| /* |
| * Copyright 2010 Tilera Corporation. All Rights Reserved. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation, version 2. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or |
| * NON INFRINGEMENT. See the GNU General Public License for |
| * more details. |
| */ |
| |
| #ifndef _ASM_TILE_IO_H |
| #define _ASM_TILE_IO_H |
| |
| #include <linux/kernel.h> |
| #include <linux/bug.h> |
| #include <asm/page.h> |
| |
| /* Maximum PCI I/O space address supported. */ |
| #define IO_SPACE_LIMIT 0xffffffff |
| |
| /* |
| * Convert a physical pointer to a virtual kernel pointer for /dev/mem |
| * access. |
| */ |
| #define xlate_dev_mem_ptr(p) __va(p) |
| |
| /* |
| * Convert a virtual cached pointer to an uncached pointer. |
| */ |
| #define xlate_dev_kmem_ptr(p) p |
| |
| /* |
| * Change "struct page" to physical address. |
| */ |
| #define page_to_phys(page) ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT) |
| |
| /* |
| * Some places try to pass in an loff_t for PHYSADDR (?!), so we cast it to |
| * long before casting it to a pointer to avoid compiler warnings. |
| */ |
| #if CHIP_HAS_MMIO() |
| extern void __iomem *ioremap(resource_size_t offset, unsigned long size); |
| extern void __iomem *ioremap_prot(resource_size_t offset, unsigned long size, |
| pgprot_t pgprot); |
| extern void iounmap(volatile void __iomem *addr); |
| #else |
| #define ioremap(physaddr, size) ((void __iomem *)(unsigned long)(physaddr)) |
| #define iounmap(addr) ((void)0) |
| #endif |
| |
| #define ioremap_nocache(physaddr, size) ioremap(physaddr, size) |
| #define ioremap_wc(physaddr, size) ioremap(physaddr, size) |
| #define ioremap_writethrough(physaddr, size) ioremap(physaddr, size) |
| #define ioremap_fullcache(physaddr, size) ioremap(physaddr, size) |
| |
| #define mmiowb() |
| |
| /* Conversion between virtual and physical mappings. */ |
| #define mm_ptov(addr) ((void *)phys_to_virt(addr)) |
| #define mm_vtop(addr) ((unsigned long)virt_to_phys(addr)) |
| |
| #if CHIP_HAS_MMIO() |
| |
| /* |
| * We use inline assembly to guarantee that the compiler does not |
| * split an access into multiple byte-sized accesses as it might |
| * sometimes do if a register data structure is marked "packed". |
| * Obviously on tile we can't tolerate such an access being |
| * actually unaligned, but we want to avoid the case where the |
| * compiler conservatively would generate multiple accesses even |
| * for an aligned read or write. |
| */ |
| |
| static inline u8 __raw_readb(const volatile void __iomem *addr) |
| { |
| return *(const volatile u8 __force *)addr; |
| } |
| |
| static inline u16 __raw_readw(const volatile void __iomem *addr) |
| { |
| u16 ret; |
| asm volatile("ld2u %0, %1" : "=r" (ret) : "r" (addr)); |
| barrier(); |
| return le16_to_cpu(ret); |
| } |
| |
| static inline u32 __raw_readl(const volatile void __iomem *addr) |
| { |
| u32 ret; |
| /* Sign-extend to conform to u32 ABI sign-extension convention. */ |
| asm volatile("ld4s %0, %1" : "=r" (ret) : "r" (addr)); |
| barrier(); |
| return le32_to_cpu(ret); |
| } |
| |
| static inline u64 __raw_readq(const volatile void __iomem *addr) |
| { |
| u64 ret; |
| asm volatile("ld %0, %1" : "=r" (ret) : "r" (addr)); |
| barrier(); |
| return le64_to_cpu(ret); |
| } |
| |
| static inline void __raw_writeb(u8 val, volatile void __iomem *addr) |
| { |
| *(volatile u8 __force *)addr = val; |
| } |
| |
| static inline void __raw_writew(u16 val, volatile void __iomem *addr) |
| { |
