| /* |
| * pgtsrmmu.h: SRMMU page table defines and code. |
| * |
| * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) |
| */ |
| |
| #ifndef _SPARC_PGTSRMMU_H |
| #define _SPARC_PGTSRMMU_H |
| |
| #include <asm/page.h> |
| |
| #ifdef __ASSEMBLY__ |
| #include <asm/thread_info.h> /* TI_UWINMASK for WINDOW_FLUSH */ |
| #endif |
| |
| /* Number of contexts is implementation-dependent; 64k is the most we support */ |
| #define SRMMU_MAX_CONTEXTS 65536 |
| |
| /* PMD_SHIFT determines the size of the area a second-level page table entry can map */ |
| #define SRMMU_REAL_PMD_SHIFT 18 |
| #define SRMMU_REAL_PMD_SIZE (1UL << SRMMU_REAL_PMD_SHIFT) |
| #define SRMMU_REAL_PMD_MASK (~(SRMMU_REAL_PMD_SIZE-1)) |
| #define SRMMU_REAL_PMD_ALIGN(__addr) (((__addr)+SRMMU_REAL_PMD_SIZE-1)&SRMMU_REAL_PMD_MASK) |
| |
| /* PGDIR_SHIFT determines what a third-level page table entry can map */ |
| #define SRMMU_PGDIR_SHIFT 24 |
| #define SRMMU_PGDIR_SIZE (1UL << SRMMU_PGDIR_SHIFT) |
| #define SRMMU_PGDIR_MASK (~(SRMMU_PGDIR_SIZE-1)) |
| #define SRMMU_PGDIR_ALIGN(addr) (((addr)+SRMMU_PGDIR_SIZE-1)&SRMMU_PGDIR_MASK) |
| |
| #define SRMMU_REAL_PTRS_PER_PTE 64 |
| #define SRMMU_REAL_PTRS_PER_PMD 64 |
| #define SRMMU_PTRS_PER_PGD 256 |
| |
| #define SRMMU_REAL_PTE_TABLE_SIZE (SRMMU_REAL_PTRS_PER_PTE*4) |
| #define SRMMU_PMD_TABLE_SIZE (SRMMU_REAL_PTRS_PER_PMD*4) |
| #define SRMMU_PGD_TABLE_SIZE (SRMMU_PTRS_PER_PGD*4) |
| |
| /* |
| * To support pagetables in highmem, Linux introduces APIs which |
| * return struct page* and generally manipulate page tables when |
| * they are not mapped into kernel space. Our hardware page tables |
| * are smaller than pages. We lump hardware tabes into big, page sized |
| * software tables. |
| * |
| * PMD_SHIFT determines the size of the area a second-level page table entry |
| * can map, and our pmd_t is 16 times larger than normal. The values which |
| * were once defined here are now generic for 4c and srmmu, so they're |
| * found in pgtable.h. |
| */ |
| #define SRMMU_PTRS_PER_PMD 4 |
| |
| /* Definition of the values in the ET field of PTD's and PTE's */ |
| #define SRMMU_ET_MASK 0x3 |
| #define SRMMU_ET_INVALID 0x0 |
| #define SRMMU_ET_PTD 0x1 |
| #define SRMMU_ET_PTE 0x2 |
| #define SRMMU_ET_REPTE 0x3 /* AIEEE, SuperSparc II reverse endian page! */ |
| |
| /* Physical page extraction from PTP's and PTE's. */ |
| #define SRMMU_CTX_PMASK 0xfffffff0 |
| #define SRMMU_PTD_PMASK 0xfffffff0 |
| #define SRMMU_PTE_PMASK 0xffffff00 |
| |
| /* The pte non-page bits. Some notes: |
| * 1) cache, dirty, valid, and ref are frobbable |
| * for both supervisor and user pages. |
| * 2) exec and write will only give the desired effect |
| * on user pages |
| * 3) use priv and priv_readonly for changing the |
| * characteristics of supervisor ptes |
| */ |
| #define SRMMU_CACHE 0x80 |
| #define SRMMU_DIRTY 0x40 |
| #define SRMMU_REF 0x20 |
| #define SRMMU_NOREAD 0x10 |
| #define SRMMU_EXEC 0x08 |
| #define SRMMU_WRITE 0x04 |
| #define SRMMU_VALID 0x02 /* SRMMU_ET_PTE */ |
| #define SRMMU_PRIV 0x1c |
| #define SRMMU_PRIV_RDONLY 0x18 |
| |
| #define SRMMU_CHG_MASK (0xffffff00 | SRMMU_REF | SRMMU_DIRTY) |
| |
| /* SRMMU swap entry encoding |
| * |
