| /* |
| * EHCI-compliant USB host controller driver for NVIDIA Tegra SoCs |
| * |
| * Copyright (C) 2010 Google, Inc. |
| * Copyright (C) 2009 - 2013 NVIDIA Corporation |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/err.h> |
| #include <linux/gpio.h> |
| #include <linux/io.h> |
| #include <linux/irq.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/of_gpio.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/reset.h> |
| #include <linux/slab.h> |
| #include <linux/usb/ehci_def.h> |
| #include <linux/usb/tegra_usb_phy.h> |
| #include <linux/usb.h> |
| #include <linux/usb/hcd.h> |
| #include <linux/usb/otg.h> |
| |
| #include "ehci.h" |
| |
| #define TEGRA_USB_BASE 0xC5000000 |
| #define TEGRA_USB2_BASE 0xC5004000 |
| #define TEGRA_USB3_BASE 0xC5008000 |
| |
| #define PORT_WAKE_BITS (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E) |
| |
| #define TEGRA_USB_DMA_ALIGN 32 |
| |
| #define DRIVER_DESC "Tegra EHCI driver" |
| #define DRV_NAME "tegra-ehci" |
| |
| static struct hc_driver __read_mostly tegra_ehci_hc_driver; |
| |
| struct tegra_ehci_soc_config { |
| bool has_hostpc; |
| }; |
| |
| static int (*orig_hub_control)(struct usb_hcd *hcd, |
| u16 typeReq, u16 wValue, u16 wIndex, |
| char *buf, u16 wLength); |
| |
| struct tegra_ehci_hcd { |
| struct tegra_usb_phy *phy; |
| struct clk *clk; |
| struct reset_control *rst; |
| int port_resuming; |
| bool needs_double_reset; |
| enum tegra_usb_phy_port_speed port_speed; |
| }; |
| |
| static int tegra_ehci_internal_port_reset( |
| struct ehci_hcd *ehci, |
| u32 __iomem *portsc_reg |
| ) |
| { |
| u32 temp; |
| unsigned long flags; |
| int retval = 0; |
| int i, tries; |
| u32 saved_usbintr; |
| |
| spin_lock_irqsave(&ehci->lock, flags); |
| saved_usbintr = ehci_readl(ehci, &ehci->regs->intr_enable); |
| /* disable USB interrupt */ |
| ehci_writel(ehci, 0, &ehci->regs->intr_enable); |
| spin_unlock_irqrestore(&ehci->lock, flags); |
| |
| /* |
| * Here we have to do Port Reset at most twice for |
| * Port Enable bit to be set. |
| */ |
| for (i = 0; i < 2; i++) { |
| temp = ehci_readl(ehci, portsc_reg); |
| temp |= PORT_RESET; |
| ehci_writel(ehci, temp, portsc_reg); |
| mdelay(10); |
| temp &= ~PORT_RESET; |
| ehci_writel(ehci, temp, portsc_reg); |
| mdelay(1); |
| tries = 100; |
| do { |
| mdelay(1); |
| /* |
| * Up to this point, Port Enable bit is |
| * expected to be set after 2 ms waiting. |
| * USB1 usually takes extra 45 ms, for safety, |
| * we take 100 ms as timeout. |
| */ |
| temp = ehci_readl(ehci, portsc_reg); |
| } while (!(temp & PORT_PE) && tries--); |
| if (temp & PORT_PE) |
| break; |
| } |
| if (i == 2) |
| retval = -ETIMEDOUT; |
| |
| /* |
| * Clear Connect Status Change bit if it's set. |
| * We can't clear PORT_PEC. It will also cause PORT_PE to be cleared. |
| */ |
| if (temp & PORT_CSC) |
| ehci_writel(ehci, PORT_CSC, portsc_reg); |
| |
| /* |
| * Write to clear any interrupt status bits that might be set |
| * during port reset. |
| */ |
| temp = ehci_readl(ehci, &ehci->regs->status); |
| ehci_writel(ehci, temp, &ehci->regs->status); |
| |
| /* restore original interrupt enable bits */ |
| ehci_writel(ehci, saved_usbintr, &ehci->regs->intr_enable); |
| return retval; |
| } |
| |
