| /* |
| * hid-cp2112.c - Silicon Labs HID USB to SMBus master bridge |
| * Copyright (c) 2013,2014 Uplogix, Inc. |
| * David Barksdale <dbarksdale@uplogix.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| */ |
| |
| /* |
| * The Silicon Labs CP2112 chip is a USB HID device which provides an |
| * SMBus controller for talking to slave devices and 8 GPIO pins. The |
| * host communicates with the CP2112 via raw HID reports. |
| * |
| * Data Sheet: |
| * http://www.silabs.com/Support%20Documents/TechnicalDocs/CP2112.pdf |
| * Programming Interface Specification: |
| * http://www.silabs.com/Support%20Documents/TechnicalDocs/AN495.pdf |
| */ |
| |
| #include <linux/gpio.h> |
| #include <linux/hid.h> |
| #include <linux/i2c.h> |
| #include <linux/module.h> |
| #include <linux/nls.h> |
| #include <linux/usb/ch9.h> |
| #include "hid-ids.h" |
| |
| enum { |
| CP2112_GPIO_CONFIG = 0x02, |
| CP2112_GPIO_GET = 0x03, |
| CP2112_GPIO_SET = 0x04, |
| CP2112_GET_VERSION_INFO = 0x05, |
| CP2112_SMBUS_CONFIG = 0x06, |
| CP2112_DATA_READ_REQUEST = 0x10, |
| CP2112_DATA_WRITE_READ_REQUEST = 0x11, |
| CP2112_DATA_READ_FORCE_SEND = 0x12, |
| CP2112_DATA_READ_RESPONSE = 0x13, |
| CP2112_DATA_WRITE_REQUEST = 0x14, |
| CP2112_TRANSFER_STATUS_REQUEST = 0x15, |
| CP2112_TRANSFER_STATUS_RESPONSE = 0x16, |
| CP2112_CANCEL_TRANSFER = 0x17, |
| CP2112_LOCK_BYTE = 0x20, |
| CP2112_USB_CONFIG = 0x21, |
| CP2112_MANUFACTURER_STRING = 0x22, |
| CP2112_PRODUCT_STRING = 0x23, |
| CP2112_SERIAL_STRING = 0x24, |
| }; |
| |
| enum { |
| STATUS0_IDLE = 0x00, |
| STATUS0_BUSY = 0x01, |
| STATUS0_COMPLETE = 0x02, |
| STATUS0_ERROR = 0x03, |
| }; |
| |
| enum { |
| STATUS1_TIMEOUT_NACK = 0x00, |
| STATUS1_TIMEOUT_BUS = 0x01, |
| STATUS1_ARBITRATION_LOST = 0x02, |
| STATUS1_READ_INCOMPLETE = 0x03, |
| STATUS1_WRITE_INCOMPLETE = 0x04, |
| STATUS1_SUCCESS = 0x05, |
| }; |
| |
| struct cp2112_smbus_config_report { |
| u8 report; /* CP2112_SMBUS_CONFIG */ |
| __be32 clock_speed; /* Hz */ |
| u8 device_address; /* Stored in the upper 7 bits */ |
| u8 auto_send_read; /* 1 = enabled, 0 = disabled */ |
| __be16 write_timeout; /* ms, 0 = no timeout */ |
| __be16 read_timeout; /* ms, 0 = no timeout */ |
| u8 scl_low_timeout; /* 1 = enabled, 0 = disabled */ |
| __be16 retry_time; /* # of retries, 0 = no limit */ |
| } __packed; |
| |
| struct cp2112_usb_config_report { |
| u8 report; /* CP2112_USB_CONFIG */ |
| __le16 vid; /* Vendor ID */ |
| __le16 pid; /* Product ID */ |
| u8 max_power; /* Power requested in 2mA units */ |
| u8 power_mode; /* 0x00 = bus powered |
| 0x01 = self powered & regulator off |
| 0x02 = self powered & regulator on */ |
| u8 release_major; |
| u8 release_minor; |
| u8 mask; /* What fields to program */ |
| } __packed; |
| |
| struct cp2112_read_req_report { |
| u8 report; /* CP2112_DATA_READ_REQUEST */ |
| u8 slave_address; |
| __be16 length; |
| } __packed; |
| |
| struct cp2112_write_read_req_report { |
| u8 report; /* CP2112_DATA_WRITE_READ_REQUEST */ |
| u8 slave_address; |
| __be16 length; |
| u8 target_address_length; |
| u8 target_address[16]; |
| } __packed; |
| |
| struct cp2112_write_req_report { |
| u8 report; /* CP2112_DATA_WRITE_REQUEST */ |
| u8 slave_address; |
| u8 length; |
| u8 data[61]; |
| } __packed; |
| |
| struct cp2112_force_read_report { |
| u8 report; /* CP2112_DATA_READ_FORCE_SEND */ |
| __be16 length; |
| } __packed; |
| |
| struct cp2112_xfer_status_report { |
| u8 report; /* CP2112_TRANSFER_STATUS_RESPONSE */ |
| u8 status0; /* STATUS0_* */ |
| u8 status1; /* STATUS1_* */ |
| __be16 retries; |
| __be16 length; |
| } __packed; |
| |
| struct cp2112_string_report { |
| u8 dummy; /* force .string to be aligned */ |
| u8 report; /* CP2112_*_STRING */ |
| u8 length; /* length in bytes of everyting after .report */ |
| u8 type; /* USB_DT_STRING */ |
| wchar_t string[30]; /* UTF16_LITTLE_ENDIAN string */ |
| } __packed; |
| |
| /* Number of times to request transfer status before giving up waiting for a |
| transfer to complete. This may need to be changed if SMBUS clock, retries, |
