->ov.clips = clips; |
| fh->ov.nclips = n; |
| |
| fh->ov.w = win->w; |
| fh->ov.field = win->field; |
| fh->ov.setup_ok = 1; |
| |
| btv->init.ov.w.width = win->w.width; |
| btv->init.ov.w.height = win->w.height; |
| btv->init.ov.field = win->field; |
| |
| /* update overlay if needed */ |
| retval = 0; |
| if (check_btres(fh, RESOURCE_OVERLAY)) { |
| struct bttv_buffer *new; |
| |
| new = videobuf_sg_alloc(sizeof(*new)); |
| new->crop = btv->crop[!!fh->do_crop].rect; |
| bttv_overlay_risc(btv, &fh->ov, fh->ovfmt, new); |
| retval = bttv_switch_overlay(btv,fh,new); |
| } |
| return retval; |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| static struct videobuf_queue* bttv_queue(struct bttv_fh *fh) |
| { |
| struct videobuf_queue* q = NULL; |
| |
| switch (fh->type) { |
| case V4L2_BUF_TYPE_VIDEO_CAPTURE: |
| q = &fh->cap; |
| break; |
| case V4L2_BUF_TYPE_VBI_CAPTURE: |
| q = &fh->vbi; |
| break; |
| default: |
| BUG(); |
| } |
| return q; |
| } |
| |
| static int bttv_resource(struct bttv_fh *fh) |
| { |
| int res = 0; |
| |
| switch (fh->type) { |
| case V4L2_BUF_TYPE_VIDEO_CAPTURE: |
| res = RESOURCE_VIDEO_STREAM; |
| break; |
| case V4L2_BUF_TYPE_VBI_CAPTURE: |
| res = RESOURCE_VBI; |
| break; |
| default: |
| BUG(); |
| } |
| return res; |
| } |
| |
| static int bttv_switch_type(struct bttv_fh *fh, enum v4l2_buf_type type) |
| { |
| struct videobuf_queue *q = bttv_queue(fh); |
| int res = bttv_resource(fh); |
| |
| if (check_btres(fh,res)) |
| return -EBUSY; |
| if (videobuf_queue_is_busy(q)) |
| return -EBUSY; |
| fh->type = type; |
| return 0; |
| } |
| |
| static void |
| pix_format_set_size (struct v4l2_pix_format * f, |
| const struct bttv_format * fmt, |
| unsigned int width, |
| unsigned int height) |
| { |
| f->width = width; |
| f->height = height; |
| |
| if (fmt->flags & FORMAT_FLAGS_PLANAR) { |
| f->bytesperline = width; /* Y plane */ |
| f->sizeimage = (width * height * fmt->depth) >> 3; |
| } else { |
| f->bytesperline = (width * fmt->depth) >> 3; |
| f->sizeimage = height * f->bytesperline; |
| } |
| } |
| |
| static int bttv_g_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_format *f) |
| { |
| struct bttv_fh *fh = priv; |
| |
| pix_format_set_size(&f->fmt.pix, fh->fmt, |
| fh->width, fh->height); |
| f->fmt.pix.field = fh->cap.field; |
| f->fmt.pix.pixelformat = fh->fmt->fourcc; |
| |
| return 0; |
| } |
| |
| static int bttv_g_fmt_vid_overlay(struct file *file, void *priv, |
| struct v4l2_format *f) |
| { |
| struct bttv_fh *fh = priv; |
| |
| f->fmt.win.w = fh->ov.w; |
| f->fmt.win.field = fh->ov.field; |
| |
| return 0; |
| } |
| |
| static int bttv_try_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_format *f) |
| { |
| const struct bttv_format *fmt; |
| struct bttv_fh *fh = priv; |
| struct bttv *btv = fh->btv; |
| enum v4l2_field field; |
| __s32 width, height; |
| int rc; |
| |
| fmt = format_by_fourcc(f->fmt.pix.pixelformat); |
| if (NULL == fmt) |
| return -EINVAL; |
| |
| field = f->fmt.pix.field; |
| |
| if (V4L2_FIELD_ANY == field) { |
| __s32 height2; |
| |
| height2 = btv->crop[!!fh->do_crop].rect.height >> 1; |
| field = (f->fmt.pix.height > height2) |
| ? V4L2_FIELD_INTERLACED |
| : V4L2_FIELD_BOTTOM; |
| } |
| |
| if (V4L2_FIELD_SEQ_BT == field) |
| field = V4L2_FIELD_SEQ_TB; |
| |
| switch (field) { |
| case V4L2_FIELD_TOP: |
| case V4L2_FIELD_BOTTOM: |
| case V4L2_FIELD_ALTERNATE: |
| case V4L2_FIELD_INTERLACED: |
| break; |
| case V4L2_FIELD_SEQ_TB: |
| if (fmt->flags & FORMAT_FLAGS_PLANAR) |
| return -EINVAL; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| width = f->fmt.pix.width; |
| height = f->fmt.pix.height; |
| |
| rc = limit_scaled_size_lock(fh, &width, &height, field, |
| /* width_mask: 4 pixels */ ~3, |
| /* width_bias: nearest */ 2, |
| /* adjust_size */ 1, |
| /* adjust_crop */ 0); |
| if (0 != rc) |
| return rc; |
| |
| /* update data for the application */ |
| f->fmt.pix.field = field; |
| pix_format_set_size(&f->fmt.pix, fmt, width, height); |
| |
| return 0; |
| } |
| |
| static int bttv_try_fmt_vid_overlay(struct file *file, void *priv, |
| struct v4l2_format *f) |
| { |
| struct bttv_fh *fh = priv; |
| |
| return verify_window_lock(fh, &f->fmt.win, |
| /* adjust_size */ 1, |
| /* adjust_crop */ 0); |
| } |
| |
| static int bttv_s_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_format *f) |
| { |
| int retval; |
| const struct bttv_format *fmt; |
| struct bttv_fh *fh = priv; |
| struct bttv *btv = fh->btv; |
| __s32 width, height; |
| enum v4l2_field field; |
| |
| retval = bttv_switch_type(fh, f->type); |
| if (0 != retval) |
| return retval; |
| |
| retval = bttv_try_fmt_vid_cap(file, priv, f); |
| if (0 != retval) |
| return retval; |
| |
| width = f->fmt.pix.width; |
| height = f->fmt.pix.height; |
| field = f->fmt.pix.field; |
| |
| retval = limit_scaled_size_lock(fh, &width, &height, f->fmt.pix.field, |
| /* width_mask: 4 pixels */ ~3, |
| /* width_bias: nearest */ 2, |
| /* adjust_size */ 1, |
| /* adjust_crop */ 1); |
| if (0 != retval) |
| return retval; |
| |
| f->fmt.pix.field = field; |
| |
| fmt = format_by_fourcc(f->fmt.pix.pixelformat); |
| |
| /* update our state informations */ |
| fh->fmt = fmt; |
| fh->cap.field = f->fmt.pix.field; |
| fh->cap.last = V4L2_FIELD_NONE; |
| fh->width = f->fmt.pix.width; |
| fh->height = f->fmt.pix.height; |
| btv->init.fmt = fmt; |
| btv->init.width = f->fmt.pix.width; |
| btv->init.height = f->fmt.pix.height; |
| |
| return 0; |
| } |
| |
| static int bttv_s_fmt_vid_overlay(struct file *file, void *priv, |
| struct v4l2_format *f) |
| { |
| struct bttv_fh *fh = priv; |
| struct bttv *btv = fh->btv; |
| |
| if (no_overlay > 0) { |
| pr_err("V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n"); |
| return -EINVAL; |
| } |
| |
| return setup_window_lock(fh, btv, &f->fmt.win, 1); |
| } |
| |
| static int bttv_querycap(struct file *file, void *priv, |
| struct v4l2_capability *cap) |
| { |
| struct bttv_fh *fh = priv; |
| struct bttv *btv = fh->btv; |
| |
| if (0 == v4l2) |
| return -EINVAL; |
| |
| strlcpy(cap->driver, "bttv", sizeof(cap->driver)); |
| strlcpy(cap->card, btv->video_dev->name, sizeof(cap->card)); |
| snprintf(cap->bus_info, sizeof(cap->bus_info), |
| "PCI:%s", pci_name(btv->c.pci)); |
| cap->capabilities = |
| V4L2_CAP_VIDEO_CAPTURE | |
| V4L2_CAP_VBI_CAPTURE | |
| V4L2_CAP_READWRITE | |
| V4L2_CAP_STREAMING; |
| if (no_overlay <= 0) |
| cap->capabilities |= V4L2_CAP_VIDEO_OVERLAY; |
| |
| /* |
| * No need to lock here: those vars are initialized during board |
| * probe and remains untouched during the rest of the driver lifecycle |
| */ |
| if (btv->has_saa6588) |
| cap->capabilities |= V4L2_CAP_RDS_CAPTURE; |
| if (btv->tuner_type != TUNER_ABSENT) |
| cap->capabilities |= V4L2_CAP_TUNER; |
| return 0; |
| } |
| |
| static int bttv_enum_fmt_cap_ovr(struct v4l2_fmtdesc *f) |
| { |
| int index = -1, i; |
| |
| for (i = 0; i < FORMATS; i++) { |
| if (formats[i].fourcc != -1) |
| index++; |
| if ((unsigned int)index == f->index) |
| break; |
| } |
| if (FORMATS == i) |
| return -EINVAL; |
| |
| f->pixelformat = formats[i].fourcc; |
| strlcpy(f->description, formats[i].name, sizeof(f->description)); |
| |
| return i; |
| } |
| |
| static int bttv_enum_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_fmtdesc *f) |
| { |
| int rc = bttv_enum_fmt_cap_ovr(f); |
| |
| if (rc < 0) |
| return rc; |
| |
| return 0; |
| } |
| |
| static int bttv_enum_fmt_vid_overlay(struct file *file, void *priv, |
| struct v4l2_fmtdesc *f) |
| { |
| int rc; |
| |
| if (no_overlay > 0) { |
| pr_err("V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n"); |
| return -EINVAL; |
| } |
| |
