arch/arm/boot/dts/omap3-n900.dts - kernel/lockdown - Git at Google

 /*
  * Copyright (C) 2013 Pavel Machek <pavel@ucw.cz>
  * Copyright (C) 2013-2014 Aaro Koskinen <aaro.koskinen@iki.fi>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 (or later) as
  * published by the Free Software Foundation.
  */

 /dts-v1/;

 #include "omap34xx-hs.dtsi"

 / {
 	model = "Nokia N900";
 	compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3";

 	cpus {
 		cpu@0 {
 			cpu0-supply = <&vcc>;
 		};
 	};

 	memory {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};

 	gpio_keys {
 		compatible = "gpio-keys";

 		camera_lens_cover {
 			label = "Camera Lens Cover";
 			gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */
 			linux,input-type = <5>; /* EV_SW */
 			linux,code = <0x09>; /* SW_CAMERA_LENS_COVER */
 			gpio-key,wakeup;
 		};

 		camera_focus {
 			label = "Camera Focus";
 			gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */
 			linux,code = <0x210>; /* KEY_CAMERA_FOCUS */
 			gpio-key,wakeup;
 		};

 		camera_capture {
 			label = "Camera Capture";
 			gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */
 			linux,code = <0xd4>; /* KEY_CAMERA */
 			gpio-key,wakeup;
 		};

 		lock_button {
 			label = "Lock Button";
 			gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */
 			linux,code = <0x98>; /* KEY_SCREENLOCK */
 			gpio-key,wakeup;
 		};

 		keypad_slide {
 			label = "Keypad Slide";
 			gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */
 			linux,input-type = <5>; /* EV_SW */
 			linux,code = <0x0a>; /* SW_KEYPAD_SLIDE */
 			gpio-key,wakeup;
 		};

 		proximity_sensor {
 			label = "Proximity Sensor";
 			gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */
 			linux,input-type = <5>; /* EV_SW */
 			linux,code = <0x0b>; /* SW_FRONT_PROXIMITY */
 		};
 	};

 };

 &omap3_pmx_core {
 	pinctrl-names = "default";

 	uart2_pins: pinmux_uart2_pins {
 		pinctrl-single,pins = <
 			0x14a (PIN_INPUT | MUX_MODE0)		/* uart2_rx */
 			0x148 (PIN_OUTPUT | MUX_MODE0)		/* uart2_tx */
 		>;
 	};

 	uart3_pins: pinmux_uart3_pins {
 		pinctrl-single,pins = <
 			0x16e (PIN_INPUT | MUX_MODE0)		/* uart3_rx */
 			0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx */
 		>;
 	};

 	i2c1_pins: pinmux_i2c1_pins {
 		pinctrl-single,pins = <
 			0x18a (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
 			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
 		>;
 	};

 	i2c2_pins: pinmux_i2c2_pins {
 		pinctrl-single,pins = <
 			0x18e (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
 			0x190 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
 		>;
 	};

 	i2c3_pins: pinmux_i2c3_pins {
 		pinctrl-single,pins = <
 			0x192 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
 			0x194 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
 		>;
 	};

 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
 			0x114 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk */
 			0x116 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd */
 			0x118 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0 */
 			0x11a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1 */
 			0x11c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2 */
 			0x11e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3 */
 		>;
 	};

 	mmc2_pins: pinmux_mmc2_pins {
 		pinctrl-single,pins = <
 			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk */
 			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd */
 			0x12c (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc2_dat0 */
 			0x12e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1 */
 			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2 */
 			0x132 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3 */
 			0x134 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat4 */
 			0x136 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat5 */
 			0x138 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat6 */
 			0x13a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat7 */
 		>;
 	};

 	display_pins: pinmux_display_pins {
 		pinctrl-single,pins = <
 			0x0d4 (PIN_OUTPUT | MUX_MODE4)		/* RX51_LCD_RESET_GPIO */
 		>;
 	};
 };

 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins>;

 	clock-frequency = <2200000>;

 	twl: twl@48 {
 		reg = <0x48>;
 		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
 		interrupt-parent = <&intc>;
 	};
 };

 #include "twl4030.dtsi"
 #include "twl4030_omap3.dtsi"

