| /* |
| * Afatech AF9033 demodulator driver |
| * |
| * Copyright (C) 2009 Antti Palosaari <crope@iki.fi> |
| * Copyright (C) 2012 Antti Palosaari <crope@iki.fi> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. |
| */ |
| |
| #include "af9033_priv.h" |
| |
| /* Max transfer size done by I2C transfer functions */ |
| #define MAX_XFER_SIZE 64 |
| |
| struct af9033_state { |
| struct i2c_adapter *i2c; |
| struct dvb_frontend fe; |
| struct af9033_config cfg; |
| |
| u32 bandwidth_hz; |
| bool ts_mode_parallel; |
| bool ts_mode_serial; |
| |
| u32 ber; |
| u32 ucb; |
| unsigned long last_stat_check; |
| }; |
| |
| /* write multiple registers */ |
| static int af9033_wr_regs(struct af9033_state *state, u32 reg, const u8 *val, |
| int len) |
| { |
| int ret; |
| u8 buf[MAX_XFER_SIZE]; |
| struct i2c_msg msg[1] = { |
| { |
| .addr = state->cfg.i2c_addr, |
| .flags = 0, |
| .len = 3 + len, |
| .buf = buf, |
| } |
| }; |
| |
| if (3 + len > sizeof(buf)) { |
| dev_warn(&state->i2c->dev, |
| "%s: i2c wr reg=%04x: len=%d is too big!\n", |
| KBUILD_MODNAME, reg, len); |
| return -EINVAL; |
| } |
| |
| buf[0] = (reg >> 16) & 0xff; |
| buf[1] = (reg >> 8) & 0xff; |
| buf[2] = (reg >> 0) & 0xff; |
| memcpy(&buf[3], val, len); |
| |
| ret = i2c_transfer(state->i2c, msg, 1); |
| if (ret == 1) { |
| ret = 0; |
| } else { |
| dev_warn(&state->i2c->dev, "%s: i2c wr failed=%d reg=%06x " \ |
| "len=%d\n", KBUILD_MODNAME, ret, reg, len); |
| ret = -EREMOTEIO; |
| } |
| |
| return ret; |
| } |
| |
| /* read multiple registers */ |
| static int af9033_rd_regs(struct af9033_state *state, u32 reg, u8 *val, int len) |
| { |
| int ret; |
| u8 buf[3] = { (reg >> 16) & 0xff, (reg >> 8) & 0xff, |
| (reg >> 0) & 0xff }; |
| struct i2c_msg msg[2] = { |
| { |
| .addr = state->cfg.i2c_addr, |
| .flags = 0, |
| .len = sizeof(buf), |
| .buf = buf |
| }, { |
| .addr = state->cfg.i2c_addr, |
| .flags = I2C_M_RD, |
| .len = len, |
| .buf = val |
| } |
| }; |
| |
| ret = i2c_transfer(state->i2c, msg, 2); |
| if (ret == 2) { |
| ret = 0; |
| } else { |
| dev_warn(&state->i2c->dev, "%s: i2c rd failed=%d reg=%06x " \ |
| "len=%d\n", KBUILD_MODNAME, ret, reg, len); |
| ret = -EREMOTEIO; |
| } |
| |
| return ret; |
| } |
| |
| |
| /* write single register */ |
| static int af9033_wr_reg(struct af9033_state *state, u32 reg, u8 val) |
| { |
| return af9033_wr_regs(state, reg, &val, 1); |
| } |
| |
| /* read single register */ |
| static int af9033_rd_reg(struct af9033_state *state, u32 reg, u8 *val) |
| { |
| return af9033_rd_regs(state, reg, val, 1); |
| } |
| |
| /* write single register with mask */ |
| static int af9033_wr_reg_mask(struct af9033_state *state, u32 reg, u8 val, |
| u8 mask) |
| { |
| int ret; |
| u8 tmp; |
| |
| /* no need for read if whole reg is written */ |
| if (mask != 0xff) { |
| ret = af9033_rd_regs(state, reg, &tmp, 1); |
| if (ret) |
| return ret; |
| |
| val &= mask; |
| tmp &= ~mask; |
| val |= tmp; |
| } |
| |
| return af9033_wr_regs(state, reg, &val, 1); |
| } |
| |
| /* read single register with mask */ |
| static int af9033_rd_reg_mask(struct af9033_state *state, u32 reg, u8 *val, |
| u8 mask) |
| { |
| int ret, i; |
| u8 tmp; |
| |
| ret = af9033_rd_regs(state, reg, &tmp, 1); |
| if (ret) |
| return ret; |
| |
| tmp &= mask; |
| |
