blob: 4ae8b10746496e00d4e0396c896583b6bf0cf084 [file] [log] [blame]
/*
* Driver for the Auvitek USB bridge
*
* Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
*
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/suspend.h>
#include <media/v4l2-common.h>
#include <media/tuner.h>
#include "au0828.h"
#include "au8522.h"
#include "xc5000.h"
#include "mxl5007t.h"
#include "tda18271.h"
static int preallocate_big_buffers;
module_param_named(preallocate_big_buffers, preallocate_big_buffers, int, 0644);
MODULE_PARM_DESC(preallocate_big_buffers, "Preallocate the larger transfer buffers at module load time");
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
#define _AU0828_BULKPIPE 0x83
#define _BULKPIPESIZE 0xe522
static u8 hauppauge_hvr950q_led_states[] = {
0x00, /* off */
0x02, /* yellow */
0x04, /* green */
};
static struct au8522_led_config hauppauge_hvr950q_led_cfg = {
.gpio_output = 0x00e0,
.gpio_output_enable = 0x6006,
.gpio_output_disable = 0x0660,
.gpio_leds = 0x00e2,
.led_states = hauppauge_hvr950q_led_states,
.num_led_states = sizeof(hauppauge_hvr950q_led_states),
.vsb8_strong = 20 /* dB */ * 10,
.qam64_strong = 25 /* dB */ * 10,
.qam256_strong = 32 /* dB */ * 10,
};
static struct au8522_config hauppauge_hvr950q_config = {
.demod_address = 0x8e >> 1,
.status_mode = AU8522_DEMODLOCKING,
.qam_if = AU8522_IF_6MHZ,
.vsb_if = AU8522_IF_6MHZ,
.led_cfg = &hauppauge_hvr950q_led_cfg,
};
static struct au8522_config fusionhdtv7usb_config = {
.demod_address = 0x8e >> 1,
.status_mode = AU8522_DEMODLOCKING,
.qam_if = AU8522_IF_6MHZ,
.vsb_if = AU8522_IF_6MHZ,
};
static struct au8522_config hauppauge_woodbury_config = {
.demod_address = 0x8e >> 1,
.status_mode = AU8522_DEMODLOCKING,
.qam_if = AU8522_IF_4MHZ,
.vsb_if = AU8522_IF_3_25MHZ,
};
static struct xc5000_config hauppauge_xc5000a_config = {
.i2c_address = 0x61,
.if_khz = 6000,
.chip_id = XC5000A,
};
static struct xc5000_config hauppauge_xc5000c_config = {
.i2c_address = 0x61,
.if_khz = 6000,
.chip_id = XC5000C,
};
static struct mxl5007t_config mxl5007t_hvr950q_config = {
.xtal_freq_hz = MxL_XTAL_24_MHZ,
.if_freq_hz = MxL_IF_6_MHZ,
};
static struct tda18271_config hauppauge_woodbury_tunerconfig = {
.gate = TDA18271_GATE_DIGITAL,
};
static void au0828_restart_dvb_streaming(struct work_struct *work);
/*-------------------------------------------------------------------*/
static void urb_completion(struct urb *purb)
{
struct au0828_dev *dev = purb->context;
int ptype = usb_pipetype(purb->pipe);
unsigned char *ptr;
dprintk(2, "%s()\n", __func__);
if (!dev)
return;
if (dev->urb_streaming == 0)
return;
if (ptype != PIPE_BULK) {
printk(KERN_ERR "%s() Unsupported URB type %d\n",
__func__, ptype);
return;
}
/* See if the stream is corrupted (to work around a hardware
bug where the stream gets misaligned */
ptr = purb->transfer_buffer;
if (purb->actual_length > 0 && ptr[0] != 0x47) {
dprintk(1, "Need to restart streaming %02x len=%d!\n",
ptr[0], purb->actual_length);
schedule_work(&dev->restart_streaming);
return;
}
/* Feed the transport payload into the kernel demux */
dvb_dmx_swfilter_packets(&dev->dvb.demux,