| rc = bttv_enum_fmt_cap_ovr(f); |
| |
| if (rc < 0) |
| return rc; |
| |
| if (!(formats[rc].flags & FORMAT_FLAGS_PACKED)) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static int bttv_g_fbuf(struct file *file, void *f, |
| struct v4l2_framebuffer *fb) |
| { |
| struct bttv_fh *fh = f; |
| struct bttv *btv = fh->btv; |
| |
| *fb = btv->fbuf; |
| fb->capability = V4L2_FBUF_CAP_LIST_CLIPPING; |
| if (fh->ovfmt) |
| fb->fmt.pixelformat = fh->ovfmt->fourcc; |
| return 0; |
| } |
| |
| static int bttv_overlay(struct file *file, void *f, unsigned int on) |
| { |
| struct bttv_fh *fh = f; |
| struct bttv *btv = fh->btv; |
| struct bttv_buffer *new; |
| int retval = 0; |
| |
| if (on) { |
| /* verify args */ |
| if (unlikely(!btv->fbuf.base)) { |
| return -EINVAL; |
| } |
| if (unlikely(!fh->ov.setup_ok)) { |
| dprintk("%d: overlay: !setup_ok\n", btv->c.nr); |
| retval = -EINVAL; |
| } |
| if (retval) |
| return retval; |
| } |
| |
| if (!check_alloc_btres_lock(btv, fh, RESOURCE_OVERLAY)) |
| return -EBUSY; |
| |
| if (on) { |
| fh->ov.tvnorm = btv->tvnorm; |
| new = videobuf_sg_alloc(sizeof(*new)); |
| new->crop = btv->crop[!!fh->do_crop].rect; |
| bttv_overlay_risc(btv, &fh->ov, fh->ovfmt, new); |
| } else { |
| new = NULL; |
| } |
| |
| /* switch over */ |
| retval = bttv_switch_overlay(btv, fh, new); |
| return retval; |
| } |
| |
| static int bttv_s_fbuf(struct file *file, void *f, |
| struct v4l2_framebuffer *fb) |
| { |
| struct bttv_fh *fh = f; |
| struct bttv *btv = fh->btv; |
| const struct bttv_format *fmt; |
| int retval; |
| |
| if (!capable(CAP_SYS_ADMIN) && |
| !capable(CAP_SYS_RAWIO)) |
| return -EPERM; |
| |
| /* check args */ |
| fmt = format_by_fourcc(fb->fmt.pixelformat); |
| if (NULL == fmt) |
| return -EINVAL; |
| if (0 == (fmt->flags & FORMAT_FLAGS_PACKED)) |
| return -EINVAL; |
| |
| retval = -EINVAL; |
| if (fb->flags & V4L2_FBUF_FLAG_OVERLAY) { |
| __s32 width = fb->fmt.width; |
| __s32 height = fb->fmt.height; |
| |
| retval = limit_scaled_size_lock(fh, &width, &height, |
| V4L2_FIELD_INTERLACED, |
| /* width_mask */ ~3, |
| /* width_bias */ 2, |
| /* adjust_size */ 0, |
| /* adjust_crop */ 0); |
| if (0 != retval) |
| return retval; |
| } |
| |
| /* ok, accept it */ |
| btv->fbuf.base = fb->base; |
| btv->fbuf.fmt.width = fb->fmt.width; |
| btv->fbuf.fmt.height = fb->fmt.height; |
| if (0 != fb->fmt.bytesperline) |
| btv->fbuf.fmt.bytesperline = fb->fmt.bytesperline; |
| else |
| btv->fbuf.fmt.bytesperline = btv->fbuf.fmt.width*fmt->depth/8; |
| |
| retval = 0; |
| fh->ovfmt = fmt; |
| btv->init.ovfmt = fmt; |
| if (fb->flags & V4L2_FBUF_FLAG_OVERLAY) { |
| fh->ov.w.left = 0; |
| fh->ov.w.top = 0; |
| fh->ov.w.width = fb->fmt.width; |
| fh->ov.w.height = fb->fmt.height; |
| btv->init.ov.w.width = fb->fmt.width; |
| btv->init.ov.w.height = fb->fmt.height; |
| kfree(fh->ov.clips); |
| fh->ov.clips = NULL; |
| fh->ov.nclips = 0; |
| |
| if (check_btres(fh, RESOURCE_OVERLAY)) { |
| struct bttv_buffer *new; |
| |
| new = videobuf_sg_alloc(sizeof(*new)); |
| new->crop = btv->crop[!!fh->do_crop].rect; |
| bttv_overlay_risc(btv, &fh->ov, fh->ovfmt, new); |
| retval = bttv_switch_overlay(btv, fh, new); |
| } |
| } |
| return retval; |
| } |
| |
| static int bttv_reqbufs(struct file *file, void *priv, |
| struct v4l2_requestbuffers *p) |
| { |
| struct bttv_fh *fh = priv; |
| return videobuf_reqbufs(bttv_queue(fh), p); |
| } |
| |
| static int bttv_querybuf(struct file *file, void *priv, |
| struct v4l2_buffer *b) |
| { |
| struct bttv_fh *fh = priv; |
| return videobuf_querybuf(bttv_queue(fh), b); |
| } |
| |
| static int bttv_qbuf(struct file *file, void *priv, struct v4l2_buffer *b) |
| { |
| struct bttv_fh *fh = priv; |
| struct bttv *btv = fh->btv; |
| int res = bttv_resource(fh); |
| |
| if (!check_alloc_btres_lock(btv, fh, res)) |
| return -EBUSY; |
| |
| return videobuf_qbuf(bttv_queue(fh), b); |
| } |
| |
| static int bttv_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b) |
| { |
| struct bttv_fh *fh = priv; |
| return videobuf_dqbuf(bttv_queue(fh), b, |
| file->f_flags & O_NONBLOCK); |
| } |
| |
| static int bttv_streamon(struct file *file, void *priv, |
| enum v4l2_buf_type type) |
| { |
| struct bttv_fh *fh = priv; |
| struct bttv *btv = fh->btv; |
| int res = bttv_resource(fh); |
| |
| if (!check_alloc_btres_lock(btv, fh, res)) |
| return -EBUSY; |
| return videobuf_streamon(bttv_queue(fh)); |
| } |
| |
| |
| static int bttv_streamoff(struct file *file, void *priv, |
| enum v4l2_buf_type type) |
| { |
| struct bttv_fh *fh = priv; |
| struct bttv *btv = fh->btv; |
| int retval; |
| int res = bttv_resource(fh); |
| |
| |
| retval = videobuf_streamoff(bttv_queue(fh)); |
| if (retval < 0) |
| return retval; |
| free_btres_lock(btv, fh, res); |
| return 0; |
| } |
| |
| static int bttv_queryctrl(struct file *file, void *priv, |
| struct v4l2_queryctrl *c) |
| { |
| struct bttv_fh *fh = priv; |
| struct bttv *btv = fh->btv; |
| const struct v4l2_queryctrl *ctrl; |
| |
| if ((c->id < V4L2_CID_BASE || |
| c->id >= V4L2_CID_LASTP1) && |
| (c->id < V4L2_CID_PRIVATE_BASE || |
| c->id >= V4L2_CID_PRIVATE_LASTP1)) |
| return -EINVAL; |
| |
| if (!btv->volume_gpio && (c->id == V4L2_CID_AUDIO_VOLUME)) |
| *c = no_ctl; |
| else { |
| ctrl = ctrl_by_id(c->id); |
| |
| *c = (NULL != ctrl) ? *ctrl : no_ctl; |
| } |
| |
| return 0; |
| } |
| |
| static int bttv_g_parm(struct file *file, void *f, |
| struct v4l2_streamparm *parm) |
| { |
| struct bttv_fh *fh = f; |
| struct bttv *btv = fh->btv; |
| |
| v4l2_video_std_frame_period(bttv_tvnorms[btv->tvnorm].v4l2_id, |
| &parm->parm.capture.timeperframe); |
| |
| return 0; |
| } |
| |
| static int bttv_g_tuner(struct file *file, void *priv, |
| struct v4l2_tuner *t) |
| { |
| struct bttv_fh *fh = priv; |
| struct bttv *btv = fh->btv; |
| |
| if (btv->tuner_type == TUNER_ABSENT) |
| return -EINVAL; |
| if (0 != t->index) |
| return -EINVAL; |
| |
| t->rxsubchans = V4L2_TUNER_SUB_MONO; |
| bttv_call_all(btv, tuner, g_tuner, t); |
| strcpy(t->name, "Television"); |
| t->capability = V4L2_TUNER_CAP_NORM; |
| t->type = V4L2_TUNER_ANALOG_TV; |
| if (btread(BT848_DSTATUS)&BT848_DSTATUS_HLOC) |
| t->signal = 0xffff; |
| |
| if (btv->audio_mode_gpio) |
| btv->audio_mode_gpio(btv, t, 0); |
| |
| return 0; |
| } |
| |
| static int bttv_g_priority(struct file *file, void *f, enum v4l2_priority *p) |
| { |
| struct bttv_fh *fh = f; |
| struct bttv *btv = fh->btv; |
| |
| *p = v4l2_prio_max(&btv->prio); |
| |
| return 0; |
| } |
| |
| static int bttv_s_priority(struct file *file, void *f, |
| enum v4l2_priority prio) |
| { |
| struct bttv_fh *fh = f; |
| struct bttv *btv = fh->btv; |
| int rc; |
| |
| rc = v4l2_prio_change(&btv->prio, &fh->prio, prio); |
| |
| return rc; |
| } |
| |
| static int bttv_cropcap(struct file *file, void *priv, |
| struct v4l2_cropcap *cap) |
| { |
| struct bttv_fh *fh = priv; |
| struct bttv *btv = fh->btv; |
| |
| if (cap->type != V4L2_BUF_TYPE_VIDEO_CAPTURE && |
| cap->type != V4L2_BUF_TYPE_VIDEO_OVERLAY) |
| return -EINVAL; |
| |
| *cap = bttv_tvnorms[btv->tvnorm].cropcap; |
| |
| return 0; |
| } |
| |
| static int bttv_g_crop(struct file *file, void *f, struct v4l2_crop *crop) |
| { |
| struct bttv_fh *fh = f; |
| struct bttv *btv = fh->btv; |
| |
| if (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE && |
| crop->type != V4L2_BUF_TYPE_VIDEO_OVERLAY) |
| return -EINVAL; |
| |
| /* No fh->do_crop = 1; because btv->crop[1] may be |
| inconsistent with fh->width or fh->height and apps |
| do not expect a change here. */ |
| |
| crop->c = btv->crop[!!fh->do_crop].rect; |
| |
| return 0; |
| } |
| |
| static int bttv_s_crop(struct file *file, void *f, struct v4l2_crop *crop) |
