drivers/net/wireless/rtlwifi/rtl8192se/rf.c - kernel/lockdown - Git at Google

 /******************************************************************************
  *
  * Copyright(c) 2009-2012  Realtek Corporation.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of version 2 of the GNU General Public License as
  * published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful, but WITHOUT
  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  * more details.
  *
  * You should have received a copy of the GNU General Public License along with
  * this program; if not, write to the Free Software Foundation, Inc.,
  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
  *
  * The full GNU General Public License is included in this distribution in the
  * file called LICENSE.
  *
  * Contact Information:
  * wlanfae <wlanfae@realtek.com>
  * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
  * Hsinchu 300, Taiwan.
  *
  * Larry Finger <Larry.Finger@lwfinger.net>
  *
  *****************************************************************************/

 #include "../wifi.h"
 #include "reg.h"
 #include "def.h"
 #include "phy.h"
 #include "rf.h"
 #include "dm.h"


 static void _rtl92s_get_powerbase(struct ieee80211_hw *hw, u8 *p_pwrlevel,
 				  u8 chnl, u32 *ofdmbase, u32 *mcsbase,
 				  u8 *p_final_pwridx)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
 	struct rtl_phy *rtlphy = &(rtlpriv->phy);
 	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
 	u32 pwrbase0, pwrbase1;
 	u8 legacy_pwrdiff = 0, ht20_pwrdiff = 0;
 	u8 i, pwrlevel[4];

 	for (i = 0; i < 2; i++)
 		pwrlevel[i] = p_pwrlevel[i];

 	/* We only care about the path A for legacy. */
 	if (rtlefuse->eeprom_version < 2) {
 		pwrbase0 = pwrlevel[0] + (rtlefuse->legacy_httxpowerdiff & 0xf);
 	} else if (rtlefuse->eeprom_version >= 2) {
 		legacy_pwrdiff = rtlefuse->txpwr_legacyhtdiff
 						[RF90_PATH_A][chnl - 1];

 		/* For legacy OFDM, tx pwr always > HT OFDM pwr.
 		 * We do not care Path B
 		 * legacy OFDM pwr diff. NO BB register
 		 * to notify HW. */
 		pwrbase0 = pwrlevel[0] + legacy_pwrdiff;
 	}

 	pwrbase0 = (pwrbase0 << 24) | (pwrbase0 << 16) | (pwrbase0 << 8) |
 		    pwrbase0;
 	*ofdmbase = pwrbase0;

 	/* MCS rates */
 	if (rtlefuse->eeprom_version >= 2) {
 		/* Check HT20 to HT40 diff	*/
 		if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20) {
 			for (i = 0; i < 2; i++) {
 				/* rf-A, rf-B */
 				/* HT 20<->40 pwr diff */
 				ht20_pwrdiff = rtlefuse->txpwr_ht20diff
 							[i][chnl - 1];

 				if (ht20_pwrdiff < 8) /* 0~+7 */
 					pwrlevel[i] += ht20_pwrdiff;
 				else /* index8-15=-8~-1 */
 					pwrlevel[i] -= (16 - ht20_pwrdiff);
 			}
 		}
 	}

 	/* use index of rf-A */
 	pwrbase1 = pwrlevel[0];
 	pwrbase1 = (pwrbase1 << 24) | (pwrbase1 << 16) | (pwrbase1 << 8) |
 				pwrbase1;
 	*mcsbase = pwrbase1;

 	/* The following is for Antenna
 	 * diff from Ant-B to Ant-A */
 	p_final_pwridx[0] = pwrlevel[0];
 	p_final_pwridx[1] = pwrlevel[1];

 	switch (rtlefuse->eeprom_regulatory) {
 	case 3:
 		/* The following is for calculation
 		 * of the power diff for Ant-B to Ant-A. */
 		if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) {
 			p_final_pwridx[0] += rtlefuse->pwrgroup_ht40
 						[RF90_PATH_A][
 						chnl - 1];
 			p_final_pwridx[1] += rtlefuse->pwrgroup_ht40
 						[RF90_PATH_B][
 						chnl - 1];
 		} else {
 			p_final_pwridx[0] += rtlefuse->pwrgroup_ht20
 						[RF90_PATH_A][
 						chnl - 1];
 			p_final_pwridx[1] += rtlefuse->pwrgroup_ht20
 						[RF90_PATH_B][
 						chnl - 1];
 		}
 		break;
 	default:
 		break;
 	}

 	if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) {
 		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
 			 "40MHz finalpwr_idx (A / B) = 0x%x / 0x%x\n",
 			 p_final_pwridx[0], p_final_pwridx[1]);
 	} else {
 		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
 			 "20MHz finalpwr_idx (A / B) = 0x%x / 0x%x\n",
 			 p_final_pwridx[0], p_final_pwridx[1]);
 	}
 }

 static void _rtl92s_set_antennadiff(struct ieee80211_hw *hw,
 				    u8 *p_final_pwridx)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
 	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
 	struct rtl_phy *rtlphy = &(rtlpriv->phy);
 	char ant_pwr_diff = 0;
 	u32	u4reg_val = 0;

 	if (rtlphy->rf_type == RF_2T2R) {
 		ant_pwr_diff = p_final_pwridx[1] - p_final_pwridx[0];

