arch/arm/mach-comcerto/include/mach/comcerto-2000.h - kernel/mindspeed - Git at Google

 /*
  *  arch/arm/arch-comcerto/include/mach/comcerto-2000.h
  *
  *  Copyright (C) 2011 Mindspeed Technologies, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */

 #ifndef __ASM_ARCH_HARDWARE_H
 #error "Do not include this directly, instead #include <asm/hardware.h>"
 #endif

 #ifndef __ASM_ARCH_COMCERTO2000_H__
 #define __ASM_ARCH_COMCERTO2000_H__


 /*
   * System Clock Frequencies
   */
 #ifdef CONFIG_RTSM_C2K
 #define COMCERTO_DEFAULTAXICLK          (600000000/3) /* Hz */
 #else
 #define COMCERTO_DEFAULTAXICLK          200000000 /* Hz */
 #endif


 /*
  * SCU registers
  */
 #define COMCERTO_SCU_BASE					0xFFF00000
 #define COMCERTO_GIC_CPU_BASE				(COMCERTO_SCU_BASE + 0x100)
 #define COMCERTO_TWD_BASE					(COMCERTO_SCU_BASE + 0x600)
 #define COMCERTO_TWD_PERCPU_BASE			(COMCERTO_SCU_BASE + 0x700)
 #define COMCERTO_GIC_DIST_BASE				(COMCERTO_SCU_BASE + 0x1000)
 #define COMCERTO_L310_BASE					(COMCERTO_SCU_BASE + 0x10000)

 #define COMCERTO_L2CC_ASSOCIATIVITY_SHIFT	16
 #define COMCERTO_L2CC_ASSOCIATIVITY_MASK	0x00010000
 #define COMCERTO_L2CC_ASSOCIATIVITY_8WAY	0x0
 #define COMCERTO_L2CC_ASSOCIATIVITY_16WAY	0x1

 #define COMCERTO_L2CC_WAYSIZE_SHIFT			17
 #define COMCERTO_L2CC_WAYSIZE_MASK			0x000E0000
 #define COMCERTO_L2CC_ASSOCIATIVITY_32KB	0x2

 #define COMCERTO_L2CC_WR_LAT_SHIFT			8
 #define COMCERTO_L2CC_RD_LAT_SHIFT			4


 /*
   * Physical address of IO on APB Bus
   */

 #define COMCERTO_APB_TDM_BASE			0x90400000
 #define COMCERTO_APB_USBPHY_SERDES_STAT_BASE	0x90410000
 #define COMCERTO_APB_TDMA_BASE			0x90420000
 #define COMCERTO_APB_TIMER_BASE			0x90450000
 #define COMCERTO_APB_PCI_SATA_USB_CTRL_BASE	0x90460000
 #define COMCERTO_APB_GPIO_BASE			0x90470000
 #define COMCERTO_APB_UART0_BASE			0x90490000
 #define COMCERTO_APB_SPI_BASE			0x90498000
 #define COMCERTO_APB_I2C_BASE			0x9049C000
 #define COMCERTO_APB_USB3_BASE			0x904A0000
 #define COMCERTO_APB_CLK_BASE			0x904B0000
 #define COMCERTO_APB_RTC_BASE			0x904E0000
 #define COMCERTO_APB_OTP_BASE			0x904F0000
 #define COMCERTO_APB_PFE_BASE			0x90500000
 #define COMCERTO_APB_SERDES_CONF_BASE		0x90590000
 #define COMCERTO_APB_EXPBUS_BASE		0x905A0000
 #define COMCERTO_APB_DDRPHY_BASE		0x905B0000
 #define COMCERTO_APB_TDMA2_BASE			0x905D0000
 #define COMCERTO_APB_MDMA_BASE			0x905E0000
 #define COMCERTO_APB_A9CS_BASE			0x90600000