 &vaux1 {
 	regulator-name = "V28";
 	regulator-min-microvolt = <2800000>;
 	regulator-max-microvolt = <2800000>;
 	regulator-always-on; /* due battery cover sensor */
 };

 &vaux2 {
 	regulator-name = "VCSI";
 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <1800000>;
 };

 &vaux3 {
 	regulator-name = "VMMC2_30";
 	regulator-min-microvolt = <2800000>;
 	regulator-max-microvolt = <3000000>;
 };

 &vaux4 {
 	regulator-name = "VCAM_ANA_28";
 	regulator-min-microvolt = <2800000>;
 	regulator-max-microvolt = <2800000>;
 };

 &vmmc1 {
 	regulator-name = "VMMC1";
 	regulator-min-microvolt = <1850000>;
 	regulator-max-microvolt = <3150000>;
 };

 &vmmc2 {
 	regulator-name = "V28_A";
 	regulator-min-microvolt = <2800000>;
 	regulator-max-microvolt = <3000000>;
 	regulator-always-on; /* due VIO leak to AIC34 VDDs */
 };

 &vpll1 {
 	regulator-name = "VPLL";
 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <1800000>;
 	regulator-always-on;
 };

 &vpll2 {
 	regulator-name = "VSDI_CSI";
 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <1800000>;
 	regulator-always-on;
 };

 &vsim {
 	regulator-name = "VMMC2_IO_18";
 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <1800000>;
 };

 &vio {
 	regulator-name = "VIO";
 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <1800000>;

 };

 &vintana1 {
 	regulator-name = "VINTANA1";
 	/* fixed to 1500000 */
 	regulator-always-on;
 };

 &vintana2 {
 	regulator-name = "VINTANA2";
 	regulator-min-microvolt = <2750000>;
 	regulator-max-microvolt = <2750000>;
 	regulator-always-on;
 };

 &vintdig {
 	regulator-name = "VINTDIG";
 	/* fixed to 1500000 */
 	regulator-always-on;
 };

 &twl {
 	twl_audio: audio {
 		compatible = "ti,twl4030-audio";
 		ti,enable-vibra = <1>;
 	};
 };

 &twl_gpio {
 	ti,pullups	= <0x0>;
 	ti,pulldowns	= <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */
 };

 &i2c2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins>;

 	clock-frequency = <100000>;

 	tlv320aic3x: tlv320aic3x@18 {
 		compatible = "ti,tlv320aic3x";
 		reg = <0x18>;
 		gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
 		ai3x-gpio-func = <
 			0 /* AIC3X_GPIO1_FUNC_DISABLED */
 			5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
 		>;

 		AVDD-supply = <&vmmc2>;
 		DRVDD-supply = <&vmmc2>;
 		IOVDD-supply = <&vio>;
 		DVDD-supply = <&vio>;
 	};

 	tlv320aic3x_aux: tlv320aic3x@19 {
 		compatible = "ti,tlv320aic3x";
 		reg = <0x19>;
 		gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */

 		AVDD-supply = <&vmmc2>;
 		DRVDD-supply = <&vmmc2>;
 		IOVDD-supply = <&vio>;
 		DVDD-supply = <&vio>;
 	};

 	lp5523: lp5523@32 {
 		compatible = "national,lp5523";
 		reg = <0x32>;
 		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
 		enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */

 		chan0 {
 			chan-name = "lp5523:kb1";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
 		};

 		chan1 {
 			chan-name = "lp5523:kb2";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
 		};

 		chan2 {
 			chan-name = "lp5523:kb3";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
 		};

 		chan3 {
 			chan-name = "lp5523:kb4";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
 		};

 		chan4 {
 			chan-name = "lp5523:b";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
 		};

 		chan5 {
 			chan-name = "lp5523:g";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
 		};

 		chan6 {
 			chan-name = "lp5523:r";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
 		};

 		chan7 {
 			chan-name = "lp5523:kb5";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
 		};

 		chan8 {
 			chan-name = "lp5523:kb6";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
 		};
 	};

 	bq27200: bq27200@55 {
 		compatible = "ti,bq27200";
 		reg = <0x55>;
 	};
 };

 &i2c3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c3_pins>;

 	clock-frequency = <400000>;
 };

