arch/arm/boot/dts/gfsc100.dts

/dts-v1/;

#include "ls1024a.dtsi"
/ {
	model = "Google SpaceCast (GFSC100)";
	compatible = "google,gfsc100", "fsl,ls1024a";

	chosen {
		bootargs = "log_buf_len=8M";
	};

	memory {
		device_type = "memory";
		reg = <0x80000000 0x40000000>; /* 1 GB */
	};

	pwmleds {
		compatible = "pwm-leds";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_gfsc100_leds>;

		pwmledblue: pwmledblue {
			label = "blue";
			pwms = <&pwm 4 1000000>;
			max-brightness = <200>;
		};
		pwmledred: pwmledred {
			label = "red";
			pwms = <&pwm 5 1000000>;
			max-brightness = <200>;
			linux,default-trigger = "default-on";
		};
	};
};

&pinctrl0 {
	tpm_int {
		gpio-hog;
		gpios = <0 GPIO_ACTIVE_HIGH>;
		input;
		line-name = "tpm_int";
	};
	fan_control_alert {
		gpio-hog;
		gpios = <1 GPIO_ACTIVE_HIGH>;
		input;
		line-name = "fan_control_alert";
	};
	usb_brg_rst_n {
		gpio-hog;
		gpios = <9 GPIO_ACTIVE_LOW>;
		output-low;
		line-name = "usb_brg_rst_n";
	};
	m88rs6k_rst_n {
		gpio-hog;
		gpios = <11 GPIO_ACTIVE_LOW>;
		output-low;
		line-name = "m88rs6k_rst_n";
	};
	mv88E1512_rst_n {
		gpio-hog;
		gpios = <14 GPIO_ACTIVE_LOW>;
		output-low;
		line-name = "mv88e1512_rst_n";
	};
	usb_power {
		gpio-hog;
		gpios = <15 GPIO_ACTIVE_HIGH>;
		output-high;
		line-name = "usb_power";
	};
	lnb_fault_n {
		gpio-hog;
		gpios = <47 GPIO_ACTIVE_HIGH>;
		input;
		line-name = "lnb_fault_n";
	};
	lnb_pwr_sel {
		gpio-hog;
		gpios = <51 GPIO_ACTIVE_HIGH>;
		output-low;
		line-name = "lnb_pwr_sel";
	};
	hw_rev_0 {
		gpio-hog;
		gpios = <52 GPIO_ACTIVE_HIGH>;
		input;
		line-name = "hw_rev_0";
	};
	hw_rev_1 {
		gpio-hog;
		gpios = <53 GPIO_ACTIVE_HIGH>;
		input;
		line-name = "hw_rev_1";
	};
	hw_rev_2 {
		gpio-hog;
		gpios = <54 GPIO_ACTIVE_HIGH>;
		input;
		line-name = "hw_rev_2";
	};
	board_id_0 {
		gpio-hog;
		gpios = <55 GPIO_ACTIVE_HIGH>;
		input;
		line-name = "board_id_0";
	};
	board_id_1 {
		gpio-hog;
		gpios = <56 GPIO_ACTIVE_HIGH>;
		input;
		line-name = "board_id_1";
	};
	board_id_2 {
		gpio-hog;
		gpios = <57 GPIO_ACTIVE_HIGH>;
		input;
		line-name = "board_id_2";
	};
	pinctrl_gfsc100_leds: gfsc100-leds-grp {
		leds {
			groups = "pwm4", "pwm5";
			function = "pwm";
		};
	};
	pinctrl_i2c: i2cgrp {
		i2c {
			groups = "i2c";
			function = "i2c";
		};
	};
};

/* TODO(mka@): specify the partition layout only in the bootloader */
&nor0 {
	uloader@0 {
		label = "uloader";
		reg = <0x0 0x20000>;
	};
	loader0@20000 {
		label = "loader0";
		reg = <0x20000 0x80000>;
	};
	loader1@a0000 {
		label = "loader1";
		reg = <0xa0000 0x80000>;
	};
	env@120000 {
		label = "env";
		reg = <0x120000 0x20000>;
	};
	hnvram@140000 {
		label = "hnvram";
		reg = <0x140000 0x200000>;
	};
	kernel0@340000 {
		label = "kernel0";
		reg = <0x340000 0x600000>;
	};
	kernel1@940000 {
		label = "kernel1";
		reg = <0x940000 0x600000>;
	};
	norreserved0@F40000 {
		label = "norreserved0";
		reg = <0xF40000 0x00c0000>;
	};
};

&i2c0 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c>;
	tpm_i2c_infineon: tpm_i2c_infineon@20 {
		compatible = "infineon,tpm_i2c_infineon";
		reg = <0x20>;
	};
	lm63: lm63@4c {
		compatible = "national,lm63";
		reg = <0x4c>;
	};
};

&usb2_phy {
	status = "okay";
};

&usb2 {
	status = "okay";
	dr_mode = "host";
};

&usb3_phy {
	status = "okay";
};

&usb3 {
	status = "okay";
	dr_mode = "host";
};