| config ARCH_SHMOBILE |
| bool |
| select ZONE_DMA if ARM_LPAE |
| |
| config PM_RCAR |
| bool |
| |
| config PM_RMOBILE |
| bool |
| select PM_GENERIC_DOMAINS |
| |
| config ARCH_RCAR_GEN1 |
| bool |
| select PM_RCAR if PM || SMP |
| select RENESAS_INTC_IRQPIN |
| select SYS_SUPPORTS_SH_TMU |
| |
| config ARCH_RCAR_GEN2 |
| bool |
| select PM_RCAR if PM || SMP |
| select RENESAS_IRQC |
| select SYS_SUPPORTS_SH_CMT |
| select PCI_DOMAINS if PCI |
| |
| config ARCH_RMOBILE |
| bool |
| select PM_RMOBILE if PM |
| select SYS_SUPPORTS_SH_CMT |
| select SYS_SUPPORTS_SH_TMU |
| |
| menuconfig ARCH_SHMOBILE_MULTI |
| bool "Renesas ARM SoCs" if ARCH_MULTI_V7 |
| depends on MMU |
| select ARCH_SHMOBILE |
| select HAVE_ARM_SCU if SMP |
| select HAVE_ARM_TWD if SMP |
| select ARM_GIC |
| select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE |
| select NO_IOPORT_MAP |
| select PINCTRL |
| select ARCH_REQUIRE_GPIOLIB |
| |
| if ARCH_SHMOBILE_MULTI |
| |
| #comment "Renesas ARM SoCs System Type" |
| |
| config ARCH_EMEV2 |
| bool "Emma Mobile EV2" |
| select SYS_SUPPORTS_EM_STI |
| |
| config ARCH_R7S72100 |
| bool "RZ/A1H (R7S72100)" |
| select SYS_SUPPORTS_SH_MTU2 |
| |
| config ARCH_R8A73A4 |
| bool "R-Mobile APE6 (R8A73A40)" |
| select ARCH_RMOBILE |
| select RENESAS_IRQC |
| |
| config ARCH_R8A7740 |
| bool "R-Mobile A1 (R8A77400)" |
| select ARCH_RMOBILE |
| select RENESAS_INTC_IRQPIN |
| |
| config ARCH_R8A7778 |
| bool "R-Car M1A (R8A77781)" |
| select ARCH_RCAR_GEN1 |
| |
| config ARCH_R8A7779 |
| bool "R-Car H1 (R8A77790)" |
| select ARCH_RCAR_GEN1 |
| |
| config ARCH_R8A7790 |
| bool "R-Car H2 (R8A77900)" |
| select ARCH_RCAR_GEN2 |
| select I2C |
| |
| config ARCH_R8A7791 |
| bool "R-Car M2-W (R8A77910)" |
| select ARCH_RCAR_GEN2 |
| select I2C |
| |
| config ARCH_R8A7794 |
| bool "R-Car E2 (R8A77940)" |
| select ARCH_RCAR_GEN2 |
| |
| config ARCH_SH73A0 |
| bool "SH-Mobile AG5 (R8A73A00)" |
| select ARCH_RMOBILE |
| select RENESAS_INTC_IRQPIN |
| |
| comment "Renesas ARM SoCs Board Type" |
| |
| config MACH_MARZEN |
| bool "MARZEN board" |
| depends on ARCH_R8A7779 |
| select REGULATOR_FIXED_VOLTAGE if REGULATOR |
| |
| comment "Renesas ARM SoCs System Configuration" |
| endif |
| |
| if ARCH_SHMOBILE_LEGACY |
| |
| comment "Renesas ARM SoCs System Type" |
| |
| config ARCH_SH73A0 |
| bool "SH-Mobile AG5 (R8A73A00)" |
| select ARCH_RMOBILE |
| select ARCH_WANT_OPTIONAL_GPIOLIB |
| select ARM_GIC |
| select I2C |
| select SH_INTC |
| select RENESAS_INTC_IRQPIN |
| |
| config ARCH_R8A7740 |
| bool "R-Mobile A1 (R8A77400)" |
| select ARCH_RMOBILE |
