| /*-*-linux-c-*-*/ |
| |
| /* |
| Copyright (C) 2007,2008 Jonathan Woithe <jwoithe@just42.net> |
| Copyright (C) 2008 Peter Gruber <nokos@gmx.net> |
| Copyright (C) 2008 Tony Vroon <tony@linx.net> |
| Based on earlier work: |
| Copyright (C) 2003 Shane Spencer <shane@bogomip.com> |
| Adrian Yee <brewt-fujitsu@brewt.org> |
| |
| Templated from msi-laptop.c and thinkpad_acpi.c which is copyright |
| by its respective authors. |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, but |
| WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA |
| 02110-1301, USA. |
| */ |
| |
| /* |
| * fujitsu-laptop.c - Fujitsu laptop support, providing access to additional |
| * features made available on a range of Fujitsu laptops including the |
| * P2xxx/P5xxx/S6xxx/S7xxx series. |
| * |
| * This driver exports a few files in /sys/devices/platform/fujitsu-laptop/; |
| * others may be added at a later date. |
| * |
| * lcd_level - Screen brightness: contains a single integer in the |
| * range 0..7. (rw) |
| * |
| * In addition to these platform device attributes the driver |
| * registers itself in the Linux backlight control subsystem and is |
| * available to userspace under /sys/class/backlight/fujitsu-laptop/. |
| * |
| * Hotkeys present on certain Fujitsu laptops (eg: the S6xxx series) are |
| * also supported by this driver. |
| * |
| * This driver has been tested on a Fujitsu Lifebook S6410, S7020 and |
| * P8010. It should work on most P-series and S-series Lifebooks, but |
| * YMMV. |
| * |
| * The module parameter use_alt_lcd_levels switches between different ACPI |
| * brightness controls which are used by different Fujitsu laptops. In most |
| * cases the correct method is automatically detected. "use_alt_lcd_levels=1" |
| * is applicable for a Fujitsu Lifebook S6410 if autodetection fails. |
| * |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/acpi.h> |
| #include <linux/dmi.h> |
| #include <linux/backlight.h> |
| #include <linux/fb.h> |
| #include <linux/input.h> |
| #include <linux/kfifo.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE) |
| #include <linux/leds.h> |
| #endif |
| |
| #define FUJITSU_DRIVER_VERSION "0.6.0" |
| |
| #define FUJITSU_LCD_N_LEVELS 8 |
| |
| #define ACPI_FUJITSU_CLASS "fujitsu" |
| #define ACPI_FUJITSU_HID "FUJ02B1" |
| #define ACPI_FUJITSU_DRIVER_NAME "Fujitsu laptop FUJ02B1 ACPI brightness driver" |
| #define ACPI_FUJITSU_DEVICE_NAME "Fujitsu FUJ02B1" |
| #define ACPI_FUJITSU_HOTKEY_HID "FUJ02E3" |
| #define ACPI_FUJITSU_HOTKEY_DRIVER_NAME "Fujitsu laptop FUJ02E3 ACPI hotkeys driver" |
| #define ACPI_FUJITSU_HOTKEY_DEVICE_NAME "Fujitsu FUJ02E3" |
| |
| #define ACPI_FUJITSU_NOTIFY_CODE1 0x80 |
| |
| #define ACPI_VIDEO_NOTIFY_INC_BRIGHTNESS 0x86 |
| #define ACPI_VIDEO_NOTIFY_DEC_BRIGHTNESS 0x87 |
| |
| /* FUNC interface - command values */ |
| #define FUNC_RFKILL 0x1000 |
| #define FUNC_LEDS 0x1001 |
| #define FUNC_BUTTONS 0x1002 |
| #define FUNC_BACKLIGHT 0x1004 |
| |
| /* FUNC interface - responses */ |
| #define UNSUPPORTED_CMD 0x80000000 |
| |
| #if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE) |
| /* FUNC interface - LED control */ |
| #define FUNC_LED_OFF 0x1 |
| #define FUNC_LED_ON 0x30001 |
| #define KEYBOARD_LAMPS 0x100 |
| #define LOGOLAMP_POWERON 0x2000 |
| #define LOGOLAMP_ALWAYS 0x4000 |
| #endif |
| |
| /* Hotkey details */ |
| #define KEY1_CODE 0x410 /* codes for the keys in the GIRB register */ |
| #define KEY2_CODE 0x411 |
| #define KEY3_CODE 0x412 |
| #define KEY4_CODE 0x413 |
| |
| #define MAX_HOTKEY_RINGBUFFER_SIZE 100 |
| #define RINGBUFFERSIZE 40 |
| |
| /* Debugging */ |
| #define FUJLAPTOP_LOG ACPI_FUJITSU_HID ": " |
| #define FUJLAPTOP_ERR KERN_ERR FUJLAPTOP_LOG |
| #define FUJLAPTOP_NOTICE KERN_NOTICE FUJLAPTOP_LOG |
| #define FUJLAPTOP_INFO KERN_INFO FUJLAPTOP_LOG |
| #define FUJLAPTOP_DEBUG KERN_DEBUG FUJLAPTOP_LOG |
| |
| #define FUJLAPTOP_DBG_ALL 0xffff |
| #define FUJLAPTOP_DBG_ERROR 0x0001 |
| #define FUJLAPTOP_DBG_WARN 0x0002 |
| #define FUJLAPTOP_DBG_INFO 0x0004 |
| #define FUJLAPTOP_DBG_TRACE 0x0008 |
| |
| #ifdef CONFIG_FUJITSU_LAPTOP_DEBUG |
| #define vdbg_printk(a_dbg_level, format, arg...) \ |
| do { if (dbg_level & a_dbg_level) \ |
