| /* |
| * Mac80211 power management API for ST-Ericsson CW1200 drivers |
| * |
| * Copyright (c) 2011, ST-Ericsson |
| * Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/if_ether.h> |
| #include "cw1200.h" |
| #include "pm.h" |
| #include "sta.h" |
| #include "bh.h" |
| #include "hwbus.h" |
| |
| #define CW1200_BEACON_SKIPPING_MULTIPLIER 3 |
| |
| struct cw1200_udp_port_filter { |
| struct wsm_udp_port_filter_hdr hdr; |
| /* Up to 4 filters are allowed. */ |
| struct wsm_udp_port_filter filters[WSM_MAX_FILTER_ELEMENTS]; |
| } __packed; |
| |
| struct cw1200_ether_type_filter { |
| struct wsm_ether_type_filter_hdr hdr; |
| /* Up to 4 filters are allowed. */ |
| struct wsm_ether_type_filter filters[WSM_MAX_FILTER_ELEMENTS]; |
| } __packed; |
| |
| static struct cw1200_udp_port_filter cw1200_udp_port_filter_on = { |
| .hdr.num = 2, |
| .filters = { |
| [0] = { |
| .action = WSM_FILTER_ACTION_FILTER_OUT, |
| .type = WSM_FILTER_PORT_TYPE_DST, |
| .port = __cpu_to_le16(67), /* DHCP Bootps */ |
| }, |
| [1] = { |
| .action = WSM_FILTER_ACTION_FILTER_OUT, |
| .type = WSM_FILTER_PORT_TYPE_DST, |
| .port = __cpu_to_le16(68), /* DHCP Bootpc */ |
| }, |
| } |
| }; |
| |
| static struct wsm_udp_port_filter_hdr cw1200_udp_port_filter_off = { |
| .num = 0, |
| }; |
| |
| #ifndef ETH_P_WAPI |
| #define ETH_P_WAPI 0x88B4 |
| #endif |
| |
| static struct cw1200_ether_type_filter cw1200_ether_type_filter_on = { |
| .hdr.num = 4, |
| .filters = { |
| [0] = { |
| .action = WSM_FILTER_ACTION_FILTER_IN, |
| .type = __cpu_to_le16(ETH_P_IP), |
| }, |
| [1] = { |
| .action = WSM_FILTER_ACTION_FILTER_IN, |
| .type = __cpu_to_le16(ETH_P_PAE), |
| }, |
| [2] = { |
| .action = WSM_FILTER_ACTION_FILTER_IN, |
| .type = __cpu_to_le16(ETH_P_WAPI), |
| }, |
| [3] = { |
| .action = WSM_FILTER_ACTION_FILTER_IN, |
| .type = __cpu_to_le16(ETH_P_ARP), |
| }, |
| }, |
| }; |
| |
| static struct wsm_ether_type_filter_hdr cw1200_ether_type_filter_off = { |
| .num = 0, |
| }; |
| |
| /* private */ |
| struct cw1200_suspend_state { |
| unsigned long bss_loss_tmo; |
| unsigned long join_tmo; |
| unsigned long direct_probe; |
| unsigned long link_id_gc; |
| bool beacon_skipping; |
| u8 prev_ps_mode; |
| }; |
| |
| static void cw1200_pm_stay_awake_tmo(unsigned long arg) |
| { |
| /* XXX what's the point of this ? */ |
| } |
| |
| int cw1200_pm_init(struct cw1200_pm_state *pm, |
| struct cw1200_common *priv) |
| { |
| spin_lock_init(&pm->lock); |
| |
| setup_timer(&pm->stay_awake, cw1200_pm_stay_awake_tmo, |
| (unsigned long)pm); |
| |
| return 0; |
| } |
| |
| void cw1200_pm_deinit(struct cw1200_pm_state *pm) |
| { |
| del_timer_sync(&pm->stay_awake); |
| } |
| |
| void cw1200_pm_stay_awake(struct cw1200_pm_state *pm, |
| unsigned long tmo) |
| { |
| long cur_tmo; |
| spin_lock_bh(&pm->lock); |
| cur_tmo = pm->stay_awake.expires - jiffies; |
| if (!timer_pending(&pm->stay_awake) || cur_tmo < (long)tmo) |
| mod_timer(&pm->stay_awake, jiffies + tmo); |
| spin_unlock_bh(&pm->lock); |
| } |
| |
| static long cw1200_suspend_work(struct delayed_work *work) |
| { |
| int ret = cancel_delayed_work(work); |
| long tmo; |
| if (ret > 0) { |
| /* Timer is pending */ |
| tmo = work->timer.expires - jiffies; |
| if (tmo < 0) |
| tmo = 0; |
| } else { |
| tmo = -1; |
| } |