purb->transfer_buffer, purb->actual_length / 188);
/* Clean the buffer before we requeue */
memset(purb->transfer_buffer, 0, URB_BUFSIZE);
/* Requeue URB */
usb_submit_urb(purb, GFP_ATOMIC);
}
static int stop_urb_transfer(struct au0828_dev *dev)
{
int i;
dprintk(2, "%s()\n", __func__);
dev->urb_streaming = 0;
for (i = 0; i < URB_COUNT; i++) {
if (dev->urbs[i]) {
usb_kill_urb(dev->urbs[i]);
if (!preallocate_big_buffers)
kfree(dev->urbs[i]->transfer_buffer);
usb_free_urb(dev->urbs[i]);
}
}
return 0;
}
static int start_urb_transfer(struct au0828_dev *dev)
{
struct urb *purb;
int i, ret = -ENOMEM;
dprintk(2, "%s()\n", __func__);
if (dev->urb_streaming) {
dprintk(2, "%s: bulk xfer already running!\n", __func__);
return 0;
}
for (i = 0; i < URB_COUNT; i++) {
dev->urbs[i] = usb_alloc_urb(0, GFP_KERNEL);
if (!dev->urbs[i])
goto err;
purb = dev->urbs[i];
if (preallocate_big_buffers)
purb->transfer_buffer = dev->dig_transfer_buffer[i];
else
purb->transfer_buffer = kzalloc(URB_BUFSIZE,
GFP_KERNEL);
if (!purb->transfer_buffer) {
usb_free_urb(purb);
dev->urbs[i] = NULL;
printk(KERN_ERR
"%s: failed big buffer allocation, err = %d\n",
__func__, ret);
goto err;
}
purb->status = -EINPROGRESS;
usb_fill_bulk_urb(purb,
dev->usbdev,
usb_rcvbulkpipe(dev->usbdev,
_AU0828_BULKPIPE),
purb->transfer_buffer,
URB_BUFSIZE,
urb_completion,
dev);
}
for (i = 0; i < URB_COUNT; i++) {
ret = usb_submit_urb(dev->urbs[i], GFP_ATOMIC);
if (ret != 0) {
stop_urb_transfer(dev);
printk(KERN_ERR "%s: failed urb submission, "
"err = %d\n", __func__, ret);
return ret;
}
}
dev->urb_streaming = 1;
ret = 0;
err:
return ret;
}
static void au0828_start_transport(struct au0828_dev *dev)
{
au0828_write(dev, 0x608, 0x90);
au0828_write(dev, 0x609, 0x72);
au0828_write(dev, 0x60a, 0x71);
au0828_write(dev, 0x60b, 0x01);
}
static void au0828_stop_transport(struct au0828_dev *dev, int full_stop)
{
if (full_stop) {
au0828_write(dev, 0x608, 0x00);
au0828_write(dev, 0x609, 0x00);
au0828_write(dev, 0x60a, 0x00);
}
au0828_write(dev, 0x60b, 0x00);
}
static int au0828_dvb_start_feed(struct dvb_demux_feed *feed)
{
struct dvb_demux *demux = feed->demux;
struct au0828_dev *dev = (struct au0828_dev *) demux->priv;
struct au0828_dvb *dvb = &dev->dvb;
int ret = 0;
dprintk(1, "%s()\n", __func__);
if (!demux->dmx.frontend)
return -EINVAL;
if (dvb) {
mutex_lock(&dvb->lock);
dvb->start_count++;
dprintk(1, "%s(), start_count: %d, stop_count: %d\n", __func__,
dvb->start_count, dvb->stop_count);
if (dvb->feeding++ == 0) {
/* Start transport */
au0828_start_transport(dev);
ret = start_urb_transfer(dev);
if (ret < 0) {
au0828_stop_transport(dev, 0);
dvb->feeding--; /* We ran out of memory... */
}
}
mutex_unlock(&dvb->lock);
}
return ret;
}
static int au0828_dvb_stop_feed(struct dvb_demux_feed *feed)
{
struct dvb_demux *demux = feed->demux;
struct au0828_dev *dev = (struct au0828_dev *) demux->priv;
struct au0828_dvb *dvb = &dev->dvb;
int ret = 0;
dprintk(1, "%s()\n", __func__);
if (dvb) {
mutex_lock(&dvb->lock);
dvb->stop_count++;
dprintk(1, "%s(), start_count: %d, stop_count: %d\n", __func__,
dvb->start_count, dvb->stop_count);
if (dvb->feeding > 0) {
dvb->feeding--;