| /* find position of the first bit */ |
| for (i = 0; i < 8; i++) { |
| if ((mask >> i) & 0x01) |
| break; |
| } |
| *val = tmp >> i; |
| |
| return 0; |
| } |
| |
| /* write reg val table using reg addr auto increment */ |
| static int af9033_wr_reg_val_tab(struct af9033_state *state, |
| const struct reg_val *tab, int tab_len) |
| { |
| #define MAX_TAB_LEN 212 |
| int ret, i, j; |
| u8 buf[1 + MAX_TAB_LEN]; |
| |
| dev_dbg(&state->i2c->dev, "%s: tab_len=%d\n", __func__, tab_len); |
| |
| if (tab_len > sizeof(buf)) { |
| dev_warn(&state->i2c->dev, "%s: tab len %d is too big\n", |
| KBUILD_MODNAME, tab_len); |
| return -EINVAL; |
| } |
| |
| for (i = 0, j = 0; i < tab_len; i++) { |
| buf[j] = tab[i].val; |
| |
| if (i == tab_len - 1 || tab[i].reg != tab[i + 1].reg - 1) { |
| ret = af9033_wr_regs(state, tab[i].reg - j, buf, j + 1); |
| if (ret < 0) |
| goto err; |
| |
| j = 0; |
| } else { |
| j++; |
| } |
| } |
| |
| return 0; |
| |
| err: |
| dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| |
| return ret; |
| } |
| |
| static u32 af9033_div(struct af9033_state *state, u32 a, u32 b, u32 x) |
| { |
| u32 r = 0, c = 0, i; |
| |
| dev_dbg(&state->i2c->dev, "%s: a=%d b=%d x=%d\n", __func__, a, b, x); |
| |
| if (a > b) { |
| c = a / b; |
| a = a - c * b; |
| } |
| |
| for (i = 0; i < x; i++) { |
| if (a >= b) { |
| r += 1; |
| a -= b; |
| } |
| a <<= 1; |
| r <<= 1; |
| } |
| r = (c << (u32)x) + r; |
| |
| dev_dbg(&state->i2c->dev, "%s: a=%d b=%d x=%d r=%d r=%x\n", |
| __func__, a, b, x, r, r); |
| |
| return r; |
| } |
| |
| static void af9033_release(struct dvb_frontend *fe) |
| { |
| struct af9033_state *state = fe->demodulator_priv; |
| |
| kfree(state); |
| } |
| |
| static int af9033_init(struct dvb_frontend *fe) |
| { |
| struct af9033_state *state = fe->demodulator_priv; |
| int ret, i, len; |
| const struct reg_val *init; |
| u8 buf[4]; |
| u32 adc_cw, clock_cw; |
| struct reg_val_mask tab[] = { |
| { 0x80fb24, 0x00, 0x08 }, |
| { 0x80004c, 0x00, 0xff }, |
| { 0x00f641, state->cfg.tuner, 0xff }, |
| { 0x80f5ca, 0x01, 0x01 }, |
| { 0x80f715, 0x01, 0x01 }, |
| { 0x00f41f, 0x04, 0x04 }, |
| { 0x00f41a, 0x01, 0x01 }, |
| { 0x80f731, 0x00, 0x01 }, |
| { 0x00d91e, 0x00, 0x01 }, |
| { 0x00d919, 0x00, 0x01 }, |
| { 0x80f732, 0x00, 0x01 }, |
| { 0x00d91f, 0x00, 0x01 }, |
| { 0x00d91a, 0x00, 0x01 }, |
| { 0x80f730, 0x00, 0x01 }, |
| { 0x80f778, 0x00, 0xff }, |
| { 0x80f73c, 0x01, 0x01 }, |
| { 0x80f776, 0x00, 0x01 }, |
| { 0x00d8fd, 0x01, 0xff }, |
| { 0x00d830, 0x01, 0xff }, |
| { 0x00d831, 0x00, 0xff }, |
| { 0x00d832, 0x00, 0xff }, |
| { 0x80f985, state->ts_mode_serial, 0x01 }, |
| { 0x80f986, state->ts_mode_parallel, 0x01 }, |
| { 0x00d827, 0x00, 0xff }, |
| { 0x00d829, 0x00, 0xff }, |
| { 0x800045, state->cfg.adc_multiplier, 0xff }, |
| }; |
| |
| /* program clock control */ |
| clock_cw = af9033_div(state, state->cfg.clock, 1000000ul, 19ul); |
| buf[0] = (clock_cw >> 0) & 0xff; |
| buf[1] = (clock_cw >> 8) & 0xff; |
| buf[2] = (clock_cw >> 16) & 0xff; |
| buf[3] = (clock_cw >> 24) & 0xff; |
| |
| dev_dbg(&state->i2c->dev, "%s: clock=%d clock_cw=%08x\n", |
| __func__, state->cfg.clock, clock_cw); |
| |
| ret = af9033_wr_regs(state, 0x800025, buf, 4); |
| if (ret < 0) |
| goto err; |
| |
| /* program ADC control */ |
| for (i = 0; i < ARRAY_SIZE(clock_adc_lut); i++) { |