 &mmc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
 	vmmc-supply = <&vmmc1>;
 	bus-width = <4>;
 	cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
 };

 /* most boards use vaux3, only some old versions use vmmc2 instead */
 &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins>;
 	vmmc-supply = <&vaux3>;
 	vmmc_aux-supply = <&vsim>;
 	bus-width = <8>;
 	non-removable;
 };

 &mmc3 {
 	status = "disabled";
 };

 &gpmc {
 	ranges = <0 0 0x04000000 0x10000000>; /* 256MB */

 	/* gpio-irq for dma: 65 */

 	onenand@0,0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <0 0 0x10000000>;

 		gpmc,sync-read;
 		gpmc,sync-write;
 		gpmc,burst-length = <16>;
 		gpmc,burst-read;
 		gpmc,burst-wrap;
 		gpmc,burst-write;
 		gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */
 		gpmc,mux-add-data = <2>; /* GPMC_MUX_AD */
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <87>;
 		gpmc,cs-wr-off-ns = <87>;
 		gpmc,adv-on-ns = <0>;
 		gpmc,adv-rd-off-ns = <10>;
 		gpmc,adv-wr-off-ns = <10>;
 		gpmc,oe-on-ns = <15>;
 		gpmc,oe-off-ns = <87>;
 		gpmc,we-on-ns = <0>;
 		gpmc,we-off-ns = <87>;
 		gpmc,rd-cycle-ns = <112>;
 		gpmc,wr-cycle-ns = <112>;
 		gpmc,access-ns = <81>;
 		gpmc,page-burst-access-ns = <15>;
 		gpmc,bus-turnaround-ns = <0>;
 		gpmc,cycle2cycle-delay-ns = <0>;
 		gpmc,wait-monitoring-ns = <0>;
 		gpmc,clk-activation-ns = <5>;
 		gpmc,wr-data-mux-bus-ns = <30>;
 		gpmc,wr-access-ns = <81>;
 		gpmc,sync-clk-ps = <15000>;

 		/*
 		 * MTD partition table corresponding to Nokia's
 		 * Maemo 5 (Fremantle) release.
 		 */
 		partition@0 {
 			label = "bootloader";
 			reg = <0x00000000 0x00020000>;
 			read-only;
 		};
 		partition@1 {
 			label = "config";
 			reg = <0x00020000 0x00060000>;
 		};
 		partition@2 {
 			label = "log";
 			reg = <0x00080000 0x00040000>;
 		};
 		partition@3 {
 			label = "kernel";
 			reg = <0x000c0000 0x00200000>;
 		};
 		partition@4 {
 			label = "initfs";
 			reg = <0x002c0000 0x00200000>;
 		};
 		partition@5 {
 			label = "rootfs";
 			reg = <0x004c0000 0x0fb40000>;
 		};
 	};
 };

 &mcspi1 {
 	/*
 	 * For some reason, touchscreen is necessary for screen to work at
 	 * all on real hw. It works well without it on emulator.
 	 *
 	 * Also... order in the device tree actually matters here.
 	 */
 	tsc2005@0 {
 		compatible = "tsc2005";
 		spi-max-frequency = <6000000>;
 		reg = <0>;
 	};
 	mipid@2 {
 		compatible = "acx565akm";
 		spi-max-frequency = <6000000>;
 		reg = <2>;

 		pinctrl-names = "default";
 		pinctrl-0 = <&display_pins>;
 	};
 };

 &usb_otg_hs {
 	interface-type = <0>;
 	usb-phy = <&usb2_phy>;
 	phys = <&usb2_phy>;
 	phy-names = "usb2-phy";
 	mode = <2>;
 	power = <50>;
 };

 &uart1 {
 	status = "disabled";
 };

 &uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart2_pins>;
 };

 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart3_pins>;
 };
	/*
	* Copyright (C) 2013 Pavel Machek <pavel@ucw.cz>
	* Copyright (C) 2013-2014 Aaro Koskinen <aaro.koskinen@iki.fi>
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 (or later) as
	* published by the Free Software Foundation.
	*/

	/dts-v1/;

	#include "omap34xx-hs.dtsi"