| printk(FUJLAPTOP_DEBUG "%s: " format, __func__ , ## arg); \ |
| } while (0) |
| #else |
| #define vdbg_printk(a_dbg_level, format, arg...) \ |
| do { } while (0) |
| #endif |
| |
| /* Device controlling the backlight and associated keys */ |
| struct fujitsu_t { |
| acpi_handle acpi_handle; |
| struct acpi_device *dev; |
| struct input_dev *input; |
| char phys[32]; |
| struct backlight_device *bl_device; |
| struct platform_device *pf_device; |
| int keycode1, keycode2, keycode3, keycode4; |
| |
| unsigned int max_brightness; |
| unsigned int brightness_changed; |
| unsigned int brightness_level; |
| }; |
| |
| static struct fujitsu_t *fujitsu; |
| static int use_alt_lcd_levels = -1; |
| static int disable_brightness_adjust = -1; |
| |
| /* Device used to access other hotkeys on the laptop */ |
| struct fujitsu_hotkey_t { |
| acpi_handle acpi_handle; |
| struct acpi_device *dev; |
| struct input_dev *input; |
| char phys[32]; |
| struct platform_device *pf_device; |
| struct kfifo fifo; |
| spinlock_t fifo_lock; |
| int rfkill_supported; |
| int rfkill_state; |
| int logolamp_registered; |
| int kblamps_registered; |
| }; |
| |
| static struct fujitsu_hotkey_t *fujitsu_hotkey; |
| |
| static void acpi_fujitsu_hotkey_notify(struct acpi_device *device, u32 event); |
| |
| #if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE) |
| static enum led_brightness logolamp_get(struct led_classdev *cdev); |
| static void logolamp_set(struct led_classdev *cdev, |
| enum led_brightness brightness); |
| |
| static struct led_classdev logolamp_led = { |
| .name = "fujitsu::logolamp", |
| .brightness_get = logolamp_get, |
| .brightness_set = logolamp_set |
| }; |
| |
| static enum led_brightness kblamps_get(struct led_classdev *cdev); |
| static void kblamps_set(struct led_classdev *cdev, |
| enum led_brightness brightness); |
| |
| static struct led_classdev kblamps_led = { |
| .name = "fujitsu::kblamps", |
| .brightness_get = kblamps_get, |
| .brightness_set = kblamps_set |
| }; |
| #endif |
| |
| #ifdef CONFIG_FUJITSU_LAPTOP_DEBUG |
| static u32 dbg_level = 0x03; |
| #endif |
| |
| static void acpi_fujitsu_notify(struct acpi_device *device, u32 event); |
| |
| /* Fujitsu ACPI interface function */ |
| |
| static int call_fext_func(int cmd, int arg0, int arg1, int arg2) |
| { |
| acpi_status status = AE_OK; |
| union acpi_object params[4] = { |
| { .type = ACPI_TYPE_INTEGER }, |
| { .type = ACPI_TYPE_INTEGER }, |
| { .type = ACPI_TYPE_INTEGER }, |
| { .type = ACPI_TYPE_INTEGER } |
| }; |
| struct acpi_object_list arg_list = { 4, ¶ms[0] }; |
| unsigned long long value; |
| acpi_handle handle = NULL; |
| |
| status = acpi_get_handle(fujitsu_hotkey->acpi_handle, "FUNC", &handle); |
| if (ACPI_FAILURE(status)) { |
| vdbg_printk(FUJLAPTOP_DBG_ERROR, |
| "FUNC interface is not present\n"); |
| return -ENODEV; |
| } |
| |
| params[0].integer.value = cmd; |
| params[1].integer.value = arg0; |
| params[2].integer.value = arg1; |
| params[3].integer.value = arg2; |
| |
| status = acpi_evaluate_integer(handle, NULL, &arg_list, &value); |
| if (ACPI_FAILURE(status)) { |
| vdbg_printk(FUJLAPTOP_DBG_WARN, |
| "FUNC 0x%x (args 0x%x, 0x%x, 0x%x) call failed\n", |
| cmd, arg0, arg1, arg2); |
| return -ENODEV; |
| } |
| |
| vdbg_printk(FUJLAPTOP_DBG_TRACE, |
| "FUNC 0x%x (args 0x%x, 0x%x, 0x%x) returned 0x%x\n", |
| cmd, arg0, arg1, arg2, (int)value); |
| return value; |
| } |
| |
| #if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE) |
| /* LED class callbacks */ |
| |
| static void logolamp_set(struct led_classdev *cdev, |
| enum led_brightness brightness) |
| { |
| if (brightness >= LED_FULL) { |
| call_fext_func(FUNC_LEDS, 0x1, LOGOLAMP_POWERON, FUNC_LED_ON); |
| call_fext_func(FUNC_LEDS, 0x1, LOGOLAMP_ALWAYS, FUNC_LED_ON); |
| } else if (brightness >= LED_HALF) { |
| call_fext_func(FUNC_LEDS, 0x1, LOGOLAMP_POWERON, FUNC_LED_ON); |
| call_fext_func(FUNC_LEDS, 0x1, LOGOLAMP_ALWAYS, FUNC_LED_OFF); |
| } else { |
| call_fext_func(FUNC_LEDS, 0x1, LOGOLAMP_POWERON, FUNC_LED_OFF); |
| } |
| } |
| |
| static void kblamps_set(struct led_classdev *cdev, |
| enum led_brightness brightness) |
| { |
| if (brightness >= LED_FULL) |
| call_fext_func(FUNC_LEDS, 0x1, KEYBOARD_LAMPS, FUNC_LED_ON); |
| else |