 /*
   * Physical address on AXI Bus
   */
 #define COMCERTO_AXI_HIGHMEMDDR_BASE		0xFFFF0000
 #define COMCERTO_AXI_DDR_BASE			0x00000000
 #define COMCERTO_AXI_ACP_BASE			0x80000000 /* 48MB */
 #define COMCERTO_AXI_IRAM_BASE			0x83000000
 #define COMCERTO_AXI_IBR_BASE			0x90000000
 #define COMCERTO_AXI_APB_BASE			0x90400000 /* 12MB */
 #define COMCERTO_AXI_SEMA_BASE			0x91000000 /* 16MB */
 #define COMCERTO_AXI_USB2P0_BASE		0x92000000
 #define COMCERTO_AXI_TRUSTZONE_BASE		0x93000000
 #define COMCERTO_AXI_DPI0_BASE			0x94000000 /* 16MB */
 #define COMCERTO_AXI_DPI1_BASE			0x95000000 /* 16MB */
 #define COMCERTO_AXI_UART_SPI_BASE		0x96000000 /* 16MB */
 #define COMCERTO_AXI_UART0_BASE			(COMCERTO_AXI_UART_SPI_BASE + 0x00300000)
 #define COMCERTO_AXI_UART1_BASE			(COMCERTO_AXI_UART_SPI_BASE + 0x00400000)
 #define COMCERTO_AXI_SPI_BASE			(COMCERTO_AXI_UART_SPI_BASE + 0x00500000)
 #define COMCERTO_AXI_DDRCONFIG_BASE		0x97000000
 #define COMCERTO_AXI_PCIe1_BASE			0x99000000
 #define COMCERTO_AXI_PCIe0_BASE			0x98000000
 #define COMCERTO_AXI_IPSEC_BASE			0x9A000000
 #define COMCERTO_AXI_SPACC_PDU_BASE		0x9B000000 /* 16MB */
 #define COMCERTO_AXI_PFE_BASE			0x9C000000 /* 16MB */
 #define COMCERTO_AXI_SATA_BASE			0x9D000000 /* 16MB */
 #define COMCERTO_AXI_DECT_BASE			0x9E000000 /* 16MB */
 #define COMCERTO_AXI_USB3P0_BASE                0x9F000000 /* 16MB */
 #define COMCERTO_AXI_PCIe0_SLAVE_BASE	0xA0000000
 #define COMCERTO_AXI_PCIe1_SLAVE_BASE	0xB0000000
 #define COMCERTO_AXI_EXP_BASE			0xC0000000
 #define COMCERTO_AXI_EXP_ECC_BASE		0xCFFF0000 /* 64KB */

 #define COMCERTO_AXI_ACP_SIZE			(1 << 24)

 #define COMCERTO_DDR_SHARED_BASE		(COMCERTO_AXI_DDR_BASE + 0x2C00000)
 #define COMCERTO_DDR_SHARED_SIZE		(SZ_16M + SZ_4M)

 /* MSP memory map */
 #define COMCERTO_MSP_DDR_BASE			COMCERTO_DDR_SHARED_BASE
 #define COMCERTO_MSP_DDR_SIZE_CB		(SZ_1M * 5)
 #define COMCERTO_MSP_DDR_SIZE_NCNB		(SZ_1M * 3)
 #define COMCERTO_MSP_DDR_SIZE			(COMCERTO_MSP_DDR_SIZE_CB + COMCERTO_MSP_DDR_SIZE_NCNB)

 /* PFE memory map */
 #define COMCERTO_APB_PFE_SIZE			SZ_64K
 #define COMCERTO_AXI_PFE_SIZE			SZ_16M
 #define COMCERTO_AXI_IPSEC_SIZE			SZ_16M
 #define COMCERTO_PFE_DDR_BASE			(COMCERTO_DDR_SHARED_BASE + SZ_8M)
 #define COMCERTO_PFE_DDR_SIZE			(SZ_8M + SZ_4M)
 #define COMCERTO_PFE_IRAM_BASE			(COMCERTO_AXI_IRAM_BASE + 0x0000)
 #define COMCERTO_PFE_IRAM_SIZE			SZ_8K