 		/* range is from 7~-8,
 		 * index = 0x0~0xf */
 		if (ant_pwr_diff > 7)
 			ant_pwr_diff = 7;
 		if (ant_pwr_diff < -8)
 			ant_pwr_diff = -8;

 		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
 			 "Antenna Diff from RF-B to RF-A = %d (0x%x)\n",
 			 ant_pwr_diff, ant_pwr_diff & 0xf);

 		ant_pwr_diff &= 0xf;
 	}

 	/* Antenna TX power difference */
 	rtlefuse->antenna_txpwdiff[2] = 0;/* RF-D, don't care */
 	rtlefuse->antenna_txpwdiff[1] = 0;/* RF-C, don't care */
 	rtlefuse->antenna_txpwdiff[0] = (u8)(ant_pwr_diff);	/* RF-B */

 	u4reg_val = rtlefuse->antenna_txpwdiff[2] << 8 |
 				rtlefuse->antenna_txpwdiff[1] << 4 |
 				rtlefuse->antenna_txpwdiff[0];

 	rtl_set_bbreg(hw, RFPGA0_TXGAINSTAGE, (BXBTXAGC | BXCTXAGC | BXDTXAGC),
 		      u4reg_val);

 	RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, "Write BCD-Diff(0x%x) = 0x%x\n",
 		 RFPGA0_TXGAINSTAGE, u4reg_val);
 }

 static void _rtl92s_get_txpower_writeval_byregulatory(struct ieee80211_hw *hw,
 						      u8 chnl, u8 index,
 						      u32 pwrbase0,
 						      u32 pwrbase1,
 						      u32 *p_outwrite_val)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
 	struct rtl_phy *rtlphy = &(rtlpriv->phy);
 	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
 	u8 i, chnlgroup, pwrdiff_limit[4];
 	u32 writeval, customer_limit;

 	/* Index 0 & 1= legacy OFDM, 2-5=HT_MCS rate */
 	switch (rtlefuse->eeprom_regulatory) {
 	case 0:
 		/* Realtek better performance increase power diff
 		 * defined by Realtek for large power */
 		chnlgroup = 0;

 		writeval = rtlphy->mcs_offset[chnlgroup][index] +
 				((index < 2) ? pwrbase0 : pwrbase1);

 		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
 			 "RTK better performance, writeval = 0x%x\n", writeval);
 		break;
 	case 1:
 		/* Realtek regulatory increase power diff defined
 		 * by Realtek for regulatory */
 		if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) {
 			writeval = ((index < 2) ? pwrbase0 : pwrbase1);

 			RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
 				 "Realtek regulatory, 40MHz, writeval = 0x%x\n",
 				 writeval);
 		} else {
 			if (rtlphy->pwrgroup_cnt == 1)
 				chnlgroup = 0;

 			if (rtlphy->pwrgroup_cnt >= 3) {
 				if (chnl <= 3)
 					chnlgroup = 0;
 				else if (chnl >= 4 && chnl <= 8)
 					chnlgroup = 1;
 				else if (chnl > 8)
 					chnlgroup = 2;
 				if (rtlphy->pwrgroup_cnt == 4)
 					chnlgroup++;
 			}

 			writeval = rtlphy->mcs_offset[chnlgroup][index]
 					+ ((index < 2) ?
 					pwrbase0 : pwrbase1);

 			RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
 				 "Realtek regulatory, 20MHz, writeval = 0x%x\n",
 				 writeval);
 		}
 		break;
 	case 2:
 		/* Better regulatory don't increase any power diff */
 		writeval = ((index < 2) ? pwrbase0 : pwrbase1);
 		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
 			 "Better regulatory, writeval = 0x%x\n", writeval);
 		break;
 	case 3:
 		/* Customer defined power diff. increase power diff
 		  defined by customer. */
 		chnlgroup = 0;

 		if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) {
 			RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
 				 "customer's limit, 40MHz = 0x%x\n",
 				 rtlefuse->pwrgroup_ht40
 				 [RF90_PATH_A][chnl - 1]);
 		} else {
 			RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
 				 "customer's limit, 20MHz = 0x%x\n",
 				 rtlefuse->pwrgroup_ht20
 				 [RF90_PATH_A][chnl - 1]);
 		}

 		for (i = 0; i < 4; i++) {
 			pwrdiff_limit[i] = (u8)((rtlphy->mcs_offset
 				[chnlgroup][index] & (0x7f << (i * 8)))
 				>> (i * 8));

