| /* |
| * Copyright 2007-2009 Analog Devices Inc. |
| * Philippe Gerum <rpm@xenomai.org> |
| * |
| * Licensed under the GPL-2 or later. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/sched.h> |
| #include <linux/delay.h> |
| #include <asm/smp.h> |
| #include <asm/dma.h> |
| #include <asm/time.h> |
| |
| static DEFINE_SPINLOCK(boot_lock); |
| |
| /* |
| * platform_init_cpus() - Tell the world about how many cores we |
| * have. This is called while setting up the architecture support |
| * (setup_arch()), so don't be too demanding here with respect to |
| * available kernel services. |
| */ |
| |
| void __init platform_init_cpus(void) |
| { |
| struct cpumask mask; |
| |
| cpumask_set_cpu(0, &mask); /* CoreA */ |
| cpumask_set_cpu(1, &mask); /* CoreB */ |
| init_cpu_possible(&mask); |
| } |
| |
| void __init platform_prepare_cpus(unsigned int max_cpus) |
| { |
| struct cpumask mask; |
| |
| bfin_relocate_coreb_l1_mem(); |
| |
| /* Both cores ought to be present on a bf561! */ |
| cpumask_set_cpu(0, &mask); /* CoreA */ |
| cpumask_set_cpu(1, &mask); /* CoreB */ |
| init_cpu_present(&mask); |
| } |
| |
| int __init setup_profiling_timer(unsigned int multiplier) /* not supported */ |
| { |
| return -EINVAL; |
| } |
| |
| void platform_secondary_init(unsigned int cpu) |
| { |
| /* Clone setup for peripheral interrupt sources from CoreA. */ |
| bfin_write_SICB_IMASK0(bfin_read_SIC_IMASK0()); |
| bfin_write_SICB_IMASK1(bfin_read_SIC_IMASK1()); |
| SSYNC(); |
| |
| /* Clone setup for IARs from CoreA. */ |
| bfin_write_SICB_IAR0(bfin_read_SIC_IAR0()); |
| bfin_write_SICB_IAR1(bfin_read_SIC_IAR1()); |
| bfin_write_SICB_IAR2(bfin_read_SIC_IAR2()); |
| bfin_write_SICB_IAR3(bfin_read_SIC_IAR3()); |
| bfin_write_SICB_IAR4(bfin_read_SIC_IAR4()); |
| bfin_write_SICB_IAR5(bfin_read_SIC_IAR5()); |
| bfin_write_SICB_IAR6(bfin_read_SIC_IAR6()); |
| bfin_write_SICB_IAR7(bfin_read_SIC_IAR7()); |
| bfin_write_SICB_IWR0(IWR_DISABLE_ALL); |
| bfin_write_SICB_IWR1(IWR_DISABLE_ALL); |
| SSYNC(); |
| |
| /* We are done with local CPU inits, unblock the boot CPU. */ |
| spin_lock(&boot_lock); |
| spin_unlock(&boot_lock); |
| } |
| |
| int platform_boot_secondary(unsigned int cpu, struct task_struct *idle) |
| { |
| unsigned long timeout; |
| |
| printk(KERN_INFO "Booting Core B.\n"); |
| |
| spin_lock(&boot_lock); |
| |
| if ((bfin_read_SYSCR() & COREB_SRAM_INIT) == 0) { |
| /* CoreB already running, sending ipi to wakeup it */ |
| smp_send_reschedule(cpu); |
| } else { |
| /* Kick CoreB, which should start execution from CORE_SRAM_BASE. */ |
| bfin_write_SYSCR(bfin_read_SYSCR() & ~COREB_SRAM_INIT); |
| SSYNC(); |
| } |
| |
| timeout = jiffies + HZ; |
| /* release the lock and let coreb run */ |
| spin_unlock(&boot_lock); |
| while (time_before(jiffies, timeout)) { |
| if (cpu_online(cpu)) |
| break; |
| udelay(100); |
| barrier(); |
| } |
| |
| if (cpu_online(cpu)) { |
| return 0; |
| } else |
| panic("CPU%u: processor failed to boot\n", cpu); |
| } |
| |
| static const char supple0[] = "IRQ_SUPPLE_0"; |
| static const char supple1[] = "IRQ_SUPPLE_1"; |
| void __init platform_request_ipi(int irq, void *handler) |
| { |
| int ret; |
| const char *name = (irq == IRQ_SUPPLE_0) ? supple0 : supple1; |
| |
| ret = request_irq(irq, handler, IRQF_PERCPU | IRQF_NO_SUSPEND | |
| IRQF_FORCE_RESUME, name, handler); |
| if (ret) |
| panic("Cannot request %s for IPI service", name); |
| } |
| |
| void platform_send_ipi(cpumask_t callmap, int irq) |
| { |
| unsigned int cpu; |
| int offset = (irq == IRQ_SUPPLE_0) ? 6 : 8; |
| |
| for_each_cpu_mask(cpu, callmap) { |
| BUG_ON(cpu >= 2); |
| SSYNC(); |
| bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | (1 << (offset + cpu))); |
| SSYNC(); |
| } |
| } |
| |
| void platform_send_ipi_cpu(unsigned int cpu, int irq) |
| { |
| int offset = (irq == IRQ_SUPPLE_0) ? 6 : 8; |
| BUG_ON(cpu >= 2); |
| SSYNC(); |
| bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | (1 << (offset + cpu))); |
| SSYNC(); |
| } |
| |
| void platform_clear_ipi(unsigned int cpu, int irq) |
| { |
| int offset = (irq == IRQ_SUPPLE_0) ? 10 : 12; |
| BUG_ON(cpu >= 2); |
| SSYNC(); |
| bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | (1 << (offset + cpu))); |
| SSYNC(); |
| } |
| |
| /* |
| * Setup core B's local core timer. |
| * In SMP, core timer is used for clock event device. |
| */ |
| void bfin_local_timer_setup(void) |
| { |
| #if defined(CONFIG_TICKSOURCE_CORETMR) |
| struct irq_data *data = irq_get_irq_data(IRQ_CORETMR); |
| struct irq_chip *chip = irq_data_get_irq_chip(data); |
| |
| bfin_coretmr_init(); |
| bfin_coretmr_clockevent_init(); |
| |
| chip->irq_unmask(data); |
| #else |
| /* Power down the core timer, just to play safe. */ |
| bfin_write_TCNTL(0); |
| #endif |
| |
| } |