| static int tegra_ehci_hub_control( |
| struct usb_hcd *hcd, |
| u16 typeReq, |
| u16 wValue, |
| u16 wIndex, |
| char *buf, |
| u16 wLength |
| ) |
| { |
| struct ehci_hcd *ehci = hcd_to_ehci(hcd); |
| struct tegra_ehci_hcd *tegra = (struct tegra_ehci_hcd *)ehci->priv; |
| u32 __iomem *status_reg; |
| u32 temp; |
| unsigned long flags; |
| int retval = 0; |
| |
| status_reg = &ehci->regs->port_status[(wIndex & 0xff) - 1]; |
| |
| spin_lock_irqsave(&ehci->lock, flags); |
| |
| if (typeReq == GetPortStatus) { |
| temp = ehci_readl(ehci, status_reg); |
| if (tegra->port_resuming && !(temp & PORT_SUSPEND)) { |
| /* Resume completed, re-enable disconnect detection */ |
| tegra->port_resuming = 0; |
| tegra_usb_phy_postresume(hcd->phy); |
| } |
| } |
| |
| else if (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_SUSPEND) { |
| temp = ehci_readl(ehci, status_reg); |
| if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) { |
| retval = -EPIPE; |
| goto done; |
| } |
| |
| temp &= ~(PORT_RWC_BITS | PORT_WKCONN_E); |
| temp |= PORT_WKDISC_E | PORT_WKOC_E; |
| ehci_writel(ehci, temp | PORT_SUSPEND, status_reg); |
| |
| /* |
| * If a transaction is in progress, there may be a delay in |
| * suspending the port. Poll until the port is suspended. |
| */ |
| if (ehci_handshake(ehci, status_reg, PORT_SUSPEND, |
| PORT_SUSPEND, 5000)) |
| pr_err("%s: timeout waiting for SUSPEND\n", __func__); |
| |
| set_bit((wIndex & 0xff) - 1, &ehci->suspended_ports); |
| goto done; |
| } |
| |
| /* For USB1 port we need to issue Port Reset twice internally */ |
| if (tegra->needs_double_reset && |
| (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_RESET)) { |
| spin_unlock_irqrestore(&ehci->lock, flags); |
| return tegra_ehci_internal_port_reset(ehci, status_reg); |
| } |
| |
| /* |
| * Tegra host controller will time the resume operation to clear the bit |
| * when the port control state switches to HS or FS Idle. This behavior |
| * is different from EHCI where the host controller driver is required |
| * to set this bit to a zero after the resume duration is timed in the |
| * driver. |
| */ |
| else if (typeReq == ClearPortFeature && |
| wValue == USB_PORT_FEAT_SUSPEND) { |
| temp = ehci_readl(ehci, status_reg); |
| if ((temp & PORT_RESET) || !(temp & PORT_PE)) { |
| retval = -EPIPE; |
| goto done; |
| } |
| |
| if (!(temp & PORT_SUSPEND)) |
| goto done; |
| |
| /* Disable disconnect detection during port resume */ |
| tegra_usb_phy_preresume(hcd->phy); |
| |
| ehci->reset_done[wIndex-1] = jiffies + msecs_to_jiffies(25); |
| |
| temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS); |
| /* start resume signalling */ |
| ehci_writel(ehci, temp | PORT_RESUME, status_reg); |
| set_bit(wIndex-1, &ehci->resuming_ports); |
| |
| spin_unlock_irqrestore(&ehci->lock, flags); |
| msleep(20); |
| spin_lock_irqsave(&ehci->lock, flags); |
| |
| /* Poll until the controller clears RESUME and SUSPEND */ |
| if (ehci_handshake(ehci, status_reg, PORT_RESUME, 0, 2000)) |
| pr_err("%s: timeout waiting for RESUME\n", __func__); |
| if (ehci_handshake(ehci, status_reg, PORT_SUSPEND, 0, 2000)) |
| pr_err("%s: timeout waiting for SUSPEND\n", __func__); |
| |
| ehci->reset_done[wIndex-1] = 0; |