| { |
| struct bttv_fh *fh = f; |
| struct bttv *btv = fh->btv; |
| const struct v4l2_rect *b; |
| int retval; |
| struct bttv_crop c; |
| __s32 b_left; |
| __s32 b_top; |
| __s32 b_right; |
| __s32 b_bottom; |
| |
| if (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE && |
| crop->type != V4L2_BUF_TYPE_VIDEO_OVERLAY) |
| return -EINVAL; |
| |
| /* Make sure tvnorm, vbi_end and the current cropping |
| parameters remain consistent until we're done. Note |
| read() may change vbi_end in check_alloc_btres_lock(). */ |
| retval = v4l2_prio_check(&btv->prio, fh->prio); |
| if (0 != retval) { |
| return retval; |
| } |
| |
| retval = -EBUSY; |
| |
| if (locked_btres(fh->btv, VIDEO_RESOURCES)) { |
| return retval; |
| } |
| |
| b = &bttv_tvnorms[btv->tvnorm].cropcap.bounds; |
| |
| b_left = b->left; |
| b_right = b_left + b->width; |
| b_bottom = b->top + b->height; |
| |
| b_top = max(b->top, btv->vbi_end); |
| if (b_top + 32 >= b_bottom) { |
| return retval; |
| } |
| |
| /* Min. scaled size 48 x 32. */ |
| c.rect.left = clamp(crop->c.left, b_left, b_right - 48); |
| c.rect.left = min(c.rect.left, (__s32) MAX_HDELAY); |
| |
| c.rect.width = clamp(crop->c.width, |
| 48, b_right - c.rect.left); |
| |
| c.rect.top = clamp(crop->c.top, b_top, b_bottom - 32); |
| /* Top and height must be a multiple of two. */ |
| c.rect.top = (c.rect.top + 1) & ~1; |
| |
| c.rect.height = clamp(crop->c.height, |
| 32, b_bottom - c.rect.top); |
| c.rect.height = (c.rect.height + 1) & ~1; |
| |
| bttv_crop_calc_limits(&c); |
| |
| btv->crop[1] = c; |
| |
| fh->do_crop = 1; |
| |
| if (fh->width < c.min_scaled_width) { |
| fh->width = c.min_scaled_width; |
| btv->init.width = c.min_scaled_width; |
| } else if (fh->width > c.max_scaled_width) { |
| fh->width = c.max_scaled_width; |
| btv->init.width = c.max_scaled_width; |
| } |
| |
| if (fh->height < c.min_scaled_height) { |
| fh->height = c.min_scaled_height; |
| btv->init.height = c.min_scaled_height; |
| } else if (fh->height > c.max_scaled_height) { |
| fh->height = c.max_scaled_height; |
| btv->init.height = c.max_scaled_height; |
| } |
| |
| return 0; |
| } |
| |
| static int bttv_g_audio(struct file *file, void *priv, struct v4l2_audio *a) |
| { |
| if (unlikely(a->index)) |
| return -EINVAL; |
| |
| strcpy(a->name, "audio"); |
| return 0; |
| } |
| |
| static int bttv_s_audio(struct file *file, void *priv, struct v4l2_audio *a) |
| { |
| if (unlikely(a->index)) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static ssize_t bttv_read(struct file *file, char __user *data, |
| size_t count, loff_t *ppos) |
| { |
| struct bttv_fh *fh = file->private_data; |
| int retval = 0; |
| |
| if (fh->btv->errors) |
| bttv_reinit_bt848(fh->btv); |
| dprintk("%d: read count=%d type=%s\n", |
| fh->btv->c.nr, (int)count, v4l2_type_names[fh->type]); |
| |
| switch (fh->type) { |
| case V4L2_BUF_TYPE_VIDEO_CAPTURE: |
| if (!check_alloc_btres_lock(fh->btv, fh, RESOURCE_VIDEO_READ)) { |
| /* VIDEO_READ in use by another fh, |
| or VIDEO_STREAM by any fh. */ |
| return -EBUSY; |
| } |
| retval = videobuf_read_one(&fh->cap, data, count, ppos, |
| file->f_flags & O_NONBLOCK); |
| free_btres_lock(fh->btv, fh, RESOURCE_VIDEO_READ); |
| break; |
| case V4L2_BUF_TYPE_VBI_CAPTURE: |
| if (!check_alloc_btres_lock(fh->btv,fh,RESOURCE_VBI)) |
| return -EBUSY; |
| retval = videobuf_read_stream(&fh->vbi, data, count, ppos, 1, |
| file->f_flags & O_NONBLOCK); |
| break; |
| default: |
| BUG(); |
| } |
| return retval; |
| } |
| |
| static unsigned int bttv_poll(struct file *file, poll_table *wait) |
| { |
| struct bttv_fh *fh = file->private_data; |
| struct bttv_buffer *buf; |
| enum v4l2_field field; |
| unsigned int rc = POLLERR; |
| |
| if (V4L2_BUF_TYPE_VBI_CAPTURE == fh->type) { |
| if (!check_alloc_btres_lock(fh->btv,fh,RESOURCE_VBI)) |
| return POLLERR; |
| return videobuf_poll_stream(file, &fh->vbi, wait); |
| } |
| |
| if (check_btres(fh,RESOURCE_VIDEO_STREAM)) { |
| /* streaming capture */ |
| if (list_empty(&fh->cap.stream)) |
| goto err; |
| buf = list_entry(fh->cap.stream.next,struct bttv_buffer,vb.stream); |
| } else { |
| /* read() capture */ |
| if (NULL == fh->cap.read_buf) { |
| /* need to capture a new frame */ |
| if (locked_btres(fh->btv,RESOURCE_VIDEO_STREAM)) |
| goto err; |
| fh->cap.read_buf = videobuf_sg_alloc(fh->cap.msize); |
| if (NULL == fh->cap.read_buf) |
| goto err; |
| fh->cap.read_buf->memory = V4L2_MEMORY_USERPTR; |
| field = videobuf_next_field(&fh->cap); |
| if (0 != fh->cap.ops->buf_prepare(&fh->cap,fh->cap.read_buf,field)) { |
| kfree (fh->cap.read_buf); |
| fh->cap.read_buf = NULL; |
| goto err; |
| } |
| fh->cap.ops->buf_queue(&fh->cap,fh->cap.read_buf); |
| fh->cap.read_off = 0; |
| } |
| buf = (struct bttv_buffer*)fh->cap.read_buf; |
| } |
| |
| poll_wait(file, &buf->vb.done, wait); |
| if (buf->vb.state == VIDEOBUF_DONE || |
| buf->vb.state == VIDEOBUF_ERROR) |
| rc = POLLIN|POLLRDNORM; |
| else |
| rc = 0; |
| err: |
| return rc; |
| } |
| |
| static int bttv_open(struct file *file) |
| { |
| struct video_device *vdev = video_devdata(file); |
| struct bttv *btv = video_drvdata(file); |
| struct bttv_fh *fh; |
| enum v4l2_buf_type type = 0; |
| |
| dprintk("open dev=%s\n", video_device_node_name(vdev)); |
| |
| if (vdev->vfl_type == VFL_TYPE_GRABBER) { |
| type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| } else if (vdev->vfl_type == VFL_TYPE_VBI) { |
| type = V4L2_BUF_TYPE_VBI_CAPTURE; |
| } else { |
| WARN_ON(1); |
| return -ENODEV; |
| } |
| |
| dprintk("%d: open called (type=%s)\n", |
| btv->c.nr, v4l2_type_names[type]); |
| |
| /* allocate per filehandle data */ |
| fh = kmalloc(sizeof(*fh), GFP_KERNEL); |
| if (unlikely(!fh)) |
| return -ENOMEM; |
| file->private_data = fh; |
| |
| *fh = btv->init; |
| |
| fh->type = type; |
| fh->ov.setup_ok = 0; |
| |
| v4l2_prio_open(&btv->prio, &fh->prio); |
| |
| videobuf_queue_sg_init(&fh->cap, &bttv_video_qops, |
| &btv->c.pci->dev, &btv->s_lock, |
| V4L2_BUF_TYPE_VIDEO_CAPTURE, |
| V4L2_FIELD_INTERLACED, |
| sizeof(struct bttv_buffer), |
| fh, &btv->lock); |
| videobuf_queue_sg_init(&fh->vbi, &bttv_vbi_qops, |
| &btv->c.pci->dev, &btv->s_lock, |
| V4L2_BUF_TYPE_VBI_CAPTURE, |
| V4L2_FIELD_SEQ_TB, |
| sizeof(struct bttv_buffer), |
| fh, &btv->lock); |
| set_tvnorm(btv,btv->tvnorm); |
| set_input(btv, btv->input, btv->tvnorm); |
| |
| btv->users++; |
| |
| /* The V4L2 spec requires one global set of cropping parameters |
| which only change on request. These are stored in btv->crop[1]. |
| However for compatibility with V4L apps and cropping unaware |
| V4L2 apps we now reset the cropping parameters as seen through |
| this fh, which is to say VIDIOC_G_CROP and scaling limit checks |
| will use btv->crop[0], the default cropping parameters for the |
| current video standard, and VIDIOC_S_FMT will not implicitely |
| change the cropping parameters until VIDIOC_S_CROP has been |
| called. */ |
| fh->do_crop = !reset_crop; /* module parameter */ |
| |
| /* Likewise there should be one global set of VBI capture |
| parameters, but for compatibility with V4L apps and earlier |
| driver versions each fh has its own parameters. */ |
| bttv_vbi_fmt_reset(&fh->vbi_fmt, btv->tvnorm); |
| |
| bttv_field_count(btv); |
| return 0; |
| } |
| |
| static int bttv_release(struct file *file) |
| { |
| struct bttv_fh *fh = file->private_data; |
| struct bttv *btv = fh->btv; |
| |
| /* turn off overlay */ |
| if (check_btres(fh, RESOURCE_OVERLAY)) |
| bttv_switch_overlay(btv,fh,NULL); |
| |
| /* stop video capture */ |
| if (check_btres(fh, RESOURCE_VIDEO_STREAM)) { |
| videobuf_streamoff(&fh->cap); |
| free_btres_lock(btv,fh,RESOURCE_VIDEO_STREAM); |
