| /* UART */ |
| #define LCR_CHAR_LEN_5 0x00 /* default */ |
| #define LCR_CHAR_LEN_6 0x01 |
| #define LCR_CHAR_LEN_7 0x02 |
| #define LCR_CHAR_LEN_8 0x03 |
| #define LCR_ONE_STOP 0x00 /* One stop bit! - default */ |
| #define LCR_TWO_STOP 0x04 /* Two stop bit! */ |
| #define LCR_PEN 0x08 /* Parity Enable */ |
| #define LCR_PARITY_NONE 0x00 |
| #define LCR_EPS 0x10 /* Even Parity Select */ |
| #define LCR_PS 0x20 /* Enable Parity Stuff */ |
| #define LCR_SBRK 0x40 /* Start Break */ |
| #define LCR_PSB 0x80 /* Parity Stuff Bit */ |
| #define LCR_DLAB 0x80 /* UART 16550 Divisor Latch Assess */ |
| |
| #define LSR_FIFOE (1 << 7) /* FIFO Error Status */ |
| #define LSR_TEMT (1 << 6) /* Transmitter Empty */ |
| #define LSR_TDRQ (1 << 5) /* Transmit Data Request */ |
| #define LSR_BI (1 << 4) /* Break Interrupt */ |
| #define LSR_FE (1 << 3) /* Framing Error */ |
| #define LSR_PE (1 << 2) /* Parity Error */ |
| #define LSR_OE (1 << 1) /* Overrun Error */ |
| #define LSR_DR (1 << 0) /* Data Ready */ |
| |
| #define IER_DMAE (1 << 7) /* DMA Requests Enable */ |
| #define IER_UUE (1 << 6) /* UART Unit Enable */ |
| #define IER_NRZE (1 << 5) /* NRZ coding Enable */ |
| #define IER_RTIOE (1 << 4) /* Receiver Time Out Interrupt Enable */ |
| #define IER_MIE (1 << 3) /* Modem Interrupt Enable */ |
| #define IER_RLSE (1 << 2) /* Receiver Line Status Interrupt Enable */ |
| #define IER_TIE (1 << 1) /* Transmit Data request Interrupt Enable */ |
| #define IER_RAVIE (1 << 0) /* Receiver Data Available Interrupt Enable */ |
| |
| #define IIR_FIFOES1 (1 << 7) /* FIFO Mode Enable Status */ |
| #define IIR_FIFOES0 (1 << 6) /* FIFO Mode Enable Status */ |
| #define IIR_TOD (1 << 3) /* Time Out Detected */ |
| #define IIR_IID2 (1 << 2) /* Interrupt Source Encoded */ |
| #define IIR_IID1 (1 << 1) /* Interrupt Source Encoded */ |
| #define IIR_IP (1 << 0) /* Interrupt Pending (active low) */ |
| |
| /* UART 16550 FIFO Control Register */ |
| #define FCR_FIFOEN 0x01 |
| #define FCR_RCVRRES 0x02 |
| #define FCR_XMITRES 0x04 |
| |
| /* Interrupt Enable Register */ |
| /* UART 16550 */ |
| #define IER_RXTH 0x01 /* Enable Received Data Available Interrupt */ |
| #define IER_TXTH 0x02 /* Enable Transmitter Empty Interrupt */ |
| |
| #define UART_THR 0x00 |
| #define UART_RBR 0x00 |
| #define UART_DLL 0x00 |
| #define UART_IER 0x04 |
| #define UART_DLH 0x04 |
| #define UART_IIR 0x08 |
| #define UART_FCR 0x08 |
| #define UART_LCR 0x0C |
| #define UART_MCR 0x10 |
| #define UART_LSR 0x14 |
| #define UART_MSR 0x18 |
| #define UART_SCR 0x1C |
| |
| |
