| /* |
| * LEDs driver for GPIOs |
| * |
| * Copyright (C) 2007 8D Technologies inc. |
| * Raphael Assenat <raph@8d.com> |
| * Copyright (C) 2008 Freescale Semiconductor, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| */ |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/gpio.h> |
| #include <linux/leds.h> |
| #include <linux/of.h> |
| #include <linux/of_platform.h> |
| #include <linux/of_gpio.h> |
| #include <linux/slab.h> |
| #include <linux/workqueue.h> |
| #include <linux/module.h> |
| #include <linux/err.h> |
| |
| struct gpio_led_data { |
| struct led_classdev cdev; |
| unsigned gpio; |
| struct work_struct work; |
| u8 new_level; |
| u8 can_sleep; |
| u8 active_low; |
| u8 blinking; |
| int (*platform_gpio_blink_set)(unsigned gpio, int state, |
| unsigned long *delay_on, unsigned long *delay_off); |
| }; |
| |
| static void gpio_led_work(struct work_struct *work) |
| { |
| struct gpio_led_data *led_dat = |
| container_of(work, struct gpio_led_data, work); |
| |
| if (led_dat->blinking) { |
| led_dat->platform_gpio_blink_set(led_dat->gpio, |
| led_dat->new_level, |
| NULL, NULL); |
| led_dat->blinking = 0; |
| } else |
| gpio_set_value_cansleep(led_dat->gpio, led_dat->new_level); |
| } |
| |
| static void gpio_led_set(struct led_classdev *led_cdev, |
| enum led_brightness value) |
| { |
| struct gpio_led_data *led_dat = |
| container_of(led_cdev, struct gpio_led_data, cdev); |
| int level; |
| |
| if (value == LED_OFF) |
| level = 0; |
| else |
| level = 1; |
| |
| if (led_dat->active_low) |
| level = !level; |
| |
| /* Setting GPIOs with I2C/etc requires a task context, and we don't |
| * seem to have a reliable way to know if we're already in one; so |
| * let's just assume the worst. |
| */ |
| if (led_dat->can_sleep) { |
| led_dat->new_level = level; |
| schedule_work(&led_dat->work); |
| } else { |
| if (led_dat->blinking) { |
| led_dat->platform_gpio_blink_set(led_dat->gpio, level, |
| NULL, NULL); |
| led_dat->blinking = 0; |
| } else |
| gpio_set_value(led_dat->gpio, level); |
| } |
| } |
| |
| static int gpio_blink_set(struct led_classdev *led_cdev, |
| unsigned long *delay_on, unsigned long *delay_off) |
| { |
| struct gpio_led_data *led_dat = |
| container_of(led_cdev, struct gpio_led_data, cdev); |
| |
| led_dat->blinking = 1; |
| return led_dat->platform_gpio_blink_set(led_dat->gpio, GPIO_LED_BLINK, |
| delay_on, delay_off); |
| } |
| |
| static int create_gpio_led(const struct gpio_led *template, |
| struct gpio_led_data *led_dat, struct device *parent, |
| int (*blink_set)(unsigned, int, unsigned long *, unsigned long *)) |
| { |
| int ret, state; |
| |
| led_dat->gpio = -1; |
| |
| /* skip leds that aren't available */ |
| if (!gpio_is_valid(template->gpio)) { |
| dev_info(parent, "Skipping unavailable LED gpio %d (%s)\n", |
| template->gpio, template->name); |
| return 0; |
| } |
| |
| ret = devm_gpio_request(parent, template->gpio, template->name); |
| if (ret < 0) |
| return ret; |
| |
| led_dat->cdev.name = template->name; |
| led_dat->cdev.default_trigger = template->default_trigger; |
| led_dat->gpio = template->gpio; |
| led_dat->can_sleep = gpio_cansleep(template->gpio); |
| led_dat->active_low = template->active_low; |
| led_dat->blinking = 0; |
| if (blink_set) { |
| led_dat->platform_gpio_blink_set = blink_set; |
| led_dat->cdev.blink_set = gpio_blink_set; |
| } |
| led_dat->cdev.brightness_set = gpio_led_set; |
| if (template->default_state == LEDS_GPIO_DEFSTATE_KEEP) |
| state = !!gpio_get_value_cansleep(led_dat->gpio) ^ led_dat->active_low; |
| else |
| state = (template->default_state == LEDS_GPIO_DEFSTATE_ON); |
| led_dat->cdev.brightness = state ? LED_FULL : LED_OFF; |
| if (!template->retain_state_suspended) |
| led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME; |
| |
| ret = gpio_direction_output(led_dat->gpio, led_dat->active_low ^ state); |
| if (ret < 0) |
| return ret; |
| |
| INIT_WORK(&led_dat->work, gpio_led_work); |
| |
| ret = led_classdev_register(parent, &led_dat->cdev); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| static void delete_gpio_led(struct gpio_led_data *led) |
