Documentation/DocBook/media/v4l/selections-common.xml

<section id="v4l2-selections-common">

  <title>Common selection definitions</title>

  <para>While the <link linkend="selection-api">V4L2 selection
  API</link> and <link linkend="v4l2-subdev-selections">V4L2 subdev
  selection APIs</link> are very similar, there's one fundamental
  difference between the two. On sub-device API, the selection
  rectangle refers to the media bus format, and is bound to a
  sub-device's pad. On the V4L2 interface the selection rectangles
  refer to the in-memory pixel format.</para>

  <para>This section defines the common definitions of the
  selection interfaces on the two APIs.</para>

  <section id="v4l2-selection-targets">

    <title>Selection targets</title>

    <para>The precise meaning of the selection targets may be
    dependent on which of the two interfaces they are used.</para>

    <table pgwide="1" frame="none" id="v4l2-selection-targets-table">
    <title>Selection target definitions</title>
      <tgroup cols="5">
	<colspec colname="c1" />
	<colspec colname="c2" />
	<colspec colname="c3" />
	<colspec colname="c4" />
	<colspec colname="c5" />
	&cs-def;
	<thead>
	  <row rowsep="1">
	    <entry align="left">Target name</entry>
	    <entry align="left">id</entry>
	    <entry align="left">Definition</entry>
	    <entry align="left">Valid for V4L2</entry>
	    <entry align="left">Valid for V4L2 subdev</entry>
	  </row>
	</thead>
	<tbody valign="top">
	  <row>
	    <entry><constant>V4L2_SEL_TGT_CROP</constant></entry>
	    <entry>0x0000</entry>
	    <entry>Crop rectangle. Defines the cropped area.</entry>
	    <entry>Yes</entry>
	    <entry>Yes</entry>
	  </row>
	  <row>
	    <entry><constant>V4L2_SEL_TGT_CROP_DEFAULT</constant></entry>
	    <entry>0x0001</entry>
	    <entry>Suggested cropping rectangle that covers the "whole picture".</entry>
	    <entry>Yes</entry>
	    <entry>No</entry>
	  </row>
	  <row>
	    <entry><constant>V4L2_SEL_TGT_CROP_BOUNDS</constant></entry>
	    <entry>0x0002</entry>
	    <entry>Bounds of the crop rectangle. All valid crop
	    rectangles fit inside the crop bounds rectangle.
	    </entry>
	    <entry>Yes</entry>
	    <entry>Yes</entry>
	  </row>
	  <row>
	    <entry><constant>V4L2_SEL_TGT_COMPOSE</constant></entry>
	    <entry>0x0100</entry>
	    <entry>Compose rectangle. Used to configure scaling
	    and composition.</entry>
	    <entry>Yes</entry>
	    <entry>Yes</entry>
	  </row>
	  <row>
	    <entry><constant>V4L2_SEL_TGT_COMPOSE_DEFAULT</constant></entry>
	    <entry>0x0101</entry>
	    <entry>Suggested composition rectangle that covers the "whole picture".</entry>
	    <entry>Yes</entry>
	    <entry>No</entry>
	  </row>
	  <row>
	    <entry><constant>V4L2_SEL_TGT_COMPOSE_BOUNDS</constant></entry>
	    <entry>0x0102</entry>
	    <entry>Bounds of the compose rectangle. All valid compose
	    rectangles fit inside the compose bounds rectangle.</entry>
	    <entry>Yes</entry>
	    <entry>Yes</entry>
	  </row>
	  <row>
	    <entry><constant>V4L2_SEL_TGT_COMPOSE_PADDED</constant></entry>
	    <entry>0x0103</entry>
	    <entry>The active area and all padding pixels that are inserted or
	    modified by hardware.</entry>
	    <entry>Yes</entry>
	    <entry>No</entry>
	  </row>
	</tbody>
      </tgroup>
    </table>

  </section>

  <section id="v4l2-selection-flags">

    <title>Selection flags</title>

    <table pgwide="1" frame="none" id="v4l2-selection-flags-table">
    <title>Selection flag definitions</title>
      <tgroup cols="5">
	<colspec colname="c1" />
	<colspec colname="c2" />
	<colspec colname="c3" />
	<colspec colname="c4" />
	<colspec colname="c5" />
	&cs-def;
	<thead>
	<row rowsep="1">
	    <entry align="left">Flag name</entry>
	    <entry align="left">id</entry>
	    <entry align="left">Definition</entry>
	    <entry align="left">Valid for V4L2</entry>
	    <entry align="left">Valid for V4L2 subdev</entry>
	</row>
	</thead>
	<tbody valign="top">
	  <row>
	    <entry><constant>V4L2_SEL_FLAG_GE</constant></entry>
	    <entry>(1 &lt;&lt; 0)</entry>
	    <entry>Suggest the driver it should choose greater or
	    equal rectangle (in size) than was requested. Albeit the
	    driver may choose a lesser size, it will only do so due to
	    hardware limitations. Without this flag (and
	    <constant>V4L2_SEL_FLAG_LE</constant>) the
	    behaviour is to choose the closest possible
	    rectangle.</entry>
	    <entry>Yes</entry>
	    <entry>Yes</entry>
	  </row>
	  <row>
	    <entry><constant>V4L2_SEL_FLAG_LE</constant></entry>
	    <entry>(1 &lt;&lt; 1)</entry>
	    <entry>Suggest the driver it
	    should choose lesser or equal rectangle (in size) than was
	    requested. Albeit the driver may choose a greater size, it
	    will only do so due to hardware limitations.</entry>
	    <entry>Yes</entry>
	    <entry>Yes</entry>
	  </row>
	  <row>
	    <entry><constant>V4L2_SEL_FLAG_KEEP_CONFIG</constant></entry>
	    <entry>(1 &lt;&lt; 2)</entry>
	    <entry>The configuration must not be propagated to any
	    further processing steps. If this flag is not given, the
	    configuration is propagated inside the subdevice to all
	    further processing steps.</entry>
	    <entry>No</entry>
	    <entry>Yes</entry>
	  </row>
	</tbody>
      </tgroup>
    </table>

  </section>

</section>