| asm volatile("st2 %0, %1" :: "r" (addr), "r" (cpu_to_le16(val))); |
| } |
| |
| static inline void __raw_writel(u32 val, volatile void __iomem *addr) |
| { |
| asm volatile("st4 %0, %1" :: "r" (addr), "r" (cpu_to_le32(val))); |
| } |
| |
| static inline void __raw_writeq(u64 val, volatile void __iomem *addr) |
| { |
| asm volatile("st %0, %1" :: "r" (addr), "r" (cpu_to_le64(val))); |
| } |
| |
| /* |
| * The on-chip I/O hardware on tilegx is configured with VA=PA for the |
| * kernel's PA range. The low-level APIs and field names use "va" and |
| * "void *" nomenclature, to be consistent with the general notion |
| * that the addresses in question are virtualizable, but in the kernel |
| * context we are actually manipulating PA values. (In other contexts, |
| * e.g. access from user space, we do in fact use real virtual addresses |
| * in the va fields.) To allow readers of the code to understand what's |
| * happening, we direct their attention to this comment by using the |
| * following two functions that just duplicate __va() and __pa(). |
| */ |
| typedef unsigned long tile_io_addr_t; |
| static inline tile_io_addr_t va_to_tile_io_addr(void *va) |
| { |
| BUILD_BUG_ON(sizeof(phys_addr_t) != sizeof(tile_io_addr_t)); |
| return __pa(va); |
| } |
| static inline void *tile_io_addr_to_va(tile_io_addr_t tile_io_addr) |
| { |
| return __va(tile_io_addr); |
| } |
| |
| #else /* CHIP_HAS_MMIO() */ |
| |
| #ifdef CONFIG_PCI |
| |
| extern u8 _tile_readb(unsigned long addr); |
| extern u16 _tile_readw(unsigned long addr); |
| extern u32 _tile_readl(unsigned long addr); |
| extern u64 _tile_readq(unsigned long addr); |
| extern void _tile_writeb(u8 val, unsigned long addr); |
| extern void _tile_writew(u16 val, unsigned long addr); |
| extern void _tile_writel(u32 val, unsigned long addr); |
| extern void _tile_writeq(u64 val, unsigned long addr); |
| |
| #define __raw_readb(addr) _tile_readb((unsigned long)addr) |
| #define __raw_readw(addr) _tile_readw((unsigned long)addr) |
| #define __raw_readl(addr) _tile_readl((unsigned long)addr) |
| #define __raw_readq(addr) _tile_readq((unsigned long)addr) |
| #define __raw_writeb(val, addr) _tile_writeb(val, (unsigned long)addr) |
| #define __raw_writew(val, addr) _tile_writew(val, (unsigned long)addr) |
| #define __raw_writel(val, addr) _tile_writel(val, (unsigned long)addr) |
| #define __raw_writeq(val, addr) _tile_writeq(val, (unsigned long)addr) |
| |
| #else /* CONFIG_PCI */ |
| |
| /* |
| * The tilepro architecture does not support IOMEM unless PCI is enabled. |
| * Unfortunately we can't yet simply not declare these methods, |
| * since some generic code that compiles into the kernel, but |
| * we never run, uses them unconditionally. |
| */ |
| |
| static inline int iomem_panic(void) |
| { |
| panic("readb/writeb and friends do not exist on tile without PCI"); |
| return 0; |
| } |
| |
| static inline u8 readb(unsigned long addr) |
| { |
| return iomem_panic(); |
| } |
| |
| static inline u16 _readw(unsigned long addr) |
| { |
| return iomem_panic(); |
| } |
| |
| static inline u32 readl(unsigned long addr) |
| { |
| return iomem_panic(); |
| } |
| |
| static inline u64 readq(unsigned long addr) |
| { |
| return iomem_panic(); |
| } |
| |
| static inline void writeb(u8 val, unsigned long addr) |
| { |
| iomem_panic(); |
| } |
| |
| static inline void writew(u16 val, unsigned long addr) |
| { |
| iomem_panic(); |
| } |
| |
| static inline void writel(u32 val, unsigned long addr) |
| { |
| iomem_panic(); |
| } |
| |
