| #ifndef __LINUX_SERIAL_SCI_H |
| #define __LINUX_SERIAL_SCI_H |
| |
| #include <linux/serial_core.h> |
| #include <linux/sh_dma.h> |
| |
| /* |
| * Generic header for SuperH (H)SCI(F) (used by sh/sh64 and related parts) |
| */ |
| |
| #define SCIx_NOT_SUPPORTED (-1) |
| |
| #define SCSCR_TIE (1 << 7) |
| #define SCSCR_RIE (1 << 6) |
| #define SCSCR_TE (1 << 5) |
| #define SCSCR_RE (1 << 4) |
| #define SCSCR_REIE (1 << 3) /* not supported by all parts */ |
| #define SCSCR_TOIE (1 << 2) /* not supported by all parts */ |
| #define SCSCR_CKE1 (1 << 1) |
| #define SCSCR_CKE0 (1 << 0) |
| |
| /* SCxSR SCI */ |
| #define SCI_TDRE 0x80 |
| #define SCI_RDRF 0x40 |
| #define SCI_ORER 0x20 |
| #define SCI_FER 0x10 |
| #define SCI_PER 0x08 |
| #define SCI_TEND 0x04 |
| |
| #define SCI_DEFAULT_ERROR_MASK (SCI_PER | SCI_FER) |
| |
| /* SCxSR SCIF, HSCIF */ |
| #define SCIF_ER 0x0080 |
| #define SCIF_TEND 0x0040 |
| #define SCIF_TDFE 0x0020 |
| #define SCIF_BRK 0x0010 |
| #define SCIF_FER 0x0008 |
| #define SCIF_PER 0x0004 |
| #define SCIF_RDF 0x0002 |
| #define SCIF_DR 0x0001 |
| |
| #define SCIF_DEFAULT_ERROR_MASK (SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK) |
| |
| /* SCSPTR, optional */ |
| #define SCSPTR_RTSIO (1 << 7) |
| #define SCSPTR_CTSIO (1 << 5) |
| #define SCSPTR_SPB2IO (1 << 1) |
| #define SCSPTR_SPB2DT (1 << 0) |
| |
| /* HSSRR HSCIF */ |
| #define HSCIF_SRE 0x8000 |
| |
| enum { |
| SCIx_PROBE_REGTYPE, |
| |
| SCIx_SCI_REGTYPE, |
| SCIx_IRDA_REGTYPE, |
| SCIx_SCIFA_REGTYPE, |
| SCIx_SCIFB_REGTYPE, |
| SCIx_SH2_SCIF_FIFODATA_REGTYPE, |
| SCIx_SH3_SCIF_REGTYPE, |
| SCIx_SH4_SCIF_REGTYPE, |
| SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE, |
| SCIx_SH4_SCIF_FIFODATA_REGTYPE, |
| SCIx_SH7705_SCIF_REGTYPE, |
| SCIx_HSCIF_REGTYPE, |
| |
| SCIx_NR_REGTYPES, |
| }; |
| |
| /* |
| * SCI register subset common for all port types. |
| * Not all registers will exist on all parts. |
| */ |
| enum { |
| SCSMR, SCBRR, SCSCR, SCxSR, |
| SCFCR, SCFDR, SCxTDR, SCxRDR, |
| SCLSR, SCTFDR, SCRFDR, SCSPTR, |
| HSSRR, |
| |
| SCIx_NR_REGS, |
| }; |
| |
| struct device; |
| |
| struct plat_sci_port_ops { |
| void (*init_pins)(struct uart_port *, unsigned int cflag); |
| }; |
| |
| /* |
| * Port-specific capabilities |
| */ |
| #define SCIx_HAVE_RTSCTS (1 << 0) |
| |
| /* |
| * Platform device specific platform_data struct |
| */ |
| struct plat_sci_port { |
| unsigned int type; /* SCI / SCIF / IRDA / HSCIF */ |
| upf_t flags; /* UPF_* flags */ |
| unsigned long capabilities; /* Port features/capabilities */ |
| |
| unsigned int sampling_rate; |
| unsigned int scscr; /* SCSCR initialization */ |
| |
| /* |
| * Platform overrides if necessary, defaults otherwise. |
| */ |
| int port_reg; |
| unsigned char regshift; |
| unsigned char regtype; |
| |
| struct plat_sci_port_ops *ops; |
| |
| unsigned int dma_slave_tx; |
| unsigned int dma_slave_rx; |
| }; |
| |
| #endif /* __LINUX_SERIAL_SCI_H */ |