arch/powerpc/boot/dts/p1020rdb-pd.dts - kernel/lockdown - Git at Google

 /*
  * P1020 RDB-PD Device Tree Source (32-bit address map)
  *
  * Copyright 2013 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
  *     * Redistributions of source code must retain the above copyright
  *       notice, this list of conditions and the following disclaimer.
  *     * Redistributions in binary form must reproduce the above copyright
  *       notice, this list of conditions and the following disclaimer in the
  *       documentation and/or other materials provided with the distribution.
  *     * Neither the name of Freescale Semiconductor nor the
  *       names of its contributors may be used to endorse or promote products
  *       derived from this software without specific prior written permission.
  *
  *
  * ALTERNATIVELY, this software may be distributed under the terms of the
  * GNU General Public License ("GPL") as published by the Free Software
  * Foundation, either version 2 of that License or (at your option) any
  * later version.
  *
  * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */

 /include/ "fsl/p1020si-pre.dtsi"
 / {
 	model = "fsl,P1020RDB-PD";
 	compatible = "fsl,P1020RDB-PD";

 	memory {
 		device_type = "memory";
 	};

 	lbc: localbus@ffe05000 {
 		reg = <0x0 0xffe05000 0x0 0x1000>;

 		/* NOR, NAND flash, L2 switch and CPLD */
 		ranges = <0x0 0x0 0x0 0xec000000 0x04000000
 			  0x1 0x0 0x0 0xff800000 0x00040000
 			  0x2 0x0 0x0 0xffa00000 0x00020000
 			  0x3 0x0 0x0 0xffb00000 0x00020000>;

 		nor@0,0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "cfi-flash";
 			reg = <0x0 0x0 0x4000000>;
 			bank-width = <2>;
 			device-width = <1>;

 			partition@0 {
 				/* 128KB for DTB Image */
 				reg = <0x0 0x00020000>;
 				label = "NOR DTB Image";
 			};

 			partition@20000 {
 				/* 3.875 MB for Linux Kernel Image */
 				reg = <0x00020000 0x003e0000>;
 				label = "NOR Linux Kernel Image";
 			};

 			partition@400000 {
 				/* 58MB for Root file System */
 				reg = <0x00400000 0x03a00000>;
 				label = "NOR Root File System";
 			};

 			partition@3e00000 {
 				/* This location must not be altered  */
 				/* 1M for Vitesse 7385 Switch firmware */
 				reg = <0x3e00000 0x00100000>;
 				label = "NOR Vitesse-7385 Firmware";
 				read-only;
 			};

 			partition@3f00000 {
 				/* This location must not be altered  */
 				/* 512KB for u-boot Bootloader Image */
 				/* 512KB for u-boot Environment Variables */
 				reg = <0x03f00000 0x00100000>;
 				label = "NOR U-Boot Image";
 				read-only;
 			};
 		};

 		nand@1,0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "fsl,p1020-fcm-nand",
 				     "fsl,elbc-fcm-nand";
 			reg = <0x1 0x0 0x40000>;

 			partition@0 {
 				/* This location must not be altered  */
 				/* 1MB for u-boot Bootloader Image */
 				reg = <0x0 0x00100000>;
 				label = "NAND U-Boot Image";
 				read-only;
 			};

 			partition@100000 {
 				/* 1MB for DTB Image */
 				reg = <0x00100000 0x00100000>;
 				label = "NAND DTB Image";
 			};

 			partition@200000 {
 				/* 4MB for Linux Kernel Image */
 				reg = <0x00200000 0x00400000>;
 				label = "NAND Linux Kernel Image";
 			};

 			partition@600000 {
 				/* 122MB for File System Image */
 				reg = <0x00600000 0x07a00000>;
 				label = "NAND File System Image";
 			};
 		};

 		cpld@2,0 {
 			compatible = "fsl,p1020rdb-pd-cpld";
 			reg = <0x2 0x0 0x20000>;
 		};

 		L2switch@3,0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "vitesse-7385";
 			reg = <0x3 0x0 0x20000>;
 		};
 	};

 	soc: soc@ffe00000 {
 		ranges = <0x0 0x0 0xffe00000 0x100000>;

 		i2c@3000 {
 			rtc@68 {
 				compatible = "dallas,ds1339";
 				reg = <0x68>;
 			};
 		};

 		spi@7000 {
 			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "spansion,s25sl12801";
 				reg = <0>;
 				/* input clock */
 				spi-max-frequency = <40000000>;

 				partition@0 {
 					/* 512KB for u-boot Bootloader Image */
 					reg = <0x0 0x00080000>;
 					label = "SPI U-Boot Image";
 					read-only;
 				};

 				partition@80000 {
 					/* 512KB for DTB Image*/
 					reg = <0x00080000 0x00080000>;
 					label = "SPI DTB Image";
 				};

 				partition@100000 {
 					/* 4MB for Linux Kernel Image */
 					reg = <0x00100000 0x00400000>;
 					label = "SPI Linux Kernel Image";
 				};

 				partition@500000 {
 					/* 11MB for FS System Image */
 					reg = <0x00500000 0x00b00000>;
 					label = "SPI File System Image";
 				};
 			};

