| /* |
| * linux/arch/sh/boards/superh/microdev/io.c |
| * |
| * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com) |
| * Copyright (C) 2003, 2004 SuperH, Inc. |
| * Copyright (C) 2004 Paul Mundt |
| * |
| * SuperH SH4-202 MicroDev board support. |
| * |
| * May be copied or modified under the terms of the GNU General Public |
| * License. See linux/COPYING for more information. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/pci.h> |
| #include <linux/wait.h> |
| #include <asm/io.h> |
| #include <mach/microdev.h> |
| |
| /* |
| * we need to have a 'safe' address to re-direct all I/O requests |
| * that we do not explicitly wish to handle. This safe address |
| * must have the following properies: |
| * |
| * * writes are ignored (no exception) |
| * * reads are benign (no side-effects) |
| * * accesses of width 1, 2 and 4-bytes are all valid. |
| * |
| * The Processor Version Register (PVR) has these properties. |
| */ |
| #define PVR 0xff000030 /* Processor Version Register */ |
| |
| |
| #define IO_IDE2_BASE 0x170ul /* I/O base for SMSC FDC37C93xAPM IDE #2 */ |
| #define IO_IDE1_BASE 0x1f0ul /* I/O base for SMSC FDC37C93xAPM IDE #1 */ |
| #define IO_ISP1161_BASE 0x290ul /* I/O port for Philips ISP1161x USB chip */ |
| #define IO_SERIAL2_BASE 0x2f8ul /* I/O base for SMSC FDC37C93xAPM Serial #2 */ |
| #define IO_LAN91C111_BASE 0x300ul /* I/O base for SMSC LAN91C111 Ethernet chip */ |
| #define IO_IDE2_MISC 0x376ul /* I/O misc for SMSC FDC37C93xAPM IDE #2 */ |
| #define IO_SUPERIO_BASE 0x3f0ul /* I/O base for SMSC FDC37C93xAPM SuperIO chip */ |
| #define IO_IDE1_MISC 0x3f6ul /* I/O misc for SMSC FDC37C93xAPM IDE #1 */ |
| #define IO_SERIAL1_BASE 0x3f8ul /* I/O base for SMSC FDC37C93xAPM Serial #1 */ |
| |
| #define IO_ISP1161_EXTENT 0x04ul /* I/O extent for Philips ISP1161x USB chip */ |
| #define IO_LAN91C111_EXTENT 0x10ul /* I/O extent for SMSC LAN91C111 Ethernet chip */ |
| #define IO_SUPERIO_EXTENT 0x02ul /* I/O extent for SMSC FDC37C93xAPM SuperIO chip */ |
| #define IO_IDE_EXTENT 0x08ul /* I/O extent for IDE Task Register set */ |
| #define IO_SERIAL_EXTENT 0x10ul |
| |
| #define IO_LAN91C111_PHYS 0xa7500000ul /* Physical address of SMSC LAN91C111 Ethernet chip */ |
| #define IO_ISP1161_PHYS 0xa7700000ul /* Physical address of Philips ISP1161x USB chip */ |
| #define IO_SUPERIO_PHYS 0xa7800000ul /* Physical address of SMSC FDC37C93xAPM SuperIO chip */ |
| |
| /* |
| * map I/O ports to memory-mapped addresses |
| */ |
| void __iomem *microdev_ioport_map(unsigned long offset, unsigned int len) |
| { |
| unsigned long result; |
| |
| if ((offset >= IO_LAN91C111_BASE) && |
| (offset < IO_LAN91C111_BASE + IO_LAN91C111_EXTENT)) { |
| /* |
| * SMSC LAN91C111 Ethernet chip |
| */ |
| result = IO_LAN91C111_PHYS + offset - IO_LAN91C111_BASE; |
| } else if ((offset >= IO_SUPERIO_BASE) && |
| (offset < IO_SUPERIO_BASE + IO_SUPERIO_EXTENT)) { |
| /* |
| * SMSC FDC37C93xAPM SuperIO chip |
| * |
| * Configuration Registers |
| */ |
| result = IO_SUPERIO_PHYS + (offset << 1); |
| } else if (((offset >= IO_IDE1_BASE) && |
| (offset < IO_IDE1_BASE + IO_IDE_EXTENT)) || |
| (offset == IO_IDE1_MISC)) { |
| /* |
| * SMSC FDC37C93xAPM SuperIO chip |
| * |
| * IDE #1 |
| */ |
| result = IO_SUPERIO_PHYS + (offset << 1); |
| } else if (((offset >= IO_IDE2_BASE) && |
| (offset < IO_IDE2_BASE + IO_IDE_EXTENT)) || |
| (offset == IO_IDE2_MISC)) { |
| /* |
| * SMSC FDC37C93xAPM SuperIO chip |
| * |
| * IDE #2 |
| */ |
| result = IO_SUPERIO_PHYS + (offset << 1); |
| } else if ((offset >= IO_SERIAL1_BASE) && |
| (offset < IO_SERIAL1_BASE + IO_SERIAL_EXTENT)) { |
| /* |
| * SMSC FDC37C93xAPM SuperIO chip |
| * |
| * Serial #1 |
| */ |
| result = IO_SUPERIO_PHYS + (offset << 1); |
| } else if ((offset >= IO_SERIAL2_BASE) && |
| (offset < IO_SERIAL2_BASE + IO_SERIAL_EXTENT)) { |
| /* |
| * SMSC FDC37C93xAPM SuperIO chip |
| * |
| * Serial #2 |
| */ |
| result = IO_SUPERIO_PHYS + (offset << 1); |
| } else if ((offset >= IO_ISP1161_BASE) && |
| (offset < IO_ISP1161_BASE + IO_ISP1161_EXTENT)) { |
| /* |
| * Philips USB ISP1161x chip |
| */ |
| result = IO_ISP1161_PHYS + offset - IO_ISP1161_BASE; |
| } else { |
| /* |
| * safe default. |
| */ |
| printk("Warning: unexpected port in %s( offset = 0x%lx )\n", |
| __func__, offset); |
| result = PVR; |
| } |
| |
| return (void __iomem *)result; |
| } |