 			if (rtlphy->current_chan_bw ==
 			    HT_CHANNEL_WIDTH_20_40) {
 				if (pwrdiff_limit[i] >
 				    rtlefuse->pwrgroup_ht40
 				    [RF90_PATH_A][chnl - 1]) {
 					pwrdiff_limit[i] =
 					  rtlefuse->pwrgroup_ht40
 					  [RF90_PATH_A][chnl - 1];
 				}
 			} else {
 				if (pwrdiff_limit[i] >
 				    rtlefuse->pwrgroup_ht20
 				    [RF90_PATH_A][chnl - 1]) {
 					pwrdiff_limit[i] =
 					    rtlefuse->pwrgroup_ht20
 					    [RF90_PATH_A][chnl - 1];
 				}
 			}
 		}

 		customer_limit = (pwrdiff_limit[3] << 24) |
 				(pwrdiff_limit[2] << 16) |
 				(pwrdiff_limit[1] << 8) |
 				(pwrdiff_limit[0]);
 		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
 			 "Customer's limit = 0x%x\n", customer_limit);

 		writeval = customer_limit + ((index < 2) ?
 					     pwrbase0 : pwrbase1);
 		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
 			 "Customer, writeval = 0x%x\n", writeval);
 		break;
 	default:
 		chnlgroup = 0;
 		writeval = rtlphy->mcs_offset[chnlgroup][index] +
 				((index < 2) ? pwrbase0 : pwrbase1);
 		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
 			 "RTK better performance, writeval = 0x%x\n", writeval);
 		break;
 	}

 	if (rtlpriv->dm.dynamic_txhighpower_lvl == TX_HIGH_PWR_LEVEL_LEVEL1)
 		writeval = 0x10101010;
 	else if (rtlpriv->dm.dynamic_txhighpower_lvl ==
 		 TX_HIGH_PWR_LEVEL_LEVEL2)
 		writeval = 0x0;

 	*p_outwrite_val = writeval;

 }

 static void _rtl92s_write_ofdm_powerreg(struct ieee80211_hw *hw,
 					u8 index, u32 val)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
 	struct rtl_phy *rtlphy = &(rtlpriv->phy);
 	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
 	u16 regoffset[6] = {0xe00, 0xe04, 0xe10, 0xe14, 0xe18, 0xe1c};
 	u8 i, rfa_pwr[4];
 	u8 rfa_lower_bound = 0, rfa_upper_bound = 0, rf_pwr_diff = 0;
 	u32 writeval = val;

 	/* If path A and Path B coexist, we must limit Path A tx power.
 	 * Protect Path B pwr over or under flow. We need to calculate
 	 * upper and lower bound of path A tx power. */
 	if (rtlphy->rf_type == RF_2T2R) {
 		rf_pwr_diff = rtlefuse->antenna_txpwdiff[0];

 		/* Diff=-8~-1 */
 		if (rf_pwr_diff >= 8) {
 			/* Prevent underflow!! */
 			rfa_lower_bound = 0x10 - rf_pwr_diff;
 		/* if (rf_pwr_diff >= 0) Diff = 0-7 */
 		} else {
 			rfa_upper_bound = RF6052_MAX_TX_PWR - rf_pwr_diff;
 		}
 	}

 	for (i = 0; i < 4; i++) {
 		rfa_pwr[i] = (u8)((writeval & (0x7f << (i * 8))) >> (i * 8));
 		if (rfa_pwr[i]  > RF6052_MAX_TX_PWR)
 			rfa_pwr[i]  = RF6052_MAX_TX_PWR;

 		/* If path A and Path B coexist, we must limit Path A tx power.
 		 * Protect Path B pwr over or under flow. We need to calculate
 		 * upper and lower bound of path A tx power. */
 		if (rtlphy->rf_type == RF_2T2R) {
 			/* Diff=-8~-1 */
 			if (rf_pwr_diff >= 8) {
 				/* Prevent underflow!! */
 				if (rfa_pwr[i] < rfa_lower_bound)
 					rfa_pwr[i] = rfa_lower_bound;
 			/* Diff = 0-7 */
 			} else if (rf_pwr_diff >= 1) {
 				/* Prevent overflow */
 				if (rfa_pwr[i] > rfa_upper_bound)
 					rfa_pwr[i] = rfa_upper_bound;
 			}
 		}

 	}

 	writeval = (rfa_pwr[3] << 24) | (rfa_pwr[2] << 16) | (rfa_pwr[1] << 8) |
 				rfa_pwr[0];

 	rtl_set_bbreg(hw, regoffset[index], 0x7f7f7f7f, writeval);
 }

 void rtl92s_phy_rf6052_set_ofdmtxpower(struct ieee80211_hw *hw,
 				       u8 *p_pwrlevel, u8 chnl)
 {
 	u32 writeval, pwrbase0, pwrbase1;
 	u8 index = 0;
 	u8 finalpwr_idx[4];

 	_rtl92s_get_powerbase(hw, p_pwrlevel, chnl, &pwrbase0, &pwrbase1,
 			&finalpwr_idx[0]);
 	_rtl92s_set_antennadiff(hw, &finalpwr_idx[0]);

 	for (index = 0; index < 6; index++) {
 		_rtl92s_get_txpower_writeval_byregulatory(hw, chnl, index,
 				pwrbase0, pwrbase1, &writeval);