| } |
| if (fh->cap.read_buf) { |
| buffer_release(&fh->cap,fh->cap.read_buf); |
| kfree(fh->cap.read_buf); |
| } |
| if (check_btres(fh, RESOURCE_VIDEO_READ)) { |
| free_btres_lock(btv, fh, RESOURCE_VIDEO_READ); |
| } |
| |
| /* stop vbi capture */ |
| if (check_btres(fh, RESOURCE_VBI)) { |
| videobuf_stop(&fh->vbi); |
| free_btres_lock(btv,fh,RESOURCE_VBI); |
| } |
| |
| /* free stuff */ |
| |
| videobuf_mmap_free(&fh->cap); |
| videobuf_mmap_free(&fh->vbi); |
| v4l2_prio_close(&btv->prio, fh->prio); |
| file->private_data = NULL; |
| kfree(fh); |
| |
| btv->users--; |
| bttv_field_count(btv); |
| |
| if (!btv->users) |
| audio_mute(btv, 1); |
| |
| return 0; |
| } |
| |
| static int |
| bttv_mmap(struct file *file, struct vm_area_struct *vma) |
| { |
| struct bttv_fh *fh = file->private_data; |
| |
| dprintk("%d: mmap type=%s 0x%lx+%ld\n", |
| fh->btv->c.nr, v4l2_type_names[fh->type], |
| vma->vm_start, vma->vm_end - vma->vm_start); |
| return videobuf_mmap_mapper(bttv_queue(fh),vma); |
| } |
| |
| static const struct v4l2_file_operations bttv_fops = |
| { |
| .owner = THIS_MODULE, |
| .open = bttv_open, |
| .release = bttv_release, |
| .unlocked_ioctl = video_ioctl2, |
| .read = bttv_read, |
| .mmap = bttv_mmap, |
| .poll = bttv_poll, |
| }; |
| |
| static const struct v4l2_ioctl_ops bttv_ioctl_ops = { |
| .vidioc_querycap = bttv_querycap, |
| .vidioc_enum_fmt_vid_cap = bttv_enum_fmt_vid_cap, |
| .vidioc_g_fmt_vid_cap = bttv_g_fmt_vid_cap, |
| .vidioc_try_fmt_vid_cap = bttv_try_fmt_vid_cap, |
| .vidioc_s_fmt_vid_cap = bttv_s_fmt_vid_cap, |
| .vidioc_enum_fmt_vid_overlay = bttv_enum_fmt_vid_overlay, |
| .vidioc_g_fmt_vid_overlay = bttv_g_fmt_vid_overlay, |
| .vidioc_try_fmt_vid_overlay = bttv_try_fmt_vid_overlay, |
| .vidioc_s_fmt_vid_overlay = bttv_s_fmt_vid_overlay, |
| .vidioc_g_fmt_vbi_cap = bttv_g_fmt_vbi_cap, |
| .vidioc_try_fmt_vbi_cap = bttv_try_fmt_vbi_cap, |
| .vidioc_s_fmt_vbi_cap = bttv_s_fmt_vbi_cap, |
| .vidioc_g_audio = bttv_g_audio, |
| .vidioc_s_audio = bttv_s_audio, |
| .vidioc_cropcap = bttv_cropcap, |
| .vidioc_reqbufs = bttv_reqbufs, |
| .vidioc_querybuf = bttv_querybuf, |
| .vidioc_qbuf = bttv_qbuf, |
| .vidioc_dqbuf = bttv_dqbuf, |
| .vidioc_s_std = bttv_s_std, |
| .vidioc_enum_input = bttv_enum_input, |
| .vidioc_g_input = bttv_g_input, |
| .vidioc_s_input = bttv_s_input, |
| .vidioc_queryctrl = bttv_queryctrl, |
| .vidioc_g_ctrl = bttv_g_ctrl, |
| .vidioc_s_ctrl = bttv_s_ctrl, |
| .vidioc_streamon = bttv_streamon, |
| .vidioc_streamoff = bttv_streamoff, |
| .vidioc_g_tuner = bttv_g_tuner, |
| .vidioc_s_tuner = bttv_s_tuner, |
| .vidioc_g_crop = bttv_g_crop, |
| .vidioc_s_crop = bttv_s_crop, |
| .vidioc_g_fbuf = bttv_g_fbuf, |
| .vidioc_s_fbuf = bttv_s_fbuf, |
| .vidioc_overlay = bttv_overlay, |
| .vidioc_g_priority = bttv_g_priority, |
| .vidioc_s_priority = bttv_s_priority, |
| .vidioc_g_parm = bttv_g_parm, |
| .vidioc_g_frequency = bttv_g_frequency, |
| .vidioc_s_frequency = bttv_s_frequency, |
| .vidioc_log_status = bttv_log_status, |
| .vidioc_querystd = bttv_querystd, |
| #ifdef CONFIG_VIDEO_ADV_DEBUG |
| .vidioc_g_register = bttv_g_register, |
| .vidioc_s_register = bttv_s_register, |
| #endif |
| }; |
| |
| static struct video_device bttv_video_template = { |
| .fops = &bttv_fops, |
| .ioctl_ops = &bttv_ioctl_ops, |
| .tvnorms = BTTV_NORMS, |
| .current_norm = V4L2_STD_PAL, |
| }; |
| |
| /* ----------------------------------------------------------------------- */ |
| /* radio interface */ |
| |
| static int radio_open(struct file *file) |
| { |
| struct video_device *vdev = video_devdata(file); |
| struct bttv *btv = video_drvdata(file); |
| struct bttv_fh *fh; |
| |
| dprintk("open dev=%s\n", video_device_node_name(vdev)); |
| |
| dprintk("%d: open called (radio)\n", btv->c.nr); |
| |
| /* allocate per filehandle data */ |
| fh = kmalloc(sizeof(*fh), GFP_KERNEL); |
| if (unlikely(!fh)) |
| return -ENOMEM; |
| file->private_data = fh; |
| *fh = btv->init; |
| |
| v4l2_prio_open(&btv->prio, &fh->prio); |
| |
| btv->radio_user++; |
| |
| bttv_call_all(btv, tuner, s_radio); |
| audio_input(btv,TVAUDIO_INPUT_RADIO); |
| |
| return 0; |
| } |
| |
| static int radio_release(struct file *file) |
| { |
| struct bttv_fh *fh = file->private_data; |
| struct bttv *btv = fh->btv; |
| struct saa6588_command cmd; |
| |
| v4l2_prio_close(&btv->prio, fh->prio); |
| file->private_data = NULL; |
| kfree(fh); |
| |
| btv->radio_user--; |
| |
| bttv_call_all(btv, core, ioctl, SAA6588_CMD_CLOSE, &cmd); |
| |
| return 0; |
| } |
| |
| static int radio_querycap(struct file *file, void *priv, |
| struct v4l2_capability *cap) |
| { |
| struct bttv_fh *fh = priv; |
| struct bttv *btv = fh->btv; |
| |
| strcpy(cap->driver, "bttv"); |
| strlcpy(cap->card, btv->radio_dev->name, sizeof(cap->card)); |
| sprintf(cap->bus_info, "PCI:%s", pci_name(btv->c.pci)); |
| cap->capabilities = V4L2_CAP_TUNER; |
| |
| return 0; |
| } |
| |
| static int radio_g_tuner(struct file *file, void *priv, struct v4l2_tuner *t) |
| { |
| struct bttv_fh *fh = priv; |
| struct bttv *btv = fh->btv; |
| |
| if (btv->tuner_type == TUNER_ABSENT) |
| return -EINVAL; |
| if (0 != t->index) |
| return -EINVAL; |
| strcpy(t->name, "Radio"); |
| t->type = V4L2_TUNER_RADIO; |
| |
| bttv_call_all(btv, tuner, g_tuner, t); |
| |
| if (btv->audio_mode_gpio) |
| btv->audio_mode_gpio(btv, t, 0); |
| |
| return 0; |
| } |
| |
| static int radio_enum_input(struct file *file, void *priv, |
| struct v4l2_input *i) |
| { |
| if (i->index != 0) |
| return -EINVAL; |
| |
| strcpy(i->name, "Radio"); |
| i->type = V4L2_INPUT_TYPE_TUNER; |
| |
| return 0; |
| } |
| |
| static int radio_g_audio(struct file *file, void *priv, |
| struct v4l2_audio *a) |
| { |
| if (unlikely(a->index)) |
| return -EINVAL; |
| |
| strcpy(a->name, "Radio"); |
| |
| return 0; |
| } |
| |
| static int radio_s_tuner(struct file *file, void *priv, |
| struct v4l2_tuner *t) |
| { |
| struct bttv_fh *fh = priv; |
| struct bttv *btv = fh->btv; |
| |
| if (0 != t->index) |
| return -EINVAL; |
| |
| bttv_call_all(btv, tuner, s_tuner, t); |
| return 0; |
| } |
| |
| static int radio_s_audio(struct file *file, void *priv, |
| struct v4l2_audio *a) |
| { |
| if (unlikely(a->index)) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static int radio_s_input(struct file *filp, void *priv, unsigned int i) |
| { |
| if (unlikely(i)) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static int radio_s_std(struct file *file, void *fh, v4l2_std_id *norm) |
| { |
| return 0; |
| } |
| |
| static int radio_queryctrl(struct file *file, void *priv, |
| struct v4l2_queryctrl *c) |
| { |
| const struct v4l2_queryctrl *ctrl; |
| |
| if (c->id < V4L2_CID_BASE || |
| c->id >= V4L2_CID_LASTP1) |
| return -EINVAL; |
| |
| if (c->id == V4L2_CID_AUDIO_MUTE) { |
| ctrl = ctrl_by_id(c->id); |
| *c = *ctrl; |
| } else |
| *c = no_ctl; |
| |
| return 0; |
| } |
| |
| static int radio_g_input(struct file *filp, void *priv, unsigned int *i) |
| { |
| *i = 0; |
| return 0; |
| } |
| |
| static ssize_t radio_read(struct file *file, char __user *data, |
| size_t count, loff_t *ppos) |
| { |
| struct bttv_fh *fh = file->private_data; |
| struct bttv *btv = fh->btv; |
| struct saa6588_command cmd; |
| cmd.block_count = count/3; |
| cmd.buffer = data; |
| cmd.instance = file; |
| cmd.result = -ENODEV; |
| |
| bttv_call_all(btv, core, ioctl, SAA6588_CMD_READ, &cmd); |
| |
| return cmd.result; |
| } |
| |
| static unsigned int radio_poll(struct file *file, poll_table *wait) |
| { |
| struct bttv_fh *fh = file->private_data; |
| struct bttv *btv = fh->btv; |
| struct saa6588_command cmd; |
| cmd.instance = file; |
| cmd.event_list = wait; |
