| config VIDEO_EM28XX |
| tristate "Empia EM28xx USB devices support" |
| depends on VIDEO_DEV && I2C |
| select VIDEO_TUNER |
| select VIDEO_TVEEPROM |
| |
| config VIDEO_EM28XX_V4L2 |
| tristate "Empia EM28xx analog TV, video capture and/or webcam support" |
| depends on VIDEO_EM28XX |
| select VIDEOBUF2_VMALLOC |
| select VIDEO_SAA711X if MEDIA_SUBDRV_AUTOSELECT |
| select VIDEO_TVP5150 if MEDIA_SUBDRV_AUTOSELECT |
| select VIDEO_MSP3400 if MEDIA_SUBDRV_AUTOSELECT |
| select VIDEO_MT9V011 if MEDIA_SUBDRV_AUTOSELECT |
| |
| ---help--- |
| This is a video4linux driver for Empia 28xx based TV cards. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called em28xx |
| |
| config VIDEO_EM28XX_ALSA |
| depends on VIDEO_EM28XX && SND |
| select SND_PCM |
| tristate "Empia EM28xx ALSA audio module" |
| ---help--- |
| This is an ALSA driver for some Empia 28xx based TV cards. |
| |
| This is not required for em2800/em2820/em2821 boards. However, |
| newer em28xx devices uses Vendor Class for audio, instead of |
| implementing the USB Audio Class. For those chips, this module |
| will enable digital audio. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called em28xx-alsa |
| |
| config VIDEO_EM28XX_DVB |
| tristate "DVB/ATSC Support for em28xx based TV cards" |
| depends on VIDEO_EM28XX && DVB_CORE |
| select DVB_LGDT330X if MEDIA_SUBDRV_AUTOSELECT |
| select DVB_LGDT3305 if MEDIA_SUBDRV_AUTOSELECT |
| select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT |
| select DVB_TDA10023 if MEDIA_SUBDRV_AUTOSELECT |
| select DVB_S921 if MEDIA_SUBDRV_AUTOSELECT |
| select DVB_DRXD if MEDIA_SUBDRV_AUTOSELECT |
| select DVB_CXD2820R if MEDIA_SUBDRV_AUTOSELECT |
| select DVB_DRXK if MEDIA_SUBDRV_AUTOSELECT |
| select DVB_TDA18271C2DD if MEDIA_SUBDRV_AUTOSELECT |
| select DVB_TDA10071 if MEDIA_SUBDRV_AUTOSELECT |
| select DVB_A8293 if MEDIA_SUBDRV_AUTOSELECT |
| select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT |
| select DVB_S5H1409 if MEDIA_SUBDRV_AUTOSELECT |
| select DVB_MB86A20S if MEDIA_SUBDRV_AUTOSELECT |
| select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT |
| select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT |
| select MEDIA_TUNER_TDA18212 if MEDIA_SUBDRV_AUTOSELECT |
| select DVB_M88DS3103 if MEDIA_SUBDRV_AUTOSELECT |
| select DVB_TS2020 if MEDIA_SUBDRV_AUTOSELECT |
| select DVB_DRX39XYJ if MEDIA_SUBDRV_AUTOSELECT |
| select DVB_SI2168 if MEDIA_SUBDRV_AUTOSELECT |
| select MEDIA_TUNER_SI2157 if MEDIA_SUBDRV_AUTOSELECT |
| ---help--- |
| This adds support for DVB cards based on the |
| Empiatech em28xx chips. |
| |
| config VIDEO_EM28XX_RC |
| tristate "EM28XX Remote Controller support" |
| depends on RC_CORE |
| depends on VIDEO_EM28XX |
| depends on !(RC_CORE=m && VIDEO_EM28XX=y) |
| default VIDEO_EM28XX |
| ---help--- |
| Enables Remote Controller support on em28xx driver. |