blob: cd2047af96db218c6775a20e87af93f43bf33301 [file] [log] [blame]
/*******************************************************************************
*
* Module Name: utstring - Common functions for strings and characters
*
******************************************************************************/
/*
* Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <acpi/acpi.h>
#include "accommon.h"
#include "acnamesp.h"
#define _COMPONENT ACPI_UTILITIES
ACPI_MODULE_NAME("utstring")
/*
* Non-ANSI C library functions - strlwr, strupr, stricmp, and a 64-bit
* version of strtoul.
*/
#ifdef ACPI_ASL_COMPILER
/*******************************************************************************
*
* FUNCTION: acpi_ut_strlwr (strlwr)
*
* PARAMETERS: src_string - The source string to convert
*
* RETURN: None
*
* DESCRIPTION: Convert string to lowercase
*
* NOTE: This is not a POSIX function, so it appears here, not in utclib.c
*
******************************************************************************/
void acpi_ut_strlwr(char *src_string)
{
char *string;
ACPI_FUNCTION_ENTRY();
if (!src_string) {
return;
}
/* Walk entire string, lowercasing the letters */
for (string = src_string; *string; string++) {
*string = (char)ACPI_TOLOWER(*string);
}
return;
}
/******************************************************************************
*
* FUNCTION: acpi_ut_stricmp (stricmp)
*
* PARAMETERS: string1 - first string to compare
* string2 - second string to compare
*
* RETURN: int that signifies string relationship. Zero means strings
* are equal.
*
* DESCRIPTION: Implementation of the non-ANSI stricmp function (compare
* strings with no case sensitivity)
*
******************************************************************************/
int acpi_ut_stricmp(char *string1, char *string2)
{
int c1;
int c2;
do {
c1 = tolower((int)*string1);
c2 = tolower((int)*string2);
string1++;
string2++;
}
while ((c1 == c2) && (c1));
return (c1 - c2);
}
#endif
/*******************************************************************************
*
* FUNCTION: acpi_ut_strupr (strupr)
*
* PARAMETERS: src_string - The source string to convert
*
* RETURN: None
*
* DESCRIPTION: Convert string to uppercase
*
* NOTE: This is not a POSIX function, so it appears here, not in utclib.c
*
******************************************************************************/
void acpi_ut_strupr(char *src_string)
{
char *string;
ACPI_FUNCTION_ENTRY();
if (!src_string) {
return;
}
/* Walk entire string, uppercasing the letters */
for (string = src_string; *string; string++) {
*string = (char)ACPI_TOUPPER(*string);
}
return;
}
/*******************************************************************************
*
* FUNCTION: acpi_ut_strtoul64
*
* PARAMETERS: string - Null terminated string
* base - Radix of the string: 16 or ACPI_ANY_BASE;
* ACPI_ANY_BASE means 'in behalf of to_integer'
* ret_integer - Where the converted integer is returned
*
* RETURN: Status and Converted value
*
* DESCRIPTION: Convert a string into an unsigned value. Performs either a
* 32-bit or 64-bit conversion, depending on the current mode
* of the interpreter.
* NOTE: Does not support Octal strings, not needed.
*
******************************************************************************/
acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 *ret_integer)
{
u32 this_digit = 0;
u64 return_value = 0;
u64 quotient;
u64 dividend;
u32 to_integer_op = (base == ACPI_ANY_BASE);
u32 mode32 = (acpi_gbl_integer_byte_width == 4);
u8 valid_digits = 0;
u8 sign_of0x = 0;
u8 term = 0;
ACPI_FUNCTION_TRACE_STR(ut_stroul64, string);
switch (base) {
case ACPI_ANY_BASE:
case 16:
break;
default:
/* Invalid Base */
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
if (!string) {
goto error_exit;
}
/* Skip over any white space in the buffer */
while ((*string) && (ACPI_IS_SPACE(*string) || *string == '\t')) {
string++;
}
if (to_integer_op) {
/*
* Base equal to ACPI_ANY_BASE means 'ToInteger operation case'.
* We need to determine if it is decimal or hexadecimal.
