drivers/net/phy/smsc.c - kernel/lockdown - Git at Google

 /*
  * drivers/net/phy/smsc.c
  *
  * Driver for SMSC PHYs
  *
  * Author: Herbert Valerio Riedel
  *
  * Copyright (c) 2006 Herbert Valerio Riedel <hvr@gnu.org>
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  *
  * Support added for SMSC LAN8187 and LAN8700 by steve.glendinning@shawell.net
  *
  */

 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/mii.h>
 #include <linux/ethtool.h>
 #include <linux/phy.h>
 #include <linux/netdevice.h>
 #include <linux/smscphy.h>

 static int smsc_phy_config_intr(struct phy_device *phydev)
 {
 	int rc = phy_write (phydev, MII_LAN83C185_IM,
 			((PHY_INTERRUPT_ENABLED == phydev->interrupts)
 			? MII_LAN83C185_ISF_INT_PHYLIB_EVENTS
 			: 0));

 	return rc < 0 ? rc : 0;
 }

 static int smsc_phy_ack_interrupt(struct phy_device *phydev)
 {
 	int rc = phy_read (phydev, MII_LAN83C185_ISF);

 	return rc < 0 ? rc : 0;
 }

 static int smsc_phy_config_init(struct phy_device *phydev)
 {
 	int rc = phy_read(phydev, MII_LAN83C185_SPECIAL_MODES);
 	if (rc < 0)
 		return rc;

 	/* If the SMSC PHY is in power down mode, then set it
 	 * in all capable mode before using it.
 	 */
 	if ((rc & MII_LAN83C185_MODE_MASK) == MII_LAN83C185_MODE_POWERDOWN) {
 		int timeout = 50000;

 		/* set "all capable" mode and reset the phy */
 		rc |= MII_LAN83C185_MODE_ALL;
 		phy_write(phydev, MII_LAN83C185_SPECIAL_MODES, rc);
 		phy_write(phydev, MII_BMCR, BMCR_RESET);

 		/* wait end of reset (max 500 ms) */
 		do {
 			udelay(10);
 			if (timeout-- == 0)
 				return -1;
 			rc = phy_read(phydev, MII_BMCR);
 		} while (rc & BMCR_RESET);
 	}

 	rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
 	if (rc < 0)
 		return rc;

 	/* Enable energy detect mode for this SMSC Transceivers */
 	rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
 		       rc | MII_LAN83C185_EDPWRDOWN);
 	if (rc < 0)
 		return rc;

 	return smsc_phy_ack_interrupt (phydev);
 }

 static int lan911x_config_init(struct phy_device *phydev)
 {
 	return smsc_phy_ack_interrupt(phydev);
 }

 /*
  * The LAN8710/LAN8720 requires a minimum of 2 link pulses within 64ms of each
  * other in order to set the ENERGYON bit and exit EDPD mode.  If a link partner
  * does send the pulses within this interval, the PHY will remained powered
  * down.
  *
  * This workaround will manually toggle the PHY on/off upon calls to read_status
  * in order to generate link test pulses if the link is down.  If a link partner
  * is present, it will respond to the pulses, which will cause the ENERGYON bit
  * to be set and will cause the EDPD mode to be exited.
  */
 static int lan87xx_read_status(struct phy_device *phydev)
 {
 	int err = genphy_read_status(phydev);

 	if (!phydev->link) {
 		/* Disable EDPD to wake up PHY */
 		int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
 		if (rc < 0)
 			return rc;

 		rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
 			       rc & ~MII_LAN83C185_EDPWRDOWN);
 		if (rc < 0)
 			return rc;

 		/* Sleep 64 ms to allow ~5 link test pulses to be sent */
 		msleep(64);

 		/* Re-enable EDPD */
 		rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
 		if (rc < 0)
 			return rc;

 		rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
 			       rc | MII_LAN83C185_EDPWRDOWN);
 		if (rc < 0)
 			return rc;
 	}

 	return err;
 }

 static struct phy_driver smsc_phy_driver[] = {
 {
 	.phy_id		= 0x0007c0a0, /* OUI=0x00800f, Model#=0x0a */
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "SMSC LAN83C185",

 	.features	= (PHY_BASIC_FEATURES | SUPPORTED_Pause
 				| SUPPORTED_Asym_Pause),
 	.flags		= PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG,

 	/* basic functions */
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,
 	.config_init	= smsc_phy_config_init,