	/ {
	model = "Nokia N900";
	compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3";

	cpus {
	cpu@0 {
	cpu0-supply = <&vcc>;
	};
	};

	memory {
	device_type = "memory";
	reg = <0x80000000 0x10000000>; /* 256 MB */
	};

	gpio_keys {
	compatible = "gpio-keys";

	camera_lens_cover {
	label = "Camera Lens Cover";
	gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */
	linux,input-type = <5>; /* EV_SW */
	linux,code = <0x09>; /* SW_CAMERA_LENS_COVER */
	gpio-key,wakeup;
	};

	camera_focus {
	label = "Camera Focus";
	gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */
	linux,code = <0x210>; /* KEY_CAMERA_FOCUS */
	gpio-key,wakeup;
	};

	camera_capture {
	label = "Camera Capture";
	gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */
	linux,code = <0xd4>; /* KEY_CAMERA */
	gpio-key,wakeup;
	};

	lock_button {
	label = "Lock Button";
	gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */
	linux,code = <0x98>; /* KEY_SCREENLOCK */
	gpio-key,wakeup;
	};

	keypad_slide {
	label = "Keypad Slide";
	gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */
	linux,input-type = <5>; /* EV_SW */
	linux,code = <0x0a>; /* SW_KEYPAD_SLIDE */
	gpio-key,wakeup;
	};

	proximity_sensor {
	label = "Proximity Sensor";
	gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */
	linux,input-type = <5>; /* EV_SW */
	linux,code = <0x0b>; /* SW_FRONT_PROXIMITY */
	};
	};

	};

	&omap3_pmx_core {
	pinctrl-names = "default";

	uart2_pins: pinmux_uart2_pins {
	pinctrl-single,pins = <
	0x14a (PIN_INPUT \| MUX_MODE0) /* uart2_rx */
	0x148 (PIN_OUTPUT \| MUX_MODE0) /* uart2_tx */
	>;
	};

	uart3_pins: pinmux_uart3_pins {
	pinctrl-single,pins = <
	0x16e (PIN_INPUT \| MUX_MODE0) /* uart3_rx */
	0x170 (PIN_OUTPUT \| MUX_MODE0) /* uart3_tx */
	>;
	};

	i2c1_pins: pinmux_i2c1_pins {
	pinctrl-single,pins = <
	0x18a (PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c1_scl */
	0x18c (PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c1_sda */
	>;
	};

	i2c2_pins: pinmux_i2c2_pins {
	pinctrl-single,pins = <
	0x18e (PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c2_scl */
	0x190 (PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c2_sda */
	>;
	};

	i2c3_pins: pinmux_i2c3_pins {
	pinctrl-single,pins = <
	0x192 (PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c3_scl */
	0x194 (PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c3_sda */
	>;
	};

	mmc1_pins: pinmux_mmc1_pins {
	pinctrl-single,pins = <
	0x114 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_clk */
	0x116 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_cmd */
	0x118 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_dat0 */
	0x11a (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_dat1 */
	0x11c (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_dat2 */
	0x11e (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_dat3 */
	>;
	};

	mmc2_pins: pinmux_mmc2_pins {
	pinctrl-single,pins = <
	0x128 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_clk */
	0x12a (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_cmd */
	0x12c (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat0 */
	0x12e (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat1 */
	0x130 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat2 */
	0x132 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat3 */
	0x134 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat4 */
	0x136 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat5 */
	0x138 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat6 */
	0x13a (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc2_dat7 */
	>;
	};

	display_pins: pinmux_display_pins {
	pinctrl-single,pins = <
	0x0d4 (PIN_OUTPUT \| MUX_MODE4) /* RX51_LCD_RESET_GPIO */
	>;
	};
	};

	&i2c1 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c1_pins>;

	clock-frequency = <2200000>;

	twl: twl@48 {
	reg = <0x48>;
	interrupts = <7>; /* SYS_NIRQ cascaded to intc */
	interrupt-parent = <&intc>;
	};
	};

	#include "twl4030.dtsi"
	#include "twl4030_omap3.dtsi"

	&vaux1 {
	regulator-name = "V28";
	regulator-min-microvolt = <2800000>;
	regulator-max-microvolt = <2800000>;
	regulator-always-on; /* due battery cover sensor */
	};

	&vaux2 {
	regulator-name = "VCSI";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	};