 			slic@0 {
 				compatible = "zarlink,le88266";
 				reg = <1>;
 				spi-max-frequency = <8000000>;
 			};

 			slic@1 {
 				compatible = "zarlink,le88266";
 				reg = <2>;
 				spi-max-frequency = <8000000>;
 			};
 		};

 		mdio@24000 {
 			phy0: ethernet-phy@0 {
 				interrupts = <3 1 0 0>;
 				reg = <0x0>;
 			};

 			phy1: ethernet-phy@1 {
 				interrupts = <2 1 0 0>;
 				reg = <0x1>;
 			};
 		};

 		mdio@25000 {
 			tbi1: tbi-phy@11 {
 				reg = <0x11>;
 				device_type = "tbi-phy";
 			};
 		};

 		mdio@26000 {
 			tbi2: tbi-phy@11 {
 				reg = <0x11>;
 				device_type = "tbi-phy";
 			};
 		};

 		enet0: ethernet@b0000 {
 			fixed-link = <1 1 1000 0 0>;
 			phy-connection-type = "rgmii-id";
 		};

 		enet1: ethernet@b1000 {
 			phy-handle = <&phy0>;
 			tbi-handle = <&tbi1>;
 			phy-connection-type = "sgmii";
 		};

 		enet2: ethernet@b2000 {
 			phy-handle = <&phy1>;
 			phy-connection-type = "rgmii-id";
 		};

 		usb@22000 {
 			phy_type = "ulpi";
 		};
 	};

 	pci0: pcie@ffe09000 {
 		reg = <0x0 0xffe09000 0x0 0x1000>;
 		ranges = <0x2000000 0x0 0xa0000000 0x0 0xa0000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0x0 0xffc10000 0x0 0x10000>;
 		pcie@0 {
 			ranges = <0x2000000 0x0 0xa0000000
 				  0x2000000 0x0 0xa0000000
 				  0x0 0x20000000

 				  0x1000000 0x0 0x0
 				  0x1000000 0x0 0x0
 				  0x0 0x100000>;
 		};
 	};

 	pci1: pcie@ffe0a000 {
 		reg = <0x0 0xffe0a000 0x0 0x1000>;
 		ranges = <0x2000000 0x0 0x80000000 0x0 0x80000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0x0 0xffc00000 0x0 0x10000>;
 		pcie@0 {
 			ranges = <0x2000000 0x0 0x80000000
 				  0x2000000 0x0 0x80000000
 				  0x0 0x20000000

 				  0x1000000 0x0 0x0
 				  0x1000000 0x0 0x0
 				  0x0 0x100000>;
 		};
 	};
 };

 /include/ "fsl/p1020si-post.dtsi"
	/*
	* P1020 RDB-PD Device Tree Source (32-bit address map)
	*
	* Copyright 2013 Freescale Semiconductor Inc.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are met:
	* * Redistributions of source code must retain the above copyright
	* notice, this list of conditions and the following disclaimer.
	* * Redistributions in binary form must reproduce the above copyright
	* notice, this list of conditions and the following disclaimer in the
	* documentation and/or other materials provided with the distribution.
	* * Neither the name of Freescale Semiconductor nor the
	* names of its contributors may be used to endorse or promote products
	* derived from this software without specific prior written permission.
	*
	*
	* ALTERNATIVELY, this software may be distributed under the terms of the
	* GNU General Public License ("GPL") as published by the Free Software
	* Foundation, either version 2 of that License or (at your option) any
	* later version.
	*
	* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
	* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
	* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
	* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
	* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
	* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
	* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
	* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
	* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	*/

	/include/ "fsl/p1020si-pre.dtsi"
	/ {
	model = "fsl,P1020RDB-PD";
	compatible = "fsl,P1020RDB-PD";

	memory {
	device_type = "memory";
	};

	lbc: localbus@ffe05000 {
	reg = <0x0 0xffe05000 0x0 0x1000>;

	/* NOR, NAND flash, L2 switch and CPLD */
	ranges = <0x0 0x0 0x0 0xec000000 0x04000000
	0x1 0x0 0x0 0xff800000 0x00040000
	0x2 0x0 0x0 0xffa00000 0x00020000
	0x3 0x0 0x0 0xffb00000 0x00020000>;

	nor@0,0 {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "cfi-flash";
	reg = <0x0 0x0 0x4000000>;
	bank-width = <2>;
	device-width = <1>;

	partition@0 {
	/* 128KB for DTB Image */
	reg = <0x0 0x00020000>;
	label = "NOR DTB Image";
	};

	partition@20000 {
	/* 3.875 MB for Linux Kernel Image */
	reg = <0x00020000 0x003e0000>;
	label = "NOR Linux Kernel Image";
	};

	partition@400000 {
	/* 58MB for Root file System */
	reg = <0x00400000 0x03a00000>;
	label = "NOR Root File System";
	};

	partition@3e00000 {
	/* This location must not be altered */
	/* 1M for Vitesse 7385 Switch firmware */
	reg = <0x3e00000 0x00100000>;
	label = "NOR Vitesse-7385 Firmware";
	read-only;
	};