| call_fext_func(FUNC_LEDS, 0x1, KEYBOARD_LAMPS, FUNC_LED_OFF); |
| } |
| |
| static enum led_brightness logolamp_get(struct led_classdev *cdev) |
| { |
| enum led_brightness brightness = LED_OFF; |
| int poweron, always; |
| |
| poweron = call_fext_func(FUNC_LEDS, 0x2, LOGOLAMP_POWERON, 0x0); |
| if (poweron == FUNC_LED_ON) { |
| brightness = LED_HALF; |
| always = call_fext_func(FUNC_LEDS, 0x2, LOGOLAMP_ALWAYS, 0x0); |
| if (always == FUNC_LED_ON) |
| brightness = LED_FULL; |
| } |
| return brightness; |
| } |
| |
| static enum led_brightness kblamps_get(struct led_classdev *cdev) |
| { |
| enum led_brightness brightness = LED_OFF; |
| |
| if (call_fext_func(FUNC_LEDS, 0x2, KEYBOARD_LAMPS, 0x0) == FUNC_LED_ON) |
| brightness = LED_FULL; |
| |
| return brightness; |
| } |
| #endif |
| |
| /* Hardware access for LCD brightness control */ |
| |
| static int set_lcd_level(int level) |
| { |
| acpi_status status = AE_OK; |
| acpi_handle handle = NULL; |
| |
| vdbg_printk(FUJLAPTOP_DBG_TRACE, "set lcd level via SBLL [%d]\n", |
| level); |
| |
| if (level < 0 || level >= fujitsu->max_brightness) |
| return -EINVAL; |
| |
| status = acpi_get_handle(fujitsu->acpi_handle, "SBLL", &handle); |
| if (ACPI_FAILURE(status)) { |
| vdbg_printk(FUJLAPTOP_DBG_ERROR, "SBLL not present\n"); |
| return -ENODEV; |
| } |
| |
| |
| status = acpi_execute_simple_method(handle, NULL, level); |
| if (ACPI_FAILURE(status)) |
| return -ENODEV; |
| |
| return 0; |
| } |
| |
| static int set_lcd_level_alt(int level) |
| { |
| acpi_status status = AE_OK; |
| acpi_handle handle = NULL; |
| |
| vdbg_printk(FUJLAPTOP_DBG_TRACE, "set lcd level via SBL2 [%d]\n", |
| level); |
| |
| if (level < 0 || level >= fujitsu->max_brightness) |
| return -EINVAL; |
| |
| status = acpi_get_handle(fujitsu->acpi_handle, "SBL2", &handle); |
| if (ACPI_FAILURE(status)) { |
| vdbg_printk(FUJLAPTOP_DBG_ERROR, "SBL2 not present\n"); |
| return -ENODEV; |
| } |
| |
| status = acpi_execute_simple_method(handle, NULL, level); |
| if (ACPI_FAILURE(status)) |
| return -ENODEV; |
| |
| return 0; |
| } |
| |
| static int get_lcd_level(void) |
| { |
| unsigned long long state = 0; |
| acpi_status status = AE_OK; |
| |
| vdbg_printk(FUJLAPTOP_DBG_TRACE, "get lcd level via GBLL\n"); |
| |
| status = |
| acpi_evaluate_integer(fujitsu->acpi_handle, "GBLL", NULL, &state); |
| if (ACPI_FAILURE(status)) |
| return 0; |
| |
| fujitsu->brightness_level = state & 0x0fffffff; |
| |
| if (state & 0x80000000) |
| fujitsu->brightness_changed = 1; |
| else |
| fujitsu->brightness_changed = 0; |
| |
| return fujitsu->brightness_level; |
| } |
| |
| static int get_max_brightness(void) |
| { |
| unsigned long long state = 0; |
| acpi_status status = AE_OK; |
| |
| vdbg_printk(FUJLAPTOP_DBG_TRACE, "get max lcd level via RBLL\n"); |
| |
| status = |
| acpi_evaluate_integer(fujitsu->acpi_handle, "RBLL", NULL, &state); |
| if (ACPI_FAILURE(status)) |
| return -1; |
| |
| fujitsu->max_brightness = state; |
| |
| return fujitsu->max_brightness; |
| } |
| |
| /* Backlight device stuff */ |
| |
| static int bl_get_brightness(struct backlight_device *b) |
| { |
| return get_lcd_level(); |
| } |
| |
| static int bl_update_status(struct backlight_device *b) |
| { |
| int ret; |
| if (b->props.power == FB_BLANK_POWERDOWN) |
| ret = call_fext_func(FUNC_BACKLIGHT, 0x1, 0x4, 0x3); |
| else |
| ret = call_fext_func(FUNC_BACKLIGHT, 0x1, 0x4, 0x0); |
| if (ret != 0) |
| vdbg_printk(FUJLAPTOP_DBG_ERROR, |
| "Unable to adjust backlight power, error code %i\n", |
| ret); |
| |
| if (use_alt_lcd_levels) |
| ret = set_lcd_level_alt(b->props.brightness); |
| else |
| ret = set_lcd_level(b->props.brightness); |
| if (ret != 0) |
| vdbg_printk(FUJLAPTOP_DBG_ERROR, |
| "Unable to adjust LCD brightness, error code %i\n", |
| ret); |
| return ret; |
| } |
| |
| static const struct backlight_ops fujitsubl_ops = { |
| .get_brightness = bl_get_brightness, |
| .update_status = bl_update_status, |
| }; |
| |
| /* Platform LCD brightness device */ |
| |
| static ssize_t |
| show_max_brightness(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| |
| int ret; |
| |
| ret = get_max_brightness(); |
| if (ret < 0) |
| return ret; |
| |
| return sprintf(buf, "%i\n", ret); |
