| if ARCH_EP93XX |
| |
| menu "Cirrus EP93xx Implementation Options" |
| |
| config EP93XX_SOC_COMMON |
| bool |
| default y |
| select SOC_BUS |
| select LEDS_GPIO_REGISTER |
| |
| config CRUNCH |
| bool "Support for MaverickCrunch" |
| help |
| Enable kernel support for MaverickCrunch. |
| |
| comment "EP93xx Platforms" |
| |
| choice |
| prompt "EP93xx first SDRAM bank selection" |
| default EP93XX_SDCE3_SYNC_PHYS_OFFSET |
| |
| config EP93XX_SDCE3_SYNC_PHYS_OFFSET |
| bool "0x00000000 - SDCE3/SyncBoot" |
| help |
| Select this option if you want support for EP93xx boards with the |
| first SDRAM bank at 0x00000000. |
| |
| config EP93XX_SDCE0_PHYS_OFFSET |
| bool "0xc0000000 - SDCEO" |
| help |
| Select this option if you want support for EP93xx boards with the |
| first SDRAM bank at 0xc0000000. |
| |
| config EP93XX_SDCE1_PHYS_OFFSET |
| bool "0xd0000000 - SDCE1" |
| help |
| Select this option if you want support for EP93xx boards with the |
| first SDRAM bank at 0xd0000000. |
| |
| config EP93XX_SDCE2_PHYS_OFFSET |
| bool "0xe0000000 - SDCE2" |
| help |
| Select this option if you want support for EP93xx boards with the |
| first SDRAM bank at 0xe0000000. |
| |
| config EP93XX_SDCE3_ASYNC_PHYS_OFFSET |
| bool "0xf0000000 - SDCE3/AsyncBoot" |
| help |
| Select this option if you want support for EP93xx boards with the |
| first SDRAM bank at 0xf0000000. |
| |
| endchoice |
| |
| config MACH_ADSSPHERE |
| bool "Support ADS Sphere" |
| depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET |
| help |
| Say 'Y' here if you want your kernel to support the ADS |
| Sphere board. |
| |
| config MACH_EDB93XX |
| bool |
| |
| config MACH_EDB9301 |
| bool "Support Cirrus Logic EDB9301" |
| depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET |
| select MACH_EDB93XX |
| help |
| Say 'Y' here if you want your kernel to support the Cirrus |
| Logic EDB9301 Evaluation Board. |
| |
| config MACH_EDB9302 |
| bool "Support Cirrus Logic EDB9302" |
| depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET |
| select MACH_EDB93XX |
| help |
| Say 'Y' here if you want your kernel to support the Cirrus |
| Logic EDB9302 Evaluation Board. |
| |
| config MACH_EDB9302A |
| bool "Support Cirrus Logic EDB9302A" |
| depends on EP93XX_SDCE0_PHYS_OFFSET |
| select MACH_EDB93XX |
| help |
| Say 'Y' here if you want your kernel to support the Cirrus |
| Logic EDB9302A Evaluation Board. |
| |
| config MACH_EDB9307 |
| bool "Support Cirrus Logic EDB9307" |
| depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET |
| select MACH_EDB93XX |
| help |
| Say 'Y' here if you want your kernel to support the Cirrus |
| Logic EDB9307 Evaluation Board. |
| |
| config MACH_EDB9307A |
| bool "Support Cirrus Logic EDB9307A" |
| depends on EP93XX_SDCE0_PHYS_OFFSET |
| select MACH_EDB93XX |
| help |
| Say 'Y' here if you want your kernel to support the Cirrus |
| Logic EDB9307A Evaluation Board. |
| |
| config MACH_EDB9312 |
| bool "Support Cirrus Logic EDB9312" |
| depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET |
| select MACH_EDB93XX |
| help |
| Say 'Y' here if you want your kernel to support the Cirrus |
| Logic EDB9312 Evaluation Board. |
| |
| config MACH_EDB9315 |
| bool "Support Cirrus Logic EDB9315" |
| depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET |
| select MACH_EDB93XX |
| help |
| Say 'Y' here if you want your kernel to support the Cirrus |
| Logic EDB9315 Evaluation Board. |
| |
| config MACH_EDB9315A |
| bool "Support Cirrus Logic EDB9315A" |
| depends on EP93XX_SDCE0_PHYS_OFFSET |
| select MACH_EDB93XX |
| help |
| Say 'Y' here if you want your kernel to support the Cirrus |
| Logic EDB9315A Evaluation Board. |
| |
| config MACH_GESBC9312 |
| depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET |
| bool "Support Glomation GESBC-9312-sx" |
| help |
| Say 'Y' here if you want your kernel to support the Glomation |
| GESBC-9312-sx board. |
| |
| config MACH_MICRO9 |
| bool |
| |
| config MACH_MICRO9H |
| bool "Support Contec Micro9-High" |
| depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET |
| select MACH_MICRO9 |
| help |
| Say 'Y' here if you want your kernel to support the |
| Contec Micro9-High board. |
| |
| config MACH_MICRO9M |
| bool "Support Contec Micro9-Mid" |
| depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET |
| select MACH_MICRO9 |
| help |
| Say 'Y' here if you want your kernel to support the |
| Contec Micro9-Mid board. |
| |
| config MACH_MICRO9L |
| bool "Support Contec Micro9-Lite" |
| depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET |
| select MACH_MICRO9 |
| help |
| Say 'Y' here if you want your kernel to support the |
| Contec Micro9-Lite board. |
| |
| config MACH_MICRO9S |
| bool "Support Contec Micro9-Slim" |
| depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET |
| select MACH_MICRO9 |
| help |
| Say 'Y' here if you want your kernel to support the |
| Contec Micro9-Slim board. |
| |
| config MACH_SIM_ONE |
| bool "Support Simplemachines Sim.One board" |
| depends on EP93XX_SDCE0_PHYS_OFFSET |
| help |
| Say 'Y' here if you want your kernel to support the |
| Simplemachines Sim.One board. |
| |
| config MACH_SNAPPER_CL15 |
| bool "Support Bluewater Systems Snapper CL15 Module" |
| depends on EP93XX_SDCE0_PHYS_OFFSET |
| help |
| Say 'Y' here if you want your kernel to support the Bluewater |
| Systems Snapper CL15 Module. |
| |
| config MACH_TS72XX |
| bool "Support Technologic Systems TS-72xx SBC" |
| depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET |
| help |
| Say 'Y' here if you want your kernel to support the |
| Technologic Systems TS-72xx board. |
| |
| config MACH_VISION_EP9307 |
| bool "Support Vision Engraving Systems EP9307 SoM" |
| depends on EP93XX_SDCE0_PHYS_OFFSET |
| help |
| Say 'Y' here if you want your kernel to support the |
| Vision Engraving Systems EP9307 SoM. |
| |
| endmenu |
| |
| endif |
