| / { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "brcm,bcm7429"; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| mips-hpt-frequency = <163125000>; |
| |
| cpu@0 { |
| compatible = "brcm,bmips5000"; |
| device_type = "cpu"; |
| reg = <0>; |
| }; |
| |
| cpu@1 { |
| compatible = "brcm,bmips5000"; |
| device_type = "cpu"; |
| reg = <1>; |
| }; |
| }; |
| |
| aliases { |
| uart0 = &uart0; |
| sdhci0 = &sdhci0; |
| sdhci1 = &sdhci1; |
| brcm_pmx_core = &brcm_pmx_core; |
| }; |
| |
| cpu_intc: cpu_intc { |
| #address-cells = <0>; |
| compatible = "mti,cpu-interrupt-controller"; |
| |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| }; |
| |
| clocks { |
| uart_clk: uart_clk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <81000000>; |
| }; |
| }; |
| |
| rdb { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| compatible = "simple-bus"; |
| ranges = <0 0x10000000 0x01000000>; |
| |
| periph_intc: periph_intc@411400 { |
| compatible = "brcm,bcm7038-l1-intc"; |
| reg = <0x411400 0x30>, <0x411600 0x30>; |
| |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| |
| interrupt-parent = <&cpu_intc>; |
| interrupts = <2>, <3>; |
| }; |
| |
| sun_l2_intc: sun_l2_intc@403000 { |
| compatible = "brcm,l2-intc"; |
| reg = <0x403000 0x30>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <38>; |
| }; |
| |
| aon_pm_l2_intc: interrupt-controller@408440 { |
| #interrupt-cells = <1>; |
| compatible = "brcm,l2-intc"; |
| interrupt-parent = <&periph_intc>; |
| reg = <0x408440 0x30>; |
| interrupt-controller; |
| interrupts = <0x28>; |
| interrupt-names = "sys_pm"; |
| brcm,irq-can-wake; |
| }; |
| |
| gisb-arb@400000 { |
| compatible = "brcm,bcm7400-gisb-arb"; |
| reg = <0x400000 0xdc>; |
| native-endian; |
| interrupt-parent = <&sun_l2_intc>; |
| interrupts = <0>, <2>; |
| brcm,gisb-arb-master-mask = <0x177b>; |
| brcm,gisb-arb-master-names = "ssp_0", "cpu_0", |
| "bsp_0", "rdc_0", |
| "raaga_0", "jtag_0", |
| "svd_0"; |
| }; |
| |
| upg_irq0_intc: interrupt-controller@406680 { |
| #interrupt-cells = <1>; |
| compatible = "brcm,bcm7120-l2-intc"; |
| interrupt-parent = <&periph_intc>; |
| reg = <0x406680 0x8>; |
| interrupt-controller; |
| interrupts = <0x2d>, |
| <0x2b>; |
| interrupt-names = "upg_main", |
| "upg_bsc"; |
| brcm,int-map-mask = <0x25c>, |
| <0x18000000>; |
| brcm,int-fwd-mask = <0x70000>; |
| }; |
| |
| irq0_aon_intc: interrupt-controller@409600 { |
| #interrupt-cells = <1>; |
| compatible = "brcm,bcm7120-l2-intc"; |
| interrupt-parent = <&periph_intc>; |
| reg = <0x409600 0x8>; |
| interrupt-controller; |
| interrupts = <0x2e>, |
| <0x2c>, |
| <0x31>; |
| interrupt-names = "upg_main_aon", |
| "upg_bsc_aon", |
| "upg_spi"; |
| brcm,int-map-mask = <0x1e3>, |
| <0x7000000>, |
| <0x100000>; |
| brcm,int-fwd-mask = <0x0>; |
| brcm,irq-can-wake; |
| }; |
| |
| hif_intr2_intc: interrupt-controller@411000 { |
| #interrupt-cells = <1>; |
| compatible = "brcm,l2-intc"; |
| interrupt-parent = <&periph_intc>; |
| reg = <0x411000 0x30>; |
| interrupt-controller; |
| interrupts = <0x16>; |
| interrupt-names = "hif"; |
| }; |
| |
| nand: nand@412800 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "brcm,brcmnand-v6.0", |
| "brcm,brcmnand"; |
| reg-names = "nand"; |
| status = "disabled"; |
| reg = <0x412800 0x600>; |
| interrupts = <0x18>; |
| interrupt-parent = <&hif_intr2_intc>; |
| interrupt-names = "nand_ctlrdy"; |
| }; |
| |