| or read/write/scl_low timeout settings are changed. */ |
| static const int XFER_STATUS_RETRIES = 10; |
| |
| /* Time in ms to wait for a CP2112_DATA_READ_RESPONSE or |
| CP2112_TRANSFER_STATUS_RESPONSE. */ |
| static const int RESPONSE_TIMEOUT = 50; |
| |
| static const struct hid_device_id cp2112_devices[] = { |
| { HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, USB_DEVICE_ID_CYGNAL_CP2112) }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(hid, cp2112_devices); |
| |
| struct cp2112_device { |
| struct i2c_adapter adap; |
| struct hid_device *hdev; |
| wait_queue_head_t wait; |
| u8 read_data[61]; |
| u8 read_length; |
| int xfer_status; |
| atomic_t read_avail; |
| atomic_t xfer_avail; |
| struct gpio_chip gc; |
| }; |
| |
| static int gpio_push_pull = 0xFF; |
| module_param(gpio_push_pull, int, S_IRUGO | S_IWUSR); |
| MODULE_PARM_DESC(gpio_push_pull, "GPIO push-pull configuration bitmask"); |
| |
| static int cp2112_gpio_direction_input(struct gpio_chip *chip, unsigned offset) |
| { |
| struct cp2112_device *dev = container_of(chip, struct cp2112_device, |
| gc); |
| struct hid_device *hdev = dev->hdev; |
| u8 buf[5]; |
| int ret; |
| |
| ret = hid_hw_raw_request(hdev, CP2112_GPIO_CONFIG, buf, |
| sizeof(buf), HID_FEATURE_REPORT, |
| HID_REQ_GET_REPORT); |
| if (ret != sizeof(buf)) { |
| hid_err(hdev, "error requesting GPIO config: %d\n", ret); |
| return ret; |
| } |
| |
| buf[1] &= ~(1 << offset); |
| buf[2] = gpio_push_pull; |
| |
| ret = hid_hw_raw_request(hdev, CP2112_GPIO_CONFIG, buf, sizeof(buf), |
| HID_FEATURE_REPORT, HID_REQ_SET_REPORT); |
| if (ret < 0) { |
| hid_err(hdev, "error setting GPIO config: %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void cp2112_gpio_set(struct gpio_chip *chip, unsigned offset, int value) |
| { |
| struct cp2112_device *dev = container_of(chip, struct cp2112_device, |
| gc); |
| struct hid_device *hdev = dev->hdev; |
| u8 buf[3]; |
| int ret; |
| |
| buf[0] = CP2112_GPIO_SET; |
| buf[1] = value ? 0xff : 0; |
| buf[2] = 1 << offset; |
| |
| ret = hid_hw_raw_request(hdev, CP2112_GPIO_SET, buf, sizeof(buf), |
| HID_FEATURE_REPORT, HID_REQ_SET_REPORT); |
| if (ret < 0) |
| hid_err(hdev, "error setting GPIO values: %d\n", ret); |
| } |
| |
| static int cp2112_gpio_get(struct gpio_chip *chip, unsigned offset) |
| { |
| struct cp2112_device *dev = container_of(chip, struct cp2112_device, |
| gc); |
| struct hid_device *hdev = dev->hdev; |
| u8 buf[2]; |
| int ret; |
| |
| ret = hid_hw_raw_request(hdev, CP2112_GPIO_GET, buf, sizeof(buf), |
| HID_FEATURE_REPORT, HID_REQ_GET_REPORT); |
| if (ret != sizeof(buf)) { |
| hid_err(hdev, "error requesting GPIO values: %d\n", ret); |
| return ret; |
| } |
| |
| return (buf[1] >> offset) & 1; |
| } |
| |
| static int cp2112_gpio_direction_output(struct gpio_chip *chip, |
| unsigned offset, int value) |
| { |
| struct cp2112_device *dev = container_of(chip, struct cp2112_device, |
| gc); |
| struct hid_device *hdev = dev->hdev; |
| u8 buf[5]; |
| int ret; |
| |
| ret = hid_hw_raw_request(hdev, CP2112_GPIO_CONFIG, buf, |
| sizeof(buf), HID_FEATURE_REPORT, |
| HID_REQ_GET_REPORT); |
| if (ret != sizeof(buf)) { |
| hid_err(hdev, "error requesting GPIO config: %d\n", ret); |
| return ret; |
| } |
| |
| buf[1] |= 1 << offset; |
| buf[2] = gpio_push_pull; |
| |
| ret = hid_hw_raw_request(hdev, CP2112_GPIO_CONFIG, buf, sizeof(buf), |
| HID_FEATURE_REPORT, HID_REQ_SET_REPORT); |
| if (ret < 0) { |
| hid_err(hdev, "error setting GPIO config: %d\n", ret); |
| return ret; |
| } |
| |
| /* |
| * Set gpio value when output direction is already set, |
| * as specified in AN495, Rev. 0.2, cpt. 4.4 |
| */ |
| cp2112_gpio_set(chip, offset, value); |
| |
| return 0; |
| } |
| |
| static int cp2112_hid_get(struct hid_device *hdev, unsigned char report_number, |
| u8 *data, size_t count, unsigned char report_type) |
| { |
| u8 *buf; |
| int ret; |
| |
| buf = kmalloc(count, GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| |
| ret = hid_hw_raw_request(hdev, report_number, buf, count, |
| report_type, HID_REQ_GET_REPORT); |