| { |
| if (!gpio_is_valid(led->gpio)) |
| return; |
| led_classdev_unregister(&led->cdev); |
| cancel_work_sync(&led->work); |
| } |
| |
| struct gpio_leds_priv { |
| int num_leds; |
| struct gpio_led_data leds[]; |
| }; |
| |
| static inline int sizeof_gpio_leds_priv(int num_leds) |
| { |
| return sizeof(struct gpio_leds_priv) + |
| (sizeof(struct gpio_led_data) * num_leds); |
| } |
| |
| /* Code to create from OpenFirmware platform devices */ |
| #ifdef CONFIG_OF_GPIO |
| static struct gpio_leds_priv *gpio_leds_create_of(struct platform_device *pdev) |
| { |
| struct device_node *np = pdev->dev.of_node, *child; |
| struct gpio_leds_priv *priv; |
| int count, ret; |
| |
| /* count LEDs in this device, so we know how much to allocate */ |
| count = of_get_available_child_count(np); |
| if (!count) |
| return ERR_PTR(-ENODEV); |
| |
| for_each_available_child_of_node(np, child) |
| if (of_get_gpio(child, 0) == -EPROBE_DEFER) |
| return ERR_PTR(-EPROBE_DEFER); |
| |
| priv = devm_kzalloc(&pdev->dev, sizeof_gpio_leds_priv(count), |
| GFP_KERNEL); |
| if (!priv) |
| return ERR_PTR(-ENOMEM); |
| |
| for_each_available_child_of_node(np, child) { |
| struct gpio_led led = {}; |
| enum of_gpio_flags flags; |
| const char *state; |
| |
| led.gpio = of_get_gpio_flags(child, 0, &flags); |
| led.active_low = flags & OF_GPIO_ACTIVE_LOW; |
| led.name = of_get_property(child, "label", NULL) ? : child->name; |
| led.default_trigger = |
| of_get_property(child, "linux,default-trigger", NULL); |
| state = of_get_property(child, "default-state", NULL); |
| if (state) { |
| if (!strcmp(state, "keep")) |
| led.default_state = LEDS_GPIO_DEFSTATE_KEEP; |
| else if (!strcmp(state, "on")) |
| led.default_state = LEDS_GPIO_DEFSTATE_ON; |
| else |
| led.default_state = LEDS_GPIO_DEFSTATE_OFF; |
| } |
| |
| ret = create_gpio_led(&led, &priv->leds[priv->num_leds++], |
| &pdev->dev, NULL); |
| if (ret < 0) { |
| of_node_put(child); |
| goto err; |
| } |
| } |
| |
| return priv; |
| |
| err: |
| for (count = priv->num_leds - 2; count >= 0; count--) |
| delete_gpio_led(&priv->leds[count]); |
| return ERR_PTR(-ENODEV); |
| } |
| |
| static const struct of_device_id of_gpio_leds_match[] = { |
| { .compatible = "gpio-leds", }, |
| {}, |
| }; |
| #else /* CONFIG_OF_GPIO */ |
| static struct gpio_leds_priv *gpio_leds_create_of(struct platform_device *pdev) |
| { |
| return ERR_PTR(-ENODEV); |
| } |
| #endif /* CONFIG_OF_GPIO */ |
| |
| |
| static int gpio_led_probe(struct platform_device *pdev) |
| { |
| struct gpio_led_platform_data *pdata = dev_get_platdata(&pdev->dev); |
| struct gpio_leds_priv *priv; |
| int i, ret = 0; |
| |
| |
| if (pdata && pdata->num_leds) { |
| priv = devm_kzalloc(&pdev->dev, |
| sizeof_gpio_leds_priv(pdata->num_leds), |
| GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| priv->num_leds = pdata->num_leds; |
| for (i = 0; i < priv->num_leds; i++) { |
| ret = create_gpio_led(&pdata->leds[i], |
| &priv->leds[i], |
| &pdev->dev, pdata->gpio_blink_set); |
| if (ret < 0) { |
| /* On failure: unwind the led creations */ |
| for (i = i - 1; i >= 0; i--) |
| delete_gpio_led(&priv->leds[i]); |
| return ret; |
| } |
| } |
| } else { |
| priv = gpio_leds_create_of(pdev); |
| if (IS_ERR(priv)) |
| return PTR_ERR(priv); |
| } |
| |
| platform_set_drvdata(pdev, priv); |
| |
| return 0; |
| } |
| |
| static int gpio_led_remove(struct platform_device *pdev) |
| { |
| struct gpio_leds_priv *priv = platform_get_drvdata(pdev); |
| int i; |
| |
| for (i = 0; i < priv->num_leds; i++) |
| delete_gpio_led(&priv->leds[i]); |
| |
| return 0; |
| } |
| |
| static struct platform_driver gpio_led_driver = { |
| .probe = gpio_led_probe, |
| .remove = gpio_led_remove, |
| .driver = { |
| .name = "leds-gpio", |
| .owner = THIS_MODULE, |
| .of_match_table = of_match_ptr(of_gpio_leds_match), |
| }, |
| }; |
| |
| module_platform_driver(gpio_led_driver); |
| |
| MODULE_AUTHOR("Raphael Assenat <raph@8d.com>, Trent Piepho <tpiepho@freescale.com>"); |
| MODULE_DESCRIPTION("GPIO LED driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:leds-gpio"); |