| } |
| |
| static ssize_t |
| show_brightness_changed(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| |
| int ret; |
| |
| ret = fujitsu->brightness_changed; |
| if (ret < 0) |
| return ret; |
| |
| return sprintf(buf, "%i\n", ret); |
| } |
| |
| static ssize_t show_lcd_level(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| |
| int ret; |
| |
| ret = get_lcd_level(); |
| if (ret < 0) |
| return ret; |
| |
| return sprintf(buf, "%i\n", ret); |
| } |
| |
| static ssize_t store_lcd_level(struct device *dev, |
| struct device_attribute *attr, const char *buf, |
| size_t count) |
| { |
| |
| int level, ret; |
| |
| if (sscanf(buf, "%i", &level) != 1 |
| || (level < 0 || level >= fujitsu->max_brightness)) |
| return -EINVAL; |
| |
| if (use_alt_lcd_levels) |
| ret = set_lcd_level_alt(level); |
| else |
| ret = set_lcd_level(level); |
| if (ret < 0) |
| return ret; |
| |
| ret = get_lcd_level(); |
| if (ret < 0) |
| return ret; |
| |
| return count; |
| } |
| |
| static ssize_t |
| ignore_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t count) |
| { |
| return count; |
| } |
| |
| static ssize_t |
| show_lid_state(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| if (!(fujitsu_hotkey->rfkill_supported & 0x100)) |
| return sprintf(buf, "unknown\n"); |
| if (fujitsu_hotkey->rfkill_state & 0x100) |
| return sprintf(buf, "open\n"); |
| else |
| return sprintf(buf, "closed\n"); |
| } |
| |
| static ssize_t |
| show_dock_state(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| if (!(fujitsu_hotkey->rfkill_supported & 0x200)) |
| return sprintf(buf, "unknown\n"); |
| if (fujitsu_hotkey->rfkill_state & 0x200) |
| return sprintf(buf, "docked\n"); |
| else |
| return sprintf(buf, "undocked\n"); |
| } |
| |
| static ssize_t |
| show_radios_state(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| if (!(fujitsu_hotkey->rfkill_supported & 0x20)) |
| return sprintf(buf, "unknown\n"); |
| if (fujitsu_hotkey->rfkill_state & 0x20) |
| return sprintf(buf, "on\n"); |
| else |
| return sprintf(buf, "killed\n"); |
| } |
| |
| static DEVICE_ATTR(max_brightness, 0444, show_max_brightness, ignore_store); |
| static DEVICE_ATTR(brightness_changed, 0444, show_brightness_changed, |
| ignore_store); |
| static DEVICE_ATTR(lcd_level, 0644, show_lcd_level, store_lcd_level); |
| static DEVICE_ATTR(lid, 0444, show_lid_state, ignore_store); |
| static DEVICE_ATTR(dock, 0444, show_dock_state, ignore_store); |
| static DEVICE_ATTR(radios, 0444, show_radios_state, ignore_store); |
| |
| static struct attribute *fujitsupf_attributes[] = { |
| &dev_attr_brightness_changed.attr, |
| &dev_attr_max_brightness.attr, |
| &dev_attr_lcd_level.attr, |
| &dev_attr_lid.attr, |
| &dev_attr_dock.attr, |
| &dev_attr_radios.attr, |
| NULL |
| }; |
| |
| static struct attribute_group fujitsupf_attribute_group = { |
| .attrs = fujitsupf_attributes |
| }; |
| |
| static struct platform_driver fujitsupf_driver = { |
| .driver = { |
| .name = "fujitsu-laptop", |
| } |
| }; |
| |
| static void __init dmi_check_cb_common(const struct dmi_system_id *id) |
| { |
| pr_info("Identified laptop model '%s'\n", id->ident); |
| if (use_alt_lcd_levels == -1) { |
| if (acpi_has_method(NULL, |
| "\\_SB.PCI0.LPCB.FJEX.SBL2")) |
| use_alt_lcd_levels = 1; |
| else |
| use_alt_lcd_levels = 0; |
| vdbg_printk(FUJLAPTOP_DBG_TRACE, "auto-detected usealt as " |
| "%i\n", use_alt_lcd_levels); |
| } |
| } |
| |
| static int __init dmi_check_cb_s6410(const struct dmi_system_id *id) |
| { |
| dmi_check_cb_common(id); |
| fujitsu->keycode1 = KEY_SCREENLOCK; /* "Lock" */ |
| fujitsu->keycode2 = KEY_HELP; /* "Mobility Center" */ |
| return 1; |
| } |
| |
| static int __init dmi_check_cb_s6420(const struct dmi_system_id *id) |
| { |
| dmi_check_cb_common(id); |
| fujitsu->keycode1 = KEY_SCREENLOCK; /* "Lock" */ |
| fujitsu->keycode2 = KEY_HELP; /* "Mobility Center" */ |
| return 1; |
| } |
| |
| static int __init dmi_check_cb_p8010(const struct dmi_system_id *id) |
| { |
| dmi_check_cb_common(id); |
| fujitsu->keycode1 = KEY_HELP; /* "Support" */ |
| fujitsu->keycode3 = KEY_SWITCHVIDEOMODE; /* "Presentation" */ |
| fujitsu->keycode4 = KEY_WWW; /* "Internet" */ |
| return 1; |
| } |
| |