	&vaux3 {
	regulator-name = "VMMC2_30";
	regulator-min-microvolt = <2800000>;
	regulator-max-microvolt = <3000000>;
	};

	&vaux4 {
	regulator-name = "VCAM_ANA_28";
	regulator-min-microvolt = <2800000>;
	regulator-max-microvolt = <2800000>;
	};

	&vmmc1 {
	regulator-name = "VMMC1";
	regulator-min-microvolt = <1850000>;
	regulator-max-microvolt = <3150000>;
	};

	&vmmc2 {
	regulator-name = "V28_A";
	regulator-min-microvolt = <2800000>;
	regulator-max-microvolt = <3000000>;
	regulator-always-on; /* due VIO leak to AIC34 VDDs */
	};

	&vpll1 {
	regulator-name = "VPLL";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	regulator-always-on;
	};

	&vpll2 {
	regulator-name = "VSDI_CSI";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	regulator-always-on;
	};

	&vsim {
	regulator-name = "VMMC2_IO_18";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	};

	&vio {
	regulator-name = "VIO";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;

	};

	&vintana1 {
	regulator-name = "VINTANA1";
	/* fixed to 1500000 */
	regulator-always-on;
	};

	&vintana2 {
	regulator-name = "VINTANA2";
	regulator-min-microvolt = <2750000>;
	regulator-max-microvolt = <2750000>;
	regulator-always-on;
	};

	&vintdig {
	regulator-name = "VINTDIG";
	/* fixed to 1500000 */
	regulator-always-on;
	};

	&twl {
	twl_audio: audio {
	compatible = "ti,twl4030-audio";
	ti,enable-vibra = <1>;
	};
	};

	&twl_gpio {
	ti,pullups = <0x0>;
	ti,pulldowns = <0x03ff3f>; /* BIT(0..5) \| BIT(8..17) */
	};

	&i2c2 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c2_pins>;

	clock-frequency = <100000>;

	tlv320aic3x: tlv320aic3x@18 {
	compatible = "ti,tlv320aic3x";
	reg = <0x18>;
	gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
	ai3x-gpio-func = <
	0 /* AIC3X_GPIO1_FUNC_DISABLED */
	5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
	>;

	AVDD-supply = <&vmmc2>;
	DRVDD-supply = <&vmmc2>;
	IOVDD-supply = <&vio>;
	DVDD-supply = <&vio>;
	};

	tlv320aic3x_aux: tlv320aic3x@19 {
	compatible = "ti,tlv320aic3x";
	reg = <0x19>;
	gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */

	AVDD-supply = <&vmmc2>;
	DRVDD-supply = <&vmmc2>;
	IOVDD-supply = <&vio>;
	DVDD-supply = <&vio>;
	};

	lp5523: lp5523@32 {
	compatible = "national,lp5523";
	reg = <0x32>;
	clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
	enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */

	chan0 {
	chan-name = "lp5523:kb1";
	led-cur = /bits/ 8 <50>;
	max-cur = /bits/ 8 <100>;
	};

	chan1 {
	chan-name = "lp5523:kb2";
	led-cur = /bits/ 8 <50>;
	max-cur = /bits/ 8 <100>;
	};

	chan2 {
	chan-name = "lp5523:kb3";
	led-cur = /bits/ 8 <50>;
	max-cur = /bits/ 8 <100>;
	};

	chan3 {
	chan-name = "lp5523:kb4";
	led-cur = /bits/ 8 <50>;
	max-cur = /bits/ 8 <100>;
	};

	chan4 {
	chan-name = "lp5523:b";
	led-cur = /bits/ 8 <50>;
	max-cur = /bits/ 8 <100>;
	};

	chan5 {
	chan-name = "lp5523:g";
	led-cur = /bits/ 8 <50>;
	max-cur = /bits/ 8 <100>;
	};

	chan6 {
	chan-name = "lp5523:r";
	led-cur = /bits/ 8 <50>;
	max-cur = /bits/ 8 <100>;
	};

	chan7 {
	chan-name = "lp5523:kb5";
	led-cur = /bits/ 8 <50>;
	max-cur = /bits/ 8 <100>;
	};

	chan8 {
	chan-name = "lp5523:kb6";
	led-cur = /bits/ 8 <50>;
	max-cur = /bits/ 8 <100>;
	};
	};

	bq27200: bq27200@55 {
	compatible = "ti,bq27200";
	reg = <0x55>;
	};
	};