| return tmo; |
| } |
| |
| static int cw1200_resume_work(struct cw1200_common *priv, |
| struct delayed_work *work, |
| unsigned long tmo) |
| { |
| if ((long)tmo < 0) |
| return 1; |
| |
| return queue_delayed_work(priv->workqueue, work, tmo); |
| } |
| |
| int cw1200_can_suspend(struct cw1200_common *priv) |
| { |
| if (atomic_read(&priv->bh_rx)) { |
| wiphy_dbg(priv->hw->wiphy, "Suspend interrupted.\n"); |
| return 0; |
| } |
| return 1; |
| } |
| EXPORT_SYMBOL_GPL(cw1200_can_suspend); |
| |
| int cw1200_wow_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan) |
| { |
| struct cw1200_common *priv = hw->priv; |
| struct cw1200_pm_state *pm_state = &priv->pm_state; |
| struct cw1200_suspend_state *state; |
| int ret; |
| |
| spin_lock_bh(&pm_state->lock); |
| ret = timer_pending(&pm_state->stay_awake); |
| spin_unlock_bh(&pm_state->lock); |
| if (ret) |
| return -EAGAIN; |
| |
| /* Do not suspend when datapath is not idle */ |
| if (priv->tx_queue_stats.num_queued) |
| return -EBUSY; |
| |
| /* Make sure there is no configuration requests in progress. */ |
| if (!mutex_trylock(&priv->conf_mutex)) |
| return -EBUSY; |
| |
| /* Ensure pending operations are done. |
| * Note also that wow_suspend must return in ~2.5sec, before |
| * watchdog is triggered. |
| */ |
| if (priv->channel_switch_in_progress) |
| goto revert1; |
| |
| /* Do not suspend when join is pending */ |
| if (priv->join_pending) |
| goto revert1; |
| |
| /* Do not suspend when scanning */ |
| if (down_trylock(&priv->scan.lock)) |
| goto revert1; |
| |
| /* Lock TX. */ |
| wsm_lock_tx_async(priv); |
| |
| /* Wait to avoid possible race with bh code. |
| * But do not wait too long... |
| */ |
| if (wait_event_timeout(priv->bh_evt_wq, |
| !priv->hw_bufs_used, HZ / 10) <= 0) |
| goto revert2; |
| |
| /* Set UDP filter */ |
| wsm_set_udp_port_filter(priv, &cw1200_udp_port_filter_on.hdr); |
| |
| /* Set ethernet frame type filter */ |
| wsm_set_ether_type_filter(priv, &cw1200_ether_type_filter_on.hdr); |
| |
| /* Allocate state */ |
| state = kzalloc(sizeof(struct cw1200_suspend_state), GFP_KERNEL); |
| if (!state) |
| goto revert3; |
| |
| /* Change to legacy PS while going to suspend */ |
| if (!priv->vif->p2p && |
| priv->join_status == CW1200_JOIN_STATUS_STA && |
| priv->powersave_mode.mode != WSM_PSM_PS) { |
| state->prev_ps_mode = priv->powersave_mode.mode; |
| priv->powersave_mode.mode = WSM_PSM_PS; |
| cw1200_set_pm(priv, &priv->powersave_mode); |
| if (wait_event_interruptible_timeout(priv->ps_mode_switch_done, |
| !priv->ps_mode_switch_in_progress, 1*HZ) <= 0) { |
| goto revert4; |
| } |
| } |
| |
| /* Store delayed work states. */ |
| state->bss_loss_tmo = |
| cw1200_suspend_work(&priv->bss_loss_work); |
| state->join_tmo = |
| cw1200_suspend_work(&priv->join_timeout); |
| state->direct_probe = |
| cw1200_suspend_work(&priv->scan.probe_work); |
| state->link_id_gc = |
| cw1200_suspend_work(&priv->link_id_gc_work); |
| |
| cancel_delayed_work_sync(&priv->clear_recent_scan_work); |
| atomic_set(&priv->recent_scan, 0); |
| |
| /* Enable beacon skipping */ |
| if (priv->join_status == CW1200_JOIN_STATUS_STA && |
| priv->join_dtim_period && |
| !priv->has_multicast_subscription) { |
| state->beacon_skipping = true; |
| wsm_set_beacon_wakeup_period(priv, |