| static inline void writeq(u64 val, unsigned long addr) |
| { |
| iomem_panic(); |
| } |
| |
| #endif /* CONFIG_PCI */ |
| |
| #endif /* CHIP_HAS_MMIO() */ |
| |
| #define readb __raw_readb |
| #define readw __raw_readw |
| #define readl __raw_readl |
| #define readq __raw_readq |
| #define writeb __raw_writeb |
| #define writew __raw_writew |
| #define writel __raw_writel |
| #define writeq __raw_writeq |
| |
| #define readb_relaxed readb |
| #define readw_relaxed readw |
| #define readl_relaxed readl |
| #define readq_relaxed readq |
| #define writeb_relaxed writeb |
| #define writew_relaxed writew |
| #define writel_relaxed writel |
| #define writeq_relaxed writeq |
| |
| #define ioread8 readb |
| #define ioread16 readw |
| #define ioread32 readl |
| #define ioread64 readq |
| #define iowrite8 writeb |
| #define iowrite16 writew |
| #define iowrite32 writel |
| #define iowrite64 writeq |
| |
| #if CHIP_HAS_MMIO() || defined(CONFIG_PCI) |
| |
| static inline void memset_io(volatile void *dst, int val, size_t len) |
| { |
| size_t x; |
| BUG_ON((unsigned long)dst & 0x3); |
| val = (val & 0xff) * 0x01010101; |
| for (x = 0; x < len; x += 4) |
| writel(val, dst + x); |
| } |
| |
| static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, |
| size_t len) |
| { |
| size_t x; |
| BUG_ON((unsigned long)src & 0x3); |
| for (x = 0; x < len; x += 4) |
| *(u32 *)(dst + x) = readl(src + x); |
| } |
| |
| static inline void memcpy_toio(volatile void __iomem *dst, const void *src, |
| size_t len) |
| { |
| size_t x; |
| BUG_ON((unsigned long)dst & 0x3); |
| for (x = 0; x < len; x += 4) |
| writel(*(u32 *)(src + x), dst + x); |
| } |
| |
| #endif |
| |
| #if CHIP_HAS_MMIO() && defined(CONFIG_TILE_PCI_IO) |
| |
| static inline u8 inb(unsigned long addr) |
| { |
| return readb((volatile void __iomem *) addr); |
| } |
| |
| static inline u16 inw(unsigned long addr) |
| { |
| return readw((volatile void __iomem *) addr); |
| } |
| |
| static inline u32 inl(unsigned long addr) |
| { |
| return readl((volatile void __iomem *) addr); |
| } |
| |
| static inline void outb(u8 b, unsigned long addr) |
| { |
| writeb(b, (volatile void __iomem *) addr); |
| } |
| |
| static inline void outw(u16 b, unsigned long addr) |
| { |
| writew(b, (volatile void __iomem *) addr); |
| } |
| |
| static inline void outl(u32 b, unsigned long addr) |
| { |
| writel(b, (volatile void __iomem *) addr); |
| } |
| |
| static inline void insb(unsigned long addr, void *buffer, int count) |
| { |
| if (count) { |
| u8 *buf = buffer; |
| do { |
| u8 x = inb(addr); |
| *buf++ = x; |
| } while (--count); |
| } |
| } |
| |
| static inline void insw(unsigned long addr, void *buffer, int count) |
| { |
| if (count) { |
| u16 *buf = buffer; |
| do { |
| u16 x = inw(addr); |
| *buf++ = x; |
| } while (--count); |
| } |
| } |
| |
| static inline void insl(unsigned long addr, void *buffer, int count) |
| { |
| if (count) { |
| u32 *buf = buffer; |
| do { |
| u32 x = inl(addr); |
| *buf++ = x; |
| } while (--count); |
| } |
| } |
| |
| static inline void outsb(unsigned long addr, const void *buffer, int count) |
| { |
| if (count) { |
| const u8 *buf = buffer; |
| do { |
| outb(*buf++, addr); |
| } while (--count); |
| } |
| } |
| |
| static inline void outsw(unsigned long addr, const void *buffer, int count) |
| { |
| if (count) { |
| const u16 *buf = buffer; |
| do { |
| outw(*buf++, addr); |
| } while (--count); |
| } |
| } |
| |
| static inline void outsl(unsigned long addr, const void *buffer, int count) |
| { |