| memcpy(data, buf, count); |
| kfree(buf); |
| return ret; |
| } |
| |
| static int cp2112_hid_output(struct hid_device *hdev, u8 *data, size_t count, |
| unsigned char report_type) |
| { |
| u8 *buf; |
| int ret; |
| |
| buf = kmemdup(data, count, GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| |
| if (report_type == HID_OUTPUT_REPORT) |
| ret = hid_hw_output_report(hdev, buf, count); |
| else |
| ret = hid_hw_raw_request(hdev, buf[0], buf, count, report_type, |
| HID_REQ_SET_REPORT); |
| |
| kfree(buf); |
| return ret; |
| } |
| |
| static int cp2112_wait(struct cp2112_device *dev, atomic_t *avail) |
| { |
| int ret = 0; |
| |
| /* We have sent either a CP2112_TRANSFER_STATUS_REQUEST or a |
| * CP2112_DATA_READ_FORCE_SEND and we are waiting for the response to |
| * come in cp2112_raw_event or timeout. There will only be one of these |
| * in flight at any one time. The timeout is extremely large and is a |
| * last resort if the CP2112 has died. If we do timeout we don't expect |
| * to receive the response which would cause data races, it's not like |
| * we can do anything about it anyway. |
| */ |
| ret = wait_event_interruptible_timeout(dev->wait, |
| atomic_read(avail), msecs_to_jiffies(RESPONSE_TIMEOUT)); |
| if (-ERESTARTSYS == ret) |
| return ret; |
| if (!ret) |
| return -ETIMEDOUT; |
| |
| atomic_set(avail, 0); |
| return 0; |
| } |
| |
| static int cp2112_xfer_status(struct cp2112_device *dev) |
| { |
| struct hid_device *hdev = dev->hdev; |
| u8 buf[2]; |
| int ret; |
| |
| buf[0] = CP2112_TRANSFER_STATUS_REQUEST; |
| buf[1] = 0x01; |
| atomic_set(&dev->xfer_avail, 0); |
| |
| ret = cp2112_hid_output(hdev, buf, 2, HID_OUTPUT_REPORT); |
| if (ret < 0) { |
| hid_warn(hdev, "Error requesting status: %d\n", ret); |
| return ret; |
| } |
| |
| ret = cp2112_wait(dev, &dev->xfer_avail); |
| if (ret) |
| return ret; |
| |
| return dev->xfer_status; |
| } |
| |
| static int cp2112_read(struct cp2112_device *dev, u8 *data, size_t size) |
| { |
| struct hid_device *hdev = dev->hdev; |
| struct cp2112_force_read_report report; |
| int ret; |
| |
| if (size > sizeof(dev->read_data)) |
| size = sizeof(dev->read_data); |
| report.report = CP2112_DATA_READ_FORCE_SEND; |
| report.length = cpu_to_be16(size); |
| |
| atomic_set(&dev->read_avail, 0); |
| |
| ret = cp2112_hid_output(hdev, &report.report, sizeof(report), |
| HID_OUTPUT_REPORT); |
| if (ret < 0) { |
| hid_warn(hdev, "Error requesting data: %d\n", ret); |
| return ret; |
| } |
| |
| ret = cp2112_wait(dev, &dev->read_avail); |
| if (ret) |
| return ret; |
| |
| hid_dbg(hdev, "read %d of %zd bytes requested\n", |
| dev->read_length, size); |
| |
| if (size > dev->read_length) |
| size = dev->read_length; |
| |
| memcpy(data, dev->read_data, size); |
| return dev->read_length; |
| } |
| |
| static int cp2112_read_req(void *buf, u8 slave_address, u16 length) |
| { |
| struct cp2112_read_req_report *report = buf; |
| |
| if (length < 1 || length > 512) |
| return -EINVAL; |
| |
| report->report = CP2112_DATA_READ_REQUEST; |
| report->slave_address = slave_address << 1; |
| report->length = cpu_to_be16(length); |
| return sizeof(*report); |
| } |
| |
| static int cp2112_write_read_req(void *buf, u8 slave_address, u16 length, |
| u8 command, u8 *data, u8 data_length) |
| { |
| struct cp2112_write_read_req_report *report = buf; |
| |
| if (length < 1 || length > 512 |
| || data_length > sizeof(report->target_address) - 1) |
| return -EINVAL; |
| |
| report->report = CP2112_DATA_WRITE_READ_REQUEST; |
| report->slave_address = slave_address << 1; |
| report->length = cpu_to_be16(length); |
| report->target_address_length = data_length + 1; |
| report->target_address[0] = command; |
| memcpy(&report->target_address[1], data, data_length); |
| return data_length + 6; |
| } |
| |
| static int cp2112_write_req(void *buf, u8 slave_address, u8 command, u8 *data, |
| u8 data_length) |
| { |
| struct cp2112_write_req_report *report = buf; |
| |
| if (data_length > sizeof(report->data) - 1) |
| return -EINVAL; |
| |