 		_rtl92s_write_ofdm_powerreg(hw, index, writeval);
 	}
 }

 void rtl92s_phy_rf6052_set_ccktxpower(struct ieee80211_hw *hw, u8 pwrlevel)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
 	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
 	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
 	u32 txagc = 0;
 	bool dont_inc_cck_or_turboscanoff = false;

 	if (((rtlefuse->eeprom_version >= 2) &&
 	      (rtlefuse->txpwr_safetyflag == 1)) ||
 	      ((rtlefuse->eeprom_version >= 2) &&
 	      (rtlefuse->eeprom_regulatory != 0)))
 		dont_inc_cck_or_turboscanoff = true;

 	if (mac->act_scanning) {
 		txagc = 0x3f;
 		if (dont_inc_cck_or_turboscanoff)
 			txagc = pwrlevel;
 	} else {
 		txagc = pwrlevel;

 		if (rtlpriv->dm.dynamic_txhighpower_lvl ==
 		    TX_HIGH_PWR_LEVEL_LEVEL1)
 			txagc = 0x10;
 		else if (rtlpriv->dm.dynamic_txhighpower_lvl ==
 			TX_HIGH_PWR_LEVEL_LEVEL2)
 			txagc = 0x0;
 	}

 	if (txagc > RF6052_MAX_TX_PWR)
 		txagc = RF6052_MAX_TX_PWR;

 	rtl_set_bbreg(hw, RTXAGC_CCK_MCS32, BTX_AGCRATECCK, txagc);

 }

 bool rtl92s_phy_rf6052_config(struct ieee80211_hw *hw)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
 	struct rtl_phy *rtlphy = &(rtlpriv->phy);
 	u32 u4reg_val = 0;
 	u8 rfpath;
 	bool rtstatus = true;
 	struct bb_reg_def *pphyreg;

 	/* Initialize RF */
 	for (rfpath = 0; rfpath < rtlphy->num_total_rfpath; rfpath++) {

 		pphyreg = &rtlphy->phyreg_def[rfpath];

 		/* Store original RFENV control type */
 		switch (rfpath) {
 		case RF90_PATH_A:
 		case RF90_PATH_C:
 			u4reg_val = rtl92s_phy_query_bb_reg(hw,
 							    pphyreg->rfintfs,
 							    BRFSI_RFENV);
 			break;
 		case RF90_PATH_B:
 		case RF90_PATH_D:
 			u4reg_val = rtl92s_phy_query_bb_reg(hw,
 							    pphyreg->rfintfs,
 							    BRFSI_RFENV << 16);
 			break;
 		}

 		/* Set RF_ENV enable */
 		rtl92s_phy_set_bb_reg(hw, pphyreg->rfintfe,
 				      BRFSI_RFENV << 16, 0x1);

 		/* Set RF_ENV output high */
 		rtl92s_phy_set_bb_reg(hw, pphyreg->rfintfo, BRFSI_RFENV, 0x1);

 		/* Set bit number of Address and Data for RF register */
 		rtl92s_phy_set_bb_reg(hw, pphyreg->rfhssi_para2,
 				B3WIRE_ADDRESSLENGTH, 0x0);
 		rtl92s_phy_set_bb_reg(hw, pphyreg->rfhssi_para2,
 				B3WIRE_DATALENGTH, 0x0);

 		/* Initialize RF fom connfiguration file */
 		switch (rfpath) {
 		case RF90_PATH_A:
 			rtstatus = rtl92s_phy_config_rf(hw,
 						(enum radio_path)rfpath);
 			break;
 		case RF90_PATH_B:
 			rtstatus = rtl92s_phy_config_rf(hw,
 						(enum radio_path)rfpath);
 			break;
 		case RF90_PATH_C:
 			break;
 		case RF90_PATH_D:
 			break;
 		}

 		/* Restore RFENV control type */
 		switch (rfpath) {
 		case RF90_PATH_A:
 		case RF90_PATH_C:
 			rtl92s_phy_set_bb_reg(hw, pphyreg->rfintfs, BRFSI_RFENV,
 					      u4reg_val);
 			break;
 		case RF90_PATH_B:
 		case RF90_PATH_D:
 			rtl92s_phy_set_bb_reg(hw, pphyreg->rfintfs,
 					      BRFSI_RFENV << 16,
 					      u4reg_val);
 			break;
 		}

 		if (!rtstatus) {
 			pr_err("Radio[%d] Fail!!\n", rfpath);
 			goto fail;
 		}

 	}

 	return rtstatus;

 fail:
 	return rtstatus;
 }

 void rtl92s_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
 	struct rtl_phy *rtlphy = &(rtlpriv->phy);