| if (clock_adc_lut[i].clock == state->cfg.clock) |
| break; |
| } |
| |
| adc_cw = af9033_div(state, clock_adc_lut[i].adc, 1000000ul, 19ul); |
| buf[0] = (adc_cw >> 0) & 0xff; |
| buf[1] = (adc_cw >> 8) & 0xff; |
| buf[2] = (adc_cw >> 16) & 0xff; |
| |
| dev_dbg(&state->i2c->dev, "%s: adc=%d adc_cw=%06x\n", |
| __func__, clock_adc_lut[i].adc, adc_cw); |
| |
| ret = af9033_wr_regs(state, 0x80f1cd, buf, 3); |
| if (ret < 0) |
| goto err; |
| |
| /* program register table */ |
| for (i = 0; i < ARRAY_SIZE(tab); i++) { |
| ret = af9033_wr_reg_mask(state, tab[i].reg, tab[i].val, |
| tab[i].mask); |
| if (ret < 0) |
| goto err; |
| } |
| |
| /* settings for TS interface */ |
| if (state->cfg.ts_mode == AF9033_TS_MODE_USB) { |
| ret = af9033_wr_reg_mask(state, 0x80f9a5, 0x00, 0x01); |
| if (ret < 0) |
| goto err; |
| |
| ret = af9033_wr_reg_mask(state, 0x80f9b5, 0x01, 0x01); |
| if (ret < 0) |
| goto err; |
| } else { |
| ret = af9033_wr_reg_mask(state, 0x80f990, 0x00, 0x01); |
| if (ret < 0) |
| goto err; |
| |
| ret = af9033_wr_reg_mask(state, 0x80f9b5, 0x00, 0x01); |
| if (ret < 0) |
| goto err; |
| } |
| |
| /* load OFSM settings */ |
| dev_dbg(&state->i2c->dev, "%s: load ofsm settings\n", __func__); |
| switch (state->cfg.tuner) { |
| case AF9033_TUNER_IT9135_38: |
| case AF9033_TUNER_IT9135_51: |
| case AF9033_TUNER_IT9135_52: |
| len = ARRAY_SIZE(ofsm_init_it9135_v1); |
| init = ofsm_init_it9135_v1; |
| break; |
| case AF9033_TUNER_IT9135_60: |
| case AF9033_TUNER_IT9135_61: |
| case AF9033_TUNER_IT9135_62: |
| len = ARRAY_SIZE(ofsm_init_it9135_v2); |
| init = ofsm_init_it9135_v2; |
| break; |
| default: |
| len = ARRAY_SIZE(ofsm_init); |
| init = ofsm_init; |
| break; |
| } |
| |
| ret = af9033_wr_reg_val_tab(state, init, len); |
| if (ret < 0) |
| goto err; |
| |
| /* load tuner specific settings */ |
| dev_dbg(&state->i2c->dev, "%s: load tuner specific settings\n", |
| __func__); |
| switch (state->cfg.tuner) { |
| case AF9033_TUNER_TUA9001: |
| len = ARRAY_SIZE(tuner_init_tua9001); |
| init = tuner_init_tua9001; |
| break; |
| case AF9033_TUNER_FC0011: |
| len = ARRAY_SIZE(tuner_init_fc0011); |
| init = tuner_init_fc0011; |
| break; |
| case AF9033_TUNER_MXL5007T: |
| len = ARRAY_SIZE(tuner_init_mxl5007t); |
| init = tuner_init_mxl5007t; |
| break; |
| case AF9033_TUNER_TDA18218: |
| len = ARRAY_SIZE(tuner_init_tda18218); |
| init = tuner_init_tda18218; |
| break; |
| case AF9033_TUNER_FC2580: |
| len = ARRAY_SIZE(tuner_init_fc2580); |
| init = tuner_init_fc2580; |
| break; |
| case AF9033_TUNER_FC0012: |
| len = ARRAY_SIZE(tuner_init_fc0012); |
| init = tuner_init_fc0012; |
| break; |
| case AF9033_TUNER_IT9135_38: |
| len = ARRAY_SIZE(tuner_init_it9135_38); |
| init = tuner_init_it9135_38; |
| break; |
| case AF9033_TUNER_IT9135_51: |
| len = ARRAY_SIZE(tuner_init_it9135_51); |
| init = tuner_init_it9135_51; |
| break; |
| case AF9033_TUNER_IT9135_52: |
| len = ARRAY_SIZE(tuner_init_it9135_52); |
| init = tuner_init_it9135_52; |
| break; |
| case AF9033_TUNER_IT9135_60: |
| len = ARRAY_SIZE(tuner_init_it9135_60); |
| init = tuner_init_it9135_60; |
| break; |
| case AF9033_TUNER_IT9135_61: |
| len = ARRAY_SIZE(tuner_init_it9135_61); |
| init = tuner_init_it9135_61; |
| break; |
| case AF9033_TUNER_IT9135_62: |
