| /* |
| * I2C bus driver for CSR SiRFprimaII |
| * |
| * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. |
| * |
| * Licensed under GPLv2 or later. |
| */ |
| |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/platform_device.h> |
| #include <linux/i2c.h> |
| #include <linux/clk.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| |
| #define SIRFSOC_I2C_CLK_CTRL 0x00 |
| #define SIRFSOC_I2C_STATUS 0x0C |
| #define SIRFSOC_I2C_CTRL 0x10 |
| #define SIRFSOC_I2C_IO_CTRL 0x14 |
| #define SIRFSOC_I2C_SDA_DELAY 0x18 |
| #define SIRFSOC_I2C_CMD_START 0x1C |
| #define SIRFSOC_I2C_CMD_BUF 0x30 |
| #define SIRFSOC_I2C_DATA_BUF 0x80 |
| |
| #define SIRFSOC_I2C_CMD_BUF_MAX 16 |
| #define SIRFSOC_I2C_DATA_BUF_MAX 16 |
| |
| #define SIRFSOC_I2C_CMD(x) (SIRFSOC_I2C_CMD_BUF + (x)*0x04) |
| #define SIRFSOC_I2C_DATA_MASK(x) (0xFF<<(((x)&3)*8)) |
| #define SIRFSOC_I2C_DATA_SHIFT(x) (((x)&3)*8) |
| |
| #define SIRFSOC_I2C_DIV_MASK (0xFFFF) |
| |
| /* I2C status flags */ |
| #define SIRFSOC_I2C_STAT_BUSY BIT(0) |
| #define SIRFSOC_I2C_STAT_TIP BIT(1) |
| #define SIRFSOC_I2C_STAT_NACK BIT(2) |
| #define SIRFSOC_I2C_STAT_TR_INT BIT(4) |
| #define SIRFSOC_I2C_STAT_STOP BIT(6) |
| #define SIRFSOC_I2C_STAT_CMD_DONE BIT(8) |
| #define SIRFSOC_I2C_STAT_ERR BIT(9) |
| #define SIRFSOC_I2C_CMD_INDEX (0x1F<<16) |
| |
| /* I2C control flags */ |
| #define SIRFSOC_I2C_RESET BIT(0) |
| #define SIRFSOC_I2C_CORE_EN BIT(1) |
| #define SIRFSOC_I2C_MASTER_MODE BIT(2) |
| #define SIRFSOC_I2C_CMD_DONE_EN BIT(11) |
| #define SIRFSOC_I2C_ERR_INT_EN BIT(12) |
| |
| #define SIRFSOC_I2C_SDA_DELAY_MASK (0xFF) |
| #define SIRFSOC_I2C_SCLF_FILTER (3<<8) |
| |
| #define SIRFSOC_I2C_START_CMD BIT(0) |
| |
| #define SIRFSOC_I2C_CMD_RP(x) ((x)&0x7) |
| #define SIRFSOC_I2C_NACK BIT(3) |
| #define SIRFSOC_I2C_WRITE BIT(4) |
| #define SIRFSOC_I2C_READ BIT(5) |
| #define SIRFSOC_I2C_STOP BIT(6) |
| #define SIRFSOC_I2C_START BIT(7) |
| |
| #define SIRFSOC_I2C_DEFAULT_SPEED 100000 |
| #define SIRFSOC_I2C_ERR_NOACK 1 |
| #define SIRFSOC_I2C_ERR_TIMEOUT 2 |
| |
| struct sirfsoc_i2c { |
| void __iomem *base; |
| struct clk *clk; |
| u32 cmd_ptr; /* Current position in CMD buffer */ |
| u8 *buf; /* Buffer passed by user */ |
| u32 msg_len; /* Message length */ |
| u32 finished_len; /* number of bytes read/written */ |
| u32 read_cmd_len; /* number of read cmd sent */ |
| int msg_read; /* 1 indicates a read message */ |
| int err_status; /* 1 indicates an error on bus */ |
| |
| u32 sda_delay; /* For suspend/resume */ |
| u32 clk_div; |
| int last; /* Last message in transfer, STOP cmd can be sent */ |
| |
| struct completion done; /* indicates completion of message transfer */ |
| struct i2c_adapter adapter; |
| }; |
| |