| priv->join_dtim_period, |
| CW1200_BEACON_SKIPPING_MULTIPLIER * priv->join_dtim_period); |
| } |
| |
| /* Stop serving thread */ |
| if (cw1200_bh_suspend(priv)) |
| goto revert5; |
| |
| ret = timer_pending(&priv->mcast_timeout); |
| if (ret) |
| goto revert6; |
| |
| /* Store suspend state */ |
| pm_state->suspend_state = state; |
| |
| /* Enable IRQ wake */ |
| ret = priv->hwbus_ops->power_mgmt(priv->hwbus_priv, true); |
| if (ret) { |
| wiphy_err(priv->hw->wiphy, |
| "PM request failed: %d. WoW is disabled.\n", ret); |
| cw1200_wow_resume(hw); |
| return -EBUSY; |
| } |
| |
| /* Force resume if event is coming from the device. */ |
| if (atomic_read(&priv->bh_rx)) { |
| cw1200_wow_resume(hw); |
| return -EAGAIN; |
| } |
| |
| return 0; |
| |
| revert6: |
| WARN_ON(cw1200_bh_resume(priv)); |
| revert5: |
| cw1200_resume_work(priv, &priv->bss_loss_work, |
| state->bss_loss_tmo); |
| cw1200_resume_work(priv, &priv->join_timeout, |
| state->join_tmo); |
| cw1200_resume_work(priv, &priv->scan.probe_work, |
| state->direct_probe); |
| cw1200_resume_work(priv, &priv->link_id_gc_work, |
| state->link_id_gc); |
| revert4: |
| kfree(state); |
| revert3: |
| wsm_set_udp_port_filter(priv, &cw1200_udp_port_filter_off); |
| wsm_set_ether_type_filter(priv, &cw1200_ether_type_filter_off); |
| revert2: |
| wsm_unlock_tx(priv); |
| up(&priv->scan.lock); |
| revert1: |
| mutex_unlock(&priv->conf_mutex); |
| return -EBUSY; |
| } |
| |
| int cw1200_wow_resume(struct ieee80211_hw *hw) |
| { |
| struct cw1200_common *priv = hw->priv; |
| struct cw1200_pm_state *pm_state = &priv->pm_state; |
| struct cw1200_suspend_state *state; |
| |
| state = pm_state->suspend_state; |
| pm_state->suspend_state = NULL; |
| |
| /* Disable IRQ wake */ |
| priv->hwbus_ops->power_mgmt(priv->hwbus_priv, false); |
| |
| /* Scan.lock must be released before BH is resumed other way |
| * in case when BSS_LOST command arrived the processing of the |
| * command will be delayed. |
| */ |
| up(&priv->scan.lock); |
| |
| /* Resume BH thread */ |
| WARN_ON(cw1200_bh_resume(priv)); |
| |
| /* Restores previous PS mode */ |
| if (!priv->vif->p2p && priv->join_status == CW1200_JOIN_STATUS_STA) { |
| priv->powersave_mode.mode = state->prev_ps_mode; |
| cw1200_set_pm(priv, &priv->powersave_mode); |
| } |
| |
| if (state->beacon_skipping) { |
| wsm_set_beacon_wakeup_period(priv, priv->beacon_int * |
| priv->join_dtim_period > |
| MAX_BEACON_SKIP_TIME_MS ? 1 : |
| priv->join_dtim_period, 0); |
| state->beacon_skipping = false; |
| } |
| |
| /* Resume delayed work */ |
| cw1200_resume_work(priv, &priv->bss_loss_work, |
| state->bss_loss_tmo); |
| cw1200_resume_work(priv, &priv->join_timeout, |
| state->join_tmo); |
| cw1200_resume_work(priv, &priv->scan.probe_work, |
| state->direct_probe); |
| cw1200_resume_work(priv, &priv->link_id_gc_work, |
| state->link_id_gc); |
| |
| /* Remove UDP port filter */ |
| wsm_set_udp_port_filter(priv, &cw1200_udp_port_filter_off); |
| |
| /* Remove ethernet frame type filter */ |
| wsm_set_ether_type_filter(priv, &cw1200_ether_type_filter_off); |
| |
| /* Unlock datapath */ |
| wsm_unlock_tx(priv); |
| |
| /* Unlock configuration mutex */ |
| mutex_unlock(&priv->conf_mutex); |
| |
| /* Free memory */ |
| kfree(state); |
| |
| return 0; |
| } |