| len = ARRAY_SIZE(tuner_init_it9135_62); |
| init = tuner_init_it9135_62; |
| break; |
| default: |
| dev_dbg(&state->i2c->dev, "%s: unsupported tuner ID=%d\n", |
| __func__, state->cfg.tuner); |
| ret = -ENODEV; |
| goto err; |
| } |
| |
| ret = af9033_wr_reg_val_tab(state, init, len); |
| if (ret < 0) |
| goto err; |
| |
| if (state->cfg.ts_mode == AF9033_TS_MODE_SERIAL) { |
| ret = af9033_wr_reg_mask(state, 0x00d91c, 0x01, 0x01); |
| if (ret < 0) |
| goto err; |
| |
| ret = af9033_wr_reg_mask(state, 0x00d917, 0x00, 0x01); |
| if (ret < 0) |
| goto err; |
| |
| ret = af9033_wr_reg_mask(state, 0x00d916, 0x00, 0x01); |
| if (ret < 0) |
| goto err; |
| } |
| |
| switch (state->cfg.tuner) { |
| case AF9033_TUNER_IT9135_60: |
| case AF9033_TUNER_IT9135_61: |
| case AF9033_TUNER_IT9135_62: |
| ret = af9033_wr_reg(state, 0x800000, 0x01); |
| if (ret < 0) |
| goto err; |
| } |
| |
| state->bandwidth_hz = 0; /* force to program all parameters */ |
| |
| return 0; |
| |
| err: |
| dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| |
| return ret; |
| } |
| |
| static int af9033_sleep(struct dvb_frontend *fe) |
| { |
| struct af9033_state *state = fe->demodulator_priv; |
| int ret, i; |
| u8 tmp; |
| |
| ret = af9033_wr_reg(state, 0x80004c, 1); |
| if (ret < 0) |
| goto err; |
| |
| ret = af9033_wr_reg(state, 0x800000, 0); |
| if (ret < 0) |
| goto err; |
| |
| for (i = 100, tmp = 1; i && tmp; i--) { |
| ret = af9033_rd_reg(state, 0x80004c, &tmp); |
| if (ret < 0) |
| goto err; |
| |
| usleep_range(200, 10000); |
| } |
| |
| dev_dbg(&state->i2c->dev, "%s: loop=%d\n", __func__, i); |
| |
| if (i == 0) { |
| ret = -ETIMEDOUT; |
| goto err; |
| } |
| |
| ret = af9033_wr_reg_mask(state, 0x80fb24, 0x08, 0x08); |
| if (ret < 0) |
| goto err; |
| |
| /* prevent current leak (?) */ |
| if (state->cfg.ts_mode == AF9033_TS_MODE_SERIAL) { |
| /* enable parallel TS */ |
| ret = af9033_wr_reg_mask(state, 0x00d917, 0x00, 0x01); |
| if (ret < 0) |
| goto err; |
| |
| ret = af9033_wr_reg_mask(state, 0x00d916, 0x01, 0x01); |
| if (ret < 0) |
| goto err; |
| } |
| |
| return 0; |
| |
| err: |
| dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| |
| return ret; |
| } |
| |
| static int af9033_get_tune_settings(struct dvb_frontend *fe, |
| struct dvb_frontend_tune_settings *fesettings) |
| { |
| /* 800 => 2000 because IT9135 v2 is slow to gain lock */ |
| fesettings->min_delay_ms = 2000; |
| fesettings->step_size = 0; |
| fesettings->max_drift = 0; |
| |
| return 0; |
| } |
| |
| static int af9033_set_frontend(struct dvb_frontend *fe) |
| { |
| struct af9033_state *state = fe->demodulator_priv; |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
| int ret, i, spec_inv, sampling_freq; |
| u8 tmp, buf[3], bandwidth_reg_val; |
| u32 if_frequency, freq_cw, adc_freq; |
| |
| dev_dbg(&state->i2c->dev, "%s: frequency=%d bandwidth_hz=%d\n", |
| __func__, c->frequency, c->bandwidth_hz); |
| |
| /* check bandwidth */ |
| switch (c->bandwidth_hz) { |
| case 6000000: |
| bandwidth_reg_val = 0x00; |
| break; |
| case 7000000: |
| bandwidth_reg_val = 0x01; |
| break; |
| case 8000000: |
| bandwidth_reg_val = 0x02; |
| break; |
| default: |
| dev_dbg(&state->i2c->dev, "%s: invalid bandwidth_hz\n", |
| __func__); |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| /* program tuner */ |