| static void i2c_sirfsoc_read_data(struct sirfsoc_i2c *siic) |
| { |
| u32 data = 0; |
| int i; |
| |
| for (i = 0; i < siic->read_cmd_len; i++) { |
| if (!(i & 0x3)) |
| data = readl(siic->base + SIRFSOC_I2C_DATA_BUF + i); |
| siic->buf[siic->finished_len++] = |
| (u8)((data & SIRFSOC_I2C_DATA_MASK(i)) >> |
| SIRFSOC_I2C_DATA_SHIFT(i)); |
| } |
| } |
| |
| static void i2c_sirfsoc_queue_cmd(struct sirfsoc_i2c *siic) |
| { |
| u32 regval; |
| int i = 0; |
| |
| if (siic->msg_read) { |
| while (((siic->finished_len + i) < siic->msg_len) |
| && (siic->cmd_ptr < SIRFSOC_I2C_CMD_BUF_MAX)) { |
| regval = SIRFSOC_I2C_READ | SIRFSOC_I2C_CMD_RP(0); |
| if (((siic->finished_len + i) == |
| (siic->msg_len - 1)) && siic->last) |
| regval |= SIRFSOC_I2C_STOP | SIRFSOC_I2C_NACK; |
| writel(regval, |
| siic->base + SIRFSOC_I2C_CMD(siic->cmd_ptr++)); |
| i++; |
| } |
| |
| siic->read_cmd_len = i; |
| } else { |
| while ((siic->cmd_ptr < SIRFSOC_I2C_CMD_BUF_MAX - 1) |
| && (siic->finished_len < siic->msg_len)) { |
| regval = SIRFSOC_I2C_WRITE | SIRFSOC_I2C_CMD_RP(0); |
| if ((siic->finished_len == (siic->msg_len - 1)) |
| && siic->last) |
| regval |= SIRFSOC_I2C_STOP; |
| writel(regval, |
| siic->base + SIRFSOC_I2C_CMD(siic->cmd_ptr++)); |
| writel(siic->buf[siic->finished_len++], |
| siic->base + SIRFSOC_I2C_CMD(siic->cmd_ptr++)); |
| } |
| } |
| siic->cmd_ptr = 0; |
| |
| /* Trigger the transfer */ |
| writel(SIRFSOC_I2C_START_CMD, siic->base + SIRFSOC_I2C_CMD_START); |
| } |
| |
| static irqreturn_t i2c_sirfsoc_irq(int irq, void *dev_id) |
| { |
| struct sirfsoc_i2c *siic = (struct sirfsoc_i2c *)dev_id; |
| u32 i2c_stat = readl(siic->base + SIRFSOC_I2C_STATUS); |
| |
| if (i2c_stat & SIRFSOC_I2C_STAT_ERR) { |
| /* Error conditions */ |
| siic->err_status = SIRFSOC_I2C_ERR_NOACK; |
| writel(SIRFSOC_I2C_STAT_ERR, siic->base + SIRFSOC_I2C_STATUS); |
| |
| if (i2c_stat & SIRFSOC_I2C_STAT_NACK) |
| dev_dbg(&siic->adapter.dev, "ACK not received\n"); |
| else |
| dev_err(&siic->adapter.dev, "I2C error\n"); |
| |
| /* |
| * Due to hardware ANOMALY, we need to reset I2C earlier after |
| * we get NOACK while accessing non-existing clients, otherwise |
| * we will get errors even we access existing clients later |
| */ |
| writel(readl(siic->base + SIRFSOC_I2C_CTRL) | SIRFSOC_I2C_RESET, |
| siic->base + SIRFSOC_I2C_CTRL); |
| while (readl(siic->base + SIRFSOC_I2C_CTRL) & SIRFSOC_I2C_RESET) |
| cpu_relax(); |
| |
| complete(&siic->done); |
| } else if (i2c_stat & SIRFSOC_I2C_STAT_CMD_DONE) { |
| /* CMD buffer execution complete */ |
| if (siic->msg_read) |
| i2c_sirfsoc_read_data(siic); |
| if (siic->finished_len == siic->msg_len) |
| complete(&siic->done); |
| else /* Fill a new CMD buffer for left data */ |