| cmd.result = -ENODEV; |
| bttv_call_all(btv, core, ioctl, SAA6588_CMD_POLL, &cmd); |
| |
| return cmd.result; |
| } |
| |
| static const struct v4l2_file_operations radio_fops = |
| { |
| .owner = THIS_MODULE, |
| .open = radio_open, |
| .read = radio_read, |
| .release = radio_release, |
| .unlocked_ioctl = video_ioctl2, |
| .poll = radio_poll, |
| }; |
| |
| static const struct v4l2_ioctl_ops radio_ioctl_ops = { |
| .vidioc_querycap = radio_querycap, |
| .vidioc_g_tuner = radio_g_tuner, |
| .vidioc_enum_input = radio_enum_input, |
| .vidioc_g_audio = radio_g_audio, |
| .vidioc_s_tuner = radio_s_tuner, |
| .vidioc_s_audio = radio_s_audio, |
| .vidioc_s_input = radio_s_input, |
| .vidioc_s_std = radio_s_std, |
| .vidioc_queryctrl = radio_queryctrl, |
| .vidioc_g_input = radio_g_input, |
| .vidioc_g_ctrl = bttv_g_ctrl, |
| .vidioc_s_ctrl = bttv_s_ctrl, |
| .vidioc_g_frequency = bttv_g_frequency, |
| .vidioc_s_frequency = bttv_s_frequency, |
| }; |
| |
| static struct video_device radio_template = { |
| .fops = &radio_fops, |
| .ioctl_ops = &radio_ioctl_ops, |
| }; |
| |
| /* ----------------------------------------------------------------------- */ |
| /* some debug code */ |
| |
| static int bttv_risc_decode(u32 risc) |
| { |
| static char *instr[16] = { |
| [ BT848_RISC_WRITE >> 28 ] = "write", |
| [ BT848_RISC_SKIP >> 28 ] = "skip", |
| [ BT848_RISC_WRITEC >> 28 ] = "writec", |
| [ BT848_RISC_JUMP >> 28 ] = "jump", |
| [ BT848_RISC_SYNC >> 28 ] = "sync", |
| [ BT848_RISC_WRITE123 >> 28 ] = "write123", |
| [ BT848_RISC_SKIP123 >> 28 ] = "skip123", |
| [ BT848_RISC_WRITE1S23 >> 28 ] = "write1s23", |
| }; |
| static int incr[16] = { |
| [ BT848_RISC_WRITE >> 28 ] = 2, |
| [ BT848_RISC_JUMP >> 28 ] = 2, |
| [ BT848_RISC_SYNC >> 28 ] = 2, |
| [ BT848_RISC_WRITE123 >> 28 ] = 5, |
| [ BT848_RISC_SKIP123 >> 28 ] = 2, |
| [ BT848_RISC_WRITE1S23 >> 28 ] = 3, |
| }; |
| static char *bits[] = { |
| "be0", "be1", "be2", "be3/resync", |
| "set0", "set1", "set2", "set3", |
| "clr0", "clr1", "clr2", "clr3", |
| "irq", "res", "eol", "sol", |
| }; |
| int i; |
| |
| pr_cont("0x%08x [ %s", risc, |
| instr[risc >> 28] ? instr[risc >> 28] : "INVALID"); |
| for (i = ARRAY_SIZE(bits)-1; i >= 0; i--) |
| if (risc & (1 << (i + 12))) |
| pr_cont(" %s", bits[i]); |
| pr_cont(" count=%d ]\n", risc & 0xfff); |
| return incr[risc >> 28] ? incr[risc >> 28] : 1; |
| } |
| |
| static void bttv_risc_disasm(struct bttv *btv, |
| struct btcx_riscmem *risc) |
| { |
| unsigned int i,j,n; |
| |
| pr_info("%s: risc disasm: %p [dma=0x%08lx]\n", |
| btv->c.v4l2_dev.name, risc->cpu, (unsigned long)risc->dma); |
| for (i = 0; i < (risc->size >> 2); i += n) { |
| pr_info("%s: 0x%lx: ", |
| btv->c.v4l2_dev.name, |
| (unsigned long)(risc->dma + (i<<2))); |
| n = bttv_risc_decode(le32_to_cpu(risc->cpu[i])); |
| for (j = 1; j < n; j++) |
| pr_info("%s: 0x%lx: 0x%08x [ arg #%d ]\n", |
| btv->c.v4l2_dev.name, |
| (unsigned long)(risc->dma + ((i+j)<<2)), |
| risc->cpu[i+j], j); |
| if (0 == risc->cpu[i]) |
| break; |
| } |
| } |
| |
| static void bttv_print_riscaddr(struct bttv *btv) |
| { |
| pr_info(" main: %08llx\n", (unsigned long long)btv->main.dma); |
| pr_info(" vbi : o=%08llx e=%08llx\n", |
| btv->cvbi ? (unsigned long long)btv->cvbi->top.dma : 0, |
| btv->cvbi ? (unsigned long long)btv->cvbi->bottom.dma : 0); |
| pr_info(" cap : o=%08llx e=%08llx\n", |
| btv->curr.top |
| ? (unsigned long long)btv->curr.top->top.dma : 0, |
| btv->curr.bottom |
| ? (unsigned long long)btv->curr.bottom->bottom.dma : 0); |
| pr_info(" scr : o=%08llx e=%08llx\n", |
| btv->screen ? (unsigned long long)btv->screen->top.dma : 0, |
| btv->screen ? (unsigned long long)btv->screen->bottom.dma : 0); |
| bttv_risc_disasm(btv, &btv->main); |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| /* irq handler */ |
| |
| static char *irq_name[] = { |
| "FMTCHG", // format change detected (525 vs. 625) |
| "VSYNC", // vertical sync (new field) |
| "HSYNC", // horizontal sync |
| "OFLOW", // chroma/luma AGC overflow |
| "HLOCK", // horizontal lock changed |
| "VPRES", // video presence changed |
| "6", "7", |
| "I2CDONE", // hw irc operation finished |
| "GPINT", // gpio port triggered irq |
| "10", |
| "RISCI", // risc instruction triggered irq |
| "FBUS", // pixel data fifo dropped data (high pci bus latencies) |
| "FTRGT", // pixel data fifo overrun |
| "FDSR", // fifo data stream resyncronisation |
| "PPERR", // parity error (data transfer) |
| "RIPERR", // parity error (read risc instructions) |
| "PABORT", // pci abort |
| "OCERR", // risc instruction error |
| "SCERR", // syncronisation error |
| }; |
| |
| static void bttv_print_irqbits(u32 print, u32 mark) |
| { |
| unsigned int i; |
| |
| pr_cont("bits:"); |
| for (i = 0; i < ARRAY_SIZE(irq_name); i++) { |
| if (print & (1 << i)) |
| pr_cont(" %s", irq_name[i]); |
| if (mark & (1 << i)) |
| pr_cont("*"); |
| } |
| } |
| |
| static void bttv_irq_debug_low_latency(struct bttv *btv, u32 rc) |
| { |
| pr_warn("%d: irq: skipped frame [main=%lx,o_vbi=%lx,o_field=%lx,rc=%lx]\n", |
| btv->c.nr, |
| (unsigned long)btv->main.dma, |
| (unsigned long)le32_to_cpu(btv->main.cpu[RISC_SLOT_O_VBI+1]), |
| (unsigned long)le32_to_cpu(btv->main.cpu[RISC_SLOT_O_FIELD+1]), |
| (unsigned long)rc); |
| |
| if (0 == (btread(BT848_DSTATUS) & BT848_DSTATUS_HLOC)) { |
| pr_notice("%d: Oh, there (temporarily?) is no input signal. " |
| "Ok, then this is harmless, don't worry ;)\n", |
| btv->c.nr); |
| return; |
| } |
| pr_notice("%d: Uhm. Looks like we have unusual high IRQ latencies\n", |
| btv->c.nr); |
| pr_notice("%d: Lets try to catch the culpit red-handed ...\n", |
| btv->c.nr); |
| dump_stack(); |
| } |
| |
| static int |
| bttv_irq_next_video(struct bttv *btv, struct bttv_buffer_set *set) |
| { |
| struct bttv_buffer *item; |
| |
| memset(set,0,sizeof(*set)); |
| |
| /* capture request ? */ |
| if (!list_empty(&btv->capture)) { |
| set->frame_irq = 1; |
| item = list_entry(btv->capture.next, struct bttv_buffer, vb.queue); |
| if (V4L2_FIELD_HAS_TOP(item->vb.field)) |
| set->top = item; |
| if (V4L2_FIELD_HAS_BOTTOM(item->vb.field)) |
| set->bottom = item; |
| |
| /* capture request for other field ? */ |
| if (!V4L2_FIELD_HAS_BOTH(item->vb.field) && |
| (item->vb.queue.next != &btv->capture)) { |
| item = list_entry(item->vb.queue.next, struct bttv_buffer, vb.queue); |
| /* Mike Isely <isely@pobox.com> - Only check |
| * and set up the bottom field in the logic |
| * below. Don't ever do the top field. This |
| * of course means that if we set up the |
| * bottom field in the above code that we'll |
| * actually skip a field. But that's OK. |
| * Having processed only a single buffer this |
| * time, then the next time around the first |
| * available buffer should be for a top field. |
| * That will then cause us here to set up a |
| * top then a bottom field in the normal way. |
| * The alternative to this understanding is |
| * that we set up the second available buffer |
| * as a top field, but that's out of order |
| * since this driver always processes the top |
| * field first - the effect will be the two |
| * buffers being returned in the wrong order, |
| * with the second buffer also being delayed |
| * by one field time (owing to the fifo nature |
| * of videobuf). Worse still, we'll be stuck |
| * doing fields out of order now every time |
| * until something else causes a field to be |
| * dropped. By effectively forcing a field to |
| * drop this way then we always get back into |
| * sync within a single frame time. (Out of |
| * order fields can screw up deinterlacing |
| * algorithms.) */ |
| if (!V4L2_FIELD_HAS_BOTH(item->vb.field)) { |