 	switch (bandwidth) {
 	case HT_CHANNEL_WIDTH_20:
 		rtlphy->rfreg_chnlval[0] = ((rtlphy->rfreg_chnlval[0] &
 					   0xfffff3ff) | 0x0400);
 		rtl_set_rfreg(hw, RF90_PATH_A, RF_CHNLBW, RFREG_OFFSET_MASK,
 					rtlphy->rfreg_chnlval[0]);
 		break;
 	case HT_CHANNEL_WIDTH_20_40:
 		rtlphy->rfreg_chnlval[0] = ((rtlphy->rfreg_chnlval[0] &
 					    0xfffff3ff));
 		rtl_set_rfreg(hw, RF90_PATH_A, RF_CHNLBW, RFREG_OFFSET_MASK,
 					rtlphy->rfreg_chnlval[0]);
 		break;
 	default:
 		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
 			 "unknown bandwidth: %#X\n", bandwidth);
 		break;
 	}
 }
	/******************************************************************************
	*
	* Copyright(c) 2009-2012 Realtek Corporation.
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms of version 2 of the GNU General Public License as
	* published by the Free Software Foundation.
	*
	* This program is distributed in the hope that it will be useful, but WITHOUT
	* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
	* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
	* more details.
	*
	* You should have received a copy of the GNU General Public License along with
	* this program; if not, write to the Free Software Foundation, Inc.,
	* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
	*
	* The full GNU General Public License is included in this distribution in the
	* file called LICENSE.
	*
	* Contact Information:
	* wlanfae <wlanfae@realtek.com>
	* Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
	* Hsinchu 300, Taiwan.
	*
	* Larry Finger <Larry.Finger@lwfinger.net>
	*
	*****************************************************************************/

	#include "../wifi.h"
	#include "reg.h"
	#include "def.h"
	#include "phy.h"
	#include "rf.h"
	#include "dm.h"


	static void _rtl92s_get_powerbase(struct ieee80211_hw hw, u8 p_pwrlevel,
	u8 chnl, u32 ofdmbase, u32 mcsbase,
	u8 *p_final_pwridx)
	{
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	struct rtl_phy *rtlphy = &(rtlpriv->phy);
	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
	u32 pwrbase0, pwrbase1;
	u8 legacy_pwrdiff = 0, ht20_pwrdiff = 0;
	u8 i, pwrlevel[4];

	for (i = 0; i < 2; i++)
	pwrlevel[i] = p_pwrlevel[i];

	/* We only care about the path A for legacy. */
	if (rtlefuse->eeprom_version < 2) {
	pwrbase0 = pwrlevel[0] + (rtlefuse->legacy_httxpowerdiff & 0xf);
	} else if (rtlefuse->eeprom_version >= 2) {
	legacy_pwrdiff = rtlefuse->txpwr_legacyhtdiff
	[RF90_PATH_A][chnl - 1];

	/* For legacy OFDM, tx pwr always > HT OFDM pwr.
	* We do not care Path B
	* legacy OFDM pwr diff. NO BB register
	* to notify HW. */
	pwrbase0 = pwrlevel[0] + legacy_pwrdiff;
	}

	pwrbase0 = (pwrbase0 << 24) \| (pwrbase0 << 16) \| (pwrbase0 << 8) \|
	pwrbase0;
	*ofdmbase = pwrbase0;

	/* MCS rates */
	if (rtlefuse->eeprom_version >= 2) {
	/* Check HT20 to HT40 diff */
	if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20) {
	for (i = 0; i < 2; i++) {
	/* rf-A, rf-B */
	/* HT 20<->40 pwr diff */
	ht20_pwrdiff = rtlefuse->txpwr_ht20diff
	[i][chnl - 1];

	if (ht20_pwrdiff < 8) /* 0~+7 */
	pwrlevel[i] += ht20_pwrdiff;
	else /* index8-15=-8~-1 */
	pwrlevel[i] -= (16 - ht20_pwrdiff);
	}
	}
	}

	/* use index of rf-A */
	pwrbase1 = pwrlevel[0];
	pwrbase1 = (pwrbase1 << 24) \| (pwrbase1 << 16) \| (pwrbase1 << 8) \|
	pwrbase1;
	*mcsbase = pwrbase1;

	/* The following is for Antenna
	* diff from Ant-B to Ant-A */
	p_final_pwridx[0] = pwrlevel[0];
	p_final_pwridx[1] = pwrlevel[1];

	switch (rtlefuse->eeprom_regulatory) {
	case 3:
	/* The following is for calculation
	* of the power diff for Ant-B to Ant-A. */
	if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) {
	p_final_pwridx[0] += rtlefuse->pwrgroup_ht40
	[RF90_PATH_A][
	chnl - 1];
	p_final_pwridx[1] += rtlefuse->pwrgroup_ht40
	[RF90_PATH_B][
	chnl - 1];
	} else {
	p_final_pwridx[0] += rtlefuse->pwrgroup_ht20
	[RF90_PATH_A][
	chnl - 1];
	p_final_pwridx[1] += rtlefuse->pwrgroup_ht20
	[RF90_PATH_B][
	chnl - 1];
	}
	break;
	default:
	break;
	}

	if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) {
	RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
	"40MHz finalpwr_idx (A / B) = 0x%x / 0x%x\n",
	p_final_pwridx[0], p_final_pwridx[1]);
	} else {
	RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
	"20MHz finalpwr_idx (A / B) = 0x%x / 0x%x\n",
	p_final_pwridx[0], p_final_pwridx[1]);
	}
	}

	static void _rtl92s_set_antennadiff(struct ieee80211_hw *hw,
	u8 *p_final_pwridx)
	{
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
	struct rtl_phy *rtlphy = &(rtlpriv->phy);
	char ant_pwr_diff = 0;
	u32 u4reg_val = 0;

	if (rtlphy->rf_type == RF_2T2R) {
	ant_pwr_diff = p_final_pwridx[1] - p_final_pwridx[0];