| sun_top_ctrl: syscon@404000 { |
| compatible = "brcm,bcm7429-sun-top-ctrl", "syscon"; |
| reg = <0x404000 0x51c>; |
| little-endian; |
| }; |
| |
| reboot { |
| compatible = "brcm,brcmstb-reboot"; |
| syscon = <&sun_top_ctrl 0x304 0x308>; |
| }; |
| |
| uart0: serial@406700 { |
| compatible = "ns16550a"; |
| reg = <0x406700 0x20>; |
| reg-io-width = <0x4>; |
| reg-shift = <0x2>; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <51>; |
| clocks = <&uart_clk>; |
| status = "disabled"; |
| }; |
| |
| enet0: ethernet@700000 { |
| phy-mode = "internal"; |
| phy-handle = <&phy1>; |
| mac-address = [ 00 10 18 36 23 1a ]; |
| compatible = "brcm,genet-v3"; |
| #address-cells = <0x1>; |
| #size-cells = <0x1>; |
| reg = <0x700000 0x11c88>; |
| interrupts = <15>, <16>; |
| interrupt-parent = <&periph_intc>; |
| status = "disabled"; |
| |
| mdio@e14 { |
| compatible = "brcm,genet-mdio-v3"; |
| #address-cells = <0x1>; |
| #size-cells = <0x0>; |
| reg = <0xe14 0x8>; |
| |
| phy1: ethernet-phy@1 { |
| max-speed = <100>; |
| reg = <0x1>; |
| compatible = "brcm,40nm-ephy", |
| "ethernet-phy-ieee802.3-c22"; |
| }; |
| }; |
| }; |
| |
| enet1: ethernet@720000 { |
| phy-mode = "moca"; |
| fixed-link = <1 1 1000 0 0>; |
| mac-address = [ 00 10 18 36 23 1b ]; |
| compatible = "brcm,genet-v3"; |
| #address-cells = <0x1>; |
| #size-cells = <0x1>; |
| reg = <0x720000 0x11c88>; |
| interrupts = <17>, <18>; |
| interrupt-parent = <&periph_intc>; |
| status = "disabled"; |
| |
| mdio@e14 { |
| compatible = "brcm,genet-mdio-v3"; |
| #address-cells = <0x1>; |
| #size-cells = <0x0>; |
| reg = <0xe14 0x8>; |
| |
| }; |
| }; |
| |
| |
| ehci0: usb@480300 { |
| compatible = "brcm,bcm7429-ehci", "generic-ehci"; |
| reg = <0x480300 0x100>; |
| native-endian; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <55>; |
| status = "disabled"; |
| }; |
| |
| ohci0: usb@480400 { |
| compatible = "brcm,bcm7429-ohci", "generic-ohci"; |
| reg = <0x480400 0x100>; |
| native-endian; |
| no-big-frame-no; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <57>; |
| status = "disabled"; |
| }; |
| |
| ehci1: usb@480500 { |
| compatible = "brcm,bcm7429-ehci", "generic-ehci"; |
| reg = <0x480500 0x100>; |
| native-endian; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <56>; |
| status = "disabled"; |
| }; |
| |
| ohci1: usb@480600 { |
| compatible = "brcm,bcm7429-ohci", "generic-ohci"; |
| reg = <0x480600 0x100>; |
| native-endian; |
| no-big-frame-no; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <58>; |
| status = "disabled"; |
| }; |
| |
| ehci2: usb@490300 { |
| compatible = "brcm,bcm7429-ehci", "generic-ehci"; |
| reg = <0x490300 0x100>; |
| native-endian; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <60>; |
| status = "disabled"; |
| }; |
| |
| ohci2: usb@490400 { |
| compatible = "brcm,bcm7429-ohci", "generic-ohci"; |
| reg = <0x490400 0x100>; |
| native-endian; |
| no-big-frame-no; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <62>; |
| status = "disabled"; |
| }; |
| |
| ehci3: usb@490500 { |
| compatible = "brcm,bcm7429-ehci", "generic-ehci"; |
| reg = <0x490500 0x100>; |
| native-endian; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <61>; |
| status = "disabled"; |
| }; |
| |
| ohci3: usb@490600 { |
| compatible = "brcm,bcm7429-ohci", "generic-ohci"; |
| reg = <0x490600 0x100>; |
| native-endian; |
| no-big-frame-no; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <63>; |
