| /* |
| * NXP TDA10071 + Conexant CX24118A DVB-S/S2 demodulator + tuner driver |
| * |
| * Copyright (C) 2011 Antti Palosaari <crope@iki.fi> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. |
| */ |
| |
| #ifndef TDA10071_PRIV |
| #define TDA10071_PRIV |
| |
| #include "dvb_frontend.h" |
| #include "tda10071.h" |
| #include <linux/firmware.h> |
| |
| struct tda10071_priv { |
| struct i2c_adapter *i2c; |
| struct dvb_frontend fe; |
| struct tda10071_config cfg; |
| |
| u8 meas_count[2]; |
| u32 ber; |
| u32 ucb; |
| fe_status_t fe_status; |
| fe_delivery_system_t delivery_system; |
| bool warm; /* FW running */ |
| }; |
| |
| static struct tda10071_modcod { |
| fe_delivery_system_t delivery_system; |
| fe_modulation_t modulation; |
| fe_code_rate_t fec; |
| u8 val; |
| } TDA10071_MODCOD[] = { |
| /* NBC-QPSK */ |
| { SYS_DVBS2, QPSK, FEC_AUTO, 0x00 }, |
| { SYS_DVBS2, QPSK, FEC_1_2, 0x04 }, |
| { SYS_DVBS2, QPSK, FEC_3_5, 0x05 }, |
| { SYS_DVBS2, QPSK, FEC_2_3, 0x06 }, |
| { SYS_DVBS2, QPSK, FEC_3_4, 0x07 }, |
| { SYS_DVBS2, QPSK, FEC_4_5, 0x08 }, |
| { SYS_DVBS2, QPSK, FEC_5_6, 0x09 }, |
| { SYS_DVBS2, QPSK, FEC_8_9, 0x0a }, |
| { SYS_DVBS2, QPSK, FEC_9_10, 0x0b }, |
| /* 8PSK */ |
| { SYS_DVBS2, PSK_8, FEC_AUTO, 0x00 }, |
| { SYS_DVBS2, PSK_8, FEC_3_5, 0x0c }, |
| { SYS_DVBS2, PSK_8, FEC_2_3, 0x0d }, |
| { SYS_DVBS2, PSK_8, FEC_3_4, 0x0e }, |
| { SYS_DVBS2, PSK_8, FEC_5_6, 0x0f }, |
| { SYS_DVBS2, PSK_8, FEC_8_9, 0x10 }, |
| { SYS_DVBS2, PSK_8, FEC_9_10, 0x11 }, |
| /* QPSK */ |
| { SYS_DVBS, QPSK, FEC_AUTO, 0x2d }, |
| { SYS_DVBS, QPSK, FEC_1_2, 0x2e }, |
| { SYS_DVBS, QPSK, FEC_2_3, 0x2f }, |
| { SYS_DVBS, QPSK, FEC_3_4, 0x30 }, |
| { SYS_DVBS, QPSK, FEC_5_6, 0x31 }, |
| { SYS_DVBS, QPSK, FEC_7_8, 0x32 }, |
| }; |
| |
| struct tda10071_reg_val_mask { |
| u8 reg; |
| u8 val; |
| u8 mask; |
| }; |
| |
| /* firmware filename */ |
| #define TDA10071_FIRMWARE "dvb-fe-tda10071.fw" |
| |
| /* firmware commands */ |
| #define CMD_DEMOD_INIT 0x10 |
| #define CMD_CHANGE_CHANNEL 0x11 |
| #define CMD_MPEG_CONFIG 0x13 |
| #define CMD_TUNER_INIT 0x15 |
| #define CMD_GET_AGCACC 0x1a |
| |
| #define CMD_LNB_CONFIG 0x20 |
| #define CMD_LNB_SEND_DISEQC 0x21 |
| #define CMD_LNB_SET_DC_LEVEL 0x22 |
| #define CMD_LNB_PCB_CONFIG 0x23 |
| #define CMD_LNB_SEND_TONEBURST 0x24 |
| #define CMD_LNB_UPDATE_REPLY 0x25 |
| |
| #define CMD_GET_FW_VERSION 0x35 |
| #define CMD_SET_SLEEP_MODE 0x36 |
| #define CMD_BER_CONTROL 0x3e |
| #define CMD_BER_UPDATE_COUNTERS 0x3f |
| |
| /* firmware command struct */ |
| #define TDA10071_ARGLEN 30 |
| struct tda10071_cmd { |
| u8 args[TDA10071_ARGLEN]; |
| u8 len; |
| }; |
| |
| |
| #endif /* TDA10071_PRIV */ |