| if (NULL == set->bottom && |
| V4L2_FIELD_BOTTOM == item->vb.field) { |
| set->bottom = item; |
| } |
| if (NULL != set->top && NULL != set->bottom) |
| set->top_irq = 2; |
| } |
| } |
| } |
| |
| /* screen overlay ? */ |
| if (NULL != btv->screen) { |
| if (V4L2_FIELD_HAS_BOTH(btv->screen->vb.field)) { |
| if (NULL == set->top && NULL == set->bottom) { |
| set->top = btv->screen; |
| set->bottom = btv->screen; |
| } |
| } else { |
| if (V4L2_FIELD_TOP == btv->screen->vb.field && |
| NULL == set->top) { |
| set->top = btv->screen; |
| } |
| if (V4L2_FIELD_BOTTOM == btv->screen->vb.field && |
| NULL == set->bottom) { |
| set->bottom = btv->screen; |
| } |
| } |
| } |
| |
| dprintk("%d: next set: top=%p bottom=%p [screen=%p,irq=%d,%d]\n", |
| btv->c.nr, set->top, set->bottom, |
| btv->screen, set->frame_irq, set->top_irq); |
| return 0; |
| } |
| |
| static void |
| bttv_irq_wakeup_video(struct bttv *btv, struct bttv_buffer_set *wakeup, |
| struct bttv_buffer_set *curr, unsigned int state) |
| { |
| struct timeval ts; |
| |
| do_gettimeofday(&ts); |
| |
| if (wakeup->top == wakeup->bottom) { |
| if (NULL != wakeup->top && curr->top != wakeup->top) { |
| if (irq_debug > 1) |
| pr_debug("%d: wakeup: both=%p\n", |
| btv->c.nr, wakeup->top); |
| wakeup->top->vb.ts = ts; |
| wakeup->top->vb.field_count = btv->field_count; |
| wakeup->top->vb.state = state; |
| wake_up(&wakeup->top->vb.done); |
| } |
| } else { |
| if (NULL != wakeup->top && curr->top != wakeup->top) { |
| if (irq_debug > 1) |
| pr_debug("%d: wakeup: top=%p\n", |
| btv->c.nr, wakeup->top); |
| wakeup->top->vb.ts = ts; |
| wakeup->top->vb.field_count = btv->field_count; |
| wakeup->top->vb.state = state; |
| wake_up(&wakeup->top->vb.done); |
| } |
| if (NULL != wakeup->bottom && curr->bottom != wakeup->bottom) { |
| if (irq_debug > 1) |
| pr_debug("%d: wakeup: bottom=%p\n", |
| btv->c.nr, wakeup->bottom); |
| wakeup->bottom->vb.ts = ts; |
| wakeup->bottom->vb.field_count = btv->field_count; |
| wakeup->bottom->vb.state = state; |
| wake_up(&wakeup->bottom->vb.done); |
| } |
| } |
| } |
| |
| static void |
| bttv_irq_wakeup_vbi(struct bttv *btv, struct bttv_buffer *wakeup, |
| unsigned int state) |
| { |
| struct timeval ts; |
| |
| if (NULL == wakeup) |
| return; |
| |
| do_gettimeofday(&ts); |
| wakeup->vb.ts = ts; |
| wakeup->vb.field_count = btv->field_count; |
| wakeup->vb.state = state; |
| wake_up(&wakeup->vb.done); |
| } |
| |
| static void bttv_irq_timeout(unsigned long data) |
| { |
| struct bttv *btv = (struct bttv *)data; |
| struct bttv_buffer_set old,new; |
| struct bttv_buffer *ovbi; |
| struct bttv_buffer *item; |
| unsigned long flags; |
| |
| if (bttv_verbose) { |
| pr_info("%d: timeout: drop=%d irq=%d/%d, risc=%08x, ", |
| btv->c.nr, btv->framedrop, btv->irq_me, btv->irq_total, |
| btread(BT848_RISC_COUNT)); |
| bttv_print_irqbits(btread(BT848_INT_STAT),0); |
| pr_cont("\n"); |
| } |
| |
| spin_lock_irqsave(&btv->s_lock,flags); |
| |
| /* deactivate stuff */ |
| memset(&new,0,sizeof(new)); |
| old = btv->curr; |
| ovbi = btv->cvbi; |
| btv->curr = new; |
| btv->cvbi = NULL; |
| btv->loop_irq = 0; |
| bttv_buffer_activate_video(btv, &new); |
| bttv_buffer_activate_vbi(btv, NULL); |
| bttv_set_dma(btv, 0); |
| |
| /* wake up */ |
| bttv_irq_wakeup_video(btv, &old, &new, VIDEOBUF_ERROR); |
| bttv_irq_wakeup_vbi(btv, ovbi, VIDEOBUF_ERROR); |
| |
| /* cancel all outstanding capture / vbi requests */ |
| while (!list_empty(&btv->capture)) { |
| item = list_entry(btv->capture.next, struct bttv_buffer, vb.queue); |
| list_del(&item->vb.queue); |
| item->vb.state = VIDEOBUF_ERROR; |
| wake_up(&item->vb.done); |
| } |
| while (!list_empty(&btv->vcapture)) { |
| item = list_entry(btv->vcapture.next, struct bttv_buffer, vb.queue); |
| list_del(&item->vb.queue); |
| item->vb.state = VIDEOBUF_ERROR; |
| wake_up(&item->vb.done); |
| } |
| |
| btv->errors++; |
| spin_unlock_irqrestore(&btv->s_lock,flags); |
| } |
| |
| static void |
| bttv_irq_wakeup_top(struct bttv *btv) |
| { |
| struct bttv_buffer *wakeup = btv->curr.top; |
| |
| if (NULL == wakeup) |
| return; |
| |
| spin_lock(&btv->s_lock); |
| btv->curr.top_irq = 0; |
| btv->curr.top = NULL; |
| bttv_risc_hook(btv, RISC_SLOT_O_FIELD, NULL, 0); |
| |
| do_gettimeofday(&wakeup->vb.ts); |
| wakeup->vb.field_count = btv->field_count; |
| wakeup->vb.state = VIDEOBUF_DONE; |
| wake_up(&wakeup->vb.done); |
| spin_unlock(&btv->s_lock); |
| } |
| |
| static inline int is_active(struct btcx_riscmem *risc, u32 rc) |
| { |
| if (rc < risc->dma) |
| return 0; |
| if (rc > risc->dma + risc->size) |
| return 0; |
| return 1; |
| } |
| |
| static void |
| bttv_irq_switch_video(struct bttv *btv) |
| { |
| struct bttv_buffer_set new; |
| struct bttv_buffer_set old; |
| dma_addr_t rc; |
| |
| spin_lock(&btv->s_lock); |
| |
| /* new buffer set */ |
| bttv_irq_next_video(btv, &new); |
| rc = btread(BT848_RISC_COUNT); |
| if ((btv->curr.top && is_active(&btv->curr.top->top, rc)) || |
| (btv->curr.bottom && is_active(&btv->curr.bottom->bottom, rc))) { |
| btv->framedrop++; |
| if (debug_latency) |
| bttv_irq_debug_low_latency(btv, rc); |
| spin_unlock(&btv->s_lock); |
| return; |
| } |
| |
| /* switch over */ |
| old = btv->curr; |
| btv->curr = new; |
| btv->loop_irq &= ~1; |
| bttv_buffer_activate_video(btv, &new); |
| bttv_set_dma(btv, 0); |
| |
| /* switch input */ |
| if (UNSET != btv->new_input) { |
| video_mux(btv,btv->new_input); |
| btv->new_input = UNSET; |
| } |
| |
| /* wake up finished buffers */ |
| bttv_irq_wakeup_video(btv, &old, &new, VIDEOBUF_DONE); |
| spin_unlock(&btv->s_lock); |
| } |
| |
| static void |
| bttv_irq_switch_vbi(struct bttv *btv) |
| { |
| struct bttv_buffer *new = NULL; |
| struct bttv_buffer *old; |
| u32 rc; |
| |
| spin_lock(&btv->s_lock); |
| |
| if (!list_empty(&btv->vcapture)) |
| new = list_entry(btv->vcapture.next, struct bttv_buffer, vb.queue); |
| old = btv->cvbi; |
| |
| rc = btread(BT848_RISC_COUNT); |
| if (NULL != old && (is_active(&old->top, rc) || |
| is_active(&old->bottom, rc))) { |
| btv->framedrop++; |
| if (debug_latency) |
| bttv_irq_debug_low_latency(btv, rc); |
| spin_unlock(&btv->s_lock); |
| return; |
| } |
| |
| /* switch */ |
| btv->cvbi = new; |
| btv->loop_irq &= ~4; |
| bttv_buffer_activate_vbi(btv, new); |
| bttv_set_dma(btv, 0); |
| |
| bttv_irq_wakeup_vbi(btv, old, VIDEOBUF_DONE); |
| spin_unlock(&btv->s_lock); |
| } |
| |
| static irqreturn_t bttv_irq(int irq, void *dev_id) |
| { |
| u32 stat,astat; |
| u32 dstat; |
| int count; |
| struct bttv *btv; |
| int handled = 0; |
| |
| btv=(struct bttv *)dev_id; |
| |
| count=0; |
| while (1) { |
| /* get/clear interrupt status bits */ |
| stat=btread(BT848_INT_STAT); |
| astat=stat&btread(BT848_INT_MASK); |
| if (!astat) |
| break; |
| handled = 1; |
| btwrite(stat,BT848_INT_STAT); |
| |
| /* get device status bits */ |
| dstat=btread(BT848_DSTATUS); |
| |
| if (irq_debug) { |
| pr_debug("%d: irq loop=%d fc=%d riscs=%x, riscc=%08x, ", |
| btv->c.nr, count, btv->field_count, |
| stat>>28, btread(BT848_RISC_COUNT)); |
| bttv_print_irqbits(stat,astat); |
| if (stat & BT848_INT_HLOCK) |
| pr_cont(" HLOC => %s", |
| dstat & BT848_DSTATUS_HLOC |
| ? "yes" : "no"); |
| if (stat & BT848_INT_VPRES) |
| pr_cont(" PRES => %s", |
| dstat & BT848_DSTATUS_PRES |
| ? "yes" : "no"); |
| if (stat & BT848_INT_FMTCHG) |
| pr_cont(" NUML => %s", |
| dstat & BT848_DSTATUS_NUML |
| ? "625" : "525"); |
| pr_cont("\n"); |
| } |
| |
| if (astat&BT848_INT_VSYNC) |
| btv->field_count++; |
| |
| if ((astat & BT848_INT_GPINT) && btv->remote) { |
| bttv_input_irq(btv); |
| } |
| |
| if (astat & BT848_INT_I2CDONE) { |
| btv->i2c_done = stat; |