 #define IO_SPACE_LIMIT					0

 /* MDMA memory map */
 #define COMCERTO_APB_MDMA_SIZE          SZ_1K+SZ_4

 /*
  * Virtual address mapping
  */
 #define COMCERTO_MSP_VADDR			0xf0000000
 #define COMCERTO_PFE_VADDR                     0xfa000000
 #define COMCERTO_PFE_AXI_VADDR         0xfc000000
 #define COMCERTO_SCU_VADDR				COMCERTO_SCU_BASE
 #define COMCERTO_GIC_CPU_VADDR			(COMCERTO_SCU_VADDR + 0x100)
 #define COMCERTO_GIC_GLOBAL_TIMER_VADDR	(COMCERTO_SCU_VADDR + 0x200)
 #define COMCERTO_TWD_VADDR				(COMCERTO_SCU_VADDR + 0x600)
 #define COMCERTO_GIC_DIST_VADDR			(COMCERTO_SCU_VADDR + 0x1000)
 #define COMCERTO_L310_VADDR				(COMCERTO_SCU_VADDR + 0x10000)

 #define COMCERTO_DISTR_INT_SET_PENDING                   (COMCERTO_GIC_DIST_VADDR + 0x200)
 #define COMCERTO_DISTR_INT_SET_PENDING_OFFSET_4          (COMCERTO_DISTR_INT_SET_PENDING + 0x4)
 #define COMCERTO_DISTR_INT_SET_PENDING_OFFSET_8          (COMCERTO_DISTR_INT_SET_PENDING + 0x8)

 #define IRAM_MEMORY_VADDR			0xf0800000
 #define COMCERTO_APB_VADDR				0xf0900000	/* VA of IO on APB bus */
 #define COMCERTO_APB_SIZE				0x00C00000
 #define COMCERTO_AXI_UART_SPI_VADDR		0xF1600000
 #define COMCERTO_AXI_UART_SPI_SIZE		0x01000000
 #define COMCERTO_AXI_DMA_VADDR			(COMCERTO_AXI_UART_SPI_VADDR+0x00000000)
 #define COMCERTO_AXI_UART0_VADDR		(COMCERTO_AXI_UART_SPI_VADDR+0x00300000)
 #define COMCERTO_AXI_UART1_VADDR		(COMCERTO_AXI_UART_SPI_VADDR+0x00400000)
 #define COMCERTO_AXI_SSI_VADDR			(COMCERTO_AXI_UART_SPI_VADDR+0x00500000)

 #define COMCERTO_SEMA_VADDR			0xf4000000
 #define COMCERTO_AXI_PCIe0_VADDR_BASE		0xf5000000
 #define COMCERTO_AXI_PCIe1_VADDR_BASE		0xf6000000
 #define COMCERTO_DECT_VADDR			0xf7000000

 /*
   * Reference Clock Option in Boot Strap Register
   *
   * BIT [9:8] System PLL Refclk Select
   * '00' - USB XTAL
   * '01' - Serdes #0 Refclk
   * '10' - Serdes #1 Refclk
   * '11' - Serdes XTAL
   *
   * BIT[7]   Serdes OSC PAD - Reference clock frequency selection bootstrap (inverted value of SF1)
   * '0' - 30MHz ~ 50MHz
   * '1' - 15MHz ~ 30MHz
   * Note: SF0 is tied to 1 in GPIO block and might later on be controlled during DFT
   *
   * BIT[5]   USB/Sys PLL OSC PAD - Reference clock frequency selection bootstrap (inverted value of SF1)
   *'0' - 30MHz ~ 50MHz
   * '1' - 15MHz ~ 30MHz
   * Note: SF0 is tied to 1 in GPIO block and might later on be controlled during DFT
   *
   */

 #define GPIO_SYS_PLL_REF_CLK_MASK			(0x00000100 | 0x00000200)
 #define GPIO_SYS_PLL_REF_CLK_SHIFT			8

 #define USB_XTAL_REF_CLK					0
 #define SERDES_0_REF_CLK					1
 #define SERDES_2_REF_CLK					2
 #define SERDES_XTAL_REF_CLK					3

 #define GPIO_SERDES_OSC_PAD_MASK			(0x00000080)
 #define GPIO_SERDES_OSC_PAD_SHIFT			7