| report->report = CP2112_DATA_WRITE_REQUEST; |
| report->slave_address = slave_address << 1; |
| report->length = data_length + 1; |
| report->data[0] = command; |
| memcpy(&report->data[1], data, data_length); |
| return data_length + 4; |
| } |
| |
| static int cp2112_i2c_write_req(void *buf, u8 slave_address, u8 *data, |
| u8 data_length) |
| { |
| struct cp2112_write_req_report *report = buf; |
| |
| if (data_length > sizeof(report->data)) |
| return -EINVAL; |
| |
| report->report = CP2112_DATA_WRITE_REQUEST; |
| report->slave_address = slave_address << 1; |
| report->length = data_length; |
| memcpy(report->data, data, data_length); |
| return data_length + 3; |
| } |
| |
| static int cp2112_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, |
| int num) |
| { |
| struct cp2112_device *dev = (struct cp2112_device *)adap->algo_data; |
| struct hid_device *hdev = dev->hdev; |
| u8 buf[64]; |
| ssize_t count; |
| unsigned int retries; |
| int ret; |
| |
| hid_dbg(hdev, "I2C %d messages\n", num); |
| |
| if (num != 1) { |
| hid_err(hdev, |
| "Multi-message I2C transactions not supported\n"); |
| return -EOPNOTSUPP; |
| } |
| |
| if (msgs->flags & I2C_M_RD) |
| count = cp2112_read_req(buf, msgs->addr, msgs->len); |
| else |
| count = cp2112_i2c_write_req(buf, msgs->addr, msgs->buf, |
| msgs->len); |
| |
| if (count < 0) |
| return count; |
| |
| ret = hid_hw_power(hdev, PM_HINT_FULLON); |
| if (ret < 0) { |
| hid_err(hdev, "power management error: %d\n", ret); |
| return ret; |
| } |
| |
| ret = cp2112_hid_output(hdev, buf, count, HID_OUTPUT_REPORT); |
| if (ret < 0) { |
| hid_warn(hdev, "Error starting transaction: %d\n", ret); |
| goto power_normal; |
| } |
| |
| for (retries = 0; retries < XFER_STATUS_RETRIES; ++retries) { |
| ret = cp2112_xfer_status(dev); |
| if (-EBUSY == ret) |
| continue; |
| if (ret < 0) |
| goto power_normal; |
| break; |
| } |
| |
| if (XFER_STATUS_RETRIES <= retries) { |
| hid_warn(hdev, "Transfer timed out, cancelling.\n"); |
| buf[0] = CP2112_CANCEL_TRANSFER; |
| buf[1] = 0x01; |
| |
| ret = cp2112_hid_output(hdev, buf, 2, HID_OUTPUT_REPORT); |
| if (ret < 0) |
| hid_warn(hdev, "Error cancelling transaction: %d\n", |
| ret); |
| |
| ret = -ETIMEDOUT; |
| goto power_normal; |
| } |
| |
| if (!(msgs->flags & I2C_M_RD)) |
| goto finish; |
| |
| ret = cp2112_read(dev, msgs->buf, msgs->len); |
| if (ret < 0) |
| goto power_normal; |
| if (ret != msgs->len) { |
| hid_warn(hdev, "short read: %d < %d\n", ret, msgs->len); |
| ret = -EIO; |
| goto power_normal; |
| } |
| |
| finish: |
| /* return the number of transferred messages */ |
| ret = 1; |
| |
| power_normal: |
| hid_hw_power(hdev, PM_HINT_NORMAL); |
| hid_dbg(hdev, "I2C transfer finished: %d\n", ret); |
| return ret; |
| } |
| |
| static int cp2112_xfer(struct i2c_adapter *adap, u16 addr, |
| unsigned short flags, char read_write, u8 command, |
| int size, union i2c_smbus_data *data) |
| { |
| struct cp2112_device *dev = (struct cp2112_device *)adap->algo_data; |
| struct hid_device *hdev = dev->hdev; |
| u8 buf[64]; |
| __le16 word; |
| ssize_t count; |
| size_t read_length = 0; |
| unsigned int retries; |
| int ret; |
| |
| hid_dbg(hdev, "%s addr 0x%x flags 0x%x cmd 0x%x size %d\n", |
| read_write == I2C_SMBUS_WRITE ? "write" : "read", |
| addr, flags, command, size); |
| |
| switch (size) { |
| case I2C_SMBUS_BYTE: |
| read_length = 1; |
| |
| if (I2C_SMBUS_READ == read_write) |
| count = cp2112_read_req(buf, addr, read_length); |
| else |
| count = cp2112_write_req(buf, addr, command, NULL, |
| 0); |
| break; |
| case I2C_SMBUS_BYTE_DATA: |
| read_length = 1; |
| |
| if (I2C_SMBUS_READ == read_write) |
| count = cp2112_write_read_req(buf, addr, read_length, |
| command, NULL, 0); |
| else |
| count = cp2112_write_req(buf, addr, command, |
| &data->byte, 1); |
| break; |
| case I2C_SMBUS_WORD_DATA: |
| read_length = 2; |
| word = cpu_to_le16(data->word); |
| |
| if (I2C_SMBUS_READ == read_write) |
| count = cp2112_write_read_req(buf, addr, read_length, |
| command, NULL, 0); |
| else |