| select ARCH_WANT_OPTIONAL_GPIOLIB |
| select ARM_GIC |
| select RENESAS_INTC_IRQPIN |
| |
| config ARCH_R8A7778 |
| bool "R-Car M1A (R8A77781)" |
| select ARCH_RCAR_GEN1 |
| select ARCH_WANT_OPTIONAL_GPIOLIB |
| select ARM_GIC |
| |
| config ARCH_R8A7779 |
| bool "R-Car H1 (R8A77790)" |
| select ARCH_RCAR_GEN1 |
| select ARCH_WANT_OPTIONAL_GPIOLIB |
| select ARM_GIC |
| |
| comment "Renesas ARM SoCs Board Type" |
| |
| config MACH_ARMADILLO800EVA |
| bool "Armadillo-800 EVA board" |
| depends on ARCH_R8A7740 |
| select ARCH_REQUIRE_GPIOLIB |
| select REGULATOR_FIXED_VOLTAGE if REGULATOR |
| select SMSC_PHY if SH_ETH |
| select SND_SOC_WM8978 if SND_SIMPLE_CARD |
| select USE_OF |
| |
| config MACH_BOCKW |
| bool "BOCK-W platform" |
| depends on ARCH_R8A7778 |
| select ARCH_REQUIRE_GPIOLIB |
| select REGULATOR_FIXED_VOLTAGE if REGULATOR |
| select SND_SOC_AK4554 if SND_SIMPLE_CARD |
| select SND_SOC_AK4642 if SND_SIMPLE_CARD |
| select USE_OF |
| |
| config MACH_BOCKW_REFERENCE |
| bool "BOCK-W - Reference Device Tree Implementation" |
| depends on ARCH_R8A7778 |
| select ARCH_REQUIRE_GPIOLIB |
| select REGULATOR_FIXED_VOLTAGE if REGULATOR |
| select USE_OF |
| ---help--- |
| Use reference implementation of BockW board support |
| which makes use of device tree at the expense |
| of not supporting a number of devices. |
| |
| This is intended to aid developers |
| |
| config MACH_MARZEN |
| bool "MARZEN board" |
| depends on ARCH_R8A7779 |
| select ARCH_REQUIRE_GPIOLIB |
| select REGULATOR_FIXED_VOLTAGE if REGULATOR |
| select USE_OF |
| |
| config MACH_KZM9G |
| bool "KZM-A9-GT board" |
| depends on ARCH_SH73A0 |
| select ARCH_REQUIRE_GPIOLIB |
| select REGULATOR_FIXED_VOLTAGE if REGULATOR |
| select SND_SOC_AK4642 if SND_SIMPLE_CARD |
| select USE_OF |
| |
| comment "Renesas ARM SoCs System Configuration" |
| |
| config CPU_HAS_INTEVT |
| bool |
| default y |
| |
| config SH_CLK_CPG |
| bool |
| |
| source "drivers/sh/Kconfig" |
| |
| endif |
| |
| if ARCH_SHMOBILE |
| |
| menu "Timer and clock configuration" |
| |
| config SHMOBILE_TIMER_HZ |
| int "Kernel HZ (jiffies per second)" |
| range 32 1024 |
| default "128" |
| help |
| Allows the configuration of the timer frequency. It is customary |
| to have the timer interrupt run at 1000 Hz or 100 Hz, but in the |
| case of low timer frequencies other values may be more suitable. |
| Renesas ARM SoC systems using a 32768 Hz RCLK for clock events may |
| want to select a HZ value such as 128 that can evenly divide RCLK. |
| A HZ value that does not divide evenly may cause timer drift. |
| |
| endmenu |
| |
| endif |