 #define GPIO_USB_OSC_PAD_MASK				(0x00000020)
 #define GPIO_USB_OSC_PAD_SHIFT				5

 #define REF_CLK_24MHZ						24000000 /* 24 MHz */
 #define REF_CLK_48MHZ						48000000 /* 48 MHz */


 /* USB 2.0 */
 #define USB2_PHY_BASE						APB_VADDR(COMCERTO_APB_PCI_SATA_USB_CTRL_BASE)

 /* USB 3.0 */
 #define USB3_PHY_BASE           APB_VADDR(COMCERTO_APB_USB3_BASE)

 #define USBPHY_SERDES_STAT_BASE APB_VADDR(COMCERTO_APB_USBPHY_SERDES_STAT_BASE)

 /* Includes */
 #include <mach/comcerto-2000/clk-rst.h>
 #include <mach/comcerto-2000/timer.h>
 #include <mach/comcerto-2000/gpio.h>
 #include <mach/comcerto-2000/exp-bus.h>
 #include <mach/comcerto-2000/pcie.h>
 #include <mach/comcerto-2000/serdes.h>
 #include <mach/comcerto-2000/memory.h>
 #include <mach/c2k_dma.h>

 #define comcerto_timer4_set(hbound)	__raw_writel((hbound), COMCERTO_TIMER4_HIGH_BOUND)

 #define comcerto_timer4_get()		__raw_readl(COMCERTO_TIMER4_CURRENT_COUNT)


 #define comcerto_timer5_set(lbound, hbound, ctrl)  do {								\
 						      __raw_writel((ctrl) & 0x1, COMCERTO_TIMER5_CTRL);	\
 						      __raw_writel((lbound), COMCERTO_TIMER5_LOW_BOUND);	\
 						      __raw_writel((hbound), COMCERTO_TIMER5_HIGH_BOUND);	\
 						   } while(0)

 #define comcerto_timer5_get()		__raw_readl(COMCERTO_TIMER5_CURRENT_COUNT)

 /* Number of gemacs supported in comcerto 2000 */
 #define NUM_GEMAC_SUPPORT	3

 #endif
	/*
	* arch/arm/arch-comcerto/include/mach/comcerto-2000.h
	*
	* Copyright (C) 2011 Mindspeed Technologies, Inc.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
	*/

	#ifndef __ASM_ARCH_HARDWARE_H
	#error "Do not include this directly, instead #include <asm/hardware.h>"
	#endif

	#ifndef __ASM_ARCH_COMCERTO2000_H__
	#define __ASM_ARCH_COMCERTO2000_H__


	/*
	* System Clock Frequencies
	*/
	#ifdef CONFIG_RTSM_C2K
	#define COMCERTO_DEFAULTAXICLK (600000000/3) /* Hz */
	#else
	#define COMCERTO_DEFAULTAXICLK 200000000 /* Hz */
	#endif


	/*
	* SCU registers
	*/
	#define COMCERTO_SCU_BASE 0xFFF00000
	#define COMCERTO_GIC_CPU_BASE (COMCERTO_SCU_BASE + 0x100)
	#define COMCERTO_TWD_BASE (COMCERTO_SCU_BASE + 0x600)
	#define COMCERTO_TWD_PERCPU_BASE (COMCERTO_SCU_BASE + 0x700)
	#define COMCERTO_GIC_DIST_BASE (COMCERTO_SCU_BASE + 0x1000)
	#define COMCERTO_L310_BASE (COMCERTO_SCU_BASE + 0x10000)

	#define COMCERTO_L2CC_ASSOCIATIVITY_SHIFT 16
	#define COMCERTO_L2CC_ASSOCIATIVITY_MASK 0x00010000
	#define COMCERTO_L2CC_ASSOCIATIVITY_8WAY 0x0
	#define COMCERTO_L2CC_ASSOCIATIVITY_16WAY 0x1

	#define COMCERTO_L2CC_WAYSIZE_SHIFT 17
	#define COMCERTO_L2CC_WAYSIZE_MASK 0x000E0000
	#define COMCERTO_L2CC_ASSOCIATIVITY_32KB 0x2