| if (fe->ops.tuner_ops.set_params) |
| fe->ops.tuner_ops.set_params(fe); |
| |
| /* program CFOE coefficients */ |
| if (c->bandwidth_hz != state->bandwidth_hz) { |
| for (i = 0; i < ARRAY_SIZE(coeff_lut); i++) { |
| if (coeff_lut[i].clock == state->cfg.clock && |
| coeff_lut[i].bandwidth_hz == c->bandwidth_hz) { |
| break; |
| } |
| } |
| ret = af9033_wr_regs(state, 0x800001, |
| coeff_lut[i].val, sizeof(coeff_lut[i].val)); |
| } |
| |
| /* program frequency control */ |
| if (c->bandwidth_hz != state->bandwidth_hz) { |
| spec_inv = state->cfg.spec_inv ? -1 : 1; |
| |
| for (i = 0; i < ARRAY_SIZE(clock_adc_lut); i++) { |
| if (clock_adc_lut[i].clock == state->cfg.clock) |
| break; |
| } |
| adc_freq = clock_adc_lut[i].adc; |
| |
| /* get used IF frequency */ |
| if (fe->ops.tuner_ops.get_if_frequency) |
| fe->ops.tuner_ops.get_if_frequency(fe, &if_frequency); |
| else |
| if_frequency = 0; |
| |
| sampling_freq = if_frequency; |
| |
| while (sampling_freq > (adc_freq / 2)) |
| sampling_freq -= adc_freq; |
| |
| if (sampling_freq >= 0) |
| spec_inv *= -1; |
| else |
| sampling_freq *= -1; |
| |
| freq_cw = af9033_div(state, sampling_freq, adc_freq, 23ul); |
| |
| if (spec_inv == -1) |
| freq_cw = 0x800000 - freq_cw; |
| |
| if (state->cfg.adc_multiplier == AF9033_ADC_MULTIPLIER_2X) |
| freq_cw /= 2; |
| |
| buf[0] = (freq_cw >> 0) & 0xff; |
| buf[1] = (freq_cw >> 8) & 0xff; |
| buf[2] = (freq_cw >> 16) & 0x7f; |
| |
| /* FIXME: there seems to be calculation error here... */ |
| if (if_frequency == 0) |
| buf[2] = 0; |
| |
| ret = af9033_wr_regs(state, 0x800029, buf, 3); |
| if (ret < 0) |
| goto err; |
| |
| state->bandwidth_hz = c->bandwidth_hz; |
| } |
| |
| ret = af9033_wr_reg_mask(state, 0x80f904, bandwidth_reg_val, 0x03); |
| if (ret < 0) |
| goto err; |
| |
| ret = af9033_wr_reg(state, 0x800040, 0x00); |
| if (ret < 0) |
| goto err; |
| |
| ret = af9033_wr_reg(state, 0x800047, 0x00); |
| if (ret < 0) |
| goto err; |
| |
| ret = af9033_wr_reg_mask(state, 0x80f999, 0x00, 0x01); |
| if (ret < 0) |
| goto err; |
| |
| if (c->frequency <= 230000000) |
| tmp = 0x00; /* VHF */ |
| else |
| tmp = 0x01; /* UHF */ |
| |
| ret = af9033_wr_reg(state, 0x80004b, tmp); |
| if (ret < 0) |
| goto err; |
| |
| ret = af9033_wr_reg(state, 0x800000, 0x00); |
| if (ret < 0) |
| goto err; |
| |
| return 0; |
| |
| err: |
| dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| |
| return ret; |
| } |
| |
| static int af9033_get_frontend(struct dvb_frontend *fe) |
| { |
| struct af9033_state *state = fe->demodulator_priv; |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
| int ret; |
| u8 buf[8]; |
| |
| dev_dbg(&state->i2c->dev, "%s:\n", __func__); |
| |
| /* read all needed registers */ |
| ret = af9033_rd_regs(state, 0x80f900, buf, sizeof(buf)); |
| if (ret < 0) |
| goto err; |
| |
| switch ((buf[0] >> 0) & 3) { |
| case 0: |
| c->transmission_mode = TRANSMISSION_MODE_2K; |
| break; |
| case 1: |
| c->transmission_mode = TRANSMISSION_MODE_8K; |
| break; |
| } |
| |
| switch ((buf[1] >> 0) & 3) { |
| case 0: |
| c->guard_interval = GUARD_INTERVAL_1_32; |
| break; |
| case 1: |
| c->guard_interval = GUARD_INTERVAL_1_16; |
| break; |
| case 2: |
| c->guard_interval = GUARD_INTERVAL_1_8; |
| break; |
| case 3: |