| count = cp2112_write_req(buf, addr, command, |
| (u8 *)&word, 2); |
| break; |
| case I2C_SMBUS_PROC_CALL: |
| size = I2C_SMBUS_WORD_DATA; |
| read_write = I2C_SMBUS_READ; |
| read_length = 2; |
| word = cpu_to_le16(data->word); |
| |
| count = cp2112_write_read_req(buf, addr, read_length, command, |
| (u8 *)&word, 2); |
| break; |
| case I2C_SMBUS_I2C_BLOCK_DATA: |
| size = I2C_SMBUS_BLOCK_DATA; |
| /* fallthrough */ |
| case I2C_SMBUS_BLOCK_DATA: |
| if (I2C_SMBUS_READ == read_write) { |
| count = cp2112_write_read_req(buf, addr, |
| I2C_SMBUS_BLOCK_MAX, |
| command, NULL, 0); |
| } else { |
| count = cp2112_write_req(buf, addr, command, |
| data->block, |
| data->block[0] + 1); |
| } |
| break; |
| case I2C_SMBUS_BLOCK_PROC_CALL: |
| size = I2C_SMBUS_BLOCK_DATA; |
| read_write = I2C_SMBUS_READ; |
| |
| count = cp2112_write_read_req(buf, addr, I2C_SMBUS_BLOCK_MAX, |
| command, data->block, |
| data->block[0] + 1); |
| break; |
| default: |
| hid_warn(hdev, "Unsupported transaction %d\n", size); |
| return -EOPNOTSUPP; |
| } |
| |
| if (count < 0) |
| return count; |
| |
| ret = hid_hw_power(hdev, PM_HINT_FULLON); |
| if (ret < 0) { |
| hid_err(hdev, "power management error: %d\n", ret); |
| return ret; |
| } |
| |
| ret = cp2112_hid_output(hdev, buf, count, HID_OUTPUT_REPORT); |
| if (ret < 0) { |
| hid_warn(hdev, "Error starting transaction: %d\n", ret); |
| goto power_normal; |
| } |
| |
| for (retries = 0; retries < XFER_STATUS_RETRIES; ++retries) { |
| ret = cp2112_xfer_status(dev); |
| if (-EBUSY == ret) |
| continue; |
| if (ret < 0) |
| goto power_normal; |
| break; |
| } |
| |
| if (XFER_STATUS_RETRIES <= retries) { |
| hid_warn(hdev, "Transfer timed out, cancelling.\n"); |
| buf[0] = CP2112_CANCEL_TRANSFER; |
| buf[1] = 0x01; |
| |
| ret = cp2112_hid_output(hdev, buf, 2, HID_OUTPUT_REPORT); |
| if (ret < 0) |
| hid_warn(hdev, "Error cancelling transaction: %d\n", |
| ret); |
| |
| ret = -ETIMEDOUT; |
| goto power_normal; |
| } |
| |
| if (I2C_SMBUS_WRITE == read_write) { |
| ret = 0; |
| goto power_normal; |
| } |
| |
| if (I2C_SMBUS_BLOCK_DATA == size) |
| read_length = ret; |
| |
| ret = cp2112_read(dev, buf, read_length); |
| if (ret < 0) |
| goto power_normal; |
| if (ret != read_length) { |
| hid_warn(hdev, "short read: %d < %zd\n", ret, read_length); |
| ret = -EIO; |
| goto power_normal; |
| } |
| |
| switch (size) { |
| case I2C_SMBUS_BYTE: |
| case I2C_SMBUS_BYTE_DATA: |
| data->byte = buf[0]; |
| break; |
| case I2C_SMBUS_WORD_DATA: |
| data->word = le16_to_cpup((__le16 *)buf); |
| break; |
| case I2C_SMBUS_BLOCK_DATA: |
| if (read_length > I2C_SMBUS_BLOCK_MAX) { |
| ret = -EPROTO; |
| goto power_normal; |
| } |
| |
| memcpy(data->block, buf, read_length); |
| break; |
| } |
| |
| ret = 0; |
| power_normal: |
| hid_hw_power(hdev, PM_HINT_NORMAL); |
| hid_dbg(hdev, "transfer finished: %d\n", ret); |
| return ret; |
| } |
| |
| static u32 cp2112_functionality(struct i2c_adapter *adap) |
| { |
| return I2C_FUNC_I2C | |
| I2C_FUNC_SMBUS_BYTE | |
| I2C_FUNC_SMBUS_BYTE_DATA | |
| I2C_FUNC_SMBUS_WORD_DATA | |
| I2C_FUNC_SMBUS_BLOCK_DATA | |
| I2C_FUNC_SMBUS_I2C_BLOCK | |
| I2C_FUNC_SMBUS_PROC_CALL | |
| I2C_FUNC_SMBUS_BLOCK_PROC_CALL; |
| } |
| |
| static const struct i2c_algorithm smbus_algorithm = { |
| .master_xfer = cp2112_i2c_xfer, |
| .smbus_xfer = cp2112_xfer, |
| .functionality = cp2112_functionality, |
| }; |
| |
| static int cp2112_get_usb_config(struct hid_device *hdev, |
| struct cp2112_usb_config_report *cfg) |
| { |
| int ret; |
| |
| ret = cp2112_hid_get(hdev, CP2112_USB_CONFIG, (u8 *)cfg, sizeof(*cfg), |
| HID_FEATURE_REPORT); |
| if (ret != sizeof(*cfg)) { |
| hid_err(hdev, "error reading usb config: %d\n", ret); |
| if (ret < 0) |
| return ret; |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int cp2112_set_usb_config(struct hid_device *hdev, |
| struct cp2112_usb_config_report *cfg) |
| { |
| int ret; |
| |
| BUG_ON(cfg->report != CP2112_USB_CONFIG); |
| |
| ret = cp2112_hid_output(hdev, (u8 *)cfg, sizeof(*cfg), |
| HID_FEATURE_REPORT); |
| if (ret != sizeof(*cfg)) { |