| clear_bit(wIndex-1, &ehci->resuming_ports); |
| |
| tegra->port_resuming = 1; |
| goto done; |
| } |
| |
| spin_unlock_irqrestore(&ehci->lock, flags); |
| |
| /* Handle the hub control events here */ |
| return orig_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); |
| |
| done: |
| spin_unlock_irqrestore(&ehci->lock, flags); |
| return retval; |
| } |
| |
| struct dma_aligned_buffer { |
| void *kmalloc_ptr; |
| void *old_xfer_buffer; |
| u8 data[0]; |
| }; |
| |
| static void free_dma_aligned_buffer(struct urb *urb) |
| { |
| struct dma_aligned_buffer *temp; |
| |
| if (!(urb->transfer_flags & URB_ALIGNED_TEMP_BUFFER)) |
| return; |
| |
| temp = container_of(urb->transfer_buffer, |
| struct dma_aligned_buffer, data); |
| |
| if (usb_urb_dir_in(urb)) |
| memcpy(temp->old_xfer_buffer, temp->data, |
| urb->transfer_buffer_length); |
| urb->transfer_buffer = temp->old_xfer_buffer; |
| kfree(temp->kmalloc_ptr); |
| |
| urb->transfer_flags &= ~URB_ALIGNED_TEMP_BUFFER; |
| } |
| |
| static int alloc_dma_aligned_buffer(struct urb *urb, gfp_t mem_flags) |
| { |
| struct dma_aligned_buffer *temp, *kmalloc_ptr; |
| size_t kmalloc_size; |
| |
| if (urb->num_sgs || urb->sg || |
| urb->transfer_buffer_length == 0 || |
| !((uintptr_t)urb->transfer_buffer & (TEGRA_USB_DMA_ALIGN - 1))) |
| return 0; |
| |
| /* Allocate a buffer with enough padding for alignment */ |
| kmalloc_size = urb->transfer_buffer_length + |
| sizeof(struct dma_aligned_buffer) + TEGRA_USB_DMA_ALIGN - 1; |
| |
| kmalloc_ptr = kmalloc(kmalloc_size, mem_flags); |
| if (!kmalloc_ptr) |
| return -ENOMEM; |
| |
| /* Position our struct dma_aligned_buffer such that data is aligned */ |
| temp = PTR_ALIGN(kmalloc_ptr + 1, TEGRA_USB_DMA_ALIGN) - 1; |
| temp->kmalloc_ptr = kmalloc_ptr; |
| temp->old_xfer_buffer = urb->transfer_buffer; |
| if (usb_urb_dir_out(urb)) |
| memcpy(temp->data, urb->transfer_buffer, |
| urb->transfer_buffer_length); |
| urb->transfer_buffer = temp->data; |
| |
| urb->transfer_flags |= URB_ALIGNED_TEMP_BUFFER; |
| |
| return 0; |
| } |
| |
| static int tegra_ehci_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, |
| gfp_t mem_flags) |
| { |
| int ret; |
| |
| ret = alloc_dma_aligned_buffer(urb, mem_flags); |
| if (ret) |
| return ret; |
| |
| ret = usb_hcd_map_urb_for_dma(hcd, urb, mem_flags); |
| if (ret) |
| free_dma_aligned_buffer(urb); |
| |
| return ret; |
| } |
| |
| static void tegra_ehci_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb) |
| { |
| usb_hcd_unmap_urb_for_dma(hcd, urb); |
| free_dma_aligned_buffer(urb); |
| } |
| |
| static const struct tegra_ehci_soc_config tegra30_soc_config = { |
| .has_hostpc = true, |
| }; |
| |
| static const struct tegra_ehci_soc_config tegra20_soc_config = { |
| .has_hostpc = false, |
| }; |
| |
| static struct of_device_id tegra_ehci_of_match[] = { |
| { .compatible = "nvidia,tegra30-ehci", .data = &tegra30_soc_config }, |
| { .compatible = "nvidia,tegra20-ehci", .data = &tegra20_soc_config }, |
| { }, |
| }; |
| |
| static int tegra_ehci_probe(struct platform_device *pdev) |
| { |
| const struct of_device_id *match; |
| const struct tegra_ehci_soc_config *soc_config; |
| struct resource *res; |
| struct usb_hcd *hcd; |
| struct ehci_hcd *ehci; |