| status = "disabled"; |
| }; |
| |
| upg_gio: gpio@406500 { |
| #gpio-cells = <2>; |
| #interrupt-cells = <2>; |
| compatible = "brcm,bcm7429-gpio", |
| "brcm,brcmstb-gpio"; |
| gpio-controller; |
| interrupt-controller; |
| reg = <0x406500 0xa0>; |
| interrupts = <0x6>; |
| interrupt-parent = <&upg_irq0_intc>; |
| interrupt-names = "upg_gio"; |
| brcm,gpio-bank-widths = <32 32 32 32 |
| 26>; |
| }; |
| |
| upg_gio_aon: gpio@409800 { |
| #gpio-cells = <2>; |
| #interrupt-cells = <2>; |
| compatible = "brcm,bcm7429-gpio", |
| "brcm,brcmstb-gpio"; |
| gpio-controller; |
| interrupt-controller; |
| reg = <0x409800 0x60>; |
| interrupts = <0x6>; |
| interrupt-parent = <&irq0_aon_intc>; |
| interrupts-extended = <&irq0_aon_intc 0x6>, |
| <&aon_pm_l2_intc 0x5>; |
| interrupt-names = "upg_gio_aon", |
| "upg_gio_aon_wakeup"; |
| wakeup-source; |
| brcm,gpio-bank-widths = <21 6>; |
| }; |
| |
| sata: sata@181000 { |
| compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci"; |
| reg-names = "ahci", "top-ctrl"; |
| reg = <0x181000 0xa9c>, <0x180020 0x1c>; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <32>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| |
| sata0: sata-port@0 { |
| reg = <0>; |
| phys = <&sata_phy0>; |
| }; |
| |
| sata1: sata-port@1 { |
| reg = <1>; |
| phys = <&sata_phy1>; |
| }; |
| }; |
| |
| sata_phy: sata-phy@1800000 { |
| compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3"; |
| reg = <0x180100 0x0eff>; |
| reg-names = "phy"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| |
| sata_phy0: sata-phy@0 { |
| reg = <0>; |
| #phy-cells = <0>; |
| }; |
| |
| sata_phy1: sata-phy@1 { |
| reg = <1>; |
| #phy-cells = <0>; |
| }; |
| }; |
| |
| moca: bmoca@a00000 { |
| chip-id = <0x742900b0>; |
| mac-address = [ 00 00 00 00 00 00 ]; |
| enet-id = <&enet1>; |
| rf-band = "highrf"; |
| compatible = "brcm,bmoca-instance"; |
| hw-rev = <0x2002>; |
| reg = <0xa00000 0x1ffd94>; |
| interrupts = <27>; |
| interrupt-parent = <&periph_intc>; |
| interrupt-names = "moca"; |
| i2c-base = <0x10406200>; |
| i2c-addr = <0x70>; |
| status = "disabled"; |
| }; |
| sdhci0: sdhci@413500 { |
| compatible = "brcm,sdhci-brcmstb"; |
| reg = <0x413500 0x100 0x413600 0x100>; |
| reg-names = "host", "cfg"; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <34>; |
| broken-64-bit-dma; |
| sdhci,auto-cmd12; |
| no-1-8-v; |
| status = "disabled"; |
| }; |
| sdhci1: sdhci@413700 { |
| compatible = "brcm,sdhci-brcmstb"; |
| reg = <0x413700 0x100 0x413800 0x100>; |
| reg-names = "host", "cfg"; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <35>; |
| non-removable; |
| bus-width = <0x8>; |
| broken-64-bit-dma; |
| broken-timeout-value; |
| sdhci,auto-cmd12; |
| no-1-8-v; |
| status = "disabled"; |
| }; |
| brcm_pmx_core: pinmux@404100 { |
| compatible = "brcm,7429-padconf", "pinctrl-single"; |
| reg = <0x404100 0x00000074>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-single,bit-per-mux; |
| pinctrl-single,register-width = <32>; |
| pinctrl-single,function-mask = <0x3>; |
| status = "disabled"; |
| }; |
| brcm_pmx_hif_emmc_pinctrl: pinmux@412428 { |
| compatible = "brcm,7429-padconf", "pinctrl-single"; |
| reg = <0x412428 0x00000100>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-single,bit-per-mux; |
| pinctrl-single,register-width = <32>; |
| pinctrl-single,function-mask = <0xffffffff>; |
| status = "disabled"; |
| }; |
| }; |
| }; |