	partition@3f00000 {
	/* This location must not be altered */
	/* 512KB for u-boot Bootloader Image */
	/* 512KB for u-boot Environment Variables */
	reg = <0x03f00000 0x00100000>;
	label = "NOR U-Boot Image";
	read-only;
	};
	};

	nand@1,0 {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "fsl,p1020-fcm-nand",
	"fsl,elbc-fcm-nand";
	reg = <0x1 0x0 0x40000>;

	partition@0 {
	/* This location must not be altered */
	/* 1MB for u-boot Bootloader Image */
	reg = <0x0 0x00100000>;
	label = "NAND U-Boot Image";
	read-only;
	};

	partition@100000 {
	/* 1MB for DTB Image */
	reg = <0x00100000 0x00100000>;
	label = "NAND DTB Image";
	};

	partition@200000 {
	/* 4MB for Linux Kernel Image */
	reg = <0x00200000 0x00400000>;
	label = "NAND Linux Kernel Image";
	};

	partition@600000 {
	/* 122MB for File System Image */
	reg = <0x00600000 0x07a00000>;
	label = "NAND File System Image";
	};
	};

	cpld@2,0 {
	compatible = "fsl,p1020rdb-pd-cpld";
	reg = <0x2 0x0 0x20000>;
	};

	L2switch@3,0 {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "vitesse-7385";
	reg = <0x3 0x0 0x20000>;
	};
	};

	soc: soc@ffe00000 {
	ranges = <0x0 0x0 0xffe00000 0x100000>;

	i2c@3000 {
	rtc@68 {
	compatible = "dallas,ds1339";
	reg = <0x68>;
	};
	};

	spi@7000 {
	flash@0 {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "spansion,s25sl12801";
	reg = <0>;
	/* input clock */
	spi-max-frequency = <40000000>;

	partition@0 {
	/* 512KB for u-boot Bootloader Image */
	reg = <0x0 0x00080000>;
	label = "SPI U-Boot Image";
	read-only;
	};

	partition@80000 {
	/* 512KB for DTB Image*/
	reg = <0x00080000 0x00080000>;
	label = "SPI DTB Image";
	};

	partition@100000 {
	/* 4MB for Linux Kernel Image */
	reg = <0x00100000 0x00400000>;
	label = "SPI Linux Kernel Image";
	};

	partition@500000 {
	/* 11MB for FS System Image */
	reg = <0x00500000 0x00b00000>;
	label = "SPI File System Image";
	};
	};

	slic@0 {
	compatible = "zarlink,le88266";
	reg = <1>;
	spi-max-frequency = <8000000>;
	};

	slic@1 {
	compatible = "zarlink,le88266";
	reg = <2>;
	spi-max-frequency = <8000000>;
	};
	};

	mdio@24000 {
	phy0: ethernet-phy@0 {
	interrupts = <3 1 0 0>;
	reg = <0x0>;
	};

	phy1: ethernet-phy@1 {
	interrupts = <2 1 0 0>;
	reg = <0x1>;
	};
	};

	mdio@25000 {
	tbi1: tbi-phy@11 {
	reg = <0x11>;
	device_type = "tbi-phy";
	};
	};

	mdio@26000 {
	tbi2: tbi-phy@11 {
	reg = <0x11>;
	device_type = "tbi-phy";
	};
	};

	enet0: ethernet@b0000 {
	fixed-link = <1 1 1000 0 0>;
	phy-connection-type = "rgmii-id";
	};

	enet1: ethernet@b1000 {
	phy-handle = <&phy0>;
	tbi-handle = <&tbi1>;
	phy-connection-type = "sgmii";
	};

	enet2: ethernet@b2000 {
	phy-handle = <&phy1>;
	phy-connection-type = "rgmii-id";
	};

	usb@22000 {
	phy_type = "ulpi";
	};
	};

	pci0: pcie@ffe09000 {
	reg = <0x0 0xffe09000 0x0 0x1000>;
	ranges = <0x2000000 0x0 0xa0000000 0x0 0xa0000000 0x0 0x20000000
	0x1000000 0x0 0x00000000 0x0 0xffc10000 0x0 0x10000>;
	pcie@0 {
	ranges = <0x2000000 0x0 0xa0000000
	0x2000000 0x0 0xa0000000
	0x0 0x20000000

	0x1000000 0x0 0x0
	0x1000000 0x0 0x0
	0x0 0x100000>;
	};
	};

	pci1: pcie@ffe0a000 {
	reg = <0x0 0xffe0a000 0x0 0x1000>;
	ranges = <0x2000000 0x0 0x80000000 0x0 0x80000000 0x0 0x20000000
	0x1000000 0x0 0x00000000 0x0 0xffc00000 0x0 0x10000>;
	pcie@0 {
	ranges = <0x2000000 0x0 0x80000000
	0x2000000 0x0 0x80000000
	0x0 0x20000000

	0x1000000 0x0 0x0
	0x1000000 0x0 0x0
	0x0 0x100000>;
	};
	};
	};

	/include/ "fsl/p1020si-post.dtsi"