	/* range is from 7~-8,
	* index = 0x0~0xf */
	if (ant_pwr_diff > 7)
	ant_pwr_diff = 7;
	if (ant_pwr_diff < -8)
	ant_pwr_diff = -8;

	RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
	"Antenna Diff from RF-B to RF-A = %d (0x%x)\n",
	ant_pwr_diff, ant_pwr_diff & 0xf);

	ant_pwr_diff &= 0xf;
	}

	/* Antenna TX power difference */
	rtlefuse->antenna_txpwdiff[2] = 0;/* RF-D, don't care */
	rtlefuse->antenna_txpwdiff[1] = 0;/* RF-C, don't care */
	rtlefuse->antenna_txpwdiff[0] = (u8)(ant_pwr_diff); /* RF-B */

	u4reg_val = rtlefuse->antenna_txpwdiff[2] << 8 \|
	rtlefuse->antenna_txpwdiff[1] << 4 \|
	rtlefuse->antenna_txpwdiff[0];

	rtl_set_bbreg(hw, RFPGA0_TXGAINSTAGE, (BXBTXAGC \| BXCTXAGC \| BXDTXAGC),
	u4reg_val);

	RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, "Write BCD-Diff(0x%x) = 0x%x\n",
	RFPGA0_TXGAINSTAGE, u4reg_val);
	}

	static void _rtl92s_get_txpower_writeval_byregulatory(struct ieee80211_hw *hw,
	u8 chnl, u8 index,
	u32 pwrbase0,
	u32 pwrbase1,
	u32 *p_outwrite_val)
	{
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	struct rtl_phy *rtlphy = &(rtlpriv->phy);
	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
	u8 i, chnlgroup, pwrdiff_limit[4];
	u32 writeval, customer_limit;

	/* Index 0 & 1= legacy OFDM, 2-5=HT_MCS rate */
	switch (rtlefuse->eeprom_regulatory) {
	case 0:
	/* Realtek better performance increase power diff
	* defined by Realtek for large power */
	chnlgroup = 0;

	writeval = rtlphy->mcs_offset[chnlgroup][index] +
	((index < 2) ? pwrbase0 : pwrbase1);

	RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
	"RTK better performance, writeval = 0x%x\n", writeval);
	break;
	case 1:
	/* Realtek regulatory increase power diff defined
	* by Realtek for regulatory */
	if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) {
	writeval = ((index < 2) ? pwrbase0 : pwrbase1);

	RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
	"Realtek regulatory, 40MHz, writeval = 0x%x\n",
	writeval);
	} else {
	if (rtlphy->pwrgroup_cnt == 1)
	chnlgroup = 0;

	if (rtlphy->pwrgroup_cnt >= 3) {
	if (chnl <= 3)
	chnlgroup = 0;
	else if (chnl >= 4 && chnl <= 8)
	chnlgroup = 1;
	else if (chnl > 8)
	chnlgroup = 2;
	if (rtlphy->pwrgroup_cnt == 4)
	chnlgroup++;
	}

	writeval = rtlphy->mcs_offset[chnlgroup][index]
	+ ((index < 2) ?
	pwrbase0 : pwrbase1);

	RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
	"Realtek regulatory, 20MHz, writeval = 0x%x\n",
	writeval);
	}
	break;
	case 2:
	/* Better regulatory don't increase any power diff */
	writeval = ((index < 2) ? pwrbase0 : pwrbase1);
	RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
	"Better regulatory, writeval = 0x%x\n", writeval);
	break;
	case 3:
	/* Customer defined power diff. increase power diff
	defined by customer. */
	chnlgroup = 0;

	if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) {
	RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
	"customer's limit, 40MHz = 0x%x\n",
	rtlefuse->pwrgroup_ht40
	[RF90_PATH_A][chnl - 1]);
	} else {
	RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
	"customer's limit, 20MHz = 0x%x\n",
	rtlefuse->pwrgroup_ht20
	[RF90_PATH_A][chnl - 1]);
	}

	for (i = 0; i < 4; i++) {
	pwrdiff_limit[i] = (u8)((rtlphy->mcs_offset
	[chnlgroup][index] & (0x7f << (i * 8)))
	>> (i * 8));

