| /* |
| * MTD map driver for flash on the DC21285 (the StrongARM-110 companion chip) |
| * |
| * (C) 2000 Nicolas Pitre <nico@fluxnic.net> |
| * |
| * This code is GPL |
| */ |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/slab.h> |
| |
| #include <linux/mtd/mtd.h> |
| #include <linux/mtd/map.h> |
| #include <linux/mtd/partitions.h> |
| |
| #include <asm/io.h> |
| #include <asm/hardware/dec21285.h> |
| #include <asm/mach-types.h> |
| |
| |
| static struct mtd_info *dc21285_mtd; |
| |
| #ifdef CONFIG_ARCH_NETWINDER |
| /* |
| * This is really ugly, but it seams to be the only |
| * realiable way to do it, as the cpld state machine |
| * is unpredictible. So we have a 25us penalty per |
| * write access. |
| */ |
| static void nw_en_write(void) |
| { |
| unsigned long flags; |
| |
| /* |
| * we want to write a bit pattern XXX1 to Xilinx to enable |
| * the write gate, which will be open for about the next 2ms. |
| */ |
| spin_lock_irqsave(&nw_gpio_lock, flags); |
| nw_cpld_modify(CPLD_FLASH_WR_ENABLE, CPLD_FLASH_WR_ENABLE); |
| spin_unlock_irqrestore(&nw_gpio_lock, flags); |
| |
| /* |
| * let the ISA bus to catch on... |
| */ |
| udelay(25); |
| } |
| #else |
| #define nw_en_write() do { } while (0) |
| #endif |
| |
| static map_word dc21285_read8(struct map_info *map, unsigned long ofs) |
| { |
| map_word val; |
| val.x[0] = *(uint8_t*)(map->virt + ofs); |
| return val; |
| } |
| |
| static map_word dc21285_read16(struct map_info *map, unsigned long ofs) |
| { |
| map_word val; |
| val.x[0] = *(uint16_t*)(map->virt + ofs); |
| return val; |
| } |
| |
| static map_word dc21285_read32(struct map_info *map, unsigned long ofs) |
| { |
| map_word val; |
| val.x[0] = *(uint32_t*)(map->virt + ofs); |
| return val; |
| } |
| |
| static void dc21285_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) |
| { |
| memcpy(to, (void*)(map->virt + from), len); |
| } |
| |
| static void dc21285_write8(struct map_info *map, const map_word d, unsigned long adr) |
| { |
| if (machine_is_netwinder()) |
| nw_en_write(); |
| *CSR_ROMWRITEREG = adr & 3; |
| adr &= ~3; |
| *(uint8_t*)(map->virt + adr) = d.x[0]; |
| } |
| |
| static void dc21285_write16(struct map_info *map, const map_word d, unsigned long adr) |
| { |
| if (machine_is_netwinder()) |
| nw_en_write(); |
| *CSR_ROMWRITEREG = adr & 3; |
| adr &= ~3; |
| *(uint16_t*)(map->virt + adr) = d.x[0]; |
| } |
| |
| static void dc21285_write32(struct map_info *map, const map_word d, unsigned long adr) |
| { |
| if (machine_is_netwinder()) |
| nw_en_write(); |
| *(uint32_t*)(map->virt + adr) = d.x[0]; |
| } |
| |
| static void dc21285_copy_to_32(struct map_info *map, unsigned long to, const void *from, ssize_t len) |
| { |
| while (len > 0) { |
| map_word d; |
| d.x[0] = *((uint32_t*)from); |
| dc21285_write32(map, d, to); |
| from += 4; |
| to += 4; |
| len -= 4; |
| } |
| } |
| |
| static void dc21285_copy_to_16(struct map_info *map, unsigned long to, const void *from, ssize_t len) |
| { |
| while (len > 0) { |
| map_word d; |
| d.x[0] = *((uint16_t*)from); |
| dc21285_write16(map, d, to); |
| from += 2; |
| to += 2; |
| len -= 2; |
| } |
| } |
| |
| static void dc21285_copy_to_8(struct map_info *map, unsigned long to, const void *from, ssize_t len) |
| { |
| map_word d; |
| d.x[0] = *((uint8_t*)from); |
| dc21285_write8(map, d, to); |
| from++; |
| to++; |
| len--; |
| } |
| |
| static struct map_info dc21285_map = { |
| .name = "DC21285 flash", |
| .phys = NO_XIP, |
| .size = 16*1024*1024, |
| .copy_from = dc21285_copy_from, |
| }; |
| |
| /* Partition stuff */ |
| static const char * const probes[] = { "RedBoot", "cmdlinepart", NULL }; |
| |
| static int __init init_dc21285(void) |
| { |
| /* Determine bankwidth */ |
| switch (*CSR_SA110_CNTL & (3<<14)) { |
| case SA110_CNTL_ROMWIDTH_8: |
| dc21285_map.bankwidth = 1; |
| dc21285_map.read = dc21285_read8; |
| dc21285_map.write = dc21285_write8; |
| dc21285_map.copy_to = dc21285_copy_to_8; |
| break; |
| case SA110_CNTL_ROMWIDTH_16: |
| dc21285_map.bankwidth = 2; |
| dc21285_map.read = dc21285_read16; |
| dc21285_map.write = dc21285_write16; |
| dc21285_map.copy_to = dc21285_copy_to_16; |
| break; |
| case SA110_CNTL_ROMWIDTH_32: |
| dc21285_map.bankwidth = 4; |
| dc21285_map.read = dc21285_read32; |
| dc21285_map.write = dc21285_write32; |
| dc21285_map.copy_to = dc21285_copy_to_32; |
| break; |
| default: |
| printk (KERN_ERR "DC21285 flash: undefined bankwidth\n"); |
| return -ENXIO; |
| } |
| printk (KERN_NOTICE "DC21285 flash support (%d-bit bankwidth)\n", |
| dc21285_map.bankwidth*8); |
| |
| /* Let's map the flash area */ |
| dc21285_map.virt = ioremap(DC21285_FLASH, 16*1024*1024); |
| if (!dc21285_map.virt) { |
| printk("Failed to ioremap\n"); |
| return -EIO; |
| } |
| |
| if (machine_is_ebsa285()) { |
| dc21285_mtd = do_map_probe("cfi_probe", &dc21285_map); |
| } else { |
| dc21285_mtd = do_map_probe("jedec_probe", &dc21285_map); |
| } |
| |
| if (!dc21285_mtd) { |
| iounmap(dc21285_map.virt); |
| return -ENXIO; |
| } |
| |
| dc21285_mtd->owner = THIS_MODULE; |
| |
| mtd_device_parse_register(dc21285_mtd, probes, NULL, NULL, 0); |
| |
| if(machine_is_ebsa285()) { |
| /* |
| * Flash timing is determined with bits 19-16 of the |
| * CSR_SA110_CNTL. The value is the number of wait cycles, or |
| * 0 for 16 cycles (the default). Cycles are 20 ns. |
| * Here we use 7 for 140 ns flash chips. |
| */ |
| /* access time */ |
| *CSR_SA110_CNTL = ((*CSR_SA110_CNTL & ~0x000f0000) | (7 << 16)); |
| /* burst time */ |
| *CSR_SA110_CNTL = ((*CSR_SA110_CNTL & ~0x00f00000) | (7 << 20)); |
| /* tristate time */ |
| *CSR_SA110_CNTL = ((*CSR_SA110_CNTL & ~0x0f000000) | (7 << 24)); |
| } |
| |
| return 0; |
| } |
| |
| static void __exit cleanup_dc21285(void) |
| { |
| mtd_device_unregister(dc21285_mtd); |
| map_destroy(dc21285_mtd); |
| iounmap(dc21285_map.virt); |
| } |
| |
| module_init(init_dc21285); |
| module_exit(cleanup_dc21285); |
| |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Nicolas Pitre <nico@fluxnic.net>"); |
| MODULE_DESCRIPTION("MTD map driver for DC21285 boards"); |