	#define COMCERTO_L2CC_WR_LAT_SHIFT 8
	#define COMCERTO_L2CC_RD_LAT_SHIFT 4


	/*
	* Physical address of IO on APB Bus
	*/

	#define COMCERTO_APB_TDM_BASE 0x90400000
	#define COMCERTO_APB_USBPHY_SERDES_STAT_BASE 0x90410000
	#define COMCERTO_APB_TDMA_BASE 0x90420000
	#define COMCERTO_APB_TIMER_BASE 0x90450000
	#define COMCERTO_APB_PCI_SATA_USB_CTRL_BASE 0x90460000
	#define COMCERTO_APB_GPIO_BASE 0x90470000
	#define COMCERTO_APB_UART0_BASE 0x90490000
	#define COMCERTO_APB_SPI_BASE 0x90498000
	#define COMCERTO_APB_I2C_BASE 0x9049C000
	#define COMCERTO_APB_USB3_BASE 0x904A0000
	#define COMCERTO_APB_CLK_BASE 0x904B0000
	#define COMCERTO_APB_RTC_BASE 0x904E0000
	#define COMCERTO_APB_OTP_BASE 0x904F0000
	#define COMCERTO_APB_PFE_BASE 0x90500000
	#define COMCERTO_APB_SERDES_CONF_BASE 0x90590000
	#define COMCERTO_APB_EXPBUS_BASE 0x905A0000
	#define COMCERTO_APB_DDRPHY_BASE 0x905B0000
	#define COMCERTO_APB_TDMA2_BASE 0x905D0000
	#define COMCERTO_APB_MDMA_BASE 0x905E0000
	#define COMCERTO_APB_A9CS_BASE 0x90600000


	/*
	* Physical address on AXI Bus
	*/
	#define COMCERTO_AXI_HIGHMEMDDR_BASE 0xFFFF0000
	#define COMCERTO_AXI_DDR_BASE 0x00000000
	#define COMCERTO_AXI_ACP_BASE 0x80000000 /* 48MB */
	#define COMCERTO_AXI_IRAM_BASE 0x83000000
	#define COMCERTO_AXI_IBR_BASE 0x90000000
	#define COMCERTO_AXI_APB_BASE 0x90400000 /* 12MB */
	#define COMCERTO_AXI_SEMA_BASE 0x91000000 /* 16MB */
	#define COMCERTO_AXI_USB2P0_BASE 0x92000000
	#define COMCERTO_AXI_TRUSTZONE_BASE 0x93000000
	#define COMCERTO_AXI_DPI0_BASE 0x94000000 /* 16MB */
	#define COMCERTO_AXI_DPI1_BASE 0x95000000 /* 16MB */
	#define COMCERTO_AXI_UART_SPI_BASE 0x96000000 /* 16MB */
	#define COMCERTO_AXI_UART0_BASE (COMCERTO_AXI_UART_SPI_BASE + 0x00300000)
	#define COMCERTO_AXI_UART1_BASE (COMCERTO_AXI_UART_SPI_BASE + 0x00400000)
	#define COMCERTO_AXI_SPI_BASE (COMCERTO_AXI_UART_SPI_BASE + 0x00500000)
	#define COMCERTO_AXI_DDRCONFIG_BASE 0x97000000
	#define COMCERTO_AXI_PCIe1_BASE 0x99000000
	#define COMCERTO_AXI_PCIe0_BASE 0x98000000
	#define COMCERTO_AXI_IPSEC_BASE 0x9A000000
	#define COMCERTO_AXI_SPACC_PDU_BASE 0x9B000000 /* 16MB */
	#define COMCERTO_AXI_PFE_BASE 0x9C000000 /* 16MB */
	#define COMCERTO_AXI_SATA_BASE 0x9D000000 /* 16MB */
	#define COMCERTO_AXI_DECT_BASE 0x9E000000 /* 16MB */
	#define COMCERTO_AXI_USB3P0_BASE 0x9F000000 /* 16MB */
	#define COMCERTO_AXI_PCIe0_SLAVE_BASE 0xA0000000
	#define COMCERTO_AXI_PCIe1_SLAVE_BASE 0xB0000000
	#define COMCERTO_AXI_EXP_BASE 0xC0000000
	#define COMCERTO_AXI_EXP_ECC_BASE 0xCFFF0000 /* 64KB */