| struct tegra_ehci_hcd *tegra; |
| int err = 0; |
| int irq; |
| struct usb_phy *u_phy; |
| |
| match = of_match_device(tegra_ehci_of_match, &pdev->dev); |
| if (!match) { |
| dev_err(&pdev->dev, "Error: No device match found\n"); |
| return -ENODEV; |
| } |
| soc_config = match->data; |
| |
| /* Right now device-tree probed devices don't get dma_mask set. |
| * Since shared usb code relies on it, set it here for now. |
| * Once we have dma capability bindings this can go away. |
| */ |
| err = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); |
| if (err) |
| return err; |
| |
| hcd = usb_create_hcd(&tegra_ehci_hc_driver, &pdev->dev, |
| dev_name(&pdev->dev)); |
| if (!hcd) { |
| dev_err(&pdev->dev, "Unable to create HCD\n"); |
| return -ENOMEM; |
| } |
| platform_set_drvdata(pdev, hcd); |
| ehci = hcd_to_ehci(hcd); |
| tegra = (struct tegra_ehci_hcd *)ehci->priv; |
| |
| hcd->has_tt = 1; |
| |
| tegra->clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(tegra->clk)) { |
| dev_err(&pdev->dev, "Can't get ehci clock\n"); |
| err = PTR_ERR(tegra->clk); |
| goto cleanup_hcd_create; |
| } |
| |
| tegra->rst = devm_reset_control_get(&pdev->dev, "usb"); |
| if (IS_ERR(tegra->rst)) { |
| dev_err(&pdev->dev, "Can't get ehci reset\n"); |
| err = PTR_ERR(tegra->rst); |
| goto cleanup_hcd_create; |
| } |
| |
| err = clk_prepare_enable(tegra->clk); |
| if (err) |
| goto cleanup_hcd_create; |
| |
| reset_control_assert(tegra->rst); |
| udelay(1); |
| reset_control_deassert(tegra->rst); |
| |
| u_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "nvidia,phy", 0); |
| if (IS_ERR(u_phy)) { |
| err = PTR_ERR(u_phy); |
| goto cleanup_clk_en; |
| } |
| hcd->phy = u_phy; |
| |
| tegra->needs_double_reset = of_property_read_bool(pdev->dev.of_node, |
| "nvidia,needs-double-reset"); |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) { |
| dev_err(&pdev->dev, "Failed to get I/O memory\n"); |
| err = -ENXIO; |
| goto cleanup_clk_en; |
| } |
| hcd->rsrc_start = res->start; |
| hcd->rsrc_len = resource_size(res); |
| hcd->regs = devm_ioremap(&pdev->dev, res->start, resource_size(res)); |
| if (!hcd->regs) { |
| dev_err(&pdev->dev, "Failed to remap I/O memory\n"); |
| err = -ENOMEM; |
| goto cleanup_clk_en; |
| } |
| ehci->caps = hcd->regs + 0x100; |
| ehci->has_hostpc = soc_config->has_hostpc; |
| |
| err = usb_phy_init(hcd->phy); |
| if (err) { |
| dev_err(&pdev->dev, "Failed to initialize phy\n"); |
| goto cleanup_clk_en; |
| } |
| |
| u_phy->otg = devm_kzalloc(&pdev->dev, sizeof(struct usb_otg), |
| GFP_KERNEL); |
| if (!u_phy->otg) { |
| dev_err(&pdev->dev, "Failed to alloc memory for otg\n"); |
| err = -ENOMEM; |
| goto cleanup_phy; |
| } |
| u_phy->otg->host = hcd_to_bus(hcd); |
| |
| err = usb_phy_set_suspend(hcd->phy, 0); |
| if (err) { |
| dev_err(&pdev->dev, "Failed to power on the phy\n"); |
| goto cleanup_phy; |
| } |
| |
| irq = platform_get_irq(pdev, 0); |
| if (!irq) { |
| dev_err(&pdev->dev, "Failed to get IRQ\n"); |
| err = -ENODEV; |
| goto cleanup_phy; |
| } |
| |
| otg_set_host(u_phy->otg, &hcd->self); |
| |
| err = usb_add_hcd(hcd, irq, IRQF_SHARED); |
| if (err) { |
| dev_err(&pdev->dev, "Failed to add USB HCD\n"); |
| goto cleanup_otg_set_host; |
| } |