| c->guard_interval = GUARD_INTERVAL_1_4; |
| break; |
| } |
| |
| switch ((buf[2] >> 0) & 7) { |
| case 0: |
| c->hierarchy = HIERARCHY_NONE; |
| break; |
| case 1: |
| c->hierarchy = HIERARCHY_1; |
| break; |
| case 2: |
| c->hierarchy = HIERARCHY_2; |
| break; |
| case 3: |
| c->hierarchy = HIERARCHY_4; |
| break; |
| } |
| |
| switch ((buf[3] >> 0) & 3) { |
| case 0: |
| c->modulation = QPSK; |
| break; |
| case 1: |
| c->modulation = QAM_16; |
| break; |
| case 2: |
| c->modulation = QAM_64; |
| break; |
| } |
| |
| switch ((buf[4] >> 0) & 3) { |
| case 0: |
| c->bandwidth_hz = 6000000; |
| break; |
| case 1: |
| c->bandwidth_hz = 7000000; |
| break; |
| case 2: |
| c->bandwidth_hz = 8000000; |
| break; |
| } |
| |
| switch ((buf[6] >> 0) & 7) { |
| case 0: |
| c->code_rate_HP = FEC_1_2; |
| break; |
| case 1: |
| c->code_rate_HP = FEC_2_3; |
| break; |
| case 2: |
| c->code_rate_HP = FEC_3_4; |
| break; |
| case 3: |
| c->code_rate_HP = FEC_5_6; |
| break; |
| case 4: |
| c->code_rate_HP = FEC_7_8; |
| break; |
| case 5: |
| c->code_rate_HP = FEC_NONE; |
| break; |
| } |
| |
| switch ((buf[7] >> 0) & 7) { |
| case 0: |
| c->code_rate_LP = FEC_1_2; |
| break; |
| case 1: |
| c->code_rate_LP = FEC_2_3; |
| break; |
| case 2: |
| c->code_rate_LP = FEC_3_4; |
| break; |
| case 3: |
| c->code_rate_LP = FEC_5_6; |
| break; |
| case 4: |
| c->code_rate_LP = FEC_7_8; |
| break; |
| case 5: |
| c->code_rate_LP = FEC_NONE; |
| break; |
| } |
| |
| return 0; |
| |
| err: |
| dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| |
| return ret; |
| } |
| |
| static int af9033_read_status(struct dvb_frontend *fe, fe_status_t *status) |
| { |
| struct af9033_state *state = fe->demodulator_priv; |
| int ret; |
| u8 tmp; |
| |
| *status = 0; |
| |
| /* radio channel status, 0=no result, 1=has signal, 2=no signal */ |
| ret = af9033_rd_reg(state, 0x800047, &tmp); |
| if (ret < 0) |
| goto err; |
| |
| /* has signal */ |
| if (tmp == 0x01) |
| *status |= FE_HAS_SIGNAL; |
| |
| if (tmp != 0x02) { |
| /* TPS lock */ |
| ret = af9033_rd_reg_mask(state, 0x80f5a9, &tmp, 0x01); |
| if (ret < 0) |
| goto err; |
| |
| if (tmp) |
| *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | |
| FE_HAS_VITERBI; |
| |
| /* full lock */ |
| ret = af9033_rd_reg_mask(state, 0x80f999, &tmp, 0x01); |
| if (ret < 0) |
| goto err; |
| |
| if (tmp) |
| *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | |
| FE_HAS_VITERBI | FE_HAS_SYNC | |
| FE_HAS_LOCK; |
| } |
| |
| return 0; |
| |
| err: |
| dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| |
| return ret; |
| } |
| |
| static int af9033_read_snr(struct dvb_frontend *fe, u16 *snr) |
| { |
| struct af9033_state *state = fe->demodulator_priv; |
| int ret, i, len; |
| u8 buf[3], tmp; |
| u32 snr_val; |
| const struct val_snr *uninitialized_var(snr_lut); |
| |
| /* read value */ |
| ret = af9033_rd_regs(state, 0x80002c, buf, 3); |
| if (ret < 0) |
| goto err; |
| |
| snr_val = (buf[2] << 16) | (buf[1] << 8) | buf[0]; |
| |
| /* read current modulation */ |
| ret = af9033_rd_reg(state, 0x80f903, &tmp); |
| if (ret < 0) |
| goto err; |
| |
| switch ((tmp >> 0) & 3) { |
| case 0: |
| len = ARRAY_SIZE(qpsk_snr_lut); |
| snr_lut = qpsk_snr_lut; |
| break; |
| case 1: |
| len = ARRAY_SIZE(qam16_snr_lut); |
| snr_lut = qam16_snr_lut; |