	#define COMCERTO_AXI_ACP_SIZE (1 << 24)

	#define COMCERTO_DDR_SHARED_BASE (COMCERTO_AXI_DDR_BASE + 0x2C00000)
	#define COMCERTO_DDR_SHARED_SIZE (SZ_16M + SZ_4M)

	/* MSP memory map */
	#define COMCERTO_MSP_DDR_BASE COMCERTO_DDR_SHARED_BASE
	#define COMCERTO_MSP_DDR_SIZE_CB (SZ_1M * 5)
	#define COMCERTO_MSP_DDR_SIZE_NCNB (SZ_1M * 3)
	#define COMCERTO_MSP_DDR_SIZE (COMCERTO_MSP_DDR_SIZE_CB + COMCERTO_MSP_DDR_SIZE_NCNB)

	/* PFE memory map */
	#define COMCERTO_APB_PFE_SIZE SZ_64K
	#define COMCERTO_AXI_PFE_SIZE SZ_16M
	#define COMCERTO_AXI_IPSEC_SIZE SZ_16M
	#define COMCERTO_PFE_DDR_BASE (COMCERTO_DDR_SHARED_BASE + SZ_8M)
	#define COMCERTO_PFE_DDR_SIZE (SZ_8M + SZ_4M)
	#define COMCERTO_PFE_IRAM_BASE (COMCERTO_AXI_IRAM_BASE + 0x0000)
	#define COMCERTO_PFE_IRAM_SIZE SZ_8K

	#define IO_SPACE_LIMIT 0

	/* MDMA memory map */
	#define COMCERTO_APB_MDMA_SIZE SZ_1K+SZ_4

	/*
	* Virtual address mapping
	*/
	#define COMCERTO_MSP_VADDR 0xf0000000
	#define COMCERTO_PFE_VADDR 0xfa000000
	#define COMCERTO_PFE_AXI_VADDR 0xfc000000
	#define COMCERTO_SCU_VADDR COMCERTO_SCU_BASE
	#define COMCERTO_GIC_CPU_VADDR (COMCERTO_SCU_VADDR + 0x100)
	#define COMCERTO_GIC_GLOBAL_TIMER_VADDR (COMCERTO_SCU_VADDR + 0x200)
	#define COMCERTO_TWD_VADDR (COMCERTO_SCU_VADDR + 0x600)
	#define COMCERTO_GIC_DIST_VADDR (COMCERTO_SCU_VADDR + 0x1000)
	#define COMCERTO_L310_VADDR (COMCERTO_SCU_VADDR + 0x10000)

	#define COMCERTO_DISTR_INT_SET_PENDING (COMCERTO_GIC_DIST_VADDR + 0x200)
	#define COMCERTO_DISTR_INT_SET_PENDING_OFFSET_4 (COMCERTO_DISTR_INT_SET_PENDING + 0x4)
	#define COMCERTO_DISTR_INT_SET_PENDING_OFFSET_8 (COMCERTO_DISTR_INT_SET_PENDING + 0x8)

	#define IRAM_MEMORY_VADDR 0xf0800000
	#define COMCERTO_APB_VADDR 0xf0900000 /* VA of IO on APB bus */
	#define COMCERTO_APB_SIZE 0x00C00000
	#define COMCERTO_AXI_UART_SPI_VADDR 0xF1600000
	#define COMCERTO_AXI_UART_SPI_SIZE 0x01000000
	#define COMCERTO_AXI_DMA_VADDR (COMCERTO_AXI_UART_SPI_VADDR+0x00000000)
	#define COMCERTO_AXI_UART0_VADDR (COMCERTO_AXI_UART_SPI_VADDR+0x00300000)
	#define COMCERTO_AXI_UART1_VADDR (COMCERTO_AXI_UART_SPI_VADDR+0x00400000)
	#define COMCERTO_AXI_SSI_VADDR (COMCERTO_AXI_UART_SPI_VADDR+0x00500000)