| static const struct dmi_system_id fujitsu_dmi_table[] __initconst = { |
| { |
| .ident = "Fujitsu Siemens S6410", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK S6410"), |
| }, |
| .callback = dmi_check_cb_s6410}, |
| { |
| .ident = "Fujitsu Siemens S6420", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK S6420"), |
| }, |
| .callback = dmi_check_cb_s6420}, |
| { |
| .ident = "Fujitsu LifeBook P8010", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook P8010"), |
| }, |
| .callback = dmi_check_cb_p8010}, |
| {} |
| }; |
| |
| /* ACPI device for LCD brightness control */ |
| |
| static int acpi_fujitsu_add(struct acpi_device *device) |
| { |
| int state = 0; |
| struct input_dev *input; |
| int error; |
| |
| if (!device) |
| return -EINVAL; |
| |
| fujitsu->acpi_handle = device->handle; |
| sprintf(acpi_device_name(device), "%s", ACPI_FUJITSU_DEVICE_NAME); |
| sprintf(acpi_device_class(device), "%s", ACPI_FUJITSU_CLASS); |
| device->driver_data = fujitsu; |
| |
| fujitsu->input = input = input_allocate_device(); |
| if (!input) { |
| error = -ENOMEM; |
| goto err_stop; |
| } |
| |
| snprintf(fujitsu->phys, sizeof(fujitsu->phys), |
| "%s/video/input0", acpi_device_hid(device)); |
| |
| input->name = acpi_device_name(device); |
| input->phys = fujitsu->phys; |
| input->id.bustype = BUS_HOST; |
| input->id.product = 0x06; |
| input->dev.parent = &device->dev; |
| input->evbit[0] = BIT(EV_KEY); |
| set_bit(KEY_BRIGHTNESSUP, input->keybit); |
| set_bit(KEY_BRIGHTNESSDOWN, input->keybit); |
| set_bit(KEY_UNKNOWN, input->keybit); |
| |
| error = input_register_device(input); |
| if (error) |
| goto err_free_input_dev; |
| |
| error = acpi_bus_update_power(fujitsu->acpi_handle, &state); |
| if (error) { |
| pr_err("Error reading power state\n"); |
| goto err_unregister_input_dev; |
| } |
| |
| pr_info("ACPI: %s [%s] (%s)\n", |
| acpi_device_name(device), acpi_device_bid(device), |
| !device->power.state ? "on" : "off"); |
| |
| fujitsu->dev = device; |
| |
| if (acpi_has_method(device->handle, METHOD_NAME__INI)) { |
| vdbg_printk(FUJLAPTOP_DBG_INFO, "Invoking _INI\n"); |
| if (ACPI_FAILURE |
| (acpi_evaluate_object |
| (device->handle, METHOD_NAME__INI, NULL, NULL))) |
| pr_err("_INI Method failed\n"); |
| } |
| |
| /* do config (detect defaults) */ |
| use_alt_lcd_levels = use_alt_lcd_levels == 1 ? 1 : 0; |
| disable_brightness_adjust = disable_brightness_adjust == 1 ? 1 : 0; |
| vdbg_printk(FUJLAPTOP_DBG_INFO, |
| "config: [alt interface: %d], [adjust disable: %d]\n", |
| use_alt_lcd_levels, disable_brightness_adjust); |
| |
| if (get_max_brightness() <= 0) |
| fujitsu->max_brightness = FUJITSU_LCD_N_LEVELS; |
| get_lcd_level(); |
| |
| return 0; |
| |
| err_unregister_input_dev: |
| input_unregister_device(input); |
| input = NULL; |
| err_free_input_dev: |
| input_free_device(input); |
| err_stop: |
| return error; |
| } |
| |
| static int acpi_fujitsu_remove(struct acpi_device *device) |
| { |
| struct fujitsu_t *fujitsu = acpi_driver_data(device); |
| struct input_dev *input = fujitsu->input; |
| |
| input_unregister_device(input); |
| |
| fujitsu->acpi_handle = NULL; |
| |
| return 0; |
| } |
| |
| /* Brightness notify */ |
| |
| static void acpi_fujitsu_notify(struct acpi_device *device, u32 event) |
| { |
| struct input_dev *input; |
| int keycode; |
| int oldb, newb; |
| |
| input = fujitsu->input; |
| |
| switch (event) { |
| case ACPI_FUJITSU_NOTIFY_CODE1: |
| keycode = 0; |
| oldb = fujitsu->brightness_level; |
| get_lcd_level(); |
| newb = fujitsu->brightness_level; |
| |
| vdbg_printk(FUJLAPTOP_DBG_TRACE, |
| "brightness button event [%i -> %i (%i)]\n", |
| oldb, newb, fujitsu->brightness_changed); |
| |
| if (oldb < newb) { |
| if (disable_brightness_adjust != 1) { |
| if (use_alt_lcd_levels) |
| set_lcd_level_alt(newb); |
| else |
| set_lcd_level(newb); |
| } |
| keycode = KEY_BRIGHTNESSUP; |
| } else if (oldb > newb) { |
| if (disable_brightness_adjust != 1) { |
| if (use_alt_lcd_levels) |
| set_lcd_level_alt(newb); |
| else |
| set_lcd_level(newb); |
| } |
| keycode = KEY_BRIGHTNESSDOWN; |
| } |
| break; |
| default: |
| keycode = KEY_UNKNOWN; |
| vdbg_printk(FUJLAPTOP_DBG_WARN, |
| "unsupported event [0x%x]\n", event); |
| break; |