| wake_up(&btv->i2c_queue); |
| } |
| |
| if ((astat & BT848_INT_RISCI) && (stat & (4<<28))) |
| bttv_irq_switch_vbi(btv); |
| |
| if ((astat & BT848_INT_RISCI) && (stat & (2<<28))) |
| bttv_irq_wakeup_top(btv); |
| |
| if ((astat & BT848_INT_RISCI) && (stat & (1<<28))) |
| bttv_irq_switch_video(btv); |
| |
| if ((astat & BT848_INT_HLOCK) && btv->opt_automute) |
| audio_mute(btv, btv->mute); /* trigger automute */ |
| |
| if (astat & (BT848_INT_SCERR|BT848_INT_OCERR)) { |
| pr_info("%d: %s%s @ %08x,", |
| btv->c.nr, |
| (astat & BT848_INT_SCERR) ? "SCERR" : "", |
| (astat & BT848_INT_OCERR) ? "OCERR" : "", |
| btread(BT848_RISC_COUNT)); |
| bttv_print_irqbits(stat,astat); |
| pr_cont("\n"); |
| if (bttv_debug) |
| bttv_print_riscaddr(btv); |
| } |
| if (fdsr && astat & BT848_INT_FDSR) { |
| pr_info("%d: FDSR @ %08x\n", |
| btv->c.nr, btread(BT848_RISC_COUNT)); |
| if (bttv_debug) |
| bttv_print_riscaddr(btv); |
| } |
| |
| count++; |
| if (count > 4) { |
| |
| if (count > 8 || !(astat & BT848_INT_GPINT)) { |
| btwrite(0, BT848_INT_MASK); |
| |
| pr_err("%d: IRQ lockup, cleared int mask [", |
| btv->c.nr); |
| } else { |
| pr_err("%d: IRQ lockup, clearing GPINT from int mask [", |
| btv->c.nr); |
| |
| btwrite(btread(BT848_INT_MASK) & (-1 ^ BT848_INT_GPINT), |
| BT848_INT_MASK); |
| }; |
| |
| bttv_print_irqbits(stat,astat); |
| |
| pr_cont("]\n"); |
| } |
| } |
| btv->irq_total++; |
| if (handled) |
| btv->irq_me++; |
| return IRQ_RETVAL(handled); |
| } |
| |
| |
| /* ----------------------------------------------------------------------- */ |
| /* initialitation */ |
| |
| static struct video_device *vdev_init(struct bttv *btv, |
| const struct video_device *template, |
| const char *type_name) |
| { |
| struct video_device *vfd; |
| |
| vfd = video_device_alloc(); |
| if (NULL == vfd) |
| return NULL; |
| *vfd = *template; |
| vfd->v4l2_dev = &btv->c.v4l2_dev; |
| vfd->release = video_device_release; |
| vfd->debug = bttv_debug; |
| video_set_drvdata(vfd, btv); |
| snprintf(vfd->name, sizeof(vfd->name), "BT%d%s %s (%s)", |
| btv->id, (btv->id==848 && btv->revision==0x12) ? "A" : "", |
| type_name, bttv_tvcards[btv->c.type].name); |
| return vfd; |
| } |
| |
| static void bttv_unregister_video(struct bttv *btv) |
| { |
| if (btv->video_dev) { |
| if (video_is_registered(btv->video_dev)) |
| video_unregister_device(btv->video_dev); |
| else |
| video_device_release(btv->video_dev); |
| btv->video_dev = NULL; |
| } |
| if (btv->vbi_dev) { |
| if (video_is_registered(btv->vbi_dev)) |
| video_unregister_device(btv->vbi_dev); |
| else |
| video_device_release(btv->vbi_dev); |
| btv->vbi_dev = NULL; |
| } |
| if (btv->radio_dev) { |
| if (video_is_registered(btv->radio_dev)) |
| video_unregister_device(btv->radio_dev); |
| else |
| video_device_release(btv->radio_dev); |
| btv->radio_dev = NULL; |
| } |
| } |
| |
| /* register video4linux devices */ |
| static int __devinit bttv_register_video(struct bttv *btv) |
| { |
| if (no_overlay > 0) |
| pr_notice("Overlay support disabled\n"); |
| |
| /* video */ |
| btv->video_dev = vdev_init(btv, &bttv_video_template, "video"); |
| |
| if (NULL == btv->video_dev) |
| goto err; |
| if (video_register_device(btv->video_dev, VFL_TYPE_GRABBER, |
| video_nr[btv->c.nr]) < 0) |
| goto err; |
| pr_info("%d: registered device %s\n", |
| btv->c.nr, video_device_node_name(btv->video_dev)); |
| if (device_create_file(&btv->video_dev->dev, |
| &dev_attr_card)<0) { |
| pr_err("%d: device_create_file 'card' failed\n", btv->c.nr); |
| goto err; |
| } |
| |
| /* vbi */ |
| btv->vbi_dev = vdev_init(btv, &bttv_video_template, "vbi"); |
| |
| if (NULL == btv->vbi_dev) |
| goto err; |
| if (video_register_device(btv->vbi_dev, VFL_TYPE_VBI, |
| vbi_nr[btv->c.nr]) < 0) |
| goto err; |
| pr_info("%d: registered device %s\n", |
| btv->c.nr, video_device_node_name(btv->vbi_dev)); |
| |
| if (!btv->has_radio) |
| return 0; |
| /* radio */ |
| btv->radio_dev = vdev_init(btv, &radio_template, "radio"); |
| if (NULL == btv->radio_dev) |
| goto err; |
| if (video_register_device(btv->radio_dev, VFL_TYPE_RADIO, |
| radio_nr[btv->c.nr]) < 0) |
| goto err; |
| pr_info("%d: registered device %s\n", |
| btv->c.nr, video_device_node_name(btv->radio_dev)); |
| |
| /* all done */ |
| return 0; |
| |
| err: |
| bttv_unregister_video(btv); |
| return -1; |
| } |
| |
| |
| /* on OpenFirmware machines (PowerMac at least), PCI memory cycle */ |
| /* response on cards with no firmware is not enabled by OF */ |
| static void pci_set_command(struct pci_dev *dev) |
| { |
| #if defined(__powerpc__) |
| unsigned int cmd; |
| |
| pci_read_config_dword(dev, PCI_COMMAND, &cmd); |
| cmd = (cmd | PCI_COMMAND_MEMORY ); |
| pci_write_config_dword(dev, PCI_COMMAND, cmd); |
| #endif |
| } |
| |
| static int __devinit bttv_probe(struct pci_dev *dev, |
| const struct pci_device_id *pci_id) |
| { |
| int result; |
| unsigned char lat; |
| struct bttv *btv; |
| |
| if (bttv_num == BTTV_MAX) |
| return -ENOMEM; |
| pr_info("Bt8xx card found (%d)\n", bttv_num); |
| bttvs[bttv_num] = btv = kzalloc(sizeof(*btv), GFP_KERNEL); |
| if (btv == NULL) { |
| pr_err("out of memory\n"); |
| return -ENOMEM; |
| } |
| btv->c.nr = bttv_num; |
| snprintf(btv->c.v4l2_dev.name, sizeof(btv->c.v4l2_dev.name), |
| "bttv%d", btv->c.nr); |
| |
| /* initialize structs / fill in defaults */ |
| mutex_init(&btv->lock); |
| spin_lock_init(&btv->s_lock); |
| spin_lock_init(&btv->gpio_lock); |
| init_waitqueue_head(&btv->i2c_queue); |
| INIT_LIST_HEAD(&btv->c.subs); |
| INIT_LIST_HEAD(&btv->capture); |
| INIT_LIST_HEAD(&btv->vcapture); |
| v4l2_prio_init(&btv->prio); |
| |
| init_timer(&btv->timeout); |
| btv->timeout.function = bttv_irq_timeout; |
| btv->timeout.data = (unsigned long)btv; |
| |
| btv->i2c_rc = -1; |
| btv->tuner_type = UNSET; |
| btv->new_input = UNSET; |
| btv->has_radio=radio[btv->c.nr]; |
| |
| /* pci stuff (init, get irq/mmio, ... */ |
| btv->c.pci = dev; |
| btv->id = dev->device; |
| if (pci_enable_device(dev)) { |
| pr_warn("%d: Can't enable device\n", btv->c.nr); |
| return -EIO; |
| } |
| if (pci_set_dma_mask(dev, DMA_BIT_MASK(32))) { |
| pr_warn("%d: No suitable DMA available\n", btv->c.nr); |
| return -EIO; |
| } |
| if (!request_mem_region(pci_resource_start(dev,0), |
| pci_resource_len(dev,0), |
| btv->c.v4l2_dev.name)) { |
| pr_warn("%d: can't request iomem (0x%llx)\n", |
| btv->c.nr, |
| (unsigned long long)pci_resource_start(dev, 0)); |
| return -EBUSY; |
| } |
| pci_set_master(dev); |
| pci_set_command(dev); |
| |
| result = v4l2_device_register(&dev->dev, &btv->c.v4l2_dev); |
| if (result < 0) { |
| pr_warn("%d: v4l2_device_register() failed\n", btv->c.nr); |
| goto fail0; |
| } |
| |
| btv->revision = dev->revision; |
| pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); |
| pr_info("%d: Bt%d (rev %d) at %s, irq: %d, latency: %d, mmio: 0x%llx\n", |
| bttv_num, btv->id, btv->revision, pci_name(dev), |
| btv->c.pci->irq, lat, |
| (unsigned long long)pci_resource_start(dev, 0)); |
| schedule(); |
| |
| btv->bt848_mmio = ioremap(pci_resource_start(dev, 0), 0x1000); |
| if (NULL == btv->bt848_mmio) { |
| pr_err("%d: ioremap() failed\n", btv->c.nr); |
| result = -EIO; |
| goto fail1; |
| } |
| |
| /* identify card */ |
| bttv_idcard(btv); |
| |
| /* disable irqs, register irq handler */ |
| btwrite(0, BT848_INT_MASK); |
| result = request_irq(btv->c.pci->irq, bttv_irq, |
| IRQF_SHARED | IRQF_DISABLED, btv->c.v4l2_dev.name, (void *)btv); |
| if (result < 0) { |
| pr_err("%d: can't get IRQ %d\n", |
| bttv_num, btv->c.pci->irq); |
| goto fail1; |
| } |
| |
| if (0 != bttv_handle_chipset(btv)) { |
| result = -EIO; |
| goto fail2; |
| } |
| |
| /* init options from insmod args */ |