	#define COMCERTO_SEMA_VADDR 0xf4000000
	#define COMCERTO_AXI_PCIe0_VADDR_BASE 0xf5000000
	#define COMCERTO_AXI_PCIe1_VADDR_BASE 0xf6000000
	#define COMCERTO_DECT_VADDR 0xf7000000

	/*
	* Reference Clock Option in Boot Strap Register
	*
	* BIT [9:8] System PLL Refclk Select
	* '00' - USB XTAL
	* '01' - Serdes #0 Refclk
	* '10' - Serdes #1 Refclk
	* '11' - Serdes XTAL
	*
	* BIT[7] Serdes OSC PAD - Reference clock frequency selection bootstrap (inverted value of SF1)
	* '0' - 30MHz ~ 50MHz
	* '1' - 15MHz ~ 30MHz
	* Note: SF0 is tied to 1 in GPIO block and might later on be controlled during DFT
	*
	* BIT[5] USB/Sys PLL OSC PAD - Reference clock frequency selection bootstrap (inverted value of SF1)
	*'0' - 30MHz ~ 50MHz
	* '1' - 15MHz ~ 30MHz
	* Note: SF0 is tied to 1 in GPIO block and might later on be controlled during DFT
	*
	*/

	#define GPIO_SYS_PLL_REF_CLK_MASK (0x00000100 \| 0x00000200)
	#define GPIO_SYS_PLL_REF_CLK_SHIFT 8

	#define USB_XTAL_REF_CLK 0
	#define SERDES_0_REF_CLK 1
	#define SERDES_2_REF_CLK 2
	#define SERDES_XTAL_REF_CLK 3

	#define GPIO_SERDES_OSC_PAD_MASK (0x00000080)
	#define GPIO_SERDES_OSC_PAD_SHIFT 7

	#define GPIO_USB_OSC_PAD_MASK (0x00000020)
	#define GPIO_USB_OSC_PAD_SHIFT 5

	#define REF_CLK_24MHZ 24000000 /* 24 MHz */
	#define REF_CLK_48MHZ 48000000 /* 48 MHz */


	/* USB 2.0 */
	#define USB2_PHY_BASE APB_VADDR(COMCERTO_APB_PCI_SATA_USB_CTRL_BASE)

	/* USB 3.0 */
	#define USB3_PHY_BASE APB_VADDR(COMCERTO_APB_USB3_BASE)

	#define USBPHY_SERDES_STAT_BASE APB_VADDR(COMCERTO_APB_USBPHY_SERDES_STAT_BASE)

	/* Includes */
	#include <mach/comcerto-2000/clk-rst.h>
	#include <mach/comcerto-2000/timer.h>
	#include <mach/comcerto-2000/gpio.h>
	#include <mach/comcerto-2000/exp-bus.h>
	#include <mach/comcerto-2000/pcie.h>
	#include <mach/comcerto-2000/serdes.h>
	#include <mach/comcerto-2000/memory.h>
	#include <mach/c2k_dma.h>

	#define comcerto_timer4_set(hbound) __raw_writel((hbound), COMCERTO_TIMER4_HIGH_BOUND)

	#define comcerto_timer4_get() __raw_readl(COMCERTO_TIMER4_CURRENT_COUNT)


	#define comcerto_timer5_set(lbound, hbound, ctrl) do { \
	__raw_writel((ctrl) & 0x1, COMCERTO_TIMER5_CTRL); \
	__raw_writel((lbound), COMCERTO_TIMER5_LOW_BOUND); \
	__raw_writel((hbound), COMCERTO_TIMER5_HIGH_BOUND); \
	} while(0)

	#define comcerto_timer5_get() __raw_readl(COMCERTO_TIMER5_CURRENT_COUNT)

	/* Number of gemacs supported in comcerto 2000 */
	#define NUM_GEMAC_SUPPORT 3

	#endif