| } |
| |
| if (keycode != 0) { |
| input_report_key(input, keycode, 1); |
| input_sync(input); |
| input_report_key(input, keycode, 0); |
| input_sync(input); |
| } |
| } |
| |
| /* ACPI device for hotkey handling */ |
| |
| static int acpi_fujitsu_hotkey_add(struct acpi_device *device) |
| { |
| int result = 0; |
| int state = 0; |
| struct input_dev *input; |
| int error; |
| int i; |
| |
| if (!device) |
| return -EINVAL; |
| |
| fujitsu_hotkey->acpi_handle = device->handle; |
| sprintf(acpi_device_name(device), "%s", |
| ACPI_FUJITSU_HOTKEY_DEVICE_NAME); |
| sprintf(acpi_device_class(device), "%s", ACPI_FUJITSU_CLASS); |
| device->driver_data = fujitsu_hotkey; |
| |
| /* kfifo */ |
| spin_lock_init(&fujitsu_hotkey->fifo_lock); |
| error = kfifo_alloc(&fujitsu_hotkey->fifo, RINGBUFFERSIZE * sizeof(int), |
| GFP_KERNEL); |
| if (error) { |
| pr_err("kfifo_alloc failed\n"); |
| goto err_stop; |
| } |
| |
| fujitsu_hotkey->input = input = input_allocate_device(); |
| if (!input) { |
| error = -ENOMEM; |
| goto err_free_fifo; |
| } |
| |
| snprintf(fujitsu_hotkey->phys, sizeof(fujitsu_hotkey->phys), |
| "%s/video/input0", acpi_device_hid(device)); |
| |
| input->name = acpi_device_name(device); |
| input->phys = fujitsu_hotkey->phys; |
| input->id.bustype = BUS_HOST; |
| input->id.product = 0x06; |
| input->dev.parent = &device->dev; |
| |
| set_bit(EV_KEY, input->evbit); |
| set_bit(fujitsu->keycode1, input->keybit); |
| set_bit(fujitsu->keycode2, input->keybit); |
| set_bit(fujitsu->keycode3, input->keybit); |
| set_bit(fujitsu->keycode4, input->keybit); |
| set_bit(KEY_UNKNOWN, input->keybit); |
| |
| error = input_register_device(input); |
| if (error) |
| goto err_free_input_dev; |
| |
| error = acpi_bus_update_power(fujitsu_hotkey->acpi_handle, &state); |
| if (error) { |
| pr_err("Error reading power state\n"); |
| goto err_unregister_input_dev; |
| } |
| |
| pr_info("ACPI: %s [%s] (%s)\n", |
| acpi_device_name(device), acpi_device_bid(device), |
| !device->power.state ? "on" : "off"); |
| |
| fujitsu_hotkey->dev = device; |
| |
| if (acpi_has_method(device->handle, METHOD_NAME__INI)) { |
| vdbg_printk(FUJLAPTOP_DBG_INFO, "Invoking _INI\n"); |
| if (ACPI_FAILURE |
| (acpi_evaluate_object |
| (device->handle, METHOD_NAME__INI, NULL, NULL))) |
| pr_err("_INI Method failed\n"); |
| } |
| |
| i = 0; |
| while (call_fext_func(FUNC_BUTTONS, 0x1, 0x0, 0x0) != 0 |
| && (i++) < MAX_HOTKEY_RINGBUFFER_SIZE) |
| ; /* No action, result is discarded */ |
| vdbg_printk(FUJLAPTOP_DBG_INFO, "Discarded %i ringbuffer entries\n", i); |
| |
| fujitsu_hotkey->rfkill_supported = |
| call_fext_func(FUNC_RFKILL, 0x0, 0x0, 0x0); |
| |
| /* Make sure our bitmask of supported functions is cleared if the |
| RFKILL function block is not implemented, like on the S7020. */ |
| if (fujitsu_hotkey->rfkill_supported == UNSUPPORTED_CMD) |
| fujitsu_hotkey->rfkill_supported = 0; |
| |
| if (fujitsu_hotkey->rfkill_supported) |
| fujitsu_hotkey->rfkill_state = |
| call_fext_func(FUNC_RFKILL, 0x4, 0x0, 0x0); |
| |
| /* Suspect this is a keymap of the application panel, print it */ |
| pr_info("BTNI: [0x%x]\n", call_fext_func(FUNC_BUTTONS, 0x0, 0x0, 0x0)); |
| |
| #if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE) |
| if (call_fext_func(FUNC_LEDS, 0x0, 0x0, 0x0) & LOGOLAMP_POWERON) { |
| result = led_classdev_register(&fujitsu->pf_device->dev, |
| &logolamp_led); |
| if (result == 0) { |
| fujitsu_hotkey->logolamp_registered = 1; |
| } else { |
| pr_err("Could not register LED handler for logo lamp, error %i\n", |
| result); |
| } |
| } |
| |
| if ((call_fext_func(FUNC_LEDS, 0x0, 0x0, 0x0) & KEYBOARD_LAMPS) && |
| (call_fext_func(FUNC_BUTTONS, 0x0, 0x0, 0x0) == 0x0)) { |
| result = led_classdev_register(&fujitsu->pf_device->dev, |
| &kblamps_led); |
| if (result == 0) { |
| fujitsu_hotkey->kblamps_registered = 1; |
| } else { |
| pr_err("Could not register LED handler for keyboard lamps, error %i\n", |
| result); |
| } |
| } |
| #endif |
| |
| return result; |
| |
| err_unregister_input_dev: |
| input_unregister_device(input); |
| input = NULL; |
| err_free_input_dev: |
| input_free_device(input); |
| err_free_fifo: |
| kfifo_free(&fujitsu_hotkey->fifo); |
| err_stop: |