if (dvb->feeding == 0) {
/* Stop transport */
ret = stop_urb_transfer(dev);
au0828_stop_transport(dev, 0);
}
}
mutex_unlock(&dvb->lock);
}
return ret;
}
static void au0828_restart_dvb_streaming(struct work_struct *work)
{
struct au0828_dev *dev = container_of(work, struct au0828_dev,
restart_streaming);
struct au0828_dvb *dvb = &dev->dvb;
if (dev->urb_streaming == 0)
return;
dprintk(1, "Restarting streaming...!\n");
mutex_lock(&dvb->lock);
/* Stop transport */
stop_urb_transfer(dev);
au0828_stop_transport(dev, 1);
/* Start transport */
au0828_start_transport(dev);
start_urb_transfer(dev);
mutex_unlock(&dvb->lock);
}
static int dvb_register(struct au0828_dev *dev)
{
struct au0828_dvb *dvb = &dev->dvb;
int result;
dprintk(1, "%s()\n", __func__);
if (preallocate_big_buffers) {
int i;
for (i = 0; i < URB_COUNT; i++) {
dev->dig_transfer_buffer[i] = kzalloc(URB_BUFSIZE,
GFP_KERNEL);
if (!dev->dig_transfer_buffer[i]) {
result = -ENOMEM;
printk(KERN_ERR
"%s: failed buffer allocation (errno = %d)\n",
DRIVER_NAME, result);
goto fail_adapter;
}
}
}
INIT_WORK(&dev->restart_streaming, au0828_restart_dvb_streaming);
/* register adapter */
result = dvb_register_adapter(&dvb->adapter, DRIVER_NAME, THIS_MODULE,
&dev->usbdev->dev, adapter_nr);
if (result < 0) {
printk(KERN_ERR "%s: dvb_register_adapter failed "
"(errno = %d)\n", DRIVER_NAME, result);
goto fail_adapter;
}
dvb->adapter.priv = dev;
/* register frontend */
result = dvb_register_frontend(&dvb->adapter, dvb->frontend);
if (result < 0) {
printk(KERN_ERR "%s: dvb_register_frontend failed "
"(errno = %d)\n", DRIVER_NAME, result);
goto fail_frontend;
}
/* register demux stuff */
dvb->demux.dmx.capabilities =
DMX_TS_FILTERING | DMX_SECTION_FILTERING |
DMX_MEMORY_BASED_FILTERING;
dvb->demux.priv = dev;
dvb->demux.filternum = 256;
dvb->demux.feednum = 256;
dvb->demux.start_feed = au0828_dvb_start_feed;
dvb->demux.stop_feed = au0828_dvb_stop_feed;
result = dvb_dmx_init(&dvb->demux);
if (result < 0) {
printk(KERN_ERR "%s: dvb_dmx_init failed (errno = %d)\n",
DRIVER_NAME, result);
goto fail_dmx;
}
dvb->dmxdev.filternum = 256;
dvb->dmxdev.demux = &dvb->demux.dmx;
dvb->dmxdev.capabilities = 0;
result = dvb_dmxdev_init(&dvb->dmxdev, &dvb->adapter);
if (result < 0) {
printk(KERN_ERR "%s: dvb_dmxdev_init failed (errno = %d)\n",
DRIVER_NAME, result);
goto fail_dmxdev;
}
dvb->fe_hw.source = DMX_FRONTEND_0;
result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_hw);
if (result < 0) {
printk(KERN_ERR "%s: add_frontend failed "
"(DMX_FRONTEND_0, errno = %d)\n", DRIVER_NAME, result);
goto fail_fe_hw;
}
dvb->fe_mem.source = DMX_MEMORY_FE;
result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_mem);
if (result < 0) {
printk(KERN_ERR "%s: add_frontend failed "
"(DMX_MEMORY_FE, errno = %d)\n", DRIVER_NAME, result);
goto fail_fe_mem;
}
result = dvb->demux.dmx.connect_frontend(&dvb->demux.dmx, &dvb->fe_hw);
if (result < 0) {
printk(KERN_ERR "%s: connect_frontend failed (errno = %d)\n",
DRIVER_NAME, result);
goto fail_fe_conn;
}
/* register network adapter */
dvb_net_init(&dvb->adapter, &dvb->net, &dvb->demux.dmx);
dvb->start_count = 0;
dvb->stop_count = 0;