| i2c_sirfsoc_queue_cmd(siic); |
| |
| writel(SIRFSOC_I2C_STAT_CMD_DONE, siic->base + SIRFSOC_I2C_STATUS); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void i2c_sirfsoc_set_address(struct sirfsoc_i2c *siic, |
| struct i2c_msg *msg) |
| { |
| unsigned char addr; |
| u32 regval = SIRFSOC_I2C_START | SIRFSOC_I2C_CMD_RP(0) | SIRFSOC_I2C_WRITE; |
| |
| /* no data and last message -> add STOP */ |
| if (siic->last && (msg->len == 0)) |
| regval |= SIRFSOC_I2C_STOP; |
| |
| writel(regval, siic->base + SIRFSOC_I2C_CMD(siic->cmd_ptr++)); |
| |
| addr = msg->addr << 1; /* Generate address */ |
| if (msg->flags & I2C_M_RD) |
| addr |= 1; |
| |
| /* Reverse direction bit */ |
| if (msg->flags & I2C_M_REV_DIR_ADDR) |
| addr ^= 1; |
| |
| writel(addr, siic->base + SIRFSOC_I2C_CMD(siic->cmd_ptr++)); |
| } |
| |
| static int i2c_sirfsoc_xfer_msg(struct sirfsoc_i2c *siic, struct i2c_msg *msg) |
| { |
| u32 regval = readl(siic->base + SIRFSOC_I2C_CTRL); |
| /* timeout waiting for the xfer to finish or fail */ |
| int timeout = msecs_to_jiffies((msg->len + 1) * 50); |
| |
| i2c_sirfsoc_set_address(siic, msg); |
| |
| writel(regval | SIRFSOC_I2C_CMD_DONE_EN | SIRFSOC_I2C_ERR_INT_EN, |
| siic->base + SIRFSOC_I2C_CTRL); |
| i2c_sirfsoc_queue_cmd(siic); |
| |
| if (wait_for_completion_timeout(&siic->done, timeout) == 0) { |
| siic->err_status = SIRFSOC_I2C_ERR_TIMEOUT; |
| dev_err(&siic->adapter.dev, "Transfer timeout\n"); |
| } |
| |
| writel(regval & ~(SIRFSOC_I2C_CMD_DONE_EN | SIRFSOC_I2C_ERR_INT_EN), |
| siic->base + SIRFSOC_I2C_CTRL); |
| writel(0, siic->base + SIRFSOC_I2C_CMD_START); |
| |
| /* i2c control doesn't response, reset it */ |
| if (siic->err_status == SIRFSOC_I2C_ERR_TIMEOUT) { |
| writel(readl(siic->base + SIRFSOC_I2C_CTRL) | SIRFSOC_I2C_RESET, |
| siic->base + SIRFSOC_I2C_CTRL); |
| while (readl(siic->base + SIRFSOC_I2C_CTRL) & SIRFSOC_I2C_RESET) |
| cpu_relax(); |
| } |
| return siic->err_status ? -EAGAIN : 0; |
| } |
| |
| static u32 i2c_sirfsoc_func(struct i2c_adapter *adap) |
| { |
| return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; |
| } |
| |
| static int i2c_sirfsoc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, |
| int num) |
| { |
| struct sirfsoc_i2c *siic = adap->algo_data; |
| int i, ret; |
| |
| clk_enable(siic->clk); |
| |
| for (i = 0; i < num; i++) { |
| siic->buf = msgs[i].buf; |
| siic->msg_len = msgs[i].len; |
| siic->msg_read = !!(msgs[i].flags & I2C_M_RD); |
| siic->err_status = 0; |
| siic->cmd_ptr = 0; |
| siic->finished_len = 0; |
| siic->last = (i == (num - 1)); |
| |
| ret = i2c_sirfsoc_xfer_msg(siic, &msgs[i]); |
| if (ret) { |
| clk_disable(siic->clk); |
| return ret; |
| } |
| } |
| |
| clk_disable(siic->clk); |
| return num; |
