| /* |
| * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * vineetg: March 2009 |
| * -Implemented task_pt_regs( ) |
| * |
| * Amit Bhor, Sameer Dhavale, Ashwin Chaugule: Codito Technologies 2004 |
| */ |
| |
| #ifndef __ASM_ARC_PROCESSOR_H |
| #define __ASM_ARC_PROCESSOR_H |
| |
| #ifdef __KERNEL__ |
| |
| #ifndef __ASSEMBLY__ |
| |
| #include <asm/arcregs.h> /* for STATUS_E1_MASK et all */ |
| #include <asm/ptrace.h> |
| |
| /* Arch specific stuff which needs to be saved per task. |
| * However these items are not so important so as to earn a place in |
| * struct thread_info |
| */ |
| struct thread_struct { |
| unsigned long ksp; /* kernel mode stack pointer */ |
| unsigned long callee_reg; /* pointer to callee regs */ |
| unsigned long fault_address; /* dbls as brkpt holder as well */ |
| #ifdef CONFIG_ARC_FPU_SAVE_RESTORE |
| struct arc_fpu fpu; |
| #endif |
| }; |
| |
| #define INIT_THREAD { \ |
| .ksp = sizeof(init_stack) + (unsigned long) init_stack, \ |
| } |
| |
| /* Forward declaration, a strange C thing */ |
| struct task_struct; |
| |
| /* |
| * Return saved PC of a blocked thread. |
| */ |
| unsigned long thread_saved_pc(struct task_struct *t); |
| |
| #define task_pt_regs(p) \ |
| ((struct pt_regs *)(THREAD_SIZE + (void *)task_stack_page(p)) - 1) |
| |
| /* Free all resources held by a thread. */ |
| #define release_thread(thread) do { } while (0) |
| |
| /* Prepare to copy thread state - unlazy all lazy status */ |
| #define prepare_to_copy(tsk) do { } while (0) |
| |
| /* |
| * A lot of busy-wait loops in SMP are based off of non-volatile data otherwise |
| * get optimised away by gcc |
| */ |
| #ifdef CONFIG_SMP |
| #define cpu_relax() __asm__ __volatile__ ("" : : : "memory") |
| #else |
| #define cpu_relax() do { } while (0) |
| #endif |
| |
| #define copy_segments(tsk, mm) do { } while (0) |
| #define release_segments(mm) do { } while (0) |
| |
| #define KSTK_EIP(tsk) (task_pt_regs(tsk)->ret) |
| |
| /* |
| * Where abouts of Task's sp, fp, blink when it was last seen in kernel mode. |
| * Look in process.c for details of kernel stack layout |
| */ |
| #define KSTK_ESP(tsk) (tsk->thread.ksp) |
| |
| #define KSTK_REG(tsk, off) (*((unsigned int *)(KSTK_ESP(tsk) + \ |
| sizeof(struct callee_regs) + off))) |
| |
| #define KSTK_BLINK(tsk) KSTK_REG(tsk, 4) |
| #define KSTK_FP(tsk) KSTK_REG(tsk, 0) |
| |
| /* |
| * Do necessary setup to start up a newly executed thread. |
| * |
| * E1,E2 so that Interrupts are enabled in user mode |
| * L set, so Loop inhibited to begin with |
| * lp_start and lp_end seeded with bogus non-zero values so to easily catch |
| * the ARC700 sr to lp_start hardware bug |
| */ |
| #define start_thread(_regs, _pc, _usp) \ |
| do { \ |
| set_fs(USER_DS); /* reads from user space */ \ |
| (_regs)->ret = (_pc); \ |
| /* Interrupts enabled in User Mode */ \ |
| (_regs)->status32 = STATUS_U_MASK | STATUS_L_MASK \ |
| | STATUS_E1_MASK | STATUS_E2_MASK; \ |
| (_regs)->sp = (_usp); \ |
| /* bogus seed values for debugging */ \ |
| (_regs)->lp_start = 0x10; \ |
| (_regs)->lp_end = 0x80; \ |
| } while (0) |
| |
| extern unsigned int get_wchan(struct task_struct *p); |
| |
| /* |
| * Default implementation of macro that returns current |
| * instruction pointer ("program counter"). |
| * Should the PC register be read instead ? This macro does not seem to |
| * be used in many places so this wont be all that bad. |
| */ |
| #define current_text_addr() ({ __label__ _l; _l: &&_l; }) |
| |
| #endif /* !__ASSEMBLY__ */ |
| |
| /* Kernels Virtual memory area. |
| * Unlike other architectures(MIPS, sh, cris ) ARC 700 does not have a |
| * "kernel translated" region (like KSEG2 in MIPS). So we use a upper part |
| * of the translated bottom 2GB for kernel virtual memory and protect |
| * these pages from user accesses by disabling Ru, Eu and Wu. |
| */ |
| #define VMALLOC_SIZE (0x10000000) /* 256M */ |
| #define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE) |
| #define VMALLOC_END (PAGE_OFFSET) |
| |
| /* Most of the architectures seem to be keeping some kind of padding between |
| * userspace TASK_SIZE and PAGE_OFFSET. i.e TASK_SIZE != PAGE_OFFSET. |
| */ |
| #define USER_KERNEL_GUTTER 0x10000000 |
| |
| /* User address space: |
| * On ARC700, CPU allows the entire lower half of 32 bit address space to be |
| * translated. Thus potentially 2G (0:0x7FFF_FFFF) could be User vaddr space. |
| * However we steal 256M for kernel addr (0x7000_0000:0x7FFF_FFFF) and another |
| * 256M (0x6000_0000:0x6FFF_FFFF) is gutter between user/kernel spaces |
| * Thus total User vaddr space is (0:0x5FFF_FFFF) |
| */ |
| #define TASK_SIZE (PAGE_OFFSET - VMALLOC_SIZE - USER_KERNEL_GUTTER) |
| |
| #define STACK_TOP TASK_SIZE |
| #define STACK_TOP_MAX STACK_TOP |
| |
| /* This decides where the kernel will search for a free chunk of vm |
| * space during mmap's. |
| */ |
| #define TASK_UNMAPPED_BASE (TASK_SIZE / 3) |
| |
| #endif /* __KERNEL__ */ |
| |
| #endif /* __ASM_ARC_PROCESSOR_H */ |