return 0;
fail_fe_conn:
dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem);
fail_fe_mem:
dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw);
fail_fe_hw:
dvb_dmxdev_release(&dvb->dmxdev);
fail_dmxdev:
dvb_dmx_release(&dvb->demux);
fail_dmx:
dvb_unregister_frontend(dvb->frontend);
fail_frontend:
dvb_frontend_detach(dvb->frontend);
dvb_unregister_adapter(&dvb->adapter);
fail_adapter:
if (preallocate_big_buffers) {
int i;
for (i = 0; i < URB_COUNT; i++)
kfree(dev->dig_transfer_buffer[i]);
}
return result;
}
void au0828_dvb_unregister(struct au0828_dev *dev)
{
struct au0828_dvb *dvb = &dev->dvb;
dprintk(1, "%s()\n", __func__);
if (dvb->frontend == NULL)
return;
dvb_net_release(&dvb->net);
dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem);
dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw);
dvb_dmxdev_release(&dvb->dmxdev);
dvb_dmx_release(&dvb->demux);
dvb_unregister_frontend(dvb->frontend);
dvb_frontend_detach(dvb->frontend);
dvb_unregister_adapter(&dvb->adapter);
if (preallocate_big_buffers) {
int i;
for (i = 0; i < URB_COUNT; i++)
kfree(dev->dig_transfer_buffer[i]);
}
}
/* All the DVB attach calls go here, this function get's modified
* for each new card. No other function in this file needs
* to change.
*/
int au0828_dvb_register(struct au0828_dev *dev)
{
struct au0828_dvb *dvb = &dev->dvb;
int ret;
dprintk(1, "%s()\n", __func__);
/* init frontend */
switch (dev->boardnr) {
case AU0828_BOARD_HAUPPAUGE_HVR850:
case AU0828_BOARD_HAUPPAUGE_HVR950Q:
dvb->frontend = dvb_attach(au8522_attach,
&hauppauge_hvr950q_config,
&dev->i2c_adap);
if (dvb->frontend != NULL)
switch (dev->board.tuner_type) {
default:
case TUNER_XC5000:
dvb_attach(xc5000_attach, dvb->frontend,
&dev->i2c_adap,
&hauppauge_xc5000a_config);
break;
case TUNER_XC5000C:
dvb_attach(xc5000_attach, dvb->frontend,
&dev->i2c_adap,
&hauppauge_xc5000c_config);
break;
}
break;
case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL:
dvb->frontend = dvb_attach(au8522_attach,
&hauppauge_hvr950q_config,
&dev->i2c_adap);
if (dvb->frontend != NULL)
dvb_attach(mxl5007t_attach, dvb->frontend,
&dev->i2c_adap, 0x60,
&mxl5007t_hvr950q_config);
break;
case AU0828_BOARD_HAUPPAUGE_WOODBURY:
dvb->frontend = dvb_attach(au8522_attach,
&hauppauge_woodbury_config,
&dev->i2c_adap);
if (dvb->frontend != NULL)
dvb_attach(tda18271_attach, dvb->frontend,
0x60, &dev->i2c_adap,
&hauppauge_woodbury_tunerconfig);
break;
case AU0828_BOARD_DVICO_FUSIONHDTV7:
dvb->frontend = dvb_attach(au8522_attach,
&fusionhdtv7usb_config,
&dev->i2c_adap);
if (dvb->frontend != NULL) {
dvb_attach(xc5000_attach, dvb->frontend,
&dev->i2c_adap,
&hauppauge_xc5000a_config);
}
break;
default:
printk(KERN_WARNING "The frontend of your DVB/ATSC card "
"isn't supported yet\n");
break;
}
if (NULL == dvb->frontend) {
printk(KERN_ERR "%s() Frontend initialization failed\n",
__func__);
return -1;
}
/* define general-purpose callback pointer */
dvb->frontend->callback = au0828_tuner_callback;
/* register everything */
ret = dvb_register(dev);
if (ret < 0) {
if (dvb->frontend->ops.release)
dvb->frontend->ops.release(dvb->frontend);
return ret;
}
return 0;
}