| * We use 5 bits for the type and 19 for the offset. This gives us |
| * 32 swapfiles of 4GB each. Encoding looks like: |
| * |
| * oooooooooooooooooootttttRRRRRRRR |
| * fedcba9876543210fedcba9876543210 |
| * |
| * The bottom 7 bits are reserved for protection and status bits, especially |
| * PRESENT. |
| */ |
| #define SRMMU_SWP_TYPE_MASK 0x1f |
| #define SRMMU_SWP_TYPE_SHIFT 7 |
| #define SRMMU_SWP_OFF_MASK 0xfffff |
| #define SRMMU_SWP_OFF_SHIFT (SRMMU_SWP_TYPE_SHIFT + 5) |
| |
| /* Some day I will implement true fine grained access bits for |
| * user pages because the SRMMU gives us the capabilities to |
| * enforce all the protection levels that vma's can have. |
| * XXX But for now... |
| */ |
| #define SRMMU_PAGE_NONE __pgprot(SRMMU_CACHE | \ |
| SRMMU_PRIV | SRMMU_REF) |
| #define SRMMU_PAGE_SHARED __pgprot(SRMMU_VALID | SRMMU_CACHE | \ |
| SRMMU_EXEC | SRMMU_WRITE | SRMMU_REF) |
| #define SRMMU_PAGE_COPY __pgprot(SRMMU_VALID | SRMMU_CACHE | \ |
| SRMMU_EXEC | SRMMU_REF) |
| #define SRMMU_PAGE_RDONLY __pgprot(SRMMU_VALID | SRMMU_CACHE | \ |
| SRMMU_EXEC | SRMMU_REF) |
| #define SRMMU_PAGE_KERNEL __pgprot(SRMMU_VALID | SRMMU_CACHE | SRMMU_PRIV | \ |
| SRMMU_DIRTY | SRMMU_REF) |
| |
| /* SRMMU Register addresses in ASI 0x4. These are valid for all |
| * current SRMMU implementations that exist. |
| */ |
| #define SRMMU_CTRL_REG 0x00000000 |
| #define SRMMU_CTXTBL_PTR 0x00000100 |
| #define SRMMU_CTX_REG 0x00000200 |
| #define SRMMU_FAULT_STATUS 0x00000300 |
| #define SRMMU_FAULT_ADDR 0x00000400 |
| |
| #define WINDOW_FLUSH(tmp1, tmp2) \ |
| mov 0, tmp1; \ |
| 98: ld [%g6 + TI_UWINMASK], tmp2; \ |
| orcc %g0, tmp2, %g0; \ |
| add tmp1, 1, tmp1; \ |
| bne 98b; \ |
| save %sp, -64, %sp; \ |
| 99: subcc tmp1, 1, tmp1; \ |
| bne 99b; \ |
| restore %g0, %g0, %g0; |
| |
| #ifndef __ASSEMBLY__ |
| extern unsigned long last_valid_pfn; |
| |
| /* This makes sense. Honest it does - Anton */ |
| /* XXX Yes but it's ugly as sin. FIXME. -KMW */ |
| extern void *srmmu_nocache_pool; |
| #define __nocache_pa(VADDR) (((unsigned long)VADDR) - SRMMU_NOCACHE_VADDR + __pa((unsigned long)srmmu_nocache_pool)) |
| #define __nocache_va(PADDR) (__va((unsigned long)PADDR) - (unsigned long)srmmu_nocache_pool + SRMMU_NOCACHE_VADDR) |
| #define __nocache_fix(VADDR) __va(__nocache_pa(VADDR)) |
| |
| /* Accessing the MMU control register. */ |
| unsigned int srmmu_get_mmureg(void); |
| void srmmu_set_mmureg(unsigned long regval); |
| void srmmu_set_ctable_ptr(unsigned long paddr); |
| void srmmu_set_context(int context); |
| int srmmu_get_context(void); |
| unsigned int srmmu_get_fstatus(void); |
| unsigned int srmmu_get_faddr(void); |
| |
| /* This is guaranteed on all SRMMU's. */ |
| static inline void srmmu_flush_whole_tlb(void) |
| { |
| __asm__ __volatile__("sta %%g0, [%0] %1\n\t": : |
| "r" (0x400), /* Flush entire TLB!! */ |
| "i" (ASI_M_FLUSH_PROBE) : "memory"); |
| |
| } |
| |
| static inline int |
| srmmu_get_pte (unsigned long addr) |
| { |
| register unsigned long entry; |
| |
| __asm__ __volatile__("\n\tlda [%1] %2,%0\n\t" : |
| "=r" (entry): |
| "r" ((addr & 0xfffff000) | 0x400), "i" (ASI_M_FLUSH_PROBE)); |
| return entry; |
| } |
| |
| #endif /* !(__ASSEMBLY__) */ |
| |
| #endif /* !(_SPARC_PGTSRMMU_H) */ |