| hid_err(hdev, "error writing usb config: %d\n", ret); |
| if (ret < 0) |
| return ret; |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static void chmod_sysfs_attrs(struct hid_device *hdev); |
| |
| #define CP2112_CONFIG_ATTR(name, store, format, ...) \ |
| static ssize_t name##_store(struct device *kdev, \ |
| struct device_attribute *attr, const char *buf, \ |
| size_t count) \ |
| { \ |
| struct hid_device *hdev = container_of(kdev, struct hid_device, dev); \ |
| struct cp2112_usb_config_report cfg; \ |
| int ret = cp2112_get_usb_config(hdev, &cfg); \ |
| if (ret) \ |
| return ret; \ |
| store; \ |
| ret = cp2112_set_usb_config(hdev, &cfg); \ |
| if (ret) \ |
| return ret; \ |
| chmod_sysfs_attrs(hdev); \ |
| return count; \ |
| } \ |
| static ssize_t name##_show(struct device *kdev, \ |
| struct device_attribute *attr, char *buf) \ |
| { \ |
| struct hid_device *hdev = container_of(kdev, struct hid_device, dev); \ |
| struct cp2112_usb_config_report cfg; \ |
| int ret = cp2112_get_usb_config(hdev, &cfg); \ |
| if (ret) \ |
| return ret; \ |
| return scnprintf(buf, PAGE_SIZE, format, ##__VA_ARGS__); \ |
| } \ |
| static DEVICE_ATTR_RW(name); |
| |
| CP2112_CONFIG_ATTR(vendor_id, ({ |
| u16 vid; |
| |
| if (sscanf(buf, "%hi", &vid) != 1) |
| return -EINVAL; |
| |
| cfg.vid = cpu_to_le16(vid); |
| cfg.mask = 0x01; |
| }), "0x%04x\n", le16_to_cpu(cfg.vid)); |
| |
| CP2112_CONFIG_ATTR(product_id, ({ |
| u16 pid; |
| |
| if (sscanf(buf, "%hi", &pid) != 1) |
| return -EINVAL; |
| |
| cfg.pid = cpu_to_le16(pid); |
| cfg.mask = 0x02; |
| }), "0x%04x\n", le16_to_cpu(cfg.pid)); |
| |
| CP2112_CONFIG_ATTR(max_power, ({ |
| int mA; |
| |
| if (sscanf(buf, "%i", &mA) != 1) |
| return -EINVAL; |
| |
| cfg.max_power = (mA + 1) / 2; |
| cfg.mask = 0x04; |
| }), "%u mA\n", cfg.max_power * 2); |
| |
| CP2112_CONFIG_ATTR(power_mode, ({ |
| if (sscanf(buf, "%hhi", &cfg.power_mode) != 1) |
| return -EINVAL; |
| |
| cfg.mask = 0x08; |
| }), "%u\n", cfg.power_mode); |
| |
| CP2112_CONFIG_ATTR(release_version, ({ |
| if (sscanf(buf, "%hhi.%hhi", &cfg.release_major, &cfg.release_minor) |
| != 2) |
| return -EINVAL; |
| |
| cfg.mask = 0x10; |
| }), "%u.%u\n", cfg.release_major, cfg.release_minor); |
| |
| #undef CP2112_CONFIG_ATTR |
| |
| struct cp2112_pstring_attribute { |
| struct device_attribute attr; |
| unsigned char report; |
| }; |
| |
| static ssize_t pstr_store(struct device *kdev, |
| struct device_attribute *kattr, const char *buf, |
| size_t count) |
| { |
| struct hid_device *hdev = container_of(kdev, struct hid_device, dev); |
| struct cp2112_pstring_attribute *attr = |
| container_of(kattr, struct cp2112_pstring_attribute, attr); |
| struct cp2112_string_report report; |
| int ret; |
| |
| memset(&report, 0, sizeof(report)); |
| |
| ret = utf8s_to_utf16s(buf, count, UTF16_LITTLE_ENDIAN, |
| report.string, ARRAY_SIZE(report.string)); |
| report.report = attr->report; |
| report.length = ret * sizeof(report.string[0]) + 2; |
| report.type = USB_DT_STRING; |
| |
| ret = cp2112_hid_output(hdev, &report.report, report.length + 1, |
| HID_FEATURE_REPORT); |
| if (ret != report.length + 1) { |
| hid_err(hdev, "error writing %s string: %d\n", kattr->attr.name, |
| ret); |
| if (ret < 0) |
| return ret; |
| return -EIO; |
| } |
| |
| chmod_sysfs_attrs(hdev); |
| return count; |
| } |
| |
| static ssize_t pstr_show(struct device *kdev, |
| struct device_attribute *kattr, char *buf) |
| { |
| struct hid_device *hdev = container_of(kdev, struct hid_device, dev); |
| struct cp2112_pstring_attribute *attr = |
| container_of(kattr, struct cp2112_pstring_attribute, attr); |
| struct cp2112_string_report report; |
| u8 length; |
| int ret; |
| |
| ret = cp2112_hid_get(hdev, attr->report, &report.report, |
| sizeof(report) - 1, HID_FEATURE_REPORT); |
| if (ret < 3) { |
| hid_err(hdev, "error reading %s string: %d\n", kattr->attr.name, |
| ret); |
| if (ret < 0) |
| return ret; |
| return -EIO; |
| } |
| |
| if (report.length < 2) { |
| hid_err(hdev, "invalid %s string length: %d\n", |