| btv->opt_combfilter = combfilter; |
| btv->opt_lumafilter = lumafilter; |
| btv->opt_automute = automute; |
| btv->opt_chroma_agc = chroma_agc; |
| btv->opt_adc_crush = adc_crush; |
| btv->opt_vcr_hack = vcr_hack; |
| btv->opt_whitecrush_upper = whitecrush_upper; |
| btv->opt_whitecrush_lower = whitecrush_lower; |
| btv->opt_uv_ratio = uv_ratio; |
| btv->opt_full_luma_range = full_luma_range; |
| btv->opt_coring = coring; |
| |
| /* fill struct bttv with some useful defaults */ |
| btv->init.btv = btv; |
| btv->init.ov.w.width = 320; |
| btv->init.ov.w.height = 240; |
| btv->init.fmt = format_by_fourcc(V4L2_PIX_FMT_BGR24); |
| btv->init.width = 320; |
| btv->init.height = 240; |
| btv->input = 0; |
| |
| /* initialize hardware */ |
| if (bttv_gpio) |
| bttv_gpio_tracking(btv,"pre-init"); |
| |
| bttv_risc_init_main(btv); |
| init_bt848(btv); |
| |
| /* gpio */ |
| btwrite(0x00, BT848_GPIO_REG_INP); |
| btwrite(0x00, BT848_GPIO_OUT_EN); |
| if (bttv_verbose) |
| bttv_gpio_tracking(btv,"init"); |
| |
| /* needs to be done before i2c is registered */ |
| bttv_init_card1(btv); |
| |
| /* register i2c + gpio */ |
| init_bttv_i2c(btv); |
| |
| /* some card-specific stuff (needs working i2c) */ |
| bttv_init_card2(btv); |
| bttv_init_tuner(btv); |
| init_irqreg(btv); |
| |
| /* register video4linux + input */ |
| if (!bttv_tvcards[btv->c.type].no_video) { |
| bttv_register_video(btv); |
| bt848_bright(btv,32768); |
| bt848_contrast(btv,32768); |
| bt848_hue(btv,32768); |
| bt848_sat(btv,32768); |
| audio_mute(btv, 1); |
| set_input(btv, 0, btv->tvnorm); |
| bttv_crop_reset(&btv->crop[0], btv->tvnorm); |
| btv->crop[1] = btv->crop[0]; /* current = default */ |
| disclaim_vbi_lines(btv); |
| disclaim_video_lines(btv); |
| } |
| |
| /* add subdevices and autoload dvb-bt8xx if needed */ |
| if (bttv_tvcards[btv->c.type].has_dvb) { |
| bttv_sub_add_device(&btv->c, "dvb"); |
| request_modules(btv); |
| } |
| |
| if (!disable_ir) { |
| init_bttv_i2c_ir(btv); |
| bttv_input_init(btv); |
| } |
| |
| /* everything is fine */ |
| bttv_num++; |
| return 0; |
| |
| fail2: |
| free_irq(btv->c.pci->irq,btv); |
| |
| fail1: |
| v4l2_device_unregister(&btv->c.v4l2_dev); |
| |
| fail0: |
| if (btv->bt848_mmio) |
| iounmap(btv->bt848_mmio); |
| release_mem_region(pci_resource_start(btv->c.pci,0), |
| pci_resource_len(btv->c.pci,0)); |
| return result; |
| } |
| |
| static void __devexit bttv_remove(struct pci_dev *pci_dev) |
| { |
| struct v4l2_device *v4l2_dev = pci_get_drvdata(pci_dev); |
| struct bttv *btv = to_bttv(v4l2_dev); |
| |
| if (bttv_verbose) |
| pr_info("%d: unloading\n", btv->c.nr); |
| |
| if (bttv_tvcards[btv->c.type].has_dvb) |
| flush_request_modules(btv); |
| |
| /* shutdown everything (DMA+IRQs) */ |
| btand(~15, BT848_GPIO_DMA_CTL); |
| btwrite(0, BT848_INT_MASK); |
| btwrite(~0x0, BT848_INT_STAT); |
| btwrite(0x0, BT848_GPIO_OUT_EN); |
| if (bttv_gpio) |
| bttv_gpio_tracking(btv,"cleanup"); |
| |
| /* tell gpio modules we are leaving ... */ |
| btv->shutdown=1; |
| bttv_input_fini(btv); |
| bttv_sub_del_devices(&btv->c); |
| |
| /* unregister i2c_bus + input */ |
| fini_bttv_i2c(btv); |
| |
| /* unregister video4linux */ |
| bttv_unregister_video(btv); |
| |
| /* free allocated memory */ |
| btcx_riscmem_free(btv->c.pci,&btv->main); |
| |
| /* free ressources */ |
| free_irq(btv->c.pci->irq,btv); |
| iounmap(btv->bt848_mmio); |
| release_mem_region(pci_resource_start(btv->c.pci,0), |
| pci_resource_len(btv->c.pci,0)); |
| |
| v4l2_device_unregister(&btv->c.v4l2_dev); |
| bttvs[btv->c.nr] = NULL; |
| kfree(btv); |
| |
| return; |
| } |
| |
| #ifdef CONFIG_PM |
| static int bttv_suspend(struct pci_dev *pci_dev, pm_message_t state) |
| { |
| struct v4l2_device *v4l2_dev = pci_get_drvdata(pci_dev); |
| struct bttv *btv = to_bttv(v4l2_dev); |
| struct bttv_buffer_set idle; |
| unsigned long flags; |
| |
| dprintk("%d: suspend %d\n", btv->c.nr, state.event); |
| |
| /* stop dma + irqs */ |
| spin_lock_irqsave(&btv->s_lock,flags); |
| memset(&idle, 0, sizeof(idle)); |
| btv->state.video = btv->curr; |
| btv->state.vbi = btv->cvbi; |
| btv->state.loop_irq = btv->loop_irq; |
| btv->curr = idle; |
| btv->loop_irq = 0; |
| bttv_buffer_activate_video(btv, &idle); |
| bttv_buffer_activate_vbi(btv, NULL); |
| bttv_set_dma(btv, 0); |
| btwrite(0, BT848_INT_MASK); |
| spin_unlock_irqrestore(&btv->s_lock,flags); |
| |
| /* save bt878 state */ |
| btv->state.gpio_enable = btread(BT848_GPIO_OUT_EN); |
| btv->state.gpio_data = gpio_read(); |
| |
| /* save pci state */ |
| pci_save_state(pci_dev); |
| if (0 != pci_set_power_state(pci_dev, pci_choose_state(pci_dev, state))) { |
| pci_disable_device(pci_dev); |
| btv->state.disabled = 1; |
| } |
| return 0; |
| } |
| |
| static int bttv_resume(struct pci_dev *pci_dev) |
| { |
| struct v4l2_device *v4l2_dev = pci_get_drvdata(pci_dev); |
| struct bttv *btv = to_bttv(v4l2_dev); |
| unsigned long flags; |
| int err; |
| |
| dprintk("%d: resume\n", btv->c.nr); |
| |
| /* restore pci state */ |
| if (btv->state.disabled) { |
| err=pci_enable_device(pci_dev); |
| if (err) { |
| pr_warn("%d: Can't enable device\n", btv->c.nr); |
| return err; |
| } |
| btv->state.disabled = 0; |
| } |
| err=pci_set_power_state(pci_dev, PCI_D0); |
| if (err) { |
| pci_disable_device(pci_dev); |
| pr_warn("%d: Can't enable device\n", btv->c.nr); |
| btv->state.disabled = 1; |
| return err; |
| } |
| |
| pci_restore_state(pci_dev); |
| |
| /* restore bt878 state */ |
| bttv_reinit_bt848(btv); |
| gpio_inout(0xffffff, btv->state.gpio_enable); |
| gpio_write(btv->state.gpio_data); |
| |
| /* restart dma */ |
| spin_lock_irqsave(&btv->s_lock,flags); |
| btv->curr = btv->state.video; |
| btv->cvbi = btv->state.vbi; |
| btv->loop_irq = btv->state.loop_irq; |
| bttv_buffer_activate_video(btv, &btv->curr); |
| bttv_buffer_activate_vbi(btv, btv->cvbi); |
| bttv_set_dma(btv, 0); |
| spin_unlock_irqrestore(&btv->s_lock,flags); |
| return 0; |
| } |
| #endif |
| |
| static struct pci_device_id bttv_pci_tbl[] = { |
| {PCI_VDEVICE(BROOKTREE, PCI_DEVICE_ID_BT848), 0}, |
| {PCI_VDEVICE(BROOKTREE, PCI_DEVICE_ID_BT849), 0}, |
| {PCI_VDEVICE(BROOKTREE, PCI_DEVICE_ID_BT878), 0}, |
| {PCI_VDEVICE(BROOKTREE, PCI_DEVICE_ID_BT879), 0}, |
| {0,} |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, bttv_pci_tbl); |
| |
| static struct pci_driver bttv_pci_driver = { |
| .name = "bttv", |
| .id_table = bttv_pci_tbl, |
| .probe = bttv_probe, |
| .remove = __devexit_p(bttv_remove), |
| #ifdef CONFIG_PM |
| .suspend = bttv_suspend, |
| .resume = bttv_resume, |
| #endif |
| }; |
| |
| static int __init bttv_init_module(void) |
| { |
| int ret; |
| |
| bttv_num = 0; |
| |
| pr_info("driver version %s loaded\n", BTTV_VERSION); |
| if (gbuffers < 2 || gbuffers > VIDEO_MAX_FRAME) |
| gbuffers = 2; |
| if (gbufsize > BTTV_MAX_FBUF) |
| gbufsize = BTTV_MAX_FBUF; |
| gbufsize = (gbufsize + PAGE_SIZE - 1) & PAGE_MASK; |
| if (bttv_verbose) |
| pr_info("using %d buffers with %dk (%d pages) each for capture\n", |
| gbuffers, gbufsize >> 10, gbufsize >> PAGE_SHIFT); |
| |
| bttv_check_chipset(); |
| |
| ret = bus_register(&bttv_sub_bus_type); |
| if (ret < 0) { |
| pr_warn("bus_register error: %d\n", ret); |
| return ret; |
| } |
| ret = pci_register_driver(&bttv_pci_driver); |
| if (ret < 0) |
| bus_unregister(&bttv_sub_bus_type); |
| |
| return ret; |
| } |
| |
| static void __exit bttv_cleanup_module(void) |
| { |
| pci_unregister_driver(&bttv_pci_driver); |
| bus_unregister(&bttv_sub_bus_type); |
| } |
| |
| module_init(bttv_init_module); |
| module_exit(bttv_cleanup_module); |
| |
| /* |
| * Local variables: |
| * c-basic-offset: 8 |
| * End: |
| */ |