 	/* IRQ related */
 	.ack_interrupt	= smsc_phy_ack_interrupt,
 	.config_intr	= smsc_phy_config_intr,

 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,

 	.driver		= { .owner = THIS_MODULE, }
 }, {
 	.phy_id		= 0x0007c0b0, /* OUI=0x00800f, Model#=0x0b */
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "SMSC LAN8187",

 	.features	= (PHY_BASIC_FEATURES | SUPPORTED_Pause
 				| SUPPORTED_Asym_Pause),
 	.flags		= PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG,

 	/* basic functions */
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,
 	.config_init	= smsc_phy_config_init,

 	/* IRQ related */
 	.ack_interrupt	= smsc_phy_ack_interrupt,
 	.config_intr	= smsc_phy_config_intr,

 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,

 	.driver		= { .owner = THIS_MODULE, }
 }, {
 	.phy_id		= 0x0007c0c0, /* OUI=0x00800f, Model#=0x0c */
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "SMSC LAN8700",

 	.features	= (PHY_BASIC_FEATURES | SUPPORTED_Pause
 				| SUPPORTED_Asym_Pause),
 	.flags		= PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG,

 	/* basic functions */
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,
 	.config_init	= smsc_phy_config_init,

 	/* IRQ related */
 	.ack_interrupt	= smsc_phy_ack_interrupt,
 	.config_intr	= smsc_phy_config_intr,

 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,

 	.driver		= { .owner = THIS_MODULE, }
 }, {
 	.phy_id		= 0x0007c0d0, /* OUI=0x00800f, Model#=0x0d */
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "SMSC LAN911x Internal PHY",

 	.features	= (PHY_BASIC_FEATURES | SUPPORTED_Pause
 				| SUPPORTED_Asym_Pause),
 	.flags		= PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG,

 	/* basic functions */
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,
 	.config_init	= lan911x_config_init,

 	/* IRQ related */
 	.ack_interrupt	= smsc_phy_ack_interrupt,
 	.config_intr	= smsc_phy_config_intr,

 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,

 	.driver		= { .owner = THIS_MODULE, }
 }, {
 	.phy_id		= 0x0007c0f0, /* OUI=0x00800f, Model#=0x0f */
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "SMSC LAN8710/LAN8720",

 	.features	= (PHY_BASIC_FEATURES | SUPPORTED_Pause
 				| SUPPORTED_Asym_Pause),
 	.flags		= PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG,

 	/* basic functions */
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= lan87xx_read_status,
 	.config_init	= smsc_phy_config_init,

 	/* IRQ related */
 	.ack_interrupt	= smsc_phy_ack_interrupt,
 	.config_intr	= smsc_phy_config_intr,

 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,

 	.driver		= { .owner = THIS_MODULE, }
 } };

 static int __init smsc_init(void)
 {
 	return phy_drivers_register(smsc_phy_driver,
 		ARRAY_SIZE(smsc_phy_driver));
 }

 static void __exit smsc_exit(void)
 {
 	return phy_drivers_unregister(smsc_phy_driver,
 		ARRAY_SIZE(smsc_phy_driver));
 }

 MODULE_DESCRIPTION("SMSC PHY driver");
 MODULE_AUTHOR("Herbert Valerio Riedel");
 MODULE_LICENSE("GPL");

 module_init(smsc_init);
 module_exit(smsc_exit);

 static struct mdio_device_id __maybe_unused smsc_tbl[] = {
 	{ 0x0007c0a0, 0xfffffff0 },
 	{ 0x0007c0b0, 0xfffffff0 },
 	{ 0x0007c0c0, 0xfffffff0 },
 	{ 0x0007c0d0, 0xfffffff0 },
 	{ 0x0007c0f0, 0xfffffff0 },
 	{ }
 };

 MODULE_DEVICE_TABLE(mdio, smsc_tbl);
	/*
	* drivers/net/phy/smsc.c
	*
	* Driver for SMSC PHYs
	*
	* Author: Herbert Valerio Riedel
	*
	* Copyright (c) 2006 Herbert Valerio Riedel <hvr@gnu.org>
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms of the GNU General Public License as published by the
	* Free Software Foundation; either version 2 of the License, or (at your
	* option) any later version.
	*
	* Support added for SMSC LAN8187 and LAN8700 by steve.glendinning@shawell.net
	*
	*/