| break; |
| case 2: |
| len = ARRAY_SIZE(qam64_snr_lut); |
| snr_lut = qam64_snr_lut; |
| break; |
| default: |
| goto err; |
| } |
| |
| for (i = 0; i < len; i++) { |
| tmp = snr_lut[i].snr; |
| |
| if (snr_val < snr_lut[i].val) |
| break; |
| } |
| |
| *snr = tmp * 10; /* dB/10 */ |
| |
| return 0; |
| |
| err: |
| dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| |
| return ret; |
| } |
| |
| static int af9033_read_signal_strength(struct dvb_frontend *fe, u16 *strength) |
| { |
| struct af9033_state *state = fe->demodulator_priv; |
| int ret; |
| u8 strength2; |
| |
| /* read signal strength of 0-100 scale */ |
| ret = af9033_rd_reg(state, 0x800048, &strength2); |
| if (ret < 0) |
| goto err; |
| |
| /* scale value to 0x0000-0xffff */ |
| *strength = strength2 * 0xffff / 100; |
| |
| return 0; |
| |
| err: |
| dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| |
| return ret; |
| } |
| |
| static int af9033_update_ch_stat(struct af9033_state *state) |
| { |
| int ret = 0; |
| u32 err_cnt, bit_cnt; |
| u16 abort_cnt; |
| u8 buf[7]; |
| |
| /* only update data every half second */ |
| if (time_after(jiffies, state->last_stat_check + msecs_to_jiffies(500))) { |
| ret = af9033_rd_regs(state, 0x800032, buf, sizeof(buf)); |
| if (ret < 0) |
| goto err; |
| /* in 8 byte packets? */ |
| abort_cnt = (buf[1] << 8) + buf[0]; |
| /* in bits */ |
| err_cnt = (buf[4] << 16) + (buf[3] << 8) + buf[2]; |
| /* in 8 byte packets? always(?) 0x2710 = 10000 */ |
| bit_cnt = (buf[6] << 8) + buf[5]; |
| |
| if (bit_cnt < abort_cnt) { |
| abort_cnt = 1000; |
| state->ber = 0xffffffff; |
| } else { |
| /* 8 byte packets, that have not been rejected already */ |
| bit_cnt -= (u32)abort_cnt; |
| if (bit_cnt == 0) { |
| state->ber = 0xffffffff; |
| } else { |
| err_cnt -= (u32)abort_cnt * 8 * 8; |
| bit_cnt *= 8 * 8; |
| state->ber = err_cnt * (0xffffffff / bit_cnt); |
| } |
| } |
| state->ucb += abort_cnt; |
| state->last_stat_check = jiffies; |
| } |
| |
| return 0; |
| err: |
| dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| |
| return ret; |
| } |
| |
| static int af9033_read_ber(struct dvb_frontend *fe, u32 *ber) |
| { |
| struct af9033_state *state = fe->demodulator_priv; |
| int ret; |
| |
| ret = af9033_update_ch_stat(state); |
| if (ret < 0) |
| return ret; |
| |
| *ber = state->ber; |
| |
| return 0; |
| } |
| |
| static int af9033_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) |
| { |
| struct af9033_state *state = fe->demodulator_priv; |
| int ret; |
| |
| ret = af9033_update_ch_stat(state); |
| if (ret < 0) |
| return ret; |
| |
| *ucblocks = state->ucb; |
| |
| return 0; |
| } |
| |
| static int af9033_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) |
| { |
| struct af9033_state *state = fe->demodulator_priv; |
| int ret; |
| |
| dev_dbg(&state->i2c->dev, "%s: enable=%d\n", __func__, enable); |
| |
| ret = af9033_wr_reg_mask(state, 0x00fa04, enable, 0x01); |
| if (ret < 0) |
| goto err; |
| |
| return 0; |
| |
| err: |
| dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret); |
| |
| return ret; |
| } |
| |
| static struct dvb_frontend_ops af9033_ops; |
| |
| struct dvb_frontend *af9033_attach(const struct af9033_config *config, |
| struct i2c_adapter *i2c) |
| { |
| int ret; |
| struct af9033_state *state; |