| return error; |
| } |
| |
| static int acpi_fujitsu_hotkey_remove(struct acpi_device *device) |
| { |
| struct fujitsu_hotkey_t *fujitsu_hotkey = acpi_driver_data(device); |
| struct input_dev *input = fujitsu_hotkey->input; |
| |
| #if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE) |
| if (fujitsu_hotkey->logolamp_registered) |
| led_classdev_unregister(&logolamp_led); |
| |
| if (fujitsu_hotkey->kblamps_registered) |
| led_classdev_unregister(&kblamps_led); |
| #endif |
| |
| input_unregister_device(input); |
| |
| kfifo_free(&fujitsu_hotkey->fifo); |
| |
| fujitsu_hotkey->acpi_handle = NULL; |
| |
| return 0; |
| } |
| |
| static void acpi_fujitsu_hotkey_notify(struct acpi_device *device, u32 event) |
| { |
| struct input_dev *input; |
| int keycode, keycode_r; |
| unsigned int irb = 1; |
| int i, status; |
| |
| input = fujitsu_hotkey->input; |
| |
| if (fujitsu_hotkey->rfkill_supported) |
| fujitsu_hotkey->rfkill_state = |
| call_fext_func(FUNC_RFKILL, 0x4, 0x0, 0x0); |
| |
| switch (event) { |
| case ACPI_FUJITSU_NOTIFY_CODE1: |
| i = 0; |
| while ((irb = |
| call_fext_func(FUNC_BUTTONS, 0x1, 0x0, 0x0)) != 0 |
| && (i++) < MAX_HOTKEY_RINGBUFFER_SIZE) { |
| switch (irb & 0x4ff) { |
| case KEY1_CODE: |
| keycode = fujitsu->keycode1; |
| break; |
| case KEY2_CODE: |
| keycode = fujitsu->keycode2; |
| break; |
| case KEY3_CODE: |
| keycode = fujitsu->keycode3; |
| break; |
| case KEY4_CODE: |
| keycode = fujitsu->keycode4; |
| break; |
| case 0: |
| keycode = 0; |
| break; |
| default: |
| vdbg_printk(FUJLAPTOP_DBG_WARN, |
| "Unknown GIRB result [%x]\n", irb); |
| keycode = -1; |
| break; |
| } |
| if (keycode > 0) { |
| vdbg_printk(FUJLAPTOP_DBG_TRACE, |
| "Push keycode into ringbuffer [%d]\n", |
| keycode); |
| status = kfifo_in_locked(&fujitsu_hotkey->fifo, |
| (unsigned char *)&keycode, |
| sizeof(keycode), |
| &fujitsu_hotkey->fifo_lock); |
| if (status != sizeof(keycode)) { |
| vdbg_printk(FUJLAPTOP_DBG_WARN, |
| "Could not push keycode [0x%x]\n", |
| keycode); |
| } else { |
| input_report_key(input, keycode, 1); |
| input_sync(input); |
| } |
| } else if (keycode == 0) { |
| while ((status = |
| kfifo_out_locked( |
| &fujitsu_hotkey->fifo, |
| (unsigned char *) &keycode_r, |
| sizeof(keycode_r), |
| &fujitsu_hotkey->fifo_lock)) |
| == sizeof(keycode_r)) { |
| input_report_key(input, keycode_r, 0); |
| input_sync(input); |
| vdbg_printk(FUJLAPTOP_DBG_TRACE, |
| "Pop keycode from ringbuffer [%d]\n", |
| keycode_r); |
| } |
| } |
| } |
| |
| break; |
| default: |
| keycode = KEY_UNKNOWN; |
| vdbg_printk(FUJLAPTOP_DBG_WARN, |
| "Unsupported event [0x%x]\n", event); |
| input_report_key(input, keycode, 1); |
| input_sync(input); |
| input_report_key(input, keycode, 0); |
| input_sync(input); |
| break; |
| } |
| } |
| |
| /* Initialization */ |
| |
| static const struct acpi_device_id fujitsu_device_ids[] = { |
| {ACPI_FUJITSU_HID, 0}, |
| {"", 0}, |
| }; |
| |
| static struct acpi_driver acpi_fujitsu_driver = { |
| .name = ACPI_FUJITSU_DRIVER_NAME, |
| .class = ACPI_FUJITSU_CLASS, |
| .ids = fujitsu_device_ids, |
| .ops = { |
| .add = acpi_fujitsu_add, |
| .remove = acpi_fujitsu_remove, |
| .notify = acpi_fujitsu_notify, |
| }, |
| }; |
| |
| static const struct acpi_device_id fujitsu_hotkey_device_ids[] = { |
| {ACPI_FUJITSU_HOTKEY_HID, 0}, |
| {"", 0}, |
| }; |
| |
| static struct acpi_driver acpi_fujitsu_hotkey_driver = { |
| .name = ACPI_FUJITSU_HOTKEY_DRIVER_NAME, |
| .class = ACPI_FUJITSU_CLASS, |
| .ids = fujitsu_hotkey_device_ids, |
| .ops = { |
| .add = acpi_fujitsu_hotkey_add, |
| .remove = acpi_fujitsu_hotkey_remove, |
| .notify = acpi_fujitsu_hotkey_notify, |
| }, |
| }; |
| |
| static const struct acpi_device_id fujitsu_ids[] __used = { |
| {ACPI_FUJITSU_HID, 0}, |
| {ACPI_FUJITSU_HOTKEY_HID, 0}, |
| {"", 0} |
| }; |
| MODULE_DEVICE_TABLE(acpi, fujitsu_ids); |
| |
| static int __init fujitsu_init(void) |
| { |
| int ret, result, max_brightness; |
| |
| if (acpi_disabled) |
| return -ENODEV; |
| |
| fujitsu = kzalloc(sizeof(struct fujitsu_t), GFP_KERNEL); |
| if (!fujitsu) |
| return -ENOMEM; |
| fujitsu->keycode1 = KEY_PROG1; |
| fujitsu->keycode2 = KEY_PROG2; |
| fujitsu->keycode3 = KEY_PROG3; |
| fujitsu->keycode4 = KEY_PROG4; |