	#include <linux/kernel.h>
	#include <linux/module.h>
	#include <linux/mii.h>
	#include <linux/ethtool.h>
	#include <linux/phy.h>
	#include <linux/netdevice.h>
	#include <linux/smscphy.h>

	static int smsc_phy_config_intr(struct phy_device *phydev)
	{
	int rc = phy_write (phydev, MII_LAN83C185_IM,
	((PHY_INTERRUPT_ENABLED == phydev->interrupts)
	? MII_LAN83C185_ISF_INT_PHYLIB_EVENTS
	: 0));

	return rc < 0 ? rc : 0;
	}

	static int smsc_phy_ack_interrupt(struct phy_device *phydev)
	{
	int rc = phy_read (phydev, MII_LAN83C185_ISF);

	return rc < 0 ? rc : 0;
	}

	static int smsc_phy_config_init(struct phy_device *phydev)
	{
	int rc = phy_read(phydev, MII_LAN83C185_SPECIAL_MODES);
	if (rc < 0)
	return rc;

	/* If the SMSC PHY is in power down mode, then set it
	* in all capable mode before using it.
	*/
	if ((rc & MII_LAN83C185_MODE_MASK) == MII_LAN83C185_MODE_POWERDOWN) {
	int timeout = 50000;

	/* set "all capable" mode and reset the phy */
	rc \|= MII_LAN83C185_MODE_ALL;
	phy_write(phydev, MII_LAN83C185_SPECIAL_MODES, rc);
	phy_write(phydev, MII_BMCR, BMCR_RESET);

	/* wait end of reset (max 500 ms) */
	do {
	udelay(10);
	if (timeout-- == 0)
	return -1;
	rc = phy_read(phydev, MII_BMCR);
	} while (rc & BMCR_RESET);
	}

	rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
	if (rc < 0)
	return rc;

	/* Enable energy detect mode for this SMSC Transceivers */
	rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
	rc \| MII_LAN83C185_EDPWRDOWN);
	if (rc < 0)
	return rc;

	return smsc_phy_ack_interrupt (phydev);
	}

	static int lan911x_config_init(struct phy_device *phydev)
	{
	return smsc_phy_ack_interrupt(phydev);
	}

	/*
	* The LAN8710/LAN8720 requires a minimum of 2 link pulses within 64ms of each
	* other in order to set the ENERGYON bit and exit EDPD mode. If a link partner
	* does send the pulses within this interval, the PHY will remained powered
	* down.
	*
	* This workaround will manually toggle the PHY on/off upon calls to read_status
	* in order to generate link test pulses if the link is down. If a link partner
	* is present, it will respond to the pulses, which will cause the ENERGYON bit
	* to be set and will cause the EDPD mode to be exited.
	*/
	static int lan87xx_read_status(struct phy_device *phydev)
	{
	int err = genphy_read_status(phydev);

	if (!phydev->link) {
	/* Disable EDPD to wake up PHY */
	int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
	if (rc < 0)
	return rc;

	rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
	rc & ~MII_LAN83C185_EDPWRDOWN);
	if (rc < 0)
	return rc;

	/* Sleep 64 ms to allow ~5 link test pulses to be sent */
	msleep(64);

	/* Re-enable EDPD */
	rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
	if (rc < 0)
	return rc;

	rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
	rc \| MII_LAN83C185_EDPWRDOWN);
	if (rc < 0)
	return rc;
	}

	return err;
	}

	static struct phy_driver smsc_phy_driver[] = {
	{
	.phy_id = 0x0007c0a0, /* OUI=0x00800f, Model#=0x0a */
	.phy_id_mask = 0xfffffff0,
	.name = "SMSC LAN83C185",

	.features = (PHY_BASIC_FEATURES \| SUPPORTED_Pause
	\| SUPPORTED_Asym_Pause),
	.flags = PHY_HAS_INTERRUPT \| PHY_HAS_MAGICANEG,

	/* basic functions */
	.config_aneg = genphy_config_aneg,
	.read_status = genphy_read_status,
	.config_init = smsc_phy_config_init,

	/* IRQ related */
	.ack_interrupt = smsc_phy_ack_interrupt,
	.config_intr = smsc_phy_config_intr,

	.suspend = genphy_suspend,
	.resume = genphy_resume,

	.driver = { .owner = THIS_MODULE, }
	}, {
	.phy_id = 0x0007c0b0, /* OUI=0x00800f, Model#=0x0b */
	.phy_id_mask = 0xfffffff0,
	.name = "SMSC LAN8187",

