| * Clock bindings for Freescale i.MX27 |
| |
| Required properties: |
| - compatible: Should be "fsl,imx27-ccm" |
| - reg: Address and length of the register set |
| - interrupts: Should contain CCM interrupt |
| - #clock-cells: Should be <1> |
| |
| The clock consumer should specify the desired clock by having the clock |
| ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx27-clock.h |
| for the full list of i.MX27 clock IDs. |
| |
| Examples: |
| clks: ccm@10027000{ |
| compatible = "fsl,imx27-ccm"; |
| reg = <0x10027000 0x1000>; |
| #clock-cells = <1>; |
| }; |
| |
| uart1: serial@1000a000 { |
| compatible = "fsl,imx27-uart", "fsl,imx21-uart"; |
| reg = <0x1000a000 0x1000>; |
| interrupts = <20>; |
| clocks = <&clks IMX27_CLK_UART1_IPG_GATE>, |
| <&clks IMX27_CLK_PER1_GATE>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