| device_wakeup_enable(hcd->self.controller); |
| |
| return err; |
| |
| cleanup_otg_set_host: |
| otg_set_host(u_phy->otg, NULL); |
| cleanup_phy: |
| usb_phy_shutdown(hcd->phy); |
| cleanup_clk_en: |
| clk_disable_unprepare(tegra->clk); |
| cleanup_hcd_create: |
| usb_put_hcd(hcd); |
| return err; |
| } |
| |
| static int tegra_ehci_remove(struct platform_device *pdev) |
| { |
| struct usb_hcd *hcd = platform_get_drvdata(pdev); |
| struct tegra_ehci_hcd *tegra = |
| (struct tegra_ehci_hcd *)hcd_to_ehci(hcd)->priv; |
| |
| otg_set_host(hcd->phy->otg, NULL); |
| |
| usb_phy_shutdown(hcd->phy); |
| usb_remove_hcd(hcd); |
| usb_put_hcd(hcd); |
| |
| clk_disable_unprepare(tegra->clk); |
| |
| return 0; |
| } |
| |
| static void tegra_ehci_hcd_shutdown(struct platform_device *pdev) |
| { |
| struct usb_hcd *hcd = platform_get_drvdata(pdev); |
| |
| if (hcd->driver->shutdown) |
| hcd->driver->shutdown(hcd); |
| } |
| |
| static struct platform_driver tegra_ehci_driver = { |
| .probe = tegra_ehci_probe, |
| .remove = tegra_ehci_remove, |
| .shutdown = tegra_ehci_hcd_shutdown, |
| .driver = { |
| .name = DRV_NAME, |
| .of_match_table = tegra_ehci_of_match, |
| } |
| }; |
| |
| static int tegra_ehci_reset(struct usb_hcd *hcd) |
| { |
| struct ehci_hcd *ehci = hcd_to_ehci(hcd); |
| int retval; |
| int txfifothresh; |
| |
| retval = ehci_setup(hcd); |
| if (retval) |
| return retval; |
| |
| /* |
| * We should really pull this value out of tegra_ehci_soc_config, but |
| * to avoid needing access to it, make use of the fact that Tegra20 is |
| * the only one so far that needs a value of 10, and Tegra20 is the |
| * only one which doesn't set has_hostpc. |
| */ |
| txfifothresh = ehci->has_hostpc ? 0x10 : 10; |
| ehci_writel(ehci, txfifothresh << 16, &ehci->regs->txfill_tuning); |
| |
| return 0; |
| } |
| |
| static const struct ehci_driver_overrides tegra_overrides __initconst = { |
| .extra_priv_size = sizeof(struct tegra_ehci_hcd), |
| .reset = tegra_ehci_reset, |
| }; |
| |
| static int __init ehci_tegra_init(void) |
| { |
| if (usb_disabled()) |
| return -ENODEV; |
| |
| pr_info(DRV_NAME ": " DRIVER_DESC "\n"); |
| |
| ehci_init_driver(&tegra_ehci_hc_driver, &tegra_overrides); |
| |
| /* |
| * The Tegra HW has some unusual quirks, which require Tegra-specific |
| * workarounds. We override certain hc_driver functions here to |
| * achieve that. We explicitly do not enhance ehci_driver_overrides to |
| * allow this more easily, since this is an unusual case, and we don't |
| * want to encourage others to override these functions by making it |
| * too easy. |
| */ |
| |
| orig_hub_control = tegra_ehci_hc_driver.hub_control; |
| |
| tegra_ehci_hc_driver.map_urb_for_dma = tegra_ehci_map_urb_for_dma; |
| tegra_ehci_hc_driver.unmap_urb_for_dma = tegra_ehci_unmap_urb_for_dma; |
| tegra_ehci_hc_driver.hub_control = tegra_ehci_hub_control; |
| |
| return platform_driver_register(&tegra_ehci_driver); |
| } |
| module_init(ehci_tegra_init); |
| |
| static void __exit ehci_tegra_cleanup(void) |
| { |
| platform_driver_unregister(&tegra_ehci_driver); |
| } |
| module_exit(ehci_tegra_cleanup); |
| |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:" DRV_NAME); |
| MODULE_DEVICE_TABLE(of, tegra_ehci_of_match); |