	if (rtlphy->current_chan_bw ==
	HT_CHANNEL_WIDTH_20_40) {
	if (pwrdiff_limit[i] >
	rtlefuse->pwrgroup_ht40
	[RF90_PATH_A][chnl - 1]) {
	pwrdiff_limit[i] =
	rtlefuse->pwrgroup_ht40
	[RF90_PATH_A][chnl - 1];
	}
	} else {
	if (pwrdiff_limit[i] >
	rtlefuse->pwrgroup_ht20
	[RF90_PATH_A][chnl - 1]) {
	pwrdiff_limit[i] =
	rtlefuse->pwrgroup_ht20
	[RF90_PATH_A][chnl - 1];
	}
	}
	}

	customer_limit = (pwrdiff_limit[3] << 24) \|
	(pwrdiff_limit[2] << 16) \|
	(pwrdiff_limit[1] << 8) \|
	(pwrdiff_limit[0]);
	RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
	"Customer's limit = 0x%x\n", customer_limit);

	writeval = customer_limit + ((index < 2) ?
	pwrbase0 : pwrbase1);
	RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
	"Customer, writeval = 0x%x\n", writeval);
	break;
	default:
	chnlgroup = 0;
	writeval = rtlphy->mcs_offset[chnlgroup][index] +
	((index < 2) ? pwrbase0 : pwrbase1);
	RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
	"RTK better performance, writeval = 0x%x\n", writeval);
	break;
	}

	if (rtlpriv->dm.dynamic_txhighpower_lvl == TX_HIGH_PWR_LEVEL_LEVEL1)
	writeval = 0x10101010;
	else if (rtlpriv->dm.dynamic_txhighpower_lvl ==
	TX_HIGH_PWR_LEVEL_LEVEL2)
	writeval = 0x0;

	*p_outwrite_val = writeval;

	}

	static void _rtl92s_write_ofdm_powerreg(struct ieee80211_hw *hw,
	u8 index, u32 val)
	{
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	struct rtl_phy *rtlphy = &(rtlpriv->phy);
	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
	u16 regoffset[6] = {0xe00, 0xe04, 0xe10, 0xe14, 0xe18, 0xe1c};
	u8 i, rfa_pwr[4];
	u8 rfa_lower_bound = 0, rfa_upper_bound = 0, rf_pwr_diff = 0;
	u32 writeval = val;

	/* If path A and Path B coexist, we must limit Path A tx power.
	* Protect Path B pwr over or under flow. We need to calculate
	* upper and lower bound of path A tx power. */
	if (rtlphy->rf_type == RF_2T2R) {
	rf_pwr_diff = rtlefuse->antenna_txpwdiff[0];

	/* Diff=-8~-1 */
	if (rf_pwr_diff >= 8) {
	/* Prevent underflow!! */
	rfa_lower_bound = 0x10 - rf_pwr_diff;
	/* if (rf_pwr_diff >= 0) Diff = 0-7 */
	} else {
	rfa_upper_bound = RF6052_MAX_TX_PWR - rf_pwr_diff;
	}
	}

	for (i = 0; i < 4; i++) {
	rfa_pwr[i] = (u8)((writeval & (0x7f << (i * 8))) >> (i * 8));
	if (rfa_pwr[i] > RF6052_MAX_TX_PWR)
	rfa_pwr[i] = RF6052_MAX_TX_PWR;

	/* If path A and Path B coexist, we must limit Path A tx power.
	* Protect Path B pwr over or under flow. We need to calculate
	* upper and lower bound of path A tx power. */
	if (rtlphy->rf_type == RF_2T2R) {
	/* Diff=-8~-1 */
	if (rf_pwr_diff >= 8) {
	/* Prevent underflow!! */
	if (rfa_pwr[i] < rfa_lower_bound)
	rfa_pwr[i] = rfa_lower_bound;
	/* Diff = 0-7 */
	} else if (rf_pwr_diff >= 1) {
	/* Prevent overflow */
	if (rfa_pwr[i] > rfa_upper_bound)
	rfa_pwr[i] = rfa_upper_bound;
	}
	}

	}

	writeval = (rfa_pwr[3] << 24) \| (rfa_pwr[2] << 16) \| (rfa_pwr[1] << 8) \|
	rfa_pwr[0];

	rtl_set_bbreg(hw, regoffset[index], 0x7f7f7f7f, writeval);
	}

	void rtl92s_phy_rf6052_set_ofdmtxpower(struct ieee80211_hw *hw,
	u8 *p_pwrlevel, u8 chnl)
	{
	u32 writeval, pwrbase0, pwrbase1;
	u8 index = 0;
	u8 finalpwr_idx[4];

	_rtl92s_get_powerbase(hw, p_pwrlevel, chnl, &pwrbase0, &pwrbase1,
	&finalpwr_idx[0]);
	_rtl92s_set_antennadiff(hw, &finalpwr_idx[0]);

	for (index = 0; index < 6; index++) {
	_rtl92s_get_txpower_writeval_byregulatory(hw, chnl, index,
	pwrbase0, pwrbase1, &writeval);