| kattr->attr.name, report.length); |
| return -EIO; |
| } |
| |
| length = report.length > ret - 1 ? ret - 1 : report.length; |
| length = (length - 2) / sizeof(report.string[0]); |
| ret = utf16s_to_utf8s(report.string, length, UTF16_LITTLE_ENDIAN, buf, |
| PAGE_SIZE - 1); |
| buf[ret++] = '\n'; |
| return ret; |
| } |
| |
| #define CP2112_PSTR_ATTR(name, _report) \ |
| static struct cp2112_pstring_attribute dev_attr_##name = { \ |
| .attr = __ATTR(name, (S_IWUSR | S_IRUGO), pstr_show, pstr_store), \ |
| .report = _report, \ |
| }; |
| |
| CP2112_PSTR_ATTR(manufacturer, CP2112_MANUFACTURER_STRING); |
| CP2112_PSTR_ATTR(product, CP2112_PRODUCT_STRING); |
| CP2112_PSTR_ATTR(serial, CP2112_SERIAL_STRING); |
| |
| #undef CP2112_PSTR_ATTR |
| |
| static const struct attribute_group cp2112_attr_group = { |
| .attrs = (struct attribute *[]){ |
| &dev_attr_vendor_id.attr, |
| &dev_attr_product_id.attr, |
| &dev_attr_max_power.attr, |
| &dev_attr_power_mode.attr, |
| &dev_attr_release_version.attr, |
| &dev_attr_manufacturer.attr.attr, |
| &dev_attr_product.attr.attr, |
| &dev_attr_serial.attr.attr, |
| NULL |
| } |
| }; |
| |
| /* Chmoding our sysfs attributes is simply a way to expose which fields in the |
| * PROM have already been programmed. We do not depend on this preventing |
| * writing to these attributes since the CP2112 will simply ignore writes to |
| * already-programmed fields. This is why there is no sense in fixing this |
| * racy behaviour. |
| */ |
| static void chmod_sysfs_attrs(struct hid_device *hdev) |
| { |
| struct attribute **attr; |
| u8 buf[2]; |
| int ret; |
| |
| ret = cp2112_hid_get(hdev, CP2112_LOCK_BYTE, buf, sizeof(buf), |
| HID_FEATURE_REPORT); |
| if (ret != sizeof(buf)) { |
| hid_err(hdev, "error reading lock byte: %d\n", ret); |
| return; |
| } |
| |
| for (attr = cp2112_attr_group.attrs; *attr; ++attr) { |
| umode_t mode = (buf[1] & 1) ? S_IWUSR | S_IRUGO : S_IRUGO; |
| ret = sysfs_chmod_file(&hdev->dev.kobj, *attr, mode); |
| if (ret < 0) |
| hid_err(hdev, "error chmoding sysfs file %s\n", |
| (*attr)->name); |
| buf[1] >>= 1; |
| } |
| } |
| |
| static int cp2112_probe(struct hid_device *hdev, const struct hid_device_id *id) |
| { |
| struct cp2112_device *dev; |
| u8 buf[3]; |
| struct cp2112_smbus_config_report config; |
| int ret; |
| |
| ret = hid_parse(hdev); |
| if (ret) { |
| hid_err(hdev, "parse failed\n"); |
| return ret; |
| } |
| |
| ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW); |
| if (ret) { |
| hid_err(hdev, "hw start failed\n"); |
| return ret; |
| } |
| |
| ret = hid_hw_open(hdev); |
| if (ret) { |
| hid_err(hdev, "hw open failed\n"); |
| goto err_hid_stop; |
| } |
| |
| ret = hid_hw_power(hdev, PM_HINT_FULLON); |
| if (ret < 0) { |
| hid_err(hdev, "power management error: %d\n", ret); |
| goto err_hid_close; |
| } |
| |
| ret = cp2112_hid_get(hdev, CP2112_GET_VERSION_INFO, buf, sizeof(buf), |
| HID_FEATURE_REPORT); |
| if (ret != sizeof(buf)) { |
| hid_err(hdev, "error requesting version\n"); |
| if (ret >= 0) |
| ret = -EIO; |
| goto err_power_normal; |
| } |
| |
| hid_info(hdev, "Part Number: 0x%02X Device Version: 0x%02X\n", |
| buf[1], buf[2]); |
| |
| ret = cp2112_hid_get(hdev, CP2112_SMBUS_CONFIG, (u8 *)&config, |
| sizeof(config), HID_FEATURE_REPORT); |
| if (ret != sizeof(config)) { |
| hid_err(hdev, "error requesting SMBus config\n"); |
| if (ret >= 0) |
| ret = -EIO; |
| goto err_power_normal; |
| } |
| |
| config.retry_time = cpu_to_be16(1); |
| |
| ret = cp2112_hid_output(hdev, (u8 *)&config, sizeof(config), |
| HID_FEATURE_REPORT); |
| if (ret != sizeof(config)) { |
| hid_err(hdev, "error setting SMBus config\n"); |
| if (ret >= 0) |
| ret = -EIO; |
| goto err_power_normal; |
| } |
| |
| dev = kzalloc(sizeof(*dev), GFP_KERNEL); |
| if (!dev) { |
| ret = -ENOMEM; |
| goto err_power_normal; |
| } |
| |
| hid_set_drvdata(hdev, (void *)dev); |
| dev->hdev = hdev; |
| dev->adap.owner = THIS_MODULE; |
| dev->adap.class = I2C_CLASS_HWMON; |
| dev->adap.algo = &smbus_algorithm; |
| dev->adap.algo_data = dev; |
| dev->adap.dev.parent = &hdev->dev; |