| dmi_check_system(fujitsu_dmi_table); |
| |
| result = acpi_bus_register_driver(&acpi_fujitsu_driver); |
| if (result < 0) { |
| ret = -ENODEV; |
| goto fail_acpi; |
| } |
| |
| /* Register platform stuff */ |
| |
| fujitsu->pf_device = platform_device_alloc("fujitsu-laptop", -1); |
| if (!fujitsu->pf_device) { |
| ret = -ENOMEM; |
| goto fail_platform_driver; |
| } |
| |
| ret = platform_device_add(fujitsu->pf_device); |
| if (ret) |
| goto fail_platform_device1; |
| |
| ret = |
| sysfs_create_group(&fujitsu->pf_device->dev.kobj, |
| &fujitsupf_attribute_group); |
| if (ret) |
| goto fail_platform_device2; |
| |
| /* Register backlight stuff */ |
| |
| if (!acpi_video_backlight_support()) { |
| struct backlight_properties props; |
| |
| memset(&props, 0, sizeof(struct backlight_properties)); |
| max_brightness = fujitsu->max_brightness; |
| props.type = BACKLIGHT_PLATFORM; |
| props.max_brightness = max_brightness - 1; |
| fujitsu->bl_device = backlight_device_register("fujitsu-laptop", |
| NULL, NULL, |
| &fujitsubl_ops, |
| &props); |
| if (IS_ERR(fujitsu->bl_device)) { |
| ret = PTR_ERR(fujitsu->bl_device); |
| fujitsu->bl_device = NULL; |
| goto fail_sysfs_group; |
| } |
| fujitsu->bl_device->props.brightness = fujitsu->brightness_level; |
| } |
| |
| ret = platform_driver_register(&fujitsupf_driver); |
| if (ret) |
| goto fail_backlight; |
| |
| /* Register hotkey driver */ |
| |
| fujitsu_hotkey = kzalloc(sizeof(struct fujitsu_hotkey_t), GFP_KERNEL); |
| if (!fujitsu_hotkey) { |
| ret = -ENOMEM; |
| goto fail_hotkey; |
| } |
| |
| result = acpi_bus_register_driver(&acpi_fujitsu_hotkey_driver); |
| if (result < 0) { |
| ret = -ENODEV; |
| goto fail_hotkey1; |
| } |
| |
| /* Sync backlight power status (needs FUJ02E3 device, hence deferred) */ |
| |
| if (!acpi_video_backlight_support()) { |
| if (call_fext_func(FUNC_BACKLIGHT, 0x2, 0x4, 0x0) == 3) |
| fujitsu->bl_device->props.power = FB_BLANK_POWERDOWN; |
| else |
| fujitsu->bl_device->props.power = FB_BLANK_UNBLANK; |
| } |
| |
| pr_info("driver " FUJITSU_DRIVER_VERSION " successfully loaded\n"); |
| |
| return 0; |
| |
| fail_hotkey1: |
| kfree(fujitsu_hotkey); |
| fail_hotkey: |
| platform_driver_unregister(&fujitsupf_driver); |
| fail_backlight: |
| backlight_device_unregister(fujitsu->bl_device); |
| fail_sysfs_group: |
| sysfs_remove_group(&fujitsu->pf_device->dev.kobj, |
| &fujitsupf_attribute_group); |
| fail_platform_device2: |
| platform_device_del(fujitsu->pf_device); |
| fail_platform_device1: |
| platform_device_put(fujitsu->pf_device); |
| fail_platform_driver: |
| acpi_bus_unregister_driver(&acpi_fujitsu_driver); |
| fail_acpi: |
| kfree(fujitsu); |
| |
| return ret; |
| } |
| |
| static void __exit fujitsu_cleanup(void) |
| { |
| acpi_bus_unregister_driver(&acpi_fujitsu_hotkey_driver); |
| |
| kfree(fujitsu_hotkey); |
| |
| platform_driver_unregister(&fujitsupf_driver); |
| |
| backlight_device_unregister(fujitsu->bl_device); |
| |
| sysfs_remove_group(&fujitsu->pf_device->dev.kobj, |
| &fujitsupf_attribute_group); |
| |
| platform_device_unregister(fujitsu->pf_device); |
| |
| acpi_bus_unregister_driver(&acpi_fujitsu_driver); |
| |
| kfree(fujitsu); |
| |
| pr_info("driver unloaded\n"); |
| } |
| |
| module_init(fujitsu_init); |
| module_exit(fujitsu_cleanup); |
| |
| module_param(use_alt_lcd_levels, uint, 0644); |
| MODULE_PARM_DESC(use_alt_lcd_levels, |
| "Use alternative interface for lcd_levels (needed for Lifebook s6410)."); |
| module_param(disable_brightness_adjust, uint, 0644); |
| MODULE_PARM_DESC(disable_brightness_adjust, "Disable brightness adjustment ."); |
| #ifdef CONFIG_FUJITSU_LAPTOP_DEBUG |
| module_param_named(debug, dbg_level, uint, 0644); |
| MODULE_PARM_DESC(debug, "Sets debug level bit-mask"); |
| #endif |
| |
| MODULE_AUTHOR("Jonathan Woithe, Peter Gruber, Tony Vroon"); |
| MODULE_DESCRIPTION("Fujitsu laptop extras support"); |
| MODULE_VERSION(FUJITSU_DRIVER_VERSION); |
| MODULE_LICENSE("GPL"); |
| |
| MODULE_ALIAS("dmi:*:svnFUJITSUSIEMENS:*:pvr:rvnFUJITSU:rnFJNB1D3:*:cvrS6410:*"); |
| MODULE_ALIAS("dmi:*:svnFUJITSUSIEMENS:*:pvr:rvnFUJITSU:rnFJNB1E6:*:cvrS6420:*"); |
| MODULE_ALIAS("dmi:*:svnFUJITSU:*:pvr:rvnFUJITSU:rnFJNB19C:*:cvrS7020:*"); |