| u8 buf[8]; |
| |
| dev_dbg(&i2c->dev, "%s:\n", __func__); |
| |
| /* allocate memory for the internal state */ |
| state = kzalloc(sizeof(struct af9033_state), GFP_KERNEL); |
| if (state == NULL) |
| goto err; |
| |
| /* setup the state */ |
| state->i2c = i2c; |
| memcpy(&state->cfg, config, sizeof(struct af9033_config)); |
| |
| if (state->cfg.clock != 12000000) { |
| dev_err(&state->i2c->dev, "%s: af9033: unsupported clock=%d, " \ |
| "only 12000000 Hz is supported currently\n", |
| KBUILD_MODNAME, state->cfg.clock); |
| goto err; |
| } |
| |
| /* firmware version */ |
| ret = af9033_rd_regs(state, 0x0083e9, &buf[0], 4); |
| if (ret < 0) |
| goto err; |
| |
| ret = af9033_rd_regs(state, 0x804191, &buf[4], 4); |
| if (ret < 0) |
| goto err; |
| |
| dev_info(&state->i2c->dev, "%s: firmware version: LINK=%d.%d.%d.%d " \ |
| "OFDM=%d.%d.%d.%d\n", KBUILD_MODNAME, buf[0], buf[1], |
| buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]); |
| |
| /* sleep */ |
| switch (state->cfg.tuner) { |
| case AF9033_TUNER_IT9135_38: |
| case AF9033_TUNER_IT9135_51: |
| case AF9033_TUNER_IT9135_52: |
| case AF9033_TUNER_IT9135_60: |
| case AF9033_TUNER_IT9135_61: |
| case AF9033_TUNER_IT9135_62: |
| /* IT9135 did not like to sleep at that early */ |
| break; |
| default: |
| ret = af9033_wr_reg(state, 0x80004c, 1); |
| if (ret < 0) |
| goto err; |
| |
| ret = af9033_wr_reg(state, 0x800000, 0); |
| if (ret < 0) |
| goto err; |
| } |
| |
| /* configure internal TS mode */ |
| switch (state->cfg.ts_mode) { |
| case AF9033_TS_MODE_PARALLEL: |
| state->ts_mode_parallel = true; |
| break; |
| case AF9033_TS_MODE_SERIAL: |
| state->ts_mode_serial = true; |
| break; |
| case AF9033_TS_MODE_USB: |
| /* usb mode for AF9035 */ |
| default: |
| break; |
| } |
| |
| /* create dvb_frontend */ |
| memcpy(&state->fe.ops, &af9033_ops, sizeof(struct dvb_frontend_ops)); |
| state->fe.demodulator_priv = state; |
| |
| return &state->fe; |
| |
| err: |
| kfree(state); |
| return NULL; |
| } |
| EXPORT_SYMBOL(af9033_attach); |
| |
| static struct dvb_frontend_ops af9033_ops = { |
| .delsys = { SYS_DVBT }, |
| .info = { |
| .name = "Afatech AF9033 (DVB-T)", |
| .frequency_min = 174000000, |
| .frequency_max = 862000000, |
| .frequency_stepsize = 250000, |
| .frequency_tolerance = 0, |
| .caps = FE_CAN_FEC_1_2 | |
| FE_CAN_FEC_2_3 | |
| FE_CAN_FEC_3_4 | |
| FE_CAN_FEC_5_6 | |
| FE_CAN_FEC_7_8 | |
| FE_CAN_FEC_AUTO | |
| FE_CAN_QPSK | |
| FE_CAN_QAM_16 | |
| FE_CAN_QAM_64 | |
| FE_CAN_QAM_AUTO | |
| FE_CAN_TRANSMISSION_MODE_AUTO | |
| FE_CAN_GUARD_INTERVAL_AUTO | |
| FE_CAN_HIERARCHY_AUTO | |
| FE_CAN_RECOVER | |
| FE_CAN_MUTE_TS |
| }, |
| |
| .release = af9033_release, |
| |
| .init = af9033_init, |
| .sleep = af9033_sleep, |
| |
| .get_tune_settings = af9033_get_tune_settings, |
| .set_frontend = af9033_set_frontend, |
| .get_frontend = af9033_get_frontend, |
| |
| .read_status = af9033_read_status, |
| .read_snr = af9033_read_snr, |
| .read_signal_strength = af9033_read_signal_strength, |
| .read_ber = af9033_read_ber, |
| .read_ucblocks = af9033_read_ucblocks, |
| |
| .i2c_gate_ctrl = af9033_i2c_gate_ctrl, |
| }; |
| |
| MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); |
| MODULE_DESCRIPTION("Afatech AF9033 DVB-T demodulator driver"); |
| MODULE_LICENSE("GPL"); |