| snprintf(dev->adap.name, sizeof(dev->adap.name), |
| "CP2112 SMBus Bridge on hiddev%d", hdev->minor); |
| init_waitqueue_head(&dev->wait); |
| |
| hid_device_io_start(hdev); |
| ret = i2c_add_adapter(&dev->adap); |
| hid_device_io_stop(hdev); |
| |
| if (ret) { |
| hid_err(hdev, "error registering i2c adapter\n"); |
| goto err_free_dev; |
| } |
| |
| hid_dbg(hdev, "adapter registered\n"); |
| |
| dev->gc.label = "cp2112_gpio"; |
| dev->gc.direction_input = cp2112_gpio_direction_input; |
| dev->gc.direction_output = cp2112_gpio_direction_output; |
| dev->gc.set = cp2112_gpio_set; |
| dev->gc.get = cp2112_gpio_get; |
| dev->gc.base = -1; |
| dev->gc.ngpio = 8; |
| dev->gc.can_sleep = 1; |
| dev->gc.dev = &hdev->dev; |
| |
| ret = gpiochip_add(&dev->gc); |
| if (ret < 0) { |
| hid_err(hdev, "error registering gpio chip\n"); |
| goto err_free_i2c; |
| } |
| |
| ret = sysfs_create_group(&hdev->dev.kobj, &cp2112_attr_group); |
| if (ret < 0) { |
| hid_err(hdev, "error creating sysfs attrs\n"); |
| goto err_gpiochip_remove; |
| } |
| |
| chmod_sysfs_attrs(hdev); |
| hid_hw_power(hdev, PM_HINT_NORMAL); |
| |
| return ret; |
| |
| err_gpiochip_remove: |
| gpiochip_remove(&dev->gc); |
| err_free_i2c: |
| i2c_del_adapter(&dev->adap); |
| err_free_dev: |
| kfree(dev); |
| err_power_normal: |
| hid_hw_power(hdev, PM_HINT_NORMAL); |
| err_hid_close: |
| hid_hw_close(hdev); |
| err_hid_stop: |
| hid_hw_stop(hdev); |
| return ret; |
| } |
| |
| static void cp2112_remove(struct hid_device *hdev) |
| { |
| struct cp2112_device *dev = hid_get_drvdata(hdev); |
| |
| sysfs_remove_group(&hdev->dev.kobj, &cp2112_attr_group); |
| gpiochip_remove(&dev->gc); |
| i2c_del_adapter(&dev->adap); |
| /* i2c_del_adapter has finished removing all i2c devices from our |
| * adapter. Well behaved devices should no longer call our cp2112_xfer |
| * and should have waited for any pending calls to finish. It has also |
| * waited for device_unregister(&adap->dev) to complete. Therefore we |
| * can safely free our struct cp2112_device. |
| */ |
| hid_hw_close(hdev); |
| hid_hw_stop(hdev); |
| kfree(dev); |
| } |
| |
| static int cp2112_raw_event(struct hid_device *hdev, struct hid_report *report, |
| u8 *data, int size) |
| { |
| struct cp2112_device *dev = hid_get_drvdata(hdev); |
| struct cp2112_xfer_status_report *xfer = (void *)data; |
| |
| switch (data[0]) { |
| case CP2112_TRANSFER_STATUS_RESPONSE: |
| hid_dbg(hdev, "xfer status: %02x %02x %04x %04x\n", |
| xfer->status0, xfer->status1, |
| be16_to_cpu(xfer->retries), be16_to_cpu(xfer->length)); |
| |
| switch (xfer->status0) { |
| case STATUS0_IDLE: |
| dev->xfer_status = -EAGAIN; |
| break; |
| case STATUS0_BUSY: |
| dev->xfer_status = -EBUSY; |
| break; |
| case STATUS0_COMPLETE: |
| dev->xfer_status = be16_to_cpu(xfer->length); |
| break; |
| case STATUS0_ERROR: |
| switch (xfer->status1) { |
| case STATUS1_TIMEOUT_NACK: |
| case STATUS1_TIMEOUT_BUS: |
| dev->xfer_status = -ETIMEDOUT; |
| break; |
| default: |
| dev->xfer_status = -EIO; |
| break; |
| } |
| break; |
| default: |
| dev->xfer_status = -EINVAL; |
| break; |
| } |
| |
| atomic_set(&dev->xfer_avail, 1); |
| break; |
| case CP2112_DATA_READ_RESPONSE: |
| hid_dbg(hdev, "read response: %02x %02x\n", data[1], data[2]); |
| |
| dev->read_length = data[2]; |
| if (dev->read_length > sizeof(dev->read_data)) |
| dev->read_length = sizeof(dev->read_data); |
| |
| memcpy(dev->read_data, &data[3], dev->read_length); |
| atomic_set(&dev->read_avail, 1); |
| break; |
| default: |
| hid_err(hdev, "unknown report\n"); |
| |
| return 0; |
| } |
| |
| wake_up_interruptible(&dev->wait); |
| return 1; |
| } |
| |
| static struct hid_driver cp2112_driver = { |
| .name = "cp2112", |
| .id_table = cp2112_devices, |
| .probe = cp2112_probe, |
| .remove = cp2112_remove, |
| .raw_event = cp2112_raw_event, |
| }; |
| |
| module_hid_driver(cp2112_driver); |
| MODULE_DESCRIPTION("Silicon Labs HID USB to SMBus master bridge"); |
| MODULE_AUTHOR("David Barksdale <dbarksdale@uplogix.com>"); |
| MODULE_LICENSE("GPL"); |
| |