	&i2c3 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c3_pins>;

	clock-frequency = <400000>;
	};

	&mmc1 {
	pinctrl-names = "default";
	pinctrl-0 = <&mmc1_pins>;
	vmmc-supply = <&vmmc1>;
	bus-width = <4>;
	cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
	};

	/* most boards use vaux3, only some old versions use vmmc2 instead */
	&mmc2 {
	pinctrl-names = "default";
	pinctrl-0 = <&mmc2_pins>;
	vmmc-supply = <&vaux3>;
	vmmc_aux-supply = <&vsim>;
	bus-width = <8>;
	non-removable;
	};

	&mmc3 {
	status = "disabled";
	};

	&gpmc {
	ranges = <0 0 0x04000000 0x10000000>; /* 256MB */

	/* gpio-irq for dma: 65 */

	onenand@0,0 {
	#address-cells = <1>;
	#size-cells = <1>;
	reg = <0 0 0x10000000>;

	gpmc,sync-read;
	gpmc,sync-write;
	gpmc,burst-length = <16>;
	gpmc,burst-read;
	gpmc,burst-wrap;
	gpmc,burst-write;
	gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */
	gpmc,mux-add-data = <2>; /* GPMC_MUX_AD */
	gpmc,cs-on-ns = <0>;
	gpmc,cs-rd-off-ns = <87>;
	gpmc,cs-wr-off-ns = <87>;
	gpmc,adv-on-ns = <0>;
	gpmc,adv-rd-off-ns = <10>;
	gpmc,adv-wr-off-ns = <10>;
	gpmc,oe-on-ns = <15>;
	gpmc,oe-off-ns = <87>;
	gpmc,we-on-ns = <0>;
	gpmc,we-off-ns = <87>;
	gpmc,rd-cycle-ns = <112>;
	gpmc,wr-cycle-ns = <112>;
	gpmc,access-ns = <81>;
	gpmc,page-burst-access-ns = <15>;
	gpmc,bus-turnaround-ns = <0>;
	gpmc,cycle2cycle-delay-ns = <0>;
	gpmc,wait-monitoring-ns = <0>;
	gpmc,clk-activation-ns = <5>;
	gpmc,wr-data-mux-bus-ns = <30>;
	gpmc,wr-access-ns = <81>;
	gpmc,sync-clk-ps = <15000>;

	/*
	* MTD partition table corresponding to Nokia's
	* Maemo 5 (Fremantle) release.
	*/
	partition@0 {
	label = "bootloader";
	reg = <0x00000000 0x00020000>;
	read-only;
	};
	partition@1 {
	label = "config";
	reg = <0x00020000 0x00060000>;
	};
	partition@2 {
	label = "log";
	reg = <0x00080000 0x00040000>;
	};
	partition@3 {
	label = "kernel";
	reg = <0x000c0000 0x00200000>;
	};
	partition@4 {
	label = "initfs";
	reg = <0x002c0000 0x00200000>;
	};
	partition@5 {
	label = "rootfs";
	reg = <0x004c0000 0x0fb40000>;
	};
	};
	};

	&mcspi1 {
	/*
	* For some reason, touchscreen is necessary for screen to work at
	* all on real hw. It works well without it on emulator.
	*
	* Also... order in the device tree actually matters here.
	*/
	tsc2005@0 {
	compatible = "tsc2005";
	spi-max-frequency = <6000000>;
	reg = <0>;
	};
	mipid@2 {
	compatible = "acx565akm";
	spi-max-frequency = <6000000>;
	reg = <2>;

	pinctrl-names = "default";
	pinctrl-0 = <&display_pins>;
	};
	};

	&usb_otg_hs {
	interface-type = <0>;
	usb-phy = <&usb2_phy>;
	phys = <&usb2_phy>;
	phy-names = "usb2-phy";
	mode = <2>;
	power = <50>;
	};

	&uart1 {
	status = "disabled";
	};

	&uart2 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart2_pins>;
	};

	&uart3 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart3_pins>;
	};