	.features = (PHY_BASIC_FEATURES \| SUPPORTED_Pause
	\| SUPPORTED_Asym_Pause),
	.flags = PHY_HAS_INTERRUPT \| PHY_HAS_MAGICANEG,

	/* basic functions */
	.config_aneg = genphy_config_aneg,
	.read_status = genphy_read_status,
	.config_init = smsc_phy_config_init,

	/* IRQ related */
	.ack_interrupt = smsc_phy_ack_interrupt,
	.config_intr = smsc_phy_config_intr,

	.suspend = genphy_suspend,
	.resume = genphy_resume,

	.driver = { .owner = THIS_MODULE, }
	}, {
	.phy_id = 0x0007c0c0, /* OUI=0x00800f, Model#=0x0c */
	.phy_id_mask = 0xfffffff0,
	.name = "SMSC LAN8700",

	.features = (PHY_BASIC_FEATURES \| SUPPORTED_Pause
	\| SUPPORTED_Asym_Pause),
	.flags = PHY_HAS_INTERRUPT \| PHY_HAS_MAGICANEG,

	/* basic functions */
	.config_aneg = genphy_config_aneg,
	.read_status = genphy_read_status,
	.config_init = smsc_phy_config_init,

	/* IRQ related */
	.ack_interrupt = smsc_phy_ack_interrupt,
	.config_intr = smsc_phy_config_intr,

	.suspend = genphy_suspend,
	.resume = genphy_resume,

	.driver = { .owner = THIS_MODULE, }
	}, {
	.phy_id = 0x0007c0d0, /* OUI=0x00800f, Model#=0x0d */
	.phy_id_mask = 0xfffffff0,
	.name = "SMSC LAN911x Internal PHY",

	.features = (PHY_BASIC_FEATURES \| SUPPORTED_Pause
	\| SUPPORTED_Asym_Pause),
	.flags = PHY_HAS_INTERRUPT \| PHY_HAS_MAGICANEG,

	/* basic functions */
	.config_aneg = genphy_config_aneg,
	.read_status = genphy_read_status,
	.config_init = lan911x_config_init,

	/* IRQ related */
	.ack_interrupt = smsc_phy_ack_interrupt,
	.config_intr = smsc_phy_config_intr,

	.suspend = genphy_suspend,
	.resume = genphy_resume,

	.driver = { .owner = THIS_MODULE, }
	}, {
	.phy_id = 0x0007c0f0, /* OUI=0x00800f, Model#=0x0f */
	.phy_id_mask = 0xfffffff0,
	.name = "SMSC LAN8710/LAN8720",

	.features = (PHY_BASIC_FEATURES \| SUPPORTED_Pause
	\| SUPPORTED_Asym_Pause),
	.flags = PHY_HAS_INTERRUPT \| PHY_HAS_MAGICANEG,

	/* basic functions */
	.config_aneg = genphy_config_aneg,
	.read_status = lan87xx_read_status,
	.config_init = smsc_phy_config_init,

	/* IRQ related */
	.ack_interrupt = smsc_phy_ack_interrupt,
	.config_intr = smsc_phy_config_intr,

	.suspend = genphy_suspend,
	.resume = genphy_resume,

	.driver = { .owner = THIS_MODULE, }
	} };

	static int __init smsc_init(void)
	{
	return phy_drivers_register(smsc_phy_driver,
	ARRAY_SIZE(smsc_phy_driver));
	}

	static void __exit smsc_exit(void)
	{
	return phy_drivers_unregister(smsc_phy_driver,
	ARRAY_SIZE(smsc_phy_driver));
	}

	MODULE_DESCRIPTION("SMSC PHY driver");
	MODULE_AUTHOR("Herbert Valerio Riedel");
	MODULE_LICENSE("GPL");

	module_init(smsc_init);
	module_exit(smsc_exit);

	static struct mdio_device_id __maybe_unused smsc_tbl[] = {
	{ 0x0007c0a0, 0xfffffff0 },
	{ 0x0007c0b0, 0xfffffff0 },
	{ 0x0007c0c0, 0xfffffff0 },
	{ 0x0007c0d0, 0xfffffff0 },
	{ 0x0007c0f0, 0xfffffff0 },
	{ }
	};

	MODULE_DEVICE_TABLE(mdio, smsc_tbl);