| if (count) { |
| const u32 *buf = buffer; |
| do { |
| outl(*buf++, addr); |
| } while (--count); |
| } |
| } |
| |
| extern void __iomem *ioport_map(unsigned long port, unsigned int len); |
| extern void ioport_unmap(void __iomem *addr); |
| |
| #else |
| |
| /* |
| * The TilePro architecture does not support IOPORT, even with PCI. |
| * Unfortunately we can't yet simply not declare these methods, |
| * since some generic code that compiles into the kernel, but |
| * we never run, uses them unconditionally. |
| */ |
| |
| static inline long ioport_panic(void) |
| { |
| #ifdef __tilegx__ |
| panic("PCI IO space support is disabled. Configure the kernel with CONFIG_TILE_PCI_IO to enable it"); |
| #else |
| panic("inb/outb and friends do not exist on tile"); |
| #endif |
| return 0; |
| } |
| |
| static inline void __iomem *ioport_map(unsigned long port, unsigned int len) |
| { |
| pr_info("ioport_map: mapping IO resources is unsupported on tile\n"); |
| return NULL; |
| } |
| |
| static inline void ioport_unmap(void __iomem *addr) |
| { |
| ioport_panic(); |
| } |
| |
| static inline u8 inb(unsigned long addr) |
| { |
| return ioport_panic(); |
| } |
| |
| static inline u16 inw(unsigned long addr) |
| { |
| return ioport_panic(); |
| } |
| |
| static inline u32 inl(unsigned long addr) |
| { |
| return ioport_panic(); |
| } |
| |
| static inline void outb(u8 b, unsigned long addr) |
| { |
| ioport_panic(); |
| } |
| |
| static inline void outw(u16 b, unsigned long addr) |
| { |
| ioport_panic(); |
| } |
| |
| static inline void outl(u32 b, unsigned long addr) |
| { |
| ioport_panic(); |
| } |
| |
| static inline void insb(unsigned long addr, void *buffer, int count) |
| { |
| ioport_panic(); |
| } |
| |
| static inline void insw(unsigned long addr, void *buffer, int count) |
| { |
| ioport_panic(); |
| } |
| |
| static inline void insl(unsigned long addr, void *buffer, int count) |
| { |
| ioport_panic(); |
| } |
| |
| static inline void outsb(unsigned long addr, const void *buffer, int count) |
| { |
| ioport_panic(); |
| } |
| |
| static inline void outsw(unsigned long addr, const void *buffer, int count) |
| { |
| ioport_panic(); |
| } |
| |
| static inline void outsl(unsigned long addr, const void *buffer, int count) |
| { |
| ioport_panic(); |
| } |
| |
| #endif /* CHIP_HAS_MMIO() && defined(CONFIG_TILE_PCI_IO) */ |
| |
| #define inb_p(addr) inb(addr) |
| #define inw_p(addr) inw(addr) |
| #define inl_p(addr) inl(addr) |
| #define outb_p(x, addr) outb((x), (addr)) |
| #define outw_p(x, addr) outw((x), (addr)) |
| #define outl_p(x, addr) outl((x), (addr)) |
| |
| #define ioread16be(addr) be16_to_cpu(ioread16(addr)) |
| #define ioread32be(addr) be32_to_cpu(ioread32(addr)) |
| #define iowrite16be(v, addr) iowrite16(be16_to_cpu(v), (addr)) |
| #define iowrite32be(v, addr) iowrite32(be32_to_cpu(v), (addr)) |
| |
| #define ioread8_rep(p, dst, count) \ |
| insb((unsigned long) (p), (dst), (count)) |
| #define ioread16_rep(p, dst, count) \ |
| insw((unsigned long) (p), (dst), (count)) |
| #define ioread32_rep(p, dst, count) \ |
| insl((unsigned long) (p), (dst), (count)) |
| |
| #define iowrite8_rep(p, src, count) \ |
| outsb((unsigned long) (p), (src), (count)) |
| #define iowrite16_rep(p, src, count) \ |
| outsw((unsigned long) (p), (src), (count)) |
| #define iowrite32_rep(p, src, count) \ |
| outsl((unsigned long) (p), (src), (count)) |
| |
| #define virt_to_bus virt_to_phys |
| #define bus_to_virt phys_to_virt |
| |
| #endif /* _ASM_TILE_IO_H */ |