	_rtl92s_write_ofdm_powerreg(hw, index, writeval);
	}
	}

	void rtl92s_phy_rf6052_set_ccktxpower(struct ieee80211_hw *hw, u8 pwrlevel)
	{
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
	u32 txagc = 0;
	bool dont_inc_cck_or_turboscanoff = false;

	if (((rtlefuse->eeprom_version >= 2) &&
	(rtlefuse->txpwr_safetyflag == 1)) \|\|
	((rtlefuse->eeprom_version >= 2) &&
	(rtlefuse->eeprom_regulatory != 0)))
	dont_inc_cck_or_turboscanoff = true;

	if (mac->act_scanning) {
	txagc = 0x3f;
	if (dont_inc_cck_or_turboscanoff)
	txagc = pwrlevel;
	} else {
	txagc = pwrlevel;

	if (rtlpriv->dm.dynamic_txhighpower_lvl ==
	TX_HIGH_PWR_LEVEL_LEVEL1)
	txagc = 0x10;
	else if (rtlpriv->dm.dynamic_txhighpower_lvl ==
	TX_HIGH_PWR_LEVEL_LEVEL2)
	txagc = 0x0;
	}

	if (txagc > RF6052_MAX_TX_PWR)
	txagc = RF6052_MAX_TX_PWR;

	rtl_set_bbreg(hw, RTXAGC_CCK_MCS32, BTX_AGCRATECCK, txagc);

	}

	bool rtl92s_phy_rf6052_config(struct ieee80211_hw *hw)
	{
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	struct rtl_phy *rtlphy = &(rtlpriv->phy);
	u32 u4reg_val = 0;
	u8 rfpath;
	bool rtstatus = true;
	struct bb_reg_def *pphyreg;

	/* Initialize RF */
	for (rfpath = 0; rfpath < rtlphy->num_total_rfpath; rfpath++) {

	pphyreg = &rtlphy->phyreg_def[rfpath];

	/* Store original RFENV control type */
	switch (rfpath) {
	case RF90_PATH_A:
	case RF90_PATH_C:
	u4reg_val = rtl92s_phy_query_bb_reg(hw,
	pphyreg->rfintfs,
	BRFSI_RFENV);
	break;
	case RF90_PATH_B:
	case RF90_PATH_D:
	u4reg_val = rtl92s_phy_query_bb_reg(hw,
	pphyreg->rfintfs,
	BRFSI_RFENV << 16);
	break;
	}

	/* Set RF_ENV enable */
	rtl92s_phy_set_bb_reg(hw, pphyreg->rfintfe,
	BRFSI_RFENV << 16, 0x1);

	/* Set RF_ENV output high */
	rtl92s_phy_set_bb_reg(hw, pphyreg->rfintfo, BRFSI_RFENV, 0x1);

	/* Set bit number of Address and Data for RF register */
	rtl92s_phy_set_bb_reg(hw, pphyreg->rfhssi_para2,
	B3WIRE_ADDRESSLENGTH, 0x0);
	rtl92s_phy_set_bb_reg(hw, pphyreg->rfhssi_para2,
	B3WIRE_DATALENGTH, 0x0);

	/* Initialize RF fom connfiguration file */
	switch (rfpath) {
	case RF90_PATH_A:
	rtstatus = rtl92s_phy_config_rf(hw,
	(enum radio_path)rfpath);
	break;
	case RF90_PATH_B:
	rtstatus = rtl92s_phy_config_rf(hw,
	(enum radio_path)rfpath);
	break;
	case RF90_PATH_C:
	break;
	case RF90_PATH_D:
	break;
	}

	/* Restore RFENV control type */
	switch (rfpath) {
	case RF90_PATH_A:
	case RF90_PATH_C:
	rtl92s_phy_set_bb_reg(hw, pphyreg->rfintfs, BRFSI_RFENV,
	u4reg_val);
	break;
	case RF90_PATH_B:
	case RF90_PATH_D:
	rtl92s_phy_set_bb_reg(hw, pphyreg->rfintfs,
	BRFSI_RFENV << 16,
	u4reg_val);
	break;
	}

	if (!rtstatus) {
	pr_err("Radio[%d] Fail!!\n", rfpath);
	goto fail;
	}

	}

	return rtstatus;

	fail:
	return rtstatus;
	}

	void rtl92s_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
	{
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	struct rtl_phy *rtlphy = &(rtlpriv->phy);

	switch (bandwidth) {
	case HT_CHANNEL_WIDTH_20:
	rtlphy->rfreg_chnlval[0] = ((rtlphy->rfreg_chnlval[0] &
	0xfffff3ff) \| 0x0400);
	rtl_set_rfreg(hw, RF90_PATH_A, RF_CHNLBW, RFREG_OFFSET_MASK,
	rtlphy->rfreg_chnlval[0]);
	break;
	case HT_CHANNEL_WIDTH_20_40:
	rtlphy->rfreg_chnlval[0] = ((rtlphy->rfreg_chnlval[0] &
	0xfffff3ff));
	rtl_set_rfreg(hw, RF90_PATH_A, RF_CHNLBW, RFREG_OFFSET_MASK,
	rtlphy->rfreg_chnlval[0]);
	break;
	default:
	RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
	"unknown bandwidth: %#X\n", bandwidth);
	break;
	}
	}