| } |
| |
| /* I2C algorithms associated with this master controller driver */ |
| static const struct i2c_algorithm i2c_sirfsoc_algo = { |
| .master_xfer = i2c_sirfsoc_xfer, |
| .functionality = i2c_sirfsoc_func, |
| }; |
| |
| static int i2c_sirfsoc_probe(struct platform_device *pdev) |
| { |
| struct sirfsoc_i2c *siic; |
| struct i2c_adapter *adap; |
| struct resource *mem_res; |
| struct clk *clk; |
| int bitrate; |
| int ctrl_speed; |
| int irq; |
| |
| int err; |
| u32 regval; |
| |
| clk = clk_get(&pdev->dev, NULL); |
| if (IS_ERR(clk)) { |
| err = PTR_ERR(clk); |
| dev_err(&pdev->dev, "Clock get failed\n"); |
| goto err_get_clk; |
| } |
| |
| err = clk_prepare(clk); |
| if (err) { |
| dev_err(&pdev->dev, "Clock prepare failed\n"); |
| goto err_clk_prep; |
| } |
| |
| err = clk_enable(clk); |
| if (err) { |
| dev_err(&pdev->dev, "Clock enable failed\n"); |
| goto err_clk_en; |
| } |
| |
| ctrl_speed = clk_get_rate(clk); |
| |
| siic = devm_kzalloc(&pdev->dev, sizeof(*siic), GFP_KERNEL); |
| if (!siic) { |
| dev_err(&pdev->dev, "Can't allocate driver data\n"); |
| err = -ENOMEM; |
| goto out; |
| } |
| adap = &siic->adapter; |
| adap->class = I2C_CLASS_HWMON; |
| |
| mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| siic->base = devm_ioremap_resource(&pdev->dev, mem_res); |
| if (IS_ERR(siic->base)) { |
| err = PTR_ERR(siic->base); |
| goto out; |
| } |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) { |
| err = irq; |
| goto out; |
| } |
| err = devm_request_irq(&pdev->dev, irq, i2c_sirfsoc_irq, 0, |
| dev_name(&pdev->dev), siic); |
| if (err) |
| goto out; |
| |
| adap->algo = &i2c_sirfsoc_algo; |
| adap->algo_data = siic; |
| adap->retries = 3; |
| |
| adap->dev.of_node = pdev->dev.of_node; |
| adap->dev.parent = &pdev->dev; |
| adap->nr = pdev->id; |
| |
| strlcpy(adap->name, "sirfsoc-i2c", sizeof(adap->name)); |
| |
| platform_set_drvdata(pdev, adap); |
| init_completion(&siic->done); |
| |
| /* Controller Initalisation */ |
| |
| writel(SIRFSOC_I2C_RESET, siic->base + SIRFSOC_I2C_CTRL); |
| while (readl(siic->base + SIRFSOC_I2C_CTRL) & SIRFSOC_I2C_RESET) |
| cpu_relax(); |
| writel(SIRFSOC_I2C_CORE_EN | SIRFSOC_I2C_MASTER_MODE, |
| siic->base + SIRFSOC_I2C_CTRL); |
| |
| siic->clk = clk; |
| |
| err = of_property_read_u32(pdev->dev.of_node, |
| "clock-frequency", &bitrate); |
| if (err < 0) |
| bitrate = SIRFSOC_I2C_DEFAULT_SPEED; |
| |
| if (bitrate < 100000) |
| regval = |
| (2 * ctrl_speed) / (bitrate * 11); |
| else |
| regval = ctrl_speed / (bitrate * 5); |
| |
| writel(regval, siic->base + SIRFSOC_I2C_CLK_CTRL); |
| if (regval > 0xFF) |
| writel(0xFF, siic->base + SIRFSOC_I2C_SDA_DELAY); |
| else |
| writel(regval, siic->base + SIRFSOC_I2C_SDA_DELAY); |
| |
| err = i2c_add_numbered_adapter(adap); |
| if (err < 0) { |
| dev_err(&pdev->dev, "Can't add new i2c adapter\n"); |
| goto out; |
| } |
| |
| clk_disable(clk); |
| |
| dev_info(&pdev->dev, " I2C adapter ready to operate\n"); |
| |
| return 0; |
| |
| out: |
| clk_disable(clk); |
| err_clk_en: |
| clk_unprepare(clk); |
| err_clk_prep: |
| clk_put(clk); |
| err_get_clk: |
| return err; |
| } |
| |
| static int i2c_sirfsoc_remove(struct platform_device *pdev) |
| { |
| struct i2c_adapter *adapter = platform_get_drvdata(pdev); |
| struct sirfsoc_i2c *siic = adapter->algo_data; |
| |
| writel(SIRFSOC_I2C_RESET, siic->base + SIRFSOC_I2C_CTRL); |
| i2c_del_adapter(adapter); |
| clk_unprepare(siic->clk); |
| clk_put(siic->clk); |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int i2c_sirfsoc_suspend(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct i2c_adapter *adapter = platform_get_drvdata(pdev); |
| struct sirfsoc_i2c *siic = adapter->algo_data; |
| |
| clk_enable(siic->clk); |
| siic->sda_delay = readl(siic->base + SIRFSOC_I2C_SDA_DELAY); |
| siic->clk_div = readl(siic->base + SIRFSOC_I2C_CLK_CTRL); |
| clk_disable(siic->clk); |
| return 0; |
| } |
| |
| static int i2c_sirfsoc_resume(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct i2c_adapter *adapter = platform_get_drvdata(pdev); |
| struct sirfsoc_i2c *siic = adapter->algo_data; |
| |
| clk_enable(siic->clk); |
| writel(SIRFSOC_I2C_RESET, siic->base + SIRFSOC_I2C_CTRL); |
| while (readl(siic->base + SIRFSOC_I2C_CTRL) & SIRFSOC_I2C_RESET) |
| cpu_relax(); |
| writel(SIRFSOC_I2C_CORE_EN | SIRFSOC_I2C_MASTER_MODE, |
| siic->base + SIRFSOC_I2C_CTRL); |
| writel(siic->clk_div, siic->base + SIRFSOC_I2C_CLK_CTRL); |
| writel(siic->sda_delay, siic->base + SIRFSOC_I2C_SDA_DELAY); |
| clk_disable(siic->clk); |
| return 0; |
| } |
| |
| static const struct dev_pm_ops i2c_sirfsoc_pm_ops = { |
| .suspend = i2c_sirfsoc_suspend, |
| .resume = i2c_sirfsoc_resume, |
| }; |
| #endif |
| |
| static const struct of_device_id sirfsoc_i2c_of_match[] = { |
| { .compatible = "sirf,prima2-i2c", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, sirfsoc_i2c_of_match); |
| |
| static struct platform_driver i2c_sirfsoc_driver = { |
| .driver = { |
| .name = "sirfsoc_i2c", |
| .owner = THIS_MODULE, |
| #ifdef CONFIG_PM |
| .pm = &i2c_sirfsoc_pm_ops, |
| #endif |
| .of_match_table = sirfsoc_i2c_of_match, |
| }, |
| .probe = i2c_sirfsoc_probe, |
| .remove = i2c_sirfsoc_remove, |
| }; |
| module_platform_driver(i2c_sirfsoc_driver); |
| |
| MODULE_DESCRIPTION("SiRF SoC I2C master controller driver"); |
| MODULE_AUTHOR("Zhiwu Song <Zhiwu.Song@csr.com>, " |
| "Xiangzhen Ye <Xiangzhen.Ye@csr.com>"); |
| MODULE_LICENSE("GPL v2"); |