*/
if ((*string == '0') && (ACPI_TOLOWER(*(string + 1)) == 'x')) {
sign_of0x = 1;
base = 16;
/* Skip over the leading '0x' */
string += 2;
} else {
base = 10;
}
}
/* Any string left? Check that '0x' is not followed by white space. */
if (!(*string) || ACPI_IS_SPACE(*string) || *string == '\t') {
if (to_integer_op) {
goto error_exit;
} else {
goto all_done;
}
}
/*
* Perform a 32-bit or 64-bit conversion, depending upon the current
* execution mode of the interpreter
*/
dividend = (mode32) ? ACPI_UINT32_MAX : ACPI_UINT64_MAX;
/* Main loop: convert the string to a 32- or 64-bit integer */
while (*string) {
if (ACPI_IS_DIGIT(*string)) {
/* Convert ASCII 0-9 to Decimal value */
this_digit = ((u8)*string) - '0';
} else if (base == 10) {
/* Digit is out of range; possible in to_integer case only */
term = 1;
} else {
this_digit = (u8)ACPI_TOUPPER(*string);
if (ACPI_IS_XDIGIT((char)this_digit)) {
/* Convert ASCII Hex char to value */
this_digit = this_digit - 'A' + 10;
} else {
term = 1;
}
}
if (term) {
if (to_integer_op) {
goto error_exit;
} else {
break;
}
} else if ((valid_digits == 0) && (this_digit == 0)
&& !sign_of0x) {
/* Skip zeros */
string++;
continue;
}
valid_digits++;
if (sign_of0x
&& ((valid_digits > 16)
|| ((valid_digits > 8) && mode32))) {
/*
* This is to_integer operation case.
* No any restrictions for string-to-integer conversion,
* see ACPI spec.
*/
goto error_exit;
}
/* Divide the digit into the correct position */
(void)acpi_ut_short_divide((dividend - (u64)this_digit),
base, &quotient, NULL);
if (return_value > quotient) {
if (to_integer_op) {
goto error_exit;
} else {
break;
}
}
return_value *= base;
return_value += this_digit;
string++;
}
/* All done, normal exit */
all_done:
ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Converted value: %8.8X%8.8X\n",
ACPI_FORMAT_UINT64(return_value)));
*ret_integer = return_value;
return_ACPI_STATUS(AE_OK);
error_exit:
/* Base was set/validated above */
if (base == 10) {
return_ACPI_STATUS(AE_BAD_DECIMAL_CONSTANT);
} else {
return_ACPI_STATUS(AE_BAD_HEX_CONSTANT);
}
}
/*******************************************************************************
*
* FUNCTION: acpi_ut_print_string
*
* PARAMETERS: string - Null terminated ASCII string
* max_length - Maximum output length. Used to constrain the
* length of strings during debug output only.
*
* RETURN: None
*
* DESCRIPTION: Dump an ASCII string with support for ACPI-defined escape
* sequences.
*
******************************************************************************/
void acpi_ut_print_string(char *string, u16 max_length)
{
u32 i;
if (!string) {
acpi_os_printf("<\"NULL STRING PTR\">");
return;
}
acpi_os_printf("\"");
for (i = 0; (i < max_length) && string[i]; i++) {
/* Escape sequences */
switch (string[i]) {
case 0x07:
acpi_os_printf("\\a"); /* BELL */
break;
case 0x08:
acpi_os_printf("\\b"); /* BACKSPACE */
break;
case 0x0C:
acpi_os_printf("\\f"); /* FORMFEED */
break;
case 0x0A:
acpi_os_printf("\\n"); /* LINEFEED */
break;
case 0x0D:
acpi_os_printf("\\r"); /* CARRIAGE RETURN */
break;
case 0x09:
acpi_os_printf("\\t"); /* HORIZONTAL TAB */
break;
case 0x0B:
acpi_os_printf("\\v"); /* VERTICAL TAB */
break;
case '\'': /* Single Quote */
case '\"': /* Double Quote */
case '\\': /* Backslash */
acpi_os_printf("\\%c", (int)string[i]);
break;
default:
/* Check for printable character or hex escape */
if (ACPI_IS_PRINT(string[i])) {
/* This is a normal character */
acpi_os_printf("%c", (int)string[i]);
} else {
/* All others will be Hex escapes */
acpi_os_printf("\\x%2.2X", (s32) string[i]);
}
break;
}
}
acpi_os_printf("\"");
if (i == max_length && string[i]) {
acpi_os_printf("...");
}
}
/*******************************************************************************
*
* FUNCTION: acpi_ut_valid_acpi_char
*
* PARAMETERS: char - The character to be examined
* position - Byte position (0-3)
*
* RETURN: TRUE if the character is valid, FALSE otherwise
*
* DESCRIPTION: Check for a valid ACPI character. Must be one of:
* 1) Upper case alpha
* 2) numeric
* 3) underscore
*
* We allow a '!' as the last character because of the ASF! table
*
******************************************************************************/
u8 acpi_ut_valid_acpi_char(char character, u32 position)
{
if (!((character >= 'A' && character <= 'Z') ||
(character >= '0' && character <= '9') || (character == '_'))) {
/* Allow a '!' in the last position */
if (character == '!' && position == 3) {
return (TRUE);
}
return (FALSE);
}
return (TRUE);
}
/*******************************************************************************
*
* FUNCTION: acpi_ut_valid_acpi_name
*
* PARAMETERS: name - The name to be examined. Does not have to
* be NULL terminated string.
*
* RETURN: TRUE if the name is valid, FALSE otherwise
*
* DESCRIPTION: Check for a valid ACPI name. Each character must be one of:
* 1) Upper case alpha
* 2) numeric
* 3) underscore
*
******************************************************************************/
u8 acpi_ut_valid_acpi_name(char *name)
{
u32 i;
ACPI_FUNCTION_ENTRY();
for (i = 0; i < ACPI_NAME_SIZE; i++) {
if (!acpi_ut_valid_acpi_char(name[i], i)) {
return (FALSE);
}
}
return (TRUE);
}
/*******************************************************************************
*
* FUNCTION: acpi_ut_repair_name
*
* PARAMETERS: name - The ACPI name to be repaired
*
* RETURN: Repaired version of the name
*
* DESCRIPTION: Repair an ACPI name: Change invalid characters to '*' and
* return the new name. NOTE: the Name parameter must reside in
* read/write memory, cannot be a const.
*
* An ACPI Name must consist of valid ACPI characters. We will repair the name
* if necessary because we don't want to abort because of this, but we want
* all namespace names to be printable. A warning message is appropriate.
*
* This issue came up because there are in fact machines that exhibit
* this problem, and we want to be able to enable ACPI support for them,
* even though there are a few bad names.
*
******************************************************************************/
void acpi_ut_repair_name(char *name)
{
u32 i;
u8 found_bad_char = FALSE;
u32 original_name;
ACPI_FUNCTION_NAME(ut_repair_name);
ACPI_MOVE_NAME(&original_name, name);
/* Check each character in the name */
for (i = 0; i < ACPI_NAME_SIZE; i++) {
if (acpi_ut_valid_acpi_char(name[i], i)) {
continue;
}
/*
* Replace a bad character with something printable, yet technically
* still invalid. This prevents any collisions with existing "good"
* names in the namespace.
*/
name[i] = '*';
found_bad_char = TRUE;
}
if (found_bad_char) {
/* Report warning only if in strict mode or debug mode */
if (!acpi_gbl_enable_interpreter_slack) {
ACPI_WARNING((AE_INFO,
"Invalid character(s) in name (0x%.8X), repaired: [%4.4s]",
original_name, name));
} else {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Invalid character(s) in name (0x%.8X), repaired: [%4.4s]",
original_name, name));
}
}
}
#if defined ACPI_ASL_COMPILER || defined ACPI_EXEC_APP
/*******************************************************************************
*
* FUNCTION: ut_convert_backslashes
*
* PARAMETERS: pathname - File pathname string to be converted
*
* RETURN: Modifies the input Pathname
*
* DESCRIPTION: Convert all backslashes (0x5C) to forward slashes (0x2F) within
* the entire input file pathname string.
*
******************************************************************************/
void ut_convert_backslashes(char *pathname)
{
if (!pathname) {
return;
}
while (*pathname) {
if (*pathname == '\\') {
*pathname = '/';
}
pathname++;
}
}
#endif
#if defined (ACPI_DEBUGGER) || defined (ACPI_APPLICATION)
/*******************************************************************************
*
* FUNCTION: acpi_ut_safe_strcpy, acpi_ut_safe_strcat, acpi_ut_safe_strncat
*
* PARAMETERS: Adds a "DestSize" parameter to each of the standard string
* functions. This is the size of the Destination buffer.
*
* RETURN: TRUE if the operation would overflow the destination buffer.
*
* DESCRIPTION: Safe versions of standard Clib string functions. Ensure that
* the result of the operation will not overflow the output string
* buffer.
*
* NOTE: These functions are typically only helpful for processing
* user input and command lines. For most ACPICA code, the
* required buffer length is precisely calculated before buffer
* allocation, so the use of these functions is unnecessary.
*
******************************************************************************/
u8 acpi_ut_safe_strcpy(char *dest, acpi_size dest_size, char *source)
{
if (ACPI_STRLEN(source) >= dest_size) {
return (TRUE);
}
ACPI_STRCPY(dest, source);
return (FALSE);
}
u8 acpi_ut_safe_strcat(char *dest, acpi_size dest_size, char *source)
{
if ((ACPI_STRLEN(dest) + ACPI_STRLEN(source)) >= dest_size) {
return (TRUE);
}
ACPI_STRCAT(dest, source);
return (FALSE);
}
u8
acpi_ut_safe_strncat(char *dest,
acpi_size dest_size,
char *source, acpi_size max_transfer_length)
{
acpi_size actual_transfer_length;
actual_transfer_length =
ACPI_MIN(max_transfer_length, ACPI_STRLEN(source));
if ((ACPI_STRLEN(dest) + actual_transfer_length) >= dest_size) {
return (TRUE);
}
ACPI_STRNCAT(dest, source